vconn switch
Lastly, the VCONN switch is optional in many cases. VCONN is used to power passive e-marked or active cables by switching 5 V onto the ...,IN2. 4. I. VCONN input supply. Internal power switch connects IN2 to CC1 or CC2. Short to IN1 if only one supply is used. AUX. 5. I. ,VCONN internal power switch input supply for the ... OUT/ VCONN switch shutdown in ... The TPS25820 also has integrated power switches for VCONN. Refer to ... ,VCONN voltage should be at a valid stable value before software closes the VCONN switch. If VCONN support is not required in the system, then this pin can be ... ,VCONN is a 5 V 1 W power supply used to power the Integrated Circuit (IC) within an electronically marked Type-C cable. The DFP will supply the VCONN power ... , Integrated power switch for VCONN supply: – programmable current limit up to 600 mA. – overcurrent, overvoltage, and thermal protection.,電纜兩端的VCONN是不需要連通的。為電纜中電子標籤IC供電的VCONN來自電纜的一端，它在電子標籤晶片被確定存在於電纜中即被提供。 , 配置Vconn，當線纜裏有芯片的時候，一個cc傳輸信號，一個cc變成供電Vconn ... 如果DFP認到device為DP，便切換MUX/Configuration Switch， ...,剩下的，包括CC、SBU和VCONN，用于方向、线类型等检测，具体可参考后面 ... 的介绍）决定；后续也可以通过data role switch过程更改（如果支持USB PD协议 ... ,VCONN. Power Rail. Controller. CURRENT_MODE. VCONN_FAULT. CC Logic ... 针对有源电缆提供VCONN 支持. • 外部开关 ... 6.6 Switching Characteristics.
| 相關軟體 DriverPack Solution Online 資訊 | |
|---|---|
 vconn switch 相關參考資料
A primer on USB Type-C and Power Delivery applications and ...
Lastly, the VCONN switch is optional in many cases. VCONN is used to power passive e-marked or active cables by switching 5 V onto the ... https://www.ti.com TPS25810 USB Type-C DFP Controller and Power Switch ...
IN2. 4. I. VCONN input supply. Internal power switch connects IN2 to CC1 or CC2. Short to IN1 if only one supply is used. AUX. 5. I. https://www.ti.com TPS25820、TPS25821 USB Type-CTM 1.5A 源控制器和电源 ...
VCONN internal power switch input supply for the ... OUT/ VCONN switch shutdown in ... The TPS25820 also has integrated power switches for VCONN. Refer to ... http://www.ti.com TUSB422 具有供电功能的 USB Type-C™ 端口控制 ... - 德州仪器
VCONN voltage should be at a valid stable value before software closes the VCONN switch. If VCONN support is not required in the system, then this pin can be ... https://www.ti.com.cn Type-C™ CC and VCONN Signals - Developer Help
VCONN is a 5 V 1 W power supply used to power the Integrated Circuit (IC) within an electronically marked Type-C cable. The DFP will supply the VCONN power ... https://microchipdeveloper.com USB Type-C™ controller with VCONN switch - Farnell
Integrated power switch for VCONN supply: – programmable current limit up to 600 mA. – overcurrent, overvoltage, and thermal protection. http://www.farnell.com USB Type-C介面PD協定解決方案| Richtek Technology
電纜兩端的VCONN是不需要連通的。為電纜中電子標籤IC供電的VCONN來自電纜的一端，它在電子標籤晶片被確定存在於電纜中即被提供。 https://www.richtek.com USB Type-C工作原理解析- IT閱讀 - ITREAD01.COM
配置Vconn，當線纜裏有芯片的時候，一個cc傳輸信號，一個cc變成供電Vconn ... 如果DFP認到device為DP，便切換MUX/Configuration Switch， ... https://www.itread01.com USB-C(USB Type-C)规范的简单介绍和分析| 村田中文技术社区
剩下的，包括CC、SBU和VCONN，用于方向、线类型等检测，具体可参考后面 ... 的介绍）决定；后续也可以通过data role switch过程更改（如果支持USB PD协议 ... http://murata.eetrend.com 具有VCONN 的TUSB321 USB Type-C™ 配置通道逻辑和端口 ...
VCONN. Power Rail. Controller. CURRENT_MODE. VCONN_FAULT. CC Logic ... 针对有源电缆提供VCONN 支持. • 外部开关 ... 6.6 Switching Characteristics. http://www.ti.com.cn |