cisco 3750 static route
You can cisco configure two types of routing on the router- static and dynamic to send the traffic to destination. Static route tell the network devices about exact location (hard-coded ... Cisco 3750 Comparison, 3750 V2, 3750-E, and 3750-X. ,Hi Guys, This morning I had to change the default route in my Cisco Stack so I ran the command: # ip route 0.0.0.0 0.0.0.0 x.x.x.x to my surprise this didn't replace ... ,I see that the static route in question uses aaa.bbb.214.15 as the next hop and that your default route uses aaa.bbb.4.2 as its next hop. So is it true that your 3750 ... ,And what does the core router show for those IPs in terms of routes ? Jon ... I would guess that enabling ip routing on the 3750 (it is not currently enabled), ... , "Static routing configuration is supported on the LAN base image only with the default SDM template and only on SVI interfaces. No routing ..., AFAIK once you have enabled ip routing command under the global config mode you will be able to define normal static routes. ip route x.x.x.x ..., The switch would need to be a layer-3 switch with routing enabled to allow communication between the VLANs; a layer-2 switch cannot route ...,A routing protocol is not run between the stack of Catalyst 3750s and the Internet gateway router. Instead, a static default route is configured on the 3750. , Catalyst switch models 3560, 3750, Catalyst 4500/4000 Series with Sup .... per-user static route, o - ODR, P - periodic downloaded static route ..., 百利工頭Cisco 3750G 設定VLAN 及L3 Routing (感謝蔡先生指導) 進console ... ia - IS-IS inter area, * - candidate default, U - per-user static route.
| 相關軟體 UltraVNC 資訊 | |
|---|---|
 cisco 3750 static route 相關參考資料
How to configure static routes on Cisco routers? - Best Wireless ...
You can cisco configure two types of routing on the router- static and dynamic to send the traffic to destination. Static route tell the network devices about exact location (hard-coded ... Cisco 3750... http://router.over-blog.com Cisco 3750 Stack and default static route (ip route 0.0.0.0)
Hi Guys, This morning I had to change the default route in my Cisco Stack so I ran the command: # ip route 0.0.0.0 0.0.0.0 x.x.x.x to my surprise this didn't replace ... https://www.experts-exchange.c Solved: 3750 static route won't go - Cisco Community
I see that the static route in question uses aaa.bbb.214.15 as the next hop and that your default route uses aaa.bbb.4.2 as its next hop. So is it true that your 3750 ... https://community.cisco.com 3750 Switches with static routes in rou... - Cisco Community
And what does the core router show for those IPs in terms of routes ? Jon ... I would guess that enabling ip routing on the 3750 (it is not currently enabled), ... https://community.cisco.com Solved: 3750X static routing when running LAN b... - Cisco Community
"Static routing configuration is supported on the LAN base image only with the default SDM template and only on SVI interfaces. No routing ... https://community.cisco.com how to add route to a cisco switch 3560 - Cisco Community
AFAIK once you have enabled ip routing command under the global config mode you will be able to define normal static routes. ip route x.x.x.x ... https://community.cisco.com routing - Cisco 3750 configuration for static routes per VLAN ...
The switch would need to be a layer-3 switch with routing enabled to allow communication between the VLANs; a layer-2 switch cannot route ... https://networkengineering.sta Configuring Inter-VLAN Routing with Catalyst 3750 Series Switches ...
A routing protocol is not run between the stack of Catalyst 3750s and the Internet gateway router. Instead, a static default route is configured on the 3750. https://www.cisco.com Configure InterVLAN Routing on Layer 3 Switches - Cisco
Catalyst switch models 3560, 3750, Catalyst 4500/4000 Series with Sup .... per-user static route, o - ODR, P - periodic downloaded static route ... https://www.cisco.com Cisco 3750G 設定VLAN 及L3 Routing (感謝蔡先生指導) - 其他設備- 百 ...
百利工頭Cisco 3750G 設定VLAN 及L3 Routing (感謝蔡先生指導) 進console ... ia - IS-IS inter area, * - candidate default, U - per-user static route. http://bb.pc104.tw |