Kerio Control 歷史版本列表
![](https://downloadbrother.com/sfimages/icons/firewalls-and-security/kerio-control-icon-32.png)
更新時間:2024-02-23
更新細節:
更新時間:2024-02-23
更新細節:
What's new in this version:
Kerio Control 9.4.4 Build 8407
New:
- IKEv2 support
Improved:
- Significant overall performance improvements
- More accurate AppManager connectivity display
- Appliances removed from AppManager stop processing AppManager-related data
Fixed:
- NG511 appliance performance degradation in HA mode
- Discrepancy between Interface Window and VPN Clients Window for users connected via VPN
- IPSec Tunnels are no longer disconnected when the configuration is updated
- SNMP is functional
- 2FA verification message incorrectly showing default "30 days" expiration value
- Custom logo not displayed on the login page
- Corrected Mexico local time
- Multiple memory leaks fixed
- No checksum errors recorded on winroute.cfg after performing IPS or KerioControl updates
- Errors encountered on some websites during categorization
- CIDR address formats within the shared definitions are properly handled when synchronized via AppManager
Kerio Control 9.4.3 Build 8388
- Change log not available for this version
Kerio Control 9.4.3 Build 8377
- Change log not available for this version
Kerio Control 9.4.3 Build 8353
- Change log not available for this version
Kerio Control 9.4.3 Build 8243
- Change log not available for this version
Kerio Control 9.4.2 Build 7285
New:
- Kernel upgrade
- 2FA token expiration configuration for VPN
- HTTP/S redirection in reverse proxy
Fixed:
- Issues with Mac upload speed degradation
- Updated IPSec VPN
- Updated IPsec SNAT
- WiFi authentication errors with Radius
Kerio Control 9.3.6 Build 5808
- Change log not available for this version
Kerio Control 9.3.5 Build 4367
- Change log not available for this version
Kerio Control 9.3.4 Build 3795
- Change log not available for this version
Kerio Control 9.3.3 Build 3634
- Change log not available for this version
Kerio Control 9.3.2 Build 3557
- Change log not available for this version
Kerio Control 9.3.1 Build 3465
- Change log not available for this version
Kerio Control 9.3.0 Build 3273
- High Availability - Active/Passive - Enable a secondary (Slave) identical Kerio Control to take over when the primary (Master) device is offline
- IKEv2 Support (enable via console)
- Fixed: Primary IP for WAN interface changes after reboot
- Fixed: Last few entries of DHCP reservation list not displayed correctly in Firefox
- Fixed: Address group still visible after being deleted
- Fixed: IPSEC Tunnel drops in certain circumstances
- Fixed: Configuration restore wizard IP addresses not populating
- Fixed: Teamviewer application not blocked by Content Filter
- Fixed: SafeSearch blocks Yandex
Kerio Control 9.2.9 Build 3171
- Swap support
- Fixed: Kerio VPN - Disabled insecure and vulnerable protocol Blowfish
- Fixed: Optimized Snort priority for improved traffic bandwidth
- Fixed: Changed affinity for snort process for improved traffic bandwidth
- Fixed: HW NG500 crash
- Older Kerio VPN Clients are not able to connect using this build. To allow please follow the following steps.
- Open ssh connection or from console
- Go to /opt/kerio/winroute folder
- Run ./tinydbclient "Update VPN set AllowBlowfishCipher=1"
Kerio Control 9.2.8 Build 3061
- Change log not available for this version
Kerio Control 9.2.7 Build 2921
- 2-Step verification UI improvements
- DHCP leases column added in DHCP
- DST notification added to time zone settings page
- IPv6 anti-spoofing functionality added
- Linux VPN client now supports systemd
- Unify approach to entering URL in rules
- Upgraded Firefox install CA walkthrough screenshots
- Fixed: Categories are not getting merged one when testing the miscategorized URLs in the Content filter
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Crash with error handling during domain joining/leaving
- Fixed: Disable view user statistic when multiple users are selected
- Fixed: Entries with multiple members in Service list not getting searched
- Fixed: HTTP Cache dump should work without selected cache any message type
- Fixed: Interface group ordering disabled
- Fixed: IPSec connection is dropped every 3 hours
- Fixed: IPsec: Some fields are cleared when Cipher configuration dialog is closed
- Fixed: P2P suspicious connection detection
- Fixed: Prevent consuming license usage when there is spoofing IPv6 connection
- Fixed: Show details while joining AD fails because of time skew
- Fixed: Technical support button on dashboard redirects to GFI support now
- Fixed: Tunnel reset when cipher config dialog is closed
- Fixed: User right column sort by rendered value
- Fixed: SafeSearch blocking Google Cloud Messaging
Kerio Control 9.2.6 Build 2720
- Added support for Encrypting personal/sensitive data stored on the disk
- Fixed: Crash in some occasions due to empty HTTP header name
Kerio Control 9.2.5 Build 2641
- Change log not available for this version
Kerio Control 9.2.5 Build 2619
- Change log not available for this version
Kerio Control 9.2.5 Build 2587
- Fixed: NTLM Authentication issue
- Fixed: 2 Step Authentication issue
- Fixed: Recompilation of WIFI driver with different flags for more compatibility
Kerio Control 9.2.5 Build 2570
- Fixed: Crash every hour when sending email for invalid user after antivirus scanning
Kerio Control 9.2.5 Build 2532
- Removal of PHP server-side scripting from Web Interface
- Upgrade of strongSwan 5.5.1
- Improved starting/stopping of VPN Client on Debian 8
- VPN Client now supports macOS High Sierra
- Fixed: Translation issues
- Fixed: User preferences automatic language set to detected language
- Fixed: Installation of VPN Client fails on Windows 7, 8
- Fixed: The WiFi driver has been updated for better compatibility and stability
- Fixed: Dashboard Traffic Chart Tile does not show relevant units
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Empty exclusions for connection limit corrupts config
- Fixed: View Guest users in Kerio Control Statistics opens stats of "Not logged in" user
- Fixed: WebAdmin error during configuration import
- Fixed: Install CA screenshots are from old FireFox
- Fixed: Menu bar icon not optimized for Mac with retina
- Fixed: Remote Services: Data are not reloaded when changes are discarded on screen reload
- Fixed: Bandwidth management traffic dialog: wrong info text
- Fixed: Crash in ThreadCpuTime, when gdata.start_error = 1
- Fixed: assert in DhcpLeaseTab::save()
- Fixed: W10 Edge cannot login and access web interface if IPv6 is enabled
- Fixed: missing limiter of AV check failed alert
- Fixed: Russian Business Network blacklist is missing in IPS update
- Fixed: Remove unsecure DES-CBC3-SHA from cipherlist
- Fixed: Wi-Fi should be WiFi (legal requirement)
- Fixed: Kerio VPN tunnels are using local networks defined in IPsec section (as Remote networks)
- Fixed: Exported cfg. backup is corrupted
- Fixed: Sending notifications from Kerio Control - InCorrect Format of notification
- Fixed: On Groups page, "Rights" column is not sorted in correct order
Kerio Control 9.2.3 Build 2219
- OpenSSL upgraded from 1.0.1u to 1.0.2j
- Updated country list used in SSL Certificate definition
- Fixed: CPU lock due to winroute loop
Kerio Control 9.2.2 Build 2172 - Sophos Anti-Virus replaced with Kerio Antivirus which is based on the Bitdefender antivirus engine
- Fixed: Stability issue, Kerio Control was unresponsive
- Fixed: 0.0.0.0 was displayed instead of IP address of IPSec VPN client
- Fixed: HTTP cache could not be eraseed
- Fixed: Application detection didn't work with HTTP Header "Content-Type"
- Fixed: Invalid certificate was created by HTTPS filtering
更新時間:2023-10-10
更新細節:
更新時間:2023-10-10
更新細節:
What's new in this version:
- Change log not available for this version
Kerio Control 9.4.2 Build 7285
New:
- Kernel upgrade
- 2FA token expiration configuration for VPN
- HTTP/S redirection in reverse proxy
Fixed:
- Issues with Mac upload speed degradation
- Updated IPSec VPN
- Updated IPsec SNAT
- WiFi authentication errors with Radius
Kerio Control 9.3.6 Build 5808
- Change log not available for this version
Kerio Control 9.3.5 Build 4367
- Change log not available for this version
Kerio Control 9.3.4 Build 3795
- Change log not available for this version
Kerio Control 9.3.3 Build 3634
- Change log not available for this version
Kerio Control 9.3.2 Build 3557
- Change log not available for this version
Kerio Control 9.3.1 Build 3465
- Change log not available for this version
Kerio Control 9.3.0 Build 3273
- High Availability - Active/Passive - Enable a secondary (Slave) identical Kerio Control to take over when the primary (Master) device is offline
- IKEv2 Support (enable via console)
- Fixed: Primary IP for WAN interface changes after reboot
- Fixed: Last few entries of DHCP reservation list not displayed correctly in Firefox
- Fixed: Address group still visible after being deleted
- Fixed: IPSEC Tunnel drops in certain circumstances
- Fixed: Configuration restore wizard IP addresses not populating
- Fixed: Teamviewer application not blocked by Content Filter
- Fixed: SafeSearch blocks Yandex
Kerio Control 9.2.9 Build 3171
- Swap support
- Fixed: Kerio VPN - Disabled insecure and vulnerable protocol Blowfish
- Fixed: Optimized Snort priority for improved traffic bandwidth
- Fixed: Changed affinity for snort process for improved traffic bandwidth
- Fixed: HW NG500 crash
- Older Kerio VPN Clients are not able to connect using this build. To allow please follow the following steps.
- Open ssh connection or from console
- Go to /opt/kerio/winroute folder
- Run ./tinydbclient "Update VPN set AllowBlowfishCipher=1"
Kerio Control 9.2.8 Build 3061
- Change log not available for this version
Kerio Control 9.2.7 Build 2921
- 2-Step verification UI improvements
- DHCP leases column added in DHCP
- DST notification added to time zone settings page
- IPv6 anti-spoofing functionality added
- Linux VPN client now supports systemd
- Unify approach to entering URL in rules
- Upgraded Firefox install CA walkthrough screenshots
- Fixed: Categories are not getting merged one when testing the miscategorized URLs in the Content filter
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Crash with error handling during domain joining/leaving
- Fixed: Disable view user statistic when multiple users are selected
- Fixed: Entries with multiple members in Service list not getting searched
- Fixed: HTTP Cache dump should work without selected cache any message type
- Fixed: Interface group ordering disabled
- Fixed: IPSec connection is dropped every 3 hours
- Fixed: IPsec: Some fields are cleared when Cipher configuration dialog is closed
- Fixed: P2P suspicious connection detection
- Fixed: Prevent consuming license usage when there is spoofing IPv6 connection
- Fixed: Show details while joining AD fails because of time skew
- Fixed: Technical support button on dashboard redirects to GFI support now
- Fixed: Tunnel reset when cipher config dialog is closed
- Fixed: User right column sort by rendered value
- Fixed: SafeSearch blocking Google Cloud Messaging
Kerio Control 9.2.6 Build 2720
- Added support for Encrypting personal/sensitive data stored on the disk
- Fixed: Crash in some occasions due to empty HTTP header name
Kerio Control 9.2.5 Build 2641
- Change log not available for this version
Kerio Control 9.2.5 Build 2619
- Change log not available for this version
Kerio Control 9.2.5 Build 2587
- Fixed: NTLM Authentication issue
- Fixed: 2 Step Authentication issue
- Fixed: Recompilation of WIFI driver with different flags for more compatibility
Kerio Control 9.2.5 Build 2570
- Fixed: Crash every hour when sending email for invalid user after antivirus scanning
Kerio Control 9.2.5 Build 2532
- Removal of PHP server-side scripting from Web Interface
- Upgrade of strongSwan 5.5.1
- Improved starting/stopping of VPN Client on Debian 8
- VPN Client now supports macOS High Sierra
- Fixed: Translation issues
- Fixed: User preferences automatic language set to detected language
- Fixed: Installation of VPN Client fails on Windows 7, 8
- Fixed: The WiFi driver has been updated for better compatibility and stability
- Fixed: Dashboard Traffic Chart Tile does not show relevant units
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Empty exclusions for connection limit corrupts config
- Fixed: View Guest users in Kerio Control Statistics opens stats of "Not logged in" user
- Fixed: WebAdmin error during configuration import
- Fixed: Install CA screenshots are from old FireFox
- Fixed: Menu bar icon not optimized for Mac with retina
- Fixed: Remote Services: Data are not reloaded when changes are discarded on screen reload
- Fixed: Bandwidth management traffic dialog: wrong info text
- Fixed: Crash in ThreadCpuTime, when gdata.start_error = 1
- Fixed: assert in DhcpLeaseTab::save()
- Fixed: W10 Edge cannot login and access web interface if IPv6 is enabled
- Fixed: missing limiter of AV check failed alert
- Fixed: Russian Business Network blacklist is missing in IPS update
- Fixed: Remove unsecure DES-CBC3-SHA from cipherlist
- Fixed: Wi-Fi should be WiFi (legal requirement)
- Fixed: Kerio VPN tunnels are using local networks defined in IPsec section (as Remote networks)
- Fixed: Exported cfg. backup is corrupted
- Fixed: Sending notifications from Kerio Control - InCorrect Format of notification
- Fixed: On Groups page, "Rights" column is not sorted in correct order
Kerio Control 9.2.3 Build 2219
- OpenSSL upgraded from 1.0.1u to 1.0.2j
- Updated country list used in SSL Certificate definition
- Fixed: CPU lock due to winroute loop
- Fixed: Stability issue, Kerio Control was unresponsive
- Fixed: 0.0.0.0 was displayed instead of IP address of IPSec VPN client
- Fixed: HTTP cache could not be eraseed
- Fixed: Application detection didn't work with HTTP Header "Content-Type"
- Fixed: Invalid certificate was created by HTTPS filtering
更新時間:2023-10-10
更新細節:
What's new in this version:
- Change log not available for this version
Kerio Control 9.4.2 Build 7285
New:
- Kernel upgrade
- 2FA token expiration configuration for VPN
- HTTP/S redirection in reverse proxy
Fixed:
- Issues with Mac upload speed degradation
- Updated IPSec VPN
- Updated IPsec SNAT
- WiFi authentication errors with Radius
Kerio Control 9.3.6 Build 5808
- Change log not available for this version
Kerio Control 9.3.5 Build 4367
- Change log not available for this version
Kerio Control 9.3.4 Build 3795
- Change log not available for this version
Kerio Control 9.3.3 Build 3634
- Change log not available for this version
Kerio Control 9.3.2 Build 3557
- Change log not available for this version
Kerio Control 9.3.1 Build 3465
- Change log not available for this version
Kerio Control 9.3.0 Build 3273
- High Availability - Active/Passive - Enable a secondary (Slave) identical Kerio Control to take over when the primary (Master) device is offline
- IKEv2 Support (enable via console)
- Fixed: Primary IP for WAN interface changes after reboot
- Fixed: Last few entries of DHCP reservation list not displayed correctly in Firefox
- Fixed: Address group still visible after being deleted
- Fixed: IPSEC Tunnel drops in certain circumstances
- Fixed: Configuration restore wizard IP addresses not populating
- Fixed: Teamviewer application not blocked by Content Filter
- Fixed: SafeSearch blocks Yandex
Kerio Control 9.2.9 Build 3171
- Swap support
- Fixed: Kerio VPN - Disabled insecure and vulnerable protocol Blowfish
- Fixed: Optimized Snort priority for improved traffic bandwidth
- Fixed: Changed affinity for snort process for improved traffic bandwidth
- Fixed: HW NG500 crash
- Older Kerio VPN Clients are not able to connect using this build. To allow please follow the following steps.
- Open ssh connection or from console
- Go to /opt/kerio/winroute folder
- Run ./tinydbclient "Update VPN set AllowBlowfishCipher=1"
Kerio Control 9.2.8 Build 3061
- Change log not available for this version
Kerio Control 9.2.7 Build 2921
- 2-Step verification UI improvements
- DHCP leases column added in DHCP
- DST notification added to time zone settings page
- IPv6 anti-spoofing functionality added
- Linux VPN client now supports systemd
- Unify approach to entering URL in rules
- Upgraded Firefox install CA walkthrough screenshots
- Fixed: Categories are not getting merged one when testing the miscategorized URLs in the Content filter
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Crash with error handling during domain joining/leaving
- Fixed: Disable view user statistic when multiple users are selected
- Fixed: Entries with multiple members in Service list not getting searched
- Fixed: HTTP Cache dump should work without selected cache any message type
- Fixed: Interface group ordering disabled
- Fixed: IPSec connection is dropped every 3 hours
- Fixed: IPsec: Some fields are cleared when Cipher configuration dialog is closed
- Fixed: P2P suspicious connection detection
- Fixed: Prevent consuming license usage when there is spoofing IPv6 connection
- Fixed: Show details while joining AD fails because of time skew
- Fixed: Technical support button on dashboard redirects to GFI support now
- Fixed: Tunnel reset when cipher config dialog is closed
- Fixed: User right column sort by rendered value
- Fixed: SafeSearch blocking Google Cloud Messaging
Kerio Control 9.2.6 Build 2720
- Added support for Encrypting personal/sensitive data stored on the disk
- Fixed: Crash in some occasions due to empty HTTP header name
Kerio Control 9.2.5 Build 2641
- Change log not available for this version
Kerio Control 9.2.5 Build 2619
- Change log not available for this version
Kerio Control 9.2.5 Build 2587
- Fixed: NTLM Authentication issue
- Fixed: 2 Step Authentication issue
- Fixed: Recompilation of WIFI driver with different flags for more compatibility
Kerio Control 9.2.5 Build 2570
- Fixed: Crash every hour when sending email for invalid user after antivirus scanning
Kerio Control 9.2.5 Build 2532
- Removal of PHP server-side scripting from Web Interface
- Upgrade of strongSwan 5.5.1
- Improved starting/stopping of VPN Client on Debian 8
- VPN Client now supports macOS High Sierra
- Fixed: Translation issues
- Fixed: User preferences automatic language set to detected language
- Fixed: Installation of VPN Client fails on Windows 7, 8
- Fixed: The WiFi driver has been updated for better compatibility and stability
- Fixed: Dashboard Traffic Chart Tile does not show relevant units
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Empty exclusions for connection limit corrupts config
- Fixed: View Guest users in Kerio Control Statistics opens stats of "Not logged in" user
- Fixed: WebAdmin error during configuration import
- Fixed: Install CA screenshots are from old FireFox
- Fixed: Menu bar icon not optimized for Mac with retina
- Fixed: Remote Services: Data are not reloaded when changes are discarded on screen reload
- Fixed: Bandwidth management traffic dialog: wrong info text
- Fixed: Crash in ThreadCpuTime, when gdata.start_error = 1
- Fixed: assert in DhcpLeaseTab::save()
- Fixed: W10 Edge cannot login and access web interface if IPv6 is enabled
- Fixed: missing limiter of AV check failed alert
- Fixed: Russian Business Network blacklist is missing in IPS update
- Fixed: Remove unsecure DES-CBC3-SHA from cipherlist
- Fixed: Wi-Fi should be WiFi (legal requirement)
- Fixed: Kerio VPN tunnels are using local networks defined in IPsec section (as Remote networks)
- Fixed: Exported cfg. backup is corrupted
- Fixed: Sending notifications from Kerio Control - InCorrect Format of notification
- Fixed: On Groups page, "Rights" column is not sorted in correct order
Kerio Control 9.2.3 Build 2219
- OpenSSL upgraded from 1.0.1u to 1.0.2j
- Updated country list used in SSL Certificate definition
- Fixed: CPU lock due to winroute loop
- Fixed: Stability issue, Kerio Control was unresponsive
- Fixed: 0.0.0.0 was displayed instead of IP address of IPSec VPN client
- Fixed: HTTP cache could not be eraseed
- Fixed: Application detection didn't work with HTTP Header "Content-Type"
- Fixed: Invalid certificate was created by HTTPS filtering
更新時間:2020-08-28
更新細節:
What's new in this version:
- Change log not available for this version
Kerio Control 9.3.4 Build 3795
- Change log not available for this version
Kerio Control 9.3.3 Build 3634
- Change log not available for this version
Kerio Control 9.3.2 Build 3557
- Change log not available for this version
Kerio Control 9.3.1 Build 3465
- Change log not available for this version
Kerio Control 9.3.0 Build 3273
- High Availability - Active/Passive - Enable a secondary (Slave) identical Kerio Control to take over when the primary (Master) device is offline
- IKEv2 Support (enable via console)
- Fixed: Primary IP for WAN interface changes after reboot
- Fixed: Last few entries of DHCP reservation list not displayed correctly in Firefox
- Fixed: Address group still visible after being deleted
- Fixed: IPSEC Tunnel drops in certain circumstances
- Fixed: Configuration restore wizard IP addresses not populating
- Fixed: Teamviewer application not blocked by Content Filter
- Fixed: SafeSearch blocks Yandex
Kerio Control 9.2.9 Build 3171
- Swap support
- Fixed: Kerio VPN - Disabled insecure and vulnerable protocol Blowfish
- Fixed: Optimized Snort priority for improved traffic bandwidth
- Fixed: Changed affinity for snort process for improved traffic bandwidth
- Fixed: HW NG500 crash
- Older Kerio VPN Clients are not able to connect using this build. To allow please follow the following steps.
- Open ssh connection or from console
- Go to /opt/kerio/winroute folder
- Run ./tinydbclient "Update VPN set AllowBlowfishCipher=1"
Kerio Control 9.2.8 Build 3061
- Change log not available for this version
Kerio Control 9.2.7 Build 2921
- 2-Step verification UI improvements
- DHCP leases column added in DHCP
- DST notification added to time zone settings page
- IPv6 anti-spoofing functionality added
- Linux VPN client now supports systemd
- Unify approach to entering URL in rules
- Upgraded Firefox install CA walkthrough screenshots
- Fixed: Categories are not getting merged one when testing the miscategorized URLs in the Content filter
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Crash with error handling during domain joining/leaving
- Fixed: Disable view user statistic when multiple users are selected
- Fixed: Entries with multiple members in Service list not getting searched
- Fixed: HTTP Cache dump should work without selected cache any message type
- Fixed: Interface group ordering disabled
- Fixed: IPSec connection is dropped every 3 hours
- Fixed: IPsec: Some fields are cleared when Cipher configuration dialog is closed
- Fixed: P2P suspicious connection detection
- Fixed: Prevent consuming license usage when there is spoofing IPv6 connection
- Fixed: Show details while joining AD fails because of time skew
- Fixed: Technical support button on dashboard redirects to GFI support now
- Fixed: Tunnel reset when cipher config dialog is closed
- Fixed: User right column sort by rendered value
- Fixed: SafeSearch blocking Google Cloud Messaging
Kerio Control 9.2.6 Build 2720
- Added support for Encrypting personal/sensitive data stored on the disk
- Fixed: Crash in some occasions due to empty HTTP header name
Kerio Control 9.2.5 Build 2641
- Change log not available for this version
Kerio Control 9.2.5 Build 2619
- Change log not available for this version
Kerio Control 9.2.5 Build 2587
- Fixed: NTLM Authentication issue
- Fixed: 2 Step Authentication issue
- Fixed: Recompilation of WIFI driver with different flags for more compatibility
Kerio Control 9.2.5 Build 2570
- Fixed: Crash every hour when sending email for invalid user after antivirus scanning
Kerio Control 9.2.5 Build 2532
- Removal of PHP server-side scripting from Web Interface
- Upgrade of strongSwan 5.5.1
- Improved starting/stopping of VPN Client on Debian 8
- VPN Client now supports macOS High Sierra
- Fixed: Translation issues
- Fixed: User preferences automatic language set to detected language
- Fixed: Installation of VPN Client fails on Windows 7, 8
- Fixed: The WiFi driver has been updated for better compatibility and stability
- Fixed: Dashboard Traffic Chart Tile does not show relevant units
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Empty exclusions for connection limit corrupts config
- Fixed: View Guest users in Kerio Control Statistics opens stats of "Not logged in" user
- Fixed: WebAdmin error during configuration import
- Fixed: Install CA screenshots are from old FireFox
- Fixed: Menu bar icon not optimized for Mac with retina
- Fixed: Remote Services: Data are not reloaded when changes are discarded on screen reload
- Fixed: Bandwidth management traffic dialog: wrong info text
- Fixed: Crash in ThreadCpuTime, when gdata.start_error = 1
- Fixed: assert in DhcpLeaseTab::save()
- Fixed: W10 Edge cannot login and access web interface if IPv6 is enabled
- Fixed: missing limiter of AV check failed alert
- Fixed: Russian Business Network blacklist is missing in IPS update
- Fixed: Remove unsecure DES-CBC3-SHA from cipherlist
- Fixed: Wi-Fi should be WiFi (legal requirement)
- Fixed: Kerio VPN tunnels are using local networks defined in IPsec section (as Remote networks)
- Fixed: Exported cfg. backup is corrupted
- Fixed: Sending notifications from Kerio Control - InCorrect Format of notification
- Fixed: On Groups page, "Rights" column is not sorted in correct order
Kerio Control 9.2.3 Build 2219
- OpenSSL upgraded from 1.0.1u to 1.0.2j
- Updated country list used in SSL Certificate definition
- Fixed: CPU lock due to winroute loop
- Fixed: Stability issue, Kerio Control was unresponsive
- Fixed: 0.0.0.0 was displayed instead of IP address of IPSec VPN client
- Fixed: HTTP cache could not be eraseed
- Fixed: Application detection didn't work with HTTP Header "Content-Type"
- Fixed: Invalid certificate was created by HTTPS filtering
更新時間:2020-02-13
更新細節:
What's new in this version:
- Change log not available for this version
Kerio Control 9.3.3 Build 3634
- Change log not available for this version
Kerio Control 9.3.2 Build 3557
- Change log not available for this version
Kerio Control 9.3.1 Build 3465
- Change log not available for this version
Kerio Control 9.3.0 Build 3273
- High Availability - Active/Passive - Enable a secondary (Slave) identical Kerio Control to take over when the primary (Master) device is offline
- IKEv2 Support (enable via console)
- Fixed: Primary IP for WAN interface changes after reboot
- Fixed: Last few entries of DHCP reservation list not displayed correctly in Firefox
- Fixed: Address group still visible after being deleted
- Fixed: IPSEC Tunnel drops in certain circumstances
- Fixed: Configuration restore wizard IP addresses not populating
- Fixed: Teamviewer application not blocked by Content Filter
- Fixed: SafeSearch blocks Yandex
Kerio Control 9.2.9 Build 3171
- Swap support
- Fixed: Kerio VPN - Disabled insecure and vulnerable protocol Blowfish
- Fixed: Optimized Snort priority for improved traffic bandwidth
- Fixed: Changed affinity for snort process for improved traffic bandwidth
- Fixed: HW NG500 crash
- Older Kerio VPN Clients are not able to connect using this build. To allow please follow the following steps.
- Open ssh connection or from console
- Go to /opt/kerio/winroute folder
- Run ./tinydbclient "Update VPN set AllowBlowfishCipher=1"
Kerio Control 9.2.8 Build 3061
- Change log not available for this version
Kerio Control 9.2.7 Build 2921
- 2-Step verification UI improvements
- DHCP leases column added in DHCP
- DST notification added to time zone settings page
- IPv6 anti-spoofing functionality added
- Linux VPN client now supports systemd
- Unify approach to entering URL in rules
- Upgraded Firefox install CA walkthrough screenshots
- Fixed: Categories are not getting merged one when testing the miscategorized URLs in the Content filter
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Crash with error handling during domain joining/leaving
- Fixed: Disable view user statistic when multiple users are selected
- Fixed: Entries with multiple members in Service list not getting searched
- Fixed: HTTP Cache dump should work without selected cache any message type
- Fixed: Interface group ordering disabled
- Fixed: IPSec connection is dropped every 3 hours
- Fixed: IPsec: Some fields are cleared when Cipher configuration dialog is closed
- Fixed: P2P suspicious connection detection
- Fixed: Prevent consuming license usage when there is spoofing IPv6 connection
- Fixed: Show details while joining AD fails because of time skew
- Fixed: Technical support button on dashboard redirects to GFI support now
- Fixed: Tunnel reset when cipher config dialog is closed
- Fixed: User right column sort by rendered value
- Fixed: SafeSearch blocking Google Cloud Messaging
Kerio Control 9.2.6 Build 2720
- Added support for Encrypting personal/sensitive data stored on the disk
- Fixed: Crash in some occasions due to empty HTTP header name
Kerio Control 9.2.5 Build 2641
- Change log not available for this version
Kerio Control 9.2.5 Build 2619
- Change log not available for this version
Kerio Control 9.2.5 Build 2587
- Fixed: NTLM Authentication issue
- Fixed: 2 Step Authentication issue
- Fixed: Recompilation of WIFI driver with different flags for more compatibility
Kerio Control 9.2.5 Build 2570
- Fixed: Crash every hour when sending email for invalid user after antivirus scanning
Kerio Control 9.2.5 Build 2532
- Removal of PHP server-side scripting from Web Interface
- Upgrade of strongSwan 5.5.1
- Improved starting/stopping of VPN Client on Debian 8
- VPN Client now supports macOS High Sierra
- Fixed: Translation issues
- Fixed: User preferences automatic language set to detected language
- Fixed: Installation of VPN Client fails on Windows 7, 8
- Fixed: The WiFi driver has been updated for better compatibility and stability
- Fixed: Dashboard Traffic Chart Tile does not show relevant units
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Empty exclusions for connection limit corrupts config
- Fixed: View Guest users in Kerio Control Statistics opens stats of "Not logged in" user
- Fixed: WebAdmin error during configuration import
- Fixed: Install CA screenshots are from old FireFox
- Fixed: Menu bar icon not optimized for Mac with retina
- Fixed: Remote Services: Data are not reloaded when changes are discarded on screen reload
- Fixed: Bandwidth management traffic dialog: wrong info text
- Fixed: Crash in ThreadCpuTime, when gdata.start_error = 1
- Fixed: assert in DhcpLeaseTab::save()
- Fixed: W10 Edge cannot login and access web interface if IPv6 is enabled
- Fixed: missing limiter of AV check failed alert
- Fixed: Russian Business Network blacklist is missing in IPS update
- Fixed: Remove unsecure DES-CBC3-SHA from cipherlist
- Fixed: Wi-Fi should be WiFi (legal requirement)
- Fixed: Kerio VPN tunnels are using local networks defined in IPsec section (as Remote networks)
- Fixed: Exported cfg. backup is corrupted
- Fixed: Sending notifications from Kerio Control - InCorrect Format of notification
- Fixed: On Groups page, "Rights" column is not sorted in correct order
Kerio Control 9.2.3 Build 2219
- OpenSSL upgraded from 1.0.1u to 1.0.2j
- Updated country list used in SSL Certificate definition
- Fixed: CPU lock due to winroute loop
- Fixed: Stability issue, Kerio Control was unresponsive
- Fixed: 0.0.0.0 was displayed instead of IP address of IPSec VPN client
- Fixed: HTTP cache could not be eraseed
- Fixed: Application detection didn't work with HTTP Header "Content-Type"
- Fixed: Invalid certificate was created by HTTPS filtering
更新時間:2019-12-27
更新細節:
What's new in this version:
- Change log not available for this version
Kerio Control 9.3.2 Build 3557
- Change log not available for this version
Kerio Control 9.3.1 Build 3465
- Change log not available for this version
Kerio Control 9.3.0 Build 3273
- High Availability - Active/Passive - Enable a secondary (Slave) identical Kerio Control to take over when the primary (Master) device is offline
- IKEv2 Support (enable via console)
- Fixed: Primary IP for WAN interface changes after reboot
- Fixed: Last few entries of DHCP reservation list not displayed correctly in Firefox
- Fixed: Address group still visible after being deleted
- Fixed: IPSEC Tunnel drops in certain circumstances
- Fixed: Configuration restore wizard IP addresses not populating
- Fixed: Teamviewer application not blocked by Content Filter
- Fixed: SafeSearch blocks Yandex
Kerio Control 9.2.9 Build 3171
- Swap support
- Fixed: Kerio VPN - Disabled insecure and vulnerable protocol Blowfish
- Fixed: Optimized Snort priority for improved traffic bandwidth
- Fixed: Changed affinity for snort process for improved traffic bandwidth
- Fixed: HW NG500 crash
- Older Kerio VPN Clients are not able to connect using this build. To allow please follow the following steps.
- Open ssh connection or from console
- Go to /opt/kerio/winroute folder
- Run ./tinydbclient "Update VPN set AllowBlowfishCipher=1"
Kerio Control 9.2.8 Build 3061
- Change log not available for this version
Kerio Control 9.2.7 Build 2921
- 2-Step verification UI improvements
- DHCP leases column added in DHCP
- DST notification added to time zone settings page
- IPv6 anti-spoofing functionality added
- Linux VPN client now supports systemd
- Unify approach to entering URL in rules
- Upgraded Firefox install CA walkthrough screenshots
- Fixed: Categories are not getting merged one when testing the miscategorized URLs in the Content filter
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Crash with error handling during domain joining/leaving
- Fixed: Disable view user statistic when multiple users are selected
- Fixed: Entries with multiple members in Service list not getting searched
- Fixed: HTTP Cache dump should work without selected cache any message type
- Fixed: Interface group ordering disabled
- Fixed: IPSec connection is dropped every 3 hours
- Fixed: IPsec: Some fields are cleared when Cipher configuration dialog is closed
- Fixed: P2P suspicious connection detection
- Fixed: Prevent consuming license usage when there is spoofing IPv6 connection
- Fixed: Show details while joining AD fails because of time skew
- Fixed: Technical support button on dashboard redirects to GFI support now
- Fixed: Tunnel reset when cipher config dialog is closed
- Fixed: User right column sort by rendered value
- Fixed: SafeSearch blocking Google Cloud Messaging
Kerio Control 9.2.6 Build 2720
- Added support for Encrypting personal/sensitive data stored on the disk
- Fixed: Crash in some occasions due to empty HTTP header name
Kerio Control 9.2.5 Build 2641
- Change log not available for this version
Kerio Control 9.2.5 Build 2619
- Change log not available for this version
Kerio Control 9.2.5 Build 2587
- Fixed: NTLM Authentication issue
- Fixed: 2 Step Authentication issue
- Fixed: Recompilation of WIFI driver with different flags for more compatibility
Kerio Control 9.2.5 Build 2570
- Fixed: Crash every hour when sending email for invalid user after antivirus scanning
Kerio Control 9.2.5 Build 2532
- Removal of PHP server-side scripting from Web Interface
- Upgrade of strongSwan 5.5.1
- Improved starting/stopping of VPN Client on Debian 8
- VPN Client now supports macOS High Sierra
- Fixed: Translation issues
- Fixed: User preferences automatic language set to detected language
- Fixed: Installation of VPN Client fails on Windows 7, 8
- Fixed: The WiFi driver has been updated for better compatibility and stability
- Fixed: Dashboard Traffic Chart Tile does not show relevant units
- Fixed: Changing description for multiple users changes only those who have separate configuration
- Fixed: Empty exclusions for connection limit corrupts config
- Fixed: View Guest users in Kerio Control Statistics opens stats of "Not logged in" user
- Fixed: WebAdmin error during configuration import
- Fixed: Install CA screenshots are from old FireFox
- Fixed: Menu bar icon not optimized for Mac with retina
- Fixed: Remote Services: Data are not reloaded when changes are discarded on screen reload
- Fixed: Bandwidth management traffic dialog: wrong info text
- Fixed: Crash in ThreadCpuTime, when gdata.start_error = 1
- Fixed: assert in DhcpLeaseTab::save()
- Fixed: W10 Edge cannot login and access web interface if IPv6 is enabled
- Fixed: missing limiter of AV check failed alert
- Fixed: Russian Business Network blacklist is missing in IPS update
- Fixed: Remove unsecure DES-CBC3-SHA from cipherlist
- Fixed: Wi-Fi should be WiFi (legal requirement)
- Fixed: Kerio VPN tunnels are using local networks defined in IPsec section (as Remote networks)
- Fixed: Exported cfg. backup is corrupted
- Fixed: Sending notifications from Kerio Control - InCorrect Format of notification
- Fixed: On Groups page, "Rights" column is not sorted in correct order
Kerio Control 9.2.3 Build 2219
- OpenSSL upgraded from 1.0.1u to 1.0.2j
- Updated country list used in SSL Certificate definition
- Fixed: CPU lock due to winroute loop
- Fixed: Stability issue, Kerio Control was unresponsive
- Fixed: 0.0.0.0 was displayed instead of IP address of IPSec VPN client
- Fixed: HTTP cache could not be eraseed
- Fixed: Application detection didn't work with HTTP Header "Content-Type"
- Fixed: Invalid certificate was created by HTTPS filtering
更新時間:2019-12-27
更新細節:
What's new in this version:
Animated Wallpaper Maker 4.4.22
- Option to write 3D text along a circle line has been added
- Loop transition option has been added to MP4 export
- Point particle emitter has been replaced with Radial Flow emitter
- Bug with sector area in particle emitter has been fixed
- Crash on exporting 4K videos with loop transition option has been fixed
- Bug with particle brush in No background mode has been fixed
- Bug with some executable files has been fixed
- Crash on the using particle presets has been fixed
- Crash on waterfall object has been fixed
Animated Wallpaper Maker 4.4.21
- DP animation Maker will now save export settings
- Phase option has been added to Turn, Fold, Zoom and Stretch brushes
- Windlike motion type has been added to Turn, Fold, Zoom, Stretch, Bend and Drift brushes
- Rectangle and Sector particle emitters has been joined in Liner Flow emitter
- Crash on switching particle template has been fixed
- Behavior of the MP4 incorrect parameters warning has been fixed
- Occasional erasing brush masks has been fixed
- Occasional malfunction of the view window has been fixed
Animated Wallpaper Maker 4.4.20
- New Splashes animation has been added
- New Field emitter has been added to Particle System Constructor
- Center property for particle image has been added
更新時間:2019-12-27
更新細節: