dynamic vcore
AMD Ryzen 5 1600 @ x38.25 / 3825 Mhz; Dynamic Vcore (DVID) offset @ +0.078V (1.332V HWMonitor); Dynamic VCORE SOC (DVID) offset @ +0.258V (1.116V HWMonitor); DRAM Voltage (CH A/B) @ 1.380V; DRAM Memory Frequency @ x32.00 / 3200 Mhz; DRAM Memory Sub Timin,I really don't know what is Dynamic Vcore DVID and Dynamic Vcore SOC DVID, also want to know what they are doing ? ,I don't remember if I actually altered the Dynamic VCore option of if I left it on auto but, looking back over the notes I made at the time, I actually didn't record anything about it so, I would assume that I left it at its default state of auto.,I used the Dynamic Vcore(DVID) & Dynamic VCORE SOC(DVID) to bump my 1700X up to 1.4v on the CPU ... ,DVID = Gigabyte Dynamic Vcore. Vcore must be set to normal or DVID will not function. All C states and EIST etc must be enabled. The idea is to 'find' the max Vcore necessary for stablity. Then 'know' what is the normal cpu voltage supplie,Ok so I am trying to use dynamic Vcore to do my OC so that it will run at stock frequencies/voltage idle and kick up only when it needs to too. The problem I am having is in BIOS everything looks normal, I have a 4.5GHZ OC at 1.320 V stock frequency is se, I believe Gigabyte SB motherboards in BIOS label the "offset" vcore feature as dynamic vcore? I like to run offset vcore for a daily SB o.c. at 46x with a slight "+ bump" (crunching/100% load) and CPUZ shows ~ 1.3v. How much of bump t,I'm new to overclocking, and I can't figure out what these two voltage settings mean or do. If someone could explain to me what they are it would... ,回gundamdw 大大，我把PLL 調成Normal 後，把Dynamic Vcore 調成-0.06，結果一開機就悲劇了，直接藍白重開，重開後在一開始開機畫面那邊跳出警告，好像是說CPU 超頻失敗之類的，然後倍頻就自動回去33 了，後來我就把BIOS 回復原廠，然後照上面說的那些設定去設定，燒機沒問題，正常使用中。只是中間有 ... , 其实很想问个问题：Dynamic Vcore（DVID）的作用及对超频的影响,如题今天在调戏我的I3 540时候留意到这个选项一般状态下是不可调的，当选择CPU core选择normal的时候就会变成可调百度了一下貌似是动态降压？？对平时的超频有...,电脑讨论,讨论区-技术与经验的讨论,Chiphell - 分享与交流用户体验.
| 相關軟體 Intel Graphics Driver (32-bit) 資訊 | |
|---|---|
 dynamic vcore 相關參考資料
** Ryzen 5 1600 + Gigabyte AB350 Gaming 3 – Overclocking Guide ...
AMD Ryzen 5 1600 @ x38.25 / 3825 Mhz; Dynamic Vcore (DVID) offset @ +0.078V (1.332V HWMonitor); Dynamic VCORE SOC (DVID) offset @ +0.258V (1.116V HWMonitor); DRAM Voltage (CH A/B) @ 1.380V; DRAM Memo... https://www.reddit.com AM4 Gigabyte gaming 3 what is Dynamic Vcore DVID and Dynamic Vcore ...
I really don't know what is Dynamic Vcore DVID and Dynamic Vcore SOC DVID, also want to know what they are doing ? https://www.reddit.com CPU-Z Vcore, Dynamic Vcore - Official GIGABYTE Forum
I don't remember if I actually altered the Dynamic VCore option of if I left it on auto but, looking back over the notes I made at the time, I actually didn't record anything about it so, I wo... https://forum.giga-byte.co.uk Gigabyte B350M Gaming 3 no CPU voltage tuning possibility - YouTube
I used the Dynamic Vcore(DVID) & Dynamic VCORE SOC(DVID) to bump my 1700X up to 1.4v on the CPU ... https://www.youtube.com How does DVID work? - Official GIGABYTE Forum
DVID = Gigabyte Dynamic Vcore. Vcore must be set to normal or DVID will not function. All C states and EIST etc must be enabled. The idea is to 'find' the max Vcore necessary for stablity. The... https://forum.giga-byte.co.uk Trying to OC with dynamic Vcore problem. - Overclock.net - An ...
Ok so I am trying to use dynamic Vcore to do my OC so that it will run at stock frequencies/voltage idle and kick up only when it needs to too. The problem I am having is in BIOS everything looks norm... http://www.overclock.net What is dynamic v core | Overclockers Forums
I believe Gigabyte SB motherboards in BIOS label the "offset" vcore feature as dynamic vcore? I like to run offset vcore for a daily SB o.c. at 46x with a slight "+ bump" (crunchi... http://www.overclockers.com What is dynamic vcore, and vcore soc? : GAAB350 - Reddit
I'm new to overclocking, and I can't figure out what these two voltage settings mean or do. If someone could explain to me what they are it would... https://www.reddit.com [請益] i5-2500K 燒機和設定問題- 看板OverClocking - 批踢踢實業坊
回gundamdw 大大，我把PLL 調成Normal 後，把Dynamic Vcore 調成-0.06，結果一開機就悲劇了，直接藍白重開，重開後在一開始開機畫面那邊跳出警告，好像是說CPU 超頻失敗之類的，然後倍頻就自動回去33 了，後來我就把BIOS 回復原廠，然後照上面說的那些設定去設定，燒機沒問題，正常使用中。只是中間有 ... https://www.ptt.cc 其实很想问个问题：Dynamic Vcore（DVID）的作用及对超频的影响- 电脑讨论 ...
其实很想问个问题：Dynamic Vcore（DVID）的作用及对超频的影响,如题今天在调戏我的I3 540时候留意到这个选项一般状态下是不可调的，当选择CPU core选择normal的时候就会变成可调百度了一下貌似是动态降压？？对平时的超频有...,电脑讨论,讨论区-技术与经验的讨论,Chiphell - 分享与交流用户体验. https://www.chiphell.com |