Smartctl USB
... www.smartmontools.org /dev/sdb: Unknown USB bridge [0x26bd:0x9917 (0x100)] Please specify device type with the -d option. Use smartctl -h to get a usage ... ,/dev/sde: Unknown USB bridge [0x059f:0x1029 (0x100)] Smartctl: please specify device type with the -d option. Use smartctl -h to get a usage summary. ,smartctl 答案： /dev/sde: Unknown USB bridge [0x14cd:0x6600 (0x201)] Smartctl: please specify device type with the -d option. ,There is a vendor independent SAT (SCSI/ATA transfer) standard, but AFAIK this is not widely supported on (cheaper) bridges. There are several vendor specific ... ,The following tables list USB devices that have been successfully or unsuccessfully (below) tested with smartmontools. The entries are sorted by USB ID. , Okay, in my case the udisksd daemon througs errors udisksd[657]: Error performing initial housekeeping for drive /org/freedesktop ..., To access SMART functionality, smartmontools must be able to send native ATA or NVMe commands directly to the drive. For USB devices, at ...,Merged with smartctl on external hdd inside ide-to-usb enclosure. ... I'd like to run smartctl tests on a hard disk, but I'm not sure which option I should use to ... , sudo apt-get install -y smartmontools. 如果不是在RAID 底下管理的硬碟，一般可以直接透過指定磁碟代號的方式如/dev/hda 來讀取資訊或進行 ...
| 相關軟體 CrystalDiskInfo 資訊 | |
|---|---|
 Smartctl USB 相關參考資料
#1054 (Unknown USB bridge 0x26bd:0x9917) – smartmontools
... www.smartmontools.org /dev/sdb: Unknown USB bridge [0x26bd:0x9917 (0x100)] Please specify device type with the -d option. Use smartctl -h to get a usage ... https://www.smartmontools.org #153 (missing USB bridge for LaCie Drive) – smartmontools
/dev/sde: Unknown USB bridge [0x059f:0x1029 (0x100)] Smartctl: please specify device type with the -d option. Use smartctl -h to get a usage summary. https://www.smartmontools.org ide-to-usb机箱内外部硬盘上的smartctl - QA Stack
smartctl 答案： /dev/sde: Unknown USB bridge [0x14cd:0x6600 (0x201)] Smartctl: please specify device type with the -d option. https://qastack.cn smartctl on external hdd inside ide-to-usb enclosure - Unix ...
There is a vendor independent SAT (SCSI/ATA transfer) standard, but AFAIK this is not widely supported on (cheaper) bridges. There are several vendor specific ... https://unix.stackexchange.com Smartmontools USB Device Support
The following tables list USB devices that have been successfully or unsuccessfully (below) tested with smartmontools. The entries are sorted by USB ID. https://www.smartmontools.org usb drive - unable to access usb harddrive with smartctl - Ask ...
Okay, in my case the udisksd daemon througs errors udisksd[657]: Error performing initial housekeeping for drive /org/freedesktop ... https://askubuntu.com USB – smartmontools
To access SMART functionality, smartmontools must be able to send native ATA or NVMe commands directly to the drive. For USB devices, at ... https://www.smartmontools.org Which 'smartctl -d' option should I use on this hard-disk: 'scsi ...
Merged with smartctl on external hdd inside ide-to-usb enclosure. ... I'd like to run smartctl tests on a hard disk, but I'm not sure which option I should use to ... https://unix.stackexchange.com 透過Smartmontools smartctl 讀取硬碟S.M.A.R.T. 資訊- Peter ...
sudo apt-get install -y smartmontools. 如果不是在RAID 底下管理的硬碟，一般可以直接透過指定磁碟代號的方式如/dev/hda 來讀取資訊或進行 ... https://www.peterdavehello.org |