SketchUp Make (64-bit) 歷史版本列表
更新時間：2017-02-16
更新細節：
What's new in this version:
Fixes/Improvements Stability:
- Fixed a frequent crash that could occur when inserting components and doing other actions (e.g., renaming a component, deleting entities, changing component properties)
- Fixed a frequent crash that could occur when copy/pasting geometry that needs to be merged with hidden geometry
- Fixed a frequent crash that could occur when doing a copy/rotate after having cancelled out of a previous copy/rotate by activating another tool
- Fixed a frequent crash that could occur on some systems with AMD/ATI graphics cards
- Fixed a crash that could occur when opening/working in some models with unfixed validity errors
- Added a fix for a non-reproducible crash that could occur when using the Rectangle tool
Tools and Inferencing:
Made updates to Measurements toolbar entries for tools:
- A closing bracket is now added automatically when an opening bracket is entered for both square and angle brackets related to point and delta input such as [nn,nn,nn] and (in US locale)
- (Win) SketchUp now recognizes both the decimal and list separators that are set within the Windows OS
- Fixed an issue with the Rotated Rectangle tool where entries in the VCB (Measurements toolbar) were not working as expected after the second click
- Fixed an issue in which Dimensions or Text would snap to a sub-component origin instead of the component origin
- Fixed an issue with the Tape Measure tool in which a model would not rescale when measuring two points on a face and entering in a value in the VCB (Measurements toolbar)
- Fixed an issue with the Tape Measure tool in which you could not infer from a face to create a guideline along another face
- (Win) Fixed an issue with the Tape Measure tool where guides would toggle off when using Ctrl + Z to undo a previous operation
Miscellaneous:
- Fixed an issue where materials on faces could be lost or faces could be flipped after modifying geometry in certain cases
- Fixed an issue where an offset of an ellipse would sometimes offset as a circle
- Fixed an issue where color swapping/pixelation would occur on very small textures
- Improved Checkup’s messaging for graphics cards that report inaccurate memory information
- Improved our ability to get diagnostic data on startup crashes
- Fixed an issue where the letterbox bars were displayed incorrectly when the Advanced Camera Tools’ aspect ratio did not match the current window
- Fixed an issue where Advanced Camera Tools did not correctly export 2D images
LayOut Release Notes:
- Fixes/Improvements Stability
- Fixed a Raster and Hybrid Rendering crash that would show up during DWG export
- Fixed a crash related to the Text Edit
- (Win) Fixed a crash with DWG export when the file being exported was in use or the user does not have write permission
DWG Export
- (Win) Fixed an issue where exporting an individual page would export the following page
- Tables
- Fixed an issue where inserting certain Excel files would fail, we have expanded the ability to insert a wider range of Excel formatting
- Fixed an issue where the user would not be able to update a table when the external file was lost
- Fixed an issue where Excel formatting was used when the ‘Use Excel Formatting’ was unchecked
- PID’s/Dimensioning
- Fixed an issue where entering a new dimension after exiting Edit 3D View would produce a wrong measurement
- Miscellaneous
- Fixed an issue where current camera position would be lost when switching to a scene with no camera properties
- Fixed an issue where Classification attributes were not showing up in the Label auto-text dropdown
- (Win) Fixed an issue where the SketchUp model text can appear too big within LayOut
SketchUp API Release Notes:
- Fixes/Improvements General
- Ruby API
- Fixed an issue with HtmlDialogs where SketchUp would crash when the dialog was closed before all callbacks were processed
- Fixed an issue where extensions with multiple periods in filenames would not load
- C API
- Fixed an issue where BSTRToUTF8() returned unreliable data
- Added SUGetColorOrder() to allow for a platform dependent way to get the indices indicating the ordering of color data within 32-bit bitmap images
- Added SUTextureWriterGetImageRep() to allow for a way to export ImageRep from TextureWritter
- Added SUModelCreateFromBuffer() to allow for the creation of models from the bytes buffer
更新時間：2016-11-17
更新細節：
更新時間：2016-11-15
更新細節：
What's new in this version:
New:
Graphics Pipeline:
- With SketchUp 2017, we have completely reworked our graphics pipeline - i.e., the way we display SketchUp models. This was a massive change that will allow us to innovate far beyond what we have been able to do in the past
This new graphics pipeline has stricter hardware and software requirements than in previous versions of SketchUp. To run SketchUp, you will need:
- A 64-bit operating system
- A graphics card that supports OpenGL 3.0 or above
- A graphics card that supports Hardware Acceleration. We will no longer support software rendering
- A graphics card that passes a series of tests that are run by SketchUp 2017 to assure that your card is capable of rendering SketchUp models. These tests include checks like compilation of SketchUp's GLSL shaders and support for OpenGL framebuffer objects
- If your machine does not meet these requirements, you will see an error dialog when launching SketchUp, LayOut, Style Builder, and Viewer that lets you know which requirement you did not meet and which will prevent you from running SketchUp until you fix the error. If you see this error dialog, try upgrading your graphics card driver - upgrading your driver is a good first troubleshooting step and often solves the error
High DPI Support for the Modeling Window:
- The SketchUp 2017 modeling window is now “DPI aware”. In SketchUp 2016, we scaled the User Interface (toolbars, cursors, etc). In SketchUp 2017, we are now scaling content in the modeling window so that you can better see the masterpieces you are creating! This work includes larger, scaled inference graphics and linework and updates to our inference icons
Extension Manager:
- The Extension Manager is the new way to manage how extensions interact with SketchUp. Users will be able to install, uninstall, enable, disable and update extensions from this new dialog. In addition, users can set their extension loading policy through this same dialog. This is a complete replacement for the extension and extension loading policy areas previously found within the System Preferences dialog. The Extension Manager can be found within the Window menu on both Windows and Mac
Tool and Inference Improvements:
As always, we are looking at ways to improve our core modeling tools and inferencing. This release is no different. Here's a brief description of what's new:
- Improved Offset tool: Previously the Offset tool would create overlapping or self-intersecting geometry. We've changed the tool to automatically trim these overlaps to create clean boundaries with no overlaps. The old functionality is still available via a modifier key
- Rectangle tool plane and shape locking: The Rectangle tool now works with arrow keys to lock the plane normal to an axis or surface. This includes the ability to lock off-axis planes using the down arrow key. Now the Rectangle tool matches the inferencing capabilities of the circle and polygon tools. Additionally, pressing shift can now lock the proportions of a square or golden section
- Rotated Rectangle tool plane locking improvement: The Rotated Rectangle tool now respects a locked plane across all steps for the tool. If you chose a surface to lock the tool to at the beginning, this orientation will persist throughout creating your rectangle
- Perpendicular to Face inference: We added the ability to hover over any surface and then find an inference for the direction perpendicular to the face. The drawing line and reference surface will be highlighted in magenta and a new “Perpendicular to Face” tooltip will be displayed. Note it is not possible to force this inference using the down arrow key but it can be locked once it appears by holding shift
- Component Origin inference: We added a new “Origin in Component” inference point which now provides the ability to find and snap to a component's origin. This inference shows up whether there is geometry on the origin or not and has higher priority over other inferences. It shows up automatically when you hover over a selected component or group with a drawing tool
Persistent IDs:
- Persistent IDs for entities have been added to SketchUp 2017. This feature is useful to developers and allows us to improve interoperability between LayOut and other products. A unique, persistent ID number is now internally assigned to geometry when it is added to a model. This includes unique IDs for edges, vertices, faces, and more that will be maintained even if the geometry is moved, rotated, or scaled
Colorblind Accessibility:
- It is now possible to customize SketchUp's red, green, blue, magenta, and cyan inference colors. If you have trouble distinguishing red from green or would simply like to customize your SketchUp colors, it is now possible under SketchUp Preferences > Accessibility. If you change these settings, you may notice that the axis colors will get brighter to match your selected direction colors exactly. In SketchUp 2016 and earlier versions, the axis colors were slightly muted relative to the inference colors. Also note that if you adjust your colors, SketchUp will continue to refer to red, green, and blue axis directions in tool tips, the status bar and the Instructor. Inference Icons (end-points, mid-points, on edge, etc... ) are also unaffected by this feature and will remain their original colors but we have updated the shapes to improve visibility
- Additionally, a new “Color Blind Style” has been added to the “Color Sets” styles library. Use this style as a base for dialing in your custom colors and shades. It is intended to help maximize people's ability to see when inferences appear. Since there are many different types of colorblindness, you may need to edit this style to best fit with the colors that work for you. Once you are done, don't forget to set up a template with your new style
Smarter Graphics Card Settings:
- When you launch SketchUp, we are now much smarter about choosing the ideal graphics card settings (i.e., the ideal “Pixel Format”) to make SketchUp run the best it can. Previously, we sometimes selected settings that didn't allow models to display as well as they could have and which had a negative impact on performance
- As part of this work, we have made it easier for you to change your multisample anti-aliasing settings in Preferences > OpenGL on Windows. Note though that we have chosen the setting that we think is ideal for your graphics card and that if you choose too high of a setting, performance and possibly stability may be affected
- We have added a “Warning“ section to Preferences > OpenGL > Graphics Card Details to show any potentially negative conditions related to your graphics card so that you can take actions to improve your situation. Note that if your graphics card shows warnings, you will see a big warning icon on the Preferences > OpenGL dialog with some text that explains you need to click the Graphics Card Details button for more information
Standardized Product Content Locations:
- We have standardized where product content, stuff like collections of components, materials and styles are stored on the file system
On Windows, we moved the default content that comes with SketchUp (Components, Materials and Styles) out of the Program Files directory and placed them in the ProgramData directory. And on both Windows and Mac, we created Components, Materials, Styles and Templates folders for your user related content. By default, these folders are in the following locations:
- Windows: C:UsersAppDataRoamingSketchUpSketchUp 2017SketchUp
- Mac: Users//Library/Application Support/SketchUp 2017/SketchUp/
- Note that if you store your content in these folders, it will show up in the Components, Materials and Styles browsers without you having to do anything and your templates will show up on the Templates pane as well. Additionally, users no longer require special privileges in order to modify the contents of these folders
- We have made it easier for you to access your content by adding new functionality to the Preferences > Files pane on Windows and we added this Preferences pane on the Mac. Simply click the Open in Explorer/Finder buttons to access your content vs. having to remember the folder locations listed above
Improved Group to Component workflow & Component handling with Solid Tools:
- We now present the create component dialog when converting a group to a component. This allows users to set the full range of component attributes when converting instead of having to go back and edit the resulting component in Entity Info or the Components dialog. This workflow helps a great deal when using the Solid Tools on components. The Solid Tools still create groups but it's quick to use the create component option to redefine your desired component definitions
Support for macOS Sierra:
- Our QA team has smashed and banged on Apple's newest operating system, macOS Sierra, enough to say that SketchUp 2017 is fully compatible
Trimble Connect Extension:
The Trimble Connect Extension has been rewritten to utilize changes to the Trimble Connect and SketchUp Ruby APIs. Updates and new features include:
- Sign in: You can now use a Trimble ID or a Google account to sign in.
- Improved File Management: We've reworked the Open and Publish dialogs to make it faster to browse through your projects on Connect
- Collaboration Manager: A new dialog which allows you to create and manage ToDos, manage reference models and add comments about a model. The buttons across the top allow you to see the various panes: ToDos, Comments, Reference Models and Launch Trimble Connect
- ToDos - Create and Manage ToDos from the Collaboration Manager. Note that in order to view ToDos they must be associated with the model you are working on in SketchUp. If you want to view all the ToDos in a project use the full Connect web interface by Connect Icon in the upper right of the collaboration manager or accessing Connect in a web browser
- Comments - Click the icon showing two speech bubbles to view the comments pane. There you can view the comments for a model and add new comments
- Improved Model Referencing - Click the chain link icon to view the Reference Model pane. At the bottom of the Reference pane there are buttons for importing a new reference model as well as deleting or updating all existing reference models. Click the arrow next to a specific reference model to edit its alignment and save that adjustment back to a project. You can also individually update a reference model by clicking the Cloud + arrow icon next to the reference model's name
Bug Fixes/Small Improvements:
Stability:
- Fixed several crashes that could occur when opening or working in models that had a texture with no associated texture image
- Fixed a crash that could occur when printing a model with sketchy edges
- Fixed a crash that could occur when printing large models with textures
- Fixed a crash that could occur when exporting an animation that has watermarks and scenes with different edge styles
- (Win) Fixed a very frequent crash that could occur when modeling in SketchUp on machines with an Integrated Intel HD Graphics 5500 graphics card
- (Win) Fixed a crash that could occur when exporting animation as .webm or .ogv with a specified custom frame size
- (Mac) Fixed a frequent crash when opening models which have the sun direction nearly perpendicular to the eye direction
- (Mac) Fixed a frequent crash that could occur when importing a wide image or when opening a model that has a wide image
- (Mac) Fixed a crash that could occur when uploading a model after canceling the upload of a component to 3D Warehouse
- (Mac) Fixed a crash that occurred when closing a file with either the Dimensions tool or Texture Position tool active
- (Mac) Fixed an issue where SketchUp would sometimes crash after adding a location to a new model
- (Mac - Sierra) Fixed an intermittent crash that could occur when quitting and discarding changes with multiple documents open
- (Mac) Fixed a crash that could occur when closing a document after switching between documents
Model Display / Image Export:
Re-wrote how we display transparency, including making the following changes:
- Improved performance significantly
- Improved the accuracy of the appearance of the model
- Removed “Medium” transparency from the Transparency Quality dropdown. Pre SU 2017 models which use “Medium” transparency will now default to “Faster” transparency
- Added an “X-ray opacity” slider which applies when x-ray mode and nicer transparency are selected (defaulting to 65% for nicer transparency and remaining at 50% for faster transparency)
- Improved the enable/disable behavior on the Face tab of the Styles dialog so that the controls are enabled only when they will actually change the model
- Fixed an issue where shadows on face me component flashed in exported animations
- Fixed an issue where, when using color by axis, lines could incorrectly display as if they were on axis when they were not
- Fixed an issue where the selection highlight for a nested section plane looked wrong
- Fixed an issue where alpha images did not display when using the wireframe face style (when other images did display)
- Fixed an issue where the leader for view-based text drawn close to faces drew incorrectly
- Fixed an issue where sketchy edges could appear blurry when using the Maximum Texture size option
- Fixed an issue where the face selection highlight did not display correctly when using the Fade Similar Components option
- Fixed an issue where nested section planes did not always cut geometry as expected
- Fixed an issue where components in large models degraded to bounding boxes / other display elements dropped out of the model faster on AMD cards than other graphics cards
- Fixed an issue where materials incorrectly displayed as transparent when material transparency was off and x-ray was on
- Fixed an issue where the ground plane could z-fight with faces when in top view
- Fixed an issue where, when turning off section cuts, the foreground image of a matched photo was not always displayed
High DPI / Cursors:
- Elements in the modeling window (e.g., edges/edges effects, inference icons/linework, selection highlight, the matched photo/texture position grids, the model/component axes, guides, text/dimensions and the component bounding box) are now scaled and should look better on high DPI monitors
- Select region for edges and general “snapping” is now scaled and should improve selection on high DPI monitors. This will change the way SketchUp “feels” on larger resolution screens or when the display has been scaled in the OS preferences
- Updated inference icons graphics including new “Origin” inference icon
- Updated Position Texture tool icons
- (Win) Fixed issue where tool cursors would not show up when using shortcuts until the mouse was moved with Instructor dialog open
Tools and Inferencing:
- Added the ability to create guidelines from “On Face” inferences with the Tape Measure Tool
- Fixed an issue with the Rectangle tool in which dimensions displayed in the VCB (Measurements toolbar) did not always match the actual dimensions
- Fixed an issue with the Rectangle tool where a square or golden section could not be found when there was an active From Point inference
- Fixed an issue with the Rotated Rectangle tool where the protractor remained visible when moving the cursor out of the drawing window
- Fixed an issue with the Rotated Rectangle tool where an invalid input message was not received when entering invalid input in the VCB (Measurements toolbar) in some specific cases
- Fixed an issue with the Rotated Rectangle tool where an invalid input message was displayed when entering the same dimensions in the VCB (Measurements toolbar) after rectangle was drawn
- Added Instructor content for Rotated Rectangle to reference click and drag functionality
- Fixed an issue with the Circle/Polygon tools in which they could snap to axis inferences that didn't exist when off axis
- Fixed an issue with the Circle/Polygon tools in which they seemed to disappear during drawing and couldn't be completed when the radius was aligned with the axis normal to the circle/polygon
- Added error checking when entering number of segments in the VCB (Measurements toolbar) for Arcs/Circles/Polygons
- Removed the visual cues (endpoints and center) for Arcs/Circles/Polygons at small pixel views. Zoom in to see the cues if they are not visible
- Fixed an issue where an arrow key axis constraint was not released as expected if the last visited edge was outside the locked plan for protractor based tools
- Fixed an issue with protractor based tools where the locked/unlocked plane tooltip would continue to show and highlighting would not reset after pressing escape
- Fixed an issue where a parallel inference was lost after escaping out of Arc, Pie, and Move tools
- Fixed an issue where the Line, Tape Measure, and Move tools would lock a direction using arrow keys before first click
- Fixed an issue with the Move tool in which the angle value in the VCB (Measurements toolbar) did not always update appropriately when rotating with the Move tool while on an inference
- Added ability to inference original selection set when using rotate/copy
- Fixed an issue where an inference remained locked when panning followed by orbiting after having released shift
- Fixed an issue with the Scale tool in which Reset Scale did not redraw the scale boundaries correctly
- Fixed a cosmetic issue with the 2 Point Arc in which it would incorrectly highlight magenta when constrained with an axis arrow key after second click
- Fixed a cosmetic issue with the 3 Point Arc in which the line connecting the endpoints would lose axis coloring if the arc was a quarter, half, or three quarter circle
- Updated the VCB (Measurements toolbar) label for the Move tool from “Length” to “Distance” to more accurately describe the action
- Standardized references to shift in Instructor content for protractor/plane based tools
- (Mac) Fixed an issue with Rotated Rectangle in which it could snap to an angle that was one degree off of what was expected
Groups, Components and Solid Tools:
- Updated labels for Components/Groups in Entity Info (“Name” changed to “Instance”) and Create Component Dialog (“Name” changed to “Definition”) for added clarity
- Group Instance name is populated as the Component Definition in the create component dialog when converting a group to a component
- Revised message when editing or reloading a component with locked instances to clarify what will occur
- Fixed an issue in which the file name could be truncated when trying to reload a component that was previously imported or downloaded from 3D Warehouse
- Added ability to modify one instance of a component with Solid Tools and have all instances reflect that change by leveraging the updated group to component workflow. After modifying with a Solid Tool, right click and select Make Component, choose the definition name to be overwritten and this will then replace all instances of the component
Add Location:
- Fixed an issue where Add Location buttons could overlap each other
- Fixed an issue where the Add Location dialog could display poorly at high DPI
- Fixed the Add Location window from resizing when grabbing consecutive locations
Licensing:
- Fixed the error message that was displayed for expired private network licenses
- Fixed an issue in which a license was unable to be activated if there was an ë character in the username
- Updated the message seen when launching SketchUp with all of the network license seats in use
- Updated the message seen when launching SketchUp while offline with a network license
- Updated the message seen when an offline checked out network license has expired
- Updated the message seen when trying to check out a network license that has no checkout days associated with the license
- (Win) Fixed an issue in which some SketchUp Make users could not run SketchUp Make due to a licensing error
Mac Improvements:
- (Mac) Added the ability to toggle the scroll direction for zooming. This option is available under the new “Compatibility” pane in SketchUp Preferences
- (Mac) Added the ability to show model previews in Finder
- (Mac) Added ?, shortcut to display SketchUp Preferences
Miscellaneous:
- Improved performance of move/copy operation with multiple copies of a component
- Made a change in which a modified style that has not yet been updated will revert to the original style when switching scenes or clicking on the same scene
- Changed the default value in the warning message you see when adding a new style to “Save as a new style”
- Fixed an issue with the Components and Scenes dialog in which the list views did not resize properly when the dialogs were resized
- Fixed an issue where long layer names did not display when in the Layers toolbar
- Added a Persistent ID validation to the validity check to check for duplicate or missing Persistent IDs
- Potentially fixed an issue where, on a few configurations, saving a model caused a hang which could only be fixed by running a special registry script
- Darkened the Instructor text to make it easier to read
- Fixed an issue where non-Administrator users could not save templates
- Improved error message when trying to import a model into itself
- Added an error message when attempting to reload a higher version component and revised the message when attempting to import a higher version file
- Fixed an issue where file paths with Unicode characters could not be exported/imported via Preferences > Files
- Fixed an issue in which animation exports were skipping section plane animations
- Fixed an issue in which the length of an ellipse or a copied ellipse was reported incorrectly
- Removed Endpoints and Extension edge settings from the Architectural Design Style
- Fixed a typo in the Interior and Production Design template descriptions
- Removed an unused “Material1” from the 3D Printing templates
- Updated our Welcome dialog and product images
- Improved an issue where SketchUp would incorrectly display offline Learn tab content when online
- Added a Polish build
- Fixed a number of translation and truncation errors in localized builds
- (Win) Added the ability to view .skm and .style thumbnails
- (Win) Fixed an issue where the File Locations folder would open to the wrong directory in SketchUp Preferences after importing new Preferences
- (Win) Fixed issue in which the Section Plane icon on the Section toolbar was missing text
- (Win) Updated “System Preferences” dialog title to “SketchUp Preferences”
- (Win) Removed Cancel button from delete tray warning dialog since it is redundant with the No button
- (Win) Removed commas from the invalid tray name message to improve clarity on what characters are invalid
- (Win) Fixed an issue where a SketchUp model could be deleted when opening it as read only and saving it with the same name
- (Win) Optimized the size and position of some of SketchUp's web dialogs
- (Win) Updated the rendering mode used for the Dynamic Components extension
- (Mac) Fixed an issue where snappy dialog containing Entity Info could break apart when selecting entities or could show a gap when switching between documents
- (Mac) Fixed an issue where the desktop would switch unexpectedly when using multiple desktop
- (Mac) Moved the “Component/Group Highlighting” bounding box option to the new “Compatibility” pane in SketchUp Preferences for consistency with Windows
- (Mac) Fixed issue in which SketchUp would overwrite a read only file on save. A warning message now appears when attempting to save a read only file
- (Mac) Added file locking so that if a file is open and then an attempt is made to open it in a separate session or version of SketchUp on the same machine, a message will pop up indicating it will open as Read Only
- (Mac) Fixed an inconsistency in the Choose Watermark dialog text
- (Mac) Fixed an issue where SketchUp did not show user created material folder if they were named the same as our standard material folders
- (Mac) Fixed an issue in which a material could be replaced unexpectedly when in edit mode and selecting a different In Model material
- (Mac) Fixed an issue where the icon for the Trim tool was incorrect
- (Mac) Fixed an issue where SketchUp could get confused when moving your cursor between two open models while drawing
- (Mac) Fixed an issue where fonts printed larger when Vector Printing was selected
- (Mac) Fixed an issue where a material's HSB values were not refreshed to show the values for the material being edited
- (Mac) Fixed an issue where the Preferences dialog could disappear behind the SketchUp drawing window when clicking in the drawing window
- (Mac - Sierra) Fixed an issue in which a crash message appeared when toggling section planes or section cuts from the View menu
- (Mac - Sierra) Fixed an issue in which you could see duplicate icons in the dock when launching SU and File > Send to Layout was grayed out
更新時間：2016-03-01
更新細節：
What's new in this version:
General note:
- This maintenance release fixes a Windows-only bug introduced in the first release of SketchUp 2016, also known as “M0” [version numbers 16.0.19912 (Win 64-bit); 16.0.19911 (Win 32-bit)] where uninstalling SketchUp resets your default Internet browser. To avoid running into this issue, leave SketchUp 2016 “M0” installed prior to installing this update - i.e., install SketchUp 2016 M1 over your existing version of SketchUp 2016 M0.
FIXES / IMPROVEMENTS:
Stability:
- Fixed a crash when saving a model after importing a .dwg file that had a component definition name the same as one already in the model.
- Fixed a crash that could occur when auto-folding certain geometry and using an arrow key to lock direction.
Tools & Inferencing:
- Fixed an issue where SketchUp was incorrectly parsing negative lengths for specific formats such as feet and inches (e.g. -2’ 8”) and fractional (e.g. -15 1/2”) when entered in the VCB (Measurements toolbar) or the Ruby Console.
- Removed Shift + Press Alt (Win) and Shift + Press Command (Mac) functionality from Rotate and Protractor tools which freed the center of the protractor. Shift + Alt functionality clashes with the Windows shortcut default setting that changes keyboard language on Windows if multiple languages are installed. The down arrow key provides the same functionality.
- Fixed an issue with the Protractor and Rotate tools in which the protractor jumped to the corner of the screen when making multiple slope entries in the VCB (Measurements toolbar).
- Updated the Section Plane tool so it is colored based on the axis it is normal to when being placed (for consistency with other tools). Also, added a tooltip to indicate “Unlocked plane” or “Locked plane”.
- Added ability to Circle/Polygon tools to use Shift to lock through different point inferences (including endpoints, midpoints, arc centers, and guide points).
- Fixed an issue with Arc, Pie, Circle, and Polygon tools in which the tool could remain locked to a plane after releasing Shift with the down arrow key active.
- Fixed some cosmetic issues with several tools in which the drawing line could be incorrectly colored when locked with the down arrow key.
- Fixed a cosmetic issue with surface based tools in which the tool cursor could be incorrectly colored when locking with an arrow key and parallel to an axis plane.
- Fixed a cosmetic issue with several surface based tools in which the tool highlighted in magenta when pressing Shift to lock normal to an axis.
- (Win) Fixed an issue in which Entity Info accepted arc/pie/circle/polygon segments that were out of range as specified by an error message.
Customizable Utility Trays on Windows:
- Fixed an issue where the drawing window took focus away from extension dialogs. This impacted our shipped extensions (e.g. Component Options, Photo Textures) and some external extensions (including Brighter3D and SU Podium). In some cases extension dialogs appeared to disappear but were located behind the SketchUp window.
- Made a change so that the visibility of an auto-hide tray does not toggle by way of the Window menu or a shortcut as toggling this way caused the tray to immediately retract. The visibility of an auto-hide tray is only managed with the tray tab (hover over tab to display tray).
- Fixed an issue in which renaming an entity in Entity Info didn’t save correctly when subsequently clicking in Outliner.
- Fixed an issue where the selection highlighting was visible when softening edges. The highlight now returns once the cursor moves out of the Soften Edges dialog.
- Fixed an issue in which some drop down and sliders no longer scrolled using the mouse wheel when they had focus.
Localization:
- Fixed an issue where the "Use Image As" text was not translated for our localized builds.
- Fixed missing carousel arrows on our Spanish version of the Learn tab.
- Fixed several German translation issues on our About dialog.
- Fixed the German translation of ‘Knowledge Center’.
- Various other translation quality fixes.
General fixes:
- Fixed an issue where Ruby extensions fail to load / gave errors on launch if you have certain non-English characters in your Ruby path (which can occur if your Windows user name has certain non-English characters). If you’re still seeing an error with the Trimble Connect extension, please update that extension in the Extension Warehouse.
- Fixed our Updater Service so that the user is notified at a more appropriate frequency.
- Fixed issue where cameras were not being exported in the Collada exporter.
- Fixed an issue where temp files were not removed when exporting a 3D model.
- Fixed an issue where the text "This is a very long string. How long do we want?" could show up in the status bar on launch under rare circumstances.
- (Win) Fixed an issue where uninstalling SketchUp disabled the ability to set Internet Explorer as your default browser, and may have disabled other programs’ defaults similarly.
- (Win) Addressed several issues surrounding invalid file locations in Preferences.
- Fixed an issue where you could see a CFileException 3 error if the “Models” file location was invalid and auto-save kicked off. A new, more descriptive error message is now displayed.
- Fixed an issue in which you could see multiple CFileException 3 error messages within the same session even after updating the “Models” location to a valid path.
- Added a new error message upon startup if any of the File locations in Preferences > Files are invalid.
- Invalid file locations are now displayed in red in Preferences > Files and a tooltip is displayed indicating an invalid path.
- (Win) Fixed an issue where the slider labels in the Choose Colors dialog could be incorrect after switching between picker types.
- (Win) Increased upload timeout of models to the 3D Warehouse.
- Win) Replaced our expired signing certificate, then changed our digital signatures and timestamps to use SHA2/256, in accordance with Microsoft’s SHA1 deprecation announcement.
- (Win) Fixed an installer issue where the user would receive "An error occurred in PreBootstrapper. [could not create sketchup_install]" if an empty sketchup_install folder existed.
LAYOUT AND STYLE BUILDER RELEASE NOTES:
Fixes/Improvements:
- We made changes to prevent drawing pattern fills for single-segmented lines. This may prevent some memory related crashes.
- (Win) The object snap button wasn’t toggling correctly. Often, pressing the object snap button would turn object snapping on or off but the icon artwork wouldn’t change to the correct state. We fixed this so that the icon artwork will always reflect the object snapping state.
- We added check marks in the Move to Layer context menu next to any layers that the selection set currently has entities on.
- (Win) We fixed an issue that would cause save to fail (and pop a dialog exclaiming as much) if the save event came immediately after a previous save.
- (Win) We fixed a crash that occurred while attempting to close LayOut immediately after starting (before the getting started dialog was visible).
- Fixed an issue where LayOut was incorrectly parsing negative lengths for specific formats such as feet and inches (e.g. -2’ 8”) and fractional (e.g. -15 1/2”) when entered in the VCB (Measurements toolbar).
SKETCHUP API RELEASE NOTES:
Fixes/Improvements:
- Fixed issue where Sketchup.require/load fails to indicate a load failure.
- Fixed issue where load_on_start was not being honored on extensions that were manually placed within the Plugins folder.
- Fixed issue where extensions fail to load / gave errors on launch if you have certain non-English characters in your Ruby path (which can occur if your Windows user name has certain non-English characters). If you’re still seeing an error with the Trimble Connect extension, please update that extension in the Extension Warehouse.
- Fixed issue where the Trimble Connect Extension fails to load due to an invalid byte sequence error. Users will need to update to SketchUp 2016 M1 and update the Trimble Connect Extension to version 1.1.1 (via the Extension Warehouse) to see this change.
- (Win) Fixed issue where the unchecking an Extension within the Extension dialog caused the list to scroll back to the top of the list.
- Fixed issue where unchecking an Extension within the Extensions dialog did not change the appearance of the checkbox.
- (Win) UI.preferences_pages() will now include "Extensions Policy"
- (Win) UI.show_preferences("Extensions Policy") will now open the correct property page.
- Fixed issue where the Extension Status dialog incorrectly stated a user was under the "Identified Extensions Only" policy.
- Updated dialog content for extensions that were installed but not loaded. The dialog now clearly states that the user must load the extension in order to use it.
- Fixed issue where an extra dialog appeared on startup when loading an uncertified extension that was previously certified.
- Fixed issue where the language handler treated all double slashes (//) as comments.
- Prevent the unsigned extension dialog from appearing unless the number of unsigned and loaded extensions has changed.
- On startup, only extensions.rb, langhandler.rb and sketchup.rb will be loaded from the Tools directory.
- On startup, users will be prompted if any of the following files have been modified since being digitally signed: extensions.rb, langhandler.rb and sketchup.rb.
- Modified the Ruby file loading priority to be .rbe, .rbs then .rb.
- (Win) Fixed issue where third party DLLs in Windows system folders could override the Ruby standard library DLLs.
- Fixed issue where extensions installed in the Plugins directory were not respecting the load_on_start value.
- Added Sketchup::RegionalSettings.decimal_separator
- Added Sketchup::RegionalSettings.list_separator
更新時間：2015-11-20
更新細節：
What's new in this version:
Trimble Connect:
- Trimble Connect is a new way to store, sync, reference, share, and collaborate on design/build projects. Once you've signed up then start uploading .skp, .pdf, .dxf, .ifc. files. If you already have an account for 3D Warehouse or Extension Warehouse, we recommend that you use the same login (email) when creating a Trimble Connect Account. Trimble Connect allows users to publish, open, import reference files and update SKPs from Trimble Connect project folders. As you’re modeling you can even pull in and update reference SketchUp models as if they were locally hosted components. To learn more about Trimble Connect read this article.
Reload Components with 3D Warehouse models:
- In SketchUp 2016, a context click on a component gives you the opportunity to reload (or swap out) a new component directly from 3D Warehouse. This action will reload every instance of that component in your model (similar to the same action in the Components dialog), so it’s a helpful method for working with proxy models. And if your component was downloaded from 3D Warehouse, you can also use the context-click to quickly access its 3DWH details page.
Generate Report 2.0:
- The new Generate Report feature allows you to choose which attributes are exported (including a new attribute for capturing quantities), assign an order for the columns in your report, and specify a units format. You can even save your formatted report as a reporting template, to speed the process of re-running the same reports as the design changes.
Enhanced inferencing and tool improvements:
Learning and utilizing SketchUp’s inference engine makes for fast and precise modeling. In this release, we’ve oiled that engine to provide slicker inferencing and locking across the board. This improvement is actually an entire set of smart tweaks we’ve made to inferencing and locking. Here’s a brief description of what’s new:
Improved Parallel and Perpendicular Inferences:
- We’ve improved parallel and perpendicular inference display along with the ability to force the last referenced edge or plane (depending on tool) with the down arrow. This is particularly handy for drawing extending edges on off-axis planes. Now when you are using the parallel and perpendicular inferences, sketchUp will highlight in magenta, the entity which direction is based off of. Also keep an eye out for the new “Extend Edge” tooltip with magenta highlighting when extending lines with the pencil tool.
Expanded Arrow Key locking:
- More tools now allow the use of arrow keys to quickly lock to a direction or plane. Each arrow key corresponds to a lockable color. Right = Red, Left = Green, Up = Blue, Down = Magenta. Additionally, you can now lock normals or rotation axis or surface normals prior to first click for tools that leverage a protractor or create a surface. These tools include Arc/Pie, Rotated Rectangle, Rotation, Protractor, Polygon, Circle and the Section Plane tool.
Arc/circle:
- SketchUp will now easily inference circle and arc centers. While we were at it, we improved SketchUp’s ability to visualize arc endpoints. Another bonus, you can now change the number of segments using new modifier keys (check out the status bar right after you’ve drawn an arc/circle).
Axes tool flexibility: A small but useful change: when changing axes orientation, you can now toggle through the exact axes you’d like to pick first using the Alt (PC)/Command (Mac) modifier.
Inference hidden, active section planes:
SketchUp will now recognize intersection points with hidden section planes. This functionality extends to snapping to elements of a SketchUp model in LayOut too: pay attention for a new inference tip “Intersection with Hidden Section.”:
- Miscellaneous improvements: We’ve also tweaked the Move, Protractor, Offset, and Rotate tools with miscellaneous improvements to improve usability and close up a few loose ends. Additional improvements are identified in the “Tools” and “Inferencing” sections below.
Customizeable Utility Trays on Windows:
- On Windows machines, we’ve re-worked SketchUp’s floating utility dialogs (Styles, Scenes, Components, etc.) so that they neatly stack inside customizable, completely collapsible trays. This functionality also allows you to group dialogs that you may often use at the same time, and is incredibly useful for hiding, browsing, and revealing your go-to utilities.
Refreshed Textures:
- Textures make your models pop off the screen (and the page). In this release, we’ve reworked our default material libraries, adding contemporary textures and entirely new categories.
Support for High DPI Graphics:
- We’re now rendering all of SketchUp, LayOut, and Style Builder toolbar and cursor icons from vector graphics. This means they will scale well for a variety of resolution settings, with a much cleaner look and better sized icons on High DPI screens in particular.
Extensions Loading Policy:
- SketchUp now has three different Extension policies you can select that affect what extensions can and cannot be loaded when SketchUp starts. Starting with SketchUp 2016, Registered Extension Developers can claim their software by signing it digitally, saying “I made this”, but in a secure coded format. The three extension loading modes correspond to this digital signature that Registered Extension Developers add to their extension
- “Identified Extensions Only” mode means that SketchUp will only load extensions that have been signed by one of our Registered Developers
- “Approve Unidentified Extensions” will load all signed extensions, and pop up an approval dialog window on startup that that lets you manually select which unsigned extensions you would like to load
- “Unrestricted” mode will load all extensions, signed or unsigned. You can use this mode to continue to load old extensions that have not yet been signed by their author
- Visit the Help Center article for more information
Welcome Dialog Refresh:
- We’ve given our Welcome Dialog a refresh for SketchUp 2016. Everything works mostly the same, but we’re happy to say that the “Start SketchUp” button is bigger than ever!
Knowledge Center Update:
- Our Knowledge Center has been rewritten and redesigned for this release. Content is now organized in a hierarchy of “books” that focuses on learning SketchUp’s tools in the context of using SketchUp
Support for El Capitan and Windows 10:
- Our QA team has smashed and banged on these new operating systems enough to say that SketchUp 2016 is fully compatible with Apple’s El Capitan and Microsoft’s Windows 10
BUG FIXES/SMALL IMPROVEMENTS:
In addition to the above, we’ve been heads down fixing bugs and adding some smaller features:
Stability:
- Fixed a crash that could occur when importing an image into a model that had a corrupt image (0x0 size)
- Fixed a crash that could occur when auto-folding certain geometry
- Fixed a crash that could occur when copy/pasting geometry or closing models. This crash is caused by component instances that have bad definitions. We added a validity check to catch and repair this condition, so if you are crashing, especially on copy/paste, please go to Model Info > Statistics > Fix Problems to see if SketchUp finds and fixes an issue related to component instances
- Fixed a crash that could occur when downloading a model from the 3D Warehouse by clicking on buttons rapidly
- Fixed a crash that could occur when moving geometry and toggling auto-fold
- Fixed a crash that could occur when changing arc segments in Entity Info. Added a new message to indicate if the number of segments is too large for a given angle and radius when changing arc segments in Entity Info
- Fixed a specific case in which a file could not be saved or fixed with a validity check related to a bad component. This led to a crash when closing the file
- Added a validity check to detect and fix components that have duplicate definition names (which can cause bugs/crashes when doing other things in SketchUp)
- Many “under the hood” changes to resolve warnings and improve product stability
- (Mac) Fixed a crash that could occur when closing a file in SketchUp Viewer
- (Mac) Fixed a crash that could occur when undoing the pasting of certain components
- (Mac) Fixed a crash that could occur when opening and closing multiple large models
- (Mac) Fixed a hang that occur when closing the “Warning - Scenes and Styles” dialog
Performance:
- Improved the performance of Stamp and Drape and other operations where geometry is intersected
- Improved the performance of erasing entities within groups in large models
- Improved the performance of undoing changes to geometry
Trimble Connect:
- Located underneath the File menu on both Windows and Mac
- Requires use of a Google account to access Trimble Connect (either a Gmail account or an email associated with Google will work)
Generate Report 2.0 (New!):
- The Metric system is now supported
- The ability to choose and order the report columns has been added
- One or more reports can now be saved with a model as a template for future use. Templates can also be duplicated and edited as needed
- The ability to filter based on component levels has been added
Notes:
- Generate Report is a Pro only feature
- You must be online for the new version of Generate Report to work. Offline users will see the older versio
- Users with Internet Explorer 8 Installed will see the older version of Generate Report. Upgrade IE to version 9 or newer for best results
3D Warehouse:
Made the following UI changes:
- Added a Window > 3D Warehouse menu item
- Renamed the *Get Models* button to *3D Warehouse”
- Added a new “3D Warehouse” component context sub-menu
- Moved the “Share Component” menu item to be under the new “3D Warehouse” component context sub-menu
- Fixed an issue where Unicode characters were not always maintained/404 errors were issued when downloading models with Unicode definition names/file names from 3D Warehouse
- Fixed an issue where an uploaded model could get out of sync with the model saved to disk - we now require that a model be saved before uploading
Made the following set of changes to retain a component’s definition name and original filename when uploading and downloading models from 3D Warehouse and when importing and exporting components locally:
- When downloading components from 3D Warehouse, SketchUp now retains the component’s original definition name and description (if defined) vs using the model’s 3D Warehouse title and description
- Changed SketchUp to remember the definition name of components on import vs overwriting the definition name with the component’s filename
- Added a Name field to Model Info > File to allow a user to directly specify the model’s name which will become the component’s definition name if that model is inserted as a component from 3D Warehouse or directly imported as a component
- When using the context Save As menu to save a component, SketchUp suggests the component’s original filename (if known) vs suggesting the component’s definition name
- Added the ability to upload the current model via the Upload Model command that is visible within the 3D Warehouse dialog (Window > 3D Warehouse > User menu)
- (Mac) Fixed an issue where a suffix could be appended to the definition name of downloaded components
Tools:
- Fixed an issue with the 2 Point Arc tool in which an arc endpoint could be misplaced when drawing in small dimensions. An excess line was created
- Fixed an issue where the edges were not removed when creating a fillet if the arc endpoint ended on another endpoint
- Fixed an issue where Arc and Pie detent radius tooltips were only displayed when parallel to an axis
- Fixed a cosmetic issue with the Arc and Pie tool drawing lines were hard-coded black and not using colors style-specific colors
- Fixed a cosmetic issue in which the Rotated Rectangle, Arc, and Pie cursors were not updating based on clicks or typing values in the VCB (Measurements toolbar)
- Fixed an issue where the Rotated Rectangle protractor was not displayed with dotted lines when on a back edge
- Fixed a cosmetic issue with the Rotated Rectangle tool where a line could remain while locking to an axis using the arrow keys
- Fixed an issue in which an edge could not be directly extended when the edge was too close to an axis line. With this fix, the more you zoom in, the smaller this snapping tolerance becomes allowing you to extend an edge easier and eliminate undesired snapping of edges to axes during tracing
- Fixed a crash with the Rotate tool when using Ctrl/Option in between typing in values in the VCB (Measurements toolbar)
- Updated status bar for Paint Bucket to identify modifier keys for sampling materials
- Changed the hotspot for the Eraser tool to be smaller
- Fixed an issue where, when performing two offsets with manually selected items, the first offset could be undone
- Added new modifier keys to lock just protractor orientation for Rotate and Protractor tools
- Fixed an issue where pressing Shift would release a constraint that was locked using an arow key
- Fixed an issue where an invalid input in the VCB (Measurements toolbar) broke the copy mode
Inferencing:
- Improved consistency across drawing tools with using shift to lock through different point inferences (including endpoints, midpoints, arc centers, and guide points). This functionality is new to several tools
- Added inferencing when using the rotation handles within the Move tool
- Fixed an issue in which inference points could not always be found with the Move tool for points that were off of the gluing surface for glued groups or components. Expanded the list of inference types that can be found for this case
- Fixed an issue in which an incorrect parallel inference was found after undoing a rotation or move
- Fixed an issue in which an incorrect parallel inference was found after rotating an edge that was in a group or component
- Fixed an issue in which an incorrect parallel/perpendicular inference was found when editing a group or component and inferencing an edge of a rotated group or component
- Fixed an issue where Arc and Pie could show a parallel inference for a non-parallel edge
- Fixed an issue where the Circle and Polygon tools showed axis inferences when it wasn’t possible
- Fixed an issue in which a perpendicular inference couldn’t be found for Circle, Polygon, Rotate, and Protractor if the reference edge wasn’t parallel to the xy plane
- Updated protractor-based tools (e.g. Arc, Pie) and Circle/Polygon to ensure consistency with using shift to lock to a plane before first click instead of just locking orientation in some cases
- Fixed an issue in which Arc and Pie did not draw in the correct plane when using shift before first click
- Fixed an issue where the Rotated Rectangle tool was not showing Intersection, Guide Point, and On Face inferences
- Fixed an issue where the Arc and Pie tools were not showing Intersection inferences after first click
- Improved inferencing with Protractor tool while outside of a component/group
- Fixed an issue where the Center of a Circle could not be found when the Circle was contained within a Group
- Added arc segment “Midpoint” inferences and updated the actual arc midpoint to “Arc Midpoint”
- Fixed an issue where midpoints on Polygon segments could not be found if Polygon was split by an edge
- Fixed an issue where the Rotated Rectangle, Arc, and Pie tools were not always showing From Point inferencing along an axis
- Fixed a cosmetic issue where the Tape Measure, Rotate, and Protractor lines did not turn magenta when parallel/perpendicular to an edge
- Fixed a cosmetic issue where a magenta, dotted line was not drawn between the first and third points of a 3 Point Arc when parallel/perpendicular to an edge
- Fixed a cosmetic issue where the Circle and Polygon radii were not turning bold when locked to an inference using shift
- Fixed a cosmetic issue with the 2 Point and 3 Point Arc tools where the drawing line could change appearance when locked using shift
Support for High DPI Graphics:
- User may see graphics on certain Ruby Extensions that look small or low resolution, as the author for the extension may not have updated their graphics (Vector based graphics) to support High DPI yet.
Operating systems: El Capitan & Win 10:
- (Mac) Fixed an issue where importing Classifications was very slow
- (Mac) Fixed an issue where exporting 3D formats took an exorbitant amount of time
- (Mac) Fixed an issue where the original file was not visible in Finder (or on the Desktop) after saving a file a second time
- (Mac) Fixed a crash that could occur when closing SketchUp in Full Screen Mode using the Red X or Command+W to close the window
- (Mac) Changed SketchUp to now correctly save files with the “staff” group vs the “wheel” group
Fonts / 3D Text:
(Mac) The Fonts dialog was refactored to fix the following:
- Fixed an issue in which a fixed height text size could not be set. The height changes were applied as a font point size change
- Fixed an issue in which the height option was not working for Dimensions
- Fixed an issue in which 3D Text dialog did not always remember the last used typeface
- Fixed an issue in which the 3D Text dialog was resulting in 100% cpu usage while the dialog was open
- Provided a more complete fix for a crash on Yosemite when the dialog was opened
- (Mac) Fixed an issue where 3D Text could not be placed after clicking on a component in the Components browser
Entity Info:
- (Mac) Fixed an issue where Entity Info could sometimes get stuck at the top of your display window or be taller than expected
- (Mac) Fixed an issue where Entity Info could grow in size after SketchUp crashed
- (Mac) Fixed an issue in the Entity Info dialog where the "Text Position" and Endpoints" labels were swapped for linear dimensions
Miscellaneous:
- We removed the EULA license agreement from the installer. It is now displayed and must be agreed to at first launch by each unique user
- Changed SketchUp to display the major version number in the title bar
- Created new templates featuring Lisanne, one of our cheerful Customer Support representatives
- Fixed an issue where exploding components sometimes unsoftened softened edges
- Fixed an issue where hiding dialogs/minimizing SU smoothed/unsmoothed selected geometry
- Changed the Create Component dialog to remember what was last checked in the "replace selection with component" check box
- Fixed an issue where panning did not work in models with only construction points (e.g. point cloud models)
- Fixed an issue where a blank component definition name could be added in the Create Component dialog
- Changed the section slice DWG exporter to export the model units (vs always exporting inches)
Renamed the Geo-location functionality in SketchUp to be more generic including:
- renaming the location layers to “Location Terrain” and “Location Snapshot”
- renaming the “Google” toolbar to “Location”
- removing the “Preview in Google Earth” button. Note: models can still be previewed in Google Earth by exporting them to the kmz format
- Added the ability to extend expiring (single-user) Enterprise licenses without a user needing to re-license SU
- Improved parsing of classification schema
- Added classification information to Model Info > Statistics
- Fixed an issue where the Aspect Ratio value chosen for animation exports was not saved between sessions
- Fixed a number of translation and truncation errors in our localized builds
- (Mac) Fixed an issue where textures created on Windows could not be edited via the "Edit Texture Image" context menu
- (Mac) Fixed an issue where the text seen when renaming a scene via right clicking on a scene tab was tiny on Retina displays
- (Mac) Fixed an issue where users were able to create duplicate named scenes in the Scenes dialog
- (Mac) Renamed the preference that checks for Software Updates in Preferences > General to “Allow checking for updates” to better reflect what the preference does
- (Mac) Increased the time interval that SU uses when it does a check to determine if you are online
更新時間：2015-02-06
更新細節：
What's new in this version:
General Fixes:
- Fixed an issue where the Dynamic Components and Classified badges were not always visible for online models in the Components browser.
- Fixed an issue where the Component browser was showing an older model version than when downloading the component in a browser.
- Fixed an issue where a Rotated Rectangle would incorrectly rotate when entering a length/width without an angle.
- Changed the SketchUp Pro title bar to show trial days remaining when in a trial.
- Windows: fixed an issue where thumbnails of SketchUp models were not visible in Windows Explorer on some machines.
- Windows: fixed an issue where links on the Learn tab of the Welcome dialog wouldn’t open in a user’s default browser.
- Mac: fixed an issue on Yosemite where month abbreviations did not fit in the Shadows dialog.
- Mac: fixed an issue where Ruby tool icons could turn into an icon of a green zombie when the Ruby extension was removed or disabled.
- Localization: various fixes for incorrect translations and truncated translations.
Stability Improvements:
- Fixed a crash with the Push/Pull tool when using the VCB after pushing a face up twice, selecting undo, and then selecting the face.
- Fixed a crash with the Push/Pull tool in a particular case when double clicking to repeat an operation and using the VCB.
- Fixed a crash with the Offset tool when using the VCB after offsetting certain faces.
- Fixed a crash that could occur in the Move tool when toggling on auto-fold during a copy.
- Fixed a crash when exporting certain models with text to an animation.
- Fixed a crash when exporting certain models with different style changes between scenes to an animation.
- Fixed a crash when drawing lines connecting vertices in extremely large geometry.
- Mac: fixed a crash when using Outliner to drag a component into another component which has subcomponents and is not yet expanded.
- Mac: fixed a crash when switching to another application during an animation export.
- Windows: fixed a crash that could occur on some machines when using Windows Explorer to view SketchUp models.
- Windows: fixed a crash that could occur in certain complex models when exporting to .3ds, .obj, .xsi, or vrml file types.
- Windows: fixed a crash when inserting certain components, undoing the insert, and pressing Escape while trying to drag/drop the component again. Exporter and Importer Improvements:
- IFC: added the ability to export transparent materials.
- IFC: added the ability to export geometry that was classified as IfcSite, IfcBuilding, or IfcBuildingStorey.
LayOut Release Notes General Fixes:
- Fixed a bug on Windows related to particular fonts of symbol character sets (as opposed to ANSI) not properly rendering. We updated a text library to add support for symbol character sets, e.g., Flux Architect.
- Fixed a bug with exploding labels and dimensions, where auto-text wouldn't work anymore after undoing the explode.
- We put in a fix that changes the horizontal constrainment behavior of the label leader. The label tool will now constrain the second leader line to horizontal. Previously, the user needed to hold Shift to constrain to horizontal.
- Fixed a dwg export issue that would cause some templates to export with a landscape orientation when portrait was expected and vice versa.
- Fixed a bug where window restoration would interfere with LayOut's ability to show the recovered files at launch after a crash.
- Fixed a Yosemite bug where LO's font panel accessory view wouldn't be correctly initialized when the font panel was restored (if previously open when LO quit).
- Fixed a bad German translation for the text that appears in the delete layers dialog.
- Fixed a bug that prevented the version number from showing in the About dialog for some localized versions of Style Builder.