SuperAntiSpyware 歷史版本列表
更新時間：2019-09-11
更新細節：
What's new in this version:
Changes:
- CURLINFO_RETRY_AFTER: parse the Retry-After header value
- HTTP3: initial (experimental still not working) support
- curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool
- curl: support parallel transfers with -Z
- curl_multi_poll: a sister to curl_multi_wait() that waits more
- sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID
Bugfixes:
- CVE-2019-5481: FTP-KRB double-free
- CVE-2019-5482: TFTP small blocksize heap buffer overflow
- CI: remove duplicate configure flag for LGTM.com
- CMake: remove needless newlines at end of gss variables
- CMake: use platform dependent name for dlopen() library
- CURLINFO docs: mention that in redirects times are added
- CURLOPT_ALTSVC.3: use a "" file name to not load from a file
- CURLOPT_ALTSVC_CTRL.3: remove CURLALTSVC_ALTUSED
- CURLOPT_HEADERFUNCTION.3: clarify
- CURLOPT_HTTP_VERSION: seting this to 3 forces HTTP/3 use directly
- CURLOPT_READFUNCTION.3: provide inline example
- CURLOPT_SSL_VERIFYHOST: treat the value 1 as 2
- Curl_addr2string: take an addrlen argument too
- Curl_fillreadbuffer: avoid double-free trailer buf on error
- HTTP: use chunked Transfer-Encoding for HTTP_POST if size unknown
- alt-svc: add protocol version selection masking
- alt-svc: fix removal of expired cache entry
- alt-svc: make it use h3-22 with ngtcp2 as well
- alt-svc: more liberal ALPN name parsing
- alt-svc: send Alt-Used: in redirected requests
- alt-svc: with quiche, use the quiche h3 alpn string
- appveyor: pass on -k to make
- asyn-thread: create a socketpair to wait on
- build-openssl: fix build with Visual Studio 2019
- cleanup: move functions out of url.c and make them static
- cleanup: remove the 'numsocks' argument used in many places
- configure: avoid undefined check_for_ca_bundle
- curl.h: add CURL_HTTP_VERSION_3 to the version enum
- curl.h: fix outdated comment
- curl: cap the maximum allowed values for retry time arguments
- curl: handle a libcurl build without netrc support
- curl: make use of CURLINFO_RETRY_AFTER when retrying
- curl: remove outdated comment
- curl: use .curlrc (with a dot) on Windows
- curl: use CURLINFO_PROTOCOL to check for HTTP(s)
- curl_global_init_mem.3: mention it was added in 7.12.0
- curl_version: bump string buffer size to 250
- curl_version_info.3: mentioned ALTSVC and HTTP3
- curl_version_info: offer quic (and h3) library info
- curl_version_info: provide nghttp2 details
- defines: avoid underscore-prefixed defines
- docs/ALTSVC: remove what works and the experimental explanation
- docs/EXPERIMENTAL: explain what it means and what's experimental now
- docs/MANUAL.md: converted to markdown from plain text
- docs/examples/curlx: fix errors
- docs: s/curl_debug/curl_dbg_debug in comments and docs
- easy: resize receive buffer on easy handle reset
- examples: Avoid reserved names in hiperfifo examples
- examples: add http3.c, altsvc.c and http3-present.c
- getenv: support up to 4K environment variable contents on windows
- http09: disable HTTP/0.9 by default in both tool and library
- http2: when marked for closure and wanted to close == OK
- http2_recv: trigger another read when the last data is returned
- http: fix use of credentials from URL when using HTTP proxy
- http_negotiate: improve handling of gss_init_sec_context() failures
- md4: Use our own MD4 when no crypto libraries are available
- multi: call detach_connection before Curl_disconnect
- netrc: make the code try ".netrc" on Windows
- nss: use TLSv1.3 as default if supported
- openssl: build warning free with boringssl
- openssl: use SSL_CTX_set__proto_version() when available
- plan9: add support for running on Plan 9
- progress: reset download/uploaded counter between transfers
- readwrite_data: repair setting the TIMER_STARTTRANSFER stamp
- scp: fix directory name length used in memcpy
- smb: init *msg to NULL in smb_send_and_recv()
- smtp: check for and bail out on too short EHLO response
- source: remove names from source comments
- spnego_sspi: add typecast to fix build warning
- src/makefile: fix uncompressed hugehelp.c generation
- ssh-libssh: do not specify O_APPEND when not in append mode
- ssh: move code into vssh for SSH backends
- sspi: fix memory leaks
- tests: Replace outdated test case numbering documentation
- tftp: return error when packet is too small for options
- timediff: make it 64 bit (if possible) even with 32 bit time_t
- travis: reduce number of torture tests in 'coverage'
- url: make use of new HTTP version if alt-svc has one
- urlapi: verify the IPv6 numerical address
- urldata: avoid 'generic', use dedicated pointers
- vauth: Use CURLE_AUTH_ERROR for auth function errors
更新時間：2019-09-11
更新細節：
What's new in this version:
Added:
- dialog Go To allows negative line numbers and negative values in %, this goes relative to file end (like VS Code)
- lexer parser optimizations: now parsing of big files is ~30% faster
- minimap highlightes entire lines with selections, with theme color "current line BG" (similar to VS Code)
Fixed:
- on big files (lot of folding ranges), program had big slowdown on text editing
更新時間：2019-09-04
更新細節：
What's new in this version:
Changed:
- Windows build upgraded to Python 3.6, option "pylib" (on Windows) is now ignored
Added:
- Windows build: added support for Python 3.4...3.8; the existing python3x.dll with latest number from app folder is used
- Windows build: Addon Manager has packages "Windows Python37 32-bit" and "... 64-bit"; after installing one of them, and app restart, app will use Python 3.7
- drag&drop from Windows Explorer to floating groups (f1, f2, f3)
- Char Map dialog has hotkeys Ctrl+Up, Ctrl+Down to change combobox choice
- plugins "Terminal", "Find in Files": input fields consider option "ui_active_border": true
- lexer JavaScript: code-tree supports function/class names with Unicode and $ char
- lexer "Batch files" improved
Fixed:
- macOS: wrong display of menu-dialogs (if nagative font size in user.json)
更新時間：2019-08-27
更新細節：
What's new in this version:
- Fix bug when closing VST effect
- Fix bug during AU compatibility check
更新時間：2019-08-22
更新細節：
What's new in this version:
- Updated to core 3.2.4
- Fixed an issue in WinTrust (part 2)
- Fixed possible deadlock while enumerating processes
- Fixed SearchStrings method
- Signatures 20190819_114745
- Added new Scan locations
- Fixed an issue with ACLs where config files may not be properly saved
- Fixed portable_license CLI parameter
- Fixed low privilege Shell extension registration
- Fixed scheduler reload
- Fixed MalPE threshhold
- Fixed Wintrust scan (slow)
- Added signatures package integrity check
- Fixed MalPE detection name (negatives values sometimes)
- Fixed issue with Bad.Extension detection
更新時間：2019-08-20
更新細節：
What's new in this version:
SuperAntiSpyware 8.0.0.1042
- Change log not available for this version
SuperAntiSpyware 8.0.0.1038
- Service release
- Misc. bug fixes
SuperAntiSpyware 8.0.0.1034
- Change log not available for this version
SuperAntiSpyware 8.0.0.1032
- Change log not available for this version
SuperAntiSpyware 8.0.0.1030
- Change log not available for this version
SuperAntiSpyware 8.0.0.1028
- Added check box to Startup Item Added toaster to allow a user to disable the notification
- Fixed a possible bug that may affect the spoofed file detection when using direct disk scanning
- Misc. minor bug fixes
SuperAntiSpyware 8.0.0.1026
- Change log not available for this version
SuperAntiSpyware 8.0.0.1024
- Updated Look & Feel: Updated visuals and design that creates a cohesive experience with the updated website
- Alerts When Programs are Added to Start Up: Notifies users when new programs have been added to Windows startup locations or load points
- Scan For Hijacked Shortcuts: Warns users of a hijacked browser shortcut from the desktop
- Repair Tools: Enables users to restore PC system and configuration settings that have been damaged from malware
- Do Not Disturb PC Mode: Allows users to turn off SAS notifications when playing a game or watching a movie
SuperAntiSpyware 6.0.1264
- Misc. bug fixes
- Improvements to in-product performance and quality assurance telemetry
SuperAntiSpyware 6.0.1262
- Change log not available for this version
SuperAntiSpyware 6.0.1260
- Change log not available for this version
SuperAntiSpyware 6.0.1258
- Fixed cookie detection issue affecting Internet Explorer
SuperAntiSpyware 6.0.1254
- Change log not available for this version
SuperAntiSpyware 6.0.1252
- Service release
- Various bug fixes
SuperAntiSpyware 6.0.1250
- Service release
- Misc. bug fixes
SuperAntiSpyware 6.0.1248
- Change log not available for this version
SuperAntiSpyware 6.0.1244
Technology Changes:
- Service release
- Update corporate HQ address on the Help screen
- Misc. bug fixes
SuperAntiSpyware 6.0.1242
- Service release
- Various bug fixes
SuperAntiSpyware 6.0.1240
- Change log not available for this version
SuperAntiSpyware 6.0.1236
- Change log not available for this version
SuperAntiSpyware 6.0.1232
- Change log not available for this version
SuperAntiSpyware 6.0.1230
- Fix for Edge browser cookie detection on Windows 10 Anniversary
- Various other bug fixes
SuperAntiSpyware 6.0.1228
- Change log not available for this version
SuperAntiSpyware 6.0.1226
- Change log not available for this version
SuperAntiSpyware 6.0.1224
- Change log not available for this version
更新時間：2019-08-20
更新細節：
What's new in this version:
EMCO Ping Monitor Free 7.0.7
System state overview:
- There is a new view in the program that provides you with an overview of the current state of the monitored hosts. There you can see the number of the monitored, non-monitored and paused hosts. The same view shows the total number of the monitored hosts in different states (Up and Down) and with a different connection quality (Good, Warning, Bad and Critical). All numbers are clickable, so you can navigate to the hosts with the selected Activity, State or Quality
System state overview:
- Connection quality tracking
- In addition to the host state monitoring, the program can now monitor the connection quality for the monitored hosts, so you can see it on screen and get notifications when the connection quality changes. The connection quality is determined using the packet loss, latency percentile and jitter metrics to show the quality as Good, Warning, Bad or Critical
Connection quality tracking:
- State and quality monitors
- Using the State and Quality Monitors, which are available in the Enterprise edition of the program, you can see the states and the connection quality of all the monitored hosts on a single screen. Those views are designed for control rooms where the monitored hosts should be represented in a compact form while their state and quality are displayed by means of different colors. It is possible to sort and filter the displayed data to show hosts with the required characteristics only
State and quality monitors:
- Determining the host performance and displaying statistics for a selected period
- You can select the required period and get information on the host performance and statistics for the selected period. The host performance is determined using the uptime, packet loss, latency, CV, MOS and other metrics. The collected metrics are displayed in charts where you can see how they change over time. You can also get information about the number of outages and the periods when the host was in a different state or had varying quality characteristics during a selected period
- Determining the host performance and displaying statistics for a selected period
Improved monitoring web interface:
- The web interface, which is available in the Enterprise edition of the program, has been significantly improved. It now allows seeing all monitoring data and statistics though the web without opening a GUI client. The new web interface allows starting and stopping monitoring for hosts and groups.
Improved notifications:
- In addition to the host state notifications, now it is possible to send notifications when the connection quality changes. You can configure multiple notifications for every event in the updated notification settings dialog in Preferences. For example, you can send e-mail notifications and execute custom actions such as Windows commands, scripts or executables. To reduce the number of notifications, it is possible to group messages into one e-mail within a specified time interval, or group multiple events into one e-mail for every host
Host timeline and raw ping data exporting:
- Using the new Timeline view, you can see raw ping replies for a selected period and the host state and quality for the same period. That data is displayed on charts, so you can see how they change over time. If you wish, you can export raw ping data into a CSV file and open it in an external program.
Host timeline and raw ping data exporting:
- Hosts filtering in reports
- The reports configuration now includes a filter that can be used to filter report host members. You may specify that the report should only include the hosts that meet the condition
EMCO Ping Monitor Free 7.0.6
System state overview:
- There is a new view in the program that provides you with an overview of the current state of the monitored hosts. There you can see the number of the monitored, non-monitored and paused hosts. The same view shows the total number of the monitored hosts in different states (Up and Down) and with a different connection quality (Good, Warning, Bad and Critical). All numbers are clickable, so you can navigate to the hosts with the selected Activity, State or Quality
Connection quality tracking:
- In addition to the host state monitoring, the program can now monitor the connection quality for the monitored hosts, so you can see it on screen and get notifications when the connection quality changes. The connection quality is determined using the packet loss, latency percentile and jitter metrics to show the quality as Good, Warning, Bad or Critical
State and quality monitors:
- Using the State and Quality Monitors, which are available in the Enterprise edition of the program, you can see the states and the connection quality of all the monitored hosts on a single screen. Those views are designed for control rooms where the monitored hosts should be represented in a compact form while their state and quality are displayed by means of different colors. It is possible to sort and filter the displayed data to show hosts with the required characteristics only
Determining the host performance and displaying statistics for a selected period:
- You can select the required period and get information on the host performance and statistics for the selected period. The host performance is determined using the uptime, packet loss, latency, CV, MOS and other metrics. The collected metrics are displayed in charts where you can see how they change over time. You can also get information about the number of outages and the periods when the host was in a different state or had varying quality characteristics during a selected period
Improved monitoring web interface:
- The web interface, which is available in the Enterprise edition of the program, has been significantly improved. It now allows seeing all monitoring data and statistics though the web without opening a GUI client. The new web interface allows starting and stopping monitoring for hosts and groups
Improved notifications:
- In addition to the host state notifications, now it is possible to send notifications when the connection quality changes. You can configure multiple notifications for every event in the updated notification settings dialog in Preferences. For example, you can send e-mail notifications and execute custom actions such as Windows commands, scripts or executables. To reduce the number of notifications, it is possible to group messages into one e-mail within a specified time interval, or group multiple events into one e-mail for every host
Host timeline and raw ping data exporting:
- Using the new Timeline view, you can see raw ping replies for a selected period and the host state and quality for the same period. That data is displayed on charts, so you can see how they change over time. If you wish, you can export raw ping data into a CSV file and open it in an external program
Hosts filtering in reports:
The reports configuration now includes a filter that can be used to filter report host members. You may specify that the report should only include the hosts that meet the condition
EMCO Ping Monitor Free 6.3.2
- The program now supports Microsoft Windows 10 build 1903
- The program can work with mail servers that require TLS 1.1 and TLS 1.2 encryption
EMCO Ping Monitor Free 6.2.1
New and improved features:
- Significantly optimized the server startup routine to avoid the service timeout issues on specific PCs
- Optimized user and group principals handling when configuring and applying permissions
Resolved issues:
- The fatal error occurs when trying to generate a detailed report or display a historical data chart on PCs with explicitly disabled DST
- The state and status column filter conditions are not restored from layout
更新時間：2019-08-20
更新細節：
更新時間：2019-08-20
更新細節：
更新時間：2019-08-20
更新細節：
What's new in this version:
DearMob iPhone Manager 3.5
- Change log not available for this version
DearMob iPhone Manager 3.3
- Change log not available for this version
DearMob iPhone Manager 3.2
- Change log not available for this version
DearMob iPhone Manager 3.1
- Change log not available for this version
DearMob iPhone Manager 3.0
- Change log not available for this version