VueScan 歷史版本列表 Page41

更新時間：2020-03-21
更新細節：

What's new in this version:

- fixed export to html regressions after 0.39.0
- fixed RuntimeError: returned character can not be represented in 16-bit unicode”
- fixed problem with opening another note
- show node path in tooltip of Last Visited Nodes
- triple click functionality to select paragraph limited to rich text as not ideal in particular for for code

更新時間：2020-03-19
更新細節：

更新時間：2020-03-15
更新細節：

更新時間：2020-03-09
更新細節：

What's new in this version:

PerformanceTest 10.0 Build 1002
- CPU tests, Single Threaded, started scaling single threaded score down to be closer to PT9 for better comparability with older results
- 2D Tests, 2D Image Rendering, changed score displayed to thousand images/sec instead of images/sec for better readability
- Fixed drag and drop on main window of loading of baselines not working
- Fixed an issue for the test status window, when running a single CPU test it was not correctly displaying the test that was running


PerformanceTest 10.0 Build 1001
- Change log not available for this version


PerformanceTest 10.0 Build 1000
- Score rebalancing Due to the large amount of changes made to the 2D/3D/CPU/Disk tests all the calculated mark values have been rebalanced and scaled to be similar (but not exactly the same) to that of PerformanceTest 9
- Individual test scores have not been scaled so a direct comparison cannot be made in many cases between version 9 and version 10
- Windows Support No longer supporting Windows versions older than Vista
- Compiler updates We have switched from using Visual Studio 2013 (for V9) to Visual Studio 2019 for V10. Newer compiler versions typically bring improved code optimisation and use of newer CPU instructions
- CPU Tests Enabled compiler optimisations for the CPU tests that had previously been disabled. This has resulted in better performance on newer CPUs when compared to older ones
- Compression Test, replace with a new version that uses the Cypto++ Gzip library. Previous versions of PerformanceTest were using a Adaptive encoding algorithm, which gave good compression rates on text, but was’t in common use. Zip is the defacto standard for real world data compression
- Encryption test, removed Salsa and TwoFish from the sub tests that are run and replaced them with an ECDSA (Elliptic Curve Digital Signature Algorithm) sub test. Previously PerformanceTest V9 had 4 sub-tests. These were, TwoFish, AES, Salsa20 & SHA256. Now we have three sub-tests. AES, ECDSA & SHA256. These are all algorithms that are heavily used in the real world
- Extended Instructions (SSE), added an AVX512 test (when available). AVX512 are a new set of CPU instructions that are in newer CPUs
- Extended Instructions (SSE), fixed a pointer math issue in the test that was referencing incorrect memory locations. Accessing the correct data helped with data alignment and improved test throughput
- Extended Instructions (SSE), made some changes to the SSE/AVX/FMA tests for how the results are retrieved and stored for next calculation loop (using _mm_storeu_ps and mm256_storeu_ps)
- Extended Instructions (SSE), removed custom aligned vector/matrix class and switched to standard vector/matrix class. Changed how matrix data is loaded before test (using _mm256_broadcast_ps)
- Integer Math, made some changes to add better support for out of order execution. This makes the algorithm less linear and gives modern CPUs the change to get more calculations done in parallel
- Added a Cross-platform mark to the CPU test, made up of the Integer, Floating point, sorting and prime test scores. This will be calculated when loading a V9 baseline in V10 if the required scores are available. This cross platform score is not used when generating the overall CPU mark as it based on previously run tests. We envisage that we’ll use these results in the future for cross platform comparisons (x86 PCs vs ARM based mobile devices)
- Physics test, updated Bullet physics engine to version 2.88. Previously we were using 2.83
- 2D Tests Added a new SVG (Scalable Vector Graphics) image rendering test that will open and display several SVG images
- Added a new “PDF Render” test that will open a PDF and scroll through the available pages
- Changed default test size to 1920 x 1080. This should place more load on the video card than was previously the case so frame rates are lower across the board compared to V9. Tests will scale down in size to 1024×768 and a penalty will be applied and will not run at lower resolutions than this
- Direct 2D, increased amount of objects displayed during test
- Windows Interface test, increased size of dialog and number of controls on dialog
- Complex vectors, changed so that rendering loop resets sooner rather than most of the drawing happening off screen towards the end of the test
- Image Filters and Image Rendering, added DX11 versions of this test. Results are a combination of old and new tests
- Due to these updates scores and the 2D mark value in older versions of Windows (eg Windows 7) will be far lower as it isn’t possible to scale meaningfully when multiple tests can’t be run
- 3D Tests DX9, changed default resolution to 1920×1080, test will be scaled down and a penalty applied if it cannot be run at this resolution
- DX9, increased default Anti Aliasing level to 8, changed skybox and number of objects in scene. This was done with the aim of making the test less CPU bound
- DX10, increased default resolution to 1920×1080, test will be scaled down and a penalty applied if it cannot be run at this resolution. This adds load to the video card
- DX10, increased number of islands and meteors during test
- DX10, fixed a bug when enumerating display modes for the DX10 test where no compatible card would be found if there was a large amount (>500) of display modes
- GPU Compute, replaced the Bittonic sort test with an NBody Gravity test. Nobody knew what a Bittonic sort was or how it applied to the real world. NBody simulations on the other hand are a fairly common scientific application and they make a good visual impact
- GPU Compute, increased default size for sub tests to 1920×1080
- GPU Compute, OpenCL test, made some changes to particle size and variables used for calculations so more is happening during the test
- GPU Compute, Mandelbrot test, increased number of iterations 10x to slow down the test execution
- Started allowing ”Microsoft RemoteFX Graphics Device” for 3D support on some VMs
- Memory Tests Increased amount of memory that non-cached tests use to 512MB of RAM (up from 256MB)
- Database Operations, changed to use an in memory sqlite3 database based on SQLite 3.31.1. Will run for maximum available physical cores and use at least 128MB RAM per thread
- Threaded, changed to run a range of threads up the maximum available (eg 2, 4, 8, 16 or 3, 6, 12 depending on available core count) and use highest score. Amount of RAM used will depend on number of threads, <= 16 threads 512 MB, <=64 threads 1 GB, > 64 threads 2 GB
- Threaded and Database operations, added support for processor groups and thread affinity
- Latency test, now will take measurements based on 16KB, 64KB and 8MB ranges (previously was just 64KB) and use the average value of the three tests for the score. This will give a broader range of samples and will result in higher latency figures than PT9
- Disk tests Changed name of “Random Seek” test to “32KQD20” to better represent the test (using 32K block size with a queue depth of 20)
- Added a new “4KQD1” test (using 4k block size with a queue depth of 1)
- Increased test files size to 400MB for write test, 800MB for read test (traditional hard drive). If drive is an SSD then it is 1GB for write test and 2GB for read test
- Removed the CD test
- Advanced Physics Test Added option to allow resolution to be selected
- Updated Bullet physics engine to version 2.88. Previously was using 2.83
- Added message check on exit to stop „not responding“ when closing while using a large number of objects
- Advanced Network Test Added threading, Windows RIO (Registered Input/Output API Extensions) sockets option. These changes were made to achieve higher throughput & lower latency, particularly on 10Gb+ networks. You should now be able to really push the limits of your networking gear with these changes
- Advanced Disk Test Made some changes to try and stop crashes during the advanced disk IOPS test when the hard drive is failing/responding abnormally
- Added temperature collection to test results. Can now choose to display the temperature or the latency heat map when displaying a graph. This has become important as some SSDs throttle down their speed under high temperatures
- Advanced Memory Test
- Added „Threaded“ test option to advanced memory test, currently will run the threaded memory test starting with 1 thread up to (Cores * Threads per core) threads. Each test loop is repeated 3 times and the best result stored.Now opens graph automatically at end of testing
- Updated latency test to use same settings as standard test, running random range latency test for 16KB, 64Kb and 8MB ranges and then averaging the results
- NEW Advanced CPU Test Added an advanced CPU test, this allows individual CPU tests to be run from 1 thread up to a specified number of threads and then the results graphed
- NEW Advanced Internet Speed test Added an implementation of M-Labs (https://www.measurementlab.net) internet speed test that will connect to their servers, performance a 10 second upload test, a 10 second download test and then display the results from that test
- Baseline management Re-enabled choosing of colours for loaded baselines, this will only affect the bar graph colour of the baseline and the text colour will not change
- Localisation Added a section in the installer to allow selection of a supported language, on install first launch PT will now choose that language by default
- Reporting Added percentile options to exported text, formatted text and HTML reports
- Baseline Management Added a way of tracking submitted baselines and displaying them in the advanced baseline management dialog under the “Uploaded” tab
- Scripting Added SETRERUNRESULT to toggle re-run config setting. Choose between keeping BEST and NEW result when re running tests
- Added HIDEBASELINES option to only add current computer results to exported results files
- Added CPU_RUNTEST and ACPU_SETEXPORT commands for scripting the advanced CPU test
- Changed „Result Date“ to be local time instead of UTC for consistency (windows install time was already local time)
- HTML report output, fixed a bug where the Unicode BOM was not being correctly written to the start of the file if the file was opened in append mode and didn’t already exist
- Removed 2 extra line breaks being added at end of records for REPORTSUMMARYCSV command
- Misc Chart display, added percentage difference to baselines when a score the „this computer“ is available. Also added option in the preferences to enable/disable
- Fixed an incorrect error message in the advanced drive performance test when a selected disk did not have enough free space
- Fixed a bug when saving results to an image, the scrollbar width was being applied and causing some result to be hidden
- Added a gray rectangle to custom list view header so the boundary that can be used to resize the columns is highlighted
- System information, Changed ram details in baseline system info to display in GB
- Now displaying „Baseline #X“ instead of just „#X“ on system information window for loaded baselines
- Report exports, added BIOS version and hard drive size as a separate field to the exported report system information
- User Interface, Made back/prev/next buttons in 3D component info view slightly lighter so they stand out more
- No longer displaying PNP ID on Video card system info display
- Fixed some preferences dialog alignments
- CSV export, fixed an issue where multiple „unknown disk“ entries could be output and change column ordering


PerformanceTest 9.0 Build 1035
- Fixed a crash at startup on some systems when collecting SMBIOS system information


PerformanceTest 9.0 Build 1034
- Fixed some display issues when collecting system information for graphics cards:
- on systems with integrated & discrete cards in some cases multiple entries were displayed
- monitors were not assigned to the correct video card
- some Nvidia cards were not being saved in the baseline correctly


PerformanceTest 9.0 Build 1033
- Fixed a crash on startup when collecting graphics system infromation


PerformanceTest 9.0 Build 1032
- Fixed an issue when trying to print in windows 10
- Fixed a crash on start up that could occur on Intel Baytrail systems due to an invalid MSR read
- Made some changes to try and stop crashes during the advanced disk IOPS test when the hard drive is failing/responding abnormally
- Fixed a bug with the save results as image function being impacted by the scroll bar on normal graph displays (would only save as many results as were displayed)
- Added more information to "Could not reset the Direct3D device" error


PerformanceTest 9.0 Build 1031
- Baseline management: added max cpu/3d/disk scores to advanced baseline search windows. Will now force a min and max score entry (with a differnence no larger than 1000) when doing a search based only on a cpu/3d/disk score.
- Removed Nvidia G-Sync check before submitting baseline results as the Nvidia API was not reliable and could indicate G-Sync was enabled on systems that did not support it
- Fixed a bug in the DX12 test where it would not always choose the video card with the largest amount of RAM


PerformanceTest 9.0 Build 1030
- System information library updated to support Radeon RX 590, support for retrieving CPU info for Intel Goldmont


PerformanceTest 9.0 Build 1029
- Fixed a crash that could occur during the disk test


PerformanceTest 9.0 Build 1028
- Fixed a bug when enumerating display modes for the DX10 test where no compatible card would be found if there was a large amount (>500) of display modes
- Updated temperature offsets for some AMD Ryzen CPUs to make the temperatures more accurate


PerformanceTest 9.0 Build 1027
- Updated system information library to fix a crash that could occur on Windows 10 Enterprise with device guard enabled on some AMD systems


PerformanceTest 9.0 Build 1026
- Fixed a crash that could occur in the Advanced Disk Drive Performance test when a call to get the drive information failed
- Changed advanced memory test to allocate up to 25% of system ram (previously would limit to 2GB)
- Fixed a crash that could occur when adding a large amount of baselines at once using the baseline management window


PerformanceTest 9.0 Build 1025
Fixed an issue with NUMA settings when selecting a processor using a different node to the one the PerformanceTest EXE was running on
Fixed a crash that could occur at startup due to a buffer overflow when downloading updated chart data


PerformanceTest 9.0 Build 1024
- Made a change so that the high powered card on dual graphics card systems is displayed in the "your card vs" comparisons
- Advanced Drive Test, fixed freeze bug when filesize is larger than the maximum allowed per the drive's filesystem.
- Advanced Drive Test, Widen the rows on the table and updated displayed precision for Latency Read/Write tests (will show microseconds, us, instead of ms where applicable). This is important when benchmarking very low latency RAM drives.
- Advanced Drive Test, Improved test consistency. Previously the creation of the test file and the the actual test period could overlap on some disk systems due to caching. This could cause a slow start to the test. If a drive respects caching directives this shoould no longer happen.
- Fixed openCL test crashing/not displaying an error message when no openCL library is available
- Added monitor DPI to baseline information
- Updated system information library to correctly report details about new hardware


PerformanceTest 9.0 Build 1023
- Made some changes so test scores greater than 0 but less than 1 are rounded up to 1 when displayed (to avoid them showing as 0)
- Added a new example baselines to reflect newer hardware on the market
- Started displaying text scaling factor / DPI settings in the with video card information. The DPI setting can impact the 2D results (more pixels to move around means slower 2D at high DPI)


PerformanceTest 9.0 Build 1022
- Fixed a crash that could occur when exporting a test graph (eg advanced memory test) to an image
- Fixed a bug in the Advanced memory test where NUMA settings were not being taken into account for memory latency and block size testing
- Fixed a crash that could occur in the memory latency test


PerformanceTest 9.0 Build 1021
- Fixed the naming of some AMD RX 560 cards when they share the same device ID as the RX 460
- Updated help to a new format to allow opening and display of current topic on Win10 systems


PerformanceTest 9.0 Build 1020
- Added a 64bit build of the DX12 test executable which will be launched on 64bit systems

更新時間：2020-03-09
更新細節：

更新時間：2020-03-09
更新細節：

What's new in this version:

VueScan 9.7.25 (64-bit)
- After document feeder PDF scans, opens view of folder instad of file
- Added support for TIFF and DNG files between 2 GBytes and 4 GBytes
- Fixed problem with Brother MFC-260C


VueScan 9.7.24 (64-bit)
Released a32 and a64 versions for ARM Linux:
- Raspberry Pi 2 (32-bit only)
- Raspberry Pi 3 (32-bit and 64-bit)
- Raspberry Pi 4 (32-bit and 64-bit)

- Fixed problem with Canon DR-3080CII


VueScan 9.7.23 (64-bit)
- Fixed problem with Canon LiDE 120
- Fixed problem with Fujitsu fi-7260 and fi-7280
- Added support for Fujitsu fi-800R

Added support for Canon MF260 series:
- MF264dw
- MF267dw
- MF269dw


VueScan 9.7.22 (64-bit)
Improved support for some Genesys Logic scanners:
- Canon 4400F (flatbed up to 600 dpi)
- Canon 8400F
- Canon 8600F
- Canon LiDE 50
- Canon LiDE 60
- Canon LiDE 80
- Canon LiDE 100
- Canon LiDE 110
- Canon LiDE 120
- Canon LiDE 200
- Canon LiDE 210
- Canon LiDE 220
- Plustek OpticFilm 7200i
- Plustek OpticFilm 7300
- Plustek OpticFilm 7500i
- HP ScanJet 2300c
- HP ScanJet 4850 (flatbed up to 400 dpi)

- Improved Polish translation


VueScan 9.7.21 (64-bit)
- Fixed problem with HP LaserJet MFP M426
- Fixed problem with button polling and some Epson scanners
- Fixed problem with PIE PrimeFilm 7250 Pro3 and Reflecta RPS 7200
- Fixed problem with Brother MFC-L2740DW
- Fixed problems with some Fujitsu scanners
- Added support for turning off lamp with some Avision scanners


VueScan 9.7.20 (64-bit)
Added support for 11 new Brother MFPs:
- DCP-J981N
- DCP-J982N
- DCP-T310
- DCP-T510W
- DCP-T710W
- DCP-T810W
- DCP-T910DW
- MFC-J1605DN
- MFC-J903N
- MFC-J998DN
- MFC-T4500DW

- Fixed problem with some PIE/Reflecta scanners


VueScan 9.7.19 (64-bit)
Added support for 112 new Canon MFPs:
- E3300
- E3340
- E3370
- E3390
- E3391
- E4200
- E4210
- E4240
- E4270
- E4280
- E4290
- G6000
- G6010
- G6011
- G6020
- G6030
- G6040
- G6050
- G6060
- G6065
- G6070
- G6080
- G6090
- G6091
- G6092
- G7000
- G7010
- G7011
- G7020
- G7030
- G7040
- G7050
- G7060
- G7065
- G7070
- G7090
- G7091
- G7092
- GM4000
- GM4010
- GM4011
- GM4030
- GM4040
- GM4050
- GM4070
- GM4090
- GM4092
- TR9530
- TS3300
- TS3310
- TS3320
- TS3322
- TS3325
- TS3327
- TS3329
- TS3340
- TS3350
- TS3351
- TS3352
- TS3355
- TS3360
- TS3365
- TS3370
- TS5300
- TS5320
- TS5330
- TS5340
- TS5350
- TS5351
- TS5352
- TS5353
- TS5360
- TS5365
- TS5370
- TS5380
- TS5390
- TS5391
- TS5392
- TS6230
- TS6280
- TS6300
- TS6320
- TS6330
- TS6340
- TS6350
- TS6351
- TS6360
- TS6365
- TS6370
- TS6380
- TS6390
- TS6391
- TS6392
- TS7330
- TS8230
- TS8280
- TS8300
- TS8320
- TS8330
- TS8340
- TS8350
- TS8351
- TS8352
- TS8360
- TS8370
- TS8380
- TS8390
- TS8391
- TS8392
- TS9580
- XK60
- XK80


VueScan 9.7.18 (64-bit)
- If 'Output | Auto file name' is off, always ask for file name
- Improved .rpm file for Red Hat Linux


VueScan 9.7.17 (64-bit)
Added support for new Canon scanners:
- iR1643
- MF440
- MF540
- MF641
- MF642
- MF643
- MF644
- MF645
- MF741
- MF742
- MF743
- MF744
- MF745
- MF746
- WG7140
- WG7150
- WG7240
- WG7250
- WG7440
- WG7450
- WG7540
- WG7550
- WG7740
- WG7750
- WG7840
- WG7850
- WG7940
- WG7950


VueScan 9.7.16 (64-bit)
- Fixed problems with some Genesys Logic scanners
- Canon 4400F (flatbed up to 600 dpi)
- Canon 8400F
- Canon 8600F
- Canon LiDE 50
- Canon LiDE 60
- Canon LiDE 80
- Canon LiDE 100
- Canon LiDE 110
- Canon LiDE 120
- Canon LiDE 200
- Canon LiDE 210
- Canon LiDE 220
- Plustek OpticFilm 7200i
- Plustek OpticFilm 7300
- Plustek OpticFilm 7500i
- HP ScanJet 2300c
- HP ScanJet 4850 (flatbed up to 400 dpi)
- Added support for Canon DR-850M
- Added support for in-scanner auto skew with some Epson scanners
- Fixed problem with some Brother document scanners


VueScan 9.7.15 (64-bit)
- Reduced size of JPEG files 10% (optimization of entropy coding)
- Reduced size of color text files (JPEG and PDF)
- Support batch scanning mix of 8.5x11, 8.5x14 and 8.5x17 media sizes
- Fixed problem with some newer and Reflecta scanners


VueScan 9.7.14 (64-bit)
- Fixed problem with plugging/unplugging USB scanners
- Fixed problem with 'Scanner | Find scanners' command
- Fixed problem with 'Input | Media size' set to 'Auto'
- Added support for Plustek OpticFilm 135i on Windows and Mac OS X


VueScan 9.7.13 (64-bit)
- Added support for inexpensive video film scanners on Mac OS X
- Fixed problem with some Avision scanners
- Added support for Plustek OpticBook 3800L
- Added support for document feeder on Fujitsu M4097
- Several small bug fixes


VueScan 9.7.12 (64-bit)
Added support for plugging/unplugging USB scanners while running:
- Recovers from computer sleeping and waking

Added 'Scanners | Find scanners' command:
- Searches local networks for WiFi and ethernet scanners
- Searches for attached Firewire and SCSI scanners


VueScan 9.7.11 (64-bit)
- Significantly improved scan speed of many Brother scanners


VueScan 9.7.10 (64-bit)
- Improved scan quality with older Fujitsu ScanSnap scanners: S500, S500M, S510, S510M, S1500
- Improved scan quality with older Fujitsu fi-series scanners
- Fixed problem with 'Color | Brightness' with document scanners


VueScan 9.7.09 (64-bit)
- Fixed problem with some Brother printer/scanner/copiers
- Fixed problem with some Epson document scanners

Improved scan quality with 6 Fujitsu ScanSnap scanners:
- S300
- S300M
- S1100
- S1100i
- S1300
- S1300i


VueScan 9.7.08 (64-bit)
- Added support for setting 'Input | Media size' to 'Custom'
- Added support for Brother MFC-J775DW
- Fixed problems with macOS 10.15 (Catalina)
- Fixed problem with Canon 4400F
- Fixed problem with Brother DCP-L2535DW
- Fixed problem with 'Input | Batch list' not appearing
- Fixed problem with 'Color | White point (%)'


VueScan 9.7.07 (64-bit)
- Faster scanning with some document scanners
- Fixed problem with some document scanners
- Fixed problem with 'Output | PDF multi page' set to 'Front/Back'
- Fixed problem with duplex scans with Samsung CLX-6260
- Reduced JPEG artifacts with some document scanners
- Faster startup when USB scanner being used by another program


VueScan 9.7.06 (64-bit)
New:
- Faster scanning with high-speed document scanners
- Solved problems with some Genesys Logic scanners


(Overlaps scanning with saving to disk):
- Fujitsu document scanners
- Canon DR-series document scanners
- Epson DS-series document scanners
- Newer HP document scanners
- Samsung document scanners
- Kyocera and other office document scanners


VueScan 9.7.05 (64-bit)
- Faster scanning with Genesys Logic scanners (remembers calibration)
- Preliminary support for transparency scans with Genesys Logic


VueScan 9.7.04 (64-bit)
- Fixed problem with some Genesys Logic scanners
- Added support for Brother MFC-L2685DW


VueScan 9.7.03 (64-bit)
Added support for 6 new Canon DR-series document scanners:
- DR-C230
- DR-C340
- DR-M260
- DR-G2090
- DR-G2110
- DR-G2140


VueScan 9.7.02 (64-bit)
- Improved support for sliders in B/W histogram
- Fixed problem with Fujitsu S500 and S500M
- Fixed problems with some Samsung scanners when awoken from sleep
- Fixed assorted small problems


VueScan 9.7.01 (64-bit)
Improved built-in drivers for some genesys logic scanners:
- Canon 8400F (no infrared yet)
- Canon 8600F (no infrared yet)
- Plustek OpticFilm 7200i (preliminary)
- Other OpticFilm scanners will be supported in the next months


VueScan 9.6.47 (64-bit)
- Improved support for loading .ini files from function keys
- (Files are assigned to function keys in alphabetical order)
- Fixed problem with crop box sometimes rotating unexpectedly
- Fixed problem with some AirPrint/Scan (eSCL) scanners


VueScan 9.6.46 (64-bit)
- Added support for Extended Edition
- Raw file name now also appears in Input tab
- Enabled all color space options in trial version


VueScan 9.6.45 (64-bit)
- Added support for 46 new Epson scanners: EC-4020, EC-4030, EC-4040, ES-60WB, ES-60WW, ET-2720, ET-2760, ET-3710, ET-3760, ET-4700, ET-4760, ET-M2140, ET-M2170, ET-M3140, ET-M3170, ET-M3180, L3100, L3160, L364, L382, L5190, L7160, L7180, PX-M270FT, PX-M270T, PX-M7110F, PX-M7110FP, PX-M880FX, PX-M885F, ST-2000, ST-3000, ST-4000, ST-M3000, WF-2810, WF-2830, WF-2850, WF-3730, WF-C579R, WF-C579RB, WF-C8610, WF-C8690B, WF-M20590, XP-2100, XP-4100, XP-6100, XP-7100


VueScan 9.6.44 (64-bit)
Added support for 34 new HP scanners:
- Color LaserJet Pro MFP M478fcdn
- Color LaserJet Pro MFP M478fcdw
- Color LaserJet Pro MFP M479dw
- Color LaserJet Pro MFP M479fcdn
- Color LaserJet Pro MFP M479fcdw
- Color LaserJet Pro MFP M479fdn
- Color LaserJet Pro MFP M479fdw
- Color LaserJet Pro MFP M479fnw
- Laser NS MFP 1005
- Laser NS MFP 1005w
- LaserJet Enterprise Flow MFP M528c
- LaserJet Enterprise Flow MFP M528z
- LaserJet Enterprise MFP M528dn
- LaserJet Enterprise MFP M528f
- LaserJet Managed Flow MFP E52645c
- LaserJet Managed MFP E52645dn
- LaserJet Pro MFP M329dn
- LaserJet Pro MFP M329dw
- LaserJet Pro MFP M428c1
- LaserJet Pro MFP M428c2
- LaserJet Pro MFP M428c3
- LaserJet Pro MFP M428c4
- LaserJet Pro MFP M428dw
- LaserJet Pro MFP M428fdn
- LaserJet Pro MFP M428fdw
- LaserJet Pro MFP M428m
- LaserJet Pro MFP M429dw
- LaserJet Pro MFP M429fdn
- LaserJet Pro MFP M429fdw
- Neverstop Laser MFP 1200a
- Neverstop Laser MFP 1200w
- Smart Tank 500 series
- Smart Tank 530 series
- Smart Tank Plus 570 series

- Fixed problem with some Samsung document feeders
- Improved color scans on flatbeds and document feeders


VueScan 9.6.43 (64-bit)
- Fixed problem with some network scanners (hang on startup) (some HP Laserjet scanners, also AirPrint scanners)


VueScan 9.6.42 (64-bit)
-Improved responsiveness with many document feeders (most Epson and HP scanners, also AirPrint scanners)


VueScan 9.6.41 (64-bit)
- Change log not available for this version


VueScan 9.6.40 (64-bit)
Added support for 25 new HP scanners:
- Officejet 8010
- Officejet 8020
- Officejet 9010
- Officejet Pro 8020
- Officejet Pro 8030
- Officejet Pro 9010
- Officejet Pro 9020
- Smart Tank 510
- Smart Tank 610
- Smart Tank Plus 550
- Smart Tank Plus 650
- Color LaserJet Managed Flow MFP E67660z
- Color LaserJet Managed MFP E67650dh
- Color LaserJet Managed MFP E77422a
- Color LaserJet Managed MFP E77422dn
- Color LaserJet Managed MFP E77422dv
- Color LaserJet Managed MFP E77428dn
- LaserJet Managed Flow MFP E62675z
- LaserJet Managed MFP E62655dn
- LaserJet Managed MFP E62665hs
- LaserJet Managed MFP E62665hs
- LaserJet MFP E72425a
- LaserJet MFP E72425dn
- LaserJet MFP E72425dv
- LaserJet MFP E72430dn


VueScan 9.6.39 (64-bit)
Added full support for 42 PIE/Reflecta film scanners:
- Braun FilmScan 120
- Kodak RFS 3600
- PIE ColorScan 3600
- PIE NatureScan
- PIE PowerFilm
- PIE PowerSlide 3600
- PIE PowerSlide 3650
- PIE PowerSlide 5000
- PIE PowerSlide X
- PIE PrimeFilm 120
- PIE PrimeFilm 120 Pro
- PIE PrimeFilm 1800 LAB
- PIE PrimeFilm 3600 Pro
- PIE PrimeFilm 3610 AFL
- PIE PrimeFilm 3650 LAB
- PIE PrimeFilm 3650 Pro3
- PIE PrimeFilm 3650U
- PIE PrimeFilm 7200
- PIE PrimeFilm 7250 Pro3
- PIE PrimeFilm 7250U
- PIE PrimeFilm X
- PIE PrimeFilm XA
- PIE PrimeFilm XAs
- PIE PrimeFilm XE
- PIE PrimeFilm XEs
- PIE PrimeHisto XE
- Reflecta CrystalScan 3600
- Reflecta CrystalScan 7200
- Reflecta DigitDia 3600
- Reflecta DigitDia 4000
- Reflecta DigitDia 5000
- Reflecta DigitDia 6000
- Reflecta DigitDia 7000
- Reflecta MF 5000
- Reflecta ProScan 10T
- Reflecta ProScan 3600
- Reflecta ProScan 4000
- Reflecta ProScan 7200
- Reflecta RPS 10M
- Reflecta RPS 3600
- Reflecta RPS 7200
- Uniscan FS120ICE
- All scanners work on Windows, Windows ARM, Mac OS X and Linux
- Full support for 6400 dpi, 7200 dpi and 10000 dpi scans
- Negative scans are faster
- Preview scans are faster
- Gray scans are faster
- Auto focus is more accurate (done with 16 bits instead of 8 bits)
- Multi sampling is improved
- Multi exposure is improved
- Multi sampling and multi exposure can be combined
- Scanning is often quieter
- Adds support for much longer exposure times (i.e. histology samples)
- No need to install CyberView X
- Supports older PIE scanners on all operating systems
- Used scanners can often be purchased on ebay.com for less than $200
- These scanners are now comparable to Nikon CoolScan scanners


VueScan 9.6.38 (64-bit)

- Improved support for PIE and Reflecta film scanners without CyberView X
- Fixed problem with some Epson document scanners

Added support for 8 new Epson scanners:
- DS-70
- DS-80W
- DS-870
- DS-970
- ES-50
- ES-55R
- ES-60W
- ES-65WR


VueScan 9.6.37 (64-bit)
- Improved support for many Brother scanners
- Improved support for PIE and Reflecta scanners without CyberView X


VueScan 9.6.36 (64-bit)
- Improved scan speed when 'Input | Media size' is 'Auto'
- Improved recognition when 'Input | Media' is set to 'Auto'
- Added support for Xerox Patriot D40 document scanner
- Fixed assorted small problems
- Added preliminary support for PIE and Reflecta scanners without CyberView


VueScan 9.6.35 (64-bit)

- Improved automatic media size detection
- Fixed problem with some Epson DS-series scanners
- Double-click with right mouse button sets color balance to default
- Fixed assorted small problems

Improved 'Input | Media' set to 'Color text':
- Produces much smaller JPEG, PDF and TIFF files
- Reduces visibility of wrinkles in paper
- Detected when 'Input | Media' set to 'Auto'


VueScan 9.6.34 (64-bit)
- Improved automatic cropping
- Improved automatic media detection
- Fixed problem with 'Prefs | Beep when done'
- Improved support for AirPrint/Scan (eSCL) scanners
- Improved support for some HP scanners
- Fixed problem with some Epson DS-series scanners and Fine mode
- Fixed problem with AVision AW-210


VueScan 9.6.33 (64-bit)
- Improved automatic cropping
- Improved cropping with black scanner lid
- Improved support for Epson DS-series scanners
- Improved support for some HP printer/scanner/copiers
- Fixed problem on Linux after running VueScan two times


VueScan 9.6.32 (64-bit)
- Improved automatic cropping
- Improved automatic media detection
- Fixed problem with Canon DR-M140 color


VueScan 9.6.31 (64-bit)
- Faster scan speed on flatbed and document feeder
- Improved automatic media detection


VueScan 9.6.30 (64-bit)
Improved support for automatic media size detection:
- More accurate automatic cropping on flatbed and feeder
- Faster scanning using flatbed with smaller images
- Stops scanning before lamp scans the whole flatbed
- Useful for photos, credit cards and other small scans
-  Works with flatbed and document feeder
- Added a few standard crop sizes, including credit cards
- Fixed problem with some Epson plugins on Linux


VueScan 9.6.29 (64-bit)

Improved support for automatic media size detection:
- Detects most type of scans
- Set 'Input | Media size' to 'Auto' to enable
- Alternatively, set 'Crop | Crop size' to 'Auto' to enable
- Works with flatbed and document feeder
- Useful for scanning photos and odd sized papers
- Fixed problem with some options forgotten if VueScan crashes


VueScan 9.6.28 (64-bit)

Added support for 44 HP printer/scanner/copiers:
- Color LaserJet Managed Flow MFP E77822z
- Color LaserJet Managed Flow MFP E77825z
- Color LaserJet Managed Flow MFP E77830z
- Color LaserJet Managed Flow MFP E87640z
- Color LaserJet Managed Flow MFP E87640z
- Color LaserJet Managed Flow MFP E87660z
- Color LaserJet Managed MFP E77822dn
- Color LaserJet Managed MFP E77830dn
- Color LaserJet Managed MFP E87640dn
- Color LaserJet Managed MFP E87650dn
- Color LaserJet Managed MFP E87660dn
- Color LaserJet Pro MFP M179fw
- Color LaserJet Pro MFP M278cw
- Color LaserJet Pro MFP M278dn
- Color LaserJet Pro MFP M278nw
- Color LaserJet Pro MFP M279fdw
- Color LaserJet Pro MFP M280c2
- Color LaserJet Pro MFP M280cnw
- Color LaserJet Pro MFP M280nw
- Color LaserJet Pro MFP M281dne
- Ink Tank 310
- Ink Tank Wireless 410
- LaserJet Managed Flow MFP E72525z
- LaserJet Managed Flow MFP E72530z
- LaserJet Managed Flow MFP E72535z
- LaserJet Managed Flow MFP E82550z
- LaserJet Pro MFP M148dw
- LaserJet Pro MFP M148fdw
- LaserJet Pro MFP M149dw
- LaserJet Pro MFP M149fdw
- LaserJet Pro MFP M28a
- LaserJet Pro MFP M28w
- LaserJet Pro MFP M29a
- LaserJet Pro MFP M29w
- LaserJet Pro MFP M30a
- LaserJet Pro MFP M30c
- LaserJet Pro MFP M30cw
- LaserJet Pro MFP M30w
- LaserJet Pro MFP M31a
- LaserJet Pro MFP M31c
- LaserJet Pro MFP M31cw
- LaserJet Pro MFP M31w
- Smart Tank 350
- Smart Tank Wireless 450

Fixed problem with some older scanners:
- HP ScanJet 3800
- HP ScanJet 3970
- HP ScanJet 4070
- HP ScanJet 4370
- HP ScanJet G2710
- HP ScanJet G3010
- HP ScanJet G3110
- UMAX Astra 4900
- BenQ 5550

- Fixed problem with some PIE and Reflecta scanners
- Fixed problem with some Brother scanners on Linux


VueScan 9.6.27 (64-bit)
- Added support for automatic media size detection
- Set 'Input | Media size' to 'Auto' to enable
- Works with flatbed and document feeder
- If scanning full pages, will crop off white areas
- Useful for scanning photos and odd sized papers
- Fixed problem with some Brother scanners
- Fixed problem with some Fujitsu scanners
- Fixed problem with some HP scanners
- Fixed problem with some Minolta scanners
- Fixed problem with Epson ET-7700 scan quality


VueScan 9.6.26 (64-bit)
- Added support for 8 Fujitsu portable scanners: fi-60F, fi-65F, ScanSnap S1100, ScanSnap S1100i, ScanSnap S1300, ScanSnap S1300i, ScanSnap S300, ScanSnap S300M
- Fixed problem with some Brother printer/scanner/copiers
- Fixed problem with some Canon LiDE scanners on Windows


VueScan 9.6.25 (64-bit)

Added support for 4 new Canon scanners:
- TR4500
- TS6200
- TS8200
- TS9500

Fixed:
- Fixed problem with some Epson printer/scanner/copiers
- Fixed problem with some HP printer/scanner/copiers
- Fixed duplex scanning with Samsung CLX-6200
- Fixed problem with Brother MFC-L2700DW


VueScan 9.6.24 (64-bit)
- Improved color with some Epson ESC/I-2 scanners
- Faster startup with some USB scanners
- Fixed problem with HP ScanJet 4400c and 4470c


VueScan 9.6.23 (64-bit)
- Improved support for AirPrint/Scan (eSCL) scanners
- Faster reaction to Cancel button on Mac OS X and Linux
- Canon LiDE 300 and LiDE 400
- Most newer HP printer/scanner/copiers
- Most newer HP document scanners
- Support for most AirPrint/Scan (eSCL) scanners over USB
- Support for future eSCL scanners without upgrading VueScan


VueScan 9.6.22 (64-bit)

- Added support for Canon LiDE 300 and LiDE 400
- Added support for Fujitsu iX1500

Added support for 29 new Brother scanners:
- DCP-9030CDN
- DCP-J572DW
- DCP-J572N
- DCP-J577N
- DCP-L3510CDW
- DCP-L3517CDW
- DCP-L3550CDW
- DCP-L3551CDW
- HL-L3290CDW
- MFC-9150CDN
- MFC-9350CDW
- MFC-J491DW
- MFC-J497DW
- MFC-J5630CDW
- MFC-J5845DW
- MFC-J5945DW
- MFC-J6545DW
- MFC-J6583CDW
- MFC-J6945DW
- MFC-J6947DW
- MFC-J6983CDW
- MFC-J6997CDW
- MFC-J6999CDW
- MFC-L3710CW
- MFC-L3730CDN
- MFC-L3735CDN
- MFC-L3745CDW
- MFC-L3750CDW
- MFC-L3770CDW


VueScan 9.6.21 (64-bit)
- Fixed problem with some PIE and Reflecta scanners on Mac OS X
- Fixed problem with some Fujitsu scanners (especially fi-4120)
- Fixed problem with some HP ScanJet document scanners
- Fixed problem with some newer AVision scanners (especially AD280F)
- Added support for "Input | Overscan" with some AVision scanners


VueScan 9.6.20 (64-bit)

- Improved support for some older Brother scanners
- Added support for installing Photoshop CC 2019 plugin

Added support for 'Input | Page border' option:
- For scanners that can add a 5 mm white border around a scan
- Currently only supports some Epson DS-series scanners

You can lock options settings by write-protecting vuescan.ini:
- This lets you set up starting options for any user
- This can be used to implement a 'Kiosk mode'
- This can be used to set up a scanning user account


VueScan 9.6.19 (64-bit)
- Improved support for changing color theme while running
- Added support for Cut/Copy/Paste on Mac (Apple-X/Apple-C/Apple-V))
- Added support for 'Input | Overscan'
- For photos - puts a border around scans
- Supports most Fujitsu fi-series and iX-series scanners
- Supports most Epson document scanners
- Added support for 'Input | Double feed detect'
- For scanners that have ultrasonic double-feed detection
- Supports most Fujitsu fi-series and iX-series scanners
- Supports most Canon DR-series document scanners


VueScan 9.6.18 (64-bit)
- Improved user interface (integrated wxWidgets 3.1)


VueScan 9.6.17 (64-bit)
- Improved support for PIE and Reflecta scanners
- Improved support for color themes on Windows, Mac and Linux
- Assorted small bug fixes
- Added support for new Brother scanners: DCP-J1100DW, DCP-J772DW, DCP-J774DW, DCP-J972N, DCP-J973N, DCP-J978N, DCP-J988N, MFC-J1300DW, MFC-J1500N, MFC-J690DW, MFC-J890DW, MFC-J893N, MFC-J895DW, MFC-J898N, MFC-J995DW


VueScan 9.6.16 (64-bit)
- Added support for new Epson scanners: DS-1610 , DS-535 , DS-775 , EP-30VA , EP-709A , EP-710A , EP-711A , EP-810A , EP-811A , EP-880A , EP-881A , EP-979A3 , ES-300WR , ES-500WR , ET-2710 , ET-8700 , L3110 , L3150 , L380 , LX-10000F , LX-7000F , PX-M380F , PX-M381FL , PX-M7070FX , PX-M884F , PX-M886FL , WF-2860 , WF-C17590 , WF-C20590 , WF-C5710 , WF-C5790 , WF-C8690 , WF-C869R , XP-250 , XP-350 , XP-450


VueScan 9.6.15 (64-bit)
- Fixed an assortment of small problems
- Added support for new Canon scanners: G2010 series, G3010 series, G4010 series, XK50, XK70


VueScan 9.6.14 (64-bit)
- Fixed problem on some high-resolution Windows displays
- Fixed problem with some WIA scanners on Windows
- Added support for user-specified watermarks
- Use 'Output | Watermark 1' and 'Output | Watermark 2'
- Set 'Input | Options' to 'Professional' to use this


VueScan 9.6.13 (64-bit)
- Improved automatic cropping of photos

Improved batch scanning of photos:
- Best using scanner with straight feeding, without bending
- Best to feed in long direction for minimal skew
- Best to scan photos to JPEG
- Tape black paper to lid if using flatbed (helps scan white borders)
- Open scanner and clean glass if you get vertical stripes
- (Future version of VueScan will improve 'Input | Auto skew')

Best scanners for batch scanning photos:
- Fujitsu document scanners
- Canon DR-series
- Brother ADS-series
- Avision document scanners
- Epson FF-640
- Epson GT-S50
- Epson GT-S80
- Epson ES-400
- Epson ES-500
- Epson DS-530
- Epson DS-575


VueScan 9.6.12 (64-bit)
- If set to 'Off', one file per scan is produced
- If set to 'On', one file can have any number of pages

If set to 'Blank page', a blank page causes a new file to be started:
- Option enabled if 'Input | Mode' set to 'Doc Feeder' or 'Duplex Feeder'
- Blank pages are not saved

If set to 'Front/Back', the front and back of a duplex scan saved per file:
- Option enabled if 'Input | Mode' set to 'Duplex Feeder'
- Useful for scanning postcards (two sided)
- Useful for batch scanning photos, with writing on the back of some
- Useful for scanning two-sided pages to separate files
- If 'Input | Blank page removal' is set, a blank side isn't saved. Useful if only some photos or pages have writing on the back

Enhanced multi page options:
- Output | TIFF multi page
- Output | JPEG multi page
- Output | PDF multi page
- Output | OCR text multi page

When scanning photos, set 'Input | Media size' to photo size or larger:
- Also set 'Crop | Crop size' to photo size


VueScan 9.6.11 (32-bit)
- Changed default button to Scan/Scan+ for some flatbed scans
- Turned off 'Prefs | Auto load options' by default (unless vuescan.ini exists), (this solves problems when accidentally changing options settings)
- Added support for Xerox DocuMate 4440
- Fixed problem with Canon MG5600 at 1200 dpi


VueScan 9.6.10 (64-bit)
- Significantly improved automatic cropping


VueScan 9.6.08 (64-bit)
- Fixed problem with Canon MX520
- Fixed problem with some eSCL (AirPrint/Scan) scanners
- Fixed problem with HP Scanjet Pro 2500 f1
- Fixed problem with PIE PowerSlide X
- Fixed miscellaneous small problems


VueScan 9.6.07 (64-bit)
- Improved support for WIA scanners on Windows
- Added support for using script for 'Prefs | Viewer'
- Can use .bat file on Windows
- Can use .sh or .csh file on Mac OS X and Linux
- Added support for higher resolution scans on some Epson document scanners
- Faster termination of transparency scan on Epson scanners with lamp covered
- Fixed miscellaneous small problems


VueScan 9.6.06 (64-bit)
- Improved support for some HP printer/scanner/copiers
- Fixed problem when both USB and networked scanners connected


VueScan 9.6.05 (64-bit)
- Reduced size of color PDF files by 30% to 50%
- Changed default setting for Doc Feeder to B/W text
- Fixed problem with duplex with AirPrint/eSCL MFPs


VueScan 9.6.04 (64-bit)
- Fixed problems with AirPrint/eSCL MFPs

Added support for networked business MFPs:
- Gestetner
- infotec
- Konica Minolta
- Lanier
- NRG
- Ricoh
- Savin


VueScan 9.6.03 (64-bit)
- Added support for scanning from AirPrint MFPs
- Several hundred new models supported
- Works on Windows, Mac OS X and Linux
- Faster scanning with some networked MFPs
- User interface improvements


VueScan 9.6.02 (64-bit)
Added support for 2 new Epson printer/scanner/copiers:
- WF-7710
- WF-7720

Added support for 37 new Brother printer/scanner/copiers:
- DCP-7090
- DCP-7095D
- DCP-7190D
- DCP-7195DW
- DCP-B7500D
- DCP-B7520DW
- DCP-B7530DN
- DCP-B7535DW
- DCP-L2510D
- DCP-L2530DW
- DCP-L2535D
- DCP-L2535DW
- DCP-L2537DW
- DCP-L2550DN
- DCP-L2550DW
- DCP-L2551DN
- FAX-L2710D
- HL-L2390DW
- HL-L2395DW
- MFC-7390
- MFC-7490D
- MFC-7890DN
- MFC-7895DW
- MFC-B7700D
- MFC-B7715DW
- MFC-B7720DN
- MFC-L2690DW
- MFC-L2710DN
- MFC-L2710DW
- MFC-L2713DW
- MFC-L2715D
- MFC-L2715DW
- MFC-L2717DW
- MFC-L2730DN
- MFC-L2730DW
- MFC-L2750DW
- MFC-L2770DW


VueScan 9.6.01 (64-bit)
- User interface easier to use
- Added VueScan a64 for Windows 10 ARM
- Added 'Help | Update' command to install VueScan updates
- No longer show tips dialog on startup


VueScan 9.5.94 (64-bit)
Added support for e-mailing the most recent scan:
- Use 'EMail' button (next to 'View' button) to send e-mail
- You're prompted to enter 'Email To:' and 'Email Subject:'
- Requires Professional Edition
- Uses http://appmail.hamrick.com to send email
- Scans are forwarded, not written to our server's hard drive
- On Linux, you need to install curl (/usr/bin/curl)


VueScan 9.5.93 (64-bit)
- Added support for Epson XP-6000
- Fixed problem with network-connected HP LaserJet MFP M278-M281
- Fixed problem with 1200 dpi scans with some LaserJet MFPs
- Fixed problem with some Brother scanners
- Fixed problem with Plustek OpticSlim 1180 on Mac OS X
- Fixed problem with Nikon LS-8000/LS-9000 focusing

Under-the-hood improvements:
- Updated Windows compiler to Visual Studio 2017
- Added drivers for Windows 10 ARM (untested)
- Updated Linux build to use Ubuntu 16.04 LTS


VueScan 9.5.92 (64-bit)
- Added support for HP LaserJet MFP M278-281
- Improved finding networked scanners on some slow networks
- Improved handling of end of page with Avision scanners
- Improved scan speed with Fujitsu fi-6770
- Improved support for Plustek OpticFilm 135
- Fixed problem with some Epson ESC/I-2 document scanners
- Fixed problem with saving to multiple files with long names
- Fixed problem with HP ScanJet 4p document feeder
- Fixed problem with some Brother scanners


VueScan 9.5.91 (64-bit)
- Changed to only show 'Save' and 'Save+' when not already saved
- Improved ADF centering with some Epson scanners
- Fixed problem with some Epson ESC/I-2 document scanners

Added support for 11 new HP scanners:
- Deskjet 2200
- Deskjet 2600
- Deskjet 5000
- Deskjet 5200
- ENVY 5000
- ENVY Photo 6200
- ENVY Photo 7100
- ENVY Photo 7800
- Officejet 5200
- Officejet Pro 7720
- Officejet Pro 7730


VueScan 9.5.90 (64-bit)
- Faster startup with some scanners
- Improved support for 35 Epson ESC/I-2 document scanners
- (also adds support for these scanners on Mac OS X and Linux)
- DS-1630
- DS-1660W
- DS-320
- DS-360W
- DS-40
- DS-410
- DS-50000
- DS-510
- DS-520
- DS-5500
- DS-560
- DS-570W
- EP-879A
- ES-200
- ES-300W
- ES-400
- ES-500W
- ET-2700
- ET-2750
- ET-3700
- ET-4750
- ET-7700
- FF-640
- PX-M680F
- PX-M780F
- PX-M781F
- PX-M860F
- WF-3720
- WF-4720
- WF-4730
- WF-4740
- WF-6530
- WF-6590
- WF-8510
- WF-R8590


VueScan 9.5.89 (64-bit)
- Significantly improved automatic cropping
- Fixed problem with Canon DR-3080CII
- Fixed problem with HP LaserJet M426 and M427 with USB
- Added support for 8 Epson printer/scanner/copiers
- ET-2700
- ET-2750
- ET-3700
- ET-3750
- ET-4750
- ET-7700
- ET-7750
- XP-8500


VueScan 9.5.88 (64-bit)
- Added support for auto cropping with black background

Added support for 7 Canon printer/scanner/copiers:
- TS3100 series
- TS5100 series
- TS6100 series
- TS8100 series
- TS9100 series
- TR7500 series
- TR8500 series


VueScan 9.5.87 (64-bit)

Added support for 172 Avision scanners:
- AD125
- AD215W
- AD250
- AH118
- AH125
- AH130
- AH135
- AH225
- AH235
- AH240
- AH245
- AH255
- AH260
- AH2600
- AH330
- AH3400
- AH360
- AH380
- AH50
- AH610
- AH617
- AH620
- AH625
- AH640
- AI130
- AI140
- AI150
- AI160
- AI170
- AI180
- AI180+
- AI2010
- AI260
- AI280
- AI3000
- AI370
- AI370
- AI380
- AI390
- AI530
- AI550
- AI620
- AN230W
- AT130
- AT160
- AT185
- AT200
- AT260
- AT270
- AT300
- AT313
- AT320A
- AT322
- AT360
- AT366
- AT500
- AT510
- AT580
- AT580U
- AT650
- AT660
- AT83
- AV1860
- AV188
- AV220G
- AV280
- AV3200U+
- AV3220U
- AV50F+
- AV5200
- AV5400
- AV750
- AV8300
- AV830S
- AW1230
- AW1260
- AW1620
- AW1810
- AW1820
- AW1900
- AW2000
- AW2860
- AW570
- AW6100
- AW6120
- AW6160
- AW6200
- AW6280
- AW6300
- DSL3200
- DSL3930
- DSL8160
- DSL8280
- FB1200+
- FB1600
- FBH1000
- FBH2000
- FBH2100
- FBH2200E
- FBH5000
- FBH6100
- FBH6300
- FBH6350E
- FBH6380E
- FBZ160
- FBZ360
- FZ90
- WinMage C100
- WinMage C100+
- WinMage C200
- WinMage C500
- WinMage C500+
- WinMage C600
- WinMage C700
- WinMage D120
- WinMage D120+
- WinMage D220
- WinMage D520
- WinMage D520+
- WinMage D6000
- WinMage D650
- WinMage E1000
- WinMage E1000+
- WinMage E2000
- WinMage E5000
- WinMage E5000+
- WinMage F1300
- WinMage F5300
- WinMage F5300+
- WinMage G1100
- WinMage G2100
- WinMage G5100
- WinMage G7100
- WinMage G7120
- WinMage L1250
- WinMage L2230
- WinMage L5100
- WinMage L5250
- WinMage L6250
- WinMage L7250
- WinMage L7280
- WinMage L7280+
- WinMage L7350
- WinMage M110
- WinMage M1160
- WinMage M1200
- WinMage M1360
- WinMage M1600
- WinMage M1800
- WinMage M2100
- WinMage M2200
- WinMage M2480
- WinMage M2580E
- WinMage M3000
- WinMage M3200
- WinMage Q2120E
- WinMage Q2200E
- WinMage Q520
- WinMage Q7100
- WinMage Q7250
- WinMage Q8150
- WinMage S125
- WinMage S125+
- WinMage S525
- WinMage T110
- WinMage T230
- WinMage T510
- WinMage U315
- WinMage U350
- WinMage U370
- WinMage U380
- WinMage U390


VueScan 9.5.86 (64-bit)
- Fixed problem with changed output file types when restarting
- Fixed problem with some newer Avision scanners when scanning text
- Fixed problem with mirroring on Canon DR-F120 and DR-C240
- Fixed problem with Brother MFC-L2740DW
- Fixed problem on Windows when full path name longer than 256
- Fixed problem on Windows with temporary files not deleted on exit


VueScan 9.5.85 (64-bit)
- Fixed problem with Brother MFC-J6930DW duplex scans
- Fixed problem with HP Officejet Pro 8730 duplex scans
- Fixed problem with Epson WF-3720 on Windows
- Fixed problem with Xerox 3635MFP on Windows
- Fixed problem with Canon DR-F120 scanner


VueScan 9.5.84 (64-bit)
- Fixed problem with some Canon DR-series scanners
- Faster scanning with some Fujitsu document scanners


VueScan 9.5.83 (64-bit)
- Change log not available for this version


VueScan 9.5.82 (64-bit)
- Improved scan speed with some Samsung scanners
- Added support for film strips up to 100 frames on PIE/Reflecta scanners
- Fixed problem with some Brother scanners
- Fixed problem with some Fujitsu scanners on Windows
- Fixed hangs on Windows when some networked scanners turned off
- Fixed hangs with some types of webcams


VueScan 9.5.81 (64-bit)
- Added support for Epson L485 and L486

Added support for legal-size scans (14 inches) with:
- Genius ColorPage SF600
- Iris Iriscan Express 2
- Plustek OpticSlim M12
- Fixed problem with some Canon DR-series scanners
- Improved scan speed with Fujitsu fi-6140Z
- Added support for auto-focus on Epson Expression 12000
- Fixed problem with some Fujitsu scanners on Windows
- SP-25
- fi-6120ZLA
- fi-6125ZLA
- fi-6130ZLA
- fi-6135ZLA
- fi-6140ZLA
- fi-6220ZLA
- fi-6225ZLA
- fi-6230ZLA
- fi-6235ZLA
- fi-6240ZLA


VueScan 9.5.80 (64-bit)
- Improved scan quality with some Minolta film scanners
- Added support for HP Deskjet 3700
- Added support for duplex scanning with some Samsung scanners
- Fixed problem with Microtek ArtixScan 120tf
- Fixed problem with Brother ADS-1500W and ADS-1600W


VueScan 9.5.79 (64-bit)

Added support for 14 Epson printer/scanner/copiers:
- DS-320
- L385
- L386
- PX-M680F
- PX-M780F
- PX-M781F
- WF-3720
- WF-4720
- WF-4730
- WF-4740
- XP-240
- XP-243
- XP-245
- XP-247

Added support for 12 Canon printer/scanner/copiers:
- iR C3020
- iR C3025
- MF631C
- MF632C
- MF633C
- MF634C
- MF635C
- MF731C
- MF732C
- MF733C
- MF734C
- MF735C


VueScan 9.5.78 (64-bit)
- Fixed problem with automatic detection of color scans
- Fixed problem with duplex on HP Officejet Pro 8720
- Fixed problem with duplex on Brother ADS-2800W
- Fixed problem with reading multi-page TIFF files
- Added support for Canon G4000
- Added support for Epson ET-2650, EP-M570T, L496


VueScan 9.5.77 (64-bit)
- Fixed problem with crashing in 9.5.76
- Fixed problem with some Brother scanners
- Added support for reading multi-page TIFF files


VueScan 9.5.76 (64-bit)
- Improved auto-detection of 'Input | Media"
- Improved blank page removal


VueScan 9.5.75 (64-bit)
- Added 'Help | Help center..." for online help
- Added support for 7200 dpi with PrimeFilm 7250 PRO
- Added auto-focus support with Epson Expression 1640XL / ES-8500


VueScan 9.5.74 (64-bit)
- Added support for full 8.5 inch width on some Brother scanners
- Added support for more than 15 networked scanners (up to 63)
- Added support for higher resolutions on Canon MG5400
- Fixed problem with HP OfficeJet 3830
- Fixed problem with some Avision and HP scanners
- Fixed problem with Epson WF-7610


VueScan 9.5.73 (64-bit)
- Added support for duplex scanning with Epson XP-830
- Added support for Epson XP-340 Series (XP-342 343 345)
- Fixed problem with some network connected HP LaserJet MFPs
- Fixed problem with 16mm film adapter on Nikon CoolScan 8000/9000
- Fixed problem with 1200 dpi scans on Canon MG6600
- Improved Italian translation of VueScan


VueScan 9.5.72 (64-bit)
- Added support for Epson EP-879A
- Fixed document feeder centering with Epson ET-16500
- Fixed problem with Samsung SCX-4623FW
- Improved scan speed with Fujitsu iX500
- Improved scan speed with some older HP printer/scanner/copiers


VueScan 9.5.71 (64-bit)
- Added support for Epson XP-900
- Added support for duplex scanning on some Samsung, Xerox and Dell scanners
- Added support for network scanning on some Samsung, Xerox and Dell scanners
- Fixed problem with some Canon DR-series scanners

Added support for 27 Xerox printer/scanner/copiers:
- Phaser 3100MFP
- Phaser 3300MFP
- Phaser 3635MFP
- Phaser 6110MFP
- Phaser 6115MFP
- Phaser 6121MFP
- Phaser 6128MFP
- Phaser 3200MFP
- WorkCentre 3025
- WorkCentre 3045
- WorkCentre 3119
- WorkCentre 3210
- WorkCentre 3215
- WorkCentre 3220
- WorkCentre 3225
- WorkCentre 3315
- WorkCentre 3325
- WorkCentre 3550
- WorkCentre 3615
- WorkCentre 4118
- WorkCentre 5016
- WorkCentre 5019
- WorkCentre 5020
- WorkCentre 5021
- WorkCentre 6015
- WorkCentre PE120
- WorkCentre PE220

Added support for 2 Dell printer/scanner/copiers:
- 1235cn
- 1815dn


VueScan 9.5.69 (64-bit)
- Added support for duplex scans with Canon MB5100 and MB5400
- Fixed problem recognizing some networked HP scanners
- Fixed problem with Canon DR-M160
- Fixed problem with Canon DR-7580
- Fixed problem with Epson ES-500W on Windows
- Fixed problem with some Brother ADS-series scanners
- Fixed problem with doc feeder centering with Fujitsu fi-5750

Fixed problem with some Canon scanners:
- MF210
- MF220
- MF620C
- MF720C


VueScan 9.5.68 (64-bit)
Easier scanning of many snapshots:
- Set 'Input | Media size' a bit larger than largest snapshot
- Put snapshot on flatbed in upper left corner
- Press 'Enter' key (or click 'Preview' button)
- Adjust cropping with mouse (if necessary)
- Press 'Enter' key (or click 'Save' button) to save to file
- Go to step 2

Easier scanning of scrapbooks:
- Set 'Input | Media size' a bit larger than largest page
- Put scrapbook on flatbed in upper left corner
- Press 'Enter' key (or click 'Preview' button)
- Adjust cropping with mouse (if necessary)
- Press 'Enter' key (or click 'Save' button) to save to file
- Repeat steps 4-5 for each additional image
- Go to step 2


VueScan 9.5.67 (64-bit)
Added support for 17 new HP scanners:
- HP LaserJet Pro MFP M130a"
- HP LaserJet Pro MFP M130nw"
- HP LaserJet Pro MFP M130fn"
- HP LaserJet Pro MFP M130fw"
- HP LaserJet Pro MFP M132a"
- HP LaserJet Pro MFP M132fn"
- HP LaserJet Pro MFP M132fp"
- HP LaserJet Pro MFP M132fw"
- HP LaserJet Pro MFP M132nw"
- HP LaserJet Pro MFP M132snw"
- HP LaserJet Pro MFP M133a"
- HP LaserJet Pro MFP M133fn"
- HP LaserJet Pro MFP M134a"
- HP LaserJet Pro MFP M134fn"
- HP LaserJet Pro MFP M227sdn"
- HP LaserJet Pro MFP M227fdw"
- HP OfficeJet 6950

Added support for 5 new Brother scanners:
- DCP-L8410CDW
- MFC-L8610CDW
- MFC-L8690CDW
- MFC-L8900CDW
- MFC-L9570CDW

Added support for 3 new Epson scanners:
- DS-G20000
- Expression 12000XL
- LP-M8170


VueScan 9.5.66 (64-bit)
- Only display tips on startup if unregistered
- Fixed problem with duplex scans on some HP scanners
- Fixed problem with some ADS Brother scanners
- Fixed problem with Fujitsu fi-5650
- Fixed problem with HP ScanJet 3000 on Mac OS X
- Fixed problem with HP 4p and 6100c document feeder
- Added support for HP Deskjet 3830 document feeder
- Added support for 150 dpi on Epson GT-1500


VueScan 9.5.65 (64-bit)
Added support for 2 new Epson scanners:
- XP-540
- XP-640

Support for 6 new HP scanners:
- HP Color LaserJet Enterprise Flow MFP M577c
- HP Color LaserJet Enterprise Flow MFP M577cm
- HP Color LaserJet Enterprise Flow MFP M577z
- HP Color LaserJet Enterprise MFP M577dn
- HP Color LaserJet Enterprise MFP M577dnm
- HP Color LaserJet Enterprise MFP M577f

Changed:
- Default 'Crop | Buffer (%)' to 8%
- Default 'Output | Color space' to 'sRGB' on Mac
- Default 'Output | Monitor color space' to 'sRGB' on Mac

Fixed:
- Problem with scanning color negatives on Epson V800/V850
- Problem with HP ScanJet 3670
- Doc feeder centering with Fujitsu fi-5530 and fi-5750
- Problem with Brother MFC-L2700D (doesn't support 1200 dpi)


VueScan 9.5.64 (64-bit)
- Automatically changes to Flatbed if no document in Feeder
- Fixed problem with document feeder centering with Epson WF-3620
- Fixed problem with some networked Samsung printer/scanner/copiers

Added support for 7 new Epson scanners:
- DS-310
- DS-360W
- DS-570W
- ES-200
- ES-300W
- ES-400
- ES-500W


VueScan 9.5.63 (64-bit)
- Fixed problem with document feeder centering with Brother MFC-J6925DW
- Fixed problem with Canon LiDE 100/110/120/200/210/220 on some systems
- Fixed problem with 'Input | Options' changing when 'Help | About' used
- Fixed problem with Preview.app on Mac OS X 10.11 and 10.12


VueScan 9.5.62 (64-bit)
- Added support for 44 additional Avision scanners: AD125S, AD215, AD215L, AD215U, AD230, AD240, AD240S, AD250F, AD260, AD280, AN120FW, AN240, AN240W, AN280F, AV175+, AV1750, AV176+, AV1760, AV176U, AV178+, AV185+, AV186+, AV187, AV1880, AV32, AV320E2+, AV620C2+, AV620N, AVA6+, AW210, DSL2200, DSL2600, DSL3100, DSL3300, DSL3700, DSL8000, DSL8100, FB1000N, FB1200, FB5000, FB6200, FB6280E, IS1000, SC8800


VueScan 9.5.61 (64-bit)
- Added support for plugin for Photoshop CC 2017
- Added preliminary support for Plustek ePhoto Z300
- Fixed problem with duplex scanning with some Fujitsu scanners
- Fixed problem with some older HP scanners
- Fixed problem with duplex scanning on HP CM2320fxi
- Fixed problem with some Canon DR-series scanners
- Fixed problem with duplex scanning with Epson WF-7610 and WF-7620
- Fixed problem with HP PageWide Pro 577 WiFi connection
- Made default for OCR output plain text format (not RTF)
- Added support for 25 new Brother scanners: DCP-J567N, DCP-J767N, DCP-J968N, MFC-J2330DW, MFC-J2730DW, MFC-J3530DW, MFC-J3930DW, MFC-J5330DW, MFC-J5335DW, MFC-J5730DW, MFC-J5830DW, MFC-J5930DW, MFC-J6530DW, MFC-J6535DW, MFC-J6580CDW, MFC-J6730DW, MFC-J6930DW, MFC-J6935DW, MFC-J6980CDW, MFC-J6995CDW, MFC-J737DN, MFC-J837DN, MFC-J887N, MFC-J907DN, MFC-J997DN


VueScan 9.5.60 (64-bit)
- Added support for duplex scanning with HP LaserJet CM2320fxi
- Fixed problem with some HP N-series scanners on Windows
- Fixed problem with Canon MG5700
- Fixed problem with HP OfficeJet Pro 8740 with network connection
- Only support scanning from video devices with more than 2 MPixels

更新時間：2020-03-06
更新細節：

更新時間：2020-03-04
更新細節：

更新時間：2020-03-04
更新細節：

What's new in this version:

Changes:
- Polarssl: removed
- Smtp: add CURLOPT_MAIL_RCPT_ALLLOWFAILS and --mail-rcpt-allowfails
- WolfSSH: new SSH backend

Bugfixes:
- Altsvc: improved header parser
- Altsvc: keep a copy of the file name to survive handle reset
- Altsvc: make saving the cache an atomic operation
- Altsvc: use h3-27
- Azure: disable brotli on the macos debug-builds
- Build: remove all HAVE_OPENSSL_ENGINE_H defines
- Checksrc.bat: Fix not being able to run script from the main curl dir
- Cleanup: fix several comment typos
- Cleanup: fix typos and wording in docs and comments
- Cmake: add support for CMAKE_LTO option
- Cmake: clean up and improve build procedures
- Cmake: enable SMB for Windows builds
- Cmake: improve libssh2 check on Windows
- Cmake: Show HTTPS-proxy in the features output
- Cmake: support specifying the target Windows version
- Cmake: use check_symbol_exists also for inet_pton
- Configure.ac: fix comments about --with-quiche
- Configure: disable metalink if mbedTLS is specified
- Configure: disable metalink support for incompatible SSL/TLS
- Conn: do not reuse connection if SOCKS proxy credentials differ
- Conncache: removed unused Curl_conncache_bundle_size()
- Connect: remove some spurious infof() calls
- Connection reuse: respect the max_concurrent_streams limits
- Contributors: also include people who contributed to curl-www
- Contrithanks: use the most recent tag by default
- Cookie: check __Secure- and __Host- case sensitively
- Cookies: make saving atomic with a rename
- Create-dirs.d: mention the mode
- Curl: avoid using strlen for testing if a string is empty
- Curl: error on --alt-svc use w/o support
- Curl: let -D merge headers in one file again
- Curl: make #0 not output the full URL
- Curl: make the -# spaceship bar not wrap the line
- Curl: remove 'config' field from OutStruct
- Curl:progressbarinit: ignore column width from terminals < 20
- Curl_escape.3: add a link to curl_free
- Curl_getenv.3: fix the memory handling description
- Curl_global_init: assume the EINTR bit by default
- Curl_global_init: move the IPv6 works status bool to multi handle
- CURLINFO_COOKIELIST.3: Fix example
- CURLOPT_ALTSVC_CTRL.3: fix the DEFAULT wording
- CURLOPT_PROXY_SSL_OPTIONS.3: Sync with CURLOPT_SSL_OPTIONS.3
- CURLOPT_REDIR_PROTOCOLS.3: update the DEFAULT section
- Data.d: remove "Multiple files can also be specified"
- Digest: do not quote algorithm in HTTP authorisation
- Docs/HTTP3: add --enable-alt-svc to curl's configure
- Docs/HTTP3: update the OpenSSL branch to use for ngtcp2
- Docs: fix typo on CURLINFO_RETRY_AFTER
- Easy: remove dead code
- Form.d: fix two minor typos
- Ftp: convert 'sock_accepted' to a plain boolean
- Ftp: remove superfluous checking for crlf in user or pwd
- Ftp: shrink temp buffers used for PORT
- Github action: add CIFuzz
- Github: Instructions to post "uname -a" on Unix systems in issues
- GnuTLS: always send client cert
- Gtls: fixed compilation when using GnuTLS < 3.5.0
- Hostip: move code to resolve IP address literals to `Curl_resolv`
- HTTP-COOKIES: describe the cookie file format
- HTTP-COOKIES: mention that a trailing newline is required
- Http2: make pausing/unpausing set/clear local stream window
- Http2: now requires nghttp2 >= 1.12.0
- Http: added 417 response treatment
- Http: increase EXPECT_100_THRESHOLD to 1Mb
- Http: mark POSTs with no body as "upload done" from the start
- Http: move "oauth_bearer" from connectdata to Curl_easy
- Include: remove non-curl prefixed defines
- KNOWN_BUGS: Multiple methods in a single WWW-Authenticate: header
- Libssh2: add support for forcing a hostkey type
- Libssh2: fix variable type
- Libssh: improve known hosts handling
- Llist: removed unused Curl_llist_move()
- Location.d: the method change is from POST to GET only
- Md4: fixed compilation issues when using GNU TLS gcrypt
- Md4: use init/update/final functions in Secure Transport
- Md5: added implementation for mbedTLS
- Mk-ca-bundle: add support for CKA_NSS_SERVER_DISTRUST_AFTER
- Multi: change curl_multi_wait/poll to error on negative timeout
- Multi: fix outdated comment
- Multi: if Curl_readwrite sets 'comeback' use expire, not loop
- Multi_done: if multiplexed, make conn->data point to another transfer
- Multi_wait: stop loop when sread() returns zero
- Ngtcp2: add error code for QUIC connection errors
- Ngtcp2: fixed to only use AF_INET6 when ENABLE_IPV6
- Ngtcp2: update to git master and its draft-25 support
- Ntlm: move the winbind data into the NTLM data structure
- Ntlm: pass the Curl_easy structure to the private winbind functions
- Ntlm: removed the dependency on the TLS libaries when using MD5
- Ntlm_wb: use Curl_socketpair() for greater portability
- Oauth2-bearer.d: works for HTTP too
- Openssl: make CURLINFO_CERTINFO not truncate x509v3 fields
- Openssl: remove redundant assignment
- Os400: fixed the build
- Pause: force-drain the transfer on unpause
- Quiche: update to draft-25
- README: mention that the docs is in docs/
- RELEASE-PROCEDURE: feature win is closed post-release a few days
- Runtests: make random seed fixed for a month
- Runtests: restore the command log
- Schannel: make CURLOPT_CAINFO work better on Windows 7
- Schannel_verify: Fix alt names manual verify for UNICODE builds
- Sha256: use crypto implementations when available
- Singleuse.pl: support new API functions, fix curl_dbg_ handling
- Smtp: support the SMTPUTF8 extension
- Smtp: support UTF-8 based host names in MAIL FROM
- SOCKS: make the connect phase non-blocking
- Strcase: turn Curl_raw_tolower into static
- Strerror: increase STRERROR_LEN 128 -> 256
- Test1323: added missing 'unit test' feature requirement
- Tests: add a unit test for MD4 digest generation
- Tests: add a unit test for SHA256 digest generation
- Tests: add a unit test for the HMAC hash generation
- Tests: deduce the tool name from the test case for unit tests
- Tests: fix Python 3 compatibility of smbserver.py
- Tool_dirhie: allow directory traversal during creationtool_homedir: change GetEnv() to use libcurl's curl_getenv()
- Tool_util: improve Windows version of tvnow()
- Travis: update non-OpenSSL Linux jobs to Bionic
- Url: include the failure reason when curl_win32_idn_to_ascii() fails
- Urlapi: guess scheme properly with credentials given
- Urldata: do string enums without #ifdefs for build scripts
- Vtls: refactor Curl_multissl_version to make the code clearer
- Win32: USE_WIN32_CRYPTO to enable Win32 based MD4, MD5 and SHA256

更新時間：2020-03-04
更新細節：

What's new in this version:

- Fix a KeyStores with multiple certificates are not supported error from Jetty when passing certain kinds of certificates, such as domain wildcards (regression in 2.204.3). (pull 4539, issue 60857, Winstone 5.8 release notes)