Windscribe 歷史版本列表
更新時間：2020-07-08
更新細節：
What's new in this version:
Features:
- Bugfix: #381 and more Some bugs fixed that happened specifically on MacOS. 1.) A segfault that happened in LVS 2.) Some classes were not properly registered for usage in scripts
- Bugfix: #493 LVS asserted on MacOS
- Enhancement: #586 As a safety feature, the stream writers now refuse to write layouts with cells carrying the same names. Writing such layers would result in corrupted or invalid layout files
- Bugfix: #589 (tentative) On Anaconda-based builds for MacOS 10.15 (Catalina) a loss of instances was observed. This could be traced down to compiler/library incompatibilities but not further.
- Enhancements: #591 Two enhancements in the macro editor: 1.) A crash happening when adding a new location was fixed 2.) The template selection popup can now be disabled by dismissing the tip dialog
- Bugfix: #592 Reading a file into a layout with unnamed layers caused problems with layer mapping specs
- Bugfix: #596 Library#_destroy was crashing the application. As this function must not be called, it's rerouted to "nothing" for backward compatibility
- Enhancement: #603 The "adjust origin" feature now allows specifying the target coordinates for the adjustment
- Bugfix: #610 An internal error happened for certain hierarchical configurations on netlist extraction
- Enhancement: LVS netlist compare The algorithm was improved to provide better reproducibility. The detection of matching paths in the presence of ambiguities was improved. In addition, the netlist compare now favours net names for resolving ambiguities. So if nets are named the same in the layout and the schematic, ambiguities are resolved based on these names. This is usually more efficient. A new function is available to turn this feature off: "consider_net_names(false)".
更新時間：2020-06-06
更新細節：
What's new in this version:
- Enhancement: Skip comment lines with // in RVE DB reader
- Bugfix: Doc fixes, better error messages on some Shape methods
- Bugfix: Using 64bit coordinates on RVE reader to avoid overflow
- Bugfix: Spice reader: .global should not add pin if the signal isn't used in a subcircuit
- Bugfix: A CIF reader and writer bug was fixed
- Bugfix: Perimenter can be included in antenna area for the antenna check. This also includes a mode in which only the perimeter is considered
- Enhancement: A library can be associated with multiple technologies now
- Bugfix: width of cell and library side panels could not be reduced below the width of the selection boxes in the header
- Bugfix: cell view selection header text did not get updated when saving the layout to a different file
更新時間：2020-05-05
更新細節：
What's new in this version:
Bugfix:
- An internal error happened on netlist flatten sometimes
- Failed queries leave layout in undefined state
- Report true source line in DRC and LVS verbose mode
- Makes script debugging more reliable
- Duplicate .global statements in SPICE netlists created duplicate pins
- A shielding issue was fixed for DRC space measurements
- tool bug with paths Differences in path points where no reported
Enhancement:
- documentation clarifications and typos fixed
- Wildcard layer mapping for stream readers
更新時間：2020-03-05
更新細節：
What's new in this version:
Features:
Bugfix:
- DEF reader could not read VIAS+VIARULE without pattern
- Issues with "target" switching in DRC solved
- Missing letter "J" in Times font .. actually this bug is of 1967
- Layout queries could not use the "shapes" method
- "isolated" DRC function reported duplicate marker shapes
- Performance enhancement of L2N/LVS DB file loader
- Fixed builds on CentOS 8 and Fedora 31
- Issues with ownership transfer fixed in Qt binding
- Issues with AbsoluteProgressReporter in scripts fixed
- Enhancement:
- Leaner way to specify LVS compare tolerances for device parameters
- Direct access to image data in scripts (array of values instead of per-pixel calls)
- "join_symmetric_nets" feature in LVS for implementing "split gate" configurations
- There is a "save as" function available now in the macro editor (in context menu of the macro tree)
- Pin names can be attached as properties to port and pin shapes when reading LEF or DEF
- Option to limit number of shapes for net tracer
更新時間：2020-01-07
更新細節：
What's new in this version:
- Bugfix: A crash happened when accessing layer properties tabs with an invalid index in Ruby or Python
- Bugfix: Problem building a layer tree with "add_child" (Ruby/Python)
- Bugfix: Configuring a layer color with a group node was not effective over multiple levels of hierarchy
- Enhancement: MOS transistor gate figures can be more generic now, e.g. ring-like or non-rectangular
- Bugfix: A net extraction bug related to certain array/array interactions is fixed
更新時間：2018-09-12
更新細節：
What's new in this version:
Windscribe 1.83
New features:
- WebSocket stealth protocol support
- Location list sorting methods: Geography, alphabet, latency
- A la carte location support (future feature)
- Static IP + port forwarding support
- Custom OpenVPN config support
Put your own OpenVPN configs in the following directory:
- C:UsersUSERNAMEAppDataLocalWindscribeWindscribecustom_configs
- ~/Library/Application Support/Windscribe/Windscribe/custom_configs
- They will now be available in the Windscribe UI. You can take advantage of all Windscribe client features (firewall, proxy gateway, wifi sharing, etc) with your own OpenVPN server. Or use another VPN provider’s servers if you wish
Fixed bugs:
- Stuck on login in China
- App prevents graceful Windows shutdown
- App freezes in “Windscribe is shutting down” state
- Bad IKEv2 connection causes client to lock up
Other Changes:
- Don’t disable server location on ping test failure
Windscribe 1.82
- Change log not available for this version
Windscribe 1.81
New features:
- IKEv2 protocol support (manual and automatic mode)
- Emergency Connect / Secure Login
Fixed bugs:
- Wifi-sharing not working after wakeup
- Forcibly close all TCP sockets after tunnel up
- Don’t forcibly disconnect if currently connected node is missing from the server list
- Language detection defaults to English instead of Arabic
- Reinstall/enable WAN miniport adapters if missing/disabled
- Adjusted DPI to work with multiple scale factors
Other Changes:
- Added “Disconnecting” state
- Eliminated redundant API calls
- Reduced the server ping frequency
- Updated OpenVPN binaries to latest version
- Don't auto-enable the firewall (in Automatic mode) on computer start up if auto-connect is false
- Simplified installer flow + additional “custom install” options
- Async DNS resolver
- Adjusted node selection algorithm to favor lower latency nodes
- Forcibly expand certain locations when the country name is clicked
- Detect if LAN range is RFC-1918 complaint
To-do list for next version:
- CLI interface
- Favorite locations
- Dedicated IP support
- IKEv2 connectivity test
- SOCKS5 server UDP associate support
- Fix startup error on multi-user computers
- Mystery feature 1
- Mystery feature 2
Windscribe 1.80
New features:
- LAN proxy gateway
- Secure Hotspot (Experimental)
- Variable location drawer height
- Auto login after signup
- Ability to choose NDIS5 TAP driver
- Upgrade to OpenVPN 2.4.x with 2.3.x fallback
- Service notifications
- Show Pro data-centers to free users
- Location latency tool-tips added to signal bars
Fixed bugs:
- Always on firewall not working on OS boot on some machines
- Application crashes after connection attempts are exceeded with “minimize to tray” option checked
- Application freeze with firewall ON requires reboot
- API calls not made if app starts with no Internet connectivity
- Custom installation now allows for non-standard install path
- Auto-enable disabled TAP adapter
- 100% CPU when app starts with no Internet connectivity
- Don’t try UDP protocol if system proxy is configured
- Constant application window size on variable DPI screens
- Login form DPI bug
- On multi-screen computers, tool-tips show on primary monitor
Other Changes:
- Leave firewall ON if ran out of free bandwidth to prevent IP leak
- Increase reconnect timeout from 5 min to 1 hour
- Server list source changed
- Moved server location update process to separate thread
- Only do ping tests while disconnected
- Update available UI change
- Output installed anti-virus software into debug log for troubleshooting
- Open survey on application uninstall
- Installer command line arg support
- Black and white top bar icon on MacOS
- Ping nodes in batches instead of all at the same time
- Allow for verbose OpenVPN logging via Advanced Parameters screen
- When beta channel is selected, check for updates right away
To-do list for next version:
- IKEv2 protocol support
- Emergency Connect
- Firewall whitelisting overhaul
- Command line interface
- Wakeup from hibernation fix
- Add disconnecting state
- Async DNS resolver
Windscribe 1.70
- Added city level location selection
- Added Automatic Connection mode
- Added support for 22 languages
- Added custom TAP adapter
- Added “Ignore SSL Errors” option
- Added notifications when firewall is ON and application not connected
- Added “Advanced Parameters” screen
- Added EULA to the installer
- Added IPv6 connectivity disable button, to prevent WebRTC leaks over IPv6 in some situations
- Added Touch support
- Added Beta channel
- Fixed auto-start bug on some systems
- Fixed Internet connectivity check
- Fixed persistent session storage
- Fixed API connectivity on restrictive networks
- Fixed unquoted service path
- Fixed disappearing Best Location
- Fixed WSD port connectivity while firewall is ON
- Fixed PlayStation UPNP connectivity while firewall is ON
- Fixed reconnection bug on computer wake up on some systems
- Changed the Preferences screens
- Changed the connecting spinner animation
Windscribe 1.61
- Added ability to select connection port
- Added LAN proxy support
- Added speed ratings
- Added ability to add openvpn params externally
- Added using custom DNS while disconnected to prevent DNS poisoning
- Added custom API resolution field to combat advanced DNS poisoning
- Added “Best Location” to the location list
- Added connection testing after tunnel initiation
- Added tooltip for “no p2p” icon
- Fixed crashing in macOS Sierra
- Fixed LAN traffic bypass to work with UPnP devices
- Fixed debug log sender
- Fixed backup API usage logic
- Fixed CPU and energy usage
- Fixed multiple accounts info message
- Fixed multi-monitor menu placement in macOS
- Fixed Windows taskbar icon in collapsed mode
- Enable Base Filtering Engine if its disabled in Windows 7
- Changed openvpn config location to a permanent one
- Changed server list scrollbar to be more visible
- Changed XPC to sockets in macOS
- Changed TAP adapter metric on Windows 10
- Various stability fixes
更新時間：2018-09-12
更新細節：
What's new in this version:
NTLite 1.7.0.6500 (64-bit)
New:
- Tweaks: Cortana – Activity recommendations when switching devices
- Tweaks: Cortana – Use my signed-in devices history
- Components: ‘Recovery Reset support’ compatibility option
- Components: ‘Nvidia driver setup installer’ compatibility option
- Components: ‘Spotify’ compatibility option
Upgrade:
- Source: Windows 10 build 17755 RS5 preview support
- Components: Dynamic depenency linking among Apps
- Components: SMBv2 split into the Client and Server
- UI-Components: Unchecking master component will prompt before unchecking far dependees
Fix:
- Components: ‘Mixed Reality’ removal was breaking ‘Sensor Data Service’
- Components: ‘Store’ removal was breaking ‘Sticky Notes’
- Components: ‘LockApp’ removal could break Start menu
- UI: Unattended-Join network could select both radio buttons at once
- UI: Minimized error prompt blocking view
NTLite 1.6.3.6440 (64-bit)
- Change log not available for this version
NTLite 1.6.3.6400 (64-bit)
New:
- Tweaks: ‘Command Prompt in directory context menus’
- Tweaks: ‘Remote access to administrative shares’
- Tweaks: ‘Show People on the taskbar’
- Components: Manual option to permanently protect components in the settings.xml ‘LockComponents’
Update:
- Components: Disabling the Explorer warning “Indexing service not running” if Search is removed
- UI: Thanks for French (tistou), Chinese Simplified (Gskening)
Fix:
- Components: ‘Tablet PC’ and ‘Telemetry Client’ removals were breaking the ‘Sticky Notes’ app
- Components: Driver removal better separates multiple versions of the same driver
NTLite 1.6.3.6373 (64-bit)
- Change log not available for this version
NTLite 1.6.3.6240 (64-bit)
New:
- Source: Win10 RS5 17686 support
- Source: Load preset Overwrite/Append options
Update:
- UI-Translation: Thanks for French (tistou)
Fix:
- UI: Cancelling a second instance of the tool would crash on closing
NTLite 1.6.2.6220 (64-bit)
New:
- Updates: ‘Clean update backup’ split into modes (DISM, Compatible and Complete)
- Components: VPN support compatibility option
Update:
- UI: Light theme updated for more contrast
- UI-Translation: Thanks for French (tistou), Italian (gabritb01)
Fix:
- Updates-1803: Error 87 could happen in some environments when integrating a cumulative update with configuring Features
- Updates-Win7: Platform update integration order improvement, solves some extra Windows Update detection
- Components-1083: ‘ICS’ removal could cause OOBE setup reboot
- Components-Win7: ‘DWM’ removal could cause a ‘dwmapi.dll’ setup error
- Components-Win7: Search removal was breaking Shell search
NTLite 1.6.1.6190 (64-bit)
New:
- Source: Edit image edition Name and Description in the context menu
- Updates: .NET Framework 3.5 template option (Add-Template)
Update:
- UI-Translation: Thanks for Italian Installer (bovirus)
Fix:
- Source: Delete edition was temporarily hanging the UI
- Components: Defender removal could remove the empty Run key, now protected for compatibility
NTLite 1.6.0.6174 (64-bit)
Fix:
- Updates-1803: Integration error 32 when combining KB4135051 and .NET CAB
- Components: ‘Spell Checking’ and ‘Windows Update’ removals were causing Settings Language Options crash
- Components: ‘Mail’ removal could break the time tray Calendar popup
- Components: ‘Storage Service’ removal was breaking the Settings Apps list
- Components: ‘Skype’ app had no calling sound after some removals
- Components: ‘User Data Storage’ removal could crash the Mail app
- Components: ‘TPM’ removal could break the Firewall and Defender control panels
- Components-1607: ‘Hyper-V Guest’ removal could break a cumulative update install
Update:
- UI-Translation: Arabic and Chinese Simplified
NTLite 1.6.0.6146 (64-bit)
New:
- Settings-1709+: ‘Reopen my apps after an update or restart’
- Settings-1803: ‘Fullscreen optimizations’
Upgrade:
- UI-Translation: Thanks for French (tistou), Chinese Traditional (Matt), Russian (Den-s)
Fix:
- Updates: 1803 CU KB4100375 could popup an error after integration if used together with Adobe Flash update
- Unattended: Duplicate commands on repeat preset load could cause setup error
- Components-1803: Various leftovers
- Source: ESD compression now uses a number of cores instead of threads, for stability
- General: Multi-instance stability improvements in extreme scenarios
NTLite 1.6.0.6122 (64-bit)
Upgrade:
- UI-Translation: Thanks for Arabic (thamermousa), Farsi (Mona mon), Italian (gabritb01)
Fix:
- Source: 1803 RS4 Enterprise edition crucial package not detected message
- UI: Export progress during ESD to WIM conversion
NTLite 1.5.0.6105 (64-bit)
New:
- Settings: ‘Accent Color (LogonUI)’
Upgrade:
- Source: Win10 RS4 17128 support
- Components: ‘Storage Service’ in Win10 polished and unlocked as safer to remove
Fix:
- Components: Photos could autoclose after being removed and reinstalled from Store
- Components: LTSB image Windows Store detection
- Components: SFC removal was breaking VC-runtimes in Windows 7
- Components: EventLog removal could cause an OOBE loop in Win10 14393
- Components: ‘Language Pack setup’ removal made live only, breaks Settings-search if removed from image
- Components: Scanner drivers were protected from removal if Printing kept
- Settings: ‘Accent Color’ on images, Windows setup resets the value
- UI: Export progress bar could show incorrect values when multiple images were processed in sequence
- UI: Image Tasks checkboxes were not set correctly initially
NTLite 1.5.0.6080 (64-bit)
Upgrade:
- UI: Preset list header clickable for sorting by name
- UI: Better progress bar behavior when exporting multiple editions and preparing data
Fix:
- Post-setup: There could be command reordering mismatches after reloading previously edited image
- Components: Snapping tool removal was breaking OneNote (Desktop Experience missing message)
- Components: Removing Maps or Printing were breaking the Photos app
- Components: MiracastView removal could cause a long lasting blank screen on logon after 1607 CU install
- Components: Now allowing printer drivers removal if Printing and Windows Update kept (updating support balancing)
- Components: Containers removal could break Sysprep
- UI: Windows versions listed like before, in pre-RS4 (e.g. Windows 10 Pro instead of Windows Professional)
NTLite 1.5.0.6025 (64-bit)
New:
- Settings: ‘Display the lock screen’
- Settings: ‘Display last user name in logon screen’
- Settings: ‘Use classic logon’
- Components: ‘Volume Shadow Service API’
Upgrade:
- Source: Win10 RS4 17093 support
- UI-Translation: Thanks for French (tistou), Korean (Redrabbit), Chinese Traditional (Matt), Farsi (Mona mon),
- Portugues-Brasil (Igor), Spanish (Oleada), Arabic (thamermousa), Chinese Simplified (Gskening and jockeysoft),
- Dutch (Rene), Italian (gabritb01)
Fix:
- Components: Bluetooth removal was breaking Windows Mobile Hotspot Service
- Components: Bitlocker removal could break cumulative update in some cases
- Unattended: CopyProfile option was set in the wrong stage, non-functional
- Source: Crash could happen after saving the image
NTLite 1.5.0.5955 (64-bit)
Upgrade:
- UI-Translation: Thanks for Italian (gabritb01), Czech (Tom)
Fix:
- Updates: Language package integration wasn’t applied to boot.wim
- Source: boot.wim image edition deletion protection with ‘Manual setup’ kept unlocked for optional removal
NTLite 1.5.0.5930 (64-bit)
Upgrade:
- Source: Win10 RS4 17074 support
- Components: ‘Recovery Agent’ split from ‘Windows Recovery’ (needed for Bitlocker/TPM and UEFI/dual boot menus)
- Components: ISO image components, those outside of a WIM, grouped in their own section
- Components: Improved Feature configuration support after removals, use Windows Update compatibility option
- Components: Improved cumulative update component removal cleanup
Fix:
- Components-Win10: ‘MicrosoftStickyNotes’ removal was breaking ‘Edge’ PDF functionality
- Components-Win10: ‘Mixed Reality’ and ‘Media Streaming’ detection in N-editions
- Components: ‘IE Engine’ removal was breaking some portable apps
- Components-Win7: ‘Accessibility’ removal was breaking ‘Accessibility On-Screen Keyboard’
- Unattended-Win7: Localized images Administrator enabling
- UI-Translation: French, Russian, Italian, Dutch, Spanish, Farsi, Arabic, Chinese Simplified, Chinese Traditional, Portugues-Brasil
NTLite 1.5.0.5855 (64-bit)
Upgrade:
- Settings: Added Expand/Collapse buttons
Fix:
- Components: Win7 Shell Search removal was breaking Libraries
- Components: Loading preset after opening compatibilities was crashing
- Drivers: Inserting drivers from a directory named windows* would not show anything
- Post-setup: Adding second Command through the UI would do nothing, false duplicate detection
- UI: Tool visual style was not properly saved between restarts
NTLite 1.5.0.5840 (64-bit)
Upgrade:
- Source: Windows 10 RS4 17046 support
- Source: O&O Bluecon v15 boot.wim support
- Components: WinSxS Component Store removal includes update packages
Fix:
- Post-Setup: Command sorting could be mixed on some preset loads
- Post-Setup: Command applying would not indicate progress in identical commands with different parameters
- Components: Win10 1607 ‘Firewall’ and ‘Performance counters’ removals were breaking Metro UI
- Components: Win7 Search removal was breaking library shortcuts
更新時間：2018-06-29
更新細節：
What's new in this version:
Windscribe 1.82
- Change log not available for this version
Windscribe 1.81
New features:
- IKEv2 protocol support (manual and automatic mode)
- Emergency Connect / Secure Login
Fixed bugs:
- Wifi-sharing not working after wakeup
- Forcibly close all TCP sockets after tunnel up
- Don’t forcibly disconnect if currently connected node is missing from the server list
- Language detection defaults to English instead of Arabic
- Reinstall/enable WAN miniport adapters if missing/disabled
- Adjusted DPI to work with multiple scale factors
Other Changes:
- Added “Disconnecting” state
- Eliminated redundant API calls
- Reduced the server ping frequency
- Updated OpenVPN binaries to latest version
- Don't auto-enable the firewall (in Automatic mode) on computer start up if auto-connect is false
- Simplified installer flow + additional “custom install” options
- Async DNS resolver
- Adjusted node selection algorithm to favor lower latency nodes
- Forcibly expand certain locations when the country name is clicked
- Detect if LAN range is RFC-1918 complaint
To-do list for next version:
- CLI interface
- Favorite locations
- Dedicated IP support
- IKEv2 connectivity test
- SOCKS5 server UDP associate support
- Fix startup error on multi-user computers
- Mystery feature 1
- Mystery feature 2
Windscribe 1.80
New features:
- LAN proxy gateway
- Secure Hotspot (Experimental)
- Variable location drawer height
- Auto login after signup
- Ability to choose NDIS5 TAP driver
- Upgrade to OpenVPN 2.4.x with 2.3.x fallback
- Service notifications
- Show Pro data-centers to free users
- Location latency tool-tips added to signal bars
Fixed bugs:
- Always on firewall not working on OS boot on some machines
- Application crashes after connection attempts are exceeded with “minimize to tray” option checked
- Application freeze with firewall ON requires reboot
- API calls not made if app starts with no Internet connectivity
- Custom installation now allows for non-standard install path
- Auto-enable disabled TAP adapter
- 100% CPU when app starts with no Internet connectivity
- Don’t try UDP protocol if system proxy is configured
- Constant application window size on variable DPI screens
- Login form DPI bug
- On multi-screen computers, tool-tips show on primary monitor
Other Changes:
- Leave firewall ON if ran out of free bandwidth to prevent IP leak
- Increase reconnect timeout from 5 min to 1 hour
- Server list source changed
- Moved server location update process to separate thread
- Only do ping tests while disconnected
- Update available UI change
- Output installed anti-virus software into debug log for troubleshooting
- Open survey on application uninstall
- Installer command line arg support
- Black and white top bar icon on MacOS
- Ping nodes in batches instead of all at the same time
- Allow for verbose OpenVPN logging via Advanced Parameters screen
- When beta channel is selected, check for updates right away
To-do list for next version:
- IKEv2 protocol support
- Emergency Connect
- Firewall whitelisting overhaul
- Command line interface
- Wakeup from hibernation fix
- Add disconnecting state
- Async DNS resolver
Windscribe 1.70
- Added city level location selection
- Added Automatic Connection mode
- Added support for 22 languages
- Added custom TAP adapter
- Added “Ignore SSL Errors” option
- Added notifications when firewall is ON and application not connected
- Added “Advanced Parameters” screen
- Added EULA to the installer
- Added IPv6 connectivity disable button, to prevent WebRTC leaks over IPv6 in some situations
- Added Touch support
- Added Beta channel
- Fixed auto-start bug on some systems
- Fixed Internet connectivity check
- Fixed persistent session storage
- Fixed API connectivity on restrictive networks
- Fixed unquoted service path
- Fixed disappearing Best Location
- Fixed WSD port connectivity while firewall is ON
- Fixed PlayStation UPNP connectivity while firewall is ON
- Fixed reconnection bug on computer wake up on some systems
- Changed the Preferences screens
- Changed the connecting spinner animation
Windscribe 1.61
- Added ability to select connection port
- Added LAN proxy support
- Added speed ratings
- Added ability to add openvpn params externally
- Added using custom DNS while disconnected to prevent DNS poisoning
- Added custom API resolution field to combat advanced DNS poisoning
- Added “Best Location” to the location list
- Added connection testing after tunnel initiation
- Added tooltip for “no p2p” icon
- Fixed crashing in macOS Sierra
- Fixed LAN traffic bypass to work with UPnP devices
- Fixed debug log sender
- Fixed backup API usage logic
- Fixed CPU and energy usage
- Fixed multiple accounts info message
- Fixed multi-monitor menu placement in macOS
- Fixed Windows taskbar icon in collapsed mode
- Enable Base Filtering Engine if its disabled in Windows 7
- Changed openvpn config location to a permanent one
- Changed server list scrollbar to be more visible
- Changed XPC to sockets in macOS
- Changed TAP adapter metric on Windows 10
- Various stability fixes
更新時間：2018-03-27
更新細節：
What's new in this version:
Windscribe 1.81
New features:
- IKEv2 protocol support (manual and automatic mode)
- Emergency Connect / Secure Login
Fixed bugs:
- Wifi-sharing not working after wakeup
- Forcibly close all TCP sockets after tunnel up
- Don’t forcibly disconnect if currently connected node is missing from the server list
- Language detection defaults to English instead of Arabic
- Reinstall/enable WAN miniport adapters if missing/disabled
- Adjusted DPI to work with multiple scale factors
Other Changes:
- Added “Disconnecting” state
- Eliminated redundant API calls
- Reduced the server ping frequency
- Updated OpenVPN binaries to latest version
- Don't auto-enable the firewall (in Automatic mode) on computer start up if auto-connect is false
- Simplified installer flow + additional “custom install” options
- Async DNS resolver
- Adjusted node selection algorithm to favor lower latency nodes
- Forcibly expand certain locations when the country name is clicked
- Detect if LAN range is RFC-1918 complaint
To-do list for next version:
- CLI interface
- Favorite locations
- Dedicated IP support
- IKEv2 connectivity test
- SOCKS5 server UDP associate support
- Fix startup error on multi-user computers
- Mystery feature 1
- Mystery feature 2
Windscribe 1.80
New features:
- LAN proxy gateway
- Secure Hotspot (Experimental)
- Variable location drawer height
- Auto login after signup
- Ability to choose NDIS5 TAP driver
- Upgrade to OpenVPN 2.4.x with 2.3.x fallback
- Service notifications
- Show Pro data-centers to free users
- Location latency tool-tips added to signal bars
Fixed bugs:
- Always on firewall not working on OS boot on some machines
- Application crashes after connection attempts are exceeded with “minimize to tray” option checked
- Application freeze with firewall ON requires reboot
- API calls not made if app starts with no Internet connectivity
- Custom installation now allows for non-standard install path
- Auto-enable disabled TAP adapter
- 100% CPU when app starts with no Internet connectivity
- Don’t try UDP protocol if system proxy is configured
- Constant application window size on variable DPI screens
- Login form DPI bug
- On multi-screen computers, tool-tips show on primary monitor
Other Changes:
- Leave firewall ON if ran out of free bandwidth to prevent IP leak
- Increase reconnect timeout from 5 min to 1 hour
- Server list source changed
- Moved server location update process to separate thread
- Only do ping tests while disconnected
- Update available UI change
- Output installed anti-virus software into debug log for troubleshooting
- Open survey on application uninstall
- Installer command line arg support
- Black and white top bar icon on MacOS
- Ping nodes in batches instead of all at the same time
- Allow for verbose OpenVPN logging via Advanced Parameters screen
- When beta channel is selected, check for updates right away
To-do list for next version:
- IKEv2 protocol support
- Emergency Connect
- Firewall whitelisting overhaul
- Command line interface
- Wakeup from hibernation fix
- Add disconnecting state
- Async DNS resolver
Windscribe 1.70
- Added city level location selection
- Added Automatic Connection mode
- Added support for 22 languages
- Added custom TAP adapter
- Added “Ignore SSL Errors” option
- Added notifications when firewall is ON and application not connected
- Added “Advanced Parameters” screen
- Added EULA to the installer
- Added IPv6 connectivity disable button, to prevent WebRTC leaks over IPv6 in some situations
- Added Touch support
- Added Beta channel
- Fixed auto-start bug on some systems
- Fixed Internet connectivity check
- Fixed persistent session storage
- Fixed API connectivity on restrictive networks
- Fixed unquoted service path
- Fixed disappearing Best Location
- Fixed WSD port connectivity while firewall is ON
- Fixed PlayStation UPNP connectivity while firewall is ON
- Fixed reconnection bug on computer wake up on some systems
- Changed the Preferences screens
- Changed the connecting spinner animation
Windscribe 1.61
- Added ability to select connection port
- Added LAN proxy support
- Added speed ratings
- Added ability to add openvpn params externally
- Added using custom DNS while disconnected to prevent DNS poisoning
- Added custom API resolution field to combat advanced DNS poisoning
- Added “Best Location” to the location list
- Added connection testing after tunnel initiation
- Added tooltip for “no p2p” icon
- Fixed crashing in macOS Sierra
- Fixed LAN traffic bypass to work with UPnP devices
- Fixed debug log sender
- Fixed backup API usage logic
- Fixed CPU and energy usage
- Fixed multiple accounts info message
- Fixed multi-monitor menu placement in macOS
- Fixed Windows taskbar icon in collapsed mode
- Enable Base Filtering Engine if its disabled in Windows 7
- Changed openvpn config location to a permanent one
- Changed server list scrollbar to be more visible
- Changed XPC to sockets in macOS
- Changed TAP adapter metric on Windows 10
- Various stability fixes
更新時間：2017-10-20
更新細節：
What's new in this version:
Windscribe 1.80
New features:
- LAN proxy gateway
- Secure Hotspot (Experimental)
- Variable location drawer height
- Auto login after signup
- Ability to choose NDIS5 TAP driver
- Upgrade to OpenVPN 2.4.x with 2.3.x fallback
- Service notifications
- Show Pro data-centers to free users
- Location latency tool-tips added to signal bars
Fixed bugs:
- Always on firewall not working on OS boot on some machines
- Application crashes after connection attempts are exceeded with “minimize to tray” option checked
- Application freeze with firewall ON requires reboot
- API calls not made if app starts with no Internet connectivity
- Custom installation now allows for non-standard install path
- Auto-enable disabled TAP adapter
- 100% CPU when app starts with no Internet connectivity
- Don’t try UDP protocol if system proxy is configured
- Constant application window size on variable DPI screens
- Login form DPI bug
- On multi-screen computers, tool-tips show on primary monitor
Other Changes:
- Leave firewall ON if ran out of free bandwidth to prevent IP leak
- Increase reconnect timeout from 5 min to 1 hour
- Server list source changed
- Moved server location update process to separate thread
- Only do ping tests while disconnected
- Update available UI change
- Output installed anti-virus software into debug log for troubleshooting
- Open survey on application uninstall
- Installer command line arg support
- Black and white top bar icon on MacOS
- Ping nodes in batches instead of all at the same time
- Allow for verbose OpenVPN logging via Advanced Parameters screen
- When beta channel is selected, check for updates right away
To-do list for next version:
- IKEv2 protocol support
- Emergency Connect
- Firewall whitelisting overhaul
- Command line interface
- Wakeup from hibernation fix
- Add disconnecting state
- Async DNS resolver
Windscribe 1.70
- Added city level location selection
- Added Automatic Connection mode
- Added support for 22 languages
- Added custom TAP adapter
- Added “Ignore SSL Errors” option
- Added notifications when firewall is ON and application not connected
- Added “Advanced Parameters” screen
- Added EULA to the installer
- Added IPv6 connectivity disable button, to prevent WebRTC leaks over IPv6 in some situations
- Added Touch support
- Added Beta channel
- Fixed auto-start bug on some systems
- Fixed Internet connectivity check
- Fixed persistent session storage
- Fixed API connectivity on restrictive networks
- Fixed unquoted service path
- Fixed disappearing Best Location
- Fixed WSD port connectivity while firewall is ON
- Fixed PlayStation UPNP connectivity while firewall is ON
- Fixed reconnection bug on computer wake up on some systems
- Changed the Preferences screens
- Changed the connecting spinner animation
Windscribe 1.61
- Added ability to select connection port
- Added LAN proxy support
- Added speed ratings
- Added ability to add openvpn params externally
- Added using custom DNS while disconnected to prevent DNS poisoning
- Added custom API resolution field to combat advanced DNS poisoning
- Added “Best Location” to the location list
- Added connection testing after tunnel initiation
- Added tooltip for “no p2p” icon
- Fixed crashing in macOS Sierra
- Fixed LAN traffic bypass to work with UPnP devices
- Fixed debug log sender
- Fixed backup API usage logic
- Fixed CPU and energy usage
- Fixed multiple accounts info message
- Fixed multi-monitor menu placement in macOS
- Fixed Windows taskbar icon in collapsed mode
- Enable Base Filtering Engine if its disabled in Windows 7
- Changed openvpn config location to a permanent one
- Changed server list scrollbar to be more visible
- Changed XPC to sockets in macOS
- Changed TAP adapter metric on Windows 10
- Various stability fixes