extreme switch ntp

相關問題 & 資訊整理

extreme switch ntp

I am running EXOS 15.7.1 on an X670-G2 and im trying to configure NTP. the ntp server is a few hops away and the connection from the switch ...,Extreme 基本設定1.查配置#show accounts ... #show switch. #show session ... 若為封閉環境,且無NTP Server,可下達以下指令直接設定時間。 #configure time ... ,Please note that NTP feature support was added to EXOS in 12.7. From EXOS 12.7 until 15.4 the NTP XMOD was required in order to configure and use the ... , NTP wasn't available until EXOS 12.7 and required a separate XMOD until EXOS 15.5. Since your switch is on 12.6, NTP isn't available.,How to configure EXOS switches to be NTP servers ... To configure an NTP broadcast server over a VLAN where NTP broadcast service is provided, use the ... , How to configure the Simple Network Time Protocol to synchronize the switch time with an external NTP Server.,Using intermediate routers as NTP server source instead of WAN routers causes the NTP clock to drift and eventually have a too high dispersion. This makes the ... ,Extreme Summit Switch預設帳號Admin、User,預設帳號並沒有設置密碼; .... 若為封閉環境,且無NTP Server,可下達以下指令直接設定時間。 ,NTP time on an Extreme switch is not in sync with a Cisco device which is the NTP server. NTP association between both devices is present as seen from the ... , The Switch IP is using vr vr-default and i can ping the Server who offers the NTP. I've disabled and enabled the NTP. But the shown time is still ...

相關軟體 GNS3 資訊

GNS3
GNS3 是一種模擬複雜網絡的軟件,盡可能接近真實網絡的執行方式,所有這些都沒有專用的網絡硬件,如路由器和交換機。它還可以用來實驗功能或檢查需要在實際設備上稍後部署的配置.在無風險的虛擬環境中構建,設計和測試您的網絡,並訪問最大的網絡社區來提供幫助。無論您正在學習第一次網絡考試還是建立全州電信網絡,GNS3 都可以輕鬆設計和構建任何規模的網絡,而無需硬件。而最好的部分是免費的!為什麼要使用 GNS... GNS3 軟體介紹

extreme switch ntp 相關參考資料
Configure NTP source ip | Extreme Networks Support Community

I am running EXOS 15.7.1 on an X670-G2 and im trying to configure NTP. the ntp server is a few hops away and the connection from the switch ...

https://community.extremenetwo

Extreme 基本設定@ 好宅不好宅:: 痞客邦::

Extreme 基本設定1.查配置#show accounts ... #show switch. #show session ... 若為封閉環境,且無NTP Server,可下達以下指令直接設定時間。 #configure time ...

http://bbbtkimo.pixnet.net

How to Configure NTP on EXOS switch? - GTAC Knowledge - Extreme ...

Please note that NTP feature support was added to EXOS in 12.7. From EXOS 12.7 until 15.4 the NTP XMOD was required in order to configure and use the ...

https://gtacknowledge.extremen

How to disable ntp in ExtremeXOS. | Extreme Networks Support ...

NTP wasn't available until EXOS 12.7 and required a separate XMOD until EXOS 15.5. Since your switch is on 12.6, NTP isn't available.

https://community.extremenetwo

How To: Configuring EXOS switches to be NTP servers

How to configure EXOS switches to be NTP servers ... To configure an NTP broadcast server over a VLAN where NTP broadcast service is provided, use the ...

https://gtacknowledge.extremen

How To: How to configure Simple Network Time Protocol (SNTP) to ...

How to configure the Simple Network Time Protocol to synchronize the switch time with an external NTP Server.

https://gtacknowledge.extremen

ntp server stops working - GTAC Knowledge - Extreme Networks

Using intermediate routers as NTP server source instead of WAN routers causes the NTP clock to drift and eventually have a too high dispersion. This makes the ...

https://gtacknowledge.extremen

Shunze 學園- 《分享》Extreme Summit Switch的基本設定

Extreme Summit Switch預設帳號Admin、User,預設帳號並沒有設置密碼; .... 若為封閉環境,且無NTP Server,可下達以下指令直接設定時間。

http://www.shunze.info

Solution: NTP time on Extreme switch does not get synchronized when ...

NTP time on an Extreme switch is not in sync with a Cisco device which is the NTP server. NTP association between both devices is present as seen from the ...

https://gtacknowledge.extremen

Summit X-Series, Problem with curent time | Extreme Networks ...

The Switch IP is using vr vr-default and i can ping the Server who offers the NTP. I've disabled and enabled the NTP. But the shown time is still ...

https://community.extremenetwo