smartctl megaraid
The smartctl Command Line Tool of Smartmontools is primarily used to query SMART attributes of hard drives and SSDs that are connected ..., This is how I've done it before. There might be better ways. Get the PCI bus ID for the adapter from MegaCLI:,Do you have any info about a possible ATA/SCSI pass-through I/O-control implemented in the LSI MegaRAID driver for Windows? As a LSI user, you might be ... , root@pm03:~# lspci | egrep -i 'raid|adaptec' 03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)., Yes, you can use 0, or 12, or 13, or 14, or 16 for N. If your scan output isn't complete, possibly even more numbers. And you already tried with 0, ..., 指令#smartctl – http://benjr.tw/95984 是透過硬碟本身所提供的S.M.A.R.T. (Self-Monitoring ... root@ubuntu:~# smartctl -a -d megaraid,0 /dev/sdb., Therefore, smartmontools has to use vendor specific I/O controls. Support for disks ... LSI MegaRAID SAS RAID controller. Dell PERC 5/i,6/i ...,/opt/MegaRAID/MegaCli/MegaCli64 -adpgetpciinfo -a0 | grep Bus Bus ... Run smartctl --scan to print all devices attached including the device id and RAID type:
| 相關軟體 CrystalDiskInfo 資訊 | |
|---|---|
 smartctl megaraid 相關參考資料
Smartmontools with MegaRAID Controller - Thomas-Krenn-Wiki
The smartctl Command Line Tool of Smartmontools is primarily used to query SMART attributes of hard drives and SSDs that are connected ... https://www.thomas-krenn.com smart - smartctl & megaraid: how to find the right device node for ...
This is how I've done it before. There might be better ways. Get the PCI bus ID for the adapter from MegaCLI: https://serverfault.com Request adding LSI megaraid card support on windows - smartmontools
Do you have any info about a possible ATA/SCSI pass-through I/O-control implemented in the LSI MegaRAID driver for Windows? As a LSI user, you might be ... https://www.smartmontools.org #793 (SMART error (FailedReadSmartSelfTestLog ... - Smartmontools
root@pm03:~# lspci | egrep -i 'raid|adaptec' 03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05). https://www.smartmontools.org linux - smartctl megaraid,N ( how to find the right value for N ...
Yes, you can use 0, or 12, or 13, or 14, or 16 for N. If your scan output isn't complete, possibly even more numbers. And you already tried with 0, ... https://unix.stackexchange.com Linux command – smartctl (RAID controllers) - Benjr.tw
指令#smartctl – http://benjr.tw/95984 是透過硬碟本身所提供的S.M.A.R.T. (Self-Monitoring ... root@ubuntu:~# smartctl -a -d megaraid,0 /dev/sdb. http://benjr.tw Supported_RAID-Controllers – smartmontools
Therefore, smartmontools has to use vendor specific I/O controls. Support for disks ... LSI MegaRAID SAS RAID controller. Dell PERC 5/i,6/i ... https://www.smartmontools.org smart - smartctl & megaraid: how to find the right device ... - Server Fault
/opt/MegaRAID/MegaCli/MegaCli64 -adpgetpciinfo -a0 | grep Bus Bus ... Run smartctl --scan to print all devices attached including the device id and RAID type: https://serverfault.com |