Macrium Reflect (32-bit) 歷史版本列表
更新時間：2020-04-23
更新細節：
What's new in this version:
File and Folder Backup:
- We've excluded MS Volume Shadow Copy from participating in backups of removable drives. Previously, a File and Folder backup would report VSS errors before continuing if folders on a removable drive, such as a Flash drive, were included. VSS is not supported on removable media.
MS Exchange:
- Some customers have reported an application crash when running MS Exchange incremental backups. This has been resolved
GPT Disk Layouts:
- We've added an additional check to allow the GPT partition table to contain gaps when loading disk layouts in Reflect. It's possible that GPT partition tables can be non-contiguous if the disk has been formatted or updated using Linux.
Rescue Media:
- To distinguish between multiple Ethernet Adapters with a similar name, the Windows PE Network Adapter dialog now shows the MAC address of each adapter
- Changing the rescue media staging area volume would not always remove all the files on the old volume. This has been resolved
- If a new edition of Reflect is installed, e.g, Workstation to Server, the Rescue Media Builder will now prompt for a rebuild of the rescue media
更新時間：2020-03-26
更新細節：
What's new in this version:
German Language Version Only:
- A program exception could occur when opening the verification dialog. This has been resolved
Macrium Changed Block Tracker (MRCBT):
- CBT could erroneously hang on to volume locks on some systems causing problems with scheduling system volume chkdsk events, USB drive ejection and OneDrive Personal Vault. This has been resolved.
更新時間：2020-03-20
更新細節：
What's new in this version:
Bug fixes and Improvements:
- In response to potential file system corruption issues that could arise from applying some recent Windows Updates, we have reviewed our data integrity checks and implemented new features
Changed Block Tracker:
- We've improved CBT to reset more robustly on System power failure, unexpected shutdown and unexpected device removal.
- Repair option when verifying Image files
- We've added an 'Attempt repair' option when verifying image files. If block corruption is detected and the live file system contains the original data then the block is repaired by replacing with the original data. Block corruption is exceptionally rare but this additional feature is designed to further mitigate file system and storage problems. We've also added an additional command line switch to the standalone verification utility.
- Note: Repair isn't guaranteed and will only be attempted if the originating source volume exists on the system performing the verification
Consolidation:
- We've also added verification and live repair attempt on verification failure for merged blocks during consolidation. If a data block fails verification when read for merging, the live file system is checked for the original block data.
Incremental Deltas:
- It was possible for a damaged Incremental index to go undetected when constructing a full index chain. This was a rare occurrence, but it could propagate further into the backup set. We have enhanced our detection code to prevent this from occurring in future.
Clone and restore:
- Display power saving settings are now honored during Clone and Restore operations. Previously the display would remain on regardless of the Windows settings.
Exchange:
- Exchange delta incs could fail to build if multiple volumes were present for Exchange DB and meta data/log files. This has been resolved.
更新時間：2020-02-19
更新細節：
What's new in this version:
Bug fixes:
Alternative Locations:
- The 'Alternative Locations' functionality could fail to work as expected and attempt to append to backup sets from the alternative location even if the primary location was available. This has been resolved.
Note:
- When a backup runs, If the location contains an orphaned delta Incremental then the text '.error_loading' will be appended to the orphaned file name and the backup will continue. This will be indicated in the backup log as a warning.
更新時間：2020-02-16
更新細節：
What's new in this version:
- Error: 'Error reading Image file'
- Some customers have received 'Error reading Image file' when creating Delta Incremental Images. This has been resolved
- We recommend re-building your rescue media if currently built with v7.2.4711 to ensure compatibility with your backup sets
- Volume detection
- Reflect would fail to recognise file systems formatted on Dynamic volumes spanning disks with 4K sector sizes. This has been resolved
- Rescue Media Builder
- This release resolves a problem starting the rescue environment from the recovery boot created menu with v7.2.4711
- Note: Running either this full installer or patch will automatically correct the current boot menu. If you continue to have problems then please launch RMBuilder and remove/re-add the boot menu
- Moving the PE staging files to a different drive would result in duplication of the bootMacrium sub folder. This has been resolved
- Note: If a corrupt PE staging folder structure is detected by RMBuilder then it will be automatically deleted
更新時間：2020-02-12
更新細節：
What's new in this version:
Delta Index Saving Efficiency:
- We've improved the :efficiency of saving Incrementals with large delta indexes
- Technicians USB
- We've enabled the Technicians USB stick and ISO to run the portable version of Reflect on Windows Hyper-V and Server Core OS's
Phantom partitions on GPT Disks:
- A corrupt GPT partition table on disk could cause Reflect to display 'phantom' disk partitons. This has been resolved.
Standalone Consolidation:
- Using the Standalone Consolidation tool, consolidate.exe, to consolidate Incrementals where an existing consolidated Inc is between the 'From' and 'To' Inc, could cause Reflect to erroneously try to locate a previously consolidated file when the backup set was opened. This has been resolved.
File and Folder:
- If a File and Folder backup definition included multiple root paths for the same drive but the drive letter was specified in both upper and lower case (eg, 'D:Data1' & 'd:Data2') then the backed up paths could be erroneously split at 'D:' & 'd:' when mounting the backup in Windows Explorer. This has been resoloved
Alternative locations:
- Using 'Alternative locations' for a backup could break the 'Enforce an entered image or File and Folder backup file name' option in the global defaults. This has been resoloved
Rescue Media Builder:
- When building PE 10 rescue media, RMBuilder will now correctly detect any installed PE 10 ADK of version 1803 or later
- If RMBuilder found any file system errors while scanning a folder for drivers, the rescue media builder could close unexpectedly. This has been resolved.
- When building PE 10 rescue media, RMBuilder would sometimes unnecessarily perform a full rebuild of the wim. This has been resolved.
- Under certain circumstances, RMBuilder would not be able to swap between Windows PE and Windows RE. This has been resolved.
- Checking and un-checking the Override Drivers checkbox will no longer cause drivers to change status from "Driver already present" to "Copy host drivers"
更新時間：2019-12-26
更新細節：
What's new in this version:
Fixed:
- Image Mounting: un-mounting an image failed if Windows Explorer was showing the mounted drive letter
更新時間：2019-12-24
更新細節：
What's new in this version:
Bug fixes and Improvements:
Image Mounting:
- Fixed: a small number of customers reported that they could not mount Macrium Reflect images after dismounting a previously mounted image
viBoot:
- We've improved the ability for Reflect to detect bootable image files and enable the 'Boot Image' functionality in Reflect
Bitlocker system restore:
- Fixed: automatic system restores for BitLocker encrypted system volumes could perform a 'BitLocker Removal' restore instead of the expected 'BitLocker Live' restore
VBScript & PowerShell:
- Fixed: the 'Run Once a Day' option when generating PowerShell and VBScript source files didn't behave as expected for scheduled tasks using the SYSTEM account
Verify File System:
- Fixed: the 'Verify File System' default image option was not honored if unchecked for scheduled images running using the SYSTEM account
Rescue Media Builder:
- The default location for PE files has been moved back to $PROGRAMDATA$MacriumReflect'=
- On Windows 7, when building Windows PE rescue media, RMBuilder will now use the Dism.exe corresponding to the wim, rather than the Dism.exe from the WAIK
- Fixed: on Windows XP, the radio button labels for boot menu options would sometimes be truncated
- Fixed: if the "override WinPE compatible drivers" checkbox was unchecked, custom USB drivers would sometimes not be included into the rescue media
- Fixed: If there was more than one version of the Windows ADK installed, RMBuilder would not copy required files from either installed ADK, and would instead prompt for a download
更新時間：2019-11-30
更新細節：
What's new in this version:
Macrium Image Guardian:
- While attempting to retrieve the status of a process that was closing, the MIG driver could inadvertently access an invalid address resulting in a BSoD. This has been resolved.
Rescue Media Builder:
- On Windows XP, the rescue media builder would sometimes give a "WIM file not found" pop-up when there was a valid WIM file present. This has been resolved.
- When performing an automatic restore on a system with multiple network adapters, the network adapter configuration process will be logged in more detail.
更新時間：2019-11-19
更新細節：
What's new in this version:
Server Plus Edition:
- Fixed: exchange backups could crash after completion if the log file couldn't be written to
Incorrect ReflectUI.exe Message Box:
- Fixed: on system startup an incorrect pop-up dialog box could be shown by ReflectUI.exe
viBoot:
- Fixed: images created by 'foreign' systems (not the same PC) could fail to enable the 'Boot Image' functionality in Reflect
Macrium Image Guardian:
- We've improved the security of MIG by enhancing the malicious injection of threads into running processes
Change Block Tracker:
- Minor performance and stability enhancements
Rescue Media Builder:
- On some systems with dynamic disks, it was possible for the location of the PE files to be incorrectly set, causing boot menu entries to fail. This has been resolved
- On USB-based rescue media, un-checking the "Check for devices missing drivers on boot" checkbox and rebuilding would sometimes not make the rescue media stop prompting for missing drivers. This has been resolved
- When building Technicians media, failing to create autorun.inf will no longer cause the rescue media creation to abort
- If the Windows ADK version 1607 was installed but a 64-bit PE 10 zip file was used to build rescue media, any subsequent 32-bit PE 10 builds would not prompt for an updated wim but would always use the 1607 wim from the ADK. This has been resolved
- RMBuilder could fail to detect a new version of Windows RE after a Windows update. This has been resolved