Wireshark 歷史版本列表
Wireshark (32-bit)Wireshark (64-bit)
更新時間：2018-04-25
更新細節：
What's new in this version:
- HTTP Request sequences are now supported
- Wireshark now supports MaxMind DB files. Support for GeoIP and GeoLite Legacy databases has been removed
- The Windows packages are now built using Microsoft Visual Studio 2017
- The IP map feature (the “Map” button in the “Endpoints” dialog) has been removed
更新時間：2018-04-05
更新細節：
What's new in this version:
- Serato DJ Pro support for the Rane SEVENTY-TWO
- Serato DJ Pro OSA support for the Rane TWELVE
- Fixed the 'load sample to sampler' keyboard shortcuts
- Fixed bug where m4a/mp4 files in folders containing non-ascii characters would not play on windows
- Fixed activation when users have non-ascii characters in their windows username
- Fixed crash on audio play back
更新時間：2018-04-05
更新細節：
What's new in this version:
The following vulnerabilities have been fixed:
- The MP4 dissector could crash
- The ADB dissector could crash
- The IEEE 802.15.4 dissector could crash
- The NBAP dissector could crash
- The VLAN dissector could crash
- The LWAPP dissector could crash
- The TCP dissector could crash
- The CQL dissector could to into an infinite loop
- The Kerberos dissector could crash
- Multiple dissectors and other modules could leak memory. The TN3270, ISUP, LAPD, SMB2, GIOP, ASN.1 , MIME multipart, H.223, and PCP dissectors were susceptible along with Wireshark and TShark
The following bugs have been fixed:
- TRANSUM doesn’t account for DNS retries in the Request Spread
- BGP: IPv6 NLRI is received with Add-path ID, then Wireshark is not able to decode the packet correctly
- Lua script calling Ethernet dissector runs OK in 1.12.4 but crashes in later releases
- PEEKREMOTE dissector lacks 80mhz support, short preamble support and spatial streams encoding
- Statistics > UDP Multicast Streams > [Copy|Save as..] is broken
- Typo error in enumeration value of speech version identifier
- In "Unsaved packets" dialog one can NOT use keyboard to choose "Continue without Saving"
- WCCP logical error in CHECK_LENGTH_ADVANCE_OFFSET macros
- Buildbot crash output: fuzz-2018-03-19-19114.pcap
- alloca() used in wsutil/getopt_long.c without <alloca.h> inclusion
- HP-UX HP ANSI C requires -Wp,-H200000 flag to c-ompile
- Makefile.in uses non-portable "install" command
- HP-UX HP ANSI C doesn’t support assigning {} to a variable in epan/app_mem_usage.c
- PPP in SSTP, HDLC framing not parsed properly
- Using the DIAMETER dictionary causes the standard input to be closed when the dictionary is read
Updated Protocol Support:
- 6LoWPAN, ADB, BGP, CQL, DNS, Ethernet, GIOP, GSM BSSMAP, H.223, IEEE 802.11, IEEE 802.11 Radiotap, IEEE 802.15.4, ISUP, Kerberos, LAPD, LWAPP, MIME multipart, MP4, NBAP, NORDIC_BLE, PCP, PEEKREMOTE, S1AP, SMB2, SSTP, T.30, TCP, TN3270, TRANSUM, VLAN, WCCP, and WSP
更新時間：2018-03-06
更新細節：
What's new in this version:
- Added support for the Pioneer DDJ-SB3
- Stop time functions added for the Allen & Heath 43C, DB2, DB4 and Akai AMX
- Tracks instant doubled on motorised platter controllers no longer ignore platter movements
- Keylock and pitch indicator icons are now always present on NS6II displays
- Added drivers for the Pioneer DDJ-SB and DDJ-SB2 in Lite and Pro
更新時間：2018-02-27
更新細節：
What's new in this version:
New Features:
- Added 64-bit support for Mac and Windows
- Updated look with new colours and scalable interface
- Added Practice Mode - test your mix without hardware connected
- Added 'Hi-Res Screen Display' option - Display in high resolution on Retina, 4K and HD monitors
- Added new 'Help' menu including Support Knowledge Base search
- Added 'Performance Pad Cue Layout' option
- Added headphone PFL 'Auto Cue' option (for supported controllers only)
Other Changes:
- Added play/pause keyboard shortcuts for Practice Mode - [Space] for left deck, [Enter] for right deck
- Added support for 'iTunes Library.xml' - If no iTunes Music Library.xml is found it will look for a iTunes Library.xml instead
- Changed audio decoding from video files (previously Quicktime) to the native OS decoder
- Added Mix + Mic + TR recording options for the Roland DJ-202
- Added 'Clean Echo Out' for Wolf Pack FX pack
- Set Temp Cue logic updated
- Fixed Favourite FX list not saving between sessions
- Fixed Ctrl+Z not working correctly in Offline player
- Fixed 'Error Communicating with device' message showing when DDJ SR2 is connected
- Fixed Windows DPI scaling restricting application from opening due to minimum screen resolution
- Fixed Analysis Settings popup not allowing tooltip to be open at the same time
- Fixed an issue where the Roland DJ-808 could not connect to Serato DJ on macOS High Sierra
- Fixed a potential hang when connecting Rane SL4 with no drivers installed
- Fixed 'Error Communicating with device' error message showing when connecting Pioneer DJ DDJ-SR2
- Fixed Roland TR-S not correctly aligning with the beatgrid
- Fixed Temp Cue not drawing at correct position when the beatgrid is at a negative value
- Fixed Temp Cue remaining after track is ejected
- Fixed Temp cue jumping to start of active loop
- Fixed cursor flickering while dragging from Deck/Sample slot (MacOS)
- Fixed Play From Start not being respected when Sticker Lock is enabled
- Fixed album art box being too long in horizontal and vertical view
- Fixed an issue where the album art would stay visible
- Fixed track starting from playhead position of last loaded track when no song load options are set
- Fixed an issue being unable to jump to a letter when inside a crate
- Fixed an issue turning MIDI output lighting ON when mapping Sync
- Fixed a possible dropout switching between Fav FX banks before FX are turned on
- Fixed MIDI Output lighting not toggling for Sampler midi mappable controls
- Fixed MIDI Mapped Video upfader not working unless upfader link is enabled
- Fixed Sampler panel height not returning correctly when closed
- Fixed bloated iTunes XML causing a crash
- Fixed a potential crash when resizing application window continuously
- Fixed a potential crash on exit
- Updated the auto backup message on exit screen
- Updated various tooltips and translations
- Updated application icons
更新時間：2018-02-25
更新細節：
What's new in this version:
BUG FIXES:
The following vulnerabilities have been fixed:
- [1]wnpa-sec-2018-05 The IEEE 802.11 dissector could crash
- [4]wnpa-sec-2018-06 Multiple dissectors could go into large infinite loops
- [19]wnpa-sec-2018-07 The UMTS MAC dissector could crash
- [22]wnpa-sec-2018-08 The DOCSIS dissector could crash
- [25]wnpa-sec-2018-09 The FCP dissector could crash
- [28]wnpa-sec-2018-10 The SIGCOMP dissector could crash
- [31]wnpa-sec-2018-11 The pcapng file parser could crash
- [34]wnpa-sec-2018-12 The IPMI dissector could crash
- [37]wnpa-sec-2018-13 The SIGCOMP dissector could crash
- [40]wnpa-sec-2018-14 The NBAP disssector could crash
The following bugs have been fixed:
- Change placement of "double chevron" in Filter Toolbar to eliminate overlap
- AutoScroll does not work
- BOOTP/DHCP: malformed packet -> when user class option (77) is present
- GET MAX LUN wLength decoded as big-endian - USB Mass Storage
- Unable to create Filter Expression Button for a yellow filter
- Buildbot crash output: fuzz-2018-01-28-15874.pcap
- NetScaler RPC segmentation fault / stack overflow
- [oss-fuzz] #6028 RPC_NETLOGON: Direct-leak in g_malloc (generate_hash_key)
- Newline "n" in packet list field increase line height for all rows
- ieee80211-radio.c preamble duration calculation not correct
- DIS: Malformed packet in SISO-STD-002 transmitter
UPDATED PROTOCOL SUPPORT:
- ASN.1 BER, BOOTP/DHCP, DCE RPC NETLOGON, DICOM, DIS, DMP, DOCSIS, EPL, FCP, GSM A RR, HSRP, IAX2, IEEE 802.11, Infiniband, IPMI, IPv6, LDAP, LLTD, NBAP, NetScaler RPC, OpenFlow, RELOAD, RPCoRDMA, RPKI-Router, S7COMM, SCCP, SIGCOMP, Thread, Thrift, TLS/SSL, UMTS MAC, USB, USB Mass Storage, and WCCP
NEW AND UPDATED CAPTURE FILE SUPPORT:
- pcap pcapng
更新時間：2018-01-11
更新細節：
What's new in this version:
Bug Fixes:
- wnpa-sec-2018-01
- Multiple dissectors could crash
- wnpa-sec-2018-03
- The IxVeriWave file parser could crash
- wnpa-sec-2018-04
- The WCP dissector could crash
- Prior to this release dumpcap enabled the Linux kernel’s BPF JIT compiler via the net.core.bpf_jit_enable sysctl. This could make systems more vulnerable to Spectre variant 1 (CVE-2017-5753) and this feature has been removed
- Some keyboard shortcut mix-up has been resolved by assigning new shortcuts to Edit ? Copy methods
- Remote interfaces are not saved
- Additional grouping in Expert Information dialog
- First start with non-empty extcap folder after install or reboot hangs at "initializing tap listeners"
- Can’t hide expert categories in Expert Information
- Expert info dialog should have "Collapse All"/"Expand All" options
- SIP Statistics extract does not work
- Service Response Time - SCSI dialog crashes
- Wireshark & Tshark 2.4.2 core dumps with segmentation fault
- SSH remote capture promiscuous mode
- SOCKS pseudo header displays incorrect Version value
- Only first variable of list is dissected in NTP Control request message
- NTP Authenticator field dissection fails if padding is used
- BSSAP packet dissector issue - BSSAP_UPLINK_TUNNEL_REQUEST message
- "[Malformed Packet]" for Mobile IP (MIP) protocol
- There is a potential buffer underflow in File_read_line function in epan/wslua/wslua_file.c file
- Saving a temporary capture file may not result in the temporary file being removed
Updated Protocol Support:
- Bluetooth, BSSAP, BT ATT, BT HCI, BT SMP, MIP, NTP, SCTP, SOCKS, UDS, and WCP
New and Updated Capture File Support:
- Ixia IxVeriWave
更新時間：2017-12-01
更新細節：
What's new in this version:
Bug Fixes:
- [1]wnpa-sec-2017-47 The IWARP_MPA dissector could crash
- [3]wnpa-sec-2017-48 The NetBIOS dissector could crash
- [5]wnpa-sec-2017-49 The CIP Safety dissector could crash
- "tshark -G ?" doesn't provide expected help
- File loading is very slow with TRANSUM dissector enabled
- packet-knxnetip.c:936: bad bitmask ?
- packet-q931.c:1306: bad compare ?
- SSL Dissection bug
- Wireshark crashes when exporting various files to .csv, txt and other `non-capture file' formats
- RLC reassembly doesn't work for RLC over UDP heuristic dissector
- HTTP Object export fails with long extension (possibly query string)
- 3GPP Civic Address not displayed in Packet Details
- Wireshark prefers packet.dll in System32Npcap over the one in System32
- PEEKREMOTE dissector does not decode 11ac MCS rates properly
- Visual Studio Community Edition 2015 lacks tools named in developer guide
- TCP: Malformed data with Riverbed Probe option
- Wireshark Crash when trying to use Preferences | Advanced
- Right click on SMB2 Message ID and then Apply as Column causes Runtime Error
- Return [Enter] should apply change (Column title - Button Label toolbars)
- Wireshark crashes if "rip.display_routing_domain" is set to TRUE in preferences file
- Entry point inflatePrime not found for androiddump.exe and randpktdump.exe
- BGP: IPv6 NLRI is received with Add-path ID, then Wire shark is not able to decode the packet correctly
- Wrong SSL decryption when using EXTENDED MASTER SECRET and Client certificate request (mutual authentication)
- Frame direction isn't always set if it comes from the pcapng record header rather than the packet pseudo-header
Updated Protocol Support:
- 3GPP NAS, BGP, CIP Safety, DTLS, IEEE 802.11 Radio, IWARP_MPA, KNXnet/IP, LCSAP, MQTT, NetBIOS, PEEKREMOTE, Q.931, RIP, RLC, SIP, SSL/TLS, TCP, and TRANSUM
更新時間：2017-12-01
更新細節：
What's new in this version:
Bug Fixes:
- [1]wnpa-sec-2017-47 The IWARP_MPA dissector could crash
- [3]wnpa-sec-2017-48 The NetBIOS dissector could crash
- [5]wnpa-sec-2017-49 The CIP Safety dissector could crash
- "tshark -G ?" doesn't provide expected help
- File loading is very slow with TRANSUM dissector enabled
- packet-knxnetip.c:936: bad bitmask ?
- packet-q931.c:1306: bad compare ?
- SSL Dissection bug
- Wireshark crashes when exporting various files to .csv, txt and other `non-capture file' formats
- RLC reassembly doesn't work for RLC over UDP heuristic dissector
- HTTP Object export fails with long extension (possibly query string)
- 3GPP Civic Address not displayed in Packet Details
- Wireshark prefers packet.dll in System32Npcap over the one in System32
- PEEKREMOTE dissector does not decode 11ac MCS rates properly
- Visual Studio Community Edition 2015 lacks tools named in developer guide
- TCP: Malformed data with Riverbed Probe option
- Wireshark Crash when trying to use Preferences | Advanced
- Right click on SMB2 Message ID and then Apply as Column causes Runtime Error
- Return [Enter] should apply change (Column title - Button Label toolbars)
- Wireshark crashes if "rip.display_routing_domain" is set to TRUE in preferences file
- Entry point inflatePrime not found for androiddump.exe and randpktdump.exe
- BGP: IPv6 NLRI is received with Add-path ID, then Wire shark is not able to decode the packet correctly
- Wrong SSL decryption when using EXTENDED MASTER SECRET and Client certificate request (mutual authentication)
- Frame direction isn't always set if it comes from the pcapng record header rather than the packet pseudo-header
Updated Protocol Support:
- 3GPP NAS, BGP, CIP Safety, DTLS, IEEE 802.11 Radio, IWARP_MPA, KNXnet/IP, LCSAP, MQTT, NetBIOS, PEEKREMOTE, Q.931, RIP, RLC, SIP, SSL/TLS, TCP, and TRANSUM
更新時間：2017-10-11
更新細節：
What's new in this version:
The following bugs have been fixed:
- wnpa-sec-2017-42
- BT ATT dissector crash (Bug 14049) CVE-2017-15192
- wnpa-sec-2017-43
- MBIM dissector crash (Bug 14056) CVE-2017-15193
- wnpa-sec-2017-44
- DMP dissector crash (Bug 14068) CVE-2017-15191
- wnpa-sec-2017-45
- RTSP dissector crash (Bug 14077) CVE-2017-15190
- wnpa-sec-2017-46
- DOCSIS infinite loop (Bug 14080) CVE-2017-15189
- Wireshark crash when end capturing with "Update list of packets in real-time" option off. (Bug 13024)
- Diameter service response time statistics broken in 2.2.4. (Bug 13442)
- Sequence number isn’t shown as the X axis in TCP Stream Graph - RTT. (Bug 13740)
- Using an SSL subdissector will cause SSL data to not be decoded (related to reassembly of application data). (Bug 13885)
- Wireshark 2.4.0 doesn’t build with Qt 4.8. (Bug 13909)
- Some Infiniband Connect Req fields are not decoded correctly. (Bug 13997)
- Voip Flow Sequence button crash. (Bug 14010)
- wireshark-2.4.1/epan/dissectors/packet-dmp.c:1034: sanity check in wrong place ?. (Bug 14016)
- wireshark-2.4.1/ui/qt/tcp_stream_dialog.cpp:1206: sanity check in odd place ?. (Bug 14017)
- [oss-fuzz] ASAN: 232 byte(s) leaked in 4 allocation(s). (Bug 14025)
- [oss-fuzz] ASAN: 47 byte(s) leaked in 1 allocation(s). (Bug 14032)
- Own interface toolbar logger dialog for each log command. (Bug 14033)
- Wireshark crashes when dissecting DOCSIS REGRSPMP which contains UCD. (Bug 14038)
- Broken installation instructions for Visual Studio Community Edition. (Bug 14039)
- RTP Analysis "save as CSV" saves twice the forward stream, if two streams are selected. (Bug 14040)
- VWR file read ends early with vwr: Invalid data length 0. (Bug 14051)
- reordercap fails with segmentation fault 11 on MacOS. (Bug 14055)
- Cannot Apply Bitmask to Long Unsigned. (Bug 14063)
- text2pcap since version 2.4 aborts when there are no arguments. (Bug 14082)
- gtpprime: Missing in frame.protocols. (Bug 14083)
- HTTP dissector believes ICY response is a request. (Bug 14091)
Updated Protocol Support:
- 6LoWPAN, Bluetooth, BOOTP/DHCP, BT ATT, BT LE, DCERPC, DMP, DOCSIS, EPL, GTP, H.248, HTTP, InfiniBand, MBIM, RPC, RTSP, SSL, and WSP
New and Updated Capture File Support:
Vendor-supplied Packages:
- Most Linux and Unix vendors supply their own Wireshark packages. You can usually install or upgrade Wireshark using the package management system specific to that platform. A list of third-party packages can be found on the download page on the Wireshark web site
File Locations:
- Wireshark and TShark look in several different locations for preference files, plugins, SNMP MIBS, and RADIUS dictionaries. These locations vary from platform to platform. You can use About→Folders to find the default locations on your system