Wireshark (64-bit) 歷史版本列表 Page3

最新版本 Wireshark 4.2.3 (64-bit)

Wireshark (64-bit) 歷史版本列表

Ethereal 網絡協議分析儀已經改名為 Wireshark 64 位。名字可能是新的,但軟件是一樣的。 Wireshark 的強大功能使其成為全球網絡故障排除,協議開發和教育的首選工具.Wireshark 是由全球網絡專家撰寫的,是開源功能的一個例子。 Wireshark 64 位被世界各地的網絡專業人士用於分析,故障排除,軟件和協議開發和教育。該程序具有協議分析儀所期望的所有標準功能,以及其... Wireshark (64-bit) 軟體介紹


HoneyView 5.50 查看版本資訊

更新時間:2022-10-27
更新細節:

What's new in this version:

- Fixed a security issue occurring with the DDS format
- Fixed a security issue occurring with the BMP format
- Other modifications

Wireshark 4.0.0 (64-bit) 查看版本資訊

更新時間:2022-10-05
更新細節:

What's new in this version:

- We no longer ship official 32-bit Windows packages starting with this release. If you need to use Wireshark on that platform, we recommend using the latest 3.6 release. Issue 17779
- The display filter syntax is more powerful with many new extensions. See below for details.
- The Conversation and Endpoint dialogs have been redesigned. See below for details
- The default main window layout has been changed so that the Packet Detail and Packet Bytes are side by side underneath the Packet List pane
- Hex dump imports from Wireshark and from text2pcap have been improved. See below for details.
- Speed when using MaxMind geolocation has been greatly improved
- The tools and libraries required to build Wireshark have changed. See “Other Development Changes” below for more details.
- Many other improvements have been made. See the “New and Updated Features” section below for more details.

New and Updated Features:
The following features are new (or have been significantly updated) since version 4.0.0rc2:
- Nothing of note

The following features are new (or have been significantly updated) since version 4.0.0rc1:
- The macOS packages now ship with Qt 6.2.4 and require macOS 10.14. They previously shipped with Qt 5.15.3
- The Windows installers now ship with Npcap 1.71. They previously shipped with Npcap 1.70

The following features are new (or have been significantly updated) since version 3.7.2:
- The Windows installers now ship with Npcap 1.70. They previously shipped with Npcap 1.60.

The following features are new (or have been significantly updated) since version 3.7.1:
- The 'v' (lower case) and 'V' (upper case) switches have been swapped for editcap and mergecap to match the other command line utilities.
- The ip.flags field is now only the three high bits, not the full byte. Display filters and Coloring rules using the field will need to be adjusted.
- New address type AT_NUMERIC allows simple numeric addresses for protocols which do not have a more common-style address approach, analog to AT_STRINGZ.

The following features are new (or have been significantly updated) since version 3.7.0:
- The Windows installers now ship with Qt 6.2.3. They previously shipped with Qt 6.2.4.

The Conversation and Endpoint dialogs have been redesigned with the following improvements:
- The context menu now includes the option to resize all columns, as well as copying elements
- Data may be exported as JSON
- Tabs may be detached and reattached from the dialog
- Adding and removing tabs will keep them in the same order all the time
- If a filter is applied, two columns are shown in either dialog detailing the difference between unmatched and matched packets
- Columns are now sorted via secondary properties if an identical entry is found
- Conversations are sorted via second address and first port number
- Endpoints are sorted via port numbers
- IPv6 addresses are sorted correctly after IPv4 addresses
- The dialog elements have been moved to make it easier to handle for new users
- Selection of tap elements is done via a list
- All configurations and options are done via a left side button row
- Columns for the Conversations and Endpoint dialogs can be hidden by a context menu
- TCP and UDP conversations now include the stream ID and allow filtering on it

The following features are new (or have been significantly updated) since version 3.6.0:
- The Windows installers now ship with Npcap 1.60. They previously shipped with Npcap 1.55.
- The Windows installers now ship with Qt 6.2.4. They previously shipped with Qt 5.12.2.

The display filter syntax has been updated and enhanced:
- A syntax to match a specific layer in the protocol stack has been added. For example in an IP-over-IP packet “ip.addr#1 == 1.1.1.1” matches the outer layer addresses and “ip.addr#2 == 1.1.1.2” matches the inner layer addresses.
- Universal quantifiers "any" and "all" have been added to any relational operator. For example the expression "all tcp.port > 1024" is true if and only if all tcp.port fields match the condition. Previously only the default behaviour to return true if any one field matches was supported.
- Field references, of the form ${some.field}, are now part of the syntax of display filters. Previously they were implemented as macros. The new implementation is more efficient and has the same properties as protocol fields, like matching on multiple values using quantifiers and support for layer filtering.
- Arithmetic is supported for numeric fields with the usual operators “+”, “-”, “*”, “/”, and “%”. Arithmetic expressions must be grouped using curly brackets (not parenthesis).
- New display filter functions max(), min() and abs() have been added.
- Functions can accept expressions as arguments, including other functions. Previously only protocol fields and slices were syntactically valid function arguments.
- A new syntax to disambiguate literals from identifiers has been added. Every value with a leading dot is a protocol or protocol field. Every value in between angle brackets is a literal value. See the User’s Guide for details.
- The "bitwise and" operator is now a first-class bit operator, not a boolean operator. In particular this means it is now possible to mask bits, e.g.: frame[0] & 0x0F == 3.
- Dates and times can be given in UTC using ISO 8601 (with 'Z' timezone) or by appending the suffix "UTC" to the legacy formats. Otherwise local time is used
- Integer literal constants may be written in binary (in addition to decimal/octal/hexadecimal) using the prefix "0b" or "0B"
- Logical AND now has higher precedence than logical OR, in line with most programming languages

It is now possible to index protocol fields from the end using negative indexes. For example the following expression tests the last two bytes of the TCP protocol field: tcp[-2:] == AA:BB. This was a longstanding bug that has been fixed in this release.
- Set elements must be separated using a comma, e.g: {1, 2, "foo"}. Using only whitespace as a separator was deprecated in 3.6 and is now a syntax error.
- Support for some additional character escape sequences in double quoted strings has been added. Along with octal (<number>) and hex (x<number>) encoding, the following C escape sequences are now supported with the same meaning: a, b, f, n, r, t, v. Previously they were only supported with character constants.
- Unicode universal character names are now supported with the escape sequences uNNNN or UNNNNNNNN, where N is a hexadecimal digit
- Unrecognized escape sequences are now treated as a syntax error. Previously they were treated as a literal character. In addition to the sequences indicated above, backslash, single quotation and double quotation mark are also valid sequences: , ', ".
- A new strict equality operator "===" or "all_eq" has been added. The expression "a === b" is true if and only if all a’s are equal to b. The negation of "===" can now be written as "!==" (any_ne).
- The aliases "any_eq" for "==" and "all_ne" for "!=" have been added
- The operator "~=" is deprecated and will be removed in a future version. Use "!==", which has the same meaning instead
- Floats must be written with a leading and ending digit. For example the values ".7" and "7." are now invalid as floats. They must be written "0.7" and "7.0" respectively.
- The display filter engine now uses PCRE2 instead of GRegex (GLib’s bindings to the older and end-of-life PCRE library). PCRE2 is compatible with PCRE so any user-visible changes should be minimal. Some exotic patterns may now be invalid and require rewriting.
- Literal strings can handle embedded null bytes (the value '') correctly. This includes regular expression patterns. For example the double-quoted string " is a null byte" is a legal literal value. This may be useful to match byte patterns but note that in general protocol fields with a string type still cannot contain embedded null bytes.
- Booleans can be written as True/TRUE or False/FALSE. Previously they could only be written as 1 or 0.
- It is now possible to test for the existence of a slice
- All integer sizes are now compatible. Unless overflow occurs any integer field can be compared with any other.

The text2pcap command and the “Import from Hex Dump” feature have been updated and enhanced:
- text2pcap supports writing the output file in all the capture file formats that wiretap library supports, using the same -F option as editcap, mergecap, and tshark.
- Consistent with the other command line tools like editcap, mergecap, tshark, and the "Import from Hex Dump" option within Wireshark, the default capture file format for text2pcap is now pcapng. The -n flag to select pcapng (instead of the previous default, pcap) has been deprecated and will be removed in a future release.
- text2pcap supports selecting the encapsulation type of the output file format using the wiretap library short names with an -E option, similar to the -T option of editcap.
- text2pcap has been updated to use the new logging output options and the -d flag has been removed. The "debug" log level corresponds to the old -d flag, and the "noisy" log level corresponds to using -d multiple times.
- text2pcap and “Import from Hex Dump” support writing fake IP, TCP, UDP, and SCTP headers to files with Raw IP, Raw IPv4, and Raw IPv6 encapsulations, in addition to Ethernet encapsulation available in previous versions.
- text2pcap supports scanning the input file using a custom regular expression, as supported in “Import from Hex Dump” in Wireshark 3.6.x.
- In general, text2pcap and wireshark’s “Import from Hex Dump” have feature parity.
- The default main window layout has been changed so that the Packet Detail and Packet Bytes are side by side underneath the Packet List pane.
- The HTTP2 dissector now supports using fake headers to parse the DATAs of streams captured without first HEADERS frames of a long-lived stream (such as a gRPC streaming call which allows sending many request or response messages in one HTTP2 stream). Users can specify fake headers using an existing stream’s server port, stream id and direction.
- The IEEE 802.11 dissector supports Mesh Connex (MCX).
- The “Capture Options” dialog contains the same configuration icon as the Welcome Screen. It is now possible to configure interfaces there.
- The “Extcap” dialog remembers password items during runtime, which makes it possible to run extcaps multiple times in row without having to reenter the password each time. Passwords are never stored on disk.
- It is possible to set extcap passwords in tshark and other CLI tools
- The extcap configuration dialog now supports and remembers empty strings. There are new buttons to reset values back to their defaults.
- Support to display JSON mapping for Protobuf message has been added
- macOS debugging symbols are now shipped in separate packages, similar to Windows packages
- In the ZigBee ZCL Messaging dissector the zbee_zcl_se.msg.msg_ctrl.depreciated field has been renamed to zbee_zcl_se.msg.msg_ctrl.deprecated
- The interface list on the welcome page sorts active interfaces first and only displays sparklines for active interfaces. Additionally, the interfaces can now be hidden and shown via the context menu in the interface list
- The Event Tracing for Windows (ETW) file reader now supports displaying IP packets from an event trace logfile or an event trace live session
- ciscodump now supports IOS, IOS-XE and ASA remote capturing

Removed Features and Support:
- The CMake options starting with DISABLE_something were renamed ENABLE_something for consistency. For example DISABLE_WERROR=On became ENABLE_WERROR=Off. The default values are unchanged.

New Protocol Support:
- Allied Telesis Loop Detection (AT LDF), AUTOSAR I-PDU Multiplexer (AUTOSAR I-PduM), DTN Bundle Protocol Security (BPSec), DTN Bundle Protocol Version 7 (BPv7), DTN TCP Convergence Layer Protocol (TCPCL), DVB Selection Information Table (DVB SIT), Enhanced Cash Trading Interface 10.0 (XTI), Enhanced Order Book Interface 10.0 (EOBI), Enhanced Trading Interface 10.0 (ETI), FiveCo’s Legacy Register Access Protocol (5co-legacy), Generic Data Transfer Protocol (GDT), gRPC Web (gRPC-Web), Host IP Configuration Protocol (HICP), Huawei GRE bonding (GREbond), Locamation Interface Module (IDENT, CALIBRATION, SAMPLES - IM1, SAMPLES - IM2R0), Mesh Connex (MCX), Microsoft Cluster Remote Control Protocol (RCP), Open Control Protocol for OCA/AES70 (OCP.1), Protected Extensible Authentication Protocol (PEAP), Realtek, REdis Serialization Protocol v2 (RESP), Roon Discovery (RoonDisco), Secure File Transfer Protocol (sftp), Secure Host IP Configuration Protocol (SHICP), SSH File Transfer Protocol (SFTP), USB Attached SCSI (UASP), and ZBOSS Network Coprocessor product (ZB NCP)

Updated Protocol Support:
- Too many protocols have been updated to list here

New and Updated Capture File Support:
- There is no new or updated capture file support in this release

Major API Changes:
- proto.h: The field display types "STR_ASCII" and "STR_UNICODE" have been removed. Use "BASE_NONE" instead.
- proto.h: The field display types for floats have been extended and refactored. The type BASE_FLOAT has been removed. Use BASE_NONE instead. New display types for floats are BASE_DEC, BASE_HEX, BASE_EXP and BASE_CUSTOM.
- The Wireshark Lua API now uses the lrexlib bindings to PCRE2. Code using the Lua GRegex module will have to be updated to use lrexlib-pcre2 instead. In most cases the API should be compatible and the conversion just requires a module name change.
- The tap registration system has been updated and the list of arguments for tap_packet_cb has changed. All taps registered through register_tap_listener have to be updated.

Other Development Changes:
- The PCRE2 library is now required to build Wireshark
- You must now have a compiler with C11 support in order to build Wireshark

The following libraries and tools have had their minimum required version increased:
- CMake 3.10 is required on macOS and Linux
- Qt version 5.12 (was 5.6.0), although compilation with 5.10 and 5.11 is still possible, but will trigger a warning during configuration
- Windows SDK 10.0.18362.0 is required due to issues with C11 support

macOS version 10.11 to 10.14 (was 10.8) is required depending on the version of Qt:
- Qt 5.10 or higher requires macOS version 10.11
- Qt 5.12 or higher requires macOS version 10.12
- Qt 5.14 or higher requires macOS version 10.13
- Qt 6.0 or higher requires macOS version 10.14
- GLib version 2.50.0 (was 2.38.0) is required
- Libgcrypt version 1.8.0 (was 1.5.0) is required
- c-ares version 1.13.0 (was 1.5.0)
- Python version 3.6.0 (was 3.4.0)
- GnuTLS version 3.5.8 (was 3.3.0)
- Nghttp2 minimum version has been set to 1.11.0 (none previous)
- Perl is no longer required to build Wireshark, but may be required to build some source code files and run code analysis checks

Wireshark 3.6.8 (64-bit) 查看版本資訊

更新時間:2022-09-08
更新細節:

What's new in this version:

New:
- This is the last release branch with support for 32-bit Windows. Updates will no longer be available after May 22, 2024 for that platform

Fixed:
- TCAP Malformed exception on externally re-assembled packet
- Extended 3GPP-GPRS-Negotiated-QoS-profile strings decoded incompletely
- HTTP2 dissector decodes first SSL record only
- L2TP improvements - cookie length detection, UDP encapsulation and more
- USB Truncation of URB_isochronous in frames
- ISUP/BICC parameter summary text duplication
- Running rpm-setup.sh shows missing packages that Centos does not need
- IPX/IPX RIP: Crash on expand subtree
- Qt: A file or packet comment that is too large will corrupt the pcapng file
- BGP dissector bug
- Wrong interpretation of the cbsp.rep_period field in epan/dissectors/packet-gsm_cbsp.c
- Assertion due to incorrect mask for btatt.battery_power_state.*
- Qt: Expert Info dialog not showing Malformed Frame when Frame length is less than captured length
- Wireshark and tshark become non-responsive when reading certain packets

GameMaker Studio 2022.8.0.34 查看版本資訊

更新時間:2022-09-08
更新細節:

What's new in this version:

- August’s release focuses on a lot of clean-up as we head towards an LTS release later in the year - some old or underused platforms have now been removed
- Many project-saving, performance, or stability changes have been made
- And we have made a big improvement to tile-encoding in rooms, which does require a change in project version because older GameMaker versions will not be able to read those tile layers (so please do read these release notes carefully!)

TIDAL Desktop 2.33.2 查看版本資訊

更新時間:2022-09-08
更新細節:

GameMaker Studio 2022.6.1.26 查看版本資訊

更新時間:2022-07-29
更新細節:

What's new in this version:

- June’s release brings Feather for everyone who wants to try it, and includes lots of fixes for Feather and also the current Syntax Errors system; adds 5 more Filter types you can use in your games; introduces more functionality when creating and using your extensions; brings microphone support to the Opera GX target; changes the Switch crash-reporter to be Nintendo’s own system; and fixes a number of issues with the collision system.

Wireshark 3.6.7 (64-bit) 查看版本資訊

更新時間:2022-07-28
更新細節:

What's new in this version:

New:
- This is the last release branch with support for 32-bit Windows. Updates will no longer be available after May 22, 2024 for that platform.

Fixed:
The following bugs have been fixed:
- Multiple Files preference "Create new file automatically…​after" [time] working incorrectly
- get_filter Lua function doesn’t return the filter
- Dissector bug, protocol HTTP failed assertion "saved_layers_len < 500" with chunked/multipart
- Wrong EtherCAT bit label (possible dissector bug)
- UDP packets falsely marked as "malformed packet"
- TLS certificate parser with filter crash
- Incorrect type for the IEC 60870 APDU appears in packet details pane
- NHRP Problem
- EtherCAT CoE header unknown type

Wireshark 3.6.6 (64-bit) 查看版本資訊

更新時間:2022-06-16
更新細節:

What's new in this version:

Fixed:
- TLS: RSA decryption fails with Extended Master Secret and renegotiation
- "dfilter" file on Windows adds carriage returns, and requires line feeds
- Npcap bundled version needs a bump to v1.60 for Windows 11 compatibility
- "Browse" button in Prefs/Name Resolution/MaxMind crashes Wireshark on macOS
- TFTP: some packets are not recognized as TFTP packets with 3.6.5

Wireshark 3.6.5 (64-bit) 查看版本資訊

更新時間:2022-05-05
更新細節:

What's new in this version:

Fixed:
- This release fixes an installation issue on Windows which was introduced in the 3.6.4 release

Balabolka Portable 2.15.0.818 查看版本資訊

更新時間:2022-05-05
更新細節:

What's new in this version:

- Added the using of FPT.AI Text-To-Speech
- Fixed the YouTube subtitles downloading
- Fixed small bugs
- Resources for German and Spanish languages were updated