Acronis True Image 歷史版本列表 Page11

更新時間：2019-08-21
更新細節：

What's new in this version:

BYOND 512.1478
Fixes:
Dream Daemon:
- Setting world.fps or client.fps at runtime could sometimes cause messages to be sent to newly connecting clients before the client was ready to handle them, causing it to disconnect. This especially happened if such changes were done often
- Procs that ended because their src was deleted generated errors in world/Error() and were caught in try/catch, which they shouldn't have been
- client.view wasn't respected when set at compile time. This has been changed for all projects compiled in 512 or later
- Old code altering client.lazy_eye automatically when the world size was small resulted in some unexpected/annoying behavior, so it has been disabled for projects compiled in 512 or higher. Also, lazy_eye and EDGE_PERSPECTIVE interacted catastrophically in certain situations, causing a constant jump back and forth on each frame

Dream Maker:
- The icon editor was still limited to loading only 512 states, even though the reason for that restriction (the old icon editor) no longer exists

Dream Seeker:
- Parallel animations on the same filter didn't work as expected, causing the later animations to basically cancel out the earlier ones even if they applied to different parameters
- The output control didn't always show a scrollbar, once the scrollbar was needed, until the place it was supposed to be was clicked or the user scrolled up. This has been fixed after exhaustive, painstaking testing

Features:
Dream Maker:
- The hotspot indicator in the icon editor now correctly contrasts with a transparent background in dark mode


BYOND 512.1477
Dream Seeker:
- Regression: Statpanels got messed up by the grid formatting fix (Laser50)


BYOND 512.1475
Dream Daemon:
- Reading initial() failed for some vars, resulting in major runtime errors

Dream Maker:
S- tep offsets, pixel offsets, and bounds were not always set properly in the map editor


BYOND 512.1474
- Regression: Non-zero map zooms were broken


BYOND 512.1472
Fixes:
Dream Daemon:
- Filter list access for animations, setting vars, etc. sometimes resulted in spurious "index out of bounds" errors. (Lummox JR)
- The server did not send sound information properly, which prevented sound.environment from accepting 0 to reset the environment. (VolAs)
- MouseEntered() is now called right after MouseDrop() in response to the fact that the object under the cursor has changed. This call is generated on the server instead of the client. (Ter13)
- Case insensitivity was not properly handled in some complex regular expressions. (Altoids0)

Dream Maker:
- Several issues regarding global color changes in an icon have been fixed. (NSBR)
- The backspace key didn't work correctly in the loop count edit box of the icon pixmap editor. (Nadrew)
- The map editor suffered reduced performance. (Ter13)

Dream Seeker:
- Visual contents of objs and mobs did not reset in some cases when they were removed from the map and later re-added, but not deleted in the interim. (Mport2004)

Features:
Dream Maker:
- In the pixmap editor's movie area, you can now insert or delete entire columns. Using a regular delete when a column is selected will ask if you'd rather shift the other columns over. The new insert-columns and delete-columns commands have keyboard shortcuts Shift+Ins and Shift+Del, respectively


BYOND 512.1471
Dream Daemon:
- In some cases, the server did not properly send map chunk information that was necessary to handle big icons
- Some proc calls using the call() proc were misinterpreted, causing named arguments not to work correctly when calling those procs with an arglist()

Dream Maker:
- The map editor has had some updates to improve its ability to handle certain conditions like the use of BACKGROUND_LAYER
- The compiler did not include some vars in turf underlays that impacted their appearance, when those underlays used modified types (vars set in the map editor). This very old bug, which can be traced back to BYOND 324 because it impacted pixel offsets too, has been corrected
- Setting parent_type in a way that created a circular reference caused the compiler to hang or crash

Dream Seeker:
- Color matrices and certain situations applying alpha values did not mix properly, resulting in incorrect color matrix calculations
- alert() couldn't use buttons starting with a period, which resulted in some broken behavior
- blend_mode was not applied properly in icons using flick()

更新時間：2019-08-21
更新細節：

What's new in this version:

Bitvise SSH Client 8.35
- Fixed: with version 8.17, the profile settings RDP > Authentication > Password and Store encrypted password in profile were changed to take effect the same way as similar settings under Login > Authentication, but their UI layout was not updated


Bitvise SSH Client 8.34
- Change log not available for this version


Bitvise SSH Client 8.32
- Fixed an issue in how command line clients (sftpc, sexec, stermc, stnlc, spksc) were initializing the default key exchange algorithm list


Bitvise SSH Client 8.31
- This is not a new feature release, but a successor to 8.29 with continued maintenance updates. We skip versions containing zeros to avoid misunderstandings. For example, 8.03 and 8.30 might both be called "8.3"
- Added error descriptions for Windows error codes related to checking for new versions and downloading updates
- Fixed a memory safety issue which appears to be, but might not be, benign in most circumstances


Bitvise SSH Client 8.29
- Fixed an issue in previous 8.xx versions where, if the SSH Client had not been updated to a new version for longer than 42 days, trying to apply an update would fail due to a Windows registry Access denied error


Bitvise SSH Client 8.26
- Fixed issue introduced in version 8.25 where the recent locations drop-down in the graphical SFTP interface would no longer function correctly
- Fixed issue introduced in version 8.24 where the SSH Server Remote Control Panel could no longer be launched when connected to SSH Server versions 7.xx and earlier


Bitvise SSH Client 8.25

Graphical SFTP:
Auto-completion improvements:
- Regular files are no longer shown for auto completion of directory paths
- Tab and Shift+Tab now behave consistently with auto-completion in other apps
- File transfer events no longer cancel the auto-completion drop-down
- To improve UI responsiveness, directory listings are now performed in a background thread


Bitvise SSH Client 8.23
- Fixed an issue in previous 8.xx versions which would prevent Bitvise SSH Client and FlowSsh from connecting to a server that supports host key synchronization and employs a key type the client does not support. This affected connections from Windows XP and Windows Server 2003, where our cryptographic provider does not support Ed25519; and use under FIPS mode, where Ed25519 and ECDSA/secp256k1 are not supported


Bitvise SSH Client 8.22
- A proportion of users are closing the main SSH Client window when connected so that it minimizes into the Windows notification area (the system tray). Users forget about that SSH Client instance and launch new instances for new sessions. Forgotten sessions stay online indefinitely and terminal window settings do not appear to save because the SSH Client is never closed
- To fix this, the SSH Client will now restore its main window if it's still hidden in the notification area after closing a related window such as terminal or SFTP. This behavior can be configured with a new setting found under Closing and minimization
- Since the changes related to password authentication in 8.17, the graphical client's command line parameter -password=... did not take effect if the SSH Client profile was configured to use password authentication but the checkbox Store encrypted password in profile was disabled. Fixed
- sftpc: Updated help text for get and put commands to clarify how the -r and -o parameters control when hash-based synchronization, heuristic resume or overwrite is used


Bitvise SSH Client 8.21

- The graphical SSH Client's terminal window for xterm (and other non-bvterm terminals) implements a Select mode intended to behave like the Windows console's QuickEdit mode. A difference was catching users off-guard: canceling a mouse text selection with an arbitrary key press would not send the key to the server. For users who began a selection without noticing, it appeared as though the terminal window was eating a key press for no reason. Consistently with the Windows console, the SSH Client will now send key presses that cancel a selection to the server
- In previous versions, if the graphical SSH Client failed to load a profile specified on the command line, it would fall back to the last used profile and still act on the -loginOnStartup parameter if also provided. This would result in bewildering behavior. If a profile specified on the command line fails to load, the SSH Client now loads the default profile (stored in the Windows registry) and ignores -loginOnStartup
- In previous 8.xx versions, loading an SSH Client profile from a network share would fail when the ZoneId alternative data stream could not be opened. If the ZoneId ADS cannot be opened, a profile will now be loaded as if its origin is the local computer
- We have identified niche situations where one-click Remote Desktop forwarding might fail to start when an SSH Client DLL is not found. To resolve this, this version makes changes to how the Remote Desktop client is started
- There exist SSH clients which, in violation of RFC 4254, disconnect if a server sends a global request after successful authentication. A server might send a global request for purposes such as host key synchronization or disconnect detection. If the server supports RFC 8308, then to indicate it supports global requests, the SSH Client will include the extension global-requests-ok in its SSH_MSG_EXT_INFO
- In previous 8.xx versions, the SSH Client would not import RSA private and public keys larger than 8192 bits. This limit is once again 16384 bits
- The SSH Client installer will now offer to wait instead of exiting when another Bitvise installation is already in progress
- Slightly improved the user friendliness of the installer and uninstaller for command-line installations


Bitvise SSH Client 8.19
- In previous 8.xx versions, the icons for the New terminal console, New SFTP window and New Remote Desktop actions were too similar. The SSH Client now sports updated icons that are easier to distinguish
- In previous 8.xx versions, when the SSH Client reconnected after losing a connection, it failed to continue ongoing transfers. Fixed
- SFTP interface: When connecting to SFTP servers that support synchronization using the SFTP v6 extensions check-file-name, check-file-handle and check-file-blocks, the resume and overwrite modes are now more clearly overridden by synchronize in the SFTP user interface
- sftpc: When connecting to SFTP servers that support synchronization, the -r and -o options for get and put commands now both act as aliases for synchronize. Previously, only -o acted as an alias for synchronize, and -r was unavailable


Bitvise SSH Client 8.18
- In previous 8.xx versions, if the system clock was moved back after a check for updates (in UTC, not time zone specific), an automatic check would be repeated with high frequency. This could consume 80 kbps in bandwidth while the graphical SSH Client was running until the clock caught up. Fixed.
- In previous 8.xx versions, an automatic check for updates would be performed if the graphical SSH Client was run with -noRegistry. An automatic check is no longer performed in this situation, but can be performed manually


Bitvise SSH Client 8.17
- In version 8.15, loading a profile which was last saved by a previous version would cause the SSH Client to send an invalid elevation extension value to the server. This caused SSH Server versions 8.xx to disconnect. The SSH Client will now send a valid elevation extension value in this circumstance
- The Remote Desktop forwarding feature Use SSH login credentials would previously work only if the password authentication method was used for client authentication, but it did not work for password authentication over keyboard-interactive. This will now also work with password over keyboard-interactive
- In the graphical SSH Client, on the Login tab, setting Initial method to password could result in unintuitive behavior. Password change was not easily discoverable, and setting Initial method to password without entering a password caused the SSH Client to send an empty password at start of connection, incurring an authentication penalty
- This has been redesigned so that Initial method can be set to password without entering a password. In this case, a password dialog will dependably appear when connecting. As part of this change, it is no longer possible to enter a password on the Login tab without enabling Store encrypted password in profile
- In version 8.15, in command line clients, the -keypairFile parameter did not override a public key configured as an initial authentication method in a profile specified using -profile. The -keypairFile parameter will now once again override any public key configured in the profile


Bitvise SSH Client 8.15

Highlights:
- The SSH Client now supports automatic updates. An administrator can configure the SSH Client to automatically apply all updates; only recommended updates; only strongly recommended updates; to apply updates only manually; or to never check for updates
- Currently, the SSH Client does not install an update service. It needs to be started from time to time by an administrative user in order to apply updates
- The graphical SSH Client and sftpc now support recursive directory mirroring. A directory and all of its subdirectories and files can be synchronized either in the upload or download direction. The SSH Client can synchronize updated files and detect and automatically remove files and directories from the target location that are not present in the source
- The graphical SSH Client and sftpc can now display hashes (cryptographic digests) of local and remote files if the server supports the SFTP v6 check-file extension
- Bitvise SSH Client and SSH Server now implement automatic host key rotation. The SSH Client will synchronize keys from the SSH Server and any other servers that support the OpenSSH mechanism "hostkey update and rotation". The SSH Server will announce to clients all configured host keys, including those not employed, to facilitate host key rotation. The SSH Client will automatically trust new keys announced by a trusted server and remove any keys the server has removed, as long as they were added automatically
- The SSH Client now supports high resolutions and will display crisp text on high-DPI displays such as retina or 4K. The SSH Client now comes with new, higher resolution icons
- SSH Client profiles downloaded from the internet will now be considered unsafe. If a profile is marked by a browser using which it was downloaded as originating from an unsafe zone, the SSH Client will now load safe parts only. When loading a profile interactively in the graphical SSH Client, a prompt will be displayed, allowing the user to mark the profile as safe. If the user confirms, the profile can be fully loaded

Cryptography:
- Bitvise SSH Server, SSH Client and FlowSsh once again support non-standard DSA keys larger than 1024 bits. We do not recommend using these keys, and new keys of this type cannot be generated. Also, these keys cannot be used when FIPS mode cryptography is enabled in Windows. Re-adding support for these keys is intended to resolve an obstacle that may still be preventing some users of 6.xx versions from upgrading
- When using Windows cryptography, Bitvise SSH Server, SSH Client and FlowSsh now implement a backup strategy for DH and ECDH key exchange. Windows implements key exchange, but it does not expose the agreed value in a form suitable for SSH. Bitvise software must retrieve the value by carefully traversing undocumented Windows structures. In versions 7.xx, this required our software to be upgraded to continue working after the Windows 10 1803 update. Our software will now log a warning and fall back to Crypto++ if it cannot perform key exchange because Windows internal structures have changed. However: if FIPS mode is enabled in Windows, this backup strategy is not used, and the software must be updated
- When importing keys, such as from files, the stage at which an import failed is now described in more detail

SSH session:
- Bitvise SSH Server and Client now support the elevation extension. In previous versions, if a Windows account with administrative rights connected to the SSH Server, the server would always elevate the session if possible. Otherwise, the user would not be able to get an elevated session because there was no way to convey the user's preference. With the elevation extension, the user can request a non-administrative security context by requesting no elevation (elevation is still applied by default). In command line clients including stermc, sexec and sftpc, this is controlled using the switch -elevation=n
- Bitvise SSH Server and Client now support the no-flow-control extension. This disables SSH flow control for clients that only support opening one channel. No flow control is now preferred by sftpc, stermc, sexec and spksc, which only need to open one channel in the SSH session. The graphical SSH Client does not support no-flow-control because it requires multiple channels
- Bitvise SSH Server and Client now support the ext-auth-info extension. This allows the server to respond to user authentication failures with more detailed information in situations where this is safe. For example, if the client attempts to perform a password change but the new password does not meet complexity requirements, the server can communicate this instead of making the user guess
- Bitvise SSH Server and Client now support the delay-compression extension. Delayed compression reduces attack surface for unauthenticated clients by delaying availability of compression until after a user is authenticated. The delay-compression extension is an improvement over previously supported alternatives: the [email protected] method contains a by-design race condition, while the approach of invoking a second key exchange doubles the overhead of establishing an SSH session

Terminal:
- Settings for the graphical xterm/vt100 terminal console window (totermw) are now stored in the SSH Client profile instead of in the Windows registry

SFTP:
- In the graphical SFTP interface, the Open and Edit commands will now be much more responsive if a transfer is already in progress. The in-progress transfer will be paused and the file associated with the Open or Edit command will be transferred as a priority
- Both the graphical SFTP interface and sftpc can now work with local paths longer than 259 characters, as well as unsafe paths not permitted by Windows in some contexts (e.g. "C:Com1file")
- A new file transfer mode, TextLf, is now supported. This works the same as AutoLf, but forces newline conversions without relying on file type detection

Tunneling:
- The SSH Client now displays the country (if available) of remote IP addresses. The SSH Client uses the MaxMind GeoLite2 Country database (under license). The country database comes with the SSH Client installation and is not automatically updated, other than by updating the SSH Client itself.

Command line clients:
- It is now easier to connect to SSH servers that accept connections on non-default ports. If no port is specified on the command line, but the SSH Client knows a host key for the destination server, the SSH Client will automatically connect to the port associated with the server in the host key database. If there are multiple port associations, however, the port still needs to be specified, unless one of them is 22.
- It is now easier to enable and disable individual algorithms with our command-line clients. Previously, to use non-default algorithms, either a -profile needed to be used, or a complete algorithm list had to be supplied using -hkey, -kex, -encr or -mac. It is now still possible to pass a whole list using the same parameters, or using their new aliases -hkeyAlgs, -kexAlgs, -encrAlgs or -macAlgs. In addition, it is possible to modify the default algorithm lists using -hkeyMod, -kexMod, -encrMod or -macMod. When using the "Mod" versions, provide a comma-separated list of algorithm names with optional prefixes. Names prefixed with "+" are added to the front of the list; names without a prefix are appended to the end; and names prefixed with "!" are removed. Example: -encrMod=+aes256-gcm,!3des-ctr

Utilities:
- The log utility now supports filesystem paths in Unicode


Bitvise SSH Client 7.46
- After the SSH session has been terminated by receiving EOF or sending SSH_MSG_DISCONNECT, FlowSsh will now discard any further outgoing SSH packets. This helps avoid a stall in processing and further improves the odds that all previously received data will be processed.
- File transfer: Fixed an issue where, if the connection was lost during a download while synchronization was being performed, the local file size would be reset to zero.
- stermc: Improved handling of default colors configured in -profile or using the -colors parameter when using non-bvterm terminals such as xterm or vt100. The screen is now cleared using the configured colors.


Bitvise SSH Client 7.45
- Bitvise SSH Server, SSH Client, and FlowSsh previously did not implement strict size limits or sanitization of content before displaying or logging strings received from a remote party. Much stricter size limits and sanitization are now implemented
- Bitvise SSH Server, SSH Client, and FlowSsh now report the size of the Diffie Hellman group actually used in DH key exchange. This is useful with key exchange methods that use DH group exchange, where there was previously no straightforward way to know what size group was used
- Importing an empty public key file would cause the SSH Client's Host key manager to hang indefinitely. Fixed.
- When loading an SSH Client profile, the SSH Client's Remote Desktop tab failed to update the Remote Desktop width and/or height if the new value was 0 (the default value). Fixed.


Bitvise SSH Client 7.44
- Cryptography: Implemented support for changes in Windows internal cryptographic structures in Windows Insider Preview Build 17704. This build was released to Windows Insiders in the Fast ring on June 27, 2018
- Users who need to use earlier versions of our software on new Windows builds that change internal structures can work around compatibility issues by using the following key exchange algorithms: Curve25519, ECDH over nistp256k1. These key exchange methods do not rely on Windows cryptography; however, our software does not provide them if FIPS mode is enabled in Windows. Other key exchange methods require upgrading our software to a version that supports the new Windows build


Bitvise SSH Client 7.43
File transfer:
- Fixed issues in past Bitvise software versions that resulted in incorrect file times when using subsecond times with SFTP protocol versions 4 and 6. This would result in incorrect last modified times after a file transfer which affected, on average, about one in several hundred files. Affected files would receive a last modified timestamp incorrect by up to 7+ minutes

Authentication:
- Fixed issues in password change dialog behavior if the original password was modified

Installation:
- Updated installer and uninstaller manifests to reduce the likelihood that Windows will incorrectly run the Program Compatibility Assistant during or after installation. This mainly affects older Windows versions such as Windows 7


Bitvise SSH Client 7.42
- The End User License Agreement has been updated to try to bring it closer to the requirements of states and their contractors. Terms are otherwise unchanged. Situations in which licenses can be transferred are now laid out so that no permission will be needed in most cases
- The SSH Client now includes a new build of the SSH Server Remote Control Panel (WRC) for use with SSH Server versions 7.21 and above. The new build incorporates improvements to the SSH Server Control Panel since version 7.26
- The SSH Client continues to include older versions of the Remote Control Panel for use with older SSH Server versions. Those remain unchanged
- The graphical SSH Client will no longer mark a profile as changed when a password is changed, but the password is not configured to be saved in the profile


Bitvise SSH Client 7.41
- This is not a new feature release, but a successor to 7.39 with continued maintenance updates. (We skip over versions containing zeros to avoid ambiguities. For example, 7.04 and 7.40 might both be referred to as "7.4")
- This version continues an upgrade amnesty. Any Bitvise SSH Client activation code that could activate a previous 7.xx version will also activate this version

SSH:
- Fixed an issue in zlib compression provided by the Crypto++ library. There existed a race condition which could cause data to be decompressed incorrectly in specific circumstances. (The circumstances required for this to happen do not appear to exist in the graphical Bitvise SSH Client or its command line clients)
- Fixed a denial of service attack vector. This remains to be described in more detail

File transfer:
- When performing unattended file transfers, the command line client sftpc would previously send a fire-and-forget SSH_FXP_CLOSE message followed by immediately closing the SFTP channel and the SSH session. Depending on circumstances such as network latency, Bitvise SSH Server versions up to and including 7.39 could fail to process the SSH_FXP_CLOSE request and incorrectly log that the final transfer may not have completed as intended. This has been fixed in the SSH Server with version 7.41. But also, sftpc will no longer send a fire-and-forget SSH_FXP_CLOSE before exiting
- In the SFTP interface of the graphical SSH Client, in the Move to... dialog, removed a limit that incorrectly prevented entering more than a fixed number of characters. This prevented use of the Move to feature with long paths and file names


Bitvise SSH Client 7.39
- SFTP: In past 7.xx versions, Bitvise SSH Client and FlowSsh would perform a Resume check regardless of the type of server if Overwrite was enabled for upload. We suspect this could cause creation of an empty file with the same name on servers that support creation of multiple files with the same name.
- The Resume check will no longer be performed when connected to a server that does not support SFTP v6 check-file and check-file-blocks extensions. With a server that supports these extensions, the Resume check will continue to be performed for Overwrite, since in this case Resume and Overwrite are the same operation.


Bitvise SSH Client 7.36

Development, licensing, and US export control:
- This is the first version of Bitvise SSH Server, SSH Client, and FlowSsh published from the United States.
- All assets, operations, relationships, and agreements related to Bitvise software development and licensing; including license agreements for use of Bitvise software by users; have been transferred from Bitvise Limited incorporated in Gibraltar, to Bitvise Limited now incorporated in Texas.
- Final builds are now performed in Texas. Our software development continues in Slovenia, Germany, and Hungary, and may include developers elsewhere in the future.
- This move is an administrative change. Our development, ownership, pricing, support, terms and policies and relationship to customers generally remain the same.
- For the purpose of export from the United States, our SSH Server, SSH Client and FlowSsh are self-classified as Mass-Market products using the ECCN 5D992, with the encryption authorization type identifier MMKT. These denote eligibility under License Exception ENC § 740.17(b)(1) of the Export Administration Regulations (EAR).
- Bitvise SSH Server, SSH Client, and FlowSsh now come with new license agreements. Users must review the new EULAs, even though the terms remain substantially the same. We apologize for this inconvenience, and have attempted to draft the agreements in a way that this might not be necessary very often.

SSH:
- Windows 10 version 1709, OS build 17046.1000, changed internal Windows structures in a way that prevented Bitvise SSH Server, SSH Client, and FlowSsh from obtaining the agreed value in DH or ECDH key exchange. This prevented successful SSH connections using this new Windows build. Fixed.
- There exist SSH implementations based on WeOnlyDo, e.g. freeSSHd, which might not send failure description and language tag fields when sending an SSH_MSG_CHANNEL_OPEN_FAILURE message. Bitvise SSH Server, SSH Client and FlowSsh will now behave as though these fields were sent as empty strings, instead of disconnecting due to an unexpected packet format.

sexec:
- Now supports the command line parameter -git, which is shorthand for the new parameters -cmdQuoted and -exitZero. This allows sexec to be more easily configured for use with Git.
- Now supports the command line parameter -cmdQuoted. This can be used when the remote command to execute is provided outside of the -cmd=... parameter, but is enclosed in single or double quotes.
- Now supports the command line parameter -exitZero. If the remote command executes and returns exit code 0, this will cause sexec to return exit code 0 as well.
- Now supports the command line parameter -p . This can be used to specify the port number instead of -port=.
- Fixed an issue which would cause sexec to interpret as its own parameter a port number passed as part of the remote command to be executed. This could cause sexec to fail, or to connect to the SSH server on an unintended port.


Bitvise SSH Client 7.35

SFTP GUI:
- Fixed an issue which would cause a crash when all files are removed from the download or upload queue.
- Fixed visual artifacts that would arise while resizing in the SFTP Download or Upload window.

SFTP compatibility:
- We have identified two compatibility issues in current and past versions of mod_sftp for ProFTPD:
- When using SFTP versions 4-6, when a client requests attributes not supported by mod_sftp, the server returns an incorrectly encoded response. With past Bitvise SSH Client and FlowSsh versions, this would result in a disconnect.
- When using SFTP version 6, mod_sftp indicates support for the check-file extensions, but disconnects if the client requests the server to hash a larger file block by block. This prevents Bitvise SSH Client and FlowSsh from performing hash-based synchronization of file content, which would normally be used instead of Resume or Overwrite if check-file extensions can be used.
- We expect these issues to be resolved in future mod_sftp versions. However, mod_sftp now comes configured by default to not send its version in the SSH version string. A client therefore cannot distinguish between a newer version that will contain these fixes, and an older version which does not.
- At this time, Bitvise SSH Client and FlowSsh will avoid the known compatibility issues by restricting SFTP protocol version to 3 when mod_sftp is detected. We would like to lift this restriction in the future if there arises a way to detect the mod_sftp version early enough.

We have identifed a compatibility issue with Van Dyke VShell:
- When using SFTP version 6, the VShell server indicates support for the check-file extensions, but does not support block-by-block hashing. This prevents Bitvise SSH Client and FlowSsh from performing hash-based synchronization of file content, which would normally be used instead of Resume or Overwrite if check-file extensions can be used.
- At this time, hash-based synchronization will be avoided when connecting to VShell, and Resume and Overwrite will be used instead.
- If VShell chooses to implement support for block-by-block hashing, Bitvise SSH Client and FlowSsh will once more use this functionality if the server advertises the extension name check-file-blocks in its supported2 packet.
- Bitvise SSH Client and FlowSsh will now recognize the check-file extension indicator in the supported2 packet as required by the SFTP extensions draft, in addition to check-file-name and check-file-handle.
- Bitvise SSH Client and FlowSsh will now recognize a check-file-blocks extension sent by servers. We suggest that future SFTP server implementations advertise support for check-file-blocks if all of the following are true:
- The server supports block-by-block file hashing
- Any reasonable block size requested by the client is supported
- A file can be hashed block-by-block starting from an arbitrary offset
- Fixed an issue which would cause available public keys to be displayed incorrectly on the Login tab, under Authentication, after a profile was closed
- Fixed issues involving the launch shortcut icons on the left side of the main SSH Client window. One issue would cause the SSH Client to crash if an icon was dragged out of the shortcut bar in the up direction

更新時間：2019-07-30
更新細節：

What's new in this version:

- Added the ability to lock tracks on the editor timeline, and to lock layers in composite shot timelines.
- Added a Strength slider to the LUT effect, to control the intensity of the LUT.
- The ribbon bar now provides information on what updates are available.
- Selecting "Delete media cache" when no project is opened no longer requires HitFilm to be relaunched.
- Added the Tone Coloring effect, which provides color controls for different tonal ranges of your project.
- Added the Remove Stock Background effect, for simple removal of black or white backgrounds.
- Upgraded Mocha HitFilm to version 6.0.3
- Added the Highpass Sharpen tool originally developed for Imerge Pro.
- Added support for multiple audio streams in video files.
- Restyled the Options dialog for improved legibility.
- The Fill Color effect now uses a default value of 100% for the Blend Amount
- The name of the "Import as Comp" option for templates is changed to "Edit".
- The Foundry's Camera Tracker has been integrated into HitFilm Pro.
- Masks can now be created and edited on the Editor timeline, without a composite shot being required.

Bug fixes:
- Loading MP3 files with multiple ID3 tags no longer causes an error.
- HitFilm now confirms that all changes to the project are saved before exiting.
- Improved audio sync for files captured by screen recording software.
- Commands which open File Explorer or Finder windows no longer open multiple windows.
- MP4 video files now decode properly on Xeon processors.
- Effects containing layer pickers with unselected layers now display correctly in opened projects.
- The Puppet effect no longer displays layer-only properties when used on the Editor timeline.
- Cineform .mov files exported on the Mac now properly display alpha channel transparency data. (Mac)
- Improved compatibility with .cube LUT files from Sony.
- Full screen mode now maximizes use of available screen space. (PC)
- Showing an exported file in the Finder no longer causes an error. (Mac)
- Rain on Glass no longer shows layer picker for the Environment Map when used on the Editor timeline.
- Publishing controls that don't contain keyframes now properly displays the Publish icon.
- Layer names remain legible regardless of what label color is selected.
- Published properties are low correctly labeled when a project is loaded.
- Property names used in templates now display correctly when the property name is edited.
- Text layers now display the correct colors when motion blur is applied.
- Mocha HitFilm now launches correctly from saved projects.
- Improved video playback performance when GPU acceleration is not in use. (PC)
- The order of default color labels is now more logically arranged.
- Footage created using NVIDIA Shadowplay containing audio at 312kbs now loads correctly.
- Right-clicking a text layer with the Slice tool selected no longer causes a crash.
- Holding CTRL when the slice tool is active now correctly allows you to create keyframes on the audio envelope.
- The distribute tools now factor in layer order when positioning multiple layers.
- Improved compatibility of .m4a files.
- Rendering a particle effect using another layer as a texture source no longer causes stability issues.
- Changed the alignment of the Close button.
- Deleting templates from the media panel which have been edited on the timeline no longer causes stability issues.
- Added shortcut key options for the Publish and Unpublish features. No default shortcut is assigned.
- The value graph now defaults to inactive, in the control panel.
- Editing the quality profiles in the options dialog no longer causes stability issues.
- Click-dragging on the editor timeline to select multiple objects or keyframes now works correctly.
- Deleting an object from the editor sequence when both the object and its keyframes are selected no longer causes stability issues.
- Adjusted the background color of the YUV Color Wheels to be consistent with other effects.
- When dragging multiple layers through the layer stack, the original order of the layers is now properly retained.
- J and L cuts on the editor timeline now work correctly.
- Improved decoding of .mp4 files, to eliminate codec corruption that would sometimes be displayed.
- Particle layers now update properly when a parent layer or dependent layer is modified.
- Sorting the Export Queue by duration now works correctly.
- MOV files using the Cineform codec now load correctly. (PC)
- Importing numerous media files no longer causes audio conforming errors.
- Pasting a comp containing an asset that was removed after the comp was copied no longer causes stability issues.
- The right-click contextual menu for templates no longer includes unavailable commands (cut/copy/duplicate).
- Maximize now updates correctly on Windows 8.1 when the taskbar is moved. (PC)
- HitFilm now correctly supports the Auto-hide Taskbar function of Windows. (PC)
- The right-click contextual menu of an object created by linking two separate media objects no longer shows the Properties option.
- When new assets are imported, they are now automatically selected in the media panel.
- Importing a template from another project using the "Import composite shot" now retains the published template status.
- Undoing the deletion of an asset from the media panel no longer causes stability issues.
- Mask controls are no longer duplicated unnecessarily.
- Pasting a template that has been deleted from the media panel no longer causes stability issues.
- Creating a Light layer when a mask tool is selected no longer switches to the Selection tool.
- Templates present on the Editor timeline which are no longer in the Media panel can no longer be pre-rendered.
- Updated the appearance of the MPEG-2 Warning icon in the media panel, for HighDPI displays.
- Click-drag to adjust values in the text panel once again works correctly.
- Masks now display the same controls on the timeline and in the control panel.
- Editing the text contained in a template no longer causes stability issues.
- The playhead and timeline now display correctly when new media is added to the end of the editor timeline.
- Improved the styling of the breadcrumb trail for the Lifetime property.
- Adding mask points after relinking media no longer causes stability issues.
- The Delete button in the media panel is now disabled if nothing is selected.
- The Properties of the HitFilmPro.exe file now display the appropriate legal trademark information. (PC)
- Deleting an asset from the media panel when a timeline instance of the asset is parented to another layer no longer causes stability issues.
- The viewer no longer displays controls for offline assets.
- Installing a template created with a newer version of the software no longer causes stability issues.
- Resizing the Options dialog now renders correctly.

更新時間：2019-07-25
更新細節：

更新時間：2019-07-25
更新細節：

What's new in this version:

- Fixed a crash when adding a new plot to a graph via the Property Manager
- Fixed a crash when writing an automatic script for crash reporting
- Fixed a crash when copy/pasting a ternary plot
- Fixed an Internal Error setting linked text axis title to "<<@"
- Fixed an Internal Error trying to load a GCT color table file
- Fixed an Internal Error when breaking an axis and updating axis break properties that required worksheet validation
- Fixed an Unexpected File Format error opening a Grapher 14 GRF file that contained a wind chart legend
- Fixed an issue where X/Y column assignments were not remembered after browsing to a new data file for a line/scatter plot
- Fixed an issue where not all classes in a classed piper plot were recognized until the plot was moved off the page
- Fixed an issue where the "Add to Graph" section in the Property Manager for a Q-Q Plot was empty
- Fixed an issue where it was not longer possible to add a fit curve to polar scatter plots and 3D step plots
- Fixed an issue where the position of axes set via automation depended on the command order
- Fixed an issue where symbol properties were not recorded when recording a script of creating a scatter plot or a line/scatter plot
- Fixed an issue where undoing changes to a class plot legend resulted in multiple legends being created
- Fixed an issue where a graph no longer displayed after opening an old file with incorrect equation formatting for a function plot
- Fixed an issue where the bounding box for a 3D fit curve was locked to the center of the page
- Fixed an issue where extra axes ticks were present off the end of the axis for a 3D step plot
- Fixed an issue where the page background did not appear when using a gradient fill if the Pattern was not changed from None
- Added the ability to remember the data sheet name in a GPJ file

更新時間：2019-07-24
更新細節：

更新時間：2019-07-19
更新細節：

What's new in this version:

- Node version upgrade
- Action triggers for node client
- Allow native location on mac
- Device status improvements

更新時間：2019-07-17
更新細節：

更新時間：2019-06-25
更新細節：

What's new in this version:

Acronis True Image 2019 23.5.1 Build 17750
- Change log not available for this version


Acronis True Image 2019 23.4.1 Build 17750
- Change log not available for this version


Acronis True Image 2019 23.4.1 Build 14690
- Change log not available for this version


Acronis True Image 2019 23.4.1 Build 14610
- Change log not available for this version


Acronis True Image 2019 23.2.1 Build 14110
- Change log not available for this version


Acronis True Image 2019 23.2.1 Build 13660

New:
- Cleaning up backup versions manually: Take even greater control over your local backups in order to better manage your disk spaceOur new backup cleanup utility allows you to free up space by manually selecting unnecessary versions of your backupsKeep what you need, wipe what you don’t.
- Acronis Survival Kit: To recover your computer in case of a failure, you need to have two crucial components—a backup of your system disk and a bootable rescue mediaAcronis Survival Kit is an external hard disk drive that contains both components so that you can have a single device that has everything that you need to recover your computerTo create an Acronis Survival Kit you can use any external hard disk drive larger than 32 GBPlease note that external flash drives are not supported.
- Active Protection for NAS devices and network shares: Acronis Active Protection, our industry-leading defense against ransomware, can now protect network shares and NAS devices.
- Enhanced scheduling flexibility: We are making scheduling easier with the new option that allows starting backups whenever an external drive is connectedConfigure a new backup plan, activate the option, and your backup will start automatically each time you attach the designated USB drive to your PC.

Improved:
- Cloud backup: Acronis’ new technology for backing up files to the cloud increases the backup speedThat means the independently proven fastest cloud backup is even better, delivering secure, off-site storage that encrypts your data to ensure your digital privacy.
- OneDrive backup technology: Acronis True Image 2019 can now back up the OneDrive files that are physically present on your PCPlease make sure that the option "Save space and download files as you use them" is disabled in the Microsoft OneDrive settings, to ensure Acronis True Image consistently backs up your files.
- In Acronis True Image 2019 WinPE media received two important improvements: The ability to add drivers to WinPE media; Acronis WinPE media detects network adapters and you can configure network settings to recover using either a Wi-Fi or Ethernet connection

更新時間：2019-05-31
更新細節：