GOM Media Player 歷史版本列表
更新時間：2022-07-26
更新細節：
更新時間：2022-07-20
更新細節：
What's new in this version:
- api - fixed comma encoding within URL when using the ".proplist" argument
- bridge - properly process IPsec decapsulated packets through the firewall when the "use-ip-firewall" option is enabled
- capsman - require a unique name for configuration and configuration pre-sets
- certificate - fixed new CRL updating
- chr - fixed booting with added additional SCSI disk
- cloud - print critical log message when system clock gets synchronized
- console - added ":retry" command
- console - fixed situation when print output was not consistent
- defconf - fixed default configuration loading on devices with WifiWave2 package
- dhcp-relay - fixed DHCPv6 relay forward and reply creation (introduced in v7.1.3)
- dhcp-server - change "vendor-class-id" matcher to generic option matcher
- dhcpv4-server - disallowed overriding message type option
- dhcpv4-server - log message when user option updates existing option
- dhcpv4-server - placed option 53 as the first one in the packet
- dns - convert the domain name to lowercase before matching regex
- dot1x - fixed "undo" command for server instances
- e-mail - added VRF support
- filesystem - fixed repartition on RB5009 series devices
- firewall - added "srcnat" and "dstnat" flags to IPv6/Firewall/Connection table
- firewall - added support for IPv6/Firewall/NAT action=src-nat rules
- firewall - fixed IPv6 NAT functionality when processing GRE traffic on TILE devices
- firewall - fixed IPv6/Firewall/RAW functionality
- firewall - include "connection-mark", "connection-state", and "packet-mark" when packet logging is enabled
- firewall - properly handle interface matcher when VRF interface is specified
- health - fixed requesting data from sensor when issuing "get" command
- health - fixed voltage reporting on some RBmAP-2nD devices
- hotspot - fixed ARP resolution for clients when address pool is specified on the server
- hotspot - fixed Walled Garden entries with action=deny
- ipv6 - fixed system stability when adding/removing IPv6 address
- l2tp - improved stability when establishing l2tp-ether connection (introduced in v7.3)
- ldp - correctly handle AFI selection for usage on dual-stack peers
- leds - fixed GPS LED configuration on LtAP LTE kit
- leds - fixed LTE signal strength LED configuration on LHGG LTE kit
- leds - fixed LTE signal strength LED configuration on LtAP LTE kit
- lte - added AT chat support for Dell dw5821e modem
- lte - fixed LTE interface running state after modem reconnection
- lte - fixed Telit AT interface numbering
- lte - improved LTE interface detection for LtAP-2HnD devices
- lte - keep MBIM working even if AT channel fails to respond in the initialization stage
- lte - request connect with the same IP type as in LTE attach status for MBIM
- lte - show current value for "antenna" parameter when auto antenna selection fails
- lte - validate LTE attached IP type in MBIM mode
- mmips - improved USB device detection after system bootup
- mpls - fixed VPLS functionality when PW peer is an immediate neighbor
- mpls - improved stability with enabled loop-detect
- mqtt - fixed log flooding with disconnect messages
- mqtt - fixed socket error handling
- netwatch - added support for more advanced probing
- ntp - added VRF support for client and server
- ntp - fixed manycast server support
- ntp - improved "debug" log level logging
- ovpn - added "AUTH_FAILED" control message sending
- ovpn - fixed "called-station-id" RADIUS attribute value for OVPN server
- ovpn - use selected cipher by default when the server does not provide "cipher" option
- pimsm - improved system stability when changing configuration
- poe - hide "poe-voltage" parameter on devices that do not support it
- ppp - do not fail connection when trying to add existing IP address to address list
- ppp - log warning message when remote IP address can not be added
- ppp - properly try to use different authentication algorithms when Conf-Rej is received during the LCP phase
- quickset - specify the "in-interface-list=WAN" attribute on firewall rules created through "Port Mapping"
- radius - added VRF support for RADIUS client
- route - added option to join static IGMP and MLD groups (available in "/routing/gmp" menu)
- route - expose all valid routes to route select filter from BGP
- route - expose all valid routes to route select filter from OSPF and RIP
- route - fixed false route type detection as blackhole
- route - fixed log messages when changing routing configuration
- route - made export run faster on tables with a large number of dynamic routes
- route - provide more detailed information about prefixes when using "discourse" tool
- route-filter - fixed route select filter rules
- routing - moved "/interface bgp vpls" to "/routing bgp vpls" menu
- routing-filter - added origin matcher to match for example routes of a specific OSPF instance
- routing-filter - fixed regexp community matcher
- routing-filter - made "do-jump" work in select rules
- rpki - fix potential memory leak
- ssh - disable ssh-rsa when strong-crypto=yes and use rsa-sha2-sha256
- ssh - fixed host key generation (introduced in v7.3)
- ssh - implemented "server-sig-algs" extension in order to improve rsa-sha2-sha256 support
- switch - disabled second CPU core for CRS328-24P-4S+ device in order to improve SFP+ link stability
- switch - fixed multicast flooding when HW offloaded bridge port gets disabled
- system - added "shutdown" parameter for reset-configuration (CLI only)
- system - fixed configuration reset with "run-after-reset" with file stored on ramdisk
- upgrade - ignore same version packages during upgrade procedure
- upgrade - improved RouterOS upgrade stability with attached USB modem on MIPSBE, SMIPS and MMIPS devices
- vpls - improved system stability with enabled connection tracking
- vxlan - allow to specify MAC address manually
- w60g - fixed interface "reset-configuration" on Cube 60 devices
- w60g - improved interface initialization after being inactive for a while
- w60g - improved system stability when using mismatched L2MTU between station and AP
- webfig - updated WebFig HTML files with the new MikroTik logo and removed Telnet option from index page
- webfig - updated link to the WinBox executable
- webfig - updated link to the documentation
- wifiwave2 - added initial support for roaming (802.11r) between local AP interfaces
- wifiwave2 - fixed "frequency-scan" functionality (introduced in v7.3)
- wifiwave2 - improved WPA3 support stability
- winbox - add a log and log-prefix options to IPv6 firewall NAT and mangle rules
- winbox - added "name" parameter under "Routing/BGP/Session" menu
- winbox - added "to-address" and "to-ports" parameters under "IPv6/Firewall/NAT" menu
- winbox - added support for "veth" interface types
- winbox - fixed "inactive" flag naming under "MPLS/Local Mapping" menu
- winbox - fixed IP/Route and IPv6/Route OSPF type value
- winbox - fixed filename dropdown value filtering
- winbox - fixed minor typo under "Interface" stats
- winbox - fixed units for "reachable-time" parameter under "IPv6/ND" menu
- winbox - removed "TLS Host" parameter from "IP/Firewall/NAT" menu
- winbox - removed duplicate signal strength column under "Wireless/Registration Table" menu
- winbox - removed unused "Apply Changes" button from BGP sessions menu
- wireguard - fixed system stability when adding/removing WireGuard interface
- wireless - fixed possible traffic flooding to WDS clients when using Nv2 and multicast helper
- x86 - fixed Broadcom NIC support
- x86 - fixed keep old configuration functionality during x86 setup installation
- x86 - improved log warning message on failed downgrade attempt
- x86 - removed "hdd-model" information from installation screen
更新時間：2022-07-20
更新細節：
更新時間：2022-07-20
更新細節：
更新時間：2022-07-14
更新細節：
更新時間：2022-07-14
更新細節：
What's new in this version:
New Features and Improvements:
- The German localization has been improved
- Updated the version of Electron used for app Twine to the latest v17 release
Fixed:
- Fixed a bug related to updating stories' story formats. This showed up in 2.4.0 as a crash message the first time a story was edited.
- Browser Twine now uses the Storage Manager API to determine how much space is left for Twine to use. You may see a change in the value reported from previous versions, which estimated it by trying to save increasingly large amounts of data until it failed. This should fix error messages seen in 2.4.0 like Failed to execute 'setItem' on 'Storage': Setting the value of 'twine-passages-abcdef-ghijklmn' exceeded the quota.)
- Backups work properly in app Twine
更新時間：2022-07-13
更新細節：
What's new in this version:
Enhancements:
- Command Line Call Generator: Windows: Give the ability to generate a .bat file with the command embedded in it Mac / Linux: Give the ability to generate a .sh file with the command embedded in it
- Command Line Call Generator: On Windows systems added a Schedule Command button that has options for creating a task in the Windows Task Scheduler
Fixed:
- Command Line Call Generator: Multi-line syntax section not appearing in certain situations
- Windows: When scaling above 100%, clicking the mouse may put the cursor position left or right of the mouse pointer location on the screen when using certain font sizes
更新時間：2022-07-06
更新細節：
What's new in this version:
- A lot has changed between the 2.3 series and 2.4.0 and I'd recommend reading the Reference for a thorough description of how it all works. I'll summarize here, though.
- Even with these changes, 2.4.0 should work fine with stories created with 2.3 without any problems. If you decide you don't like 2.4.0 and want to continue using 2.3, you may run into some weirdness, as this hasn't been tested. If you use the online version, you can go back to the previous version at https://twinery.org/2.3.16.
Even though 2.4.0 has been a long time in the making, it's still a .0 release. I wouldn't recommend updating yet if:
- You are in the middle of a large project. Or at the very least, please make backup copies of your work before upgrading!
- You are using a non-English localization. Many UI changes have occurred and unfortunately, it has been hard to get help translating new text. (If you can help out, please see these directions!) So using Twine with a non-English locale setting will show a mishmash of translated and untranslated text.
General UI Updates:
- There's now a toolbar that appears at the top of the screen for all actions. The toolbar's separated into tabs, similar to a menu bar, and has a back button allowing navigation between screens.
- The system font is used instead of a custom one. This is mostly an aesthetic change, but it also helps with non-Latin text.
- Some actions, like changing preferences or editing story formats, are available regardless of where you are in the app.
- The desktop app now has an ARM Linux build, and the macOS app is universal, running on both Intel and Apple Silicon processors natively.
- The desktop app has a new icon.
The Story List:
- You now select a story from the list and then take an action on it using the toolbar instead of using a gear menu. Double-clicking a story will edit it.
- Stories can now be tagged, and the story list can be filtered to show only certain tags. Just like passage tags, story tags can have colors associated with them.
- Story previews have been updated to look hopefully nicer
The Story Format List:
- By default, only the most up-to-date version of a story format is shown in the list. You can see all installed formats using the View top toolbar tab.
The Story Map:
- You can now undo and redo changes
- You can now edit multiple passages at one time
- You can rename a passage without editing it
- You can now delete more than one passage at a time
- All detail dialogs, like the find & replace text dialog, are now modeless, meaning that you can do other work in your story while they're open
- You can customize the font used in passage editors and disable cursor blinking
- Story formats now have an official way to extend the editor. (The Harlowe story format used undocumented methods to do this in the past.) Story formats can add syntax highlighting to passage editors, a toolbar of actions to passage editors, and add additional connections between passages in the map.
- Right now, Harlowe and Chapbook have extensions but other story formats may add them in the future
- You can disable story format extensions if they are causing trouble or you prefer not to use them
- If you're a story format developer, learn how extensions work here
- Editing larger stories is faster
Story Formats:
- Harlowe 3.3.0 is included, and release notes are here
- Chapbook 1.2.2 is also included. It's the same as the last version, 1.2.1, except for the addition of editor extensions.
Reliability:
- Twine has been migrated to TypeScript, a JavaScript dialect which automatically checks for certain kinds of coding errors
- Test coverage of Twine has improved significantly and changes now require code linting and tests to pass before being merged
更新時間：2022-07-05
更新細節：
更新時間：2022-07-05
更新細節：
What's new in this version:
Changed:
- The Registration Mark square is now affected by the Thickness slider
Fixed an issue where Library thumbnails are partially downloading, displaying only half the thumbnail icon. To fix thumbnails that have already been affected, users will need to do the following:
- Open Silhouette Studio
- Go to the Library
- Right click the affected design
- Click "Retry Download"
- Wait for the library to sync
- Restart Silhouette Studio
Added Cameo 4 Firmware 1.18 and 5.03:
- Improved the Cameo 4's ability to detect the Deep Cut Blade
Added Portrait 3 Firmware 5.01:
- Fixed a bug where the carriage would move unintentionally if the Portrait 3 was turned off during cutting then turned back on
Activation:
- Silhouette Studio now checks if a license key has been applied to your account before showing the "Activate Code" section
- Fixed an issue in the "Apply License" window where the "Apply" button could remain greyed out after clicking "Back"
- Fixed an issue where the "Apply Upgrade" window could appear behind the "Activation" window