SEVONPEND
In addition, if the SEVONPEND bit in the SCR is set to 1, any new pending interrupt triggers an event and wakes up the processor, even if the interrupt is ... , 另外，如果SCR寄存器的SEVONPEND位置为1，任何一个新的挂起的中断都能触发一个事件并唤醒处理器，哪怕该中断是禁止的或没有足够的优先 ...,In addition, if the SEVONPEND bit in the SCR is set to 1, any new pending interrupt triggers an event and wakes up the processor, even if the interrupt is ... , 对于通过WFE方式进入低功耗的状况可以由事件唤醒，当SCR寄存器的SEVONPEND为1时，任何时候发生了任何中断都会把处理器唤醒；当SCR ...,Applications must not modify the SEVONPEND flag in the SCR register when running in priority level 1 for s130 and priority levels 2 or 3 for s132. Two questions. ,If my way of thinking is not wrong, I have to set SEVONPEND flag to wake up cpu from sd_app_evt_wait on pended event. How to set this flag? I cannot find any ... ,... N N WFE Behavior IRQ with BASEPRI, SEVONPEND = 0 IRQ priority > BASEPRI Y Y IRQ priority =< BASEPRI N N IRQ with BASEPRI, SEVONPEND = 1 IRQ ... , 在使用WFE 或WFI 时核的运作可能有所不同，具体取决于唤醒中断的优先级别是大于还是小于当前的核级别以及SEVONPEND 和PRIMASK 设置。, #endif. SCB->SCR |= SCB_SCR_SEVONPEND_Msk; }. I want to know what SEVONPEND means, but can't find it in nRF52832's datasheet.
| 相關軟體 CorelDRAW Graphics Suite 資訊 | |
|---|---|
 SEVONPEND 相關參考資料
Cortex-M0 Devices Generic User Guide: 2.5.2. Wakeup from ...
In addition, if the SEVONPEND bit in the SCR is set to 1, any new pending interrupt triggers an event and wakes up the processor, even if the interrupt is ... http://infocenter.arm.com Cortex-M0处理器的故障处理和功耗管理| MCU加油站
另外，如果SCR寄存器的SEVONPEND位置为1，任何一个新的挂起的中断都能触发一个事件并唤醒处理器，哪怕该中断是禁止的或没有足够的优先 ... http://mcu.eetrend.com Cortex-M3 Devices Generic User Guide: 2.5.2. Wakeup from ...
In addition, if the SEVONPEND bit in the SCR is set to 1, any new pending interrupt triggers an event and wakes up the processor, even if the interrupt is ... http://infocenter.arm.com Cortex-M3的低功耗模式- 知乎
对于通过WFE方式进入低功耗的状况可以由事件唤醒，当SCR寄存器的SEVONPEND为1时，任何时候发生了任何中断都会把处理器唤醒；当SCR ... https://zhuanlan.zhihu.com SEVONPEND flag and high interrupt priorities - Nordic DevZone
Applications must not modify the SEVONPEND flag in the SCR register when running in priority level 1 for s130 and priority levels 2 or 3 for s132. Two questions. https://devzone.nordicsemi.com SEVONPEND setting - how to? - Nordic DevZone
If my way of thinking is not wrong, I have to set SEVONPEND flag to wake up cpu from sd_app_evt_wait on pended event. How to set this flag? I cannot find any ... https://devzone.nordicsemi.com The Definitive Guide to the ARM Cortex-M3
... N N WFE Behavior IRQ with BASEPRI, SEVONPEND = 0 IRQ priority > BASEPRI Y Y IRQ priority =< BASEPRI N N IRQ with BASEPRI, SEVONPEND = 1 IRQ ... https://books.google.com.tw WFI 和WFE 指令 - Silicon Labs
在使用WFE 或WFI 时核的运作可能有所不同，具体取决于唤醒中断的优先级别是大于还是小于当前的核级别以及SEVONPEND 和PRIMASK 设置。 https://www.silabs.com Why I can't find any description of SEVONPEND and System ...
#endif. SCB->SCR |= SCB_SCR_SEVONPEND_Msk; }. I want to know what SEVONPEND means, but can't find it in nRF52832's datasheet. https://devzone.nordicsemi.com |