Pale Moon 歷史版本列表 Page9

更新時間：2022-03-09
更新細節：

What's new in this version:

Improvements:
General:
- Make it possible using down button to focus the search all editors result list

Fixed:
- DB Support: DB2 LUW -  DB2 LUW: Comment on view problems
- DB Support: Oracle - DBMS Output is empty in rare situations
- DB Support: SingleStore
- Set back tick character as delimited identifier in SingleStore
- Driver Manager: java.lang.AbstractMethodError when using very old JDBC driver versions
- Deleting a user driver scrolls the list
- New/duplicated drivers are inserted last in list rather than by natural order
- General: Some settings may not be migrated properly at first start of 13.0 (e.g. tab colors)
- Grid Component: Occasional error when copy, export, open in spreadsheet, etc. in grids
- SQL History: Column sort in Tools->SQL History doesn't work for other columns than timestamp

更新時間：2022-03-08
更新細節：

What's new in this version:

Added:
- LAN-11905 A new setting under ConfigurationServer Options to configure when a switch port is deemed to be an “uplink”
- LAN-9049 Lansweeper now scans installed Microsoft Store apps of Windows computers, in addition to the other software installations it already scanned on those computers
- LAN-8881 Lansweeper now scans system drivers, PnP signed drivers and printer drivers of Windows computers

Changed:
- LAN-10439 Credential-free Device Recognition (CDR) is now also used to improve serial number data detected through Bonjour, SNMP and UPnP where possible
- LAN-8965 For consistency with Microsoft’s own naming conventions, replaced “Office 365” labels throughout the web console with “Microsoft 365”
- LAN-12026 For increased efficiency, the default scan interval of new performance scanning targets is now 1 hour
- LAN-12026 For increased efficiency, the minimum scan interval of performance scanning targets is now 15 minutes instead of 5 minutes
- LAN-3240 The Global Citrix scanning credential can now be cleared if desired

Fixed:
- LAN-11961 Automated cleanups of Windows event log data can fail with the following error: “DELETE statement conflicted with the REFERENCE constraint FK_tblntlog_tblntlogmessage”
- LAN-3331 Character encoding issue in the message seen while your login into the web console is in progress
- LAN-11865 Cross-site scripting (XSS) issue
- LAN-12492 Disabled deployment packages are shown in certain deployment popups when they shouldn’t be, resulting in a cluttered package list
- LAN-11411 Duplicating a deployment package can fail if the package being duplicated has a very long name
- LAN-11696 Exchange scanning fails to scan mailboxes of users that are in a child domain of the parent domain the Exchange server is in
- LAN-2565 Faulty software click-through links in the built-in reports “Apple Mac: Installed software by computer” and “Linux: Installed software by computer”
- LAN-2585 Grammatically incorrect error message when attempting to change the asset type of Windows assets to non-Windows using the Mass Edit Assets option
- LAN-897 If a previously scanned network interface is no longer present on an SNMP-enabled network device and that device is rescanned, a scanning error is erroneously thrown and no new data is saved, even though the data is retrievable
- LAN-11813 In a Lansweeper installation with multiple scan servers, the Check For Updates Now page confusingly shows the version number of the first scan server in the server list, when it should be showing the version number of the most out-of-date server
- LAN-4093 In case of a database connection issue, the ConfigEditor.exe tool only properly opens in the foreground after 60 seconds and only after manually opening and clicking away the database connection error
- LAN-11871 Inconsistent naming of the SoftwareApple Mac Software menu
- LAN-5166 “Index out of range” errors occur when performing certain searches in the MIB Library
- LAN-12029 Insufficient input validation for the start and end date fields of asset/user relations
- LAN-11853 Lansweeper does not correctly scan the memory information of Windows computers with DDR5 memory
- LAN-12342 Layout issue in unassigned ticket notifications in the upper right corner of the web console, under certain permission scenarios
- LAN-2754 Mailbox size information is not displayed in the ExchangeMailboxes tab of Exchange server assets, even though the data is scanned
- LAN-11953 Missing space in the “expired trial” licensing banner at the top of the Lansweeper web console
- LAN-12512 Operations performed on assets in Cloud don’t always complete correctly or sync down to the on-prem Lansweeper installation correctly
- LAN-12035 OutOfMemory exceptions are thrown when performing certain operations in a web console hosted under IIS Express, e.g. when viewing or exporting reports with very large outputs
- LAN-2562 The Devicetester tool does not test access to HTTP port 8080 and HTTPS port 8443, even though the Lansweeper scanning service does query these ports on network devices
- LAN-12520 The file path of the Lansweeper scanning service executable is not surrounded by quotes in the registry
- LAN-4024 The header of the Windows Version Overview widget erroneously indicates that the widget only lists Windows 10 operating systems and the widget also shows empty brackets for OS entries without a version
- LAN-11478 The MailTester.exe tool provides incorrect feedback when submitting a Microsoft Graph (REST) configuration whose account doesn’t exist or has no mailbox
- LAN-11945 The reports “Computer: New computers found in the last 24 hours” and “Computer: New computers found in the last 7 days” fail to list Windows computers that haven’t been successfully scanned
- LAN-12030 The username of the built-in admin is treated as case sensitive when it shouldn’t be
- LAN-3440 Unclear event log alert info message under ConfigurationE-mail Alerts when using multiple scan servers
- LAN-5165 Using high (but allowed) scanning thread settings can cause the following error to occur in the connection to the Lansweeper database and the Lansweeper scanning service to stop: “Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached”
- LAN-10418 Values of DateTime custom fields are only partially displayed in tickets
- LAN-12327 Warranty scanning fails to scan certain warranty products of supported manufacturers, with the following error occurring in the background: “Cannot insert the value NULL into column ServiceType”
- LAN-11021 When changes in notification counts occur in the upper right corner of the web console, the notification category icons don’t reposition themselves accordingly until a page refresh, sometimes causing counts to be cut off
- LAN-11497 When choosing Microsoft Graph as the protocol for email alerts, the following error is sometimes thrown when it shouldn’t be: “Please configure the email server for this scan server first”
- LAN-8673 When creating an asset relation and filtering for “All” states in the asset selection popup, no results are returned
- LAN-3770 When editing the Global SNMP credential, the Community input box shows as empty instead of listing placeholder dots
- LAN-11625 When hovering over a computer whose last logged on user is disabled in Active Directory, the computer itself is erroneously shown to be disabled in Active Directory
- LAN-11875 When linking a Lansweeper installation with Cloud and including certain special characters in the input boxes, the following error occurs and the sync gets stuck: “Something went wrong with creating the installation: Create Installation – Error during request”
- LAN-11228 When running a scan test, testconnection.exe enables Kerberos logging in the registry, but it fails to disable it again when the test is complete
- LAN-3443 When using a Lansweeper legacy license and scanning a network device using SNMP, duplicate SNMP scans are performed
- LAN-11115 When using the Enable/Disable All button in the Scanning Targets section of ScanningScanning Targets, an error occurs
- LAN-3669 When using the Mass Edit Assets option in the Assets menu to set the value of a combobox custom field to “none selected”, the value of the field is erroneously changed to “-1”

更新時間：2022-03-08
更新細節：

更新時間：2022-03-03
更新細節：

更新時間：2022-03-03
更新細節：

What's new in this version:

New Features:
- DB Support: Elasticsearch - Add support for Elasticsearch
- DB Support: MongoDB - Add basic support for MongoDB and BSON data viewer
- DB Support: Presto - Add support for Presto
- DB Support: Trino - Add support for Trino
- Driver Manager - Improve the driver management to support download drivers from Maven, version selection and more
- Installation/Update Installation - Add an installer for Apple Silicon, M1
- SQL Commander - A new feature to search across all open commander
- SQL Editor - windows

Improved:
- Connection Setup - Allow copying the actual database URL from the link
- Connection Setup Driver Manager - Add possibilities to set overridden driver properties centrally
- Driver properties with pre-defined list of values should be promoted in a drop-down
- Connection Setup SSH - Add support for ssh-agent with SSH Tunnel
- DB Support: Exasol - Add "certificate Fingerprint" for Exasol connections
- DB Support: Google BigQuery - Add driver entry for Google BigQuery
- DB Support: Greenplum
- DB Support: H2
- DB Support: Netezza
- DB Support: PostgreSQL
- DB Support: Redshift
- DB Support: Snowflake
- DB Support: Yellowbrick - Add "Rename Schema" in PostgreSQL
- DB Support: Oracle - Copying a scheduler job can only be created in connection user's schema
- DB Support: PostgreSQL - Add "CASCADE" to Truncate
- DB Support: SingleStore - Create driver entry and database type for SingleStore
- DB Support: Snowflake - Improve support for authenticator=externalbrowser
- Database Objects Tree - Give the option (or by default) to color visited table names
- Driver Manager - Dynamic OS specific libs should be loaded from driver jar files rather than setting java.library.path
- Filtering/Filter Sets - The Database Objects Filters editor should show and allow editing the label1 attribute for DataNodes
- Grid Component - Add a "Reset Grid" action to remove any current quick filters, column filters, sorting, and selection
- Installation/Update Installation - Should be possible to change the location of included user.vmoptions referenced in dbvis.vmoptions
- Installation/Update Installation Web - Remove the UNIX installers, replaced by Linux installers
- Performance/Stability - Increase the default value for -Xmx from 768m to 2048m
- SQL Commander - Reload of file should preserve current selection, scrolling, and caret position
- SSH - Support openssh config behavior to handle append, prepend and removal of algorithms
- Scripts - Open multiple script files at once

Fixed:
- Driver Manager: Unknown driver properties sent to database

更新時間：2022-02-20
更新細節：

What's new in this version:

- bugfix release

更新時間：2022-02-18
更新細節：

What's new in this version:

Fixed:
- LAN-12487 “Incorrect syntax” error on the ScanningScanning Targets page when the Lansweeper database is hosted in SQL Server 2008 or SQL Server 2008 R2
- LAN-12467 The Startup Type of the Lansweeper Server service is not correctly set to Automatic (Delayed Start) after a Lansweeper update

更新時間：2022-02-17
更新細節：

What's new in this version:

- Added: LAN-10165 A new option under Windows rename detection, disabled by default, to have Windows computers merge based just on a common model and serial number, without comparing the MAC addresses

Changed:
- LAN-2162 Added a Next Execution column to the deployment configuration section of DeploymentScheduled Deployments, so it is clear when a deployment will run next
- LAN-2114 Added paging to the DeploymentInstaller Packages menu to improve page load times when there are lots of deployment packages to display
- LAN-2114 For clarity’s sake, renamed some of the menus and labels in the Deployment section of the web console
- LAN-10427 For licensing situations that still had it, removed the limit on the number of scan servers a Lansweeper installation can have
- LAN-10556 If a scan server is receiving too many LsAgent or LsPush scans for timely processing, an error notification with recommendations is now shown in the web console
- LAN-10034 If an initial push to Cloud fails, a button is now available to manually trigger another push attempt
- LAN-10034 If an initial push to Cloud fails, the push is now automatically retried once after 15 minutes, instead of once after 1 hour
- LAN-11639 Improved the info popup seen in the Lansweeper installer when installing a secondary scan server
- LAN-2499 It is now possible to scan multiple AWS accounts with overlapping regions, by creating a scanning target for each account
- LAN-11702 Made the look of the Rescan button in asset overviews and reports consistent with the Rescan button on individual asset pages
- LAN-9397 SCCM scanning now respects scanning exclusions configured under ScanningScanning Targets and does not add excluded assets to the Lansweeper database
- LAN-10646 Updated the built-in lists of: iOS codes and names, Windows OS codes and names

Fixed:
- LAN-9399 A deployment configuration with a weekly schedule doesn’t run for the rest of the current week if it is manually triggered once
- LAN-5439 An initial push to Cloud can fail with the following error: “Could not create backup of the SQL database. Error executing xp_create_subdir”
- LAN-11899 Asset Radar sometimes scans and shows an incorrect IPv4 subnet mask value for assets, e.g. ffff:ffff:ffff:ffff::
- LAN-10955 Certain values retrieved during Azure and Intune scanning are trimmed and not fully written to the database, due to the database fields being too small
- LAN-11342 Cross-site scripting (XSS) issue
- LAN-11346 Cross-site scripting (XSS) issue
- LAN-11939 Cross-site scripting (XSS) issue
- LAN-2154 Deployments and email alerts using an Every 1st Of The Month schedule don’t execute as planned
- LAN-8863 Exchange server data can fail to scan due to an issue in the part of the Exchange identification procedure that looks for domain controllers
- LAN-11609 Help desk mailing can start failing when attempting to import an email with a very long (reply) subject
- LAN-11624 If a Windows computer and the user logged into it are in different domains, LsAgent incorrectly identifies the domain of the logged on user
- LAN-10530 If an agentless scan is performed of a Windows computer whose Print Spooler service is stopped or disabled, a “generic failure” error is generated on the machine’s asset page
- LAN-5072 If during the execution of a deployment a referenced file cannot be accessed in the package share, e.g. because the file is blocked by Windows, this can cause the deployment to fail with an unclear object reference error and future deployments on the client machine to get stuck
- LAN-11952 If the package share username of a deployment contains a dot, the username is incorrectly displayed in the deployment logs
- LAN-11930 In Lansweeper installations linked with Cloud, slight inaccuracies in disk data displayed for Windows computers in Cloud
- LAN-7376 In some cases, e.g. after the resolution of a database connection issue, the following error is thrown when attempting to log into the web console: “404 Error: This page cannot be found”
- LAN-11769 In very large Lansweeper installations with lots of assets, performance issues can occur in certain areas of the web console due to inefficient querying of the assets’ IP locations
- LAN-10007 Inability to view or deselect previously selected days in the edit popup of a Monthly deployment schedule
- LAN-11194 Inability to view or enable a scan server’s network interfaces in the Asset Radar configuration, if one of the server’s interfaces has multiple IP addresses
- LAN-11531 Intune scanning can fail with the following error: “Error saving Intune container: Unrecognized GUID format”
- LAN-11770 Long text values in fields in the Summary tab of asset pages do not always wrap correctly, causing display issues
- LAN-11849 LsAgent fails to fully scan macOS Big Sur
- LAN-11324 LsAgent fails to scan the memory of macOS computers with an Apple M1 chip
- LAN-11239 Memory issue when opening multiple instances of the Lansweeper report builder at the same time
- LAN-11649 Notifications regarding the deprecation of old Intune and Office 365 scanning targets do not automatically disappear after the removal of the deprecated targets
- LAN-9389 Optical disc drives of Linux computers are not always detected during scanning
- LAN-11508 “Region is not valid” error while scanning the ap-northeast-3 AWS region aka Asia Pacific (Osaka), due to Amazon changing the region from a local region to a standard region
- LAN-4961 Running a deployment on a dynamic group also results in deployment attempts against non-Windows assets in the group, which it shouldn’t
- LAN-11831 Running a deployment on a filtered list of assets from multiple scan servers can result in deployment attempts against assets that are in the asset list but not part of the filtered result
- LAN-803 Running deployments on a Windows computer and then deleting the computer’s asset results in orphaned deployment log entries with an empty asset name
- LAN-5159 Running multiple deployments on different sets of assets in the Assets menu can result in deployment attempts against incorrect, previously selected assets
- LAN-11852 Scanning a Windows computer using multiple scanning methods or agents can result in incomplete memory information being returned
- LAN-11938 SQL injection issue
- LAN-11940 SQL injection issue
- LAN-11941 SQL injection issue
- LAN-11587 The Edit Built-in Admin Password button is not always visible in the ResetWebUserRoles.exe tool for installations that have the built-in admin enabled
- LAN-11857 The Force HTTPS option is visible under ConfigurationWebsite Settings when using the IIS web server, even though that setting only applies to IIS Express and does nothing for IIS
- LAN-11884 The HTTP title of assets is displayed multiple times and in an incorrect way on individual asset pages
- LAN-11616 The Lansweeper web console does not always automatically open after completing a Lansweeper installation
- LAN-5120 The Last Execution time is not filled in under DeploymentScheduled Deployments for deployment configurations with an After Scanning schedule
- LAN-11345 The LsAgent scanning agent for Windows still scans files and registry keys that are disabled for scanning, which it shouldn’t
- LAN-11535 The OS information of SCCM assets isn’t always displayed in asset reports and overviews even though the data was scanned
- LAN-621 Triggering deployments on multiple asset pages within a short time frame can result in duplicate deployments on those assets
- LAN-3345 Unclear object reference error thrown by a deployment in the deployment log if Lansweeper is unable to copy the latest deployment executable to the client machine, e.g. due to a firewall issue
- LAN-8130 Unnecessary technical details are displayed in some web console validation messages
- LAN-11933 When accessing the web console over HTTP and then over HTTPS, the following web server error can occur: “Subquery returned more than 1 value”
- LAN-11663 When clicking the link to the troubleshooting guide in the Scan Issues section of an asset, the page erroneously opens in the current web browser tab instead of a new tab
- LAN-4439 When creating a deployment configuration, disabling the linked deployment package and then editing the configuration, another package is erroneously preselected in the popup window
- LAN-11178 When creating a scanning credential from within a popup for mapping credentials, not all of the listed credential types are compatible with the selected mapping type
- LAN-2162 When editing a schedule linked to a deployment configuration, the deployment triggers right away and outside of the configured schedule
- LAN-11927 When linking a Lansweeper installation with Cloud, the installations is erroneously marked as Down in Cloud until the initial push is fully complete
- LAN-11558 When logging out of the web console and then trying to log back in with a new user for the first time, the following error is generated: “You have been logged out”
- LAN-11619 When scanning a Windows computer both with and without a scanning agent, the credential info listed next to Last Successful Scan and Last Scan Attempt in the computer’s Scan Time tab is not always correct
- LAN-11588 When scanning Windows computers with LsAgent over the relay server and making changes to certain scan settings like file and registry scanning, those changes are not always synced to the agents
- LAN-11556 When submitting invalid settings during the creation of an Intune v2 or Office 365 v2 scanning target, and then correcting those settings, an error is thrown indicating that the scanning target name is already in use
- LAN-9034 When using a SQL Server database hosted on Linux and linking the Lansweeper installation with Cloud, the Cloud prerequisite checks get stuck instead of throwing an error about Linux databases being unsupported
- LAN-11650 When using IIS Express and changing the Force HTTPS setting, the web console does not indicate that a web service restart is required for the change to take effect

更新時間：2022-02-12
更新細節：

What's new in this version:

Fixed:
- OpenGL related crash with NanoPixel
- Crash with Eraser tool

Changed:
- Pigment color mixing is working with Blend, Smudge, and Clone tool
- New tool for changing image format with selection, menu -> Edit -> "Crop Canvas"
- New "Use Precise Tip Tilt" in the Brush Creator: Tip Tilt curve editor for smoother lines when using pen tilt.
- New Mixing Palette panel menu -> "Use Shortcuts from Properties panel" (shortcuts: "1", "2", "3", "4", "5", "Alt", "X")
- More intuitive Zoom ("Z") / Rotate ("R") / Flip ("Shift + F") the canvas with the settings in Preferences
- New in Preferences -> General -> Canvas: "Rotate at cursor"
- New in Preferences -> General -> Canvas: "Flip at cursor"
- New in Preferences -> General -> "Pause simulation while using other applications"
- New in Preferences -> General -> "Open floating panels on the display with Rebelle's main window"
- New in Preferences -> General -> "Add 'Export to Photoshop' button to Layers panel" (Rebelle 5 Pro)

更新時間：2022-02-08
更新細節：