IsoBuster 歷史版本列表
更新時間：2018-06-22
更新細節：
What's new in this version:
Changes / New:
- Rewrote the options dialog to look fresh and most importantly te be decluttered and intuitive again. Added to that, selecting a language or changing a font now changes all options' text immediately, so that you can see the effect
- Added BDXL, M-Disc, UHD, Triple Layer (TL) and (Quadruple Layer) QL BD(RE) disc support
- Ability to start IsoBuster 'idle' without any drive auto-selected (not the default but can be set in Options)
- Search (now by default) searches the entire region of the selected object, and not just the most relevant File System. For instance when a Session is selected, all tracks and file systems in those tracks will be searched and not just the most relevant file system in the most relevant track. The old way can still be turned on again in options
- Work around for issue (most likely a buggy USB bridge driver) that causes less bytes to be transfered when reading raw (2352 bytes per block) on some systems
- Ability to specify where the IBQ range ends, to influence filling gaps and where finishing at the end starts [Professional license]
- Implemented more flavours of Rimage Image files (*.rmg)
- Show text portions of certain Image files via an extra option in the main menu (e.g. for: *.cue, *.rmg, *.ewf, *.ccd)
- Rewrote the file export / report functionality to make it much faster, 10 times faster or more than before
- Rewrote CUE file parsing to better deal with multi-file images and improve the overall functionality
- Support reading in the first pregap on a CD (addresses -150 to -1), for instance with Sector View
- The Edit window / Sector Viewer can be set (and will remember) its own font for both normal text and text that requires a fixed width font
Improvements:
- Make sure the correct encoding is always used for XML, RTF and TXT in the Edit Window (TXT is now the default over RTF, using UTF8)
- Allow any extension, if more appropriate, when saving a file from the edit window
- Improved search functionality engine for even faster and more accurate search results
- Improved resolving of a path copied in the breadcrumb control / edit bar, to show the proper object(s)
- Do not display "Processing File-System" when mounting an Audio CD
- Show better caption on the extraction dialog when cloning a drive or partition
- Better detection of Atari DOS discs/images
- Improve display of Mac 'Type' and 'Creator', in case of illegal (non-printable) characters
- Implemented a more generic approach to store and use the ISO9660 / Joliet 'associated file'. The associated file is used as resource fork on Mac created discs but can in theory also exist on its own, for other implementations. We now treat it as a stream and also extract it as such
- Added tags {%ASCII} and {%ANSI} to the file (encoding) export functionality
- Added tags {%SUID} and {%PSUID} as unique object identifiers to the file export functionality
- Added tags <%TSNSHT> and <%TSNSHRESET> to measure time of certain processes to the file export functionality
- Added tags {%DFXML}, {%ISO8601}, <%TIMEDATETZ> and <%SYSTIMEDATETZ> to support ISO 8601 date and time formatting (which is required in DFXML exports)
- Always escape single and double quotes in XML exports, but the caller can disable this with commands {%ASQ} and/or {%ADQ}
- Always escape '<' and '>' characters in XML exports, but the caller can disable this with commands {%A>} and/or {%A<}
- Added tag {%ONLYUNREADABLE} to only log unreadable objects in file exports
- Changed the export logic so that width is now explored first rather than the depth, but it can be changed with {%DEPTHFIRST} or {%FLAT}
- Default, folders are now also exported in File Lists / Reports
- Changed the embedded XML export list, to take advantage of new commands and tags
- Changed the embedded DFXML export list, to take advantage of new commands and tags
- Replace single quotes by double quotes in the predefined XML layout, so that files with single quotes (and apostrophe) do not cause problems parsing the XML
- Show text in combobox control when no drives are found but finding them has been disabled in options, so that you better realizes what is going on
- Improved display of the application when starting up and when certain devices are slow to respond (Show "Finding Devices" in combobox meanwhile)
- Add Catalogue and ISRC to the CUE file (if present / per track)
- Display ISRC per track and Catalogue per CD, in properties, even when no CD-Text is present
- Add (and retrieve) more CD-Text to/from CUE files
- If the ISO is smaller than what the CUE suggests, the last track will still get a minimum size (2 seconds = 150 blocks) so that the track is shown with errors
- If the ISO / BIN image file is too small for what the CUE describes we immediately update the sector bitmap so that the effect can be seen in the blocks map (for instance via properties)
- Make sure there's a red X displayed next to a session icon as well, when one of its tracks contains unreadable sectors
- Improved NTFS parsing speed and efficiency by not going deep automatically on embedded folders, by retaining the required information differently, until exploring the folder is requested (via display, extract, search or ..)
- Considerable speed improvements when opening *.ibdat and *.ibadr files, by keeping track of bad ranges
- Made IBP/IBQ image file reading in case of erroneous sectors 5 to 15 times faster
- Made searching for missing files and folders in an IBP/IBQ image with lots of errors up to 26 times faster
- Display grey blocks in the blocks map, for ranges beyond the bitmap readable range (as in when an IBP/IBQ has not yet been fully read)
- Improve blocks map hints when the address range is contiguous
- Deselect the last square in the blocks map when moving outside the squares (but still inside the control)
- Zoom-in via double click on the blocks map squares shown in properties [Professional license]
- Sector View via double click on a single-sector square in the blocks map (e.g. via object properties) [Professional license]
- Double clicking middle or right mouse buttons zooms out again
- Added commands /cfpr /fs and /el on the command line
- Speed improvement when reading audio from 2352 bytes per block image files
- Expose relevant NTFS extent properties. For instance to show extents of compressed files as compressed (blue)
- ListView icons also reflect the compressed or encrypted state of an object
- Sparse parts of a file or folder are shown in a light blue color
- Clear what we know about the destination drive's content after making a clone, since its content will have changed entirely, so a refresh is needed
- Support hex notation ..h (for instance FFFFh or aah) aside from the already supported 0x.. notation in address and length input fields
- Also show CD/DVD/BD properties on blank media
- Plenty of other improvements, changes and re-writes in the core code / engine, as this is a living project and to deal with the ever growing new functionality
- Various other GUI improvements
Fixes:
- Fixed issue causing the online help to not always show the correct page
- Fixed sorting issue that only really showed when exploring the root of ISO9660 or derivative file systems
- Properly detect audio in the first track's pregap inside an image so that reading raw in the pregap doesn't trigger completing the sync bytes, or fails entirely
- <%SYSTIMELAPSEDSEC> in File Lists / Reports was calculated wrongly (with a factor 100)
- Fixed it so that the MD5 is automatically created again after making an image file if that is how it is set in options
- Do not create an MD5 or CUE after making a clone, if that is what is set in options after making an image file
- Fixed issue introduced in IB 4.1 for NTFS files that are highly fragmented. The full file size would not be taken in account for files consisting of more than 22,799 extents. Now tests with +1,507,519 extents worked perfectly
- Fixed the edit window toolbar height changing slightly every time the window was shown again
- Fixed rare issue that truncated the size of a file (with a few bytes), when extracting (audio) blocks using From-To functionality and wrapping the data in a WAVE RIFF header
- Fixed image file generation and overal handling of audio discs when track 1 does not start on address 0
更新時間：2017-12-16
更新細節：
What's new in this version:
Changes / New:
- Added XML style export when creating lists/reports starting from a file-system or folder
- Added (Digital Forensics) DFXML style export when creating lists/reports starting from a file-system or folder
- Support for MFS (Macintosh File System) which was used prior to HFS, mainly on 400KB and 800KB floppies
- Support for DC42 image files, which are old style Mac floppy image files
- Ability to define your own style lists/reports and create/export them from the GUI
- Help (F1) now goes online and shows the online help in your browser. The help file is still installed as well and online help can be turned off in options
- GUI option to display all time stamps in GMT / UTC
Improvements:
- Catch PC going to sleep and wake-up messages and delay auto-finding and removing of drives for 10 seconds after waking up, so that external drives get the chance to be found again. Otherwise (overnight) scan results may be removed again when the PC wakes up (after having gone to sleep), because the drive was dismounted due to the sleep process
- Do not ignore slack space between partitions smaller than 2048 blocks anymore. Assign it to a new partition for easy inspecting, searching etc.
- Improved read caching mechanisms
- Make sure that Main Menu text used to display loaded image file properties is translated, when the language is changed via options
- Repaint block map in the Managed Image File Manager ([Professional] functionality) when F5 is clicked
- Ability to select multiple blocks in the block map, to see the range it spans
- Ability to select multiple blocks in the block map that is part of the Managed Image File Manager, to perform actions on that range
- Keep polling blank media, because sometimes a drive reports blank media while it is still mounting the disc
- Improvements setting the font in the Edit window and better support for different monospace fonts
- Improved sizing of the Drive Combobox on application start, so that it works properly for all fonts and shows the items fully
- Improvements dealing with inactive NTFS INDX records and test their content for duplicate files or folders
- Do not automatically go deep on (embedded) folders that are listed in inactive NTFS INDX records
- Optimized allocating memory for large NTFS folders
- Hide raw type extraction (via right-mouse-click) on media that does not support raw
- Hide the right-mouse-click extents icon when there are no multiple extents
- Remove strange long waits for the right-mouse-click-popup to appear after lots of objects (especially folders) have been found
- Shows ISRC in Track Properties (when available)
- Check if there is enough free space before extracting files etc. and put up a dialog if there is an issue (not enough free space)
- Use CD-Text (if available) for filenames when extraction audio tracks from CD
- Added a plethora of new tags and commands to the existing command line functionality to export lists
- Resource forks are now also always Streams, which is important to know when doing searches, exporting lists etc.
- Made sure the block map also properly shows bad blocks when they fall outside the range of the blocks bitmap
- Show the amount of streams and extents in the right-mouse-click popup on files and folders, if present, to easily spot the exact amount
- Lots of improvements, changes and re-writes in the core code / engine, as this is a living project and to deal with the ever growing new functionality
- Various other, not listed, GUI improvements
Fixes:
- On huge media, e.g. >= 4TB, and under certain conditions, displaying the block map would pop-up a division by zero error
- Sometimes, depending on the content, parsing NTFS would not always work correctly on 4Kn drives (drives with 4096 byte sectors)
- While searching for deleted NTFS files and folders it was possible to get stuck if a deleted folder was both a child and (great) parent, causing a never ending loop
- Under certain conditions, starting multiple extractions could cause memory issues on the stack, resulting into an exception error
- Fix for CD-i (for RTF files for instance) where sometimes the tail end of the file would be missing (if (partially) located on 2324-bytes sectors)
- Fixed it so that the block map is properly refreshed after filling gaps via the Managed Image File Manager
- Fixed Access Violation while extracting a certain illegal NTFS file (freak situation: deleted, embedded, file for which fixup was not set, and only seen one case ... ever)
更新時間：2017-06-28
更新細節：
What's new in this version:
Changes / New:
- Huge changes to the GUI to keep up with current and newer OS
- Added very powerful search functionality immediately accessible via the main window
- Added pre-defined search queries. For instance search for pictures, video etc.
- Detect whether drives are added or removed from the system and automatically update the drive selection combobox without affecting the currently selected drive or image file
- Automatic drive add or removal detection can be enabled / disabled in Options (On by default)
- Ability to show graphical represenation of good vs bad blocks on all objects, files, partitions, tracks etc via the Properties dialog
- Good vs bad blocks are also shown in the Managed Image File Manager [Professional license]. Here it is possible to select a block or zoom into the block and auto-fill the Address and Blocks' fields to easily define what blocks need to be re-read etc.
- Added easy history browsing via the breadcrumbs control
Improvements:
- Improved opening image files while another process (Refreshing) is ongoing
- Improved checking if a file is already opened, no matter what method is used to open the file
- A managed clone will detect when its target drive is connected to the system
- Avoid trying to read PathTable found ISO9660/Joliet folders without a size again and again in case of read errors
- Huge changes in the underlying GUI code/engine to be able to keep up with modern OS and prepare for the future
- Improved the search engine dramatically to be extremely powerful. Easily find fragmented files, extents, streams, etc. etc.
- Improved message boxes
- Improved breadcrumbs control so that is behaves similar than modern OS
- Improved image file (ISO, IMG, VDI, IBP/IBQ, ...) access and reading, for most type images files, so that it is a lot faster now
- Show Media in the breadcrumb bar when selecting a drive (or when starting up with a drive)
- Show NTFS File System Root properties
- Better filtering of illegal characters from devices names
- Chosing large fonts also auto-selects the use of larger icons
- Double clicking a Partition, Track or Session in ListView now also shows its children in ListView (except for Audio CDs)
- File systems are listed in ListView as well, when the track or partition in selected in the TreeView
- Easy way via ListView to start a scan for missing files and folders, when a partition without file systems is selected
- Ability to right mouse click and show a file's resource fork
- Updated file system icons
- Avoid excessive IBP updating, mainly when completing on demand
- Lots of improvements, changes and re-writes in the core code / engine, as this is a living project and to deal with the ever growing new functionality
- Various other, not listed, GUI improvements
Fixes:
- Do not allow to select a new device via the back and forward (history) buttons when critical GUI List/Tree Item processes are ongoing
- Fix it so that a check to see if a file contains video keeps returning consistent data after for instance Extract2Mpg has been chosen
- Fixed rare stack overflow when exploring NTFS, in case of many small nested folders
- Fix and return consistent data after an NTFS search for deleted files/folders when sorting is turned off entirely
更新時間：2016-12-20
更新細節：
What's new in this version:
Changes/New:
- You can now define your own rules/signatures for finding files based on their signature [Professional license]
- Added support for Windows 10 transparent system compressed NTFS files
- Added a WIM Tab to NTFS File properties, when the file is actually stored in a WIM [Professional license]
- Clone an entire drive (partitions and all) or a single partition, to another Hard Drive or partition
- Perform a so called 'Managed' Clone of a drive (partitions and all) to another Hard Drive. This is the same as making a managed IBP but the IBQ is written to a source Hard Disk instead of a file [Professional license]
- Support for the Opera 3DO file system
- Support for B6T and B6I image files
- Clicking an address in the Properties window launches Sector View, showing the content of that address
- From-To dialog (If set via Options) when doing a surface scan
- From-To dialog (If set via Options) when doing a scan for missing files and folders [Professional license]
- From-To dialog (If set via Options) when creating a list of erroneous sectors
- /eto: command line parameter that takes a value in milliseconds as time out during extraction
Improvements:
- Improved sector view and edit window's functionality to stay on top
- On a Sparse object, SectorView shows all zeroes and the text 'Sparse' but when the edit box or scroll buttons are used, the address changes and that content should be shown (which now happens)
- Show End-address when a surface scan was interrupted (if From-To dialog was used)
- Display the MFT LBA rather than the timezone, in properties, because there is no timezone field in NTFS anyway
- Display the FAT address in FAT file system Properties
- Improved the default settings wrt auto-scanning and exploring a file system completely
- Improved the dialog after an interrupted file-system expansion, to take in account folder-per-folder browsing
- Extended /ei: command line parameter to also make a (managed) clone
- Extended /t: command line parameter to support /t:audio and /t:data to extract all audio or all data tracks
- Extended /range: command line parameter to also work during extraction of image files, scan for missing files and folders, ...
- Extended /fromto: command line parameter to also work during extraction of image files, scan for missing files and folders, ...
- Improved command line parameter /d:: to also fully support Physical Drive ID's higher than 9
- Make sure certain @... commands via the GUI command line can still be executed when no drives are found
- Added PIONEER as DVD Video recorder application - to automatically look for DVD Video
- Small cosmetic change (not perfect) to avoid previous small file's name to be displayed during huge file extraction
- A few improvements, changes and re-writes in the core code / engine, as this is a living project and to deal with the ever growing new functionality
- Various other, not listed, GUI improvements
Fixes:
- If the IBP/IBQ Complete OnDemand Mode was turned on and next turned off again before closing the file (Via the IBP/IBQ Manager), changes would be lost
- Fixed command line parameter /p: to always work on the correctly selected Partition
- Turned off overlay icons display by default, because it can cause weird visual effects on some Windows 10 systems
- ISO9660 with more folders in the pathtable than than the root folder (illegal situation), could be expanded two ways, depending on what path was followed. This has been fixed and everything is now shown always
- Aborting creation of an IBP/IBQ file could cause IsoBuster to think all sectors above that point in the source were unreadable. Cosmetic only, extraction would still simply work
更新時間：2016-06-24
更新細節：
更新時間：2015-12-18
更新細節：
What's new in this version:
Changes / New:
- Implemented a Breadcrumbs control for easy navigation, with right mouse click Pop-up for easy task selection
- The Breadcrumbs' edit control also interprets paths you copy in it (with limitations), or can show the current path, for easy copying to the clipboard
- Support for typing in a limited list of commands in the Breadcrumbs' edit control (@close, @refresh:drives, @stop, @restart, @new, @find:)
- Ability to turn off TreeView trying to follow selections made in ListView and Breadcrumbs (faster and less memory use due to virtual implementation)
- Elaborate Search functionality (Ctrl+F), to try and find file(s) and/or folder(s) with certain properties in existing file-systems or file lists. Not to be confused with data/file carving functionality to try and find missing files and folders (Ctrl+F3)
Improvements:
- Improved use of, and added a lot more ShortCuts throughout the software
- Different ListView columns layout for search results and ability to show the full path
- Improved display of files and folders in the status bar, during exploration of folders etc.
- Improvement in time stamp display and during file extraction, for files created in a different daylight saving time period
- Ability to reload the drives' list (Shift+Ctrl+R) and all associated objects (files folders etc.)(To check if USB drives have been inserted or removed)
- Improved the speed of finding a TreeView item exponentially
- Make sure the size of an initial install is not bigger than the screen resolution (on systems with low resolution)
- Workaround for Oracle VM VirtualBox 'VBOX CD-ROM' virtual drive that doesn't return correct information in case the ISO file is big (e.g. of a DVD)
- Added Main menu item to allow you to Upgrade from a [Personal] license to a [Professional] license
- Allow to properly resize the Properties (Ctrl+I) Window
- Show blocks being read in status bar while doing a scan for missing files and folders
- Added 'Copy path as text to clipboard' function (Ctrl+C)
- Quite a few improvements, changes and re-writes in the core code / engine, as this is a living project and to deal with the ever growing new functionality
- Various GUI improvements
Fixes:
- Bugfix for HFS - Not all folder content was shown all the time
- Bugfix for FAT - Big folders covering multiple clusters would sometimes not be explored fully
- Fixed it so that the Save Dialog, Print Dialog and Font Dialog won't be displayed behind the SectorView window
更新時間：2015-06-20
更新細節：
更新時間：2014-06-19
更新細節：
What's new in this version:
- Don't drop the settings at unistall, improvement for update, fix the free space bug, fix crash at startup into the static version, performance improvement, inode thread -> 1