Speedify 歷史版本列表
更新時間：2021-01-06
更新細節：
What's new in this version:
ImageMagick 7.0.10-56 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-55 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-53 (64-bit)
- Release ImageMagick version 7.0.10-53
ImageMagick 7.0.10-52 (64-bit)
- return alpha bytes with stream utility
- percentage -border in x no longer adds one pixel border in y
ImageMagick 7.0.10-51 (64-bit)
- reduce time to identify PDF/PS/XPS/PCL image width/height
ImageMagick 7.0.10-50 (64-bit)
- revert patch to ready gray alpha TIFF image
ImageMagick 7.0.10-49 (64-bit)
- correct previous patch to read planar RGB TIFF images
ImageMagick 7.0.10-48 (64-bit)
- Repair unit test failures
ImageMagick 7.0.10-47 (64-bit)
- support YAML image format
- use generic TIFF read method for LZW-compressed strips
ImageMagick 7.0.10-46 (64-bit)
- possible TIFF related-heap buffer overflow
- set default system fault in policy.xml configuration file
- support portable float map format 16-bit half
ImageMagick 7.0.10-45 (64-bit)
- added support for the farbfeld format
ImageMagick 7.0.10-44 (64-bit)
- correct reading of first row in TIFF decoder
ImageMagick 7.0.10-43 (64-bit)
- add padding to AcquirePolicyString()
ImageMagick 7.0.10-42 (64-bit)
- revert memory patch to avert possible thread lock
- add support for FilmLight FL32 image format
ImageMagick 7.0.10-41 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-39 (64-bit)
- support DPX 4:2:2 sampling.
- fix shell injection vulnerability via the -authenticate option
ImageMagick 7.0.10-38 (64-bit)
- add image settings support to -fx
- better support for TIFF YCbCr photometric
- verify TTF glyph format before dereferencing
- force single HEIC image per container
ImageMagick 7.0.10-37 (64-bit)
- correct soversioning
ImageMagick 7.0.10-35 (64-bit)
- Prefer ffmpeg over avconv
- Support median image statistic and median property
- Add -extend option to {display,animate,import}
ImageMagick 7.0.10-34 (64-bit)
- Check for linux-compatible sendfile()
ImageMagick 7.0.10-33 (64-bit)
- miscellaneous clean-up
ImageMagick 7.0.10-32 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-31 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-30 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-29 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-28 (64-bit)
- Distorted clip path after -extent
- Paths in Photoshop EPS files are corrupted on conversion
ImageMagick 7.0.10-27 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-26 (64-bit)
- Add animated webp blend method support
- Add support for OpenRaster (.ora) image format
- Paths in Photoshop EPS files are no longer corrupted
ImageMagick 7.0.10-25 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-24 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-23 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-22 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-21 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-20 (64-bit)
- Fix out-of-bounds vulnerability when reading sixel images
ImageMagick 7.0.10-19 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-18 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-17 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-16 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-15 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-14 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-13 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-12 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-11 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-10 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-9 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-8 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-7 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-6 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-5 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-3 (64-bit)
- The -charcoal option should ignore the alpha channel
- Fix numerical instability issue when drawing lines
- Improve mono font rendering
ImageMagick 7.0.10-2 (64-bit)
- Change log not available for this version
ImageMagick 7.0.10-1 (64-bit)
- Add support for returning the convex hull of an image with the %[canvas-hull] property.Added option to specify the preferred version when writing a PDF file with -define pdf:version=version (e.g. 1.7)
- Do not throw exception on empty draw path
- Fix possible buffer overflow in ComplexImages()
- SVG to MVG requires transforms to appear before clipping paths
ImageMagick 7.0.10-0 (64-bit)
- Label text no longer gets cut-off
- Prevent heap overflow
ImageMagick 7.0.9-27 (64-bit)
- No percent sign in lab() color
- Introducing the -color-threshold command-line option
- Handle out of range HDRI values for -statistic option
- Fix improper casting when computing image signature
ImageMagick 7.0.9-26 (64-bit)
- No percent sign in lab() color
- Introducing the -color-threshold command-line option
- Handle out of range HDRI values for -statistic option
- Fix improper casting when computing image signature
ImageMagick 7.0.9-25 (64-bit)
- Adapt to a change in command-line options in the SVG inkscape delegate
- No percent sign in lab() color
ImageMagick 7.0.9-24 (64-bit)
- Support connected-components:eccentricity-threshold, connected-components:major-axis-threshold, connected-components:minor-axis-threshold, connected-components:angle-threshold
- Set the alpha channel if the write mask is not enabled
- Corrected ellipse orientation when computing image moments
ImageMagick 7.0.9-23 (64-bit)
- Report gray(127.5) as gray(50%).
- Support -define connected-components:perimeter-threshold=min-max
ImageMagick 7.0.9-22 (64-bit)
- More work on connect components, e.g. keep-colors, remove-colors, keep-topids
- Initialize mutex before locking if its not already initialized
ImageMagick 7.0.9-21 (64-bit)
- Change log not available for this version
ImageMagick 7.0.9-20 (64-bit)
- Support addition connected components defines
- Refresh cache morphology when writing MPC images
ImageMagick 7.0.9-19 (64-bit)
- Make PNG creation reproducible (reference https://github.com/ImageMagick/ImageMagick/pull/1270)
- Refactor uninitialize variable patch for -fx "while(,)" expression
ImageMagick 7.0.9-17 (64-bit)
- Allow larger negative interline spacing
- Conditional compile for huge xml pages for RSVG delegate library
- Put "width" property in the PNG namespace
- combine -colorspace sRGB no longer returns grayscale output
- Support Jzazbz colorspace
ImageMagick 7.0.9-16 (64-bit)
- Change log not available for this version
ImageMagick 7.0.9-14 (64-bit)
- Support extended Fx assignment operators (e.g. *=, /=, ++, --, etc.)
- Support Fx for() iterator
- Optimize Fx performance
- Ensure circle.rb renders the same for IMv6 and IMv7
ImageMagick 7.0.9-12 (64-bit)
- Fix Build failure with MinGW-w64 (reference https://github.com/ImageMagick/ImageMagick6/issues/67)
- Inject image profile properties immediately after the image is read
ImageMagick 7.0.9-11 (64-bit)
- Replace pseudo-random number generator with a Xoshiro generator
- The -layers optimize option requires a fully transparent previous image
ImageMagick 7.0.9-10 (64-bit)
- Some clang releases do not support _aligned_alloc()
- Support -kmeans command-line option
ImageMagick 7.0.9-9 (64-bit)
- Build file clean-up
- Improve semaphore handling
- Introduce HeapOverflowSanityCheckGetExtent() method
- The -layers optimize option requires a fully transparent previous image
ImageMagick 7.0.9-7 (64-bit)
- Support Pocketmod image format
- Fixed numerous issues
ImageMagick 7.0.9-6 (64-bit)
- Increase the maximum number of bezier coordinates (reference https://github.com/ImageMagick/ImageMagick/issues/1784)
- Santize "'" from SHOW and WIN delegates under Linux, '"' for Windows (thanks to Enzo Puig)
- Correct for TGA orientation (reference https://imagemagick.org/discourse-server/viewtopic.php?f=3&t=34757)
- The result for -compose Copy -extent on a MYK image is CMYK (reference https://imagemagick.org/discourse-server/viewtopic.php?f=3&t=37118)
- Fix potential buffer overflow when reading a fax image (alert from Justin)
- Support dng:use-camera-wb option
ImageMagick 7.0.9-5 (64-bit)
- Ensure Ascii85 compression is thread safe
- Fixed numerous issues posted to GitHub
ImageMagick 7.0.9-4 (64-bit)
- Change log not available for this version
ImageMagick 7.0.9-3 (64-bit)
- Santize ';' from SHOW and WIN delegates
- Add exception parameter to CMS transform methods
- Output exception there is an attempt to perform an operation not allowed by the security policy
- Fixed numerous issues posted to GitHub
ImageMagick 7.0.9-2 (64-bit)
- Change log not available for this version
ImageMagick 7.0.9-1 (64-bit)
- Change log not available for this version
ImageMagick 7.0.8-68 (64-bit)
- Support animated WebP encoding/decoding
- Text stroke cut off
- Adds support for lossless JPEG1 recompression
ImageMagick 7.0.8-67 (64-bit)
- Line endings renedered as empty boxes
ImageMagick 7.0.8-66 (64-bit)
- Change log not available for this version
ImageMagick 7.0.8-65 (64-bit)
- Eliminate fault when trace delegate is not available.
- Properly distinquish linear and non-linear gray colorspaces
ImageMagick 7.0.8-64 (64-bit)
- Change log not available for this version
ImageMagick 7.0.8-63 (64-bit)
- Properly identify the DNG and AI image format
ImageMagick 7.0.8-62 (64-bit)
- Added option to limit the maximum point size with -define caption:max-pointsize=pointsize
- Corrected JP2 numresolution calculation
ImageMagick 7.0.8-61 (64-bit)
- Fixed an issue with -background and -swirl
ImageMagick 7.0.8-60 (64-bit)
- Enable reading EXR image file from stdin
ImageMagick 7.0.8-59 (64-bit)
- Change log not available for this version
ImageMagick 7.0.8-58 (64-bit)
- Improve GetNextToken() performance
ImageMagick 7.0.8-56 (64-bit)
- Unexpected -alpha shape results
- Converting from PDF to PBM inverts the image
更新時間：2020-12-20
更新細節：
What's new in this version:
- Optimize the FOCUS feature to make it smoother under multiple displays
- Support for wider color temperatures (0k-1000k)
- Enhance the stability of the program
更新時間：2020-12-19
更新細節：
What's new in this version:
Speedify 10.8.0
- Fixed a bug with DNS selection changes made while Speedify is disconnected
- UI: Fixed a bug with connection colors not updating correctly
- Connection screen now displays numerical MOS score in addition to star rating
- DNS requests for bypassed services now also automatically bypass the VPN
- Desktop: Users can now add custom domains to bypass the VPN from the CLI using the command: speedify_cli streamingbypass domains add
- Stop UI GPU usage when the UI is minimized
- Fix a bug with creating multiple entries for the Speedify tray icon in settings
Speedify 10.7.2
Improvements:
- Fixes slow speeds when used with Connectify Hotspot
- Fixes WebView2 Runtime installation errors
Speedify 10.7.1
- Change log not available for this version
Speedify 10.7.0
New:
- Premium Servers: Users with unlimited accounts now have access to additional servers in popular locations worldwide
- New Statistic - “Streamergency Saves”: Keep track of the number of times Speedify has intervened to prevent streaming emergencies
- Header Compression: By default, Speedify will now shrink the headers on data packets to reduce network overhead and data usage. This can lead to increased performance with online games, VoIP, and video conferencing
- UI Optimization: Under the hood we’ve further optimized our CPU utilization to increase performance and decrease power draw
Speedify 10.6.0
- Improved server selection screen with a new section for recent server selections
- The settings menu no longer automatically appears on large screens
- Improved automatic server selection to reduce "server is full" errors
- Faster transitions back to Primary connection from Secondary connections
Speedify 10.4.1
- Change log not available for this version
Speedify 10.4.0
- Change log not available for this version
Speedify 10.3.1
- Change log not available for this version
Speedify 10.3.0
- Change log not available for this version
Speedify 10.2.0
- Change log not available for this version
Speedify 10.1.0
- Change log not available for this version
Speedify 10.0.1
- Change log not available for this version
Speedify 10.0.0
- Change log not available for this version
Speedify 9.9.0
- Change log not available for this version
Speedify 9.8.0
- Change log not available for this version
Speedify 9.7.0
- Streaming Mode is now the default Bonding Mode for new Speedify users. For existing users, you will have to enable it
- Improved statistics for Streaming mode
- Command line interface (CLI) is back on macOS
- Fixed an issue with notifications where users could not turn them off
Speedify 9.6.1
- Change log not available for this version
Speedify 9.6.0
- Fix issues with IPv6 only cellular connections not connecting
- Fix issue with TCP and HTTPS transports sometimes not connecting
- Updated Wi-Fi signal strength monitoring. Speedify will be able to better predict when a network change will happen, so it can perform better
Speedify 9.5.0
- Change log not available for this version
Speedify 9.4.0
Enhancements to Streaming Bypass:
- Streaming Bypass now supports more services including Netflix, HBO Go, Hulu, and Disney+
Battery usage:
- Power consumption is noticeably improved, especially during periods with low/idle usage
Speedify 9.3.0
- Change log not available for this version
Speedify 9.2.1
- Change log not available for this version
Speedify 9.1.2
New:
- Performance fixes for some types of Internet connections – we listen to your feedback and constantly optimize the performance
- Fix for slow DNS with DNS leak protection when internet connections have low interface metrics (Windows)
- Ensure that Internet Kill Switch cannot be confused by changing networks (Windows)
- Fixed settings reconnect (iOS)
- Fixed some Killswitch reconnect situations (iOS)
Speedify 9.0.0
New Universal Menu System:
- you will get by within the app much more easier with the restructured menu
Improved Support for Captive Portals (Windows, macOS and Linux):
- now you don’t have to disconnect your VPN to access the Wi-Fi network login page
- Various fixes and improvements to ensure Speedify is running smoothly on your computer or mobile device
Speedify 8.2.1
- Change log not available for this version
Speedify 8.2.0
- Added support for HTTPS transport connections on iOS
- Performance improvements for several uncommon situations so you get the best Internet no matter what
Speedify 8.1.4
- Change log not available for this version
Speedify 8.1.2
- Change log not available for this version
Speedify 8.1.1
- Change log not available for this version
Speedify 8.1.0
- Change log not available for this version
Speedify 8.0.2
- Change log not available for this version
Speedify 7.8.3
- Change log not available for this version
Speedify 7.8.2
New Features and Improvements:
- Performance improvements for some channel bonding combinations
- Stability fixes
- Windows: new internal store where users can purchase subscriptions directly in the Speedify app
Speedify 7.8
- Performance improvements for some channel bonding combinations
- Stability fixes
- New internal store where users can purchase subscriptions directly in the Speedify app
Speedify 7.7.1
- Reduced battery and CPU usage across all platforms
- Speedify SDK
- Reduced client power usage by reducing wakeups
- Reduced server side CPU required by idle users
- Reduced server side memory by ensuring services only run when required
Speedify 7.7.0
- Change log not available for this version
Speedify 7.6.1
- Change log not available for this version
Speedify 7.6.0
- New command line interface: Nearly everything the user interface can do is now allowed through the command line
- Fixed an issue where networks could sometimes be incorrectly ignored by Speedify
- Fixed an issue that sometimes caused either multiple Speedify adapters or no Speedify adapters to be installed
Speedify 7.5.1
- Change log not available for this version
Speedify 7.4.0
New:
- DNS Control: Set the DNS server used for your VPN connection. Choose from Cloudflare, AdGuard, OpenDNS, Google DNS, and more!
- Stability and performance improvements
Speedify 7.2.9
- Change log not available for this version
Speedify 7.2.4
- Change log not available for this version
Speedify 7.2.0
- Change log not available for this version
Speedify 7.1.4
- Change log not available for this version
Speedify 7.1.3 Build 6030
New Features:
- Improved performance on lossy networks
- All new, redesigned test speed functionality, with trouble-shooting messages and performance suggestions
IOS:
- Improved app launch time
- Improved connection stability
Speedify 7.0.7.5
- Change log not available for this version
Speedify 7.0.5 Build 5722
- Change log not available for this version
Speedify 7.0.2 Build 5693
New Features in Speedify 7.0:
- Clean and modern dashboard that lets you see what connections you are using and how well they are performing
- The ability to see Channel Bonding in action–thanks to animated Connection Bubbles that radiate color when they’re being used
- Simplified animated introduction for streamlined onboarding
- Speedify for Teams Update: More ports available for Port Forwarding on Dedicated Servers
- Improved filtering of slow connections
SPEEDIFY 7.0 FOR ANDROID:
- Option not to disconnect when closing Speedify from Recents Screen
SPEEDIFY 7.0 FOR IOS:
- Extensive support for iOS 12, including Siri Shortcuts, Rich Notifications, and Keychain integration
- Network: Use new iOS 12 networking APIs for better flexibility and performance
- Improved look on iPhone X, XS, XS Max, and XR
SPEEDIFY 7.0 FOR WINDOWS:
- Option not to disconnect when closing Speedify UI
- Many more options on the command line interface (speedify_cli); has feature parity with the user interface
SPEEDIFY 7.0 FOR MAC:
- Many more options on the command line interface (speedify_cli); has feature parity with the user interface
Speedify 6.3.5 Build 5525
- Opportunity for users running iOS 12 to download our upcoming beta versions
- The “Switch Accounts” option has been changed to “Sign Out”
- More complete language translations for macOS
- Small user interface improvements
- Bug fixes
Speedify 6.3.2 Build 5457
New:
- GDPR Compliance: Speedify is now GDPR compliant. We have updated our privacy policy with new rights and policies
- Speed Improvements: Adjustments to connection bonding algorithm for slower speed connections (those < 1 Mbps)
- Performance improvements and bug fixes
Speedify 6.3.0 Build 5403
- Change log not available for this version
Speedify 6.2.0 Build 5344
- Change log not available for this version
Speedify 6.1.0 Build 5285
New:
- All operating systems: Performance Improvements: Improves performance in certain bonding scenarios
- All operating systems: Security Improvements: Updated to latest BoringSSL, which brings many fixes and improvements to our encryption engine
- Windows: Improved Internet Kill Switch: We’ve improved the behavior and messaging around the Internet Kill Switch. When activated, it ensures that Speedify stays connected, and other programs are blocked from accessing the Internet if Speedify is disconnected. If security is your top concern, this setting will keep you from ever accidently going online without the protection of Speedify”s VPN. To activate, go to Settings > Privacy > Internet Kill Switch
- Android: Android Oreo, Speedify notifications can now be managed individually from Android’s Notification settings
- Android: Fixed issue with clicking on settings on TV devices
- Android: Fixed issues restoring old purchases
- Android: Android KitKat (4.4) is no longer supported. KitKat users can still use Speedify 6.0
- iOS: Hardware accelerated encryption: Speedify now uses hardware acceleration for encryption, on iPhone 5S or later devices. On fast Internet connections, this can a big speed up
- iOS: Internet Kill Switch: In Settings > Privacy, Speedify now has an Internet Kill Switch. When activated, it ensures that Speedify stays connected, and other programs are blocked from accessing the internet if Speedify is disconnected. If security is your top concern, this setting will keep you from ever accidently going online without the protection of Speedify’s VPN
Speedify 6.0.1 Build 5229
- Change log not available for this version
Speedify 6.0.0 Build 5229
- Change log not available for this version
Speedify 6.0.0 Build 5225
- Change log not available for this version
Speedify 5.9.0 Build 5132
- Improved Settings UI
- Android: The VPN now runs in a separate process to improve reliability on devices with low memory
- Windows: Fix issue with non-Internet adapters showing in Speedify interface
- Command Line Interface: Add support for “connectmethod” to control whether to connect to fastest, dedicated, P2P or a particular country
Speedify 5.8.0 Build 5007
- Change log not available for this version
Speedify 5.7.1 Build 4958
- Change log not available for this version
Speedify 5.7.0 Build 4937
- Change log not available for this version
Speedify 5.6.2 Build 4903
- Change log not available for this version
Speedify 5.6.1 Build 4886
- Change log not available for this version
Speedify 5.6.0 Build 4865
- Rate Limiting: In the connection’s settings there is now an optional Rate Limit. When set this will prevent the connection from going faster on average than the speed you select. Why would you want to slow down your internet? Most people won’t want to, of course, but if you are trying to not use too much of an expensive cellular or satellite connection, then this could be a real money saver
Performance Improvements:
- Reduces the amount of latency that Speedify introduces into the network and over the Speedify tunnel
User Interface Improvements:
- Improved color palette on connections to avoid hard to read combinations. On the Desktop versions, when you only have one connection, a new faux connection called “Add Connection” appears which when clicked on offers guidance on how to set up new internet connections
Speedify 5.5.5 Build 4793
- Change log not available for this version
Speedify 5.5.3 Build 4760
- Change log not available for this version
Speedify 5.5.1 Build 4755
- Change log not available for this version
Speedify 5.5.0 Build 4715
- Change log not available for this version
Speedify 5.5.0 Build 4690
- Change log not available for this version
更新時間：2020-12-19
更新細節：
更新時間：2020-12-15
更新細節：
What's new in this version:
New Features and Additions:
- Added Virtual Camera output on macOS
- Added Virtual Camera output on Linux (requires v4l2loopback-dkms)
- Added the ability to use a separate audio track for the VOD when using Twitch
- If using Simple output mode, enable "Enable Advanced Encoder Settings", and enable "Twitch VOD Track (Uses Track 2)". Twitch VOD output will then be on audio track 2
- If using Advanced output mode in the Streaming tab, enable "Twitch VOD Track" and select the track you'd like to use for it
- Special thanks to Twitch for assisting during the development of this feature
- Added OpenBSD support
- Added the ability to ingest captions coming from Decklink devices via "Decklink Captions" from the Tools menu
- Added hardware decoding options for stinger transitions
- Added an option to duplicate filters in the right-click context menu of filters
- Added ability to copy and paste a single filter between sources
- Added HLS support and ingests for YouTube
- Added a Replay buffer save event to the frontend API
Improvements/Tweaks:
- Updated dependencies on Windows and macOS (such as x264 and Qt) to their latest versions for the latest performance improvements
- On Linux, the program will now detect other instances that are currently running and warn the user about running more than one copies at a time
- When creating a new profile, you will be now be given the option to run the auto-configuration wizard
- Changed the “Enforce Streaming Service Bitrate” to “Ignore streaming service setting recommendations”, moved it to the Streaming section of the Settings window, and made it so it now affects both Simple and Advanced output modes.
- Maximum limitations for streaming services are now shown in the Streaming section of the Settings window
- Streaming services may now apply resolution and framerate limits on streams to their services
Fixed:
- Fixed a bug where the "Save Replay" button would stay highlighted after being clicked
- Fixed a bug where the Media source would have unusual lag playing back certain media files (particularly WMV files)
- Fixed an issue where Facebook streaming would allow you to select resolutions/framerates that aren't supported
- Fixed certain connection issues with SRT/mpegts
- Fixed a bug where you could disable the Replay Buffer even if it was currently active
- Fixed a bug where renaming a source would not return keyboard/mouse focus back to the list
- Fixed an issue where ‘Paste Filters’ on sources didn't work in all situations
- Fixed an issue where Virtual Camera & Source Toolbar hotkeys would be duplicated when switching profiles
- Fixed an issue with removing signal handlers in Lua
- Fixed a potential hang when repeatedly selecting and deselecting display capture sources on Windows
- Fixed an issue where the replay buffer could use settings from CQP mode in CBR mode
- Fixed an issue where certain recordings could not be remuxed (typically from the QSV encoder)
更新時間：2020-12-08
更新細節：
更新時間：2020-12-04
更新細節：
What's new in this version:
Speedify 10.7.1
- Change log not available for this version
Speedify 10.7.0
New:
- Premium Servers: Users with unlimited accounts now have access to additional servers in popular locations worldwide
- New Statistic - “Streamergency Saves”: Keep track of the number of times Speedify has intervened to prevent streaming emergencies
- Header Compression: By default, Speedify will now shrink the headers on data packets to reduce network overhead and data usage. This can lead to increased performance with online games, VoIP, and video conferencing
- UI Optimization: Under the hood we’ve further optimized our CPU utilization to increase performance and decrease power draw
Speedify 10.6.0
- Improved server selection screen with a new section for recent server selections
- The settings menu no longer automatically appears on large screens
- Improved automatic server selection to reduce "server is full" errors
- Faster transitions back to Primary connection from Secondary connections
Speedify 10.4.1
- Change log not available for this version
Speedify 10.4.0
- Change log not available for this version
Speedify 10.3.1
- Change log not available for this version
Speedify 10.3.0
- Change log not available for this version
Speedify 10.2.0
- Change log not available for this version
Speedify 10.1.0
- Change log not available for this version
Speedify 10.0.1
- Change log not available for this version
Speedify 10.0.0
- Change log not available for this version
Speedify 9.9.0
- Change log not available for this version
Speedify 9.8.0
- Change log not available for this version
Speedify 9.7.0
- Streaming Mode is now the default Bonding Mode for new Speedify users. For existing users, you will have to enable it
- Improved statistics for Streaming mode
- Command line interface (CLI) is back on macOS
- Fixed an issue with notifications where users could not turn them off
Speedify 9.6.1
- Change log not available for this version
Speedify 9.6.0
- Fix issues with IPv6 only cellular connections not connecting
- Fix issue with TCP and HTTPS transports sometimes not connecting
- Updated Wi-Fi signal strength monitoring. Speedify will be able to better predict when a network change will happen, so it can perform better
Speedify 9.5.0
- Change log not available for this version
Speedify 9.4.0
Enhancements to Streaming Bypass:
- Streaming Bypass now supports more services including Netflix, HBO Go, Hulu, and Disney+
Battery usage:
- Power consumption is noticeably improved, especially during periods with low/idle usage
Speedify 9.3.0
- Change log not available for this version
Speedify 9.2.1
- Change log not available for this version
Speedify 9.1.2
New:
- Performance fixes for some types of Internet connections – we listen to your feedback and constantly optimize the performance
- Fix for slow DNS with DNS leak protection when internet connections have low interface metrics (Windows)
- Ensure that Internet Kill Switch cannot be confused by changing networks (Windows)
- Fixed settings reconnect (iOS)
- Fixed some Killswitch reconnect situations (iOS)
Speedify 9.0.0
New Universal Menu System:
- you will get by within the app much more easier with the restructured menu
Improved Support for Captive Portals (Windows, macOS and Linux):
- now you don’t have to disconnect your VPN to access the Wi-Fi network login page
- Various fixes and improvements to ensure Speedify is running smoothly on your computer or mobile device
Speedify 8.2.1
- Change log not available for this version
Speedify 8.2.0
- Added support for HTTPS transport connections on iOS
- Performance improvements for several uncommon situations so you get the best Internet no matter what
Speedify 8.1.4
- Change log not available for this version
Speedify 8.1.2
- Change log not available for this version
Speedify 8.1.1
- Change log not available for this version
Speedify 8.1.0
- Change log not available for this version
Speedify 8.0.2
- Change log not available for this version
Speedify 7.8.3
- Change log not available for this version
Speedify 7.8.2
New Features and Improvements:
- Performance improvements for some channel bonding combinations
- Stability fixes
- Windows: new internal store where users can purchase subscriptions directly in the Speedify app
Speedify 7.8
- Performance improvements for some channel bonding combinations
- Stability fixes
- New internal store where users can purchase subscriptions directly in the Speedify app
Speedify 7.7.1
- Reduced battery and CPU usage across all platforms
- Speedify SDK
- Reduced client power usage by reducing wakeups
- Reduced server side CPU required by idle users
- Reduced server side memory by ensuring services only run when required
Speedify 7.7.0
- Change log not available for this version
Speedify 7.6.1
- Change log not available for this version
Speedify 7.6.0
- New command line interface: Nearly everything the user interface can do is now allowed through the command line
- Fixed an issue where networks could sometimes be incorrectly ignored by Speedify
- Fixed an issue that sometimes caused either multiple Speedify adapters or no Speedify adapters to be installed
Speedify 7.5.1
- Change log not available for this version
Speedify 7.4.0
New:
- DNS Control: Set the DNS server used for your VPN connection. Choose from Cloudflare, AdGuard, OpenDNS, Google DNS, and more!
- Stability and performance improvements
Speedify 7.2.9
- Change log not available for this version
Speedify 7.2.4
- Change log not available for this version
Speedify 7.2.0
- Change log not available for this version
Speedify 7.1.4
- Change log not available for this version
Speedify 7.1.3 Build 6030
New Features:
- Improved performance on lossy networks
- All new, redesigned test speed functionality, with trouble-shooting messages and performance suggestions
IOS:
- Improved app launch time
- Improved connection stability
Speedify 7.0.7.5
- Change log not available for this version
Speedify 7.0.5 Build 5722
- Change log not available for this version
Speedify 7.0.2 Build 5693
New Features in Speedify 7.0:
- Clean and modern dashboard that lets you see what connections you are using and how well they are performing
- The ability to see Channel Bonding in action–thanks to animated Connection Bubbles that radiate color when they’re being used
- Simplified animated introduction for streamlined onboarding
- Speedify for Teams Update: More ports available for Port Forwarding on Dedicated Servers
- Improved filtering of slow connections
SPEEDIFY 7.0 FOR ANDROID:
- Option not to disconnect when closing Speedify from Recents Screen
SPEEDIFY 7.0 FOR IOS:
- Extensive support for iOS 12, including Siri Shortcuts, Rich Notifications, and Keychain integration
- Network: Use new iOS 12 networking APIs for better flexibility and performance
- Improved look on iPhone X, XS, XS Max, and XR
SPEEDIFY 7.0 FOR WINDOWS:
- Option not to disconnect when closing Speedify UI
- Many more options on the command line interface (speedify_cli); has feature parity with the user interface
SPEEDIFY 7.0 FOR MAC:
- Many more options on the command line interface (speedify_cli); has feature parity with the user interface
Speedify 6.3.5 Build 5525
- Opportunity for users running iOS 12 to download our upcoming beta versions
- The “Switch Accounts” option has been changed to “Sign Out”
- More complete language translations for macOS
- Small user interface improvements
- Bug fixes
Speedify 6.3.2 Build 5457
New:
- GDPR Compliance: Speedify is now GDPR compliant. We have updated our privacy policy with new rights and policies
- Speed Improvements: Adjustments to connection bonding algorithm for slower speed connections (those < 1 Mbps)
- Performance improvements and bug fixes
Speedify 6.3.0 Build 5403
- Change log not available for this version
Speedify 6.2.0 Build 5344
- Change log not available for this version
Speedify 6.1.0 Build 5285
New:
- All operating systems: Performance Improvements: Improves performance in certain bonding scenarios
- All operating systems: Security Improvements: Updated to latest BoringSSL, which brings many fixes and improvements to our encryption engine
- Windows: Improved Internet Kill Switch: We’ve improved the behavior and messaging around the Internet Kill Switch. When activated, it ensures that Speedify stays connected, and other programs are blocked from accessing the Internet if Speedify is disconnected. If security is your top concern, this setting will keep you from ever accidently going online without the protection of Speedify”s VPN. To activate, go to Settings > Privacy > Internet Kill Switch
- Android: Android Oreo, Speedify notifications can now be managed individually from Android’s Notification settings
- Android: Fixed issue with clicking on settings on TV devices
- Android: Fixed issues restoring old purchases
- Android: Android KitKat (4.4) is no longer supported. KitKat users can still use Speedify 6.0
- iOS: Hardware accelerated encryption: Speedify now uses hardware acceleration for encryption, on iPhone 5S or later devices. On fast Internet connections, this can a big speed up
- iOS: Internet Kill Switch: In Settings > Privacy, Speedify now has an Internet Kill Switch. When activated, it ensures that Speedify stays connected, and other programs are blocked from accessing the internet if Speedify is disconnected. If security is your top concern, this setting will keep you from ever accidently going online without the protection of Speedify’s VPN
Speedify 6.0.1 Build 5229
- Change log not available for this version
Speedify 6.0.0 Build 5229
- Change log not available for this version
Speedify 6.0.0 Build 5225
- Change log not available for this version
Speedify 5.9.0 Build 5132
- Improved Settings UI
- Android: The VPN now runs in a separate process to improve reliability on devices with low memory
- Windows: Fix issue with non-Internet adapters showing in Speedify interface
- Command Line Interface: Add support for “connectmethod” to control whether to connect to fastest, dedicated, P2P or a particular country
Speedify 5.8.0 Build 5007
- Change log not available for this version
Speedify 5.7.1 Build 4958
- Change log not available for this version
Speedify 5.7.0 Build 4937
- Change log not available for this version
Speedify 5.6.2 Build 4903
- Change log not available for this version
Speedify 5.6.1 Build 4886
- Change log not available for this version
Speedify 5.6.0 Build 4865
- Rate Limiting: In the connection’s settings there is now an optional Rate Limit. When set this will prevent the connection from going faster on average than the speed you select. Why would you want to slow down your internet? Most people won’t want to, of course, but if you are trying to not use too much of an expensive cellular or satellite connection, then this could be a real money saver
Performance Improvements:
- Reduces the amount of latency that Speedify introduces into the network and over the Speedify tunnel
User Interface Improvements:
- Improved color palette on connections to avoid hard to read combinations. On the Desktop versions, when you only have one connection, a new faux connection called “Add Connection” appears which when clicked on offers guidance on how to set up new internet connections
Speedify 5.5.5 Build 4793
- Change log not available for this version
Speedify 5.5.3 Build 4760
- Change log not available for this version
Speedify 5.5.1 Build 4755
- Change log not available for this version
Speedify 5.5.0 Build 4715
- Change log not available for this version
Speedify 5.5.0 Build 4690
- Change log not available for this version
更新時間：2020-11-25
更新細節：
What's new in this version:
- Fixed an issue that may not work properly under windows xp
- Addresses an issue where the focus shortcut may may temporarily not be available
- Optimize program performance
更新時間：2020-11-20
更新細節：
更新時間：2020-11-19
更新細節：
What's new in this version:
Speedify 10.7.0
New:
- Premium Servers: Users with unlimited accounts now have access to additional servers in popular locations worldwide
- New Statistic - “Streamergency Saves”: Keep track of the number of times Speedify has intervened to prevent streaming emergencies
- Header Compression: By default, Speedify will now shrink the headers on data packets to reduce network overhead and data usage. This can lead to increased performance with online games, VoIP, and video conferencing
- UI Optimization: Under the hood we’ve further optimized our CPU utilization to increase performance and decrease power draw
Speedify 10.6.0
- Improved server selection screen with a new section for recent server selections
- The settings menu no longer automatically appears on large screens
- Improved automatic server selection to reduce "server is full" errors
- Faster transitions back to Primary connection from Secondary connections
Speedify 10.4.1
- Change log not available for this version
Speedify 10.4.0
- Change log not available for this version
Speedify 10.3.1
- Change log not available for this version
Speedify 10.3.0
- Change log not available for this version
Speedify 10.2.0
- Change log not available for this version
Speedify 10.1.0
- Change log not available for this version
Speedify 10.0.1
- Change log not available for this version
Speedify 10.0.0
- Change log not available for this version
Speedify 9.9.0
- Change log not available for this version
Speedify 9.8.0
- Change log not available for this version
Speedify 9.7.0
- Streaming Mode is now the default Bonding Mode for new Speedify users. For existing users, you will have to enable it
- Improved statistics for Streaming mode
- Command line interface (CLI) is back on macOS
- Fixed an issue with notifications where users could not turn them off
Speedify 9.6.1
- Change log not available for this version
Speedify 9.6.0
- Fix issues with IPv6 only cellular connections not connecting
- Fix issue with TCP and HTTPS transports sometimes not connecting
- Updated Wi-Fi signal strength monitoring. Speedify will be able to better predict when a network change will happen, so it can perform better
Speedify 9.5.0
- Change log not available for this version
Speedify 9.4.0
Enhancements to Streaming Bypass:
- Streaming Bypass now supports more services including Netflix, HBO Go, Hulu, and Disney+
Battery usage:
- Power consumption is noticeably improved, especially during periods with low/idle usage
Speedify 9.3.0
- Change log not available for this version
Speedify 9.2.1
- Change log not available for this version
Speedify 9.1.2
New:
- Performance fixes for some types of Internet connections – we listen to your feedback and constantly optimize the performance
- Fix for slow DNS with DNS leak protection when internet connections have low interface metrics (Windows)
- Ensure that Internet Kill Switch cannot be confused by changing networks (Windows)
- Fixed settings reconnect (iOS)
- Fixed some Killswitch reconnect situations (iOS)
Speedify 9.0.0
New Universal Menu System:
- you will get by within the app much more easier with the restructured menu
Improved Support for Captive Portals (Windows, macOS and Linux):
- now you don’t have to disconnect your VPN to access the Wi-Fi network login page
- Various fixes and improvements to ensure Speedify is running smoothly on your computer or mobile device
Speedify 8.2.1
- Change log not available for this version
Speedify 8.2.0
- Added support for HTTPS transport connections on iOS
- Performance improvements for several uncommon situations so you get the best Internet no matter what
Speedify 8.1.4
- Change log not available for this version
Speedify 8.1.2
- Change log not available for this version
Speedify 8.1.1
- Change log not available for this version
Speedify 8.1.0
- Change log not available for this version
Speedify 8.0.2
- Change log not available for this version
Speedify 7.8.3
- Change log not available for this version
Speedify 7.8.2
New Features and Improvements:
- Performance improvements for some channel bonding combinations
- Stability fixes
- Windows: new internal store where users can purchase subscriptions directly in the Speedify app
Speedify 7.8
- Performance improvements for some channel bonding combinations
- Stability fixes
- New internal store where users can purchase subscriptions directly in the Speedify app
Speedify 7.7.1
- Reduced battery and CPU usage across all platforms
- Speedify SDK
- Reduced client power usage by reducing wakeups
- Reduced server side CPU required by idle users
- Reduced server side memory by ensuring services only run when required
Speedify 7.7.0
- Change log not available for this version
Speedify 7.6.1
- Change log not available for this version
Speedify 7.6.0
- New command line interface: Nearly everything the user interface can do is now allowed through the command line
- Fixed an issue where networks could sometimes be incorrectly ignored by Speedify
- Fixed an issue that sometimes caused either multiple Speedify adapters or no Speedify adapters to be installed
Speedify 7.5.1
- Change log not available for this version
Speedify 7.4.0
New:
- DNS Control: Set the DNS server used for your VPN connection. Choose from Cloudflare, AdGuard, OpenDNS, Google DNS, and more!
- Stability and performance improvements
Speedify 7.2.9
- Change log not available for this version
Speedify 7.2.4
- Change log not available for this version
Speedify 7.2.0
- Change log not available for this version
Speedify 7.1.4
- Change log not available for this version
Speedify 7.1.3 Build 6030
New Features:
- Improved performance on lossy networks
- All new, redesigned test speed functionality, with trouble-shooting messages and performance suggestions
IOS:
- Improved app launch time
- Improved connection stability
Speedify 7.0.7.5
- Change log not available for this version
Speedify 7.0.5 Build 5722
- Change log not available for this version
Speedify 7.0.2 Build 5693
New Features in Speedify 7.0:
- Clean and modern dashboard that lets you see what connections you are using and how well they are performing
- The ability to see Channel Bonding in action–thanks to animated Connection Bubbles that radiate color when they’re being used
- Simplified animated introduction for streamlined onboarding
- Speedify for Teams Update: More ports available for Port Forwarding on Dedicated Servers
- Improved filtering of slow connections
SPEEDIFY 7.0 FOR ANDROID:
- Option not to disconnect when closing Speedify from Recents Screen
SPEEDIFY 7.0 FOR IOS:
- Extensive support for iOS 12, including Siri Shortcuts, Rich Notifications, and Keychain integration
- Network: Use new iOS 12 networking APIs for better flexibility and performance
- Improved look on iPhone X, XS, XS Max, and XR
SPEEDIFY 7.0 FOR WINDOWS:
- Option not to disconnect when closing Speedify UI
- Many more options on the command line interface (speedify_cli); has feature parity with the user interface
SPEEDIFY 7.0 FOR MAC:
- Many more options on the command line interface (speedify_cli); has feature parity with the user interface
Speedify 6.3.5 Build 5525
- Opportunity for users running iOS 12 to download our upcoming beta versions
- The “Switch Accounts” option has been changed to “Sign Out”
- More complete language translations for macOS
- Small user interface improvements
- Bug fixes
Speedify 6.3.2 Build 5457
New:
- GDPR Compliance: Speedify is now GDPR compliant. We have updated our privacy policy with new rights and policies
- Speed Improvements: Adjustments to connection bonding algorithm for slower speed connections (those < 1 Mbps)
- Performance improvements and bug fixes
Speedify 6.3.0 Build 5403
- Change log not available for this version
Speedify 6.2.0 Build 5344
- Change log not available for this version
Speedify 6.1.0 Build 5285
New:
- All operating systems: Performance Improvements: Improves performance in certain bonding scenarios
- All operating systems: Security Improvements: Updated to latest BoringSSL, which brings many fixes and improvements to our encryption engine
- Windows: Improved Internet Kill Switch: We’ve improved the behavior and messaging around the Internet Kill Switch. When activated, it ensures that Speedify stays connected, and other programs are blocked from accessing the Internet if Speedify is disconnected. If security is your top concern, this setting will keep you from ever accidently going online without the protection of Speedify”s VPN. To activate, go to Settings > Privacy > Internet Kill Switch
- Android: Android Oreo, Speedify notifications can now be managed individually from Android’s Notification settings
- Android: Fixed issue with clicking on settings on TV devices
- Android: Fixed issues restoring old purchases
- Android: Android KitKat (4.4) is no longer supported. KitKat users can still use Speedify 6.0
- iOS: Hardware accelerated encryption: Speedify now uses hardware acceleration for encryption, on iPhone 5S or later devices. On fast Internet connections, this can a big speed up
- iOS: Internet Kill Switch: In Settings > Privacy, Speedify now has an Internet Kill Switch. When activated, it ensures that Speedify stays connected, and other programs are blocked from accessing the internet if Speedify is disconnected. If security is your top concern, this setting will keep you from ever accidently going online without the protection of Speedify’s VPN
Speedify 6.0.1 Build 5229
- Change log not available for this version
Speedify 6.0.0 Build 5229
- Change log not available for this version
Speedify 6.0.0 Build 5225
- Change log not available for this version
Speedify 5.9.0 Build 5132
- Improved Settings UI
- Android: The VPN now runs in a separate process to improve reliability on devices with low memory
- Windows: Fix issue with non-Internet adapters showing in Speedify interface
- Command Line Interface: Add support for “connectmethod” to control whether to connect to fastest, dedicated, P2P or a particular country
Speedify 5.8.0 Build 5007
- Change log not available for this version
Speedify 5.7.1 Build 4958
- Change log not available for this version
Speedify 5.7.0 Build 4937
- Change log not available for this version
Speedify 5.6.2 Build 4903
- Change log not available for this version
Speedify 5.6.1 Build 4886
- Change log not available for this version
Speedify 5.6.0 Build 4865
- Rate Limiting: In the connection’s settings there is now an optional Rate Limit. When set this will prevent the connection from going faster on average than the speed you select. Why would you want to slow down your internet? Most people won’t want to, of course, but if you are trying to not use too much of an expensive cellular or satellite connection, then this could be a real money saver
Performance Improvements:
- Reduces the amount of latency that Speedify introduces into the network and over the Speedify tunnel
User Interface Improvements:
- Improved color palette on connections to avoid hard to read combinations. On the Desktop versions, when you only have one connection, a new faux connection called “Add Connection” appears which when clicked on offers guidance on how to set up new internet connections
Speedify 5.5.5 Build 4793
- Change log not available for this version
Speedify 5.5.3 Build 4760
- Change log not available for this version
Speedify 5.5.1 Build 4755
- Change log not available for this version
Speedify 5.5.0 Build 4715
- Change log not available for this version
Speedify 5.5.0 Build 4690
- Change log not available for this version