Zoom Player MAX 歷史版本列表
更新時間：2020-09-07
更新細節：
What's new in this version:
Fixed:
- Fixed a crash when duplicating a built-in profile
- Having an equals symbol in your start or end g-code would cause part of that g-code to disappear and could cause a crash when loading a model. This is fixed now
- The MacOS build is now notarized by Apple, to prevent a security warning from popping up when starting Cura for the first time
- Corrected the orientation of the build plate mesh for Tevo Tarantula Pro
更新時間：2020-08-25
更新細節：
What's new in this version:
Bug-fixes:
- Fixed issues with support no longer generated on some parts of the model. Support Stair Steps has caused some support to be missing where it touches the build plate or where it's resting on a shallow surface. It should be complete again
- Fixed multiple different issues with tree support, where branches would intersect with the model, the wouldn't keep distance when resting on the model, or when printing with Spiralize mode
- Fixed an issue where Cubic Subdivision infill didn't move along with the model
- Cubic Subdivision will now rotate according to the Infill Line Directions setting. Contributed by smartavionics
- X-ray view is now red again, instead of translucent green
- Improved wording of the "Discard/Keep Changes" dialog for clarity
- Models assigned to extruders >4 are visible again in layer view
- Fixed an issue when importing images if the "Base" setting was greater than "Height"
- Cura now outputs a command to cool down the build plate for the second object in one-at-a-time mode even if the Initial Layer Build Plate Temperature is 0
- Distance between infill and walls and between infill and skin is corrected when using Infill Layer Thickness
- Fixed a crash when Coasting Minimum Volume is set to 0
- The usable build volume will no longer be shrunk unnecessarily when not using any adhesion, but using a prime tower with a brim
- Fixed a slicing crash when combining Randomize Infill Start with an even number for Infill Line Multiplier
- Improved reduction of model resolution. The Maximum Resolution and Deviation settings should now be more accurate and no longer behave differently in one corner of the model
- Removed an unintended gap when something was resting on an ironed surface
- Fix skirt printing out of order, causing unnecessary travel moves. Contributed by smartavionics
- A fix was added by smartavionics which removes unnecessary long moves that travel towards the outer wall
- It wasn't possible to connect to a network printer if two network plugins were enabled simultaneously. Now made possible by Loociano
- Support settings are now visible when you have support disabled, but a support mesh is present in the scene. Fixed by fieldOfView
- Fix printing speed after performing a retraction when using the stretch post-processing script. Contributed by sgtnoodle
- Prevent tool panels from overlapping with scene information. Fix made by smartavionics
- The values of the machine settings would look cut-off on some Linux distributions. Now fixed by smartavionics
- Fixed settings sometimes not appearing if they belong to a checkbox setting that is enabled by default (e.g. retraction settings belonging to Enable Retraction)
- We cleaned up our “About...” dialog. It is now up to date
- Improve performance of loading profile metadata. This fix improves the start-up time of Cura
- When loading images, the translucency and linear options were swapped. Translucency should now again be tuned for lithophanes, and linear for a height map. Contributed by michalsc
- Retractions in travel move to next layer were sometimes omitted, but that's fixed now. Contributed by smartavionics
- Fix initial layer thickness when empty initial layers are removed. Contributed by smartavionics
- If Brim Replaces Support is enabled, the brim will now also replace support interface
更新時間：2020-07-14
更新細節：
What's new in this version:
Bug fixes:
- Persistent notifications in Marketplace. We fixed a frustrating bug where a package would keep issuing a badge notification to update, even after the package had been updated
- Removed Ultibot from Marketplace login screen. For professionalism, Ultibot has been asked to leave the Marketplace login screen. He's now gone from everything
- Ultimaker 2+ Z-hop. The Ultimaker 2+ included an unwanted travel move that could drag purged material into the start of a print. This is now fixed
更新時間：2020-04-29
更新細節：
What's new in this version:
Bug fixes:
- Z seam placement. Changes to the Simplify() algorithm in 4.6.0 caused Z seam placement issues, which resulted in less-than-perfect results. This has been fixed.
- Ender 3 Pro nozzles missing. A lot of issue reports came in about nozzles missing for this machine definition, so we made a fix to stop this happening.
更新時間：2020-04-21
更新細節：
What's new in this version:
New features:
- New Intent profiles. In version 4.4 we introduced Intent profiles for the Ultimaker S3 and Ultimaker S5 which allow you to start prints at the click of a button without a lot of configuration steps. Due to popular demand, version 4.6 expands the range of Engineering Intent profiles to include more of the Ultimaker material portfolio: PC, Nylon, CPE, and CPE+. These work with 0.4 print cores.
- Show active post processing scripts. fieldOfview has contributed an ease of use improvement to the post processing plugin. The number of enabled post processing scripts will now display as a badge notification over the post processing scripts icon. A tooltip gives extra information about which scripts are enabled for quick and easy inspection, so there's no need to open the post processing dialog.
- Hole Horizontal Expansion. smartavionics has contributed a new setting that applies an offset to all holes on each layer, allowing you to manually enlarge or contract holes to compensate for horizontal expansion.
- Per-model settings. The "Infill only" checkbox has been changed to a dropdown selection: “Infill mesh only” or “Cutting mesh”.
- Transparent support rendering. In preview mode with ‘Line type’ selected, support material will render with transparency so you can easily see what’s being supported.
- No stair stepping for PVA profiles. Stair stepping is intended to reduce the adhesion between support and the model, where the support rests on the model, and to reduce scarring. As PVA doesn't suffer from scarring or adhesion issues due to its water-solubility, this value has been set to 0 for PVA profiles. A known issue with the stair stepping algorithm causes support to disappear sometimes, so doing this reduces the chance of that happening when PVA is used.
- Separators in extensions menu. fieldOfview has contributed a method for plugin authors to add separators between menu items in the “Extensions” submenu. The method is backwards-compatible so changes don’t have to be made in Cura and Uranium together.
- Ultimaker account sign in prompt. Added clearer text to the sign in popup and first use flow to highlight the benefits of using an Ultimaker account with Cura.
- Updated installer. Small fixes have been made to the installer. To keep up with the times, we’ve also updated the images to display an Ultimaker S3 instead of an Ultimaker 3.
Bug fixes:
- Infill mesh ordering
- When you have three objects overlapping each other and you set two of them to "Modify settings for infill of other models", then the setting "Infill Mesh Order" determines which of the two infill meshes gets priority where they overlap. This was broken for cutting meshes, so BagelOrb contributed a fix.
- Backups storage size. We’ve put a hard limit on backup file size in this release to prevent other files being stored there
- 3MF gcode comments removed. Fixed a bug where comments were removed from Start/End G-codes when opening from a 3MF
- Print monitor preheat fields. Values in the print monitor preheat fields were broken in previous versions, they have now been fixed by fieldOfview
- Stepper motor disarming during pause at height. Some printers automatically disable their steppers after a pause (after a certain time). This script makes it possible to set that in the pause script (instead of relying on default behavior of the firmware).
- Crash if logging in on two instances at the same time. During the beta period we caught a critical bug where logging in to an Ultimaker account with two instances of Cura would crash the second instance. It crashes because while the web page is open, Cura opens a web server in the local host. The web page redirects to that web server when you've logged in, so that it knows that the log-in was successful and what the credentials are. Both instances try to create a web server on the same port, which is impossible.
- "Changes detected from your Ultimaker account" message. We fixed a bug on MacOS where duplicate "Changes detected from your Ultimaker account" popups would appear at a single time.
- Crashes when inactive. Some people reported experiencing crashes when the computer had been inactive for a long time, or when the laptop got suspended or went to sleep. This has been fixed.
- Support blocker is not blocking support. Fixed an issue where the support blocker was not blocking support.
- Sending slice message takes too long when using mesh helpers. Fixed an issue where it would take too long to trigger a slice when using the mesh helpers and support blocker.
更新時間：2020-02-26
更新細節：
What's new in this version:
Usability:
Ultimaker Marketplace sync:
- Plugins and print profiles downloaded from the Ultimaker Marketplace will now become associated with your Ultimaker account when logged in. If changes are detected in your installation after logging in, an option to sync a list of available packages will become available. You can also add packages to your installation using the web-based Ultimaker Marketplace.
Layer preview number:
- The layer slider number in preview mode is now at the top, instead of on the left, for a neater fit next to the settings panel.
Project name in window title:
- In the same way your browser shows the page title next to the name of the application, Cura now shows the name of the loaded file in the title bar.
Slicing enhancements:
Fuzzy skin outside only:
- When enabled, this option prevents fuzzy skin inside holes. This way you can still fit your prints around other things – useful for printing grips or similar applications.
Brim distance:
- This new setting contributed by smartavionics allows you to define a gap between the brim and the model for easier brim removal and reduced chance of leaving a mark on the finished piece.
'Skin Edge Support' settings:
- It’s now possible to add an extra line inside your infill that supports the edge of the skin better. Two new settings contributed by smartavionics control this feature: ‘Skin Edge Support Thickness’ and ‘Skin Edge Support Layers’. Find these under ‘Infill settings’.
Bridge over low density infill:
- smartavionics has contributed a new setting that determines if the infill density in a location is lower than the specified infill density, skin and walls above it should be treated as bridging.
Shared heater:
- A new ‘Shared heater’ checkbox has been added to the machine settings page to support printers that have one nozzle and one heater, but multiple feeders. When enabled, heating and pre-heating procedures act differently so that the nozzle doesn’t cool down for the stand-by temperature or the initial/final printing temperatures. Contributed by smartavionics.
Material mixing:
- A new post-processing script can be used to mix materials if you have a mixing nozzle. Mix materials of different colors in order to print in a different color than either of your currently loaded materials. Contributed by Hrybmo.
Infill mesh planning:
- Another contribution from smartavionics optimizes the order in which infill meshes print their parts. It now takes the previous location into account instead of always the starting location.
Automatic extruder values:
- Automatic extruder values are now added for dual extrusion when slicing via the command line.
Gamma correction for lithopanes:
- Loading an image file into Cura creates a heightmap that can be used to make lithopanes. BagelOrb has altered the method of calculating this to apply gamma correction, so that the lightness of the pane is more truthful to the original lightness.
Support for alpha channels in ImageReader:
- Added support for images with transparency, such as PNGs. When using an image with transparency, the contours of the transparent layer will be followed. Contributed by BagelOrb.
Performance improvements:
Speed up plugin loading:
- fieldOfview has contributed a code optimization to load plugins faster on start. Mileage may vary, but Cura’s startup speed should see a marked improvement.
Crash logging:
- We switched to a more robust provider for crash analytics, so we can develop a more stable product for you. We also added some extra datapoints to crash reports.
Scene re-rendering:
- A new performance enhancement that limits re-rendering of the application interface from ‘constant’ to ‘only-when-necessary’
HTTP request handling:
- Previous versions used different ways of handling HTTP requests. This version uses a unified method, for better performance
Jobnames less sensitive to being touched:
- A contribution from fieldOfview has fixed an issue where the jobname in the bottom-left of the scene is no longer made static by clicking on it. If you load a model and change to another printer, the prefix is now correctly updated.
Property checks on instance containers:
- A new speed optimization for reading setting values from profiles
New printer definitions:
- Native support has been added for the following third-party printers. Find them in the ‘Add printer’ list.
- BeamUp S - Contributed by BeamUp 3D
- Anet3D - Contributed by springtiger
- Lotmaxx - Contributed by sm3dp
- eMotionTech - KOUBeMT has contributed updates to eMotionTech materials and the Strateo3D printer
- HMS434 - Updates contributed by maukcc
- 3D Tech - Contributed by dvdsouza
- Skriware 2 - Contributed by skriDude
- Leapfrog Bolt - Contributed by VincentRiemens
- Makeblock mCreate- Contributed by pkz0313
- Voron2- Contributed by Fulg
Bug fixes:
Application not starting (Windows):
- After a lot of sleuthing, we managed to fix a major bug for this release. The application was getting stuck on trying to load "qgif.dll", which is required to load the PNG file for the splash screen. In other cases, it was caused by trying to load a DLL file from the Intel graphics driver for OpenGL. Thanks to the community for the help and feedback to solve this one. Send logs!
Round interpolated z values:
- When spiralizing, the interpolated z values are rounded to the nearest micron
S-line build plate temp limit:
- Values over 125C will turn the setting input box orange for safety reasons. It’s still possible to print above these temperatures, though.
Apple keyboard delete button:
- Fixed an issue where pressing the delete button on an Apple keyboard wouldn’t delete things
Added “all” setting visibility:
- Fixed an issue where selecting ‘all settings’ visibility in custom mode would override a custom selection of settings when switching back
Min x/y distance on sloped walls:
- Contribution from smartavionics that uses minimum x/y distance when the layer below protrudes beyond current layer (i.e. sloped walls)
Large polygon ordering:
- Another contribution from smartavionics. This one speeds up the ordering of large numbers of polygons when using the combed travel distances.
Surface mode:
- Don't combine overlapping. Fixed an issue where overlapping volumes interfered with each other when in surface mode. Contributed by BagelOrb.
Time lapse post processing script:
- Fixed a wrong extrusion move between the last x/y position and the ‘park head to take a photo’ position.
Window size:
- Fixed an issue where window sizes weren’t saved when closing Ultimaker Cura. Contributed by fieldOfview.
Prime tower duplicate brim:
- Fixed an issue where a duplicate brim was created when adhesion and a prime tower was enabled at the same time. Contributed by smartavionics.
Different printer losing settings:
- Previous versions would lose modified settings when switching to a print group with printers of different types, e.g. adding an Ultimaker 3, modifying the infill settings from the default profile, and then switching to an Ultimaker S5 would change infill settings back to the default profile value. This version has fixed it.
One-at-a-time slice overlapping models:
- Fixed an issue where one-at-a-time mode was marking models as unprintable even though they were. This occurred a lot with Creality printers, due to print head definition issues.
Huge extrusions after bridging:
- Fixed an issue where there was a huge extrusion move after bridge wall lines
Minimum support area eating into parts:
- Setting ‘Minimum Support Interface Area’ or minimum ‘Support area’ to a non-zero value larger than the area of a model’s layer would cause support material to eat into features of the model. This has been fixed by smartavionics.
CX_Freeze needs LD_LIBRARY_PATH:
- An issue caused by different Qt versions shipped with older versions of Cura would take a wrong instance which resulted in broken libraries. This has been fixed by smartavionics.
Retraction Min Travel broken:
- We recently discovered this was broken since version 4.0. Luckily it was fixed by smartavionics
Mirror + Lay Flat behaves the other way:
- Fixed some broken behavior with mirror + lay flat settings when used together
Cura splash screen loading indicator doesn’t always spin:
- During some load phases, the spinner stops spinning, which could give the impression of a crash. This has been fixed.
UI elements get obscured on small screens:
- In preview mode, the horizontal layer progress bar could be obscured by the print action panel on smaller screens. The frontend behavior has been modified to not do this.
Brim extruder does not get used by all models:
- Fixed an issue where the specified extruder for brims would not extrude for every brim when working with multiple models in print-one-at-a-time mode
Intent UI in dark theme:
- Fixed style inconsistencies when using dark mode
Pause at height pauses too late:
- Fixed an issue where the ‘Pause at height’ post processing script would ignore specified values
Material volume between wipes:
- Fixed an issue where this setting would ignore specified values
Start/End G-code comments:
- Fixed an issue where comments were stripped out of G-code in start/end G-code fields
Manage materials for some printers not updating:
- Fixed an issue where changes did not show up when creating, deleting, renaming, or duplicating print profiles for some printers
Upgrade Script for machine duplication issue:
- Added a script to clean up hidden printers that were slowing down Cura's performance in the background
ZeroConf - slow Cura:
- The listening service for network printers could sometimes cause reduced performance, even when networked printers weren’t used. This has been fixed.
Merge Tree Support Wall Line Count into Support Wall Line Count:
- The ‘Support wall line count’ setting now has influence over tree support wall lines. Fixes a bug where custom support models weren’t being printed.
Crash loading project files:
- Fixed random crashes when loading project files for custom FFF printers
Duplicated PLA different properties:
- Fixed an issue where a duplicated profile would assign values in the wrong fields
Fix concentric skin:
- Fixed an issue where large areas of concentric skin would accumulate small approximation differences and not be roughly concentric any more towards the center
更新時間：2020-02-11
更新細節：
What's new in this version:
- Live YouTube stream support using the latest version of the 3DYD YouTube source and LAV Filters.
- New YouTube channel listing strategy (not enabled by default)which you can now enable through the Media Library category editor
- The new strategy works by listing videos in a channel's "Uploads"playlist. The downside to this strategy is that some videos may not be ordered by Publish date. For this reason, 50 videos are requested instead of the usual 25 and these videos are then sorted by the plugin instead of just listing them as-is. The upsideis that you get longer descriptions for the videos.
- New Setting (Adv. Options / Playback / Audio) to control whether the Equalizer and Pre-Amp controls should process DTS/Dolby audio (and their sub-formats such as DTS-HD, Dolby Atmos, E-EAC, etc)
- By default, these formats are not processed as they are intended for decoding by an external receiver over S/PDIF or BitStreaming
- However if you decode these formats on your PC, disabling thissetting will allow the Equalizer and Pre-Amp controls to function
- New Setting "Adv. Options / System" (disabled by default) to allow theCommand & Control API to remotely control the PC's mouse cursor
- New Setting (Adv. Options / Playback / Controls) that lets you specify the number of milliseconds Zoom Player should wait after closing a streaming media before resuming operations
- New setting (Adv. Options / System / Screen Saver & Capture) that controls whether playback should be paused before trying to capture a video frame. Please note that it's possible that some video renderers may not be able to capture a frame if the media is playing.
- New setting on the media library YouTube plugin to enable listing live streams. To playback live YouTube streams you must use the IFRAME player or use D3D YouTube Source filter v2 or newer
- New setting on the media library YouTube plugin to use the maximum thumbnail resolution YouTube provides (now disabled by default)
- In previous versions getting the maximum resolution thumbnail was the default behavior, however there are rare instances where the maximum resolution and extra bandwidth are merited
- Additionally, there is a YouTube bug that lists a URL for the maximum resolution thumbnail without the file actually being available, so this change works around this issue
- The media library can now display a format icon for the new AV1, DTSX and Dolby Atmos audio/video codecs.
- The Play History fullscreen navigation interface now lists the last play time (not just the date), the last play position and the full path to the currently highlighted entry
- The Favorite media fullscreen navigation interface now shows the full path to the highlighted entry
- New "Go" button on the station editor to make search practical without access to a keyboard
- New "Close on Play" checkbox on the Advanced Playlist Control dialog to control whether the dialog remains open or closed after playing a new media from the dialog
- New Smart Play profile for the "ADTS" streaming audio wrapper format
- New Smart Play profile for the ".DSF" file format
- New Smart Play profile for the "DSD" (Direct Stream Digital) codec
- Zoom Player Command & Control API has been expanded
- . New command to open a streaming URL
- . New command to Get & Set the current playlist
- sorting order (Ascending/Descending)
- . New command to sort the playlist (by name, size, date, etc)
- Zoom Player Command & Control API has been expanded with support for remotely controlling the PC's mouse cursor. For additional security, this capability requires you to enable the new "Allow remote mouse control" setting.
- New "/SHOWOSD[Text]" command line parameter used to show a pop-up OSD on an already running instance of Zoom Player.
- + Ctrl+"V" now works in the playlist editor's search box
- + The GoTo time fullscreen navigation interface has been enhanced to work more intuitively and with less clicking required to reach the desired time
- + The Media Library category editor has been restructured to make it easier to use when working with many categories
- + Changed how information (text/icons) are aligned on the right side of fullscreen navigation interfaces so the information does not shift around when the selected line is changed
- + Tweaked the list based fullscreen navigation interfaces to squeeze out a little more horizontal space
- + The Torrents download plugin has been updated to support qBitTorrent API v2, requiring qBitTorrent v4.2 or newer, please upgrade
- + You can now drag the meta-data edit window more easily by dragging from anywhere in the windows
- + Newly created YouTube media library categories will no longer show a video icon overlay by default (as all content from YouTube is video)
- + YouTube changed their text encoding scheme which caused Zoom Player to show the encoding of certain characters instead of the actual characters
- + Trying to open a navigation interface while in audio mode simply didn't do anything, now Zoom Player will automatically switch to media mode and show the navigation interface
- + Trying to seek backward/forward on a live stream with no duration will no longer show an OSD message as if a seek was performed
- + TheMovieDB scraper plugin will now scrape movies that do not contain a poster image
- + The fullscreen navigation information interface no longer closes automatically when opening a new media file
- + When safe mode is enabled, instead of completely hiding the main navigation interface's "System" sub-menu, now only the "Exit Zoom Player" entry is hidden
- + The Next/Previous frame functions are now ignored when playing audio-only content (there was no real use for it and it caused weird behavior with some decoders)
- + Hovering with the mouse cursor over the timeline no longer pops up a "0000" position hint when playing a live stream with no duration
- + To prevent instability, if Zoom Player's options dialog is open, all API/Keyboard processing (for the main window) are now disabled
- + Using the "fnTitleToClipboard" function with no media playing will now try to get the title from the currently highlighted playlist
- entry
- + The "Close Navigator when opening a new file" setting now applies to the streaming fullscreen navigation interface. Previously it would always close the interface regardless of the setting
- + Opening a streaming URL now closes the fullscreen navigation interface
- + Extended the Command & Control API message 1870 to support passing a title along with the URL to stream
- + When playing an MP3 with ID3v2 TAGs that contain multiple images, now the first embedded image is displayed instead of the last
- + Right clicking a track in the playlist editor will now select the track less than 2 other tracks are currently selected
- Rewrote the entire system that handles the currently selected audio device. Previously, if you were to disconnect an audio device (e.g. a BlueTooth headset), Zoom Player would switch to the default audio device, but when the the audio device was reconnected, Zoom Player would continue to use the default device instead of the previously selected device
- Now Zoom Player always tries to use the previously selected device and only temporarily switches to the default device if the selected device is not currently available
- A major bug that was introduced in v13.5 prevented the Equalizer and Pre-Amp controls from functioning when decoding audio using a filter that outputs the WAVE_FORMAT_EXTENSIBLE" structure (Which LAV Audio Decoder uses for most audio formats it decodes)
- Fix for a possible freeze when opening the media library
- The default 1610 skin was showing a 1px clear line to the right of the movie poster in jukebox mode
- Streaming audio with non-English characters encoded in the stream's meta-data would sometimes display the wrong characters
- Fixed an issue where pressing next track in a playlist containing an executable file would not stop playing the previous media track after executing the playlist entry, which also caused a cosmetic glitch in the playlist editor
- Furiously Clicking the mouse's right button to open the context menu while a track was loading caused multiple context menus to appear on screen and could even lead to a crash in some cases
- Under some rare conditions, Mouse Gesture actions could trigger without the left mouse button being held down
- Unchecking "Limit 'Hot Corners' to fullscreen mode" caused issues trying to move the player windows in Audio Mode
- Pressing DEL to erase the currently playing media will no longer prompt you to delete to recycle bin if the playing media is a URL
- Stopped the two settings that control automatic switching between Audio and Media mode from working while the player is in fullscreen mode Auto Switch to Audio Mode when a Media File does not contain a Video Stream Auto Switch to Media Mode when a Media File contains a Video Stream
- Deleting the active entry in the playlist editor (orange highlight when using the default onyx skin), did not reset the active entry if that track wasn't currently playing
- Using the "fnPLEditMetaData" function (for example using the command line "/funcfnPLEditMetaData" parameter) several times would cause multiple windows to appear
- The internal screen saver no longer activates if a track is currently in the process of loading or if an error dialog is currently visible
- Using the Advanced Playlist Control to move items to the top or bottom while a media was playing messed up the playlist active item display as well as the ID3/TAG on-screen information
- When the media library displayed a movie with no poster in JukeBox mode, the poster area showed random junk
- Trying to switch to Audio or DVD modes while a media was in the process of loading triggered a crash
- Trying to close the Playlist editor while a track was in the process of loading triggered a crash
- Deleting the currently playing file did not remove the file from the current playlist
- Enabling fullscreen navigation's "Safe Mode" broke the functions screen on the "Favorites" navigation interface
- Enabling fullscreen navigation's "Safe Mode" prevented access to the stream selection navigation interface
- It's no longer possible to erase files in safe mode from within the media library mini-menu
- Enabling "Force the navigation list or thumb view display to full width" or "Force the navigation list or thumb view to maximum width" settings would break the visual integrity of the information fullscreen navigation interface (and the Main navigation interface if it was used in list mode)
- The Media Library's "Run Application" plug-in did not run applications correctly if some command line parameters were used
- Fixed a freeze when using the MPC Audio Renderer combined with the "Show all filters in Stream Selection sub-menu" setting
- Fixed an issue where certain characters used in a media library's category path could corrupt the category list or prevent the afflicted category from functioning correctly
- Under some condition, the previously played media title would appear in the timeline area and invalid entries were being added to the play history
- Erasing entries from the favorite media list did not actually save the list your drive. Unless a new entry was added (which did save the list), restarting Zoom Player would restore the erased entries
- The sub-folder selection within the media scanner fullscreen navigation interface would draw outside the defined line boundaries
- The media scanner no longer allows you to add folders to plugin based categories (which are not folder based)
- The "Refresh" button on the media library category configuration dialog was accidentally left enabled for folder based categories. Clicking it would trigger a "list index out of bounds" error
- Playing a media through the Advanced Playlist Control dialog and then trying to close the dialog before the media finished loading would cause a non-fatal crash
- Removing entries from the playlist editor did not always select the current remaining track
- Rewind, Fast Forward and Slow Motion are now disabled when playing live streams with no duration (these functions were interfering with playback)
- Enabling fullscreen navigation's "Safe Mode" broke the functions screen on the "Favorites" navigation interface
- Enabling fullscreen navigation's "Safe Mode" prevented access to the stream selection navigation interface
- The chapter selection pop-up OSD appeared in the wrong screen position
- In the playlist editor, clicking the blank area under the playlist entries would select the last entry without clearing the currently
- selected entry
- Manually editing a Zoom Player ".CHP" chapter file using an external text editor could have triggered a freeze when trying to load the associated media file
- Changing the internal screen saver's slideshow path did not take affect until the next player restart if the screen saver was previously active (changing the folder didn't clear the cache)
- Streaming audio-only YouTube with visualizations would not always enable the ZP DSP Filter, causing synchronization issues between the audio and visualization
- Pressing the next-track button with the next tracks being a series of executable files would execute all files at once instead of just the first executable and pausing
- Trying to close the Install Center during an install could have resulted in a crash
- The "Trash" icon no longer shows up at the bottom of the media library fullscreen navigation mode when Safe Mode is enabled
- Since they were causing playback issues, the Fast Play, Slow Motion, Half Speed Fast-Play, Half Speed Slow Motion and Increase/Decrease Play Rate functions are no longer accessible when playing a live stream with no duration
- Using Shift+Delete to delete the currently selected playlist entries did not work properly if one of the selected entries was the currently playing media
- When Zoom Player was minimized to the taskbar, instructing Zoom Player to switch to fullscreen mode did not work as intended
- Trying to play a URL straight from the windows clipboard will no longer try playing if the clipboard does not actually contain a URL
- Opening the previously open navigation interface did not work when the previous navigation interface was the 'Favorites'
- Going back from the favorites fullscreen navigation interface to the main interface highlighted the playlist icon instead of the favorites icon
- Using the play history fullscreen navigation with safe mode enabled would trigger a crash or cosmetic glitches when trying to access the functions page
- Assigning functions that auto-execute when a secondary screen is attached or detached did not execute under some conditions
- Some functions called from command line using the "/func" or "/exfunc" parameters could have run before Zoom Player finished loading, triggering unexpected behavior
- You can no longer try to erase the "refresh" and "more" (plus) entries in the media library
- The "Scrapers file name blacklist" label disappeared under "Adv. Options / Interface / Fullscreen Navigation / Thumb View"
- TheMovieDB scraper plugin can now display information on multiple directors of one movie instead of just the first director
- In very rare cases where a corrupt media file was played and the "Continue to the next Playlist item when an invalid file is played" setting was enabled, if the next entry in the playlist was an executable, the user interface would think the previous item was still playing, leaving the player window in a sort of in-between state that didn't show some text
- The delete icon was visible in the download manager fullscreen navigation while safe mode was enabled
- The playlist editor's right-click menu's "Add Streaming URL" feature caused a visual glitch where the highlighted playlist entry was not the one actually playing
- Pressing the Enter key on the playlist editor right after running the player would play the first track instead of the last played track
- Under some rare conditions, the play history dialog could show duplicate entries of the same media
- When playing certain live feeds, right-clicking the timeline could wrongfully show a "Seeking 0 seconds" OSD
- Hovering with the mouse cursor over the timeline will no longer show the timeline position or a preview image if the playing media has no duration (e.g. when viewing a jpeg image)
- Some UTF8 encoded ".txt" files did not display anything when viewed
- Loading ".wpl" playlists that contain URLs did not load the URL entries correctly
- Using the Advanced Playlist Control's "Move to Bottom" function caused issues if the currently playing media was moved
更新時間：2020-01-03
更新細節：
What's new in this version:
- Fixed problem where wrong material was selected by default
- Fixed a problem where custom profiles were disappearing when loading a project without a nozzle profile
更新時間：2019-01-18
更新細節：
更新時間：2018-10-11
更新細節：