VueScan (64-bit) 歷史版本列表
更新時間：2020-01-03
更新細節：
What's new in this version:
- added support for m3u lists (SAT>IP, VLC, WinAmp, ...)
- added support for Hisense H50B7700UW (and maybe others which use the same favorite list table schema)
- fixed support for Philips lists with format 100
- fixed missing DLLs with spanish translation
- fixed polarity display for Samsung (caused by a stale .ini file in the package)
- disabled "Lock" toggle button when the list does not support parental locks
更新時間：2020-01-02
更新細節：
更新時間：2020-01-02
更新細節：
What's new in this version:
Rocrail 02-01-2020 (64-bit)
- Change log not available for this version
Rocrail 30-12-2019 (64-bit)
- Change log not available for this version
Rocrail 29-12-2019 (64-bit)
- Change log not available for this version
Rocrail 28-12-2019 (64-bit)
- Change log not available for this version
Rocrail 27-12-2019 (64-bit)
- Change log not available for this version
Rocrail 25-12-2019 (64-bit)
- Change log not available for this version
Rocrail 22-12-2019 (64-bit)
- Change log not available for this version
Rocrail 20-12-2019 (64-bit)
- Change log not available for this version
Rocrail 17-12-2019 (64-bit)
- Change log not available for this version
Rocrail 16-12-2019 (64-bit)
- Change log not available for this version
Rocrail 15-12-2019 (64-bit)
- Change log not available for this version
Rocrail 13-12-2019 (64-bit)
- Guiapp: fixes for merge node recursive and replace childs
Rocrail 11-12-2019 (64-bit)
- Change log not available for this version
Rocrail 09-12-2019 (64-bit)
- Change log not available for this version
Rocrail 08-12-2019 (64-bit)
- Change log not available for this version
Rocrail 07-12-2019 (64-bit)
- Change log not available for this version
Rocrail 05-12-2019 (64-bit)
- Xmlscript: trace correction
- Lightctrl: fix for turning lights off
Rocrail 04-12-2019 (64-bit)
- Block: fix for none recursive modify
Rocrail 03-12-2019 (64-bit)
- Modplan: fix for setting the z on addModule to prevent double levels
- Xmlscriptdlg: crash fix in case no lclist is available
- Wio: steerwheel angle added to the dirv command
- Wio: allow 250 speed steps
Rocrail 02-12-2019 (64-bit)
- block,loc: rear protection corrections
- wio: loco dirv mass parameter added for mobile
- block: check also for V=0 in case the enter trigger was resetted in case of rear protection
- modplan: fix for saving modules in case of deletions
Rocrail 01-12-2019 (64-bit)
- wiodlg: mobile type added
Rocrail 30-11-2019 (64-bit)
- Change log not available for this version
Rocrail 29-11-2019 (64-bit)
- Rocnetnode: set channels flags to make sure the servo goes in sleep mode after changing settings.
- Wio: filter out the 100 degree value
Rocrail 28-11-2019 (64-bit)
- Wiodlg: battery column without percent sign
- Wio: query with environment
- Finder: new option added to skip manual routes
- Guiframe: fix for assert loco grid select row if none exist
- Guiframe: fix for assert loco grid select row -1
- Guiframe: assert fix for select loco grid row -1
Rocrail 27-11-2019 (64-bit)
- Wiodlg: added include for standard integers
- Rocrailinidialog: show/edit rocweb image path
- Rocweb: html file type support added
Rocrail 26-11-2019 (64-bit)
- Wio: sensor pressure added
Rocrail 25-11-2019 (64-bit)
- Wio: temp100 support added
- Wio: use temperature from alive events
Rocrail 24-11-2019 (64-bit)
- Change log not available for this version
Rocrail 20-11-2019 (64-bit)
- Block: reset signals on exit option added
- Blockdialog: reset signals on exit
- Roclcdr: fix for checkinf shortin and inatpre2in
- Last time removal of dtc
- Z21: not trace unknown packets
Rocrail 19-11-2019 (64-bit)
- Change log not available for this version
Rocrail 18-11-2019 (64-bit)
- Loc: use modified direction on consist dispatch
- Wio: fix for old compiler
- Blockdialog: remove scale
- Block: use plan scale for mvtrack
Rocrail 15-11-2019 (64-bit)
- Change log not available for this version
Rocrail 14-11-2019 (64-bit)
- switch: ctc WIO blink LED support in case of pending
Rocrail 13-11-2019 (64-bit)
- Change log not available for this version
Rocrail 11-11-2019 (64-bit)
- Change log not available for this version
Rocrail 07-11-2019 (64-bit)
- Rocrailinidialog: wio options
- Rocrailinidlg: WIO options added
- Wio: watchdog timeout option
- Wio: show add to list trace at monitor level
- Makewin.sh: use bash instead of sh
- Wiodlg: layout correction
- Makewin.sh: added the zipper command
- Makewin.sh: simplified windows make script
- Cleanup
- Guiframe: report remark in case generic signal addresses
- Guiframe: report location split up in separate columns
- Version correction for rocs and lcdriver
- Report: show gate, description and decoder
- Signal: attribute rename addr -> addr1
- Wiodlg: fix for showing type LED on the index tab
- Guiframe: exclude the car list in case of accessory reporting
- Rocview: report action added
- Wio: trace correction for alive timeout
- Wio: POM cv number correction
- Trackdialog: show selected track on the plan panel
- Wio: binstate added
- Roads theme: fix for the twoway switch (Wolfgang)
- Wio: trace correction
- Loc: protect loco properties on field events
- Roads theme: more symbols (Wolfgang)
- Powerman: check if it is a booster event before generating a booster object
- Rocrailinidialog: generate booster option added
- Generate booster option in dialog
- Powerman: option for generating new boosters
Rocrail 06-11-2019 (64-bit)
- Makewin.sh: simplified windows make script
- Guiframe: report remark in case generic signal addresses
- Guiframe: report location split up in separate columns
Rocrail 03-11-2019 (64-bit)
- Change log not available for this version
Rocrail 31-10-2019 (64-bit)
- Change log not available for this version
Rocrail 23-10-2019 (64-bit)
- Wio: short circuit event added
- Wio: signal LED type support added bus:addr aspect
- Wio: remove ebreak from 127 speed steps
- Wio: fix for calculating decoder speed
- Wio: POM
- Wio: POM added
- Loc: swapondirchange reverted to revision 53
- Gotodlg: support for double click
- Wio: send speed steps
- Mvtrack: mvtrainlen var added, regard metrics for trainlen
- Switchdialog: translation typo fix
- Oc: swapondir at commands
- Wio: bus added to dcc loco commands
- Wio: mobile function support
- Switch/outputdlg: fix for channeltune dialog values
- Wiodlg: fix for I/O next/prev
- Mttmfcc: support for new bidi sensor module
- Loc: allow swap on dir change, but no support for multi head
- Wio: trace info at monitor level
Rocrail 16-10-2019 (64-bit)
- Text: convert display text from utf8 into iso latin
Rocrail 13-10-2019 (64-bit)
- Wio: send brighness with clock event
- Loc: fix for checking consist member
- Mvtrack: fix for save the calctrainlen option
- Wio: clock sync added
- Wio: text message type added
- Loc: fix for field direction
Rocrail 09-10-2019 (64-bit)
- Change log not available for this version
Rocrail 06-10-2019 (64-bit)
- Change log not available for this version
Rocrail 03-10-2019 (64-bit)
- Fine tune dialog for servo outputs and switches
- Wio: servo support
Rocrail 01-10-2019 (64-bit)
- Change log not available for this version
Rocrail 29-09-2019 (64-bit)
- Change log not available for this version
Rocrail 22-09-2019 (64-bit)
- Change log not available for this version
Rocrail 15954 (64-bit)
- Wio: sensor response added
- Clntcon,wio: fix for double wio broadcasts
- Wio: switch and output commands and events added
Rocrail 15949 (64-bit)
- Change log not available for this version
Rocrail 15943 (64-bit)
- mjpg: disable popups in case the data received is corrupt
- mjpg: crash fix
- mjpg: compile fix
- mjpg: wip for udp
- hue: fix for buffer overflow
- hue: free memory fix
Rocrail 15936 (64-bit)
- roco cam protocol
Rocrail 15935 (64-bit)
- Change log not available for this version
Rocrail 15931 (64-bit)
- rocdigs: makefile clear rascii dir
- demon plan: text pointsize correction
Rocrail 15928 (64-bit)
- infodialog: revert smalles font size for disclaimer
- infodialog: smaller font size for disclaimer
- infodialog: show system language
- infodialog: show wx system language code
- translation merge: de, cs, sl, fr, sr_latin, nl
- newfeatures update
- guiapp: added english variants for selecting language
- rocview: select language if none is set in the rocview.ini
- guiframe: try to get user language code
Rocrail 15916 (64-bit)
- Change log not available for this version
Rocrail 15905 (64-bit)
- Planpanel: fix for moving to other level
- Dccpp: fix for tcp port
Rocrail 15898 (64-bit)
- Change log not available for this version
Rocrail 15893 (64-bit)
- Rascii: signal type led support added
- Signal brightness added for LED signals
- Loc: regard gomanual on swap
- Rascii: set cts if wanted
- Loc: swap placing on direction change in half auto ode manual run
- Renderer: regard loco direction in case of flipping image
- Loc: evaluate field direction with current loco direction for optional swap block enter side
- Schedule: ignore automatic swap in case the loco runs in half automatic
- Schedule: ignore automatic swap in case the loco runs in half automatic mode
Rocrail 15884 (64-bit)
- Decoder: play sound async
- Decoder: play sound
- Loc: added state event
- Decoder.py: sample interpreter
Rocrail 15877 (64-bit)
- Ledbutton: memory leak fix
- Translation change for swapondir
- Mjpg,item: init text object on the fly
- Loc: swapondir option added
Rocrail 15869 (64-bit)
- Item,renderer: moved the MJPG from renderer to item
- 1oc: swap block enter side on direction change in case of manual or halb automatic mode
- Rascii: output color support added
Rocrail 15864 (64-bit)
- mjpg: use mutex to access and update the jpg image to show
Rocrail 15860 (64-bit)
- Ahome: http support
- Ahome: support for simple http outputs
- Ahome: support for simple http outputs added
Rocrail 15857 (64-bit)
- Block: save closed state
- Route: check for runable the tt and seltab too
- Renderer: destructor to clean up the MJPG class
- Throttledlg: use size event to rescale
- Throttledlg: revert to bitmap button
Rocrail 15850 (64-bit)
- Change log not available for this version
Rocrail 15840 (64-bit)
- Zipper: rocctrl.py added
- Zipper: canservice added
- Modplan: remove the deleted module also from the list to prevent saving it as empty plan
- Installwx: use the libwxgtk3.0-dev package
- Zipper; stylesheets added
- Throttle: set static bitmap background color to gray
Rocrail 15834 (64-bit)
- Control: fix for dependencies
- Mjpg,renderer: size fix for text
- Layout parent sizer after first bitmap update
- Rascii: 16 bit for CV get/set
- Throttledlg: locoimage mouse event handler added for selecting a loco
- Mjpg: fixes for text object
Rocrail 15824 (64-bit)
- Webview for macOS only until linux and windows do have fitting libraries
- Infodialog,renderer: webview also for linux
- Control: removed dependency webview
- Throttledlg: test wxWebView under Linux
- Dependency update for webview
- Video streaming in text and throttle
- Fback: regtrigger added
- Ahome: json power events
- Infodialog: disable webview includes in case of none apple
- Fback: format variable text
Rocrail 15816 (64-bit)
- Infodialog: disable webview includes in case of none apple
- Fback: format variable text
- Fback: format variable text in case the original value was a float
- Infodialog: commented out the webview
- Infodialog: check if a web kit is available
- Infodialog: webview is not included in the linux wxWidgets
- Infodialog: wiki tab added
- Action,model,xmlscript: use the var pubish function to broadcast changes
- Fback,var: publish register variables
Rocrail 15807 (64-bit)
- Fback: trace correction for regval
- Loc: check shunting state
- Powerctrldlg: remove minimal height of graphic
- Output: variable support in commands on/off
- Dumper: output support added
- Fback: array added for register value types
- Sbus: wip
- Hue: lux to brightness calculation
- Rocview: revert translation from class to group
Rocrail 15792 (64-bit)
- Change log not available for this version
Rocrail 15742 (64-bit)
- fcc: write accessory cv
Rocrail 15734 (64-bit)
- Change log not available for this version
Rocrail 15671 (64-bit)
- Desktoplink.sh: comment added
- Loc: trigger corrections for virtual timers
- Desktoplink.sh added for linux ZIP
- Zipper: create packege/history if needed
- Rocrail png icon added
Rocrail 15662 (64-bit)
- Change log not available for this version
Rocrail 15640 (64-bit)
- Removed wiringPI library
- Rocnetnode: added /dev/ttyAMA0 selection for dcc232
- Mbus: trace correction
- Dcc232: revert gpio
- Dcc232: WIP
- Dcc232: gpio WIP
- Dcc232: gpio WIP
- Dccd232: gpio WIP
- Analyse: fix for zoffset (Lothar)
Rocrail 15615 (64-bit)
- Zipper.sh: typo
- Zipper: linux support added
- Rocview.cmd: use absolute path for server binaries
- Zipper.sh: copy zip to package
- Zipper: $1 for w32/w64
- Zipper script added
- Rocview.cmd for zip installer
- Model: remove attribute modplan
- Text: replace pipe with
in case of html and concat
Rocrail 15608 (64-bit)
- Change log not available for this version
Rocrail 15604 (64-bit)
- switch: test trace twin address
Rocrail 15602 (64-bit)
- Change log not available for this version
Rocrail 15594 (64-bit)
- Change log not available for this version
Rocrail 15585 (64-bit)
- Infodialog: removed obsolete adjustminsize flag
- Donkeydlg: layout corrections
- Wsocket: trace correction in case the hostname query did fail
- Infodialog,rocguiinidlg: layout and translation corrections
- Donkey: added missing dialog title
Rocrail 15574 (64-bit)
- Control: tracelevel correction for action state does not match
- Rocweb: added text click command
Rocrail 15570 (64-bit)
- Canservice: report as CANID=0 and NN=0
- Text: fix for model command change
- Canservice: use same CANID and nodenumber as the GC1e in case of service on 5550
- Modplan: add all system actions
- Text: center option added
Rocrail 15558 (64-bit)
- text: fix for check action state
Rocrail 15554 (64-bit)
- Control: trace correction
- Mbus utils: fix for MERG standard CAN frame ID
- Canservice: avoid looping without sleep in case of tcp socket error
- Canservice: fix for standard ASCII frame
- Canservice: ascii framing support added
- Xmlscriptdlg: text commands added
- Text: click state for triggering actions added
- Modplan: read/save tour, waybill, link, weather, lightctrl and mvtrack
- Modplan: read and save module systemactions
- Modplan: read module system
Rocrail 15544 (64-bit)
- modplan: use modzoffset on modify; move, rotate
Rocrail 15543 (64-bit)
- Change log not available for this version
Rocrail 15533 (64-bit)
- Block: fix for action call for occupied
- Modplandlg: file dialog buttons added for loco and route xml
Rocrail 15531 (64-bit)
- Wrapper: default 3 trace files
Rocrail 15530 (64-bit)
- Location: fix for maxocc zero
- Route,switch: check if the switch has an address set on empty commands
- Switch: check for valid command
- Locationsdlg: layout correction
- Locationsdlg: layout correction
Rocrail 15525 (64-bit)
- mbus: support for UID in system commands and events
Rocrail 15518 (64-bit)
- Mbus: reject fnchanged -1
- Ocation: maxocc per cargo type
- Location: max commuter option added
Rocrail 15515 (64-bit)
- Schedules: reset callerid and callertype
Rocrail 15515 (64-bit)
- Control: set the IID in the callerid variable
- Check4redsignals option added, default off
- Wmz21: ignore bidikmh
- Mbus: send lights(f0) also after the speed/dir commands
Rocrail 15510 (64-bit)
- Win64 build: strip debug info
Rocrail 15506 (64-bit)
- System actions: sub state implemented for IID
Rocrail 15505 (64-bit)
- Location: disregard maxocc if the loco already did arrive
- Set UID to 21 if zero to be compatible with previous revisions
- Locationdlg: removed deprecated adjust flag
- Set uid on state report
Rocrail 15504 (64-bit)
- Change log not available for this version
Rocrail 15503 (64-bit)
- Change log not available for this version
Rocrail 15500 (64-bit)
- Trace: fix for empty trace file name
- Z21: uid field added
- Clntcon: fix for ping and reply with pong
- Rcon: reactivate the 5s idle ping
- Mqtt-cs: serial connect added
- Clntcon/rcon: set keepalive socket option
Rocrail 15498 (64-bit)
- Change log not available for this version
Rocrail 15494 (64-bit)
- Planpanel: save scroll position
- Mqtt-cs python example extended with XML parsing
Rocrail 15492 (64-bit)
- Item/guiframe: restore throttle position and size dependent from loco ID
- Rocview makefile: fix for wxsubincl 3.0 -> 3.1
Rocrail 15486 (64-bit)
- Signal: white address as bit pattern if port is zero
- Rocwebworker: support for https
- Rocwebworker: support for https
- Tracedlg: fix for close event (X)
Rocrail 15482 (64-bit)
- Rocweb: http return code correction for plan and options xml
- Evaluate function event
- Function control type added
- Translation merge: fr
- Xmlscriptdlg: replaced settargetrange with the 3.0 start/end function
- Aboxdlg: layout fixes
- EStW: threeway symbol added
Rocrail 15475 (64-bit)
- Change log not available for this version
Rocrail 15470 (64-bit)
- Xmlscriptdlg: try to select the complete invalid line
- Xmlscriptdlg: select invalid XML line
- Xmlscriptdlg: select text from invalid XML
- Block: fix for service wait
- Output: function type added
Rocrail 15465 (64-bit)
- Block: revert put out of operation behaviour in case from dialog
- Xmlscriptdlg: find added
- Xmldlg: find added
Rocrail 15462 (64-bit)
- Model: trace level correction
- Block: crosscheck fix for service
- MBUS: not evaluating type in case of UID zero
- Cv index support for accelleration and calibrating
- Xmlscript: block throttle command added
- Locdialog: show CV index in grid
- Mbus,rocpro: mfx cv index support
- Block: fix for wait and service
- Block: check if occupied in case of modify and new state should be close
Rocrail 15453 (64-bit)
- Tt: set accessory bit in case of f6915
- Xmlpointsize default set to 11
- Manifest: removed dpiAwareness
- Xml: add wrap and pointsize attribute
更新時間：2020-01-02
更新細節：
What's new in this version:
VueScan 9.7.18 (64-bit)
- If 'Output | Auto file name' is off, always ask for file name
- Improved .rpm file for Red Hat Linux
VueScan 9.7.17 (64-bit)
Added support for new Canon scanners:
- iR1643
- MF440
- MF540
- MF641
- MF642
- MF643
- MF644
- MF645
- MF741
- MF742
- MF743
- MF744
- MF745
- MF746
- WG7140
- WG7150
- WG7240
- WG7250
- WG7440
- WG7450
- WG7540
- WG7550
- WG7740
- WG7750
- WG7840
- WG7850
- WG7940
- WG7950
VueScan 9.7.16 (64-bit)
- Fixed problems with some Genesys Logic scanners
- Canon 4400F (flatbed up to 600 dpi)
- Canon 8400F
- Canon 8600F
- Canon LiDE 50
- Canon LiDE 60
- Canon LiDE 80
- Canon LiDE 100
- Canon LiDE 110
- Canon LiDE 120
- Canon LiDE 200
- Canon LiDE 210
- Canon LiDE 220
- Plustek OpticFilm 7200i
- Plustek OpticFilm 7300
- Plustek OpticFilm 7500i
- HP ScanJet 2300c
- HP ScanJet 4850 (flatbed up to 400 dpi)
- Added support for Canon DR-850M
- Added support for in-scanner auto skew with some Epson scanners
- Fixed problem with some Brother document scanners
VueScan 9.7.15 (64-bit)
- Reduced size of JPEG files 10% (optimization of entropy coding)
- Reduced size of color text files (JPEG and PDF)
- Support batch scanning mix of 8.5x11, 8.5x14 and 8.5x17 media sizes
- Fixed problem with some newer and Reflecta scanners
VueScan 9.7.14 (64-bit)
- Fixed problem with plugging/unplugging USB scanners
- Fixed problem with 'Scanner | Find scanners' command
- Fixed problem with 'Input | Media size' set to 'Auto'
- Added support for Plustek OpticFilm 135i on Windows and Mac OS X
VueScan 9.7.13 (64-bit)
- Added support for inexpensive video film scanners on Mac OS X
- Fixed problem with some Avision scanners
- Added support for Plustek OpticBook 3800L
- Added support for document feeder on Fujitsu M4097
- Several small bug fixes
VueScan 9.7.12 (64-bit)
Added support for plugging/unplugging USB scanners while running:
- Recovers from computer sleeping and waking
Added 'Scanners | Find scanners' command:
- Searches local networks for WiFi and ethernet scanners
- Searches for attached Firewire and SCSI scanners
VueScan 9.7.11 (64-bit)
- Significantly improved scan speed of many Brother scanners
VueScan 9.7.10 (64-bit)
- Improved scan quality with older Fujitsu ScanSnap scanners: S500, S500M, S510, S510M, S1500
- Improved scan quality with older Fujitsu fi-series scanners
- Fixed problem with 'Color | Brightness' with document scanners
VueScan 9.7.09 (64-bit)
- Fixed problem with some Brother printer/scanner/copiers
- Fixed problem with some Epson document scanners
Improved scan quality with 6 Fujitsu ScanSnap scanners:
- S300
- S300M
- S1100
- S1100i
- S1300
- S1300i
VueScan 9.7.08 (64-bit)
- Added support for setting 'Input | Media size' to 'Custom'
- Added support for Brother MFC-J775DW
- Fixed problems with macOS 10.15 (Catalina)
- Fixed problem with Canon 4400F
- Fixed problem with Brother DCP-L2535DW
- Fixed problem with 'Input | Batch list' not appearing
- Fixed problem with 'Color | White point (%)'
VueScan 9.7.07 (64-bit)
- Faster scanning with some document scanners
- Fixed problem with some document scanners
- Fixed problem with 'Output | PDF multi page' set to 'Front/Back'
- Fixed problem with duplex scans with Samsung CLX-6260
- Reduced JPEG artifacts with some document scanners
- Faster startup when USB scanner being used by another program
VueScan 9.7.06 (64-bit)
New:
- Faster scanning with high-speed document scanners
- Solved problems with some Genesys Logic scanners
(Overlaps scanning with saving to disk):
- Fujitsu document scanners
- Canon DR-series document scanners
- Epson DS-series document scanners
- Newer HP document scanners
- Samsung document scanners
- Kyocera and other office document scanners
VueScan 9.7.05 (64-bit)
- Faster scanning with Genesys Logic scanners (remembers calibration)
- Preliminary support for transparency scans with Genesys Logic
VueScan 9.7.04 (64-bit)
- Fixed problem with some Genesys Logic scanners
- Added support for Brother MFC-L2685DW
VueScan 9.7.03 (64-bit)
Added support for 6 new Canon DR-series document scanners:
- DR-C230
- DR-C340
- DR-M260
- DR-G2090
- DR-G2110
- DR-G2140
VueScan 9.7.02 (64-bit)
- Improved support for sliders in B/W histogram
- Fixed problem with Fujitsu S500 and S500M
- Fixed problems with some Samsung scanners when awoken from sleep
- Fixed assorted small problems
VueScan 9.7.01 (64-bit)
Improved built-in drivers for some genesys logic scanners:
- Canon 8400F (no infrared yet)
- Canon 8600F (no infrared yet)
- Plustek OpticFilm 7200i (preliminary)
- Other OpticFilm scanners will be supported in the next months
VueScan 9.6.47 (64-bit)
- Improved support for loading .ini files from function keys
- (Files are assigned to function keys in alphabetical order)
- Fixed problem with crop box sometimes rotating unexpectedly
- Fixed problem with some AirPrint/Scan (eSCL) scanners
VueScan 9.6.46 (64-bit)
- Added support for Extended Edition
- Raw file name now also appears in Input tab
- Enabled all color space options in trial version
VueScan 9.6.45 (64-bit)
- Added support for 46 new Epson scanners: EC-4020, EC-4030, EC-4040, ES-60WB, ES-60WW, ET-2720, ET-2760, ET-3710, ET-3760, ET-4700, ET-4760, ET-M2140, ET-M2170, ET-M3140, ET-M3170, ET-M3180, L3100, L3160, L364, L382, L5190, L7160, L7180, PX-M270FT, PX-M270T, PX-M7110F, PX-M7110FP, PX-M880FX, PX-M885F, ST-2000, ST-3000, ST-4000, ST-M3000, WF-2810, WF-2830, WF-2850, WF-3730, WF-C579R, WF-C579RB, WF-C8610, WF-C8690B, WF-M20590, XP-2100, XP-4100, XP-6100, XP-7100
VueScan 9.6.44 (64-bit)
Added support for 34 new HP scanners:
- Color LaserJet Pro MFP M478fcdn
- Color LaserJet Pro MFP M478fcdw
- Color LaserJet Pro MFP M479dw
- Color LaserJet Pro MFP M479fcdn
- Color LaserJet Pro MFP M479fcdw
- Color LaserJet Pro MFP M479fdn
- Color LaserJet Pro MFP M479fdw
- Color LaserJet Pro MFP M479fnw
- Laser NS MFP 1005
- Laser NS MFP 1005w
- LaserJet Enterprise Flow MFP M528c
- LaserJet Enterprise Flow MFP M528z
- LaserJet Enterprise MFP M528dn
- LaserJet Enterprise MFP M528f
- LaserJet Managed Flow MFP E52645c
- LaserJet Managed MFP E52645dn
- LaserJet Pro MFP M329dn
- LaserJet Pro MFP M329dw
- LaserJet Pro MFP M428c1
- LaserJet Pro MFP M428c2
- LaserJet Pro MFP M428c3
- LaserJet Pro MFP M428c4
- LaserJet Pro MFP M428dw
- LaserJet Pro MFP M428fdn
- LaserJet Pro MFP M428fdw
- LaserJet Pro MFP M428m
- LaserJet Pro MFP M429dw
- LaserJet Pro MFP M429fdn
- LaserJet Pro MFP M429fdw
- Neverstop Laser MFP 1200a
- Neverstop Laser MFP 1200w
- Smart Tank 500 series
- Smart Tank 530 series
- Smart Tank Plus 570 series
- Fixed problem with some Samsung document feeders
- Improved color scans on flatbeds and document feeders
VueScan 9.6.43 (64-bit)
- Fixed problem with some network scanners (hang on startup) (some HP Laserjet scanners, also AirPrint scanners)
VueScan 9.6.42 (64-bit)
-Improved responsiveness with many document feeders (most Epson and HP scanners, also AirPrint scanners)
VueScan 9.6.41 (64-bit)
- Change log not available for this version
VueScan 9.6.40 (64-bit)
Added support for 25 new HP scanners:
- Officejet 8010
- Officejet 8020
- Officejet 9010
- Officejet Pro 8020
- Officejet Pro 8030
- Officejet Pro 9010
- Officejet Pro 9020
- Smart Tank 510
- Smart Tank 610
- Smart Tank Plus 550
- Smart Tank Plus 650
- Color LaserJet Managed Flow MFP E67660z
- Color LaserJet Managed MFP E67650dh
- Color LaserJet Managed MFP E77422a
- Color LaserJet Managed MFP E77422dn
- Color LaserJet Managed MFP E77422dv
- Color LaserJet Managed MFP E77428dn
- LaserJet Managed Flow MFP E62675z
- LaserJet Managed MFP E62655dn
- LaserJet Managed MFP E62665hs
- LaserJet Managed MFP E62665hs
- LaserJet MFP E72425a
- LaserJet MFP E72425dn
- LaserJet MFP E72425dv
- LaserJet MFP E72430dn
VueScan 9.6.39 (64-bit)
Added full support for 42 PIE/Reflecta film scanners:
- Braun FilmScan 120
- Kodak RFS 3600
- PIE ColorScan 3600
- PIE NatureScan
- PIE PowerFilm
- PIE PowerSlide 3600
- PIE PowerSlide 3650
- PIE PowerSlide 5000
- PIE PowerSlide X
- PIE PrimeFilm 120
- PIE PrimeFilm 120 Pro
- PIE PrimeFilm 1800 LAB
- PIE PrimeFilm 3600 Pro
- PIE PrimeFilm 3610 AFL
- PIE PrimeFilm 3650 LAB
- PIE PrimeFilm 3650 Pro3
- PIE PrimeFilm 3650U
- PIE PrimeFilm 7200
- PIE PrimeFilm 7250 Pro3
- PIE PrimeFilm 7250U
- PIE PrimeFilm X
- PIE PrimeFilm XA
- PIE PrimeFilm XAs
- PIE PrimeFilm XE
- PIE PrimeFilm XEs
- PIE PrimeHisto XE
- Reflecta CrystalScan 3600
- Reflecta CrystalScan 7200
- Reflecta DigitDia 3600
- Reflecta DigitDia 4000
- Reflecta DigitDia 5000
- Reflecta DigitDia 6000
- Reflecta DigitDia 7000
- Reflecta MF 5000
- Reflecta ProScan 10T
- Reflecta ProScan 3600
- Reflecta ProScan 4000
- Reflecta ProScan 7200
- Reflecta RPS 10M
- Reflecta RPS 3600
- Reflecta RPS 7200
- Uniscan FS120ICE
- All scanners work on Windows, Windows ARM, Mac OS X and Linux
- Full support for 6400 dpi, 7200 dpi and 10000 dpi scans
- Negative scans are faster
- Preview scans are faster
- Gray scans are faster
- Auto focus is more accurate (done with 16 bits instead of 8 bits)
- Multi sampling is improved
- Multi exposure is improved
- Multi sampling and multi exposure can be combined
- Scanning is often quieter
- Adds support for much longer exposure times (i.e. histology samples)
- No need to install CyberView X
- Supports older PIE scanners on all operating systems
- Used scanners can often be purchased on ebay.com for less than $200
- These scanners are now comparable to Nikon CoolScan scanners
VueScan 9.6.38 (64-bit)
- Improved support for PIE and Reflecta film scanners without CyberView X
- Fixed problem with some Epson document scanners
Added support for 8 new Epson scanners:
- DS-70
- DS-80W
- DS-870
- DS-970
- ES-50
- ES-55R
- ES-60W
- ES-65WR
VueScan 9.6.37 (64-bit)
- Improved support for many Brother scanners
- Improved support for PIE and Reflecta scanners without CyberView X
VueScan 9.6.36 (64-bit)
- Improved scan speed when 'Input | Media size' is 'Auto'
- Improved recognition when 'Input | Media' is set to 'Auto'
- Added support for Xerox Patriot D40 document scanner
- Fixed assorted small problems
- Added preliminary support for PIE and Reflecta scanners without CyberView
VueScan 9.6.35 (64-bit)
- Improved automatic media size detection
- Fixed problem with some Epson DS-series scanners
- Double-click with right mouse button sets color balance to default
- Fixed assorted small problems
Improved 'Input | Media' set to 'Color text':
- Produces much smaller JPEG, PDF and TIFF files
- Reduces visibility of wrinkles in paper
- Detected when 'Input | Media' set to 'Auto'
VueScan 9.6.34 (64-bit)
- Improved automatic cropping
- Improved automatic media detection
- Fixed problem with 'Prefs | Beep when done'
- Improved support for AirPrint/Scan (eSCL) scanners
- Improved support for some HP scanners
- Fixed problem with some Epson DS-series scanners and Fine mode
- Fixed problem with AVision AW-210
VueScan 9.6.33 (64-bit)
- Improved automatic cropping
- Improved cropping with black scanner lid
- Improved support for Epson DS-series scanners
- Improved support for some HP printer/scanner/copiers
- Fixed problem on Linux after running VueScan two times
VueScan 9.6.32 (64-bit)
- Improved automatic cropping
- Improved automatic media detection
- Fixed problem with Canon DR-M140 color
VueScan 9.6.31 (64-bit)
- Faster scan speed on flatbed and document feeder
- Improved automatic media detection
VueScan 9.6.30 (64-bit)
Improved support for automatic media size detection:
- More accurate automatic cropping on flatbed and feeder
- Faster scanning using flatbed with smaller images
- Stops scanning before lamp scans the whole flatbed
- Useful for photos, credit cards and other small scans
- Works with flatbed and document feeder
- Added a few standard crop sizes, including credit cards
- Fixed problem with some Epson plugins on Linux
VueScan 9.6.29 (64-bit)
Improved support for automatic media size detection:
- Detects most type of scans
- Set 'Input | Media size' to 'Auto' to enable
- Alternatively, set 'Crop | Crop size' to 'Auto' to enable
- Works with flatbed and document feeder
- Useful for scanning photos and odd sized papers
- Fixed problem with some options forgotten if VueScan crashes
VueScan 9.6.28 (64-bit)
Added support for 44 HP printer/scanner/copiers:
- Color LaserJet Managed Flow MFP E77822z
- Color LaserJet Managed Flow MFP E77825z
- Color LaserJet Managed Flow MFP E77830z
- Color LaserJet Managed Flow MFP E87640z
- Color LaserJet Managed Flow MFP E87640z
- Color LaserJet Managed Flow MFP E87660z
- Color LaserJet Managed MFP E77822dn
- Color LaserJet Managed MFP E77830dn
- Color LaserJet Managed MFP E87640dn
- Color LaserJet Managed MFP E87650dn
- Color LaserJet Managed MFP E87660dn
- Color LaserJet Pro MFP M179fw
- Color LaserJet Pro MFP M278cw
- Color LaserJet Pro MFP M278dn
- Color LaserJet Pro MFP M278nw
- Color LaserJet Pro MFP M279fdw
- Color LaserJet Pro MFP M280c2
- Color LaserJet Pro MFP M280cnw
- Color LaserJet Pro MFP M280nw
- Color LaserJet Pro MFP M281dne
- Ink Tank 310
- Ink Tank Wireless 410
- LaserJet Managed Flow MFP E72525z
- LaserJet Managed Flow MFP E72530z
- LaserJet Managed Flow MFP E72535z
- LaserJet Managed Flow MFP E82550z
- LaserJet Pro MFP M148dw
- LaserJet Pro MFP M148fdw
- LaserJet Pro MFP M149dw
- LaserJet Pro MFP M149fdw
- LaserJet Pro MFP M28a
- LaserJet Pro MFP M28w
- LaserJet Pro MFP M29a
- LaserJet Pro MFP M29w
- LaserJet Pro MFP M30a
- LaserJet Pro MFP M30c
- LaserJet Pro MFP M30cw
- LaserJet Pro MFP M30w
- LaserJet Pro MFP M31a
- LaserJet Pro MFP M31c
- LaserJet Pro MFP M31cw
- LaserJet Pro MFP M31w
- Smart Tank 350
- Smart Tank Wireless 450
Fixed problem with some older scanners:
- HP ScanJet 3800
- HP ScanJet 3970
- HP ScanJet 4070
- HP ScanJet 4370
- HP ScanJet G2710
- HP ScanJet G3010
- HP ScanJet G3110
- UMAX Astra 4900
- BenQ 5550
- Fixed problem with some PIE and Reflecta scanners
- Fixed problem with some Brother scanners on Linux
VueScan 9.6.27 (64-bit)
- Added support for automatic media size detection
- Set 'Input | Media size' to 'Auto' to enable
- Works with flatbed and document feeder
- If scanning full pages, will crop off white areas
- Useful for scanning photos and odd sized papers
- Fixed problem with some Brother scanners
- Fixed problem with some Fujitsu scanners
- Fixed problem with some HP scanners
- Fixed problem with some Minolta scanners
- Fixed problem with Epson ET-7700 scan quality
VueScan 9.6.26 (64-bit)
- Added support for 8 Fujitsu portable scanners: fi-60F, fi-65F, ScanSnap S1100, ScanSnap S1100i, ScanSnap S1300, ScanSnap S1300i, ScanSnap S300, ScanSnap S300M
- Fixed problem with some Brother printer/scanner/copiers
- Fixed problem with some Canon LiDE scanners on Windows
VueScan 9.6.25 (64-bit)
Added support for 4 new Canon scanners:
- TR4500
- TS6200
- TS8200
- TS9500
Fixed:
- Fixed problem with some Epson printer/scanner/copiers
- Fixed problem with some HP printer/scanner/copiers
- Fixed duplex scanning with Samsung CLX-6200
- Fixed problem with Brother MFC-L2700DW
VueScan 9.6.24 (64-bit)
- Improved color with some Epson ESC/I-2 scanners
- Faster startup with some USB scanners
- Fixed problem with HP ScanJet 4400c and 4470c
VueScan 9.6.23 (64-bit)
- Improved support for AirPrint/Scan (eSCL) scanners
- Faster reaction to Cancel button on Mac OS X and Linux
- Canon LiDE 300 and LiDE 400
- Most newer HP printer/scanner/copiers
- Most newer HP document scanners
- Support for most AirPrint/Scan (eSCL) scanners over USB
- Support for future eSCL scanners without upgrading VueScan
VueScan 9.6.22 (64-bit)
- Added support for Canon LiDE 300 and LiDE 400
- Added support for Fujitsu iX1500
Added support for 29 new Brother scanners:
- DCP-9030CDN
- DCP-J572DW
- DCP-J572N
- DCP-J577N
- DCP-L3510CDW
- DCP-L3517CDW
- DCP-L3550CDW
- DCP-L3551CDW
- HL-L3290CDW
- MFC-9150CDN
- MFC-9350CDW
- MFC-J491DW
- MFC-J497DW
- MFC-J5630CDW
- MFC-J5845DW
- MFC-J5945DW
- MFC-J6545DW
- MFC-J6583CDW
- MFC-J6945DW
- MFC-J6947DW
- MFC-J6983CDW
- MFC-J6997CDW
- MFC-J6999CDW
- MFC-L3710CW
- MFC-L3730CDN
- MFC-L3735CDN
- MFC-L3745CDW
- MFC-L3750CDW
- MFC-L3770CDW
VueScan 9.6.21 (64-bit)
- Fixed problem with some PIE and Reflecta scanners on Mac OS X
- Fixed problem with some Fujitsu scanners (especially fi-4120)
- Fixed problem with some HP ScanJet document scanners
- Fixed problem with some newer AVision scanners (especially AD280F)
- Added support for "Input | Overscan" with some AVision scanners
VueScan 9.6.20 (64-bit)
- Improved support for some older Brother scanners
- Added support for installing Photoshop CC 2019 plugin
Added support for 'Input | Page border' option:
- For scanners that can add a 5 mm white border around a scan
- Currently only supports some Epson DS-series scanners
You can lock options settings by write-protecting vuescan.ini:
- This lets you set up starting options for any user
- This can be used to implement a 'Kiosk mode'
- This can be used to set up a scanning user account
VueScan 9.6.19 (64-bit)
- Improved support for changing color theme while running
- Added support for Cut/Copy/Paste on Mac (Apple-X/Apple-C/Apple-V))
- Added support for 'Input | Overscan'
- For photos - puts a border around scans
- Supports most Fujitsu fi-series and iX-series scanners
- Supports most Epson document scanners
- Added support for 'Input | Double feed detect'
- For scanners that have ultrasonic double-feed detection
- Supports most Fujitsu fi-series and iX-series scanners
- Supports most Canon DR-series document scanners
VueScan 9.6.18 (64-bit)
- Improved user interface (integrated wxWidgets 3.1)
VueScan 9.6.17 (64-bit)
- Improved support for PIE and Reflecta scanners
- Improved support for color themes on Windows, Mac and Linux
- Assorted small bug fixes
- Added support for new Brother scanners: DCP-J1100DW, DCP-J772DW, DCP-J774DW, DCP-J972N, DCP-J973N, DCP-J978N, DCP-J988N, MFC-J1300DW, MFC-J1500N, MFC-J690DW, MFC-J890DW, MFC-J893N, MFC-J895DW, MFC-J898N, MFC-J995DW
VueScan 9.6.16 (64-bit)
- Added support for new Epson scanners: DS-1610 , DS-535 , DS-775 , EP-30VA , EP-709A , EP-710A , EP-711A , EP-810A , EP-811A , EP-880A , EP-881A , EP-979A3 , ES-300WR , ES-500WR , ET-2710 , ET-8700 , L3110 , L3150 , L380 , LX-10000F , LX-7000F , PX-M380F , PX-M381FL , PX-M7070FX , PX-M884F , PX-M886FL , WF-2860 , WF-C17590 , WF-C20590 , WF-C5710 , WF-C5790 , WF-C8690 , WF-C869R , XP-250 , XP-350 , XP-450
VueScan 9.6.15 (64-bit)
- Fixed an assortment of small problems
- Added support for new Canon scanners: G2010 series, G3010 series, G4010 series, XK50, XK70
VueScan 9.6.14 (64-bit)
- Fixed problem on some high-resolution Windows displays
- Fixed problem with some WIA scanners on Windows
- Added support for user-specified watermarks
- Use 'Output | Watermark 1' and 'Output | Watermark 2'
- Set 'Input | Options' to 'Professional' to use this
VueScan 9.6.13 (64-bit)
- Improved automatic cropping of photos
Improved batch scanning of photos:
- Best using scanner with straight feeding, without bending
- Best to feed in long direction for minimal skew
- Best to scan photos to JPEG
- Tape black paper to lid if using flatbed (helps scan white borders)
- Open scanner and clean glass if you get vertical stripes
- (Future version of VueScan will improve 'Input | Auto skew')
Best scanners for batch scanning photos:
- Fujitsu document scanners
- Canon DR-series
- Brother ADS-series
- Avision document scanners
- Epson FF-640
- Epson GT-S50
- Epson GT-S80
- Epson ES-400
- Epson ES-500
- Epson DS-530
- Epson DS-575
VueScan 9.6.12 (64-bit)
- If set to 'Off', one file per scan is produced
- If set to 'On', one file can have any number of pages
If set to 'Blank page', a blank page causes a new file to be started:
- Option enabled if 'Input | Mode' set to 'Doc Feeder' or 'Duplex Feeder'
- Blank pages are not saved
If set to 'Front/Back', the front and back of a duplex scan saved per file:
- Option enabled if 'Input | Mode' set to 'Duplex Feeder'
- Useful for scanning postcards (two sided)
- Useful for batch scanning photos, with writing on the back of some
- Useful for scanning two-sided pages to separate files
- If 'Input | Blank page removal' is set, a blank side isn't saved. Useful if only some photos or pages have writing on the back
Enhanced multi page options:
- Output | TIFF multi page
- Output | JPEG multi page
- Output | PDF multi page
- Output | OCR text multi page
When scanning photos, set 'Input | Media size' to photo size or larger:
- Also set 'Crop | Crop size' to photo size
VueScan 9.6.11 (32-bit)
- Changed default button to Scan/Scan+ for some flatbed scans
- Turned off 'Prefs | Auto load options' by default (unless vuescan.ini exists), (this solves problems when accidentally changing options settings)
- Added support for Xerox DocuMate 4440
- Fixed problem with Canon MG5600 at 1200 dpi
VueScan 9.6.10 (64-bit)
- Significantly improved automatic cropping
VueScan 9.6.08 (64-bit)
- Fixed problem with Canon MX520
- Fixed problem with some eSCL (AirPrint/Scan) scanners
- Fixed problem with HP Scanjet Pro 2500 f1
- Fixed problem with PIE PowerSlide X
- Fixed miscellaneous small problems
VueScan 9.6.07 (64-bit)
- Improved support for WIA scanners on Windows
- Added support for using script for 'Prefs | Viewer'
- Can use .bat file on Windows
- Can use .sh or .csh file on Mac OS X and Linux
- Added support for higher resolution scans on some Epson document scanners
- Faster termination of transparency scan on Epson scanners with lamp covered
- Fixed miscellaneous small problems
VueScan 9.6.06 (64-bit)
- Improved support for some HP printer/scanner/copiers
- Fixed problem when both USB and networked scanners connected
VueScan 9.6.05 (64-bit)
- Reduced size of color PDF files by 30% to 50%
- Changed default setting for Doc Feeder to B/W text
- Fixed problem with duplex with AirPrint/eSCL MFPs
VueScan 9.6.04 (64-bit)
- Fixed problems with AirPrint/eSCL MFPs
Added support for networked business MFPs:
- Gestetner
- infotec
- Konica Minolta
- Lanier
- NRG
- Ricoh
- Savin
VueScan 9.6.03 (64-bit)
- Added support for scanning from AirPrint MFPs
- Several hundred new models supported
- Works on Windows, Mac OS X and Linux
- Faster scanning with some networked MFPs
- User interface improvements
VueScan 9.6.02 (64-bit)
Added support for 2 new Epson printer/scanner/copiers:
- WF-7710
- WF-7720
Added support for 37 new Brother printer/scanner/copiers:
- DCP-7090
- DCP-7095D
- DCP-7190D
- DCP-7195DW
- DCP-B7500D
- DCP-B7520DW
- DCP-B7530DN
- DCP-B7535DW
- DCP-L2510D
- DCP-L2530DW
- DCP-L2535D
- DCP-L2535DW
- DCP-L2537DW
- DCP-L2550DN
- DCP-L2550DW
- DCP-L2551DN
- FAX-L2710D
- HL-L2390DW
- HL-L2395DW
- MFC-7390
- MFC-7490D
- MFC-7890DN
- MFC-7895DW
- MFC-B7700D
- MFC-B7715DW
- MFC-B7720DN
- MFC-L2690DW
- MFC-L2710DN
- MFC-L2710DW
- MFC-L2713DW
- MFC-L2715D
- MFC-L2715DW
- MFC-L2717DW
- MFC-L2730DN
- MFC-L2730DW
- MFC-L2750DW
- MFC-L2770DW
VueScan 9.6.01 (64-bit)
- User interface easier to use
- Added VueScan a64 for Windows 10 ARM
- Added 'Help | Update' command to install VueScan updates
- No longer show tips dialog on startup
VueScan 9.5.94 (64-bit)
Added support for e-mailing the most recent scan:
- Use 'EMail' button (next to 'View' button) to send e-mail
- You're prompted to enter 'Email To:' and 'Email Subject:'
- Requires Professional Edition
- Uses http://appmail.hamrick.com to send email
- Scans are forwarded, not written to our server's hard drive
- On Linux, you need to install curl (/usr/bin/curl)
VueScan 9.5.93 (64-bit)
- Added support for Epson XP-6000
- Fixed problem with network-connected HP LaserJet MFP M278-M281
- Fixed problem with 1200 dpi scans with some LaserJet MFPs
- Fixed problem with some Brother scanners
- Fixed problem with Plustek OpticSlim 1180 on Mac OS X
- Fixed problem with Nikon LS-8000/LS-9000 focusing
Under-the-hood improvements:
- Updated Windows compiler to Visual Studio 2017
- Added drivers for Windows 10 ARM (untested)
- Updated Linux build to use Ubuntu 16.04 LTS
VueScan 9.5.92 (64-bit)
- Added support for HP LaserJet MFP M278-281
- Improved finding networked scanners on some slow networks
- Improved handling of end of page with Avision scanners
- Improved scan speed with Fujitsu fi-6770
- Improved support for Plustek OpticFilm 135
- Fixed problem with some Epson ESC/I-2 document scanners
- Fixed problem with saving to multiple files with long names
- Fixed problem with HP ScanJet 4p document feeder
- Fixed problem with some Brother scanners
VueScan 9.5.91 (64-bit)
- Changed to only show 'Save' and 'Save+' when not already saved
- Improved ADF centering with some Epson scanners
- Fixed problem with some Epson ESC/I-2 document scanners
Added support for 11 new HP scanners:
- Deskjet 2200
- Deskjet 2600
- Deskjet 5000
- Deskjet 5200
- ENVY 5000
- ENVY Photo 6200
- ENVY Photo 7100
- ENVY Photo 7800
- Officejet 5200
- Officejet Pro 7720
- Officejet Pro 7730
VueScan 9.5.90 (64-bit)
- Faster startup with some scanners
- Improved support for 35 Epson ESC/I-2 document scanners
- (also adds support for these scanners on Mac OS X and Linux)
- DS-1630
- DS-1660W
- DS-320
- DS-360W
- DS-40
- DS-410
- DS-50000
- DS-510
- DS-520
- DS-5500
- DS-560
- DS-570W
- EP-879A
- ES-200
- ES-300W
- ES-400
- ES-500W
- ET-2700
- ET-2750
- ET-3700
- ET-4750
- ET-7700
- FF-640
- PX-M680F
- PX-M780F
- PX-M781F
- PX-M860F
- WF-3720
- WF-4720
- WF-4730
- WF-4740
- WF-6530
- WF-6590
- WF-8510
- WF-R8590
VueScan 9.5.89 (64-bit)
- Significantly improved automatic cropping
- Fixed problem with Canon DR-3080CII
- Fixed problem with HP LaserJet M426 and M427 with USB
- Added support for 8 Epson printer/scanner/copiers
- ET-2700
- ET-2750
- ET-3700
- ET-3750
- ET-4750
- ET-7700
- ET-7750
- XP-8500
VueScan 9.5.88 (64-bit)
- Added support for auto cropping with black background
Added support for 7 Canon printer/scanner/copiers:
- TS3100 series
- TS5100 series
- TS6100 series
- TS8100 series
- TS9100 series
- TR7500 series
- TR8500 series
VueScan 9.5.87 (64-bit)
Added support for 172 Avision scanners:
- AD125
- AD215W
- AD250
- AH118
- AH125
- AH130
- AH135
- AH225
- AH235
- AH240
- AH245
- AH255
- AH260
- AH2600
- AH330
- AH3400
- AH360
- AH380
- AH50
- AH610
- AH617
- AH620
- AH625
- AH640
- AI130
- AI140
- AI150
- AI160
- AI170
- AI180
- AI180+
- AI2010
- AI260
- AI280
- AI3000
- AI370
- AI370
- AI380
- AI390
- AI530
- AI550
- AI620
- AN230W
- AT130
- AT160
- AT185
- AT200
- AT260
- AT270
- AT300
- AT313
- AT320A
- AT322
- AT360
- AT366
- AT500
- AT510
- AT580
- AT580U
- AT650
- AT660
- AT83
- AV1860
- AV188
- AV220G
- AV280
- AV3200U+
- AV3220U
- AV50F+
- AV5200
- AV5400
- AV750
- AV8300
- AV830S
- AW1230
- AW1260
- AW1620
- AW1810
- AW1820
- AW1900
- AW2000
- AW2860
- AW570
- AW6100
- AW6120
- AW6160
- AW6200
- AW6280
- AW6300
- DSL3200
- DSL3930
- DSL8160
- DSL8280
- FB1200+
- FB1600
- FBH1000
- FBH2000
- FBH2100
- FBH2200E
- FBH5000
- FBH6100
- FBH6300
- FBH6350E
- FBH6380E
- FBZ160
- FBZ360
- FZ90
- WinMage C100
- WinMage C100+
- WinMage C200
- WinMage C500
- WinMage C500+
- WinMage C600
- WinMage C700
- WinMage D120
- WinMage D120+
- WinMage D220
- WinMage D520
- WinMage D520+
- WinMage D6000
- WinMage D650
- WinMage E1000
- WinMage E1000+
- WinMage E2000
- WinMage E5000
- WinMage E5000+
- WinMage F1300
- WinMage F5300
- WinMage F5300+
- WinMage G1100
- WinMage G2100
- WinMage G5100
- WinMage G7100
- WinMage G7120
- WinMage L1250
- WinMage L2230
- WinMage L5100
- WinMage L5250
- WinMage L6250
- WinMage L7250
- WinMage L7280
- WinMage L7280+
- WinMage L7350
- WinMage M110
- WinMage M1160
- WinMage M1200
- WinMage M1360
- WinMage M1600
- WinMage M1800
- WinMage M2100
- WinMage M2200
- WinMage M2480
- WinMage M2580E
- WinMage M3000
- WinMage M3200
- WinMage Q2120E
- WinMage Q2200E
- WinMage Q520
- WinMage Q7100
- WinMage Q7250
- WinMage Q8150
- WinMage S125
- WinMage S125+
- WinMage S525
- WinMage T110
- WinMage T230
- WinMage T510
- WinMage U315
- WinMage U350
- WinMage U370
- WinMage U380
- WinMage U390
VueScan 9.5.86 (64-bit)
- Fixed problem with changed output file types when restarting
- Fixed problem with some newer Avision scanners when scanning text
- Fixed problem with mirroring on Canon DR-F120 and DR-C240
- Fixed problem with Brother MFC-L2740DW
- Fixed problem on Windows when full path name longer than 256
- Fixed problem on Windows with temporary files not deleted on exit
VueScan 9.5.85 (64-bit)
- Fixed problem with Brother MFC-J6930DW duplex scans
- Fixed problem with HP Officejet Pro 8730 duplex scans
- Fixed problem with Epson WF-3720 on Windows
- Fixed problem with Xerox 3635MFP on Windows
- Fixed problem with Canon DR-F120 scanner
VueScan 9.5.84 (64-bit)
- Fixed problem with some Canon DR-series scanners
- Faster scanning with some Fujitsu document scanners
VueScan 9.5.83 (64-bit)
- Change log not available for this version
VueScan 9.5.82 (64-bit)
- Improved scan speed with some Samsung scanners
- Added support for film strips up to 100 frames on PIE/Reflecta scanners
- Fixed problem with some Brother scanners
- Fixed problem with some Fujitsu scanners on Windows
- Fixed hangs on Windows when some networked scanners turned off
- Fixed hangs with some types of webcams
VueScan 9.5.81 (64-bit)
- Added support for Epson L485 and L486
Added support for legal-size scans (14 inches) with:
- Genius ColorPage SF600
- Iris Iriscan Express 2
- Plustek OpticSlim M12
- Fixed problem with some Canon DR-series scanners
- Improved scan speed with Fujitsu fi-6140Z
- Added support for auto-focus on Epson Expression 12000
- Fixed problem with some Fujitsu scanners on Windows
- SP-25
- fi-6120ZLA
- fi-6125ZLA
- fi-6130ZLA
- fi-6135ZLA
- fi-6140ZLA
- fi-6220ZLA
- fi-6225ZLA
- fi-6230ZLA
- fi-6235ZLA
- fi-6240ZLA
VueScan 9.5.80 (64-bit)
- Improved scan quality with some Minolta film scanners
- Added support for HP Deskjet 3700
- Added support for duplex scanning with some Samsung scanners
- Fixed problem with Microtek ArtixScan 120tf
- Fixed problem with Brother ADS-1500W and ADS-1600W
VueScan 9.5.79 (64-bit)
Added support for 14 Epson printer/scanner/copiers:
- DS-320
- L385
- L386
- PX-M680F
- PX-M780F
- PX-M781F
- WF-3720
- WF-4720
- WF-4730
- WF-4740
- XP-240
- XP-243
- XP-245
- XP-247
Added support for 12 Canon printer/scanner/copiers:
- iR C3020
- iR C3025
- MF631C
- MF632C
- MF633C
- MF634C
- MF635C
- MF731C
- MF732C
- MF733C
- MF734C
- MF735C
VueScan 9.5.78 (64-bit)
- Fixed problem with automatic detection of color scans
- Fixed problem with duplex on HP Officejet Pro 8720
- Fixed problem with duplex on Brother ADS-2800W
- Fixed problem with reading multi-page TIFF files
- Added support for Canon G4000
- Added support for Epson ET-2650, EP-M570T, L496
VueScan 9.5.77 (64-bit)
- Fixed problem with crashing in 9.5.76
- Fixed problem with some Brother scanners
- Added support for reading multi-page TIFF files
VueScan 9.5.76 (64-bit)
- Improved auto-detection of 'Input | Media"
- Improved blank page removal
VueScan 9.5.75 (64-bit)
- Added 'Help | Help center..." for online help
- Added support for 7200 dpi with PrimeFilm 7250 PRO
- Added auto-focus support with Epson Expression 1640XL / ES-8500
VueScan 9.5.74 (64-bit)
- Added support for full 8.5 inch width on some Brother scanners
- Added support for more than 15 networked scanners (up to 63)
- Added support for higher resolutions on Canon MG5400
- Fixed problem with HP OfficeJet 3830
- Fixed problem with some Avision and HP scanners
- Fixed problem with Epson WF-7610
VueScan 9.5.73 (64-bit)
- Added support for duplex scanning with Epson XP-830
- Added support for Epson XP-340 Series (XP-342 343 345)
- Fixed problem with some network connected HP LaserJet MFPs
- Fixed problem with 16mm film adapter on Nikon CoolScan 8000/9000
- Fixed problem with 1200 dpi scans on Canon MG6600
- Improved Italian translation of VueScan
VueScan 9.5.72 (64-bit)
- Added support for Epson EP-879A
- Fixed document feeder centering with Epson ET-16500
- Fixed problem with Samsung SCX-4623FW
- Improved scan speed with Fujitsu iX500
- Improved scan speed with some older HP printer/scanner/copiers
VueScan 9.5.71 (64-bit)
- Added support for Epson XP-900
- Added support for duplex scanning on some Samsung, Xerox and Dell scanners
- Added support for network scanning on some Samsung, Xerox and Dell scanners
- Fixed problem with some Canon DR-series scanners
Added support for 27 Xerox printer/scanner/copiers:
- Phaser 3100MFP
- Phaser 3300MFP
- Phaser 3635MFP
- Phaser 6110MFP
- Phaser 6115MFP
- Phaser 6121MFP
- Phaser 6128MFP
- Phaser 3200MFP
- WorkCentre 3025
- WorkCentre 3045
- WorkCentre 3119
- WorkCentre 3210
- WorkCentre 3215
- WorkCentre 3220
- WorkCentre 3225
- WorkCentre 3315
- WorkCentre 3325
- WorkCentre 3550
- WorkCentre 3615
- WorkCentre 4118
- WorkCentre 5016
- WorkCentre 5019
- WorkCentre 5020
- WorkCentre 5021
- WorkCentre 6015
- WorkCentre PE120
- WorkCentre PE220
Added support for 2 Dell printer/scanner/copiers:
- 1235cn
- 1815dn
VueScan 9.5.69 (64-bit)
- Added support for duplex scans with Canon MB5100 and MB5400
- Fixed problem recognizing some networked HP scanners
- Fixed problem with Canon DR-M160
- Fixed problem with Canon DR-7580
- Fixed problem with Epson ES-500W on Windows
- Fixed problem with some Brother ADS-series scanners
- Fixed problem with doc feeder centering with Fujitsu fi-5750
Fixed problem with some Canon scanners:
- MF210
- MF220
- MF620C
- MF720C
VueScan 9.5.68 (64-bit)
Easier scanning of many snapshots:
- Set 'Input | Media size' a bit larger than largest snapshot
- Put snapshot on flatbed in upper left corner
- Press 'Enter' key (or click 'Preview' button)
- Adjust cropping with mouse (if necessary)
- Press 'Enter' key (or click 'Save' button) to save to file
- Go to step 2
Easier scanning of scrapbooks:
- Set 'Input | Media size' a bit larger than largest page
- Put scrapbook on flatbed in upper left corner
- Press 'Enter' key (or click 'Preview' button)
- Adjust cropping with mouse (if necessary)
- Press 'Enter' key (or click 'Save' button) to save to file
- Repeat steps 4-5 for each additional image
- Go to step 2
VueScan 9.5.67 (64-bit)
Added support for 17 new HP scanners:
- HP LaserJet Pro MFP M130a"
- HP LaserJet Pro MFP M130nw"
- HP LaserJet Pro MFP M130fn"
- HP LaserJet Pro MFP M130fw"
- HP LaserJet Pro MFP M132a"
- HP LaserJet Pro MFP M132fn"
- HP LaserJet Pro MFP M132fp"
- HP LaserJet Pro MFP M132fw"
- HP LaserJet Pro MFP M132nw"
- HP LaserJet Pro MFP M132snw"
- HP LaserJet Pro MFP M133a"
- HP LaserJet Pro MFP M133fn"
- HP LaserJet Pro MFP M134a"
- HP LaserJet Pro MFP M134fn"
- HP LaserJet Pro MFP M227sdn"
- HP LaserJet Pro MFP M227fdw"
- HP OfficeJet 6950
Added support for 5 new Brother scanners:
- DCP-L8410CDW
- MFC-L8610CDW
- MFC-L8690CDW
- MFC-L8900CDW
- MFC-L9570CDW
Added support for 3 new Epson scanners:
- DS-G20000
- Expression 12000XL
- LP-M8170
VueScan 9.5.66 (64-bit)
- Only display tips on startup if unregistered
- Fixed problem with duplex scans on some HP scanners
- Fixed problem with some ADS Brother scanners
- Fixed problem with Fujitsu fi-5650
- Fixed problem with HP ScanJet 3000 on Mac OS X
- Fixed problem with HP 4p and 6100c document feeder
- Added support for HP Deskjet 3830 document feeder
- Added support for 150 dpi on Epson GT-1500
VueScan 9.5.65 (64-bit)
Added support for 2 new Epson scanners:
- XP-540
- XP-640
Support for 6 new HP scanners:
- HP Color LaserJet Enterprise Flow MFP M577c
- HP Color LaserJet Enterprise Flow MFP M577cm
- HP Color LaserJet Enterprise Flow MFP M577z
- HP Color LaserJet Enterprise MFP M577dn
- HP Color LaserJet Enterprise MFP M577dnm
- HP Color LaserJet Enterprise MFP M577f
Changed:
- Default 'Crop | Buffer (%)' to 8%
- Default 'Output | Color space' to 'sRGB' on Mac
- Default 'Output | Monitor color space' to 'sRGB' on Mac
Fixed:
- Problem with scanning color negatives on Epson V800/V850
- Problem with HP ScanJet 3670
- Doc feeder centering with Fujitsu fi-5530 and fi-5750
- Problem with Brother MFC-L2700D (doesn't support 1200 dpi)
VueScan 9.5.64 (64-bit)
- Automatically changes to Flatbed if no document in Feeder
- Fixed problem with document feeder centering with Epson WF-3620
- Fixed problem with some networked Samsung printer/scanner/copiers
Added support for 7 new Epson scanners:
- DS-310
- DS-360W
- DS-570W
- ES-200
- ES-300W
- ES-400
- ES-500W
VueScan 9.5.63 (64-bit)
- Fixed problem with document feeder centering with Brother MFC-J6925DW
- Fixed problem with Canon LiDE 100/110/120/200/210/220 on some systems
- Fixed problem with 'Input | Options' changing when 'Help | About' used
- Fixed problem with Preview.app on Mac OS X 10.11 and 10.12
VueScan 9.5.62 (64-bit)
- Added support for 44 additional Avision scanners: AD125S, AD215, AD215L, AD215U, AD230, AD240, AD240S, AD250F, AD260, AD280, AN120FW, AN240, AN240W, AN280F, AV175+, AV1750, AV176+, AV1760, AV176U, AV178+, AV185+, AV186+, AV187, AV1880, AV32, AV320E2+, AV620C2+, AV620N, AVA6+, AW210, DSL2200, DSL2600, DSL3100, DSL3300, DSL3700, DSL8000, DSL8100, FB1000N, FB1200, FB5000, FB6200, FB6280E, IS1000, SC8800
VueScan 9.5.61 (64-bit)
- Added support for plugin for Photoshop CC 2017
- Added preliminary support for Plustek ePhoto Z300
- Fixed problem with duplex scanning with some Fujitsu scanners
- Fixed problem with some older HP scanners
- Fixed problem with duplex scanning on HP CM2320fxi
- Fixed problem with some Canon DR-series scanners
- Fixed problem with duplex scanning with Epson WF-7610 and WF-7620
- Fixed problem with HP PageWide Pro 577 WiFi connection
- Made default for OCR output plain text format (not RTF)
- Added support for 25 new Brother scanners: DCP-J567N, DCP-J767N, DCP-J968N, MFC-J2330DW, MFC-J2730DW, MFC-J3530DW, MFC-J3930DW, MFC-J5330DW, MFC-J5335DW, MFC-J5730DW, MFC-J5830DW, MFC-J5930DW, MFC-J6530DW, MFC-J6535DW, MFC-J6580CDW, MFC-J6730DW, MFC-J6930DW, MFC-J6935DW, MFC-J6980CDW, MFC-J6995CDW, MFC-J737DN, MFC-J837DN, MFC-J887N, MFC-J907DN, MFC-J997DN
VueScan 9.5.60 (64-bit)
- Added support for duplex scanning with HP LaserJet CM2320fxi
- Fixed problem with some HP N-series scanners on Windows
- Fixed problem with Canon MG5700
- Fixed problem with HP OfficeJet Pro 8740 with network connection
- Only support scanning from video devices with more than 2 MPixels
更新時間：2020-01-02
更新細節：
更新時間：2020-01-01
更新細節：
What's new in this version:
- This release contains fixes for bugs reported against NumPy 1.17.4 along with some build improvements. The Python versions supported in this release are 3.5-3.8
- Downstream developers should use Cython >= 0.29.14 for Python 3.8 support and OpenBLAS >= 3.7 to avoid errors on the Skylake architecture
- It is recommended that developers interested in the new random bit generators upgrade to the NumPy 1.18.x series, as it has updated documentation and many small improvements
更新時間：2020-01-01
更新細節：
What's new in this version:
- New union territories of Jammu & Kashmir and Ladakh are supported to help you have an easy and quick transition from 1st January 2020
- Computation Report for Kerala Flood Cess is made available to help you prepare your KFC-A returns, if it is applicable to you
- Changes in Income Tax, TDS and TCS as necessitated by changes in budget or introduction of new validation tools, are supported now
- In addition, there are certain product improvements including optimization of product performance
更新時間：2020-01-01
更新細節：
What's new in this version:
- The NumPy 1.16.6 release fixes bugs reported against the 1.16.5 release, and also backports several enhancements from master that seem
appropriate for a release series that is the last to support Python 2.7. The wheels on PyPI are linked with OpenBLAS v0.3.7, which should fix
errors on Skylake series cpus.
- Downstream developers building this release should use Cython >= 0.29.2 and, if using OpenBLAS, OpenBLAS >= v0.3.7. The supported Python
versions are 2.7 and 3.5-3.7
更新時間：2020-01-01
更新細節：
What's new in this version:
- fixed Samsung .scm support (ChanSort.Loader.Samsung.ini file was missing)
- added Polarity information for Samsung .scm and .zip lists
更新時間：2020-01-01
更新細節：
What's new in this version:
Process Lasso 9.5.1.0 (64-bit)
- Allow hundredths precision in Watchdog (advanced rules)
- Fixes and improvements to Watchdog
- Expanded new Regular Expressions to ProBalance Exclusions
- GUI.Watchdog: Improve config dialog up/down button behavior
- Core: Populate command line field to watchdog log type action events
- CPUEater: Fix status bar overlap with 'just took action' static control
- Change copyright years to 2020
- Language updates
- GUI: Remove checkbox on 'Uninstall BHP' menu item
- Core.Watchdog: Improve handling of redundant log entries
- Core.Watchdog: Log actions even if no setting change was necessary (process already at target)
- Core.Watchdog: Other fixes and enhancements
- Core.Watchdog: Minor optimizations
- GUI: Update Slovenian
- GUI: Restore primary listview filter update on items add/removed
- Core: Support RegEx in ProBalance exclusions
- GUI: Add process match help to ProBalance exclusion dialog
- GUI.ActionsLog: Fix to context menu items and auto-select of any matching running process
- GUI: Change to 'process match' listview column headers in config dialogs
- GUI: Add tooltip to Watchdog 'Divide CPU % by total core count' option
- Uninstall: Delete desktop shortcut
- Core/GUI.Watchdog: CPU and memory thresholds now allow precision in hundredths
- GUI: Update Russian
Process Lasso 9.5.0.40 (64-bit)
- Added Regular Expression matching to multiple fields for Instance Balancer, Watchdog, and CPU Limiter rules. See documentation on process matching
- Optimizations to GUI
- Improvements to Active Processes tab
Fixes and enhancements:
- GUI: Restore average CPU utilization to active processes tab
- GUI: Watchdog dialog: Replace CPU % threshold drop-down with edit box
- GUI: Watchdog dialog: Round CPU % given in decimal to nearest integer pending Watchdog support for such
- GUI: Bring existing instance of Insights to foreground if already running
- Core: Fix issue with traditional rules when user is appended after single character process match (e.g. *:jerem)
- Insights: Added menu item for Advanced ProBalance Options dialog
- Insights: Fix some settings could revert when changed from Advanced ProBalance Options dialog
- GUI: Make Process Lasso info (e.g. config path) selectable in About Dialog for copy/paste
- GUI: Instance Balancer dialog: Show error when user tries to add static core count rule with 0 cores specified
- GUI: Assortment of small cosmetic and internal improvements
- GUI: Optimizations
- GUI: Fix a filter issue with mixed case in some fields
- GUI: Rewrote process icon management
- GUI: Some refactoring of Active Processes tab code
- Core: Add RegEx (and multi-field) support to CPU Limiter, Watchdog, and Instance Balancer
- GUI: Add 'help' buttons beside process match strings for Instance Balancer, CPULimiter, and Watchdog
- Core: Fix Instance Balancer issue when total logical cores is not evenly divisible by per-instance core count
- GUI: Add Windows 10/2019 build number to status bar
- GUI: Support Dark Mode up to Win10 build 19536
- GUI: Add 'View / Colors / Always allow Dark Mode' for user over-ride on untested new Win10 builds
- GUI: Change priority adjusted log action text to remove colon
- GUI: Fix a reported GUI crash
- GUI: Add dynamic (updating) RAM stats to SmartTrim dialog
- GUI: Remove cache size from status bar RAM part
- Core.InstanceBalancer: Allow 'childof:' prefix to be any character case
- GUI: Fix Show/hide graph button one pixel too wide in Active Processes view
- GUI: Show icons in Active Processes tab
- Language updates
Process Lasso 9.4.0.70 (64-bit)
- GUI: Active Processes: Add sensitivity adjustment slider shown above list
- GUI: Fix to ‘File / Choose alternate log folder’
- GUI: Dark Mode support for Windows 10 19025
- GUI: Several other small and cosmetic enhancements
- Log: Standardize CSV output, adding headers, quotes and removing BOM
- Log: LogViewer: Add full history CSV export in addition to current view export
- Log: Fix main GUI ‘File / Export log to CSV’ would not export full history
- Core: Improved process suspend function, now compatible with Resource Monitor
- Core: Improved legacy hard throttle function
Process Lasso 9.4.0.46 (64-bit)
- Minor fixes and enhancements
- Update Chinese and Slovenian
Process Lasso 9.4.0.28 (64-bit)
- GUI: Support Windows 10 Dark Mode and interface with OS setting
- GUI: Dark Mode improvements
- GUI: Add tooltips to CPU utilization graphs
- GUI: Show active config profile on graph, if used
- GUI: Self-restart now opens with main window visible
- GUI: Fix governor could be inappropriately stopped by GUI on session exit
- Core: Fix use of Performance Mode when Governor running as service
- Core: Fix ‘Hide Suspended Processes’ was defaulting to true
- TweakScheduler: Zero ratio bits when fixed length quanta used
- InstallHelper: Preserve character case of global config path
- InstallHelper: New modern browse dialogs for global log and config folders
- All: Many other optimizations, fixes and enhancements
Process Lasso 9.3.0.74 (64-bit)
- GUI: Fix an issue with wildcard matching for persistent I/O priority classes
- GUI: Fix formatting in status bar when system RAM GB is more than 2 digits (>99GB)
- GUI: Update Chinese, Russian, Slovenian
- Core: Default ‘also check rules for path matches’ to true
- Licensing: Allow Performance Mode process list to be edited in free edition
- Licensing: Allow use of ProBalance advanced option ‘Restrain by CPU Affinity’ in free edition
- All: Other additions, fixes and enhancements
Process Lasso 9.3.0.64 (64-bit)
- GUI: Add CPU bitmask edit control to CPU Affinity selection dialog
- GUI/Core: Add selection for power plan to use with Performance Mode, in case user desires something other than BHP (e.g. AMD Ryzen High Performance)
- GUI: Add license name graph overlay in lower-left region
- GUI: Fix crash seen after selecting process context menu items after target process had terminated
- GUI: Add warning about use of multiple configuration profiles while governor as service
- GUI: Speed process icon population
- GUI: Update PTBR
- Settings: Change default ‘hide suspended processes’ to OFF
- All: Other additions, fixes and enhancements
Process Lasso 9.3.0.44 (64-bit)
- Core: Allow duration of 0 to indicate indefinite period in CPU Limiter rules
- Core: Allow larger max integer values in CPU Limiter rules
- GUI: Expand edit control widths on CPU Limiter dialog
- Core: Remove some deprecated code from governor
- Core Exclude vmmem from ProBalance actions by default
- InstallHelper: Fix to startup type management legacy code
- Updater: Fix quickupgrade could fail to be replaced on update in last final
- All: Compiler optimization setting adjustments
- All: Update Chinese, German, Russian
- Other minor
Process Lasso 9.3.0.30 (64-bit)
- GUI: Standardize fonts for filter edit controls
- GUI: Adopt Explorer style listviews in normal theme
- GUI: For dark mode, add dark scrollbars on listviews
- GUI: Update Chinese Simplified and Traditional, Slovenian
- Other minor changes
Process Lasso 9.3.0.22 (64-bit)
- New CPU Limiter algorithm to dynamically reduce a process’s CPU use
- Per-process CPU utilization precision now in hundredths
- Refactored SmartTrim, added ability to Purge Stand-by List
- Improved and more standard update notifications
- Arranged Options menu into categories
- Retarget all projects to VS2019 platform toolset
- Large number of other enhancements
Process Lasso 9.2.0.32 (64-bit)
- GUI: UX refactoring and tuning (details below)
- GUI: Change font of controls on main window
- GUI: Change order of rotation through color schemes when clicking on graph
- GUI: Change color of graph grid, now less prominent
- GUI: Reduce main window margins by half
- GUI: Reduce RAM load graph width
- GUI: Fix core graphs display issue when odd size logical CPU cores
- GUI: Enable core graphs display for single CPU core systems
- GUI: Improve appearance of core graphs
- GUI: Sizer (divider) control apperance improvement
- GUI: Switch to shortened Uptime format
- GUI: Fix RAM load graph could get mispositioned after manual sizing
- GUI: Improve flicker of CPU utilization and RAM load graphs on sizer control
- GUI: Move Lasso versions to right-most status bar component
- GUI: Strip embedded tabs in processor name string
- GUI: Change ‘RAM Load’ caption to ‘% RAM’
- GUI: Default panel size adjustments
- GUI: Change the methodology for panel size adjustments with main window resize
- GUI: Improve graph legend ellipsis
- GUI: Rename ‘automatic updates’ to ‘update without prompt’
- GUI: Add registry option ‘nographgrid’ to hide graph grid
- GUI: Update German and Slovenian
- GUI: Other misc changes
- Core: Change module description in version block
Process Lasso 9.2.0.14 (64-bit)
- GUI: Added Dark Mode
- GUI: Expanded custom color selections
- GUI: Improved filter edit control appearance and function, add ‘X’ clear button when populated
- GUI: Window painting and sizing optimizations
- GUI: Change default graph color
- GUI: Improved display of many message boxes
- GUI: Large number of cosmetic and control enhancements
- Assortment of fixes and enhancements
Process Lasso 9.1.0.68 (64-bit)
- GUI: If system only has a single CPU group: For default process columns, hide ‘CPU group’, Set CPU utilization bars caption to ‘CPU %’ instead of ‘CPU Group 0’
- GUI: Improvements to graph components and sizing, especially for non-English languages
- GUI: Restore ‘Governor Not Running’ warning graph overlay
- GUI: Text, menu item, and dialog cleanup and consistency improvements
- GUI: Fix issue where previously used config profile couldn’t be deleted until governor restarted
- GUI: Show automatic gaming mode in rules column
- GUI: Restore color theme when GUI launched
- GUI: Invalidate target windows after theme change
- GUI: Status bar – Remove ‘cores /’ prefix on queue length per core
- GUI: Improve process tooltip formatting, especially for non-English
- GUI: Continued prep for full dark mode
- GUI: Add Slovenian
- GUI: Other code improvements
- Core: Allow auto-detected games to be children of framework (e.g. Steam) at any level, not only immediate child
- Misc other
Process Lasso 9.1.0.42 (64-bit)
- Core: Refactored the Instance Balancer: allow for wildcards, allow for childof: to balance all children, e.g. ‘childof: boinc.exe’, re-balance if any PID in set changes, rather than net instance count change
- Core: Default to disabled process creation and termination log events
- GUI: Disable listview gridlines by default
- GUI: Add ‘View / Show gridlines’ option
- GUI: Don’t show ProBalance stats on graph if ProBalance is disabled
- GUI: Change graph overlay ‘ProBalance restraints’ to ‘ProBalance events’
- GUI: Add color selections for listview background and foreground
- GUI: Invert dark/light theme selections in preparation for dark mode
- Additional fixes and enhancements
Process Lasso 9.1.0.28 (64-bit)
- GUI: Add Processor Utility % to status bar (see this page for info)
- GUI: Add CPU Queue Length and Load Ratio to status bar (queue_length / core_count)
- GUI: Add Process Lasso version to status bar
- GUI: CTRL+C copy to clipboard support of selected rows in primary listviews (including filtered views and logviewer)
- GUI: Fix a small memory leak seen under some conditions
- GUI: Minor other improvements
- LogViewer: Persist window size and position
- LogViewer: Expand right-most log column to horizontal size of window if it would otherwise be initialized to a lesser width
- LogViewer: Move log listview column persistance to HKCU
- LogViewer: CTRL+A select all support
- Expand maximum command line length in places where an older Windows constant was used
- Migrate to VS2019
Process Lasso 9.1.0.6 (64-bit)
- Add Instance Balancer feature that assigns CPU cores to multiple instances of an application based on a specified algorithm
- Refactor Keep Awake timer functionality
- Refactor persistence of Keep Awake timer and manually induced Performance Mode when Process Lasso is restarted
- Use performance counter for total CPU utilization instead of calculation
- Change CPU topology status bar format
- Maintenance to updater for server edition
- GUI Rules column now also shows ProBalance exclusions matched by path
- Improvements to session (user) name resolution
- Fix a painting issue with actions log listview header
- Add last metric (CPU use, responsiveness, memory load.) readings to graph legend
- Add background to graph legend to enhance visibility
- Add custom color selection for graph legend background
- Change order of graph color scheme rotation on click (black, white, custom)
- Make listview painting smoother during frequent updates
- Remove a deprecated registry key in server edition
- Persistent CPU affinities configuration dialog improvements
- Pre-order status bar parts to put dynamic columns first
- Defaults: Turn on process icons in Server Edition, turn on process creation/termination logging in Workstation Edition
- Misc cosmetic work and enhancements
- Update Chinese (simplified and traditional), German, Finnish, Russian languages
Process Lasso 9.0.0.582 (64-bit)
- Default to more appropriate default log path when governor configured as a service
- Fix a rare crash seen in processlasso.exe
- Allow GUI to display more complex persistent process setting rules (pathname, command line) in listview
- Allow for smaller main window sizes to be remembered
- Minor other
Process Lasso 9.0.0.574 (64-bit)
- Dynamically size status bar parts
- Improvements to watchdog configuration dialog (confirm close without save, formatting, text)
- Restore confirmation on cancel w/o save to all configuration dialogs
- Remove minimum window height and width during resize
- Always use OS default size and width for main window, first run
Process Lasso 9.0.0.568 (64-bit)
- Add CPU type to status bar
- Make CPU topology distinct status bar item
- Continued work to processor group support
- Single-selection process context menu: Move memory priority to ‘More’ submenu
- Add processor group to CPU utilization and parking graphs caption
- Import sort behavior of listviews
- Add sort direction indicators to listview headers
- Save column states on mimimize of main window (instead of only on exit)
- Improved main window resizing
- Minor fixes and enhancements
- Assorted cosmetic and string changes
- Update Russian
Process Lasso 9.0.0.558 (64-bit)
- Add processor group (‘CPU groups’) display to indicate processor group(s) a process’s threads are running on – info
- Change to CPU core graph ordering to adhere better to NUMA node grouping
- Change to default listview ordering - NOTE: These changes will cause saved listview column ordering and sizes to be reset once
- Show ‘KB’ instead of ‘K’ in I/O Delta
- Show blank instead of 0 KB in I/O Delta
- Fix installer unicode (Chinese, Russian)
- Update to NSIS 3.04
Process Lasso 9.0.0.552 (64-bit)
- Fix issue with Hyper-Threaded/SMT avoidance current CPU affinity selection
- Fix a cosmetic resource issue in process context menu on Intel platforms
- Fix an issue where some process information could be blank
- Core process enumeration and management code maintenance
- Update copyright year
- Minor other
Process Lasso 9.0.0.548 (64-bit)
- Fix exception in 546 when a secondary instance of ProcessLasso.exe is launched directly w/o using ProcessLassoLauncher.exe
- Minor cosmetic improvement to ProBalance advanced options dialog
- Update Finnish and German languages
Process Lasso 9.0.0.546 (64-bit)
- Change log not available for this version
Process Lasso 9.0.0.538 (64-bit)
- Change log not available for this version
Process Lasso 9.0.0.526 (64-bit)
- Fix to ‘Induce Performance Mode’ (formerly ‘Classify as a High Performance’) process context menu item
- Fix digital signing of some modules in 32-bit distributions
- Minor adjustment to inter-process communication queue management
Process Lasso 9.0.0.522 (64-bit)
- Add NUMA node selections to all CPU affinity selection dialogs
- Organizational changes to process context menu
- Assortment of string, message box, and dialog improvements
- Improvements to watchdog advanced rules dialog
- Change ‘Disable SMT’ to ‘Disable Hyperthreading’ for Intel CPUs
- Change first-time minimization to system tray notification text
- Include ThreadRacer in Lasso distribution and add to Tools menu
- Add CPUEater and TestLasso support for 64-bit CPU affinities
- Fix CPUeater and TestLasso support for greater than 64 threads
- Fix Del and CTRL+A keys in filter edit box
- Increase load rate of process icons
- Remove some languages not up to date
Process Lasso 9.0.0.502 (64-bit)
- UX fixes for the 2990wx and other systems with groups of >32 cores
- Additional UX fixes and string changes
- Update DE, RU, PT-BR
Process Lasso 9.0.0.498 (64-bit)
- Some UX fixes for the 2990wx and other systems with groups of 64 cores
- Fix 2x restraint total count can occur in Insights UX
- Fix post-update revision history may on system tray icon click after notification balloon disappeared
- Update RU, PTBR, FI languages
Process Lasso 9.0.0.492 (64-bit)
- Add menu item under ‘Options / Performance Mode settings’ to uninstall/reinstall Bitsum Highest Performance power plan
- Improve watchdog dialog initial appearance
- Fix Watchdog issue with CPU affinity bitmasks > 32
- Licensing: Unbind CPU core count from unique machine ID. Requires re-activation to unbind
- Improve terminate process functionality in filtered view
- Other small fixes and enhancements
Process Lasso 9.0.0.478 (64-bit)
- Change log not available for this version
Process Lasso 9.0.0.470 (64-bit)
- Fix a GUI crash seen by a small number of users
Process Lasso 9.0.0.466 (64-bit)
- Show message box on restart after ‘Reconfigure the way Process Lasso starts’
- Restore listview header right-click to select visible columns (in addition to right-click on tab)
- Add last four digits of activation code to About Box
- Show Status column by default in All Processes view
- Fill app name and desc with process base name if can’t be retrieved
- Fix filtered processes view didn’t adopt customized columns from All Processes view
- Fixes to column setting persistence
- Fix extreme date change could cause days installed to roll over
- Fix to CPU time sort
- Fix Dark / white graph theme menu item check inversion
- Change to default column ordering in all processes listview
- Enable minidumps
Process Lasso 9.0.0.464 (64-bit)
- Show message box on restart after ‘Reconfigure the way Process Lasso starts’
- Restore listview header right-click to select visible columns (in addition to right-click on tab)
- Add last four digits of activation code to About Box
- Show Status column by default in All Processes view
- Fill app name and desc with process base name if can’t be retrieved
- Fix filtered processes view didn’t adopt customized columns from All Processes view
- Fixes to column setting persistence
- Fix extreme date change could cause days installed to roll over
- Fix to CPU time sort
- Fix Dark / white graph theme menu item check inversion
- Change to default column ordering in all processes listview
Process Lasso 9.0.0.456 (64-bit)
- Change log not available for this version
Process Lasso 9.0.0.452 (64-bit)
- GUI now allows protected processes like Easy Anti-Cheat clients to be configured for Performance Mode by adding their basename to the list, instead of throwing an error when pathname resolution fails.
- Allow process basenames to be specified (w/o wildcards) in the Performance Mode list
- Add optional command line matching to Default CPU Affinities
- Fix to governor refresh rate slider in Insights dialog
Process Lasso 9.0.0.442 (64-bit)
- Divide CPU core utilization graphs into 2 vertical stacks for additional display room
- Add some special purpose debug logging related to configuration file load disposition
- Update PTBR, Russian
Process Lasso 9.0.0.426 (64-bit)
- Fix 5 second refresh interval configuration persistence
- Update German and Chinese translations
- Other minor fixes and adjustments
Process Lasso 9.0.0.420 (64-bit)
- Fix dysfunctional ‘Notify of power plan changes’ menu item
- Hide Insights ‘Since …’ if no start time-stamp is available
- Add additional retries and increase time-out for UNC backed configuration files – to prevent their reset to default for failure to load
- Fix ‘Pro – Balance’ on advanced ProBalance dialog options
- Change name of ‘default’ profile to ‘My Default Profile’ so it is not confused with program defaults
- Import newer Italian, Polish, Russian, Finnish, Chinese Traditional, and Chinese Simplified