WinRAR (32-bit) 歷史版本列表
更新時間：2018-04-12
更新細節：
What's new in this version:
- Fixed per monitor brightness saving
- Update translation
- Fixed bip sounds
更新時間：2018-04-01
更新細節：
What's new in this version:
- "Extra large buttons" option in "Settings/General" selects 64x48 toolbar buttons
- "Restart" option is added to "Advanced/When done" list in archiving dialog
- -ioff4 switch can be used to restart PC after completing archiving or extraction
- Since it may take a lot of time to display contents of large tar.bz2 and tar.gz files, WinRAR displays the percent complete in the status bar while opening such archives
Bugs fixed:
- previous beta did not restore the toolbar layout changed by user
更新時間：2018-03-12
更新細節：
What's new in this version:
We updated WinRAR graphics:
- We are grateful to http://weirdsgn.com and http://icondesignlab.com designers participated in this endeavor and proud to announce that WinRAR uses the new icon set prepared by Aditya Nugraha Putra from http://weirdsgn.com
- "Repair" command efficiency is improved for recovery record protected RAR5 archives. Now it can detect deletions and insertions of unlimited size also as shuffled data including data taken from several recovery record protected archives and merged into a single file in arbitrary order
- "Turn PC off when done" archiving option is changed to "When done" drop down list, so you can turn off, hibernate or sleep your PC after completing archiving
- Use -ioff or -ioff1 command line switch to turn PC off, ioff2 to hibernate and -ioff3 to sleep your PC after completing an operation
- If encoding of comment file specified in -z<file> switch is not defined with -sc switch, RAR attempts to detect UTF-8, UTF-16LE and UTF-16BE encodings based on the byte order mask and data validity tests
- WinRAR attempts to detect ANSI, OEM and UTF-8 encodings of ZIP archive comments automatically
- "Internal viewer/Use DOS encoding" option in "Settings/Viewer" is replaced with "Internal viewer/Autodetect encoding". If "Autodetect encoding" is enabled, the internal viewer attempts to detect ANSI (Windows), OEM (DOS), UTF-8 and UTF-16 encodings
- Normally Windows Explorer context menu contains only extraction commands if single archive has been right clicked. You can override this by specifying one or more space separated masks in "Always display archiving items for" option in Settings/Integration/Context menu items", so archiving commands are always displayed for these file types even if file was recognized as archive. If you wish both archiving and extraction commands present for all archives, place "*" here
- SFX module "SetupCode" command accepts an optional integer parameter allowing to control mapping of setup program and SFX own error codes. It is also accessible as "Exit code adjustment" option in "Advanced SFX options/Setup" dialog
- New "Show more information" WinRAR command line -im switch. It can be used with "t" command to issue a message also in case of successful archive test result. Without this switch "t" command completes silently if no errors are found. This switch is applicable only to WinRAR.exe and ignored by console RAR.exe
- If a wrong password is entered when unpacking an encrypted file in ZIP archive, WinRAR proposes to enter a valid password for same file again instead of aborting extraction
- If a wrong password is entered when opening or unpacking RAR archive with encrypted file names, WinRAR proposes to enter a valid password again instead of aborting the operation. Previous versions already did so for RAR archives with encrypted file data, but aborted for archives with file name encryption
- WinRAR recognizes GZIP files with arbitrary data preceding an actual GZIP archive, such as .scexe firmware files
- @filelist parameter can be specified in "Files to add" field of archiving dialog. In this case WinRAR will attempt the list of archiving files from 'filelist' file, which should be the plain text, one file name per line
- Info dialog: compression ratio graph is updated
- Info dialog: "Names and data" is displayed in "Encryption" field for archives with encrypted file names
- Full archive name is displayed if mouse pointer is placed over an archive name in the operation progress window. It can be useful if archive name is lengthy and does not fit to available window space
- If -ts1 switch is used with -u or -f, file time comparison is performed with 1 second precision. Previosuly in such case we could wrongly treat an adding file as newer than archived just because we compared the high precision adding file time against the low precision archived file time
- "Update" and "Fresh" commands ('u' and 'f' in the command line mode) quit immediately if no files are to be updated. Previously they created a temporary archive before quitting when updating archives with recovery record or quick open information
- Prompt is issued after creating 500 volumes from WinRAR GUI shell, so user can continue or quit further archiving. It is done to prevent creating many thousands of volumes in case of wrongly entered volume size
- WinRAR uses megabytes instead of bytes as default units for volume size field in the archiving dialog
- "Repair" command issues "Recovery record is corrupt" message after repairing RAR5 archive containing a broken recovery record. Previously such message was issued only by "Test" command and "Repair" handled most of recovery record damages silently
Bugs fixed:
fixed potential security issues when processing corrupt RAR archives
non-English characters in TAR files with PAX extended headers were not displayed correctly
"rar x arcname.rar .." command unpacked files to current folder instead of its parent
pasting files from Windows Explorer to archive opened in WinRAR blocked further copy and paste operations in Explorer until archiving was finished
SFX module issued "The specified password is incorrect" message infinitely not prompting for correct password once a wrong password was entered
folders time was always set when extracting ZIP archives even if "File time" options in the extraction dialog were turned off
if "Delete mode: Always" was selected when extracting and user pressed "Cancel" in the file overwrite or password prompt, an archive could be deleted even after cancelling extraction for .zip and .7z formats
更新時間：2017-08-18
更新細節：
What's new in this version:
- WinRAR and command line RAR use RAR 5.0 archive format by default. You can change it to RAR 4.x compatible format with "RAR4" option in archiving dialog or -ma4 command line switch. If you prefer RAR 4.x format by default, use "Create default..." button on "Compression" page of WinRAR settings and set "RAR4" in the displayed dialog. This change affects only new clean installs. If you already saved RAR format in the default compression profile in previous versions, WinRAR respects stored settings
- Use "Set master password" button in "Organize passwords" dialog to encrypt saved password records and protect them from unauthorized access. If saved passwords are protected with master password, you need to enter the master password and press "OK" in password prompt to access them. If entered password does not match the master password, it is treated as a usual password for archive operations. Once entered, the master password is valid until WinRAR is closed. Close WinRAR and open it again after specifying the master password if you wish to see how protection works. Enter a valid and then empty master password to remove encryption from previously protected password records. This WinRAR version uses a new data format for password organizer, so passwords stored in "Organize passwords" dialog are not readable by older versions. It does not affect archive encryption formats and encrypted archives are compatible with previous WinRAR version. Organizer data is converted to a new format only when you save it and not immediately after installing WinRAR
- Prompt proposing to set the master password is displayed when storing a password in compression profile. You can enter the master password to encrypt password data stored in Registry and protect it from unauthorized access. You will need to enter the master password in password prompt dialog to access such compression profile after that. Once entered, the master password is valid until WinRAR is closed. Close WinRAR and open it again after specifying the master password if you wish to see how protection works
- By default, WinRAR uses AES-256 in CTR mode to encrypt ZIP archives. While AES-256 is significantly more secure than ZIP 2.0 legacy encryption algorithm, it can be incompatible with some older unzip software. If compatibility with such tools is required, you can enable "ZIP legacy encryption" option in the password dialog or use -mezl switch in the command line mode
- Added extraction support for .LZ archives created by Lzip compressor
- Modern TAR tools can store high precision file times, lengthy file names and large file sizes in special PAX extended headers inside of TAR archive. Now WinRAR supports such PAX headers and uses them when extracting TAR archives
- New "Store modification time" option on "Time" page of archiving dialog can be used to prohibit storing the file modification time in RAR 5.x archives. Former "High precision modification time" option is replaced by "High precision time format"
- New "Full paths in title bar" option in "Settings/General" dialog. If enabled, the full path of currently opened folder or archive is displayed in WinRAR title bar
- New "File types to open as archives first" option in "Settings/Compression". Here you can define how Enter or double click on a file with non-archive extension and archive contents should be processed in WinRAR file list in file management mode. Examples of such files are .docx or self-extracting exe archives. You can instruct WinRAR either to open such files as archives first or to execute or open them in associated programs. Default settings are to open self-extracting exe and to run other types of archives with non-archive extension. Regardless of these options, you can always open any such archive file by pressing Ctrl+PgDn on its name in WinRAR file list. Default folders for archives and extracted files are moved from "Settings/Compression" to "Settings/Paths"
- New "Copy full names to clipboard" command in "File" menu places full names of selected files to clipboard
Changes in the context menu displayed when right clicking the file list in WinRAR:
- several commands, which are also present on the toolbar or in main menu, such as "View" and "Repair", are removed from this context menu
- "Copy full names to clipboard" command is added
- "Run" for executables, "Open in associated application" for associated files and "Show archive contents" for archives are added. They allow to choose a way to process SFX archives and archive files with non-archive extensions. These items are present only in the file management mode and are not available inside of archives
- LZ and ZIPX are added to list of associations in Settings/Integration dialog
- LZ and ZIPX extensions are added to default list of formats for ms switch ("Specify file types to store") invoked without parameters
- You can specify 'f' charset value in -sc switch to use UTF-8 encoding. For example: rar a -scfl arcname @filelist.txt to read contents of filelist.txt as UTF-8 text
- RAR "lt" and "vt" commands display file times with nanosecond precision. Such precision is used in RAR5 archives created by RAR/Unix 5.50 and newer. Archives created by WinRAR have 100ns file time precision
- Only '+', '-' and '1' precision modifiers are supported in -ts switch now. Use '+' to store the file time with maximum precision, '-' to omit the file time and '1' to store it with 1 second precision. Intermediate precision modes previously defined with '2' and '3' modifiers are not available in RAR 5.0 archive format and ignored by -ts switch
- If a wrong password is entered when unpacking an encrypted file in RAR5 archive, WinRAR proposes to enter a valid password for same file again instead of aborting extraction
- File path information is displayed if mouse pointer is placed over a name of archiving file in the operation progress window
- Name of currently active compression profile is displayed in the archiving dialog above "Profiles..." button
- If "Find" command is invoked from inside of archive subfolder, "File names to find" will include the path to this subfolder. So "Find" will search only starting from this subfolder
Bugs fixed:
- fixed crashes and security vulnerability when unpacking corrupt RAR archives
- WinRAR failed to unpack files in ZIP archives compressed with XZ algorithm and encrypted with AES
- if "Windows progress bars" option in WinRAR settings was turned off and "Put each file to separate archive" archiving mode was used, "gold" part of total progress bar did not display the compressed data ratio correctly
- SFX archive extraction progress was incorrect in case of multivolume SFX archive with total volume size exceeding 4 GB
- if archived folder name included trailing spaces, if user selected and extracted some folders in non-root archive folder and if "Allow potentially incompatible names" extraction option was turned off, WinRAR could lose one or more leading characters in extracted folder name
- if only creation or only last access file time was stored in RAR5 archive with 1 second precision, such as with -ma5 -tsm- -tsa1 switches, this stored time was ignored when extracting
更新時間：2017-07-25
更新細節：
What's new in this version:
- File association option for JAR files is off by default in WinRAR installer unless you enabled it earlier in previous WinRAR versions. You need to enable this option manually if you wish to associate WinRAR with *.jar.
Unless "Allow absolute paths in symbolic links" extraction dialog option or -ola command line switch are specified, WinRAR does not allow to extract symbolic links with ".." in target if any of link path components is an existing symbolic link itself. It is done to prevent bypassing WinRAR security checks with chains from several symbolic links.
Bugs fixed:
- if "Add" command was used from inside of archive opened in WinRAR interface, "file not found" error could be issued for files which pathnames included spaces
- fixed crashes when unpacking corrupt RAR archives
- "rar a arc. filename" command created "arc." archive with trailing dot instead of expected "arc" without any extension
- "New folder" button in extraction dialog selected a parent of newly created folder instead of such folder itself
- "Checksum error" could be mistakenly reported for some valid GZIP archives
更新時間：2017-07-02
更新細節：
What's new in this version:
- If it takes too much time to locate a destination path in extraction dialog folder tree, automatic search performed as user enters the path is cancelled. Lengthy search in large folders could interfere with user input in this dialog. You can still force WinRAR to select the entered destination path in extraction dialog with "Display" button.
- The keyboard focus was not returned to "Settings/File list" dialog page after selecting the file list font.
更新時間：2017-06-16
更新細節：
What's new in this version:
- Fixed a crash and security vulnerability when unpacking corrupt RAR4 archives
- "Extract to a specified folder" command was missing in context menu in WinRAR file list when right clicking an archive
更新時間：2017-05-23
更新細節：
What's new in this version:
- Added support for Unix extended timestamp extra field (0x5455 extra field tag) in ZIP archives. Such timestamps are used by InfoZip to store UTC file time additionally to standard ZIP local time. Now WinRAR reads and sets such timestamps when extracting
- "Run", "Open in associated application", "Show archive contents" items are added to right click menu in WinRAR file list. So you can right click SFX archive or archive file with non-archive extension like .docx and choose if you wish to browse its contents, to run or open it
- These items are present only in the file management mode and are not available inside of archives
- "File types to open as archives first" option is moved from "Settings/Archives" to "Settings/Compression". Now it works only outside of archives to avoid conflicts with "Settings/Viewer/ Unpack everything for" option
- Default folders for archives and extracted files are moved from "Settings/Compression" to "Settings/Paths" dialog page
- Bugs fixed: some files in TAR archives could be unpacked with full paths even if "Extract relative paths" option was enabled
更新時間：2017-05-06
更新細節：
What's new in this version:
- Previous versions ignored files with invalid UTF-8 names inside of ZIP archives. Now WinRAR extracts such files, even though their names may include arbitrary text after unpacking.
Bug fixed:
5.50 beta 1 could crash when extracting some of broken RAR4 archives;
- "Settings/Viewer/Unpack everything for" was ignored for files matching "Settings/Archives/File types to open as archives first" masks. Now it is changed, so "Unpack everything for" has a higher precedence for archived files. Files inside of archive matching
- "Unpack everything for" masks are processed according to that option even if they are also matched by "File types to open as archives first" masks
更新時間：2017-04-13
更新細節：
What's new in this version:
- WinRAR and command line RAR use RAR 5.0 archive format by default. You can change it to RAR 4.x compatible format with "RAR4" option in archiving dialog or -ma4 command line switch.
- If you prefer RAR 4.x format by default, use "Create default..." button on "Compression" page of WinRAR settings and set "RAR4" in the displayed dialog.
- Use "Set master password" button in "Organize passwords" dialog to encrypt saved password records and protect them from unauthorized access. If saved passwords are protected with master password, you need to enter the master password and press "OK" in password prompt to access them. If entered password does not match the master password, it is treated as a usual password for archive operations. Once entered, the master password is valid until WinRAR is closed.Close WinRAR and open it again after specifying the master password if you wish to see how protection worksEnter a valid and then empty master password to remove encryption from previously protected password records. This WinRAR version uses a new data format for password organizer, so passwords stored in "Organize passwords" dialog are not readable by older versionsIt does not affect archive encryption formats and encrypted archives are compatible with previous WinRAR version. Organizer data is converted to a new format only when you save it and not immediately after installing WinRAR
- Prompt proposing to set the master password is displayed when storing a password in compression profileYou can enter the master password to encrypt password data stored in Registry and protect it from unauthorized access. You will need to enter the master password in password prompt dialog to access such compression profile after that. Once entered, the master password is valid until WinRAR is closed. Close WinRAR and open it again after specifying the master password if you wish to see how protection works
- By default, WinRAR uses AES-256 in CTR mode to encrypt ZIP archives. While AES-256 is significantly more secure than ZIP 2.0 legacy encryption algorithm, it can be incompatible with some older unzip softwareIf compatibility with such tools is required, you can enable "ZIP legacy encryption" option in the password dialog or use -mezl switch in the command line mode
- Added extraction support for .LZ archives created by Lzip compressor.
- Modern TAR tools can store high precision file times, lengthy file names and large file sizes in special PAX extended headers inside of TAR archiveNow WinRAR supports such PAX headers and uses them when extracting TAR archives.
- New "Store modification time" option on "Time" page of archiving dialog can be used to prohibit storing the file modification time in RAR 5.x archives. Former "High precision modification time" option is replaced by "High precision time format".
- New "Full paths in title bar" option in "Settings/General" dialog. If enabled, the full path of currently opened folder or archive is displayed in WinRAR title bar.
- New "Settings/Archives" page provides "File types to open as archives first" group of optionsHere you can define how Enter or double click on a file with non-archive extension and archive contents should be processed in WinRAR file list. Examples of such files are .docx or self-extracting .exe archives. You can instruct WinRAR to open such files as archives, to run them, to handle them similarly or differently inside and outside of archives, to never run specified file types even if they do not include any archived contents. Default settings are to open self-extracting exe and to run other types of archives with non-archive extension.Regardless of these options, you can always open any such archive file by pressing Ctrl+PgDn on its name in WinRAR file list.
- New "Copy full names to clipboard" command in "File" menu places full names of selected files to clipboard.This command is also added to context menu displayed when right clicking the file list in WinRARSeveral other commands, which are also present on the toolbar or in main menu, such as "View" and "Repair", are removed from this context menu
- LZ and ZIPX are added to list of associations in Settings/Integration dialog
- LZ and ZIPX extensions are added to default list of formats for ms switch ("Specify file types to store") invoked without parameters. You can specify 'f' charset value in -sc switch to use UTF-8 encoding. For example: rar a -scfl arcname @filelist.txt to read contents of filelist.txt as UTF-8 text
- RAR "lt" and "vt" commands display file times with nanosecond precision.Such precision is used in RAR5 archives created by RAR/Unix 5.50 and newer. Archives created by WinRAR have 100ns file time precision.
- Only '+', '-' and '1' precision modifiers are supported in -ts switch nowUse '+' to store the file time with maximum precision, '-' to omit the file time and '1' to store it with second precision.Intermediate precision modes previously defined with '2' and '3' modifiers are not available in RAR 5.0 archive format and ignored by -ts switch
- If a wrong password is entered when unpacking an encrypted file in RAR5 archive, WinRAR proposes to enter a valid password for same file again instead of aborting extraction
- File path information is displayed if mouse pointer is placed over a name of archiving file in the operation progress window
- Name of currently active compression profile is displayed in the archiving dialog above "Profiles..." button
- If "Find" command is invoked from inside of archive subfolder, "File names to find" will include the path to this subfolder. So "Find" will search only starting from this subfolder
Bugs fixed:
- WinRAR failed to unpack files in ZIP archives compressed with XZ algorithm and encrypted with AES;
- if "Windows progress bars" option in WinRAR settings was turned off and "Put each file to separate archive" archiving mode was used, "gold" part of total progress bar did not display the compressed data ratio correctly;
- SFX archive extraction progress was incorrect in case of multivolume SFX archive with total volume size exceeding 4 GB;
- if archived folder name included trailing spaces, if user selected and extracted some folders in non-root archive folder and if "Allow potentially incompatible names" extraction option was turned off, WinRAR could lose one or more leading characters in extracted folder name;
- if only creation or only last access file time was stored in RAR5 archive with 1 second precision, such as with -ma5 -tsm- -tsa1 switches, this stored time was ignored when extracting.