SpeedFan 歷史版本列表
更新時間：2010-07-26
更新細節：
What's new in this version:
- added full support for Intel QST 2.x
- added full support for fan control for Intel QST
- added full support for Fintek F71889F
- added full support for Fintek F71889ED
- added full support for SB8x0 SMBus
- added full support for Nuvoton W83677HG-I
- added full support for Nuvoton W83667HG-B
- added SB7xx/8xx PM2 fan speed readings and fan control
- added full support for MCP98242
- added full support for CAT34TS02
- added support for ITE IT8721F
- added support for USB hard disk enclosures with Cypress chipset
- added W83791D advanced settings for PWM MODEs
- improved ADT7490 PWM MODE advanced settings
- added ADVANCED options for Fintek F75387 PWM MODEs
- fixed Fintek F75387F PWM setting
- enabled SMBus on Intel ICH9-M, if needed
- added detection of LIS331DL
- added Intel QST 2.x advanced option to revert back to AUTO fan control
- upon resume from suspend only those fans that are automatically variated are initially set to 100%
- identified more CPUs
- Intel Atom Series 300 Tjmax set to 90C
- HECI support works only on Windows 2000 and later
- AMCC/3ware support works only on Windows 2000 and later
- added more names for SMART attributes
- added a new option to CONFIGURE / OPTIONS to disable SMART Summary Error Log on program start (this can dramatically improve SpeedFan startup time)
- the UI is now updated whenever new SMART data is read from the selected hard disk
- now, in CONFIGURE / EVENTS, when you press UPDATE to change some event, the editing fields are automatically cleared and the OK button is automatically enabled
- restored access to SMART attributes on AdvSmart, Areca and AMCC/3ware connected drives in Event configuration window
- events can now react to FITNESS and PERFORMANCE values of SMART hard disks
- added NOADVSMARTSCAN command line switch
- the first line of the email sent by an EVENT now has been changed to include the Machine Name
更新時間：2009-11-30
更新細節：
What's new in this version:
- improved identification of Winbond W83667HG
- W83667HG has its own support code now
- W83667HG PWM MODE settings now work properly and can be used to change fan speeds
- fixed a minor bug in temperature readings of EMCT03
- fully included data from TPWS002 Intel Document about Tjmax values
- added support for ADP3228 fan reading
- AdvSmart no longer links a drive if SMART data has bad checksums
更新時間：2009-08-10
更新細節：
What's new in this version:
- added full support for Fintek F71889F, even at unusual addresses
- added support for a new method to access SMART data
- added support for SCSI and SAT hard disk SMART access
- added full support for SuperMicro PWS-865-PQ PSU
- added full support for Winbond W83795G
- added full support for SMSC EMC1402
- added SHORT and EXTENDED OFF-LINE SMART TEST in SMART tab. This feature works on a number of supported interfaces and not on all of them
- added voltage readings for Winbond W83793G
- properly read Tjmax on Core i7 based Xeons
- relabeled IT8512F to IT8512E
- the tray hint is no longer updated if ShowStaticIcon is true
- the tray icon tooltip layout is now vertical
- added Fintek F72569DG detection
更新時間：2009-04-23
更新細節：
What's new in this version:
added full support for AMCC/3ware SMART readings
added full support for Intel QST
added full support for ADT7470
added full support for ADT7462
added full support for nVidia MCP79 SMBus
added full support for SiS968 SMBus
added full support for Intel i7 internal core temperature reading
improved ITE IT8720F identification
added Fintek F71858 temperature readings
PC87360, PC87362, PC87363, PC87364, PC87366 do hide unavailable readings now
ProbeGL5xxSM now checks some more registers to try to avoid false detections
improved CPU identification routines
improved FB-DIMM support on some Intel chipsets
the exotics tab now shows the fitness of the hard disks connected to ARECA RAID controllers too
ARECA and AMCC/3WARE connected hard disks are now searched before the standard channels, trying to avoid aliased, merged or fake reported SMART data
added identification of Fintek F75125R
removed two debug messages related to UGURU3
added some debug code to try to support VIA CX700/VX700 SMBus
DELL SUPPORT is now checked on ATI SBx00, Intel 631xESB, ICH8, ICH9 and ICH10 too
disabled DELL support on 64 bit systems
added /NODELLSCAN command line parameter
fixed daylight saving time handling in event emails
added full support for Windows 7 32 and 64 bit
fixed a minor bug that caused the main window to be minimized when clicked
CONFIGURATION / SPEEDS SpinBoxes now allow manual edit
added some scan exceptions for Asus M2N-E and for Dell 0G841G
INSTALLER: improved OS identification
INSTALLER: fixed the ADMIN identification issue
更新時間：2008-11-22
更新細節：
What's new in this version:
fixed a bug where, after resuming from suspend, fan speeds were not really change
added full support for AMD CD5536 SMBus
added identification of Fintek F75111R
fixed an Exotics tab Access Violation
fixed a bug that caused all of the EVENTS to be lost after entering CONFIGURE
更新時間：2008-11-14
更新細節：
What's new in this version:
4.36
greatly improved temperature reporting for almost all nVidia video cards
now fan speeds are lowered more aggressively
added support for AMD K11 temperature sensor
added full support for SMSC EMC6W201
added full support for SMSC SCH5127
added support for SMSC EMC2710P fan speed readings
ARECA RAID support updated to Build 270
added AMCC/3ware test code
improved IT8720F identification
fixed F1 context sensitive help key support
better identification of DIRECT RAMBUS modules
enabled Intel ICH8 SMBus, if needed
identified SMSC SCH5317
some addresses on the Asus P5N32-E SLI are no longer scanned
some addresses on the Asus Rampage Formula are no longer scanned
some addresses on EVGA NFORCE 680i LT SLI are no longer scanned
更新時間：2008-08-19
更新細節：
What's new in this version:
4.35
- released to the public the EXOTICS tab
- fixed 120 DPI issue in CONFIGURE dialog
- added full support for Areca RAID controllers
- greatly improved SCSI support
- added support for Abit uGuru 3 (uGuru 2005)
- added full support for Intel FB-DIMM temperature readings
- added full support for ITE IT8720F
- added full support for Andigilog aSC7611
- added full support for LM96000 (it was previously detected as LM85B)
- added full support for Analog Devices ADT7490
- added full support for SMSC SCH5327
- fixed Windbond W83766HG hardware monitor detection on some Asus motherboards
- improved CPU identification routines
- added support for a new revision of the WINBOND W83637HF
- added support for WINBOND W83637HF at unusual addresses
- added support for Asus F8000 at unusual addresses
- added identification of the SMSC SCH5514
- added identification of SMSC EMC2300
- added ITE IT8718F fifth fan speed reporting
- added identification of Analog Devices ADP3228
- added identification of ITE IT8512F
- added identification of Winbond W83667HG SuperIO chip
- identified a new revision of Fintek F71872 hardware monitor subsystem
- added preliminary detection of the HECI driver
- fixed a bug in SMSC LPC47M172 support code that prevented fan speeds to be properly reported
- 45nm Intel CPUs with CPUID=0x10676 now use a Tjmax value of either 105C or 90C
- added full support for nVidia MCP65 SMBus
- added full support for nVidia MCP67 SMBus
- added full support for nVidia MCP73 SMBus
- added full support for nVidia MCP78S SMBus
- added full support for VIA CX700M SMBus
- added full support for Intel 82801JIB SMBus
- fixed an issue where the Intel SMBus couldn't be accessed and messages like SMBus msg : SMB Error $14 : FAILED (50) were generated
- enabled Intel ICH8M-E SMBus device, if needed
- enabled 631xESB SMBus, if needed
- enabled SMBus on Intel ICH9R, if needed
- preliminary detection of AMD CD5536 SMBus
- some SMBus addresses on Asus Striker Extreme are no longer scanned
- SMBus is no longer scanned at address $2E on DELL XPS710
- Tyan S2927 second SMBus is no longer scanned
- some addresses on the SMBus of Asus P5NT WS are no longer scanned
- some addresses on the SMBus of the Intel DX38BT are no longer scanned
- some SMBus addresses are no longer scanned on Asus M2N32-SLI DELUXE
- the second nForce SMBus is no longer scanned on FIC AU31
- some addresses on the SMBus of Supermicro H8DCE are no longer scanned
- added some SMBus scan exclusions for Intel D5400XS
- added /NOGIVEIO command line parameter to disable access to giveio.sys
- added /NOGEFORCEROM command line switch that will prevent SpeedFan from reading nVidia GeForce ROMs (useful if it takes too much time)
- nVidia video BIOS is now stored in a file for later retrieval
- fixed an access violation under Win9x with some nVidia video cards
- battery status messages are no longer displayed
- upon resume, all controlled fans are set to 100% for half a second, then set to their minimum fan speed
- added new configuration option SHOWSTATICICON
- enabled Intel 6300ESB SMBus if needed
更新時間：2008-04-22
更新細節：
What's new in this version:
4.34
- added full support for SiS964 SMBus
- added full support for SiS966 SMBus
- added full support for ULi M1575 SMBus
- added full support for VIA VT8237S SMBus
- added full support for VIA VT8251 SMBus
- added full support for nVidia MCP61 SMBus
- added full support to read internal temperatures on AMD K10 processors
- added native nVidia video card (up to, but excluding 8xxx) internal temperature reporting
- added full support for SMSC SCH5307
- added full support for F8000 temperatures and fan speeds
- added full support for SMSC EMCT03
- added full support for WINBOND W83793G, including ADVANCED options
- added support for Fintek F71782F hardware monitor at unusual addresses
- added support for Winbond W83627DHG at unusual addresses
- added support for ITE IT8726F hardware monitor at unusual addresses
- added support for a new stepping of the Andigilog aSC7621
- Winbond W83791D properly handles higher fan divisors for fan1, fan2 and fan3 and shows fan4 and fan5 too
- added SMSC LPC47M192 FAN DIVISOR settings in CONFIGURE / ADVANCED
- added full PWM support to SMSC LPC47B397, including settings in CONFIGURE / ADVANCED
- CONFIGURE now allows to go as low as -60C when selecting the DESIRED and WARNING levels to let users of the RELATIVE Intel Core temperature reading properly configure SpeedFan
- improved DDR2 memory module size detection
- added preliminary DDR3 identification
- new icon by Bengt Strom
- fixed an issue where Intel Core temperatures on multi core systems reported the same temperature for all cores
- improved Tjunction detection for Intel CORE temperatures (you might no longer need the temperature offset in CONFIGURE / ADVANCED)
- fixed crash on several DFI motherboards
- fixed the detection of older revisions of the ITE IT8705F
- restored the correct clock speed after resume from hibernation
- rewritten the logic of the usage of a synchronizer in the thread that reads CPU usage (this will fix the SpeedFan not exiting issue)
- address $2E on DFI motherboards is no longer scanned if the motherboard model starts with LP. If you have one of these models and you know that there should be a valid chip at that address, send me a SEND REPORT (INFO tab) with some NOTES
- fixed ADT7475 temperature readings when in offset 64 mode
- fixed a bug when changing the type of data to be charted
- mails sent by SpeedFan now properly separate headers and the body with a blank line
- fixed an issue with SUN 2864 motherboard====
更新時間：2007-09-18
更新細節：
What's new in this version:
4.33 - completely rewritten the detection and the identification strategy of ITE IT871xF
chips (fan readings are now ok)
- xAP support is now properly reenabled between sessions
- fixed context sensitive help (F1 key) on Windows Vista
- enabled, if needed, the SMBus on Intel ICH7 and ICH8-M
- added several checks to CPU usage routines, fixing a nasty issue where an error
window appeared once every second
- added full support for ATI SB600 SMBus
- added full support for Intel ICH9 SMBus
- added full support for nVidia MCP55 SMBus
- added sull support for ADT7475
- added nVidia Control Panel access to read video card temperatures
- supported the IT8716F and the IT8718F hardware monitor at unusual addresses
- added some SMB scan exceptions for Compal 08A0
- SMBus address $15 no longer scanned on AOpen i975Xa-YDG
- fixed an issue that caused the DFI LP UT NF4 SLI-DR Venus to power off on program
start
- added support for Fintek F71872F voltage readings
- IT8712F-J now uses two undocumented FAN DIVs
- speeded up Asus M2N32-SLI DELUXE program startup
- added detection of an unknown Fintek chip (to avoid false detection of other
sensors at the same address)
- W83627EHF and W83627DHG now properly show SMARTFAN III in CONFIGURE / ADVANCED
- W83627EHF and W83627DHG can now change PWM TYPE from PWM to DC in CONFIGURE /
ADVANCED
- fixed FAN DIVISOR settings for Winbond W83791D
- added PWM OUT BASE CLOCK selection for WINBOND W83627DHG, W83627EHF and W83627EHG
- warning temperature can now be set as high as 125C in CONFIGURE
更新時間：2007-03-01
更新細節：
What's new in this version:
-added a digitally signed 64 bit driver (fully tested under Vista 64 bit)
-added full support for INTEL CORE DUO internal temperature readings
-added full support for Andigilog aSC7621
-added full support for Fintek F71882F
-added xAP support to publish temperatures and fan speeds
-improved support for Fintek F71782F
-improved support for IT8716F
-renamed temperatures readings for MAX6640
-improved compatibility with Intel D975XBX2
-reduced AD7416 and AD7417 false detections
-reduced MAX6650/6651 false detections
-improved Intel SMBus routines