Syncovery (64-bit) 歷史版本列表
更新時間：2023-02-11
更新細節：
What's new in this version:
Syncovery 10.3.2 (64-bit)
- Fixes a bug causing inability to start jobs with additional destinations in the background
Syncovery 10.3.1 (64-bit)
- Profiles with priority level 0 are now exempted from any priority limitations. The new priority mechanism will only affect profiles with a priority level of 1 and higher.
- Added a detailed error message where it would previously only say “Not started – please try again in a short while”
Syncovery 10.3.0 (64-bit)
- Profiles can now be given a priority. The scheduler can avoid starting lower priority jobs when higher priority jobs are running, or they can be paused if a higher priority job starts later. Alternatively, lower priority jobs can be limited to a single copying thread while a higher priority job is running. The new feature needs to be enabled on the “More” tab sheet of the Program Settings dialog. After that, each profile has a new field in Advanced Mode. You will find the priority field in the top right of the profile editor. We recommend using priority numbers between 1 and 100, but you can go as high as 1000000 or even higher. A higher number means a higher priority.
Syncovery 10.2.7 (64-bit)
- B2 upload improvements (especially for large files with multi-threaded uploads), including a more efficient socket usage and an automatic limit of max. 100 open sockets. The maximum number will automatically be shared between the threads, so that each thread gets a chance (although a thread sometimes has to wait until a socket slot becomes free).
- E-mail notifications now include the headers Message-Id and MIME-Version to avoid being detected as spam
Syncovery 10.2.6 (64-bit)
- Additional destinations can now be subfolders of the main destination, although this is not recommended
Syncovery 10.2.5 (64-bit)
- Fixes two cases of subfolders not being created on the destination side before copying a file
Syncovery 10.2.4 (64-bit)
- Fixes a problem where it could take multiple passes to delete folder hierarchies in Exact Mirror mode if “Folder Timestamps” was chosen under Comparison->More
Syncovery 10.2.3 (64-bit)
- Adds the new PascalScript callback functions FileRename and FileDelete
- Testing Internet connectivity for local IP addresses now works with only exclusions (and inclusions empty)
Syncovery 10.2.2 (64-bit)
- The Internet connectivity check feature can now just test for local IP addresses rather than the connection name
- Fixes binary verification of files with encrypted S3 buckets
Syncovery 10.2.1 (64-bit)
- Change log not available for this version
Syncovery 10.2.0 (64-bit)
- Speeds up processing of folders in real-time folder based mode
- Real-time folder based mode honors exclusions better now so that subfolders are not scanned if their name is in the Exclusions
- Fixes a bug where the same SmartTracking database was used for additional destinations in the profile
Syncovery 10.1.16 (64-bit)
- Fixes errors with Amazon S3 by implementing an improved detection of S3 buckets requiring AWS Signature Version 4
Syncovery 10.1.14 (64-bit)
- Fixes a possible/rare application hang
Syncovery 10.1.13 (64-bit)
- Change log not available for this version
Syncovery 10.1.12 (64-bit)
- Makes it possible to list a large number of users, groups, or sites and drives via the Microsoft Graph API
Syncovery 10.1.10 (64-bit)
- Minor fix: after a failed upload, when Syncovery tries to delete the incompletely uploaded file, it now takes filename encryption into account
Syncovery 10.1.9 (64-bit)
- In attended mode, Syncovery will now always give you a chance to make room or replace the destination drive if it becomes full during the copying phase
- Now correctly saves the Ultra compression level for 7-zip files
- No longer specifies any storage class for S3 uploads of empty files or emulated folder items
- Additional fixes
Syncovery 10.1.8 (64-bit)
- Can now access folders listed in the “Computers” section of Google Drive. Just type the computer name in the Container field on the Internet Protocol Settigs dialog.
- Fixes a rare error about a critical section hang when larger cloud hierarchies are scanned with multiple threads
Syncovery 10.1.7 (64-bit)
- Fixes stability issues with FTP library 1
Syncovery 10.1.6 (64-bit)
- Improved handling of rare S3 error related to the system time being too different from the S3 server time
- AcceptAllSSLCertificates=1 can now also be used to accept unknown email server certificates used in the “Email” protocol
- The Redundancy Master setting is now saved in Status.ini rather than Syncovery.ini, so that the main INI file can be copied to a redundancy slave without making it another master
Syncovery 10.1.5 (64-bit)
- More efficient real-time event queue, to fix an occasional error “Critical Section Hang”
- Fixes button positioning in the French profile editor dialog with screen resolutions that use lower than 200% magnification
Syncovery 10.1.4 (64-bit)
- Folders shared from Google Team Drives are now included when browsing the “Shared with me” folders
- Fixes an error creating folders via WebDAV, especially when using the checkmark “On the right side, create a new folder each time”
- Implements retries when closing and appending the log file, possibly fixing rare issues where then main copying phase was missing from the profile run’s log file
Syncovery 10.1.3 (64-bit)
- Fixes a bug causing the scheduler to not start any profiles with some special settings, especially if the “Max. simultaneous jobs to run in a single execution process” is set to 1
Syncovery 10.1.2 (64-bit)
- Fixes email notifications being sent almost always, ignoring the actual notification settings
Syncovery 10.1.1 (64-bit)
- Adds some internal double-checks to ensure that permissions are never modified on the source side in one-way sync profiles
- Fixes a few minor bugs
Syncovery 10.1.0 (64-bit)
Fixed:
- Fixes profile groups not being shown in the profile selection list in Wizard Mode
- Fixes “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature
Syncovery 10.0.10 (64-bit)
Fixed:
- profile groups not being shown in the profile selection list in Wizard Mode
- “execute after” command lines prefixed with ++ being executed despite “nothing to do” when using the new sub-job spawning feature
Syncovery 10.0.9 (64-bit)
- Adds s checkmark on the Options tab sheet of the SmartTracking dialog: “Ignore File Creation Timestamps When Detecting Deleted Files”. This can help if you find that SmartTracking does not always detect deleted files, and the log file contains a line similar to: “File on right side created after last run completed”.
- On the Real-Time Settings dialog, tab sheet “Advanced”, the option to “switch to a normal, full sync if more than X real-time events are to be processed” can now also be used for the default mode “Process Complete folders”.
Syncovery 10.0.6 (64-bit)
- Improves SmartTracking detection of deleted files
- The feature “delete nothing to do logs” now works with logs for additional destinations
Syncovery 10.0.5 (64-bit)
- Fixes additional destinations from a profile being preconfigured as default for a new profile. New profiles will now correctly start empty with no additional destinations.
Syncovery 10.0.3 (64-bit)
- Enables all the new SSH algorithms in the updated SecureBlackBox library so it’s really compatible with all current SFTP servers. The Advanced SSH Settings dialog has been updated to include the new algorithms.
- Includes the new Syncovery Remote Service v10.00 to support the new “block level copying + versioning” feature where the Remote Service is used to make a versioned copy of the destination file, which can then be updated on a block level basis.
Syncovery 10.0.2 (64-bit)
- Fixes a Range Check Error when logging Windows Events in the 64 bit edition, which could also prevent the scheduler from starting
Syncovery 10.0.1 (64-bit)
New:
- Sync with multiple destinations in a single profile
- Free grouping of profiles – independent from profile names
- Adds support for the 7-Zip format (Windows only)
- Includes an updated SecureBlackBox library for SSH/SFTP
- Support for empty folders via S3 and Azure BLOB Storage protocols
- Adds the ability to combine versioning and block level copying
- Can spawn separate sub-jobs for each subfolder
- Adds miscellaneous smaller features
- New visual themes
- The upgrade is free for licenses issued since September 2020
- For older licenses, please click here to order your upgrade now!
更新時間：2023-02-11
更新細節：
更新時間：2023-02-10
更新細節：
更新時間：2023-02-10
更新細節：
What's new in this version:
Changed:
- New "Smudge Density" parameter in the Brush Creator for controlling the detail of the brush stroke when Smudge is used
- Colors in fractal upscaling are much more precise - this affects all tools using fractal upscaling: Liquify, Transform, Canvas Resize tools
- Filters' dialog windows remember their size and position after the restart
- New "Viewport: Background Color" option in the Preferences -> Color for changing the color of the viewport behind the canvas
Fixed:
- Fixed undo bug in the Liquify tool
- Fixed wrong application layout after the start with "Lock Panels" enabled
- Fixed issue with changed parameters of the brushes in "Favorites"
- Fixed black artifacts when the "Lens Blur" filter is used
更新時間：2023-02-08
更新細節：
更新時間：2023-02-06
更新細節：
更新時間：2023-02-03
更新細節：
What's new in this version:
- Fixed: Scroll commands in the image viewer were not functioning in build 58
- Changed: Removed the up, down, left, right keyboard shortcuts from the image scroll menu since those keys don't work since build 58
- Changed: Made playback loop back to the beginning when it stops at the end of a playlist
更新時間：2023-02-03
更新細節：
What's new in this version:
Changed:
- Faster response of the Liquify tool
- A new option in Preferences for changing the opacity of the reference image preview
- Added missing tooltip for the "Canvas Size" tool
- Added tooltip "Expand Panel" when the panel is collapsed
- "Copy to Favorites" option greyed out when "Favorites" is selected
- Instant analysis of some crash kinds directly in the crash report dialog
- Various minor changes in the UI
Fixed:
- Fixed crash with small grain scales
- Fixed Rebelle showing incorrect UI layout on start
- Fixed snapping of the reference image preview
- Fixed snapping of the selection
- "Favorites" is now remembered after using the pen eraser
更新時間：2023-02-02
更新細節：
更新時間：2023-01-28
更新細節：
What's new in this version:
General:
- Fix PDF plot text dimensions
- Ensure 3D model viewer is correctly initialized
Schematic Editor:
- Fix ERC crash
- Fix crash when importing Eagle schematic
- Fix crash when changing language and the simulator window is open
- Fix broken graphic import file extension filters for some locales
- Fix project rescue when symbol name cases do not match
- Enable real time connectivity by default
Symbol Editor:
- Prevent forward slash character in symbol name from corrupting symbol library
- Footprint Editor
- Do not prune layers when copying items to the clipboard