Bitdefender Total Security (64-bit) 歷史版本列表 Page1

更新時間：2022-11-12
更新細節：

What's new in this version:

Bitdefender Total Security 2021 Build 26.0.30.102 (64-bit)
Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.28.94 (64-bit)
Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.23.80 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.21.78 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.18.75 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.16.69 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.14.65 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.14.62 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.12.59 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.12.56 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.10.45 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.7.41 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.7.34 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.1.21 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.1.15 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 25.0.26.89 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 25.0.23.81 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 25.0.21.78 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 25.0.19.75 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 25.0.10.52 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 25.0.7.34 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 25.0.3.24 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 25.0.2.14 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.26.138 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.24.131 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.24.121 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.20.116 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.16.91 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.12.72 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.9.52 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.3.15 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2019 Build 23.0.24.120 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2019 Build 23.0.22.97 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2019 Build 23.0.16.72 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2019 Build 23.0.8.17 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.21.297 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.19.242 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.18.224 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.18.222 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.17.205 (64-bit)

This version fixes the following issues:
- An issue where the contextual menu would be missing
- An issue where the SafePay virtual keyboard could be moved outside of reach
- An issue where the Wallet would show as enabled in Firefox but disabled in the product
- An issue where the Bitdefender Agent would report that the services are not responding
- An issue where the user was unable to delete/mark as read notifications
- An issue where the Webcam Protection module would crash the Windows Camera and Camera 365 from Toshiba
- An issue where the Autopilot would re-enable itself after coming out of Sleep or after a reboot
- An issue where the product would disconnect PIA VPN

The following improvements were included:
- Several interface improvements
- Augmented the Support Tool's ability to gather Bitdefender relevant data
- Better WSC integration on Windows 10
- Implemented multiple .exe selection in ATD Whitelist
- Product performance and stability tweaks
- Product password now protects the Account tab
- Several improvements to the DiskCleanup module
- Several improvements to the Safe Files module


Bitdefender Total Security 2018 Build 22.0.15.189 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.12.161 (64-bit)

This version fixes the following issues:
- Fixed an issue with Active Threat Defense not activating
- Fixed an issue where the product would show "Last Update Never"
- Fixed an issue where the offline weekly updates would not detect Bitdefender 2018
- Fixed an issue where Google would report SafePay is an outdated browser
- Fixed an issue where Custom Scans would not be saved after switching to Aggressive
- Fixed an issue where SafePay couldn't save bank statements(PDF) on hsbc.co.uk

The following improvements were included:
- Wallet's compatibility with several websites
- Several Improvements to the in-product Support Tool
- Several interface improvements
- Various Install Engine optimizations
- Various SafePay optimizations and security improvements
- Several Firewall improvements
- Several Advanced Threat Defense improvements
- Improved compatibility with upcoming Windows release
- Several OneClick Optimizer improvements


Bitdefender Total Security 2018 Build 22.0.10.141 (64-bit)

This version fixes the following issues:
- Fixed an issue where the Ransomware Protection(Safe Files) causes the TaskBar icons to hide
- Fixed an issue causing the Agent to initialize improperly causing the product to stay into a inactive state
- Fixed an issue causing the product to block internet access after a period of time
- Fixed an issue where the SafePay notification would appear several times for some banks
- Fixed an issue where the Vulnerability Scan would show a blank window for Critical Windows Updates.
- Fixed an issue where the Reset Settings for Bitdefender Shield would not prompt for confirmation
- Fixed an issue where as the Security Report would display extra days in a month
- Fixed an issue where as the text in the GUI would be displayed with a slight delay
- Fixed an issue where the SafePay Virtual Keyboard would enter the text into the address bar by default
- Fixed an issue where the Open With contextual menu would be disabled once the subscription expires
- Fixed an issue where the Widget would reset its position after a reboot
- Fixed a rare issue where the Name/eMail/Device would not be displayed in the Account Info page
- Fixed a rare issue where as SafePay could not perform a login into certain banking websites
- This version fixes the vulnerability FG-VD-17-019 reported by Fortinet’s FortiGuard Labs through responsible disclosure

The following improvements were included:
- Several interface improvements
- USB Immunizer functionality was augmented
- Improved the security of the Install Engine
- Various optimizations to the Install Engine
- Added link to the Bitdefender Uninstall Tool should the Install Engine fail to deploy drivers
- Various optimizations to the Scan Engine
- Various optimizations to the Update Engine
- Various optimizations to the SafePay browser
- Various optimizations to the Firewall - Adapter Engine
- Various optimizations to the Webcam Protection module
- Added Dynamic Adapter type (It will setup itself depending on your Windows Adapter setting : Home/Office type settings for the Private Network and Public for the Public Network)
- Added the ability to copy/paste information from Notifications
- Improvements leading to better compatibility with the next Windows Security Center update


Bitdefender Total Security 2018 Build 22.0.8.114 (64-bit)
- The new generation of the award-winning line introduces a multi-layer defense against ransomware, the malware outbreak that’s evading many detection filters and encrypting users' documents then demanding ransom to decrypt them. Advanced Threat Defense finds patterns of behavior to detect and block even the newest threats while Real Time Protection instantly stops all known threats. As an additional protection, the new Safe Files feature prevents unauthorized alterations to sensitive files.
- User privacy, a growing concern among users in an era of state-sponsored espionage, mass data theft and the proliferation of hackers, is enhanced in the latest Bitdefender product line, with innovations such as Webcam Protection that prevents webcam spying, fending off snoops, blackmailers and others.
- The new Firewall makes it easy for non tech savvy users to take full advantage of this essential safety feature. Account Privacy for iOS and Android checks if any of your e-mails have been leaked, and may be used in subsequent targeted attacks or for extortion.


Bitdefender Total Security 2017 Build 21.0.25.92 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2017 Build 21.0.23.1101 (64-bit)

This version fixes the following issues:
- Fixed a crash caused by the Update module
- Fixed a rare crash caused by SafePay
- Fixed a issue with the Firefox extension signatures
- Fixed a issue causing the Bitdefender window to shift to the right
- Fixed a issue causing the Wallet to prompt for the account on the same browser session
- Fixed a issue where the Agent failed to stop
- Fixed a issue where the Wallet would display empty lists when scrolling down the menu
- Fixed a rare crash causing vsserv to crash
- Fixed a crash caused by SafePay
- Fixed a crash caused by the Agent
- Fixed a issue causing the Agent not to deploy properly
- Fixed a issue where the Custom Scan would not start at the proper time
- Fixed a issue where the email archives would be purged from the Quarantine
- Fixed a rare issue causing the Uninstaller to crash
- Fixed a issue where the Security Report would show the improper period
- Fixed a issue where the product would revert the default language to English after a repair
- Fixed a issue where SafePay would not keep the zoom settings from the previous session
- Fixed a issue causing SafePay to be unable to open PDF files

The following improvements were included:
- The product now complies with the Microsoft DSA requirements
- Several improvements to the install engine
- Improved repair process
- Several improvements to the On-Access engine
- Product interface fixes and improvements
- Improved SafePay's functionality
- Several improvements to the product's self-defense mechanism
- Improved the way the Support Tool gathers Bitdefender related information
- Improvements to the Firewall engine
- Improved Wallet's compatibility with several websites
- Added support for the polish language
- Some improvements to the event engine
- Improved the way the product handles remote tasks (example : system scan from Central)
- Improved the way the product integrates with the Windows start-up process
- Some improvements to the Update engine


Bitdefender Total Security 2017 Build 21.0.22.1050 (64-bit)

This version fixes the following issues:
- Fixed a issue where the setup window would not show-up properly on high DPI machines
- Fixed a issue where the Trial would not start on a new account
- Fixed a issue where two Uninstall Surveys would open upon removing the product
- Fixed a rare issue where the Switch Account button would not activate on a expired account
- Fixed a rare crash caused by the Widget
- Fixed a rare crash caused by the Agent
- Fixed a issue where Wallet would not function under SafePay
- Fixed a issue where Paranoid Mode would block a connection without notification
- Fixed a issue where events would not be generated under Home/Office
- Fixed a issue where Aero was causing buttons to disappear from the UI
- Fixed a crash caused by the Subscription engine
- Fixed a issue where the OneClick Optimizer would places.sqlite in Firefox
- Fixed a rare issue where the Setup window would relocate randomly
- Fixed a issue where kabelmail.de users would not receive emails with the Anti-Spam enabled
- Fixed a issue where the Paranoid option would be available after disabling AVC
- Fixed a issue where the Setup engine could not create install folders
- Fixed a rare crash caused by the Notification Engine
- Fixed a issue where the Update frequency slider would revert to the default setting
- Fixed a rare crash caused by the Proxy handler
- Fixed a rare issue where the task for the Agent couldn't be created
- Fixed a issue where Wallet wouldn't autofill on Amazon and eBay
- Fixed a rare crash caused by the Settings handler
- Fixed a issue where the Security Report would show 0 files in the Vault
- Fixed a issue where the Vulnerability Scan would show the incorrect size of Windows Updates
- Fixed a rare crash caused by Bitdefender's Photon
- Fixed a issue where SafePay would randomly freeze on Surface Pro 3 devices
- Fixed a rare issue where the Widget would still show the animation for the Vulnerability Scan even after it has been completed
- Fixed a issue where the main interface would open after a delay when accessed from the system tray icon
- Fixed a issue where you the option to shutdown the machine after the scan would not be available

The following improvements were included:
- Product interface fixes and improvements
- Several improvements to the Install Engine
- Various improvements to the registration logic
- Various improvements to the way the product reports errors
- Various improvements to the Firewall Module
- SafePay performance improvements
- Enhanced the way the product uninstalls itself from the system
- Improvements to the product's self-protect function
- Moved the Delete button from Wallet edit mode in view mode
- Wallet now displays the name of the wallet when asking for the password
- Improved Wallet's compatibility with several websites
- Added the option to enable Domain discovery (printer and shares) when the Adapter is set as Home/Office
- Improved the way Bitdefender scans emails through SSL/TLS/STARTTLS


Bitdefender Total Security 2017 Build 21.0.22.1011 (64-bit)

This version fixes the following issues:
- Fixed a issue where the "Prompt before download" window would not show
- Fixed a crash caused by Traffic Light
- Fixed a crash caused by the On-Access engine
- Fixed a error where Disk Cleanup would just stop
- Fixed a issue where the Optimizer would not start
- Fixed a rare crash caused by the Wallet
- Fixed a rare crash caused by some wireless adapters
- Fixed a rare crash caused by some Nvidia drivers
- Fixed a rare crash caused by Windows Crypto API
- Fixed a crash caused by Wi-Fi advisor when system locale is set to any Asian language
- Fixed a issue where the Home Wi-Fi would show as untrusted
- Fixed a display issue where the pie chart for the Startup Optimizer would be completely grey
- Fixed a issue where all blocked applications would gain internet access after a Agent crash
- Fixed a memory leak in Snap Photo
- Fixed a issue where a scheduled scan would not run at the proper time
- Fixed a issue where the Events(Notifications) would not ask for the Settings password and allow access
- Fixed a issue where the number of days to delete content in the Quarantine woudl revert to the default number
- Fixed a issue where the Eicar test files were not counted in the Live Stats
- Fixed a issue where the title of the product is Total Security instead of the current installed product (AntiVirus / Internet Security)
- Fixed a issue where the Ransomware Protection Event is deleted under certain situations
- Fixed a issue where the "Remind me later" notification would pop-up continuously

The following improvements were included:
- Product interface fixes and improvements
- Various improvements for the install engine
- Improved the way competitive products are being removed
- Various security and functionality improvements for SafePay
- Various improvements and compatibility fixes for the Wallet
- Desktop/Music/Videos are now added as default protected zones under the Ransomware Protection
- Improved the way notifications are handled
- Improved the way trial subscriptions are being handled
- Added the possibility to remove Wi-Fi profiles
- Improved the functionality of the Wi-fi Advisor


Bitdefender Total Security 2017 Build 21.0.21.967 (64-bit)
- Change log not available for this version

更新時間：2022-08-31
更新細節：

What's new in this version:

R-Studio 9.1 build 191039
- Change log not available for this version


R-Studio 9.1 build 191029
Improved:
- Info about multi-pass imaging phases has been added to the log

Changed:
- The default system info file names have been changed to R-Studio-SystemInfo-yyyy-MM-dd

Fixed:
- It was impossible to disable all additional phases for multi-pass imaging in order to enable only the main one
- R-Studio performed Slow areas and Retrying phases of multi-pass imaging even when when they were disabled
- The Map of file command was active in the left pane of the Content panel
- R-Studio threw a Corrupt data error message for ddrescue map files larger than 64kB
- It was impossible to perform sector map operations for incomplete images
- Not all info was copied from the Get Info window
- Missing disks added to Virtual Volume Set or Virtual Mirror couldn't be edit correctly
- Some partition and drive actions could be performed during disk operations like disk scan, RAID consistency check, and so on
- No progress bar was shown during manual update
- Some cosmetic bugfixes


R-Studio 9.1 build 191026
New features:
- Support for 4k sector size for USB Stabilizer has been added
- A new command Close All Images has been added to close all opened images

Improvements:
- The update process of USB Stabilizer drivers has been improved

Fixed:
- R-Studio may have frozen while executing the Recover All Files command
- File sorting may have changed to default (Real file system) when the Show Files command was executed for an already opened tab, or the tab was moved, etc
- Child objects of a wiped drive/partition were not automatically deleted from the Device view pane
- Not all information from the Get Info window was copied
- Sometimes, R-Studio may have crashed on close


R-Studio 9.1 build 191020
New features:
The following items have been added:
- Support for the XFS file system
- Support for Intel Software RAIDs
- Data wiping for drives

Additionally for the Technician versions:
- Runtime imaging for individual folders/files
- Imaging of drive's file system (FS map) only
- Drive and file maps for all supported devices
- Drive imaging to a physical drive rather than to an image file
- New file hash functions sha1 and sha256 to forensic logs
- New extended options to control DeepSpar Stabilizer

Improvements:
- A new option Check sectors status has been added to the Recheck Recovery Chances dialog box

The Technician version
- File enumeration has been accelerated for DDI drives
- Post Actions (Shut down the computer on task completion & E-mail options) have been added to the Options window

Changes:
- The I/O Options button has been renamed to the Options button
- The Forensic Log Settings dialog box has been moved to the Forensic Log Settings tab on the Recover dialog box

Fixed:
- The Close All command appeared in the Partition tab shortcut menu even only one tab was opened
- Questionable folders may have disappeared in the panels after Rescan Folder
- Not all information could be copied from the Get Info window
- Existing zero-sized files had the green mark for recovery chances
- The Preview command was active in the Find Results panel for zero-sized files
- A negative offset may have been entered into the I/O Monitor field
- An image of a password-protected APFS container could not be opened even with the correct password
- File marking results may have been different for different time format
- The information in the Disk Properties tab was updated incorrectly
- Data on virtual block RAIDs with disks with bad sectors may have read too slowly
- R-Studio may have crashed if USB Stabilizer wasn't off during the program closure
- R-Studio crashed when the byte-to-byte imaging was selected in a system with only one disk
- Many cosmetic bugfixes

Test/hexadecimal editor:
- The Find previous command and reverse search may have executed incorrectly
- The Select From/To procedure didn't work correctly with the Search command
- The search command may have been executed incorrectly when the Not equal option was enabled
- The Append command may have been executed incorrectly


R-Studio 9.0 build 190312
Improvements:
- Two new options have been added for RapidSpar: Create Image and Complete Runtime Image
- Estimation of recovery chances has been improved
- The ISO image file type has been added to the File Types list
- During execution of the Complete runtime image, I/O Monitor now shows the read speed of the disk rather than read/write speed
- File System error message codes are expanded for deletion/move errors

Fixed:
- R-Studio Technician for Mac/Linux couldn't be re-registered into the T80+ version. Fixed
- Multi-pass images with several takes were created incorrectly if the Perform reading in reverse order if possible option was selected
- I/O Monitor showed read speed incorrectly
- A sector map file was being written not as often as necessary while completing runtime imaging
- Masked marked files were incorrectly counted
- Tabs may have closed without a due warning
- Deleted files were not marked with the red cross in the Find Results pane
- The Recover Marked button may have been inactive after marking files using the Find/Mark dialog box and when the Skip files with bad sectors option is selected on the Recover dialog box
- The Recover Marked shortcut menu item and button remained inactive when a file was marked for recovery in the Find Results pane
- When there was not enough room for a large file and a new destination was assigned, the leftover of the file left in the first place
- Recovery froze and could not be resumed if a file name and path appeared too long
- Recovery froze from the Extensions tab when the Restore folder structure and Restore from root options were selected on the Recovery dialog box
- It was possible to perform many Drag&Drop operations while performing various drive tasks
- The OK button was active when the Password field was empty on the Enter the password dialog box
- An RDR-type image could not be correctly removed from a virtual RAID
- RAID-connected tabs didn't close when the RAID parameters were altered
- A Virtual Block RAID object may have frozen when another RAID parent was added
- Many cosmetic, wrong messages, and localization bugs have been fixed.

Text/hexadecimal editor:
- The content of the UNICODE and UNICODE+ columns may have merged. These columns could not be resized
- An unnecessary inquiry about overwriting a file after executing the Tools - Save to Binary File... or Save to Hexadecimal file command may have appeared

Third-party hardware:
- R-Studio may have crashed while working with DeepSpar DDI hardware


R-Studio 9.0 build 190296
Improved:
- When a user opens an already opened partition it brings the user to the corresponding tab
- Option processing for the Find/Mark dialog box has been improved

Fixed:
- When the recover options Restore folder structure and Restore from root were selected, the original Modified and Accessed timestamps were changed to the time of file recovery
- The program may have crashed when it tried to restore interrupted runtime imaging saved as a vmdk file
- The program may have crashed when connecting to a remote computer
- Some cosmetic fixes


R-Studio 9.0 build 190295
Improved:
- R-Studio shows now S.M.A.R.T. attributes for NVME SSD devices
- Detection of S.M.A.R.T. attributes have been improved for new hard drive modes
- Processing of the .Trash folder has been improved for macOS file systems
- Processing of encrypted APFS partitions has been improved
- Detection of Disk identity parameters (Vendor name, Product name, Firmware version, Serial number) has been improved
- Additional checks have been made for runtime imaging destinations and sector map files

Fixed:
- Symlinked folders remained marked when their target were unmarked
- Files from symlinked folders may have recovered to incorrect places
- The Advanced Scan dialog box may have shown the Scan area parameter incorrectly after second clicks on the Advanced button
- Strings on Properties panel were selected incorrectly
- The Find/Mark dialog box could not show all opened partitions correctly when they were many
- R-Studio showed files in renamed folders as deleted, although they were not
- Mask presets with time periods 7, 14 days or 1, 3, 6 months, etc. created in version 9 were unnecessary converted to Customs
- R-Studio ver.9 may have crashed when opening older rdi images

Technician version:
- Objects could not be opened in the Hexadecimal editor from DDI drive map files. Fixed.
- R-Studio didn't always show S.M.A.R.T. attributes from USB Stabilizer. Fixed.
- Incorrect objects could be selected for a Destination drive for runtime imaging as Sector by sector clone on a physical drive


R-Studio 9.0 build 190275
New features:
- Several disk objects can be opened in one tab. All these objects can be simultaneously searched for files, their files can be marked and recovered
- Drive imaging can be interrupted and then resumed. When the user stops an imaging process, they have two options: to discard an already created partial image file or to save it to resume drive imaging later. Created partial images can be loaded, too.
- Some extended options have been added to the drive operation progress windows. They can be altered on-the-fly
- File types can be searched for on the Known File Types dialog box

R-Studio Technician:
- A new license type T80+. R-Studio T80+ is equal in its features to full-fledged R-Studio Technician, runs for a certain period of time, and during its validity period can be upgraded to R-Studio Technician for the initial price difference. The license price of 1 USD per day is very affordable for small businesses, computer repair shops, and individual data recovery contractors.
- R-Studio Technician is now available on our public web pages and can be tested in the Demo mode.
- Native support for data recovery hardware from DeepSpar: USB Stabilizer and RapidSpar. Such support allows the user of R-Studio to control hardware parameters directly from the R-Studio interface and create drive's sector maps to improve multiple data recovery operations.
- Runtime imaging. R-Studio creates drive images in parallel with other drive reading operations. Next time when R-Studio accesses data from imaged drive areas it gets the data from the runtime image.
- Multi-pass imaging. Images from problematic drives can be created through several phases reading data from good areas first and from bad and slow areas later. Such approach allows for extracting maximum possible amount of data even from quite faulty drives
- Support for sector maps, both in the R-Studio's format and in the third-party software ddrescue and HDDSuperClone formats
- I/O Monitor allows the user to inspect read/write operations in real time

Improved:
- Support for macOS file vault has been improved
- Symlink processing has been improved, including the Mark all and Unmark all commands
- Execution of the Save All File Names / Load File Names commands has been accelerated
- File type icons have been added to the Find Results (Find All Files) panel
- Message display in the Log View panels has been improved
- Recheck Recovery Chances has been improved
- A warning message appears when the user tries to close tabs with open disks/partitions
- The recovered part of a file will remain when the recovery process has been interrupted

Fixed:
- R-Studio may freeze when opening a RAID created from disk images
- The Logical Sector Size parameters may have appeared twice on the IDE Properties tab
- R-Studio may have frozen when creating an image of a recognized partition
- Files didn't appear in the Find Results panel after they were unmasked if file sorting tabs were switched
- R-Studio may not have found a file by its exact size
- FAT cross-linked folders may have been processed incorrectly
- Zero-sized files could be viewed in the built-in Text/Hexadecimal Editor and file previewer
- The FAT32 bitlocker to go couldn't be recognized
- A disk letter for a bitlocker volume didn't change when the disk letter for its partition was changed
- An image file from a remote computer could not be saved to either the remote computer or local one


R-Studio 8.17 build 180955
- Change log not available for this version


R-Studio 8.16 build 180499
New Features:
- Several file systems (the main and several reformatted ones) can now be found on one partition, if their traces remain in the boot records

Improvements:
- APFS file systems and APFS Fusion Drives can be recognized on a pure hard drive without protective GPT partitions
- The program checks that it works with the USB Stabilizer

Fixed:
- The program may have gone into a loop and frozen at the last stage of partition recognition
- The program may sometimes have frozen when recognizing the file system
- When a partition without a file system on a MBR disk was formatted, the partition divided into a not-equal volume and partition. The were shown as two different objects
- When R-Studio found a direct volume on a flash drive, it didn't search for deleted partitions


R-Studio 8.15 build 180125
- Change log not available for this version


R-Studio 8.15 build 180091
- Change log not available for this version


R-Studio 8.15 build 180015
New features:
- Virtual objects, like virtual RAIDs and regions, can be connected to the system as read-only virtual drives. Such drives are visible in and accessible to the system and other programs. (Technician version)
- Folders, which are symbolic links to other folders (targets), can be shown as links, without showing the content of the targets. (Technician version)
- Support for deduplication in the NTFS file system created by Windows Server 2019 has been added.
- Support for the ReFS file system created by Windows Server 2019, including deduplication, has been added
- R-Studio Emergency can now run in 64-bit mode and use all available RAM to recover large hard drives

Improvements:
- Recognition of NTFS file systems with some wiped parts has been improved
- Icons have been redesigned for better resizing on HiDPI screens
- Recognition of fat16/32 folders with small numbers (1-2) of files has been improved
- Recognition of ext2/3/4 partitions with block sizes <=1024 bytes has been improved
- Folder links comparison has been added for recognized ext2/3/4 file systems to improve the recognition of very small file systems (1 group/cylinder block) and the quality of recognized partitions

Bug-fixes:
- The program may have frozen during the opening or scan of some images
- The warning that a mask was applied my have not shown on tab titles
- NTFS file systems with the cluster size of 64k may have been processed incorrectly
- Scan info for objects found during the fast scan for lost partitions may have been saved/loaded incorrectly (incorrect parent objects)


R-Studio 8.14 build 179693
Fixed:
- R-Studio may have sometimes failed to find NTFS partitions without boot records
- File previewer didn't correctly display filenames with right to left scripts
- Sometimes it was hard to distinguish between font and highlight colors


R-Studio 8.14 build 179675
- Change log not available for this version


R-Studio 8.14 build 179623
- Change log not available for this version


R-Studio 8.14 build 179611
New features:
- Fast search for lost partitions has been added.
- Support for the ISO9660 file system used in CDs/DVDs/ISO images has been added.
- Support for the UStar/Tar/CPIO/Pax file systems used in tape storage devices has been added (Technician version).

Improvements:
- Extended control over file preview has been added. Files can now be marked for recovery, recovered, etc., directly from the built-in File previewer.
- Extended control and display of scanned and unscanned disk areas has been added.
- A special mark has been added for a folder with marked files that are hidden by the applied mask.
- A complete overhaul of symbolic and other links processing has been made.
- An option to recover only marked files matching the applied file mask or all marked files has been added to the Recover dialog box.
- The algorithm that estimates chances for successful file recovery has been improved.
- Interface localizations have been improved.

Bug-fixes:
- R-Studio parsed only the GPT partition table, even when it was invalid, when both LDM/MBR and LDM/GPT were present on the disk. Fixed.
- The Recover marked command was inactive if marked files were invisible due to the applied file mask. Fixed.
- The Copy information command copied the information from the previous file when the information of the selected file didn't exist. Fixed.
- The Expand All command for the folder tree may have frozen on partitions with large numbers of folders. Fixed.
- The number of marked files may have been displayed incorrectly when the view was changed from Real, by Extension, by Time, etc. Fixed.
- Sometimes R-Studio may have crashed during file recovery. Fixed.
- Sometimes the built-in previewer may have frozen when showing damaged files. Fixed.
- Scan time and progress may have been displayed incorrectly while scanning several regions. Fixed.
- Disk scan may have crashed or frozen during the process and an attempt to stop it. Fixed.
- The Rescan the entire disk command may have failed for an already scanned disk. Fixed.
- The Scan dialog didn't size units when it was closed and then opened again. Fixed.
A lot of symlink processing bugs have been fixed, two being worst:
- If there was a symlink to another folder in a place to store recovered files, and there was a folder in the data for recovery which name coincided with that symlink's folder, the recovered data was written to the symlink's folder. That may have resulted in complete loss of files stored in the symlink's folder. Fixed. Now R-Studio saves recovered files only within the path(s) specified for storing recovered files.
- When files were marked and then umarked in a folder that was a symlink, the files in its target were unmarked, too. Fixed.
- Disс information wasn't renewed when the CD was ejected and the Refresh command was executed. Fixed.
- R-Studio tried to access an attached CD/DVD drive during device refresh which may have resulted in temporal freeze. Fixed. Now R-Studio accesses a CD/DVD drive only when it works with it. Fixed.
- Disk size wasn't shown for a CD/DVD disc under WIndows NT. Fixed.
- R-Studio may have temporally frozen while switching between the Real, Extension, XXX Time views for partitions with many folders. Fixed.
- Many internal bugfixes to improve program's efficiency.
- Hexadecimal editor may have frozen while opening a multi-volume image. Fixed.


R-Studio 8.14 build 179597
New features:
- Fast search for lost partitions has been added
- Support for the ISO9660 file system used in CDs/DVDs/ISO images has been added
- Support for the UStar/Tar/CPIO/Pax file systems used in tape storage devices has been added (Technician version)

Improvements:
- Extended control over file preview has been added. Files can now be marked for recovery, recovered, etc., directly from the built-in File previewer
- Extended control and display of scanned and unscanned disk areas has been added
- A special mark has been added for a folder with marked files that are hidden by the applied mask
- A complete overhaul of symbolic and other links processing has been made
- An option to recover only marked files matching the applied file mask or all marked files has been added to the Recover dialog box
- The algorithm that estimates chances for successful file recovery has been improved

Bug-fixed:
- R-Studio parsed only the GPT partition table, even when it was invalid, when both LDM/MBR and LDM/GPT were present on the disk. Fixed
- The Recover marked command was inactive if marked files were invisible due to the applied file mask. Fixed
- The Copy information command copied the information from the previous file when the information of the selected file didn't exist. Fixed
- The Expand All command for the folder tree may have frozen on partitions with large numbers of folders. Fixed
- The number of marked files may have been displayed incorrectly when the view was changed from Real, by Extension, by Time, etc. Fixed
- Sometimes R-Studio may have crashed during file recovery. Fixed
- Sometimes the built-in previewer may have frozen when showing damaged files. Fixed
- Scan time and progress may have been displayed incorrectly while scanning several regions. Fixed
- Disk scan may have crashed or frozen during the process and an attempt to stop it. Fixed
- The Rescan the entire disk command may have failed for an already scanned disk. Fixed
- The Scan dialog didn't size units when it was closed and then opened again. Fixed
A lot of symlink processing bugs have been fixed, two being worst:
- If there was a symlink to another folder in a place to store recovered files, and there was a folder in the data for recovery which name coincided with that symlink's folder, the recovered data was written to the symlink's folder. That may have resulted in complete loss of files stored in the symlink's folder. Fixed. Now R-Studio saves recovered files only within the path(s) specified for storing recovered files.
- When files were marked and then umarked in a folder that was a symlink, the files in its target were unmarked, too. Fixed.
- Disс information wasn't renewed when the CD was ejected and the Refresh command was executed. Fixed.
- R-Studio tried to access an attached CD/DVD drive during device refresh which may have resulted in temporal freeze. Fixed. Now R-Studio accesses a CD/DVD drive only when it works with it. Fixed.
- Disk size wasn't shown for a CD/DVD disc under WIndows NT. Fixed.
- Hexadecimal editor may have frozen while opening a multi-volume image. Top


R-Studio 8.13 build 176095
- Change log not available for this version


R-Studio 8.13 build 176093
- Change log not available for this version


R-Studio 8.13 build 176051
- Change log not available for this version


R-Studio 8.13 build 176037
New features:
-  Deleted partitions can be instantly found, without long scan
-  Files can be recovered or marked for recovery directly from File previewer
-  The number of read tries for bad sectors can be changed during a disk operation

Improvements:
-  DeepSpar Disk Imager sector status data is also used to estimate the chances of successful file recovery
-  FAT folders partially damaged within sectors are also enumerated

Bugfixes:
- No messages appeared in the log when a scan process was interrupted
- When R-Studio accessed data inside an already opened part of a multi-part image, a request to open this part may have appeared
- A multi-part image may have been opened incorrectly if the parts were small
- Log information may have been incorrect when recovery was interrupted
- When opening the next in turn part of a multi-part image, it was possible to click the OK button without entering the required file name. The part was lost and no more inquires were issued.
- Sometimes the program may have sent a wrong message about not enough space when the image was written to alternative paths
- The Advanced Scan dialog box may have been shown incorrectly
- R-Studio may have frozen or crashed while opening file systems
- The best copy of the FAT table for FAT12/16 file systems was determined incorrectly when it was determined sector-wise
- The path dialog box on the remote computer may have delayed for a long time if there were unaccessible connected network drives
- R-Studio may have found waste copies of GPT partitions if a GPT disk was reformatted to an LDM/MBR disk
- The program may have found some garbage GPT partition entries when those entries were re-written. Fixed. Now R-Studio checks their validity and cancels invalid r
- Partitions could not be copied to an HDD with several partition tables (i.g., a GPT table and some deleted ones)
- An extended debug file system snapshot could not be saved for disks with unsupported encryption methods

Text/hexadecimal editor:
- The offset field in the GoTo dialog box may have been shown incorrectly. Fixed.
- Strings may have been truncated on the Find Results panel. Fixed.


R-Studio 8.12 build 175721
New features:
- Support for the compression algorithms lzvn and lzfse has been added. They are used in the new HFS+/APFS versions.

Bugfixes:
- R-Studio may have crashed when creating an ext4 FS metadata image. Or it may have created it slowly. Fixed.
- R-Studio may sometimes have crashed when opening heavily corrupted file systems. Fixed.


R-Studio 8.12 build 175573
- Change log not available for this version


R-Studio 8.12 build 175481
New Features:
- Support for the APFS file system created by macOS Catalina has been added
- Support of the APFS Fusion Drive has been added
- Several paths can be immediately specified for multiple-volume images

Technician version:
- Alternative paths can be specified for places to store recovered files and images

Post Action options have been added for unattended operations:
- Automatic shutdown once lengthy operations have completed: file recovery, disk scan, and disk imaging. When this option is specified, R-Studio checks that all relevant information (scan info, RAID layouts, etc) has been saved and advanced recovery features specified
- Automatic email notification regarding operation success/failure.

Improvements:
- Search for deleted files has been improved for the Ext2/3/4 and UFS1/UFS2 file systems
- File system reconstruction has been improved for APFS partitions


R-Studio 8.11 build 175479
New features:
- Automatic recognition and assembly of complex disk manager objects whose components are also various disk manager objects. This may be useful for data recovery from various NAS devices
- Updated Windows driver that can mount R-Drive Image type (.rdr) images of hard drives, besides logical disks, as virtual hard drives in the system

Improvements:
- The Open folder when done option has been added to the Recover dialog box
- File enumeration speed has been increased by several dozen times for Ext2/3/4 and UFS1/UFS2 partitions
- Folder scan to improve folder tree reconstruction on recognized Ext2/3/4 and UFS1/UFS2 partitions
- Ext4fs extent reconstruction for large deleted files even if they are not in the file system journal
- Network data recovery speed has been increased by several dozen times

Bug-fixes:
- R-Studio may have opened some partitions with large numbers of files for a long time
- The path selection dialog box may have frozen if some network drives were connected to the system under a user account
- R-Studio may have crashed during performing recheck recovery chances
- Volume labels may have been detected incorrectly for UFS1 partitions
- Idle RAID sequences may have appeared when a custom RAID was created. Those sequences could not be deleted
- When an invalid RAID table was applied, the program didn't throw a warning
- An incorrect minimum number of RAID table lines may have appeared for RAID0 and RAID4
- The cursor may have moved incorrectly when editing the RAID table
- Unit fields (TB, GB, MB) in the RAID editor may have worked incorrectly
- The Refresh DDI command may have appeared even when the DDI device was not connected


R-Studio 8.11 build 175357
New features:
- Automatic recognition and assembly of complex disk manager objects whose components are also various disk manager objects. This may be useful for data recovery from various NAS devices.
- Updated Windows driver that can mount R-Drive Image type (.rdr) images of hard drives, besides logical disks, as virtual hard drives in the system.

Improvements:
- The Open folder when done option has been added to the Recover dialog box.
- File enumeration speed has been increased by several dozen times for Ext2/3/4 and UFS1/UFS2 partitions.
- Folder scan to improve folder tree reconstruction on recognized Ext2/3/4 and UFS1/UFS2 partitions.
- Ext4fs extent reconstruction for large deleted files even if they are not in the file system journal.
- Network data recovery speed has been increased by several dozen times.

Bug-fixes:
- R-Studio may have opened some partitions with large numbers of files for a long time. Fixed.
- The path selection dialog box may have frozen if some network drives were connected to the system under a user account. Fixed.
- R-Studio may have crashed during performing recheck recovery chances. Fixed.
- Volume labels may have been detected incorrectly for UFS1 partitions. Fixed.
- Idle RAID sequences may have appeared when a custom RAID was created. Those sequences could not be deleted. Fixed.
- When an invalid RAID table was applied, the program didn't throw a warning. Fixed.
- An incorrect minimum number of RAID table lines may have appeared for RAID0 and RAID4. Fixed.
- The cursor may have moved incorrectly when editing the RAID table. Fixed.
- Unit fields (TB, GB, MB) in the RAID editor may have worked incorrectly. Fixed.
- The Refresh DDI command may have appeared even when the DDI device was not connected. Fixed.


R-Studio 8.11 Build 175351
- Change log not available for this version


R-Studio 8.10 Build 173987
Improvements:
- LVM processing has been improved

Bugfixes:
- Empty sequences were generated in the Sequences window when the Custom RAID type was selected. Those sequences could not be deleted
- The last valid RAID block order table was saved rather than the current invalid table
- The Get Info window showed wrong file info when sorting had been changed
- Clicking an empty space on the Get Info window opened Hexadecimal editor
- Files remained marked when files were recovered with the Do not recover duplicate files from Extra Found Files option enabled
- Not all information on Overlapping files and Regions when saving file names
- The Find/Mark dialog box didn't preserve selections for the Look At Files/Folders option
- A file and folder may have the same ID on the time/extension sorting tabs. Clicking such object may have resulted in jumping to another object with the same ID. For example, to a file with an ID randomly coinciding with the ID of a folder
- Saving file names for marked files didn't save names for files with links in their paths. Only link name was saved without files in the related folder
- Some small interface and cosmetic bugs have been fixed


R-Studio 8.10 Build 173981
- Change log not available for this version


R-Studio 8.10 Build 173857
- Change log not available for this version


R-Studio 8.9 Build 173593
Bug-fixes:
- The program may have crashed when parsing damaged xattr on the UFS2 file system
- Some small internal bugfixes


R-Studio 8.9 Build 173589
New features:
- Estimation of chances for successful file recovery
- Recovery of names and paths for files deleted to Recycle Bin and Trash
- Support for ReFS 3.4 file system

Improvements:
- A complete redesign of the Find/Mark dialog box.
- The parsing and reconstruction of the FAT32 and NTFS file systems has been improved.
- The parsing of scanned APFS partitions has been improved, especially for large APFS file systems, for which the decrease of parsing time may reach several thousand times.

Bug-fixes:
- Large ext4 file systems (60+TB) may have been processed incorrectly. Fixed.
- Sometimes the program may have crashed or frozen during file enumeration and disk scan. Fixed.
- The program may have written data to network drives incorrectly. Fixed.
- Sometimes file systems on automatically created virtual RAIDs may have been created incorrectly when the RAID parents were disk images. Fixed.

更新時間：2022-08-31
更新細節：

What's new in this version:

Bitdefender Total Security 2021 Build 26.0.23.80 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.21.78 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.18.75 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.16.69 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.14.65 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.14.62 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.12.59 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.12.56 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.10.45 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.7.41 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.7.34 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.1.21 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 26.0.1.15 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 25.0.26.89 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 25.0.23.81 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 25.0.21.78 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2021 Build 25.0.19.75 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 25.0.10.52 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 25.0.7.34 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 25.0.3.24 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 25.0.2.14 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.26.138 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.24.131 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.24.121 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.20.116 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.16.91 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.12.72 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.9.52 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2020 Build 24.0.3.15 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2019 Build 23.0.24.120 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2019 Build 23.0.22.97 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2019 Build 23.0.16.72 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2019 Build 23.0.8.17 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.21.297 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.19.242 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.18.224 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.18.222 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.17.205 (64-bit)

This version fixes the following issues:
- An issue where the contextual menu would be missing
- An issue where the SafePay virtual keyboard could be moved outside of reach
- An issue where the Wallet would show as enabled in Firefox but disabled in the product
- An issue where the Bitdefender Agent would report that the services are not responding
- An issue where the user was unable to delete/mark as read notifications
- An issue where the Webcam Protection module would crash the Windows Camera and Camera 365 from Toshiba
- An issue where the Autopilot would re-enable itself after coming out of Sleep or after a reboot
- An issue where the product would disconnect PIA VPN

The following improvements were included:
- Several interface improvements
- Augmented the Support Tool's ability to gather Bitdefender relevant data
- Better WSC integration on Windows 10
- Implemented multiple .exe selection in ATD Whitelist
- Product performance and stability tweaks
- Product password now protects the Account tab
- Several improvements to the DiskCleanup module
- Several improvements to the Safe Files module


Bitdefender Total Security 2018 Build 22.0.15.189 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2018 Build 22.0.12.161 (64-bit)

This version fixes the following issues:
- Fixed an issue with Active Threat Defense not activating
- Fixed an issue where the product would show "Last Update Never"
- Fixed an issue where the offline weekly updates would not detect Bitdefender 2018
- Fixed an issue where Google would report SafePay is an outdated browser
- Fixed an issue where Custom Scans would not be saved after switching to Aggressive
- Fixed an issue where SafePay couldn't save bank statements(PDF) on hsbc.co.uk

The following improvements were included:
- Wallet's compatibility with several websites
- Several Improvements to the in-product Support Tool
- Several interface improvements
- Various Install Engine optimizations
- Various SafePay optimizations and security improvements
- Several Firewall improvements
- Several Advanced Threat Defense improvements
- Improved compatibility with upcoming Windows release
- Several OneClick Optimizer improvements


Bitdefender Total Security 2018 Build 22.0.10.141 (64-bit)

This version fixes the following issues:
- Fixed an issue where the Ransomware Protection(Safe Files) causes the TaskBar icons to hide
- Fixed an issue causing the Agent to initialize improperly causing the product to stay into a inactive state
- Fixed an issue causing the product to block internet access after a period of time
- Fixed an issue where the SafePay notification would appear several times for some banks
- Fixed an issue where the Vulnerability Scan would show a blank window for Critical Windows Updates.
- Fixed an issue where the Reset Settings for Bitdefender Shield would not prompt for confirmation
- Fixed an issue where as the Security Report would display extra days in a month
- Fixed an issue where as the text in the GUI would be displayed with a slight delay
- Fixed an issue where the SafePay Virtual Keyboard would enter the text into the address bar by default
- Fixed an issue where the Open With contextual menu would be disabled once the subscription expires
- Fixed an issue where the Widget would reset its position after a reboot
- Fixed a rare issue where the Name/eMail/Device would not be displayed in the Account Info page
- Fixed a rare issue where as SafePay could not perform a login into certain banking websites
- This version fixes the vulnerability FG-VD-17-019 reported by Fortinet’s FortiGuard Labs through responsible disclosure

The following improvements were included:
- Several interface improvements
- USB Immunizer functionality was augmented
- Improved the security of the Install Engine
- Various optimizations to the Install Engine
- Added link to the Bitdefender Uninstall Tool should the Install Engine fail to deploy drivers
- Various optimizations to the Scan Engine
- Various optimizations to the Update Engine
- Various optimizations to the SafePay browser
- Various optimizations to the Firewall - Adapter Engine
- Various optimizations to the Webcam Protection module
- Added Dynamic Adapter type (It will setup itself depending on your Windows Adapter setting : Home/Office type settings for the Private Network and Public for the Public Network)
- Added the ability to copy/paste information from Notifications
- Improvements leading to better compatibility with the next Windows Security Center update


Bitdefender Total Security 2018 Build 22.0.8.114 (64-bit)
- The new generation of the award-winning line introduces a multi-layer defense against ransomware, the malware outbreak that’s evading many detection filters and encrypting users' documents then demanding ransom to decrypt them. Advanced Threat Defense finds patterns of behavior to detect and block even the newest threats while Real Time Protection instantly stops all known threats. As an additional protection, the new Safe Files feature prevents unauthorized alterations to sensitive files.
- User privacy, a growing concern among users in an era of state-sponsored espionage, mass data theft and the proliferation of hackers, is enhanced in the latest Bitdefender product line, with innovations such as Webcam Protection that prevents webcam spying, fending off snoops, blackmailers and others.
- The new Firewall makes it easy for non tech savvy users to take full advantage of this essential safety feature. Account Privacy for iOS and Android checks if any of your e-mails have been leaked, and may be used in subsequent targeted attacks or for extortion.


Bitdefender Total Security 2017 Build 21.0.25.92 (64-bit)
- Change log not available for this version


Bitdefender Total Security 2017 Build 21.0.23.1101 (64-bit)

This version fixes the following issues:
- Fixed a crash caused by the Update module
- Fixed a rare crash caused by SafePay
- Fixed a issue with the Firefox extension signatures
- Fixed a issue causing the Bitdefender window to shift to the right
- Fixed a issue causing the Wallet to prompt for the account on the same browser session
- Fixed a issue where the Agent failed to stop
- Fixed a issue where the Wallet would display empty lists when scrolling down the menu
- Fixed a rare crash causing vsserv to crash
- Fixed a crash caused by SafePay
- Fixed a crash caused by the Agent
- Fixed a issue causing the Agent not to deploy properly
- Fixed a issue where the Custom Scan would not start at the proper time
- Fixed a issue where the email archives would be purged from the Quarantine
- Fixed a rare issue causing the Uninstaller to crash
- Fixed a issue where the Security Report would show the improper period
- Fixed a issue where the product would revert the default language to English after a repair
- Fixed a issue where SafePay would not keep the zoom settings from the previous session
- Fixed a issue causing SafePay to be unable to open PDF files

The following improvements were included:
- The product now complies with the Microsoft DSA requirements
- Several improvements to the install engine
- Improved repair process
- Several improvements to the On-Access engine
- Product interface fixes and improvements
- Improved SafePay's functionality
- Several improvements to the product's self-defense mechanism
- Improved the way the Support Tool gathers Bitdefender related information
- Improvements to the Firewall engine
- Improved Wallet's compatibility with several websites
- Added support for the polish language
- Some improvements to the event engine
- Improved the way the product handles remote tasks (example : system scan from Central)
- Improved the way the product integrates with the Windows start-up process
- Some improvements to the Update engine


Bitdefender Total Security 2017 Build 21.0.22.1050 (64-bit)

This version fixes the following issues:
- Fixed a issue where the setup window would not show-up properly on high DPI machines
- Fixed a issue where the Trial would not start on a new account
- Fixed a issue where two Uninstall Surveys would open upon removing the product
- Fixed a rare issue where the Switch Account button would not activate on a expired account
- Fixed a rare crash caused by the Widget
- Fixed a rare crash caused by the Agent
- Fixed a issue where Wallet would not function under SafePay
- Fixed a issue where Paranoid Mode would block a connection without notification
- Fixed a issue where events would not be generated under Home/Office
- Fixed a issue where Aero was causing buttons to disappear from the UI
- Fixed a crash caused by the Subscription engine
- Fixed a issue where the OneClick Optimizer would places.sqlite in Firefox
- Fixed a rare issue where the Setup window would relocate randomly
- Fixed a issue where kabelmail.de users would not receive emails with the Anti-Spam enabled
- Fixed a issue where the Paranoid option would be available after disabling AVC
- Fixed a issue where the Setup engine could not create install folders
- Fixed a rare crash caused by the Notification Engine
- Fixed a issue where the Update frequency slider would revert to the default setting
- Fixed a rare crash caused by the Proxy handler
- Fixed a rare issue where the task for the Agent couldn't be created
- Fixed a issue where Wallet wouldn't autofill on Amazon and eBay
- Fixed a rare crash caused by the Settings handler
- Fixed a issue where the Security Report would show 0 files in the Vault
- Fixed a issue where the Vulnerability Scan would show the incorrect size of Windows Updates
- Fixed a rare crash caused by Bitdefender's Photon
- Fixed a issue where SafePay would randomly freeze on Surface Pro 3 devices
- Fixed a rare issue where the Widget would still show the animation for the Vulnerability Scan even after it has been completed
- Fixed a issue where the main interface would open after a delay when accessed from the system tray icon
- Fixed a issue where you the option to shutdown the machine after the scan would not be available

The following improvements were included:
- Product interface fixes and improvements
- Several improvements to the Install Engine
- Various improvements to the registration logic
- Various improvements to the way the product reports errors
- Various improvements to the Firewall Module
- SafePay performance improvements
- Enhanced the way the product uninstalls itself from the system
- Improvements to the product's self-protect function
- Moved the Delete button from Wallet edit mode in view mode
- Wallet now displays the name of the wallet when asking for the password
- Improved Wallet's compatibility with several websites
- Added the option to enable Domain discovery (printer and shares) when the Adapter is set as Home/Office
- Improved the way Bitdefender scans emails through SSL/TLS/STARTTLS


Bitdefender Total Security 2017 Build 21.0.22.1011 (64-bit)

This version fixes the following issues:
- Fixed a issue where the "Prompt before download" window would not show
- Fixed a crash caused by Traffic Light
- Fixed a crash caused by the On-Access engine
- Fixed a error where Disk Cleanup would just stop
- Fixed a issue where the Optimizer would not start
- Fixed a rare crash caused by the Wallet
- Fixed a rare crash caused by some wireless adapters
- Fixed a rare crash caused by some Nvidia drivers
- Fixed a rare crash caused by Windows Crypto API
- Fixed a crash caused by Wi-Fi advisor when system locale is set to any Asian language
- Fixed a issue where the Home Wi-Fi would show as untrusted
- Fixed a display issue where the pie chart for the Startup Optimizer would be completely grey
- Fixed a issue where all blocked applications would gain internet access after a Agent crash
- Fixed a memory leak in Snap Photo
- Fixed a issue where a scheduled scan would not run at the proper time
- Fixed a issue where the Events(Notifications) would not ask for the Settings password and allow access
- Fixed a issue where the number of days to delete content in the Quarantine woudl revert to the default number
- Fixed a issue where the Eicar test files were not counted in the Live Stats
- Fixed a issue where the title of the product is Total Security instead of the current installed product (AntiVirus / Internet Security)
- Fixed a issue where the Ransomware Protection Event is deleted under certain situations
- Fixed a issue where the "Remind me later" notification would pop-up continuously

The following improvements were included:
- Product interface fixes and improvements
- Various improvements for the install engine
- Improved the way competitive products are being removed
- Various security and functionality improvements for SafePay
- Various improvements and compatibility fixes for the Wallet
- Desktop/Music/Videos are now added as default protected zones under the Ransomware Protection
- Improved the way notifications are handled
- Improved the way trial subscriptions are being handled
- Added the possibility to remove Wi-Fi profiles
- Improved the functionality of the Wi-fi Advisor


Bitdefender Total Security 2017 Build 21.0.21.967 (64-bit)
- Change log not available for this version

更新時間：2017-11-10
更新細節：

What's new in this version:

Bitdefender Total Security 2018 Build 22.0.15.189 (64-bit)
- Change log not available for this version

Bitdefender Total Security 2018 Build 22.0.12.161 (64-bit)
This version fixes the following issues:
- Fixed an issue with Active Threat Defense not activating
- Fixed an issue where the product would show "Last Update Never"
- Fixed an issue where the offline weekly updates would not detect Bitdefender 2018
- Fixed an issue where Google would report SafePay is an outdated browser
- Fixed an issue where Custom Scans would not be saved after switching to Aggressive
- Fixed an issue where SafePay couldn't save bank statements(PDF) on hsbc.co.uk

The following improvements were included:
- Wallet's compatibility with several websites
- Several Improvements to the in-product Support Tool
- Several interface improvements
- Various Install Engine optimizations
- Various SafePay optimizations and security improvements
- Several Firewall improvements
- Several Advanced Threat Defense improvements
- Improved compatibility with upcoming Windows release
- Several OneClick Optimizer improvements

Bitdefender Total Security 2018 Build 22.0.10.141 (64-bit)
This version fixes the following issues:
- Fixed an issue where the Ransomware Protection(Safe Files) causes the TaskBar icons to hide
- Fixed an issue causing the Agent to initialize improperly causing the product to stay into a inactive state
- Fixed an issue causing the product to block internet access after a period of time
- Fixed an issue where the SafePay notification would appear several times for some banks
- Fixed an issue where the Vulnerability Scan would show a blank window for Critical Windows Updates.
- Fixed an issue where the Reset Settings for Bitdefender Shield would not prompt for confirmation
- Fixed an issue where as the Security Report would display extra days in a month
- Fixed an issue where as the text in the GUI would be displayed with a slight delay
- Fixed an issue where the SafePay Virtual Keyboard would enter the text into the address bar by default
- Fixed an issue where the Open With contextual menu would be disabled once the subscription expires
- Fixed an issue where the Widget would reset its position after a reboot
- Fixed a rare issue where the Name/eMail/Device would not be displayed in the Account Info page
- Fixed a rare issue where as SafePay could not perform a login into certain banking websites
- This version fixes the vulnerability FG-VD-17-019 reported by Fortinet’s FortiGuard Labs through responsible disclosure

The following improvements were included:
- Several interface improvements
- USB Immunizer functionality was augmented
- Improved the security of the Install Engine
- Various optimizations to the Install Engine
- Added link to the Bitdefender Uninstall Tool should the Install Engine fail to deploy drivers
- Various optimizations to the Scan Engine
- Various optimizations to the Update Engine
- Various optimizations to the SafePay browser
- Various optimizations to the Firewall - Adapter Engine
- Various optimizations to the Webcam Protection module
- Added Dynamic Adapter type (It will setup itself depending on your Windows Adapter setting : Home/Office type settings for the Private Network and Public for the Public Network)
- Added the ability to copy/paste information from Notifications
- Improvements leading to better compatibility with the next Windows Security Center update

Bitdefender Total Security 2018 Build 22.0.8.114 (64-bit)
- The new generation of the award-winning line introduces a multi-layer defense against ransomware, the malware outbreak that’s evading many detection filters and encrypting users' documents then demanding ransom to decrypt them. Advanced Threat Defense finds patterns of behavior to detect and block even the newest threats while Real Time Protection instantly stops all known threats. As an additional protection, the new Safe Files feature prevents unauthorized alterations to sensitive files.
- User privacy, a growing concern among users in an era of state-sponsored espionage, mass data theft and the proliferation of hackers, is enhanced in the latest Bitdefender product line, with innovations such as Webcam Protection that prevents webcam spying, fending off snoops, blackmailers and others.
- The new Firewall makes it easy for non tech savvy users to take full advantage of this essential safety feature. Account Privacy for iOS and Android checks if any of your e-mails have been leaked, and may be used in subsequent targeted attacks or for extortion.

Bitdefender Total Security 2017 Build 21.0.25.92 (64-bit)
- Change log not available for this version

Bitdefender Total Security 2017 Build 21.0.23.1101 (64-bit)

This version fixes the following issues:
- Fixed a crash caused by the Update module
- Fixed a rare crash caused by SafePay
- Fixed a issue with the Firefox extension signatures
- Fixed a issue causing the Bitdefender window to shift to the right
- Fixed a issue causing the Wallet to prompt for the account on the same browser session
- Fixed a issue where the Agent failed to stop
- Fixed a issue where the Wallet would display empty lists when scrolling down the menu
- Fixed a rare crash causing vsserv to crash
- Fixed a crash caused by SafePay
- Fixed a crash caused by the Agent
- Fixed a issue causing the Agent not to deploy properly
- Fixed a issue where the Custom Scan would not start at the proper time
- Fixed a issue where the email archives would be purged from the Quarantine
- Fixed a rare issue causing the Uninstaller to crash
- Fixed a issue where the Security Report would show the improper period
- Fixed a issue where the product would revert the default language to English after a repair
- Fixed a issue where SafePay would not keep the zoom settings from the previous session
- Fixed a issue causing SafePay to be unable to open PDF files

The following improvements were included:
- The product now complies with the Microsoft DSA requirements
- Several improvements to the install engine
- Improved repair process
- Several improvements to the On-Access engine
- Product interface fixes and improvements
- Improved SafePay's functionality
- Several improvements to the product's self-defense mechanism
- Improved the way the Support Tool gathers Bitdefender related information
- Improvements to the Firewall engine
- Improved Wallet's compatibility with several websites
- Added support for the polish language
- Some improvements to the event engine
- Improved the way the product handles remote tasks (example : system scan from Central)
- Improved the way the product integrates with the Windows start-up process
- Some improvements to the Update engine

Bitdefender Total Security 2017 Build 21.0.22.1050 (64-bit)

This version fixes the following issues:
- Fixed a issue where the setup window would not show-up properly on high DPI machines
- Fixed a issue where the Trial would not start on a new account
- Fixed a issue where two Uninstall Surveys would open upon removing the product
- Fixed a rare issue where the Switch Account button would not activate on a expired account
- Fixed a rare crash caused by the Widget
- Fixed a rare crash caused by the Agent
- Fixed a issue where Wallet would not function under SafePay
- Fixed a issue where Paranoid Mode would block a connection without notification
- Fixed a issue where events would not be generated under Home/Office
- Fixed a issue where Aero was causing buttons to disappear from the UI
- Fixed a crash caused by the Subscription engine
- Fixed a issue where the OneClick Optimizer would places.sqlite in Firefox
- Fixed a rare issue where the Setup window would relocate randomly
- Fixed a issue where kabelmail.de users would not receive emails with the Anti-Spam enabled
- Fixed a issue where the Paranoid option would be available after disabling AVC
- Fixed a issue where the Setup engine could not create install folders
- Fixed a rare crash caused by the Notification Engine
- Fixed a issue where the Update frequency slider would revert to the default setting
- Fixed a rare crash caused by the Proxy handler
- Fixed a rare issue where the task for the Agent couldn't be created
- Fixed a issue where Wallet wouldn't autofill on Amazon and eBay
- Fixed a rare crash caused by the Settings handler
- Fixed a issue where the Security Report would show 0 files in the Vault
- Fixed a issue where the Vulnerability Scan would show the incorrect size of Windows Updates
- Fixed a rare crash caused by Bitdefender's Photon
- Fixed a issue where SafePay would randomly freeze on Surface Pro 3 devices
- Fixed a rare issue where the Widget would still show the animation for the Vulnerability Scan even after it has been completed
- Fixed a issue where the main interface would open after a delay when accessed from the system tray icon
- Fixed a issue where you the option to shutdown the machine after the scan would not be available

The following improvements were included:
- Product interface fixes and improvements
- Several improvements to the Install Engine
- Various improvements to the registration logic
- Various improvements to the way the product reports errors
- Various improvements to the Firewall Module
- SafePay performance improvements
- Enhanced the way the product uninstalls itself from the system
- Improvements to the product's self-protect function
- Moved the Delete button from Wallet edit mode in view mode
- Wallet now displays the name of the wallet when asking for the password
- Improved Wallet's compatibility with several websites
- Added the option to enable Domain discovery (printer and shares) when the Adapter is set as Home/Office
- Improved the way Bitdefender scans emails through SSL/TLS/STARTTLS

Bitdefender Total Security 2017 Build 21.0.22.1011 (64-bit)

This version fixes the following issues:
- Fixed a issue where the "Prompt before download" window would not show
- Fixed a crash caused by Traffic Light
- Fixed a crash caused by the On-Access engine
- Fixed a error where Disk Cleanup would just stop
- Fixed a issue where the Optimizer would not start
- Fixed a rare crash caused by the Wallet
- Fixed a rare crash caused by some wireless adapters
- Fixed a rare crash caused by some Nvidia drivers
- Fixed a rare crash caused by Windows Crypto API
- Fixed a crash caused by Wi-Fi advisor when system locale is set to any Asian language
- Fixed a issue where the Home Wi-Fi would show as untrusted
- Fixed a display issue where the pie chart for the Startup Optimizer would be completely grey
- Fixed a issue where all blocked applications would gain internet access after a Agent crash
- Fixed a memory leak in Snap Photo
- Fixed a issue where a scheduled scan would not run at the proper time
- Fixed a issue where the Events(Notifications) would not ask for the Settings password and allow access
- Fixed a issue where the number of days to delete content in the Quarantine woudl revert to the default number
- Fixed a issue where the Eicar test files were not counted in the Live Stats
- Fixed a issue where the title of the product is Total Security instead of the current installed product (AntiVirus / Internet Security)
- Fixed a issue where the Ransomware Protection Event is deleted under certain situations
- Fixed a issue where the "Remind me later" notification would pop-up continuously

The following improvements were included:
- Product interface fixes and improvements
- Various improvements for the install engine
- Improved the way competitive products are being removed
- Various security and functionality improvements for SafePay
- Various improvements and compatibility fixes for the Wallet
- Desktop/Music/Videos are now added as default protected zones under the Ransomware Protection
- Improved the way notifications are handled
- Improved the way trial subscriptions are being handled
- Added the possibility to remove Wi-Fi profiles
- Improved the functionality of the Wi-fi Advisor

Bitdefender Total Security 2017 Build 21.0.21.967 (64-bit)
- Change log not available for this version

更新時間：2016-07-05
更新細節：

What's new in this version:

Bitdefender Total Security 2016 Build 20.0.29.1517 (64-bit)
This version fixes the following issues:
- Rare issue where the firewall driver wasn't signed under Windows 7
- Issue where the Wallet menu wasn't opening properly
- Blank pages in SafePay while Hardware Acceleration is on
- Rare issue where the Agent couldn't handle the proper URL
- Rare issue where the Traffic Light module deactivates after 30 days
- Rare issue where the product's menu would crash
- Several User Interface display and localization issues
- Rare bug where the Battery profile would get corrupted
- Issue where the Ransomware module would block applications ran from network drives
- Minor issues with the installation process
- Issue where Xbox Teredo traffic is blocked under Windows 10
- Rare main process crash
- Issue where the AntiPhishing engine would be disabled after a fresh install
- Issue where the Security Report would show 0 files in Vault
- Issue where Ransomware protection would crash the main process
- Issue where Wallet would not save Skype credentials
- Issue where Bitdefender and Malwarebytes on the same system would cause a BSOD event

The following improvements were included:
- Several SafePay functions and compatiblity checks
- The firewall engine has been augumented
- Scan engine augumentations
- Agent functionality
- Update engine functionality
- Added support for longer path for the Profile engine
- Ransomware security augumentations
- Parental monitoring with improved functionality

Bitdefender Total Security 2016 Build 20.0.28.1478 (32-bit)
This version fixes the following issues:
- Rare main process crash generated by OneClick Optimizer
- Rare main process crash generated by TrafficLight
- Rare crash caused by the Agent
- Several User Interface display and localization issues
- Firewall contacting the cloud in a loop
- Inability to disable SafePay
- Rare bug in selecting the best server for the user

The following improvements were included:
- Agent's functionality has been augmented
- Product's ability to communicate with the cloud
- Central's ability to handle subscriptions
- SafePay's compatibility with other applications using overlays
- Product's ability to handle special characters when whitelisting websites
- Parental Control was renamed as Parental Advisor

Bitdefender Total Security 2016 Build 20.0.27.1467 (64-bit)
- Change log not available for this version