MySQL (64-bit) 歷史版本列表
更新時間：2012-03-26
更新細節：
What's new in this version:
Functionality Added or Changed:
- InnoDB Storage Engine: A deprecation warning is now issued when --ignore-builtin-innodb is used.
- yaSSL was upgraded from version 1.7.2 to 2.2.0.
Bugs Fixed:
- Important Change: InnoDB Storage Engine: When a row grew in size due to an UPDATE operation, other (non-updated) columns could be moved to off-page storage so that information about the row still fit within the constraints of the InnoDB page size. The pointer to the new allocated off-page data was not set up until the pages were allocated and written, potentially leading to lost data if the system crashed while the column was being moved out of the page. The problem was more common with tables using ROW_FORMAT=DYNAMIC or ROW_FORMAT=COMPRESSED along with the Barracuda file format, particularly with the innodb_file_per_table setting enabled, because page allocation operations are more common as the .ibd tablespace files are extended. Still, the problem could occur with any combination of InnoDB version, file format, and row format. A related issue was that during such an UPDATE operation, or an INSERT operation that reused a delete-marked record, other transactions could see invalid data for the affected column, regardless of isolation level. The fix corrects the order of operations for moving the column data off the original page and replacing it with a pointer. Now if a crash occurs at the precise moment when the column data is being transferred, the transfer will not be re-run during crash recovery. In MySQL 5.1, this fix applies to the InnoDB Plugin, but not the built-in InnoDB storage engine.
- InnoDB Storage Engine: An erroneous assertion could occur, in debug builds only, when creating an index on a column containing zero-length values (that is, '').
- InnoDB Storage Engine: A DDL operation such as ALTER TABLE ... ADD COLUMN could stall, eventually timing out with an Error 1005: Can't create table message referring to fil_rename_tablespace.
- InnoDB Storage Engine: A DDL operation for an InnoDB table could cause a busy MySQL server to halt with an assertion error: InnoDB: Failing assertion: trx->error_state == DB_SUCCESS The error occurred if the DDL operation was run while all 1023 undo slots were in use by concurrent transactions. This error was less likely to occur in MySQL 5.5 and 5.6, because raising the number of InnoDB undo slots increased the number of simultaneous transactions (corresponding to the number of undo slots) from 1K to 128K.
- InnoDB Storage Engine: Server startup could produce an error for temporary tables using the InnoDB storage engine, if the path in the $TMPDIR variable ended with a / character. The error log would look like:
120202 19:21:26 InnoDB: Operating system error number 2 in a file operation.
InnoDB: The error means the system cannot find the path specified.
InnoDB: If you are installing InnoDB, remember that you must create
InnoDB: directories yourself, InnoDB does not create them.
120202 19:21:26 InnoDB: Error: trying to open a table, but could not
InnoDB: open the tablespace file './t/#sql7750_1_0.ibd'!
InnoDB: Have you moved InnoDB .ibd files around without using the
InnoDB: commands DISCARD TABLESPACE and IMPORT TABLESPACE?
InnoDB: It is also possible that this is a temporary table #sql...,
InnoDB: and MySQL removed the .ibd file for this.
The workaround for the problem was to create a similar temporary table again, copy its .frm file to tmpdir under the name mentioned in the error message (for example, #sql123.frm) and restart mysqld with tmpdir set to its normal value without a trailing slash, for example /var/tmp. On startup, MySQL would see the .frm file and issue DROP TABLE for the orphaned temporary table.
- Replication: Statements that wrote to tables with AUTO_INCREMENT columns based on an unordered SELECT from another table could lead to the master and the slave going out of sync, as the order in which the rows are retrieved from the table may differ between them. Such statements include any INSERT ... SELECT, REPLACE ... SELECT, or CREATE TABLE ... SELECT statement. Such statements are now marked as unsafe for statement-based replication, which causes the execution of one to throw a warning, and forces the statement to be logged using the row-based format if the logging format is MIXED.
- The contents of the shared and shared-compat RPM packages had been changed in versions 5.5.6 and 5.6.1 to avoid the overlap which they traditionally had (and still have in MySQL 5.0 and 5.1). However, the RPM meta information had not been changed in accordance, and so RPM still assumed a conflict between shared and shared-compat RPM packages. This has been fixed.
- myisam_sort_buffer_size could not be set larger than 4GB on 64-bit systems.
- Due to improper locking, concurrent inserts into an ARCHIVE table at the same time as repair and check operations on the table resulted in table corruption.
更新時間：2012-02-21
更新細節：
What's new in this version:
Functionality Added or Changed:
- A new CMake option, MYSQL_PROJECT_NAME, can be set on Windows or Mac OS X to be used in the project name.
Bugs Fixed:
- Performance: InnoDB Storage Engine: Memory allocation for InnoDB tables was reorganized to reduce the memory overhead for large numbers of tables or partitions, avoiding situations where the “resident set size” could grow regardless of FLUSH TABLES statements. The problem was most evident for tables with large row size. Some of the memory that was formerly allocated for every open table is now allocated only when the table is modified for the first time.
- Incompatible Change: An earlier change (in MySQL 5.1.62 and 5.5.21) was found to modify date-handling behavior in General Availability-status series (MySQL 5.1 and 5.5). This change has been reverted. The change was that several functions became more strict when passed a DATE() function value as their argument, thus they rejected incomplete dates with a day part of zero. These functions were affected: CONVERT_TZ(), DATE_ADD(), DATE_SUB(), DAYOFYEAR(), LAST_DAY(), TIMESTAMPDIFF(), TO_DAYS(), TO_SECONDS(), WEEK(), WEEKDAY(), WEEKOFYEAR(), YEARWEEK(). The previous behavior has been restored.
- InnoDB Storage Engine: A Valgrind error was fixed in the function os_aio_init().
- InnoDB Storage Engine: The server could crash when creating an InnoDB temporary table under Linux, if the $TMPDIR setting points to a tmpfs filesystem and innodb_use_native_aio is enabled, as it is by default in MySQL 5.5.4 and higher. The entry in the error log looked like: 101123 2:10:59 InnoDB: Operating system error number 22 in a file operation. InnoDB: Error number 22 means 'Invalid argument'. The crash occurred because asynchronous I/O is not supported on tmpfs in some Linux kernel versions. The workaround was to turn off the innodb_use_native_aio setting or use a different temporary directory. The fix causes InnoDB to turn off the innodb_use_native_aio setting automatically if it detects that the temporary file directory does not support asynchronous I/O.
- InnoDB Storage Engine: References to C preprocessor symbols and macros HAVE_purify, UNIV_INIT_MEM_TO_ZERO, and UNIV_SET_MEM_TO_ZERO were removed from the InnoDB source code. They were only used in debug builds instrumented for Valgrind. They are replaced by calls to the UNIV_MEM_INVALID() macro.
- InnoDB Storage Engine: The MySQL server could halt with an assertion error: InnoDB: Failing assertion: page_get_n_recs(page) > 1 Subsequent restarts could fail with the same error. The error occurred during a purge operation involving the InnoDB change buffer. The workaround was to set the configuration option innodb_change_buffering=inserts.
- InnoDB Storage Engine: With 1024 concurrent InnoDB transactions running concurrently and the innodb_file_per_table setting enabled, a CREATE TABLE operation for an InnoDB table could fail. The .ibd file from the failed CREATE TABLE was left behind, preventing the table from being created later, after the load had dropped. The fix adds error handling to delete the erroneous .ibd file. This error was less likely to occur in MySQL 5.5 and 5.6, because raising the number of InnoDB undo slots increased the number of simultaneous transactions needed to trigger the bug, from 1K to 128K.
- Replication: Executing mysqlbinlog with the --start-position=N option, where N was equal either to 0 or to a value greater than the length of the dump file, caused it to crash. This issue was introduced in MySQL 5.5.18 by the fix for Bug #32228 and Bug #11747416.
- Replication: On Windows replication slave hosts, STOP SLAVE took an excessive length of time to complete when the master was down.
- A query that used an index on a CHAR column referenced in a BETWEEN clause could return invalid results.
- Expressions that compared a BIGINT column with any non-integer constant were performed using integers rather than decimal or float values, with the result that the constant could be truncated. This could lead to any such comparison that used <, >, <=, >=, =, !=/<>, IN, or BETWEEN yielding false positive or negative results.
- When the optimizer performed conversion of DECIMAL values while evaluating range conditions, it could produce incorrect results.
- When running mysqldump with both the --single-transaction and --flush-logs options, the flushing of the log performed an implicit COMMIT (see Section 12.3.3, “Statements That Cause an Implicit Commit”), causing more than one transaction to be used and thus breaking consistency.
- It was possible in the event of successive failures for mysqld_safe to restart quickly enough to consume excessive amounts of CPU. Now, on systems that support the sleep and date system utilities, mysqld_safe checks to see whether it has restarted more than 5 times in the current second, and if so, waits 1 second before attempting another restart.
- When used with the --xml option, mysqldump --routines failed to dump any stored routines, triggers, or events.
- It was possible on replication slaves where FEDERATED tables were in use to get timeouts on long-running operations, such as Error 1160 Got an error writing communication packets. The FEDERATED tables did not need to be replicated for the issue to occur.
- If an attempt to initiate a statement failed, the issue could not be reported to the client because it was not prepared to receive any error messages prior to the execution of any statement. Since the user could not execute any queries, they were simply disconnected without providing a clear error. After the fix for this issue, the client is prepared for an error as soon as it attempts to initiate a statement, so that the error can be reported prior to disconnecting the user.
- Using myisamchk with the sort recover method to repair a table having fixed-width row format could cause the row pointer size to be reduced, effectively resulting in a smaller maximum data file size.
- On Windows, the server incorrectly constructed the full path name of the plugin binary for INSTALL PLUGIN and CREATE FUNCTION ... SONAME.
- The stored routine cache was subject to a small memory leak that over time or with many routines being used could result in out-of-memory errors.
更新時間：2012-01-13
更新細節：
What's new in this version:
Bugs Fixed:
- Important Change: Replication: Setting an empty user in a CHANGE MASTER TO statement caused an invalid internal result and is no longer permitted. Trying to use MASTER_USER='' or setting MASTER_PASSWORD while leaving MASTER_USER unset causes the statement to fail with an error.
- Important Change: Replication: Moving the binary log file, relay log file, or both files to a new location, then restarting the server with a new value for --log-bin, --relay-log, or both, caused the server to abort on start. This was because the entries in the index file overrode the new location. In addition, paths were calculated relative to datadir (rather than to the --log-bin or --relay-log values). The fix for this problem means that, when the server reads an entry from the index file, it now checks whether the entry contains a relative path. If it does, the relative part of the path is replaced with the absolute path set using the --log-bin or --relay-log option. An absolute path remains unchanged; in such a case, the index must be edited manually to enable the new path or paths to be used.
- InnoDB Storage Engine: When doing a live downgrade from MySQL 5.6.4 or later, with innodb_page_size set to a value other than 16384, now the earlier MySQL version reports that the page size is incompatible with the older version, rather than crashing or displaying a “corruption” error.
- InnoDB Storage Engine: Issuing INSERT...ON DUPLICATE KEY statements for InnoDB tables from concurrent threads could cause a deadlock, particularly with the INSERT...ON DUPLICATE KEY UPDATE form. The fix avoids deadlocks caused by the same row being accessed by more than one transaction. Deadlocks could still occur when multiple rows are inserted and updated simultaneously by different transactions in inconsistent order; those types of deadlocks require the standard error handling on the application side, of re-trying the transaction.
- An incorrect InnoDB assertion could cause the server to halt. This issue only affected debug builds. The assertion referenced the source file btr0pcur.ic and the variable cursor->pos_state.
- Locale information for FORMAT() function instances was lost in view definitions.
- The handle_segfault() signal-handler code in mysqld could itself crash due to calling unsafe functions.
- Enabling myisam_use_mmap could cause the server to crash.
- Concurrent access to ARCHIVE tables could cause corruption.
更新時間：2011-12-09
更新細節：
What's new in this version:
Bugs Fixed
- InnoDB Storage Engine: An incorrect deadlock could occur on a server doing a substantial amount of change buffering for DML operations, particularly DELETE statements.
- Rounding DBL_MAX returned DBL_MAX, not 'inf'.
- mysql_upgrade did not upgrade the system tables or create the mysql_upgrade_info file when run with the --write-binlog or --skip-write-binlog option.
- If a plugin was uninstalled, thread local variables for plugin variables of string type with wth PLUGIN_VAR_MEMALLOC flag were not freed.
- Deadlock could occur when these four things happened at the same time: 1) An old dump thread was waiting for the binary log to grow. 2) The slave server that replicates from the old dump thread tried to reconnect. During reconnection, the new dump thread tried to kill the old dump thread. 3) A KILL statement tried to kill the old dump thread. 4) An INSERT statement caused a binary log rotation.
更新時間：2011-11-21
更新細節：
What's new in this version:
Bugs Fixed:
* Incompatible Change: Replication: The statements in the following list are now marked as unsafe for statement-based replication. This is due to the fact that each of these statements depends on the results of a SELECT statement whose order cannot always be determined. When using STATEMENT logging mode, a warning is issued in the binary log for any of these statements; when using MIXED logging mode, the statement is logged using the row-based format.
- INSERT ... SELECT ... ON DUPLICATE KEY UPDATE
- REPLACE ... SELECT
- CREATE TABLE ... IGNORE SELECT
- CREATE TABLE ... REPLACE SELECT
- INSERT IGNORE ... SELECT
- UPDATE IGNORE
When upgrading, you should note the use of these statements in your applications, keeping in mind that a statement that inserts or replaces rows obtained from a SELECT can take up many times as much space in the binary log when logged using row-based format than when only the statement itself is logged. Depending on the number and size of the rows selected and inserted (or replaced) by any such statements, the difference in size of the binary log after the logging of these statements is switched from statement-based to row-based can potentially be several orders of magnitude. See Section 15.1.2.1, “Advantages and Disadvantages of Statement-Based and Row-Based Replication”.
* Replication: A replication master could send damaged events to slaves after the binary log disk on the master became full. To correct this issue, only complete events are now pushed by the master dump thread to the slave I/O thread. In addition, the error text that the master sends to the slave when an incomplete event is found now states that the incomplete event may have been caused by running out of disk space on the master, and provides coordinates of the first and the last event bytes read.
* mysql_plugin mishandled the --plugin-ini, --mysqld, and --my-print-defaults options under some circumstances.
* mysql_plugin returned the wrong error code from failed server bootstrap execution.
* Several improvements were made to the libedit library bundled with MySQL distributions, and that is available for all platforms that MySQL supports except Windows.
- Navigation keys did not work for UTF-8 input.
- Word navigation and delete operations did not work for UTF-8 input with Cyrillic characters.
- Nonlatin characters were corrupted in overwrite mode for UTF-8 input.
- Long queries caused the statement history file to become corrupted.
- The Alt key caused history operations to fail.
* ARCHIVE tables with NULL columns could cause server crashes or become corrupt under concurrent load.
* OPTIMIZE TABLE could corrupt MyISAM tables if myisam_use_mmap was enabled.
* A query that selected a GROUP_CONCAT() function result could return different values depending on whether an ORDER BY of the function result was present.
* For FEDERATED tables, loss of connection to the remote table during some insert
更新時間：2011-10-22
更新細節：
What's new in this version:
Bugs Fixed :
- InnoDB Storage Engine: This fix improves the performance of instrumentation code for InnoDB buffer pool operations.
- InnoDB Storage Engine: Data from BLOB columns could be lost if the server crashed at a precise moment when other columns were being updated in an InnoDB table.
- InnoDB Storage Engine: Lookups using secondary indexes could give incorrect matches under a specific set of conditions. The conditions involve an index defined on a column prefix, for a BLOB or other long column stored outside the index page, with a table using the Barracuda file format.
- InnoDB Storage Engine: This fix corrects cases where the MySQL server could hang or abort with a long semaphore wait message. (This is a different issue than when these symptoms occurred during a CHECK TABLE statement.)
- Internal conversion of zero to binary and back could yield a result with incorrect precision.
- Valgrind warnings generated by filesort operations were fixed.
- mysqld_safe did not properly check for an already running instance of mysqld.
- The help message for mysql_install_db did not indicate that it supports the --defaults-file, --defaults-extra-file and --no-defaults options.
- An assertion designed to detect zero-length sort keys also was raised when the entire key set fit in memory.
- myisampack could create corrupt FULLTEXT indexes when compressing tables.
- A linking problem prevented the FEDERATED storage engine plugin from loading.
更新時間：2011-09-16
更新細節：
What's new in this version:
Bugs Fixed:
- InnoDB Storage Engine: The “random read-ahead” feature that was removed from the InnoDB Plugin is now available again. Because it is only helpful for certain workloads, it is turned off by default. To turn it on, enable the innodb_random_read_ahead configuration option. Because this feature can improve performance in some cases and reduce performance in others, before relying on this setting, benchmark both with and without the setting enabled.
- The metadata locking subsystem added too much overhead for INFORMATION_SCHEMA queries that were processed by opening only .frm or .TRG files and had to scan many tables. For example, SELECT COUNT(-) FROM INFORMATION_SCHEMA.TRIGGERS was affected.
- Compilation failed on Mac OS X 10.7 (Lion) with a warning: Implicit declaration of function 'pthread_init'
- With profiling disabled or not compiled in, set_thd_proc_info() unnecessarily checked file name lengths.
- A DBUG_ASSERT added by Bug #11792200 was overly aggressive in raising assertions.
- CHECK TABLE and REPAIR TABLE failed to find problems with MERGE tables that had underlying tables missing or with the wrong storage engine. Issues were reported only for the first underlying table.
- Replication: Processing of corrupted table map events could cause the server to crash. This was especially likely if the events mapped different tables to the same identifier, such as could happen due to Bug#56226. Now, before applying a table map event, the server checks whether the table has already been mapped with different settings, and if so, an error is raised and the slave SQL thread stops. If it has been mapped with the same settings, or if the table is set to be ignored by filtering rules, there is no change in behavior: the event is skipped and IDs are not checked.
- For a lower_case_table_names value of 1 or 2 and a database having a mixed-case name, calling a stored function using a fully qualified name including the database name failed.
- Previously, Performance Schema table columns that held byte counts were BIGINT UNSIGNED. These were changed to BIGINT (signed). This makes it easier to perform calculations that compute differences between columns.
- The embedded server crashed when argc = 0.
- The mysql_affected_rows() C API function returned 3 (instead of 2) for INSERT ... ON DUPLICATE KEY UPDATE statements where there was a duplicated key value.
- Upgrades using an RPM package recreated the test database, which is undesirable when the DBA had removed it.
更新時間：2011-07-28
更新細節：
What's new in this version:
Bugs Fixed:
- InnoDB Storage Engine: A failed CREATE INDEX operation for an InnoDB table could result in some memory being allocated and not freed. This memory leak could affect tables created with the ROW_FORMAT=DYNAMIC and ROW_FORMAT=COMPRESSED settings.
- Partitioning: Auto-increment columns of partitioned tables were checked even when they were not being written to. In debug builds, this could lead to a crash of the server.
- Partitioning: The UNIX_TIMESTAMP() function was not treated as a monotonic function for purposes of partition pruning.
- Replication: If a LOAD DATA INFILE statement—replicated using statement-based replication—featured a SET clause, the name-value pairs were regenerated using a method (Item::print()) intended primarily for generating output for statements such as EXPLAIN EXTENDED, and which cannot be relied on to return valid SQL. This could in certain cases lead to a crash on the slave. To fix this problem, we now name each value in its original, user-supplied form, and use that to create LOAD DATA INFILE statements for statement-based replication.
- Previously, an inappropriate error message was produced if a multiple-table update for an InnoDB table with a clustered primary key would update a table through multiple aliases, and perform an update that may physically move the row in at least one of these aliases. Now the error message is: Primary key/partition key update is not allowed since the table is updated both as 'tbl_name1' and 'tbl_name2'
- ALTER TABLE {MODIFY|CHANGE} ... FIRST did nothing except rename columns if the old and new versions of the table had exactly the same structure with respect to column data types. As a result, the mapping of column name to column data was incorrect. The same thing happened for ALTER TABLE DROP COLUMN, ADD COLUMN statements intended to produce a new version of table with exactly the same structure as the old version.
- Incorrect handling of metadata locking for FLUSH TABLES WITH READ LOCK for statements requiring prelocking caused two problems:
- Execution of any data-changing statement that required prelocking (that is, involved a stored function or trigger) as part of transaction slowed down somewhat all subsequent statements in the transaction. Performance in a transaction that periodically involved such statements gradually degraded over time.
- Execution of any data-changing statement that required prelocking as part of transaction prevented a concurrent FLUSH TABLES WITH READ LOCK from proceeding until the end of transaction rather than at the end of the particular statement.
- The fractional part of the “Queries per second” value in MySQL status output could be displayed incorrectly.
- LOAD DATA INFILE incorrectly parsed relative data file path names that ascended more than three levels in the file system and as a consequence was unable to find the file.
- For MyISAM tables, attempts to insert incorrect data into an indexed GEOMETRY column could result in table corruption.
- In debug builds, Field_new_decimal::store_value() was subject to buffer overflows.
- A race condition between loading a stored routine using the name qualified by the database name and dropping that database resulted in a spurious error message: The table mysql.proc is missing, corrupt, or contains bad data
更新時間：2011-07-06
更新細節：
What's new in this version:
Functionality added or changed:
- CMake configuration support on Linux now provides a boolean ENABLE_GCOV option to control whether to include support for gcov.
- Client programs now display more information for SSL errors to aid in diagnosis and debugging of connection problems.
- In the audit plugin interface, the event_class member was removed from the mysql_event_general structure and the calling sequence for the notification function changed. Originally, the second argument was a pointer to the event structure. The function now receives this information as two arguments: an event class number and a pointer to the event. Corresponding to these changes, MYSQL_AUDIT_INTERFACE_VERSION was increased to 0x0300.
Bugs fixed:
- Replication: A mistake in thread cleanup could cause a replication master to crash.
- Replication: When using row-based replication and attribute promotion or demotion (see Section 15.4.1.6.2, “Replication of Columns Having Different Data Types”), memory allocated internally for conversion of BLOB columns was not freed afterwards.
- Adding support for Windows authentication to libmysql introduced a link dependency on the system Secur32 library. The Microsoft Visual C++ link information was modified to pull in this library automatically.
- In some cases, memory allocated for Query_tables_list::sroutines() was not freed properly.
- After the fix for Bug#11889186, MAKEDATE() arguments with a year part greater than 9999 raised an assertion.
- An assertion could be raised due to a missing NULL value check in Item_func_round::fix_length_and_dec().
- An assertion could be raised during two-phase commits if the binary log was used as the transaction coordinator log.
- A problem introduced in 5.5.11 caused very old (MySQL 4.0) clients to be unable to connect to the server.
- Using CREATE EVENT IF NOT EXISTS for an event that already existed and was enabled caused multiple instances of the event to run.
- An embedded client would abort rather than issue an error message if it issued a TEE command (T file_name) and the directory containing the file did not exist. This occurred because the wrong error handler was called.
- On some platforms, the Incorrect value: xxx for column yyy at row zzz error produced by LOAD DATA INFILE could have an incorrect value of zzz.
- An attempt to install nonexistent files during installation was corrected.
- On FreeBSD 64-built builds of the embedded server, exceptions were not prevented from propagating into the embedded application.
更新時間：2011-06-02
更新細節：
What's new in this version:
Bugs fixed:
- InnoDB Storage Engine: If the server crashed while an XA transaction was prepared but not yet committed, the transaction could remain in the system after restart, and cause a subsequent shutdown to hang.
- InnoDB Storage Engine: Similar problem to the foreign key error in bug #11831040 / 60196 / 60909, but with a different root cause and occurring on Mac OS X. With the setting lower_case_table_names=2, inserts into InnoDB tables covered by foreign key constraints could fail after a server restart.
- Partitioning: The internal get_partition_set() function did not take into account the possibility that a key specification could be NULL in some cases.
- Partitioning: When executing a row-ordered retrieval index merge, the partitioning handler used memory from from that allocated for the table, rather than that allocated to the query, causing table object memory not to be freed until the table was closed.
- Replication: A spurious error malformed binlog: it does not contain any Format_description_log_event... was generated when mysqlbinlog was invoked using --base64-output=decode-row and --start-position=pos, where pos is a point in the binary log past the format description log event. However, there is nothing unsafe about not printing the format description log event, so the error has been removed for this case.
- Replication: Typographical errors appeared in the text of several replication error messages. (The word “position” was misspelled as “postion”.)
- Assignments to NEW.var_name within triggers, where var_name had a BLOB or TEXT type, were not properly handled and produced incorrect results.
- XA COMMIT could fail to clean up the error state if it discovered that the current XA transaction had to be rolled back. Consequently, the next XA transaction could raise an assertion when it checked for proper cleanup of the previous transaction.
- An internal client macro reference was removed from the client_plugin.h header file. This reference made the file unusable.
- The server consumed memory for repeated invocation of some stored procedures, which was not released until the connection terminated.
- The server did not check for certain invalid out of order sequences of XA statements, and these sequences raised an assertion.
- With the conversion from GNU autotools to CMake for configuring MySQL, the USE_SYMDIR preprocessor symbol was omitted. This caused failure of symbolic links (described at Section 7.11.3.1, “Using Symbolic Links”).
- The incorrect max_length value for YEAR values could be used in temporary result tables for UNION, leading to incorrect results.
- In Item_func_in::fix_length_and_dec(), a Valgrind warning for uninitialized values was corrected.
- In ROUND() calculations, a Valgrind warning for uninitialized memory was corrected.
- Valgrind warnings caused by comparing index values to an uninitialized field were corrected.
- LOAD DATA INFILE errors could leak I/O cache memory.
- For LOAD DATA INFILE, multibyte character sequences could be pushed onto a stack too small to accommodate them.
- Internal Performance Schema header files were unnecessarily installed publicly.
- On Linux, the mysql client built using the bundled libedit did not read ~/.editrc.
- The optimizer sometimes incorrectly processed HAVING clauses for queries that did not also have an ORDER BY clause.
- PROCEDURE ANALYZE() could leak memory for NULL results, and could return incorrect results if used with a LIMIT clause.
- With DISTINCT CONCAT(col,...) returned incorrect results when the arguments to CONCAT() were columns with an integer data type declared with a display width narrower than the values in the column. (For example, if an INT(1) column contain 1111.)