Virtual Serial Port Driver 歷史版本列表
更新時間：2020-05-25
更新細節：
更新時間：2020-05-12
更新細節：
What's new in this version:
Launcher:
- Aircraft can now be marked as Favourites, and filtered, making it easier to see find your favourite aircraft out of the hundreds available
- The launcher now supports aircraft carriers, including selecting a carrier and setting a start position
Graphics:
- The Compositor renderer is included as part of this release, but not enabled. It provides a fully XML-configurable multi-pass rendering pipeline that is compatible with ALS and includes clustered shading.
- A new Tower AGL view has been added. This is similar to Tower View, except that it keeps both the aircraft and the ground immediately below the aircraft in view, zooming and panning smoothly as the aircraft moves. Good for viewing landings.
- Use of non-directional point sprites as a fallback for drivers that do not support triangles of point sprites is now supported by setting /rendering/triangle-directional-lights=false.
- Regional textures for Asia, Iceland, Jan Mayen island
- Active volcanoes - Katla, Eyjafjallajokull, Surtsey
- Instanced-based random and OpenStreetMap buildings, improving performance and graphical quality significantly
- Improvements to the Wingflex Shader
JSBSim:
- [Backward compatibility breakage] Gyros are now measuring rotation rates instead of rotational accelerations. Gyros that measure rotational accelerations do not exist in the real world.
- Output properties of flight control elements are no longer tied. This saves a lot of spurious warning messages and allows direct references of the same properties among several flight controls.
- Water vapor in the atmosphere is now managed through its mass fraction rather than its partial pressure. The former being the physical quantity that is conserved when pressure and temperature vary.
- Check that there are at least 3 contacts before trying to trim on ground
- ECEF to ECI frame conversion has been moved from FGLocation to FGPropagate and FGInitialConditions since not all FGLocation need to manage that
- Gravity computations have been moved to FGInertial because it is where all the constants to compute gravity are stored. This reduces the amount of data transmitted between FGInertial and FGAccelerations.
- Added optional transmission of the simulation time for FG UDP interface
- Code cleanup and use more C++11 idioms (override, constexpr, range-based for loop, etc.)
- The existence of the property that is used for table independent vars is now checked during execution rather than when the XML definition is parsed. This relaxes the order in which filters, table and more generally flight controls need to be declared in the XML definition files.
YASim:
- Support for transonic flow effects
- Control initial gear state directly by setting /fdm/yasim/respect-external-gear-state=true, rather then YASim settings this depending on whether the aircraft is in the air or on the ground.
- Electric engines are now supported
Carriers:
- Two new standard state overlays are supported in the launcher: carrier-takeoff and carrier-approach
- A new --carrier-position command-line argument has been added. This can be used to select the aircraft start position on an aircraft carrier. Either a catapult (e.g. cat-1), a parking position (e.g. park-1), on final approach on the FLOLS (flols) or abeam the carrier (abeam).
AI:
- New AI models for the CRJ900, SR-71, Saab 340
- Updated AI models for the A-4, KA6-D, ERJ-195, CRJ-700, CRJ-200
- Updated AI traffic for Aeormar Mexico, AirDolomiti, Air Tahiti, American Eagle, China Southern, Delta Connection, Horizon Air, IcelandAir, JetBlue, LoganAir, LOT, Lufthansa, Lufthansa CityLine, MNG (Cargo), SkyUp, United Parcel Service, Ural Airlines, Uzbekistan Airways, Westjet Regional.
- Updated AI liveries for Aeormar Mexico, Airbus, Air Canada, Air Europa, Air Tahiti, American Airlines, American Eagle, Alaska, Belavia, China Southern, Gulf Air, Hop!, Icelandair, JetBlue, LoganAir, LOT, Rusline, SkyUp, South African Express, United Express, Ural Airlines, Uzbekistan Airways, Virgin Australia, Westjet,
- Space Shuttle TAEM and approach at KEDW scenario
- Accurate Britten-Norman Islander performance data, from an Islander pilot
Multiplayer:
- FGComm now supports both COM1 and COM2, as well as volume settings
- The views defined by the user's aircraft (Pilot view, Helicopter view, Tower view etc) can now be used with multiplayer aircraft. Viewing a particular multiplayer aircraft is done by clicking in the Pilot List dialogue's "view' column (see the "Multiplayer/Pilot List" menu).
- Connection to VATSIM via swift is now available via the GUI
- disable-hold-short option which allows the user to force a start on the runway when multiplayer is enabled. This option should be used with caution - it can give other pilots and ATC a nasty fright to find an aircraft materialize on the runway!
- MPCarrier can now be detected by the GUI even if not available on startup. To enable this feature set /sim/mp-carriers/auto-attach=true
Nasal Scripting:
- Garbage collection improvements to reduce frame stuttering
- Re-loadable nasal modules
- Canvas EFIS framework
Canvas:
- Three new methods in Canvas Image to set colors of pixels in the image
Aircraft:
- Boeing 777
- Douglas A-26-Invader
- Airbus A320
- Antonov AN-24
- Diamond DA40 NG G1000
- Robin DR400 Ecoflyer
- General Dynamics F-16
- Piper J3 Cub
- Saab JA37 Viggen
- Piper PA 28 Cherokee
- Bombardier Q400
- Ryan Navion
- Space Shuttle
- Cirrus SR22
- Yak 52
- Miscellaneous
- Increased turbulence will be encountered near active volcanoes
- Configurable METAR URL
- METAR strings are decoded and displayed in a human-readable form in the weather dialog
- Polish translations of the UI are now available
- Improved Chinese translations for the launcher
- Improve glider vario instrument
更新時間：2020-04-02
更新細節：
更新時間：2019-09-01
更新細節：
更新時間：2019-05-31
更新細節：
What's new in this version:
WYSIWYG Web Builder 14.4
- Fixed: Layout grid padding issue in breakpoints when using CSS Grid mode.
- Fixed: Issue with validation bubble and slide animation.
- Fixed: Crash when using tables in Embedded Page with breakpoints.
- Fixed: Icon colors not saved for Themeable Button.
- Improved: Added background repeat, background-size and background alignment options to Dialog object.
- Improved: Accordion and Tab high DPI improvements.
- Improved: Animation Timeline high DPI improvements.
- Improved: Scrollbar rendering of elements is now DPI aware.
- Improved: Added exception handling (try/catch) to the built-in form processor script to avoid uncaught errors. Thanks to Martin!
- Updated PHP Mailer to version 6.0.7
- Updated jQuery to version 3.4.1
- Updated Google Font list to latest. With approx. 100 new fonts
WYSIWYG Web Builder 14.3.4
- Fixed: Incorrect flexbox offset calculation for multi-line rows
- Fixed: Crash when updating master page in multi-page properties
- Fixed: Crash when modifying font in styles
- Improved: Ready-to-use-JavaScript preview is now DPI aware
- Improved: Spell checker via F7 makes sure first text object gets focus
- Improved: Added style support to Flex Container form
- Improved: Logout button full width behavior in layout grids with breakpoints
WYSIWYG Web Builder 14.3.3
- Fixed: Issue with Page Footer breakpoints when used in a master page
- Improved: Blog rendering at High DPI
- Improved: Google font included in inline frame Site Search results
- Improved: Global replace now can find/replace text in Heading objects
- Improved: Optimized memory usage of RSS Feed (for larger projects)
- Improved: Card divider rendering
- Improved: z-order of navigation buttons in Bootstrap Carouse
- Improved: Rollover image and Rollover text behavior in flexbox container
WYSIWYG Web Builder 14.3.2
- Change log not available for this version
WYSIWYG Web Builder 14.3.1
- Fixed: Duplicated hidden form fields in flex container
- Improved: Font size in Object HTML/Page HTML is now DPI aware
- Improved: Alpha slider rendering in color picker with High DPI
- Improved: Navigation bar image scaling is now DPI aware
- Improved: Added support for OverlayMenu in master pages
- Improved: The Flex Grid editor now indicates when you are typing a duplicated name, to prevent property merging
- Improved: Implemented several performance improvements for generating HTML from text
WYSIWYG Web Builder 14.3
- Change log not available for this version
WYSIWYG Web Builder 14.2.2
Fixed:
- Incorrect warning in Error Reports for master page with events
Improved:
- Alignment of small shapes
- Form now removes leading and trailing spaces from email address to prevent validation error
- Added z-index to flex container with image overlay
- Select below/above now include objects with 0 pixel offset (instead of 1)
- (drawing) Line offset is now longer affected by default page font-size
- Margin issue in floating layer in workspace
WYSIWYG Web Builder 14.2.1
- Fixed: Accordion content padding cannot be changed via property dialog
- Fixed: Crash when adding more than 12 cells in jQuery Mobile Layout Grid
- Fixed: z-index problem when using image-overlay in Flexbox Container
- Fixed: Automatic @font-face always uses verdana font (64bit version only)
- Improved: An improved messagebox is displayed when an extension is missing. You can now choose to continue, visit the forum FAQ for tips how to fix the error or cancel
- Improved: Added Google Fonts to Menubar->Tools
- New feature: Added 'Full width' option to Rollover text for use with layout grids. This makes the image flexible/responsive
WYSIWYG Web Builder 14.2.0
- Fixed: Switching from Master Page to Master frame crashes program when the page is not active
- Fixed: Issue with Panel Menu hamburger image in breakpoints
- Fixed: Visibility issue with images in flexgrid and breakpoints
- Fixed: Login Name does not apply background alpha value
- Fixed: Panel Layer overlay hidden in breakpoints
- Improved: Added justify-content to Layout Grid when using flexbox/fixed height
- Improved: It is now possible to use multipe (form) conditions with the same value for "equal to (choice)/not equal to (choice)", so you can trigger different actions for the same value
- Improved: Now includes PHP Mailer 6.0.5 (upgraded from 5.2.26) with many improvements angelog.md
- Improved: Implemented workaround for 'Failed to open document' error when extensions are missing
- Improved: Projects with extensions can now be opened in the TRIAL version. Extensions will not be functional in demo mode but the application will no longer generate an error (or crash)
- Improved: Form's encoding type defaults to 'multipart/form-data'
- Improved: Newly added objects in layers will automatically be moved into the viewport if they are not visible in breakpoints (experimental)
Single Page Protect:
- Improved: Redesigned 'Single Page Protect' so it's more mobile friendly
- New feature: Added extra styling options to 'Single Page Protect': colors, padding, border-radius, button and editbox styling etc.
Quick 'n Easy Web Builder 6.x export:
- New feature: Added support for export to Quick 'n Easy Web Builder 6.x format
Variables:
- New feature: Added 3 new built-in variables: $PAGE_NAME$, $PAGE_TITLE$ andf $PAGE_FILENAME$. These variables can be used anywhere in the page and will be replaced by their actual values when the page is published
List View:
- New feature: Added alignment property to List View. The alignment is responsive
Slide Menu:
- New feature: Added alignment property to Slide Menu. The alignment is responsive
Cards:
- New feature: Added the ability to add YouTube/Vimeo videos to Cards
- New feature: Added 'Icon library' option to Card, this makes it possible to use custom fonts (in addition to Font Awesome)
Panel Menu:
- New feature: Added the ability to set different colors for the button and menu items in Panel Menu
Navigation:
- New feature: Responsive Menu, Breadcrumb, Tabs, Overlay Menu and Panel Menu now support custom icon fonts (in addition to Font Awesome and Material Icons)
WYSIWYG Web Builder 14.1.1
- Fixed Issue with Card alignment in breakpoints
- Fixed CSS menu border hover color
- Fixed Issue with progress bar percentages in floating layout
- Fixed Issue with empty Marquee and HTML formatting tools
- Improved Hidden Inline Frame now uses 'displaynone' instead of 'visibilityhidden' in Layout Grids
WYSIWYG Web Builder 14.1.0
- Fixed: Extra quote in Overlay Menu
- Fixed: Line position in floating layers.
- Fixed: Issue with Replace ID 1234xxxxx to a1234xxxxx
- Improved: Added flexbox support to CMS View
- Improved: 'Login Name' no longer shows a broken image when the avatar is not set
- Improved: Rendering speed of layer/layout grid 'ondragover' highlighting
- Improved: Implemented responsive text alignment for Heading, Editbox, Text Area and Label
- Improved: Implemented responsive menu alignment for CSS menu, Breadcrumb, Pagination, Text menu, Overlay Menu and Responsive Menu
- New feature: Added the possibility to set the maximum dimensions of the avatar image in login signup
- New feature: Added alpha support to CSS Menu border color (menu items)
- New feature: Added 'alignment' property to Pagination menu
- New feature: Added 'border width' property to Themeable Button
- New feature: Added hard line-break support to Card text
- New feature: Added 'full width' option to Horizontal Line. When set to false, the line can have a fixed width (instead of 100%)
- New feature: Added 'box shadow' to Heading object
- New feature: Added 'text shadow' to Heading object
- New feature: Added 'padding' to rollover layer (for use with floating children)
- New feature: Added the ability to add custom options to full page Carousel. For an overview of available options please visit: https://github.com/alvarotrigo/fullPage.js/#fullpagejs
- New feature: Added background overlay options to Flex Grid
- New feature: Added the ability to use the Flex grid as a form (Properties->Form->Enable Form)
- New feature: Added 'Default breakpoint' template in Flex Grid editor. This option will apply the layout from the default breakpoint to the current breakpoint, so you do not have to redo it for all breakpoints
WYSIWYG Web Builder 14.0.5
- Fixed: Font sizes in extension datasets are not converted to pixels
- Fixed: Issue with edit profile/avatar and minified HTML
- Fixed: Structured Data Object Adds Scrollba
- Fixed: Cannot insert new item in empty card item list
- Improved: Added confirmation box to 'Reset toolbox'
- Improved: Reversed the order of @font-face fonts (woff2, woff, tff, svg, eot
- Improved: Sticky Layer now uses CSS instead of JavaScript when delay is set to
- Improved: Added 'mute=1' to YouTube and Vimeo background video
- Improved: Added latitude/longitude properties to 'Google Maps with Info' script
WYSIWYG Web Builder 14.0.4
- Removed: input:-webkit-appearance, hides checkboxes in with non-safari browsers
- Fixed: 'Select Page' dialog should be on the foreground in nested dialogs
- Fixed: Combobox height issue in breakpoints
- Fixed: Layout grid column border rendering issue
- Fixed: Overlay menu styling crashes WWB
- Fixed: missing semicolumn in label line-height
- Fixed: Conflict with flexible carousel and 'center in browser'
- Improved: Overflow of panel layer
- Improved: Optimized layout calculation when switching between breakpoints
- Improved: Initial 'Horizontal Line' height is set to grid size, when using drag & drop from toolbox
- Improved: Modal Layer positioning in breakpoints
- Improved: Font size update in toolbar
- Improved: Flex Grid editor now displays a warning if one of the grid item names is invalid
WYSIWYG Web Builder 14.0.3
- Fixed: Login Admin Action icon's not showing
- Fixed: Issue with jQuery Mobile Panel corner property.
- Fixed: Issue with jQuery Mobile Header/Footer text color.
- Fixed: Incorrect date styling in blog templates bootstrap and testimonial.
- Fixed: Some styles are not saved for jQuery UI widgets when using breakpoints.
- Fixed: CSS menu is not synchronized with other menus.
- Fixed: Box-shadow type setting is not saved.
- Improved: Editbox line-height is now responsive.
- Improved: Long label text wraps in layout grid.
- Improved: The page size is no longer updated automatically when editing text inside a footer.
- Improved: Ruler update after page size change.
- Improved: Removed YouTube's ugly border.
- Improved: Included jquery-2.2.4.min.js again for backwards compatibility.
- Improved: 32bit version can now read most projects saved with 64 version
WYSIWYG Web Builder 14.0.2
Fixed:
- Login Admin code missing semicolon when using avatars
- Issue with Material Icons json file
- Ctrl+Click does not work for Tables and Carousel
- Folder should not be included in Twitter Card URL
Improved:
- Added 'User role' property to Login Signup form. This specifies the default user role for new users
- Added keyboard shortcut support to search input fields of the Object Manager, Site Manager and Toolbox
WYSIWYG Web Builder 14.0.1
Fixed:
- Missing 'width' in Bulleted List
- Rendering issue with zoomed workspace
- Conflict with external scripts and schema.org JSON
- 'Find not found' error with some extensions
- Implemented workaround for Layout grids with maximum width, so they use 'old' behavior automatically. See the help for more details
- Login Admin produces demo code
- Single character glyphs in Icon Fonts do not render
- Issue with user roles in Login Admin
Improved:
- SVG output for Material Icons.
- During the setup, blocks/icons will no longer be installed in the user's document folder. Because when the setup is executed with different credentials, the files ended up in the wrong folder
- Added support for Unicode files names in zip backup
- class property does not disable object's CSS output
New feature:
- Added 'trigger change' action to Form Conditions. When you set the value of another object via conditions, then browsers will not trigger a change event for that object. This action adds the ability to force a change event, which may be useful if the value is used in other conditions
WYSIWYG Web Builder 14.0.0
Flex Grid:
- New feature: WB14 introduces a new way of creating flexible layouts based on the new CSS Grid Layout
- The CSS grid is a new technique in CSS that allows web developers to create complex responsive web design layouts more easily and consistently across browsers. 'CSS Grid Layout' is a two-dimensional grid system that is native to CSS. It does not rely on floats or other hacks. This result in clean code and reliable code. The idea behind the Grid Layout is to divide a webpage into columns and rows. The columns and rows have named areas where you can drag & drop object in. The definition of the layout can be different for each breakpoint. Each grid area supports it own padding, (flexbox) alignment, border and background style
Cards:
- New feature: Added 'Card' object. A card is a lightweight, flexible content container. It includes options for headers and footers, a wide variety of content, styling, and powerful display options. When used in combination with a flexbox container, multiple cards with different content can have the same height, which normally would be difficult to achieve.
- New feature: Popovers, this basically uses the Card as an advanced tooltip/pop-up box that appears when the user clicks or hovers on an element
Google Fonts:
- New feature: Added Google Fonts Manager. Adding Google Fonts to your website has never been easier. You no longer have to manually download/install the fonts from the Google website.
Icons Fonts:
- New feature: Added support for custom Icon Fonts Libraries. Add your own icon libraries or third party icon sets. Extra Icon Fonts support the same styling options as the built-in Font Awesome. Add-on packs are available for : Drip Icons, Elusive Icons, Feather, Foundation Icons, Glyphicons Halflings, Ionicons, LineAwesome, Material Icons, Open Iconic, Linea Icons
Structured Data (schema.org):
- New feature: Added support for Structured Data (JSON-LD). Provide a better browsing experience for users on your website and in search engines, and improve your SEO with the built-in JSON-LD generator. The following schemes are currently supported: Event, Review, Person, NewsArticle, SoftwareApplication, Product, Organization, Recipe, Restaurant, VideoObject, MusicAlbum, MusicPlaylist.
Twitter Cards:
- New feature: Added support for Twitter Cards: Summary, Summary with large image and Player. Twitter specific meta tags can be configured in the Meta Tags section of the Page Properties
Layout Grid:
- New feature: Added background overlay support to grid columns
- New feature: Added semantic HTML5 tag support
- New feature: Adding padding properties to columns. Padding is responsive
- New feature: Adding border properties to columns. This make it possible to configure border for each column. Border properties are responsive
- New feature: Added the ability to make layout grids full screen: Column height->100vh (100% of the viewport height)
- New feature: Added support for 'CSS Grid Layout' (in addition to Bootstrap and Flexbox)
Wizard:
- New feature: Added new 'Wizard' object. This implements a wizard like component, which can be used (for example) to create a multi-page form. The wizard can either be modal (popup) or used as a standard element
Site Search:
- Improved: Most search related code is now part of wb.sitesearch.min.js, this makes it possible to share the code between multiple page and results in a smaller footprint
- Improved: Results font-family now supports @font-face/Google Fonts
- New feature: Added 'Include all text in search index' option in Search Index settings. This will use all text from the page instead of just unique words. This will increase the size of the search index, but the search results will look better and it makes it possible to search for phrases
- New feature: Added the possibility to use quotes in the search queries to search for an exact phrase. Example: 'open source'. To make this useful, the option 'Include all text in search index' should be enabled
- New feature: Added the possibility to use the minus character before a word to exclude all results that include that word. Example: web -designer
- New feature: Added 'Include timing' option. This displays the total time it took to execute the search query
- New feature: In addition to jQuery Dialog, you can now also display the results in a Bootstrap modal
- New feature: Added an option to set maximum number of characters to display in the results. The description text contains the context of the keyword within the text
- New feature: Added support for pagination
- New feature: Added item padding property. This specifies the padding between result items
- New feature: Added option to make search terms bold
- New feature: Added option to include the URL in search results
Overlay Menu:
- New feature: Added new 'Overlay Menu' object. This implements a multi-level, responsive full screen menu. With 10 show/hide animations. social icons support
Tab Menu:
- New feature: Added responsive mode. When the viewport gets smaller than the specified breakpoint value, the Tab Menu will switch to stacked (vertical) mode so it can be also be used on smaller screens
Text Menu:
- New feature: Added responsive mode. This works in combination with Layout->Type->Responsive. When the viewport gets smaller than the specified breakpoint value, the Text Menu will switch from horizontal to vertical
Panel Menu:
- New feature: Added responsive mode. When the viewport gets smaller than the specified breakpoint value, the Panel Menu will switch to full screen mode (with close button)
- New feature: Added 'hamburger animations'. 12 different animations are available
- New feature: Added the possibility to add footer text. For example, to add a copyright message at the bottom of the menu
- New feature: Added the possibility to add a logo to the menu
- New feature: Added menu padding. This sets the padding around the entire menu
- New feature: Added support for 'Social Icons'. To add a social icon set the of the menu item and leave the 'text' field empty
- New feature: Added support for dividers. Set the text to '---' to insert a divider
Mega Menu:
- New feature: Added responsive mode. When the viewport gets smaller than the specified breakpoint value, the Mega Menu will display a hamburger icon to trigger a full screen menu
- New feature: Added 'Alignment' property. This adds the possibility to align the button inside the menu's container
- New feature: Added sub menu 'Alignment' property. Specifies the alignment of the text inside the sub menu
- New feature: Added sub menu 'Orientation' property. Specifies the orientation of the sub menu relatively to the button
CSS Menu:
- New feature: Border styles of the main menu now support for individual sides
Other navigation:
- Improved: You can now use
in menu text, which makes it possible to have multi-line text. Note that this mainly useful for menu items that do not have the same size like sub menu, panel/overlay menu items
- New feature: Added 'Synchronize with another menu" option. Enabling this option will synchronize the links of the menu with the specified menu, This may be useful when you have multiple menus on the page, for example a desktop and mobile menu. So, you will have to change the link(s) only once
- New feature: Added 'Do not follow this link' option to links. Enabling this option adds 'rel=nofollow' to prevent robots/search engines following the link
Master Page/Master Frame:
- New feature: Added support for background transparency (alpha) in Content Place Holder
- New feature: Added new master page functionality. In addition to Master Frame you can now also use another page as master page. This does not require a content place holder
General:
- Removed: Disable IE toolbar. IE no longer supports this feature
- Improved: All built-in JavaScript files are now loaded from the 'js' sub folder instead of embedded in the executable. This reduced the size of the application and memory usage. And it makes it easier to replace the files, if needed
- Improved: More objects now support ARIA role attributes. For example: tabs, accordion, search, blog, news feed ticker, navigation etc.
- Improved: The 'margin' property is now responsive for most objects
- Improved: If a full width object has margin then the margin value will be subtracted from the total width using css's calc function so the object does not become wider than its container
- Improved: Removed browser prefixes for box-shadow
- Improved: HTML viewer has a better contrast for dark color schemes
- Improved: Many DPI improvements. For example, all built-in images/icons/toolbars now have high resolution versions for use on high DPI screens
- New feature: Added 'Set initial zoom level based on DPI scaling' option. On some computers with a high resolution (4k) display, the initial workspace may be to small. By enabling this option, the DPI value of your system will be used as the initial zoom level
- New feature: Added 'Default' accent color to color schemes. VS 2017 and Office 2016 color schemes may use Windows accent color now
- New feature: Added 'Search' option to Site Manager to filter pages in the list and quickly find a page
- New feature: Added 'Search' option to Page selection dialog (for internal links) to quickly find a page
- New feature: Added 'Project backup in zip' option to File menu. This will create a full backup of the project and images etc.
- New feature: Added 'Load built-in JavaScript files asynchronously' option in Tools->Options->HTML. Note: only useful when using external JavaScript file
- New feature: Added 'ctrl+click+drag' support to quickly duplicate objects just like in Word/PowerPoint: select the object that you want to duplicate
- hover over the object with your mouse and press the CTRL key
- while still pressing the CTRL key, click and drag the object to the new location
Publish:
- New feature: Make a backup of the complete project (including images) in zip format
Templates/Blocks:
- Improved: Templates/Blocks are now stored more efficiently. If a project uses the same image multiple times then it wil be embedded only once
SVG:
- New feature: The application now officially supports SVG
Shape:
- New feature: Add ‘Full width’ mode to Shape, Text Art and Clip Art for use with SVG output mode. This makes it possible to have scalable/flexible shapes/text/clipart in layout grids
- Improved: Shapes in 'Insert Shape' gallery are now rendered larger and sharper, just like other 'Insert' galleries
Color picker:
- New feature: Added 'Alpha slider' to color picker
Font Awesome/Material Icons:
- New feature: Implemented a new icon selection window. With categories (just like in the Ribbon) and a search option, so you can quickly find the icon you are looking for
Page:
- New feature: Added 'Disable CSS media query' option to Page Properties. If this option is enabled, then breakpoints will not be published. This may be useful for testing purposes
- New feature: Added 'Disable HTML/CSS/JavsaScript formatting'. This option disables beautify/minify options for the current page. This may be useful for testing purposes or when you have added code to the page which does not support formatting
- New feature: Added 'Disable custom code'. If this option is enabled, then custom code with not be included in the published page. This way you can test the page without custom code (for example, in case something does not work)
- New feature: Added 'Use Safari mobile background fix'. This option implements a workaround for issues with full width (parallax/fixed/cover) background images on Safari mobile (iOS) browsers
- New feature: Added 'Apply these breakpoints to other page' in Manage breakpoints. This option applies the breakpoints to other pages (if they do not already exist). Note that this does not affect the layout
Text:
- New feature: Added 'ID' property in Advanced section of Link properties. This makes it possible to create bookmarks to links. Related tutorial: How to create bookmarks in Text? + style => no-pointer
- New feature: Added 'Font Family' and 'Font Size' to property dialog and Property Grid. This can be used to set the font of the text object when using responsive fonts
- New feature: Added 'Recently Used Fonts' to the font dropdown list in the Ribbon and Format toolbar
Blog / Article:
- Improved: Added the ability to change the editor color. This can be useful if you are using white text
- New feature: Added 'bootstrap' layout template
- New feature: Added 'clean' layout template
- New feature: Added 'testimonial' layout template
- New feature: Added ‘quote’ layout template
News Feed Ticker:
- New feature: Added support for background transparency (alpha)
- New feature: Added border radius option
Ready-to-use-JavaScript:
- Improved: Google Maps scripts now display a preview image in the workspace (instead of the generic JavaScript logo)
- Improved: Text scripts now show a preview of the text in the workspace
- Improved: Added support for Google Fonts
- Improved: Added support for Global Replace (fonts and colors)
- New feature: Added ‘Countdown Days’ script
- New feature: Added ‘Typewriter’ and ‘Typewriter Deluxe’ scripts. The typewriter scripts simulate typing text. Typewriter Deluxe also includes a cursor and reverse mode
Style Manager:
- Improved: The Style Manager window is now resizable
- Improved: pseudo classes are no longer displayed in the style selection list, because it is only useful to select the main class anyway
- Improved: 'Import' and 'Advanced' parser updated. It now recognizes rgba() values, animations, transitions, cursors, border-radius and more
- Improved: Enabled 'predefined style' for Heading, Bullets, Layout grid, Flex Container, Rollover Layer
- New feature: Most objects now have a 'class' property in the Property Inspector. This adds the ability (for advanced users) to set the classname (style) for any object, note that this may not make sense for some objects
- New feature: Border styles now support for individual sides
- New feature: Added support for background gradients in styles
- New feature: Added support for the 'cursor' property. This specifies the type of cursor to be displayed when pointing on an element
- New feature: Added support for the 'background-clip' property. This specifies the painting area of the background. This can be useful in combination with transparent borders
'border-box' clips the background to the border box. When using a transparent border, the background will be visible behind the border. 'padding-box' clips the background to the padding box (excluding the border). The background behind the border will be transparent
CSS3 Animations:
- Improved: When using onscrollreveal events with css animate (css), then the target object will be initially hidden automatically (via class 'visibility-hidden'). This behavior can be overwritten by adding $SCROLLREVEAL_AUTOHIDE$ -> false to the user defined variables
- New feature: Added animations preview
- New feature: Added support for ‘filter’ property in transitions and CSS animations. This adds the possibility to animate brightness, contrast, hue, blur, invert, saturate, grayscale and sepia
- New feature: Added 'Neon' text animation
- New feature: Added 'Fire' text animation
- New feature: Added 'Classic Movie' text animation
- New feature: Added 'transform-wobble-top', ‘transform-wobble-center’ and ‘transform-wobble-bottom’ animations
- New feature: Added several text letterspacing animations. For example: ‘letterspacing focus in’ and ‘letterspacing expand’. Plus, more than 25 other new animations, including: animate-border-fade, background position, focus-in / focus-out, jello, ken-burns, pop, push, shadow-top-bottom / shadow-left-right, slide-in-elliptic/ slide-out-elliptic, text-popup, transform diagonal and many others
Flexbox:
- New feature: Added 'background image+overlay' support to Flex Container
- New feature: Flexbox properties (flex grow, flex shrink, align self, flex basis) of objects are now responsive, so you can use different values in breakpoints
Photo Gallery/Photo Collage:
- New feature: When loading new images, the gallery will automatically use the meta data of the image (if available)
- New feature: Added the ability to set a separate 'Thumbnail' image. This allows you to use a different (smaller) version of the image for thumbnails. It is also still possible to automatically generate a thumbnail image. This can be useful for example if you want a use a square image for the preview and the full sized image with normal aspect ratio
- New feature: Added support for Bootstrap modal in jQuery Dialog settings. This implements a responsive modal popup
- New feature: Added the ability to get images from a folder on the server. If the images contain description meta data then this will automatically be used for the title
Slideshow:
- New feature: When loading new images, the gallery will automatically use the meta data of the image (if available)
- New feature: Added 'Line' shape option to pagination, inspired by Bootstrap-4 Carousel indicators
- New feature: Added new built-in navigation arrows, inspired by Bootstrap-4 Carousel arrows. To use the new arrows, enter '<' for previous and '>' for next in the filename fields
- New feature: Added ‘Maximum width’ property which limits the width of the slide show when used in full width (floating) mode. In previous versions this was fixed to 1920
- New feature: Added the ability to get images from a folder on the server
- New feature: Added ‘Full screen background’ slideshow mode. The images will cover the entire viewport. The slideshow will be fixed at the background, so it will not scroll with the rest of the content. Full screen background uses CSS3 animations, no JavaScript
Image / Picture:
- New feature: Added ‘Object-fit’ property. Specifies how the image should be resized to fit its container. Requires a modern browser! For example, Internet Explorer does not support this property
Progressbar:
- New feature: Added the ability to show percentages in the progressbar
Dialog:
- New feature: Added border width property
- New feature: Added box-shadow properties
- New feature: Added animation duration and easing properties
- New feature: Added 'Bootstrap' mode. This will use Bootstrap's modal instead of jQuery UI
- New feature: Added the ability to use the dialog as a form (Properties->Form->Enable Form)
- New feature: Added floating mode. When this option is enabled objects inside the dialog float instead of having a fixed position, so you can create flexible layouts
- New feature: Added 'Breakpoint' property. When the viewport gets smaller than the specified breakpoint value, the dialog will switch to full width mode. For use with floating mode
- New feature: Added 'Buttons' properties. Buttons will be added at the bottom of the dialog and can be used to close the dialog or trigger other actions (events). This feature replaces the previous hardcoded button options
- New feature: Added 'Button alignment' and 'Button margin' properties. These specify the alignment and margins of the buttons in the footer of dialog
- New feature: Added the ability to customize the style of the buttons
Tabs:
- New feature: Added show and hide animations. This animates showing/hiding the panels
- New feature: Added the possibility to add a description and icon (fontawesome/material icon) to tabs
- New feature: Added support for vertical tabs: Tabs at the left and Tabs at the right
- New feature: Added the ability to use the Tabs object as a form (Properties->Form->Enable Form)
Accordion:
- New feature: Added the ability to use the accordion as a form (Properties->Form->Enable Form)
Themable Button (previous known as jQueryButton):
- New feature: Added box-shadow property
- New feature: Added the ability to set the button(s) full width in Layout grid. This may be useful (for example) to create flexible (radio) button rows
Spinner:
- New feature: Added box-shadow property
Events:
- New feature: Added 'Form Submit' and 'Form Reset' actions to events. These actions can be used to submit or reset a form through events! For example, to submit a form via a button that is not part of the form
- New feature: Added 'ondocumentready' to page events. This event is will be triggered once the page Document Object Model (DOM) is ready for JavaScript code to execute. This can be useful for example, to apply a style to an object
Scroll Events and Transitions:
- New feature: Added 'Disable scroll events on small screens' to the Page Properties. This option adds the ability to disable scroll events on small screens (eg. phones)
- New feature: Added 'Disable scroll transitions on small screens' to the Page Properties. This option adds the ability to disable scroll transitions on small screens (eg. phones)
'Minimum width' specifies the width at which the scroll events/ transitions will be disabled
- New feature: Added 'Exclude browsers' to the Page Properties. This option adds the ability to disable scroll events and transitions on specific browsers (eg. iOS, Android)
Signup/Edit Profile:
- New feature: Added the ability for the user to set an avatar image. The image can be displayed on the page with the "Login Name' object
Login Name:
- New feature: Added border, background, padding, vertical alignment properties
- New feature: Added 'Display Avatar' option. This will display the avatar of the logged in user
Login Tools:
- New feature: Added support for background and border transparency (alpha)
- New feature: Added 'User Roles' functionality. Users roles are used to create different types of users. These users will only have access to the pages that have configure this role. The roles are customizable in the properties of the Login admin
Login Admin:
- New feature: Redesigned the layout of the Login Admin for a modern look and feel
- New feature: Added styling options for button and input fields
- New feature: Added support for striped and hover rows
- New feature: Added the ability to customize/translate the text of the various items (headers, buttons)
- New feature: Added table cell padding
- New feature: Added search/filter option
- New feature: Added pagination
- New feature: Added 'avatar' support (see 'Signup/Edit Profile)
Borders:
- Improved: Borders are now rendered with all properties (style, radius, individual borders) in the workspace
- New feature: Added support for transparent borders (alpha)
Background:
- New Feature: Added support for Google Maps background rendering. You can now use a (static) Google Map image as background in most objects
- Improved: Background mode -> image now displays the color picker to select the color for image + color and image + overlay
- New feature: Added ‘image+fade’ option in background properties. This will add a fading gradient overlay effect to the background
Box Shadow:
- New feature: Added support for shadow type: inset. This changes the shadow from an outer shadow (outset) to an inner shadow
Carousel:
- New feature: Added 'Line' shape option to pagination, inspired by Bootstrap-4 Carousel indicators
- New feature: Added new built-in navigation arrows, inspired by Bootstrap-4 Carousel arrows. To use the new arrows, enter '<' for previous and '>' for next in the filename fields
- New feature: Added 'Flexible' mode. When this option is selected the child elements of the Carousel will be floating (instead of fixed). In this case the Carousel will be fully responsive and it can also be used inside layout grids. In 'Flexible mode' the Carousel can also be set to use the full height of the viewport
Layer:
- New feature: Added 'breakpoint' property to Panel Layer. When the viewport is smaller than the specified breakpoint value, the panel layer will become full width
CMS Admin:
- Improved: WWB editor has new icons
- New feature: Added styling options for button and input fields. All plug-ins have been updated to support the new styling
- New feature: Added support for hover rows
- New feature: Added table cell padding
ListView:
- New feature: Added the possibility to add images to dividers
Property Inspector:
- New feature: The Property Inspector will display a 'Responsive' icon, if the property has different values in breakpoints
- New feature: Added 'Reset Property (RWD)'. This will reset the selected value, so will be the same across all breakpoints
- New feature: Added 'Reset All Properties (RWD)'. This will reset all responsive values of the object
- New feature: Added commands section with shortcuts to 'More properties', Events, HTML and Animations
Global Replace:
- New feature: Added the ability to replace internal links
Error Reports:
- New feature: Error Reports displays a warning when a style does not have the same breakpoints as the page. If you are using styles in responsive pages then these styles should have the same breakpoints
- New feature: Error Reports displays a warning when an event refers to an object that is no longer on the page: Invalid event target
Form Conditions:
- New feature: Added 'Less than' and 'Greater than' conditions. It is also possible to create a range (greater than/less than combined)
- New feature: Added 'else' conditions. This can be used in combination with 'equal to', 'not equal to', 'greater than' and 'less than'
Form:
- New feature: Added 'From' property to built-in form processor settings. This will set the 'from' address of email sent messages to the specified email address. If you leave the field empty then it will work like in previous versions: either the 'email' input will be used (if it exists) or the 'to' address
- New feature: Added 'Set envelope-from address for PHP mail() with the -f option' in form properties (Form Properties->Advanced->Miscellaneous). This replaces the PHP7 option in page properties. It serves the same purpose
- New feature: Added server sided input validation (Form Properties->Advanced->Miscellaneous). This adds extra security to the form by also validating the input on the server side (using PHP). This feature uses the same settings as the JavaScript (client side) validation
Editbox / Textarea:
- New feature: Added the possibility to set the color of the placeholder text
Lightboxes:
- Improved: Lightbox preview image now automatically keeps aspect ratio of the image
- New feature: Added the possibility to use fancybox v3. Due to license restrictions we are not allowed to distribute fancybox v3. However if you copy the files from https://fancyapps.com/fancybox/3/ to DocumentsWYSIWYG Web Buildersystemlightboxfancybox, then application will use these files instead of the included ones (fancybox v1)
- New feature: Added support for 3 new (third party) responsive lightboxes: lightcase, tosrus, venobox. Available in 'Free extras'
- New feature: The lightbox (in Page Properties) now supports : colorbox, lightcase, prettyphoto, swipebox, tosrus, venobox. These lightboxes can be used for YouTube, Vimeo, HTML5 video, Inline frames and links
- New feature: Added the ability to add a border (style, color, width, radius) to the lightbox preview image in YouTube, Vimeo and HTML5 video
User defined variables:
- New feature: Added $PROJECT_CSS$ system variable. This makes it possible to specify a different name for the global (external) style sheet, instead of using the project name
更新時間：2019-05-25
更新細節：
What's new in this version:
Virtual Serial Port Driver 9.0 Build 9.0.575
- Change log not available for this version
Virtual Serial Port Driver 9.0 Build 9.0.572
- Change log not available for this version
Virtual Serial Port Driver 9.0 Build 9.0.567
- Added: Windows Server 2016 support
- Added: full Windows 10 support
- Improved: new software protection system
- Improved: GUI compatibility with high-resolution monitors
- Improved: displaying a more detailed information about the virtual serial ports in the device manager
- Improved: drivers are digitally signed with WHQL
- Improved: the ports are marked as occupied to the system, which prevents them from being overlapped (e.g. by USB to serial driver)
- Improved: the information about created virtual ports is removed after the application uninstallation
- Fixed: displaying of the newly created virtual ports in the device manager
- Fixed: timeouts processing during the read operation
- Fixed: flow control displaying when a serial port was opened by HyperTerminal
Virtual Serial Port Driver 8.0 Build 8.0.412
- Added: possibility to create ports for the current user session only. Allows RDP users to create port with the same name (e.g. COM1) in each user session.
- Added: you can enable automatic update of ports' list, thus you can see pairs created in other user sessions
- Improved: instantaneous ports creation lets working with them even before PnP manager detects the newly added ports
- Improved: ports can be deleted even if they are open by other applications
- Fixed: loopback pinout wouldn't save for a ports pair after the system reboot
- Fixed several issues: canceling IRP and timeout Read/Write operations
Virtual Serial Port Driver 7.2 Build 7.2.308
- Added: 64-bit version of Virtual Serial Port Driver library for creating 64-bit applications
- Added: Java code sample in the OEM build
- Improved: overall application stability
- Fixed: BSOD when serial port was opened by Ham Radio Deluxe software
- Fixed: BSOD when trying to cancel IOCTL_SERIAL_GET_WAIT_MASK request
- Fixed: BSOD when trying to cancel Read call
- Fixed: BSOD caused by low timeout value used with write requests accompanied by high system load
- Fixed: several BSOD cases, including those caused by timeout requests and attempts to cancel all read, write and ioctl calls
Virtual Serial Port Driver 7.0.1.263
- Added: full Windows 7 support
- Added: signal lines pinout scheme while customizing pinouts
- Added: detection of the application virtual serial port was created with
- Added: program uninstaller verifies that Virtual Serial Port Driver is not launched
- Added: application restart is not required after entering registration info
- Added: virtual serial port pairs, created by Virtual Serial Port Driver, are removed after the program uninstallation
- Improved: Virtual Serial Port Driver and all of its internal drivers stability
- Fixed: BSOD when virtual serial port is opened with strict baud rate value less than 8 Bd
- Fixed: BSOD when virtual serial port, created by VSPD on a real machine, was used by a virtual machine as physical real port
- Fixed: data distortion during transmission on multicore systems
- Fixed: bug with granting port access to an application
- Fixed: data loss during simultaneous data transmission from both ports with "Xon/Xoff" option enabled
- Fixed: freezing of application, which opened virtual serial port created by VSPD, if RTS_CONTROL_TOGGLE parameter was enabled
- Fixed: multicore system freezing during data transmission with Xon/Xoff or Hardware Flow Control enabled
- Update: Windows 98 and Windows NT 4.0 support is available only in OEM version now
更新時間：2019-05-25
更新細節：
What's new in this version:
WinZip Driver Updater 5.28.0.4
- Change log not available for this version
WinZip Driver Updater 5.27.3.14
- Change log not available for this version
WinZip Driver Updater 5.27.2.16
- Change log not available for this version
WinZip Driver Updater 5.27.0.26
- Change log not available for this version
WinZip Driver Updater 5.25.9.12
- Change log not available for this version
WinZip Driver Updater 5.25.8.4
- Change log not available for this version
更新時間：2019-05-25
更新細節：
What's new in this version:
WebSite Auditor 4.38.9
New feature:
- Webcal has been added to the list of protocols
WebSite Auditor 4.38.8
- A few minor bugs have been fixed
WebSite Auditor 4.38.7
New feature:
- The problem of incorrect Missing Return Links count in the Localization group has been fixed
WebSite Auditor 4.38.5
- From now on, WebSite Auditor supports Google's updated PageSpeed Insights API, providing you with the most extensive information on your pages' speed performance
WebSite Auditor 4.38.4
- The problem of connecting proxies to WebSite Auditor has been fixed and other minor bugs resolved
WebSite Auditor 4.38.3
- Change log not available for this version
WebSite Auditor 4.38.2
- A few issues have been fixed in WebSite Auditor: the JavaScript timing settings have been improved, the keyword count algorithm for page analysis has been updated and some other minor bugs fixed
WebSite Auditor 4.38.1
- A few issues have been fixed
WebSite Auditor 4.38
- Miscellaneous: W3C libraries have been updated in Website Auditor. Dropbox connection updated: the software can use the proxy from Proxy Settings to connect to Dropbox
WebSite Auditor 4.37.11
- Domain Strength update problem and the issue of updating website's mobile thumbnail have been resolved
WebSite Auditor 4.37.10
- Several new columns have been added to the TF-IDF workspace under Content Analysis
WebSite Auditor 4.37.9
- A few minor issues have been fixed
WebSite Auditor 4.37.8
- A new 'properties' element has been added to Google Analytics settings in WebSite Auditor to help users find and connect the right view
WebSite Auditor 4.37.7
- Interface scaling parameters have been updated and a few other minor issues fixed
WebSite Auditor 4.37.6
- The algorithm for analyzing srcset source tags has been improved, a few minor issues have been fixed
WebSite Auditor 4.37.5
- The performance of page audit analysis has been improved, the algorithms for analyzing hreflang elements and x-robots-tags have been updated
WebSite Auditor 4.37.4
- Software auto-update process has been improved for apps that have scheduled tasks, the problem of displaying incorrect characters for project names with cyrillic symbols has been fixed
WebSite Auditor 4.37.3
- A number of issues were fixed in Website Auditor, including problems with incorrect characters in saved project names, alphabetic sorting for scheduled tasks, background task interruption during auto-updates, and many other minor improvements
WebSite Auditor 4.37.2
- New search engine added: Google Afghanistan. Issues fixed in WebSite Auditor: content analysis failed with 'Too many redirects' error for some pages, resource-size calculation algorithm has been updated
WebSite Auditor 4.37.1
- Synchronization of project and global settings has been added to LinkAssistant: synchronize customer and company profiles, Google accounts, project and global events across different projects and apps
WebSite Auditor 4.36.3
- Updated robots.txt parsing algorithm, the logic for pageviews collection has been improved
WebSite Auditor 4.36.2
- Fixed: the 'No Hreflang' filter for the Localization module
- Updated: the algorithm for 'Conflicting hreflang elements
WebSite Auditor 4.36.1
- A new feature has been added to WebSite Auditor: analyze multi-language/locale websites, detect incorrect usage of Hreflang attributes, create custom language variants for pages. A new index has been applied for calculation of InLink Rank and Domain Strength metrics
WebSite Auditor 4.34.23
- The software auto-update mechanism for background tasks has been improved and several other minor issues have been solved
WebSite Auditor 4.34.22
- Competition research algorithm has been updated, incorrect status for completed scheduled tasks and several other minor issues have been solved in WebSite Auditor
WebSite Auditor 4.34.21
- The internal browser has been improved and adjusted for better interaction with Google re-captcha. A few other minor issues have been fixed
WebSite Auditor 4.34.20
- A few minor issues have been fixed
WebSite Auditor 4.34.19
- The list of statuses for the Server Response Time column has been updated. A new change for automatic software updates has been implemented: new version releases will be skipped by applications that have active tasks running in the background
WebSite Auditor 4.34.18
- New features have been added to LinkAssistant: create scheduled tasks only for project records that are marked with specific tags; pause and resume the execution of tasks; new selection mode available: now it is possible to select only several columns to copy results from a project workspace
WebSite Auditor 4.34.17
- A few minor issues have been fixed
WebSite Auditor 4.34.16
- Some performance updates have been implemented
WebSite Auditor 4.34.15
- the robots.txt parser has been updated and a few other minor bugs have been fixed
WebSite Auditor 4.34.14
- Miscellaneous: A few issues have been fixed in Website Auditor: incorrect encoding was used for title characters when JavaScript was enabled in the project, URLs with cyrillic characters were incorrectly displayed for some websites
WebSite Auditor 4.34.13
- Some performance updates have been implemented
WebSite Auditor 4.34.12
- A few minor bugs have been fixed
WebSite Auditor 4.34.11
- The Website Auditor page parser has been updated: fixed the problems of keyword counts in body, keyword count in H1-H6 tags, the parsing algorithm has been improved
WebSite Auditor 4.34.10
- Change log not available for this version
WebSite Auditor 4.34.9
- A few minor bugs have been fixed
WebSite Auditor 4.34.8
- The TF-IDF keyword analysis algorithm has been improved for WebSite Auditor
WebSite Auditor 4.34.7
- The algorithm for updating Alexa Rank has been optimized and improved
WebSite Auditor 4.34.6
- Change log not available for this version
WebSite Auditor 4.34.5
- The performance of the internal browser has been optimized and improved
WebSite Auditor 4.34.4
- A few minor bugs have been fixed
WebSite Auditor 4.34.3
- Minor performance updates have been implemented and a few bugs have been fixed
WebSite Auditor 4.34.2
- A few minor bugs have been fixed
WebSite Auditor 4.34
- A few minor bugs have been fixed
WebSite Auditor 4.33.9
- A few minor bugs have been fixed
WebSite Auditor 4.33.8
- The noindex meta tag algorithm has been updated and a few other minor bugs have been fixed
WebSite Auditor 4.33.7
- The whois library for checking domain age has been updated and some other minor bugs have been fixed
WebSite Auditor 4.33.6
- A few minor bugs have been fixed
WebSite Auditor 4.33.5
- Viber has been added to the list of supported protocols, the application/rss+xml has been added to the list of supported sitemap content-types
WebSite Auditor 4.33.4
- A few minor bugs have been fixed
WebSite Auditor 4.33.3
- A few minor bugs have been fixed
WebSite Auditor 4.33.2
- The error counter for the Page Audit module has been fixed
WebSite Auditor 4.33.1
- A few minor bugs have been fixed
WebSite Auditor 4.33
- Edit your website structure, save visualization as PDF/PNG/SVG, label and color pages on the graph and other useful features have been added to Website Auditor. Some minor bugs have been fixed: word count for page body element, parsing pages that are using js elements and other minor issues
WebSite Auditor 4.32.7
- Some performance updates have been implemented
WebSite Auditor 4.32.6
- Some performance updates have been implemented
WebSite Auditor 4.32.5
- Change log not available for this version
WebSite Auditor 4.32.4
- A few minor issues have been fixed
WebSite Auditor 4.32.3
- Change log not available for this version
WebSite Auditor 4.32.2
- Now it is possible to edit the list of supported page extensions in project settings to let Website Auditor collect web-pages with custom extensions
WebSite Auditor 4.32.1
- The search algorithms for orphan pages and sitemap detection have been improved in Website Auditor
WebSite Auditor 4.32
- The pages with .mvc and .nspx extension are now supported in WebSite Auditor. The algorithm for detecting pages' charset type has been improved
WebSite Auditor 4.31.5
- Website Auditor now supports websites with .phtml and .wf extensions. The issue with the incorrect calculation of keywords in Page Audit report has been fixed.
更新時間：2019-05-25
更新細節：
What's new in this version:
LinkAssistant 6.27.9
- A few minor bugs have been fixed and some performance updates have been implemented
LinkAssistant 6.27.8
- A few performance updates have been implemented
LinkAssistant 6.27.7
- A few minor bugs have been fixed: incorrect selection of search engines for keyword difficulty, the error exception when creating a new project for non-existing TLD and a few other bugs have been resolved
LinkAssistant 6.27.5
- A few minor bugs have been fixed and some performance updates have been implemented
LinkAssistant 6.27.4
- The problem of connecting proxies to LinkAssistant has been fixed and other minor bugs resolved
LinkAssistant 6.27.3
- A few minor bugs have been fixed and some performance updates have been implemented
LinkAssistant 6.27.2
- LinkAssistant has been updated for the new changes in Google Ads Keyword Planner markup
LinkAssistant 6.27.1
- A few issues have been fixed
LinkAssistant 6.27
- Miscellaneous: backlink verification algorithm has been updated and improved, a new factor added: Yandex SQI
LinkAssistant 6.26.11
- Domain Strength update problem has been resolved
LinkAssistant 6.26.10
- A few minor bugs have been fixed and several performance updates have been implemented
LinkAssistant 6.26.9
- A few minor bugs have been fixed
LinkAssistant 6.26.8
- A new 'properties' element has been added to Google Analytics settings in LinkAssistant to help users find and connect the right view
LinkAssistant 6.26.7
- Interface scaling parameters have been updated and a few other minor issues fixed
LinkAssistant 6.26.6
- A few minor issues have been resolved
LinkAssistant 6.26.5
- A few minor bugs have been fixed
LinkAssistant 6.26.4
- Software auto-update process has been improved for apps that have scheduled tasks, the problem of displaying incorrect characters for project names with cyrillic symbols has been fixed
LinkAssistant 6.26.3
- A number of issues were fixed in LinkAssistant, including problems with incorrect characters in saved project names, alphabetic sorting for scheduled tasks, background task interruption during auto-updates, and many other minor improvements
LinkAssistant 6.26.2
- New search engine added: Google Afghanistan. Issues fixed in LinkAssistant: problems with collecting backlinks for websites with German interface, incorrect detection of user country for Google Catalonia and a few other minor bugs
LinkAssistant 6.26.1
- Synchronization of project and global settings has been added to LinkAssistant: synchronize customer and company profiles, Google accounts, project and global events across different projects and apps
LinkAssistant 6.25.3
- IP library has been updated and some minor issues have been fixed
LinkAssistant 6.25.2
- The link directory generator and proxy rotation features have been fixed
LinkAssistant 6.25.1
- A new index has been applied for calculation of InLink Rank and Domain Strength metrics
LinkAssistant 6.23.23
- The software auto-update mechanism for background tasks has been improved. A few issues have been fixed: the time counter for captcha window failed to be reset upon mouse movement and several other minor issues have been solved
LinkAssistant 6.23.22
- A few issues have been fixed: incorrect status for completed scheduled tasks and several other minor issues have been solved
LinkAssistant 6.23.21
- The internal browser has been improved and adjusted for better interaction with Google re-captcha. A few other minor issues have been fixed
LinkAssistant 6.23.20
- A few minor issues have been fixed
LinkAssistant 6.23.19
- A new change for automatic software updates has been implemented: new version releases will be skipped by applications that have active tasks running in the background
LinkAssistant 6.23.18
- New features have been added to LinkAssistant: create scheduled tasks only for project records that are marked with specific tags; pause and resume the execution of tasks; new selection mode available: now it is possible to select only several columns to copy results from a project workspace
LinkAssistant 6.23.17
- A few minor issues have been fixed
LinkAssistant 6.23.16
- An issue has been fixed: the quick filter now can recognize new tags of the prospects that have been added manually or imported into the project
LinkAssistant 6.23.15
- LinkAssistant has been adjusted to the new Google Ads interface
LinkAssistant 6.23.14
- Change log not available for this version
LinkAssistant 6.23.13
- Some performance updates have been implemented
LinkAssistant 6.23.12
- A few minor bugs have been fixed
LinkAssistant 6.23.11
- Fixed the problem of generating report names with cyrillic characters
LinkAssistant 6.23.10
- fixed the text encoding issue for Spanish and French installation wizards
- a new search engine Google.kg has been added
LinkAssistant 6.23.9
- A few minor bugs have been fixed
LinkAssistant 6.23.8
- The algorithm for connecting to Google Adwords account has been updated in LinkAssistant
LinkAssistant 6.23.7
- The algorithm for updating Alexa Rank has been optimized and improved
LinkAssistant 6.23.6
- A few minor bugs have been fixed in LinkAssistant
LinkAssistant 6.23.5
- The performance of the internal browser has been optimized and improved
LinkAssistant 6.23.4
- A few minor bugs have been fixed
LinkAssistant 6.23.3
- Minor performance updates have been implemented and a few bugs have been fixed
LinkAssistant 6.23.2
- A few minor bugs have been fixed
LinkAssistant 6.23
- A few minor bugs have been fixed
LinkAssistant 6.22.9
- Some performance updates have been implemented
LinkAssistant 6.22.8
- A few minor bugs have been fixed
LinkAssistant 6.22.7
- The whois library for checking domain age has been updated
LinkAssistant 6.22.6
- A few minor bugs have been fixed
LinkAssistant 6.22.5
- The problem of blurred interface on retina displays has been fixed
LinkAssistant 6.22.4
- Some performance updates have been implemented
LinkAssistant 6.22.3
- Some performance updates have been implemented
LinkAssistant 6.22.2
- A few minor bugs have been fixed
LinkAssistant 6.22.1
- A few minor bugs have been fixed
LinkAssistant 6.22
- Change log not available for this version
LinkAssistant 6.21.7
- Some performance updates have been implemented
LinkAssistant 6.21.6
- The fix for new Google Adwords Keyword Planner interface has been implemented
LinkAssistant 6.21.5
- A few minor bugs have been fixed
LinkAssistant 6.21.4
- A few minor bugs have been fixed
LinkAssistant 6.21.3
- A few minor bugs have been fixed
LinkAssistant 6.21.2
- A few minor bugs have been fixed
LinkAssistant 6.21.1
- A few minor bugs have been fixed
LinkAssistant 6.21
- A few minor bugs and java-related issues have been fixed
LinkAssistant 6.20.5
- A few minor bugs have been fixed
LinkAssistant 6.20.4
- Fixed the problem with LinkAssistant modal windows on MacOS that opened under the main window
LinkAssistant 6.20.3
- Improved UI for minimized interface view and for screens with low resolution and some other minor bugs have been fixed
LinkAssistant 6.20.2
- A few minor bugs have been fixed
LinkAssistant 6.20.1
- New LinkAssistant version with improved memory utilization algorithm for 64-bit Windows machines
LinkAssistant 6.20
- Several bugs have been fixed and UX improvements implemented
更新時間：2019-05-25
更新細節：
What's new in this version:
Rank Tracker 8.27.9
- Fixed the problem of incorrect filtering conditions for the advanced filter, the project saving error and a few other minor bugs have been resolved
Rank Tracker 8.27.8
- A few minor bugs have been fixed
Rank Tracker 8.27.7
Miscellaneous:
- A few minor bugs have been fixed: incorrect selection of search engines for keyword difficulty, the error exception when creating a new project for non-existing TLD and a few other bugs have been resolved
Rank Tracker 8.27.5
- Minor bug-fixes and stability improvements added
Rank Tracker 8.27.4
- Fixed the issue that was executing the rank checking task for keywords that were marked with the tags that have not been specified in the Scheduled task settings
Rank Tracker 8.27.3
- A few minor bugs have been fixed and some performance updates have been implemented
Rank Tracker 8.27.2
- Rank Tracker has been updated for the new changes in Google Ads Keyword Planner markup, a few other minor bugs have been fixed
Rank Tracker 8.27.1
- A few issues have been fixed
Rank Tracker 8.27
- Miscellaneous: 10 new regions have been added to the Ranking Keywords Module. Now you may collect results for Canada, UK, Germany, France and other countries
Rank Tracker 8.26.11
- Several issues have been fixed in Rank Tracker: updating Domain Strength, collecting video universal results from Google, disabled Captcha recognition option and a few other minor problemsa
Rank Tracker 8.26.10
- The error related to opening of projects in Rank Tracker and a few other minor bugs have been fixed. The search volume import has been updated
Rank Tracker 8.26.9
- Google Search console connection has been fixed, the problem of connecting to Google Analytics profiles without a property has been resolved
Rank Tracker 8.26.8
- A new 'properties' element has been added to Google Analytics settings in Rank Tracker to help users find and connect the right view
Rank Tracker 8.26.7
- Interface scaling parameters have been updated and a few other minor issues fixed
Rank Tracker 8.26.6
- The export template error for new scheduled tasks has been fixed, a few minor issues have been resolved
Rank Tracker 8.26.5
- A few issues have been fixed: incorrect detection of the Answers SERP type, the error caused by creating of scheduled tasks and some other minor bugs resolved
Rank Tracker 8.26.4
- Software auto-update process has been improved for apps that have scheduled tasks, the problem of displaying incorrect characters for project names with cyrillic symbols has been fixed
Rank Tracker 8.26.3
- A number of issues were fixed in Rank Tracker, including problems with incorrect characters in saved project names, alphabetic sorting for scheduled tasks, background task interruption during auto-updates, and many other minor improvements
Rank Tracker 8.26.2
- New search engine added: Google Afghanistan. Issues fixed in Rank Tracker: incorrect detection of user country for Google Catalonia and a few other minor bugs
Rank Tracker 8.26.1
- Synchronization of project and global settings has been added to LinkAssistant: synchronize customer and company profiles, Google accounts, project and global events across different projects and apps
Rank Tracker 8.25.3
- IP library has been updated and a few issues related to updating search volume and competition have been fixed
Rank Tracker 8.25.2
- Fixed: the proxy rotation feature
- Updated: fonts for language names in the Keyword Research module
Rank Tracker 8.25.1
- A new index has been applied for calculation of InLink Rank and Domain Strength metrics in Rank Tracker. A few minor issues have been fixed: the saving of the Rank History report, export template error and a few other problems
Rank Tracker 8.23.23
- The software auto-update mechanism for background tasks has been improved. The Google Forecast method and a few other minor issues have been fixed
Rank Tracker 8.23.22
- The Google Forecast feature has been updated to support Google Ads accounts. Generating of PDF reports has been fixed
Rank Tracker 8.23.21
- The internal browser has been improved and adjusted for better interaction with Google re-captcha. A few other minor issues have been fixed
Rank Tracker 8.23.20
- A few minor issues have been fixed
Rank Tracker 8.23.19
- The algorithm for collecting competitors for the TF-IDF factor has been updated and a few other minor bugs have been fixed. A new change for automatic software updates has been implemented: new version releases will be skipped by applications that have active tasks running in the background
Rank Tracker 8.23.18
- New features have been added to Rank Tracker: create scheduled tasks only for project records that are marked with specific tags; pause and resume the execution of tasks; a new SERP dialog has been added to the Ranking Keywords module, which shows the list of ranking websites
Rank Tracker 8.23.17
- A few minor issues have been fixed
Rank Tracker 8.23.16
- New type of video results is now supported by Rank Tracker for the SERP features. An issue has been fixed in Rank Tracker: URLs with encoded symbols are now properly displayed in the project
Rank Tracker 8.23.15
- Rank Tracker has been adjusted to the new Google Ads interface and Google Search Console verification mechanism
Rank Tracker 8.23.14
- Miscellaneous: A new 'Found In' column has been added to the Keyword Sandbox module: it contains the names of the methods where new keyword ideas have been collected from. The 'Tags' column is now synchronized across all Keyword Research modules
Rank Tracker 8.23.13
- Change log not available for this version
Rank Tracker 8.23.12
- A few minor bugs have been fixed
Rank Tracker 8.23.11
- The problem of counting keyword difficulty for the project domain has been fixed
Rank Tracker 8.23.10
- A new search engine Google.kg has been added, the problem with calculating keyword difficulty in the Keyword Research Module has been fixed
Rank Tracker 8.23.9
- A few minor bugs have been fixed
Rank Tracker 8.23.8
- The algorithm for connecting to Google Adwords account has been updated in Rank Tracker
Rank Tracker 8.23.7
- The problem with calculating organic total visits has been fixed in Rank Tracker. Optimized the process of connecting GA profiles with multiple accounts.
Rank Tracker 8.23.6
- Change log not available for this version
Rank Tracker 8.23.5
- Google.ca Images has been added to the list of supported search engines
Rank Tracker 8.23.4
- A few minor bugs have been fixed
Rank Tracker 8.23.3
- The problem of country selection in Google Adwords Keyword Planner Tool and a few other bugs have been fixed
Rank Tracker 8.23.2
- A few minor bugs have been fixed
Rank Tracker 8.23
- Discover the keywords a website is already ranking for with the help of a new Ranking Keywords method
Rank Tracker 8.22.9
- A few minor bugs have been fixed
Rank Tracker 8.22.8
- A few minor bugs have been fixed
Rank Tracker 8.22.7
- The whois library for checking domain age has been updated
- Fixed the issue of Yandex Direct results being collected together with organic rankings
Rank Tracker 8.22.6
- A few minor bugs have been fixed
Rank Tracker 8.22.5
- The problem of blurred interface on retina displays has been fixed
Rank Tracker 8.22.4
- A few minor bugs have been fixed
Rank Tracker 8.22.3
- A few minor bugs have been fixed
Rank Tracker 8.22.2
- A few minor bugs have been fixed
Rank Tracker 8.22.1
- A few minor bugs have been fixed
Rank Tracker 8.22
- Solved the problem with calculating average cost per click value
Rank Tracker 8.21.7
- The issue related to collecting search volume via Google Forecast has been fixed
Rank Tracker 8.21.6
- The fix for new Google Adwords Keyword Planner interface has been implemented
Rank Tracker 8.21.5
- A few minor bugs have been fixed
Rank Tracker 8.21.4
- A few minor bugs have been fixed
Rank Tracker 8.21.3
- Fixed the problem with collecting URLs from Google Top Stories into Keyword Difficulty results
Rank Tracker 8.21.2
- Fixed the bug that caused collecting wrong number of competitors for the 'Keyword Difficulty' tab
Rank Tracker 8.21.1
- A few minor bugs have been fixed
Rank Tracker 8.21
- Fixed the issue with incorrect visibility graph results for project competitors
Rank Tracker 8.20.5
- Fixed duplicated entries for the Keyword Map module, the issue with the filters for Yandex Regions has been fixed
Rank Tracker 8.20.4
- Fixed the problem with Rank Tracker modal windows on MacOS that opened under the main window
Rank Tracker 8.20.3
- Improved UI for minimized interface view and for screens with low resolution and some other minor bugs have been fixed
Rank Tracker 8.20.2
- The time filter from the Keyword Research module has been fixed
Rank Tracker 8.20.1
- New Rank Tracker version with improved memory utilization algorithm for 64-bit Windows machines
Rank Tracker 8.20
- Several bugs have been fixed and UX improvements implemented in Rank Tracker