Smartctl aacraid
This patch is to add aacraid device driver support to smartctl. eg. smartctl -d aacraid,lun,ID /dev/sdx. where lun and ID for disks can be found either from. , (devices supported by aacraid driver), -d aacraid,H,L,ID /dev/sdX ... For older controllers, smartctl and smartd provide limited SMART support ..., Got it now. It a little facepalm moment for me, but perhaps I can help anybody with this: smartctl -a -d "aacraid,0,0,1" /dev/sda., 指令#smartctl – http://benjr.tw/95984 是透過硬碟本身所提供 ... RAID controller ,Dell PERC 5/i,6/i controller; aacraid,H,L,ID – Adaptec SAS RAID ..., Learn how to use the smartctl command on Linux to check status of individual disks. ... 81:00.0 RAID bus controller: Adaptec AAC-RAID (rev 09) ...,smartctl -a -d aacraid,1,0,4 /dev/sdb. On Linux, the following entry in /proc/devices must exist: aac. Character device nodes /dev/aacH (H=Host number) are ... ,Use '-d scsi+aacraid,H,L,ID' to disable it. On Linux, the following entry in /proc/devices must exist: aac. Character device nodes /dev/aacH (H=Host number) ... ,This prevents smartctl from issuing ATA commands to a SCSI device. nvme[,NSID] ... Use syntax such as: smartctl -a -d aacraid,0,0,2 /dev/sda smartctl -a -d ... , The RAID controller (Adaptec AAC-RAID) presents a virtual disk to the OS using an array of physical disks. With this particular controller you ..., Test will complete after Sat Dec 18 17:10:35 2010 Use smartctl -X to ... Adaptec SAS RAID controller(devices supported by aacraid driver).
| 相關軟體 CrystalDiskInfo 資訊 | |
|---|---|
 Smartctl aacraid 相關參考資料
328 (Adding aacraid device support to smartctl) - Smartmontools
This patch is to add aacraid device driver support to smartctl. eg. smartctl -d aacraid,lun,ID /dev/sdx. where lun and ID for disks can be found either from. https://www.smartmontools.org Checking disks behind RAID controllers - Smartmontools
(devices supported by aacraid driver), -d aacraid,H,L,ID /dev/sdX ... For older controllers, smartctl and smartd provide limited SMART support ... https://www.smartmontools.org Getting SMART information from Disks behind Adaptec 51645 ...
Got it now. It a little facepalm moment for me, but perhaps I can help anybody with this: smartctl -a -d "aacraid,0,0,1" /dev/sda. https://serverfault.com Linux command – smartctl (RAID controllers) - Benjr.tw
指令#smartctl – http://benjr.tw/95984 是透過硬碟本身所提供 ... RAID controller ,Dell PERC 5/i,6/i controller; aacraid,H,L,ID – Adaptec SAS RAID ... http://benjr.tw Linux Use smartctl To Check Disk Behind Adaptec RAID ...
Learn how to use the smartctl command on Linux to check status of individual disks. ... 81:00.0 RAID bus controller: Adaptec AAC-RAID (rev 09) ... https://www.cyberciti.biz smartctl(8) — smartmontools — Debian stretch — Debian ...
smartctl -a -d aacraid,1,0,4 /dev/sdb. On Linux, the following entry in /proc/devices must exist: aac. Character device nodes /dev/aacH (H=Host number) are ... https://manpages.debian.org smartctl(8) — smartmontools — Debian unstable — Debian ...
Use '-d scsi+aacraid,H,L,ID' to disable it. On Linux, the following entry in /proc/devices must exist: aac. Character device nodes /dev/aacH (H=Host number) ... https://manpages.debian.org Ubuntu Manpage: smartctl - Control and Monitor Utility for ...
This prevents smartctl from issuing ATA commands to a SCSI device. nvme[,NSID] ... Use syntax such as: smartctl -a -d aacraid,0,0,2 /dev/sda smartctl -a -d ... http://manpages.ubuntu.com Using smartctl to monitor the Adaptec 2405 RAID controller disks
The RAID controller (Adaptec AAC-RAID) presents a virtual disk to the OS using an array of physical disks. With this particular controller you ... https://www.abort-retry-fail.c 硬碟的健康檢查(SMART) - smartmontools | 夢想家
Test will complete after Sat Dec 18 17:10:35 2010 Use smartctl -X to ... Adaptec SAS RAID controller(devices supported by aacraid driver). https://datahunter.org |