MobaXterm 歷史版本列表
更新時間：2021-04-14
更新細節：
What's new in this version:
- bonding - improved system stability when disabling/enabling bonding ports
- bridge - improved bridge stability when host changes port (introduced in v6.47)
- console - require "write+ftp" permissions for exporting configuration to file
- console - updated copyright notice
- crs3xx - added "/system swos" menu for CRS354 devices, should only be used after SwOS 2.13 release
- crs3xx - fixed interface LEDs for QSFP+ and SFP+ interfaces on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices
- crs3xx - fixed packet transmit in 5Gbps link rate for CRS312 device
- crs3xx - improved 1Gbps Ethernet port group traffic forwarding for CRS354 devices
- dhcp - fixed link state checking for DHCP client
- ethernet - fixed cable-test for some devices (e.g. RB2011, RB951G-2HnD)
- ethernet - improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices
- fastpath - fixed IP packet receive on bridge and bonding interfaces when destination MAC address match with slave port MAC
- health - fixed voltage monitor on BaseBox5 devices
- ike2 - added "MS-CHAP-Domain" attribute to RADIUS requests
- ike2 - fixed DH group negotiation with EAP
- ike2 - fixed EAP MSK length validation (introduced in v6.48)
- ike2 - fixed initial traffic selector's protocol and port in transport mode
- ipv6 - improved system stability when parsing IPv6 options
- lora - added additional predefined network servers
- lora - added option to hide CRC error messages in monitor
- lora - improved downlink transmission
- ospf - fixed type-7 LSA translation to type-5
- ovpn - fixed route cache entry leak when establishing a new session
- poe - do not perform PoE firmware upgrade procedure on RB960 and OmniTik devices without PoE out
- ppp - do not fail "at-chat" command when issued on disabled PPP interface
- ptp - improved management service stability when receiving bogus packets
- quickset - prefer 5GHz interface for WiFi scan in CPE mode
- rb3011 - improved system stability when changing RouterBOARD settings (introduced in v6.48)
- snmp - fixed SNMP trap agent address
- supout - fixed "topic" column presence in "Log" section
- switch - improved resource allocation on 98PX1012 switch chip for CCR2004-1G-12S+2XS device
- switch - improved system stability with 98PX1012 switch chip for CCR2004-1G-12S+2XS device
- telnet - do not send options if connecting to non standard port
- telnet - fixed server when run on non standard port
- tr069-client - improved management service stability when receiving bogus packets
- upgrade - fixed upgrade procedure on 16MB devices
- upgrade - improved "long-term" upgrade procedure on SMIPS devices
- user - fixed "skin" configuration for user groups (introduced in v6.48)
webfig:
- allow to specify "prefix" parameter under "IPv6/ND/Prefixes" menu
- do not corrupt settings when starting "Wireless Sniffer"
- do not move top right menu in opposite direction when scrolling horizontally
- do not show newly created SMB shares as invalid
- fixed new interface addition
- show "Interfaces" menu by default after logging in
- show "network-mode" for LTE modems that support it
winbox:
- added "Channel" parameter under "System/Console" menu
- do not show empty "CPU Frequency" parameter under "System/Resources" menu
- fixed "reachable-time" value unit under "IPv6/ND" menu
- fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu
- fixed duplicate "Trusted" setting under "Interface/Bridge/Ports" menu
- hide "Allow Roaming" parameter on LTE modems that do not support it
- increased "target" field limit to 128 under "Queues" menu
- renamed IP protocol 41 to "ipv6-encap"
- show "LCD" only on boards that have LCD
- show "System/Health" only on boards that have health monitoring
- show "activity" column by default under "IP/Kid Control/Devices" menu
更新時間：2021-03-10
更新細節：
What's new in this version:
- Meet “Esperanza”, the first WordPress release of 2021. “Esperanza” is named in honor of Esperanza Spalding, a modern musical prodigy. Her path as a musician is varied and inspiring—learn more about her and give her music a listen!
- With this new version, WordPress brings you fresh colors. The editor helps you work in a few places you couldn’t before without getting into code or hiring a pro. The controls you use most are right where you need them. Layout changes that should be simple, are even simpler to make.
Now the new editor is easier to use:
- Font-size adjustment in more places: now, font-size controls are right where you need them in the List and Code blocks. No more trekking to another screen to make that single change!
- Reusable blocks: several enhancements make reusable blocks more stable and easier to use. And now they save automatically with the post when you click the Update button
- Inserter drag-and-drop: drag blocks and block patterns from the inserter right into your post
You can do more without writing custom code:
- Full-height alignment: have you ever wanted to make a block, like the Cover block, fill the whole window? Now you can
- Buttons block: now you can choose a vertical or a horizontal layout. And you can set the width of a button to a preset percentage
- Social Icons block: now you can change the size of the icons
A simpler default color palette:
- This new streamlined color palette collapses all the colors that used to be in the WordPress source code down to seven core colors and a range of 56 shades that meet the WCAG 2.0 AA recommended contrast ratio against white or black.
- Find the new palette in the default WordPress Dashboard color scheme, and use it when you’re building themes, plugins, or any other components. For all the details, check out the Color Palette dev note.
From HTTP to HTTPS in a single click:
- Starting now, switching a site from HTTP to HTTPS is a one-click move. WordPress will automatically update database URLs when you make the switch. No more hunting and guessing!
New Robots API:
- The new Robots API lets you include the filter directives in the robots meta tag, and the API includes the max-image-preview: large directive by default. That means search engines can show bigger image previews, which can boost your traffic (unless the site is marked not-public).
Lazy-load your iFrames:
- Now it’s simple to let iframes lazy-load. By default, WordPress will add a loading="lazy" attribute to iframe tags when both width and height are specified
Ongoing cleanup after update to jQuery 3.5.1:
- For years jQuery helped make things move on the screen in ways the basic tools couldn’t—but that keeps changing, and so does jQuery
- In 5.7, jQuery gets more focused and less intrusive, with fewer messages in the console
更新時間：2021-03-07
更新細節：
What's new in this version:
New:
- you can now select "PowerShell 7" or "Windows PowerShell" in Shell session settings
- added a new "Import/Export configuration" feature in the "Settings" menu which allows you to backup or share your MobaXterm configuration as a single file
- added a new "Reset configuration" feature in the "Settings" menu which allows you to reset the entire MobaXterm configuration or only reset some specific defaults
Improved:
- the Professional Customizer is now compatible with Wine, under Linux and Mac OsX
- improved several components design in dark mode (checkboxes, comboboxes, ...)
- many components have been themed for a better look under Wine
- added support for SSH keys with ED25519 algorithm in SFTP sessions
- filtered out several useless entries from the remote monitoring "disk space" section
- the Professional Customizer is now able to embed big plugin files into the generated ZIP archive
- the Professional Customizer can now extract the main executable properly, even if the Windows installer is disabled by some third-party software
- the Professional Customizer allows you to edit all the banners of sessions that rely on a terminal (SSH, WSL, local terminal, telnet, rlogin)
- you can now define the default font charset and select "Use font encoding" as terminal charset (useful for special character encodings)
- you can now define a specific terminal font charset for each terminal-based session
- the local terminal prompt is now adapted when the current path is too long to fit into the terminal width
- the SSH-browser header has been adapted to the dark theme
- an enhanced tooltip and a right-click menu with a list of listening DISPLAYS have been added to the "X" button in the top toolbar
- when the X server is off, its DISPLAY is now reserved in order to prevent sessions that have been started with a specific DISPLAY to lose it
- if the X server is off and an application tries to access it, a popup dialog informs you and allows you to start it
- better detection of each X server and Remote monitoring instances ownership when MobaXterm is launched in "Multi-instances" mode
- the detection of running X server instances has been improved in order to prevent MobaXterm from slowing down
- added a "Start Windows Powershell as admin" menu entry in the "Tools" section
- added a specific icon for imported PuTTY sessions folder
- added an entry in the sessions right-click menu which allows to autodetect and import WSL sessions
- added a right-click menu in the tabs bar which allows to quickly start a specific shell (Bash, Cmd, Powershell, Wsl) or jump to a specific tab
- a check at MobaXterm startup verifies if the CygUtils plugin is obsolete
- better detection of the OneDrive folder when its name is in 8.3 format
- shared sessions with SFTP backend can now use passphrase protected SSH keys
- better auto-detection of the default shell for each WSL session
- better identification of external programs windows that overlap RDP sessions when they are "always on top"
- added some information concerning the currently active network connections in SSH remote monitoring bar
- broken text files with UTF-8 BOM header but ANSI encoding are now automatically identified
- improved the "RemoteMonitoringCompatibleMode" configuration setting which allows the remote monitoring feature to work properly with the Fish shell
- adapted the width of the multi-execution message to the width of the main window
- many tooltips have been added in order to display contextual help when your mouse cursor is over a component
- when you use the search feature of MobaTextEditor and hit the end of the file, searching now continues from the beginning of the file
- the terminal now supports many more font icons for better compatibility with enhanced shell prompts like oh-my-zsh and Powerlevel10K
- the TCPCapture tool can now be started with another user account if the current user account is not an administrator
- better identification of the AltGr key in order to prevent AltGr+Space to be treated as the Ctrl+Space ("Quick macro menu") keyboard shortcut
- added a new "lsfont" tool which prints the complete font character set into the terminal
- added some information about apt-get in case you try to start yum, urpmi, or emerge command in the local terminal
- the "Documents" folder can now be selected under the "Libraries" folder in the file picker
- better detection of all the partitions with their corresponding sizes in the remote monitoring bar
- you can now change text files encoding in MobaTextEditor or convert text files encodings
- the application title is now set after a few milliseconds in order to prevent MobaXterm from being flooded with tab title change requests
- the %USERNAME% variable is now resolved to the local user name in SSH remote command
- improved startup speed and removed some small visual glitches in dark mode
Fixed:
- fixed the tab order in the global settings and sessions windows
- when using the "Quick search" feature and clicking on the blank part under the "New session" icon, the "New session" window was started
- in the SSH-browser and FTP/SFTP sessions, when editing a file and simultaneously clicking on another one resulted in a popup asking if you wanted to rename the file
- in the global settings window, scrollbars no longer lose their dark theme when switching focus with the "TAB" key
- right-clicking on a folder to open MobaXterm terminal in that folder did not work if the default shell was WSL and MobaXterm was already running
- the tab titles were sometimes incorrect when extended characters were used in conjunction with a specific Windows language configuration
- fixed a tab moving issue when "focus follows mouse" was set in Windows
- corrected a slowness issue when browsing for plugins in the Customizer
- the "Terminal type" setting was not properly refreshed the first time a session was edited
- the Display resolution setting of RDP sessions was not taken into account when starting an RDP session just after MobaXterm startup
- fixed a potential redirection ambiguity in the ServersListToMxtSessions.sh script
- fixed a potential missing library file in ZSH shell (64 bit) which prevented Cmd or Powershell from starting properly
- after having selected a file to upload in the explorer dialog, the parent folder is no longer locked by MobaXterm
- fixed a potential issue when reconnecting or duplicating a telnet or rsh session which uses an SSH gateway
- when closing several terminals at the same time, sometimes some of them were missing from the prompt dialog list
- duplicate tab feature now works properly when you duplicate a WSL tab that uses a localhost connection
- removed a small glitch with the "Deep" skin when clicking on the "View" menu item
- removed a casual issue with file sizes greater than 4 GB in the SSH-browser when the SSH-browser mode is set to SCP
- in "Split mode", when cycling through tabs using a keyboard shortcut (Ctrl+Alt+arrow or Ctrl+Tab), the focus can no more be assigned to an invisible tab
- the Slash directory can now be set to the same folder as the application, even if the CygUtils plugin is disabled
- the macros combobox in terminal sessions was out of bounds when Windows DPI setting was at 125%
- when selecting several sessions and launching one of them from the "Recent sessions" panel, all the selected sessions were launched
更新時間：2021-02-24
更新細節：
What's new in this version:
Fixed:
- "Leave site? Changes you made may not be saved" on custom taxonomy pages after WP 5.6.1 update
- Image options are not visible in pop up on clicking replace button from Image block
- Can't change font size with 5.6.1 paragraph block
- Block editor package updates for 5.6.2
- Zip Module 2.8.2 - class-pclzip fatal error with PHP 8.0
更新時間：2021-02-05
更新細節：
What's new in this version:
- crs312 - fixed missing SwOS firmware on revision 2 devices
- crs3xx - fixed packet duplication when multiple bonding interfaces are created for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices
- crs3xx - fixed port-isolation on ether37-ether48 ports for CRS354 device
- crs3xx - improved load balancing on bonding interfaces for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices
- crs3xx - improved system stability when bonding and IGMP snooping is used (introduced in v6.48)
- hotspot - fixed "idle-timeout" usage with RADIUS authentication
- hotspot - fixed special character parsing in "target" variable (CVE-2021-3014)
- ike2 - fixed phase 2 rekeying with enabled PFS (introduced in v6.48)
- ike2 - improved stability when invalid certificate is configured (introduced in v6.48)
- ike2 - properly register packet time after expensive CPU operations
- interface - fixed pwr-line interface linking (introduced in v6.48)
- ipsec - improved stability when processing IPv6 packets larger than interface MTU
- led - fixed default LED configuration for RB911-5HnD
- package - do not include multiple The Dude packages in HDD installer
- snmp - fixed "send-trap" functionality (introduced in v6.48)
- switch - fixed interface toggling for devices with multiple QCA8337, Atheros8327 or RTL8367 switch chips (introduced in v6.48)
- winbox - fixed enable/disable button presence for "Bridge/Hosts" menu
- wireless - renamed "macedonia" regulatory domain information to "north macedonia"
更新時間：2021-02-04
更新細節：
更新時間：2020-12-23
更新細節：
What's new in this version:
- arm - added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices
- arm - improved system stability
- arm - improved watchdog and kernel panic reporting in log after reboots on IPQ4018/IPQ4019 devices
- arm64 - improved reboot reason reporting in log
- bgp - fixed VPNV4 RD byte order
- bonding - added LACP monitoring
- branding - fixed LCD logo loading from new style branding package
- bridge - added "multicast-router" monitoring value for bridge interface
- bridge - added fixes and improvements for IGMP and MLD snooping
- bridge - added minor fixes and improvements for IGMP snooping with HW offloading
- bridge - added warning message when port is disabled by the BPDU guard
- bridge - allow to exclude interfaces from extended ports
- bridge - automatically remove extended interfaces when deleting PE device from CB
- bridge - correctly filter packets by L2MTU size
- bridge - correctly remove dynamic VLAN assignment for bridge ports
- bridge - fixed "multicast-router" setting on bridge enable
- bridge - fixed MDB entry removal when using bridge port "fast-leave" property
- bridge - fixed dynamic VLAN assignment when changing port "frame-type" property (introduced in v6.46)
- bridge - fixed dynamic VLAN assignment when changing port to tagged VLAN member
- bridge - fixed link-local multicast forwarding when IGMP snooping and HW offloading is enabled
- bridge - fixed local MAC address removal from host table when deleting bridge interface
- bridge - fixed multicast table printing
- bridge - improved BPDU guard logging
- bridge - increased multicast table size to 4K entries
- bridge - show "H" flag for extended bridge ports
- bridge - show error when switch do not support controlling bridge or port extension
- bridge - use "frame-types=admit-all" by default for extended bridge ports
- cap - fixed L2MTU setting from CAPsMAN
- certificate - clear challenge password on renew
- certificate - fixed CRL URL length limit
- certificate - fixed private key verification for CA certificate during signing process
- certificate - generate CRL even when CRL URL not specified
- certificate - properly flush expired SCEP OTP entries
- chr - fixed SSH key import on Azure
- chr - fixed VLAN tagged packet transmit on bridge for Hyper-V installations
- chr - improved interface loading on startup on XEN
- chr - improved system stability when changing flow control settings on e1000
- cloud - improved backup generation process
- conntrack - automatically reduce connection tracking timeouts when table is full
- console - allow "once" parameter for bonding monitoring
- crs3xx - added initial Bridge Port Extender support
- crs3xx - added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices
- crs3xx - added switch-cpu port VLAN filtering (switch-cpu port is now mapped with bridge interface VLAN membership when vlan-filtering is enabled)
- crs3xx - correctly filter packets by L2MTU size
- crs3xx - fixed "custom-drop-packet" and "not-learned" switch stats for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices
- crs3xx - fixed "mirror-source" property on switch port disable for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices
- crs3xx - fixed "storm-rate" traffic limiting for switch-cpu port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices
- crs3xx - fixed "switch-cpu" VLAN membership on bridge disable
- crs3xx - fixed CDP packet forwarding for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices
- crs3xx - fixed duplicate host entries when creating static switch hosts
- crs3xx - fixed port isolation for "switch-cpu" port for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices
- crs3xx - fixed port isolation removal for "switch-cpu" port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices
- crs3xx - fixed switch "copy-to-cpu" property for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices
- crs3xx - fixed switch "not-learned" stats for CRS305, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, CRS318 devices
- crs3xx - improved system stability on CRS354 devices
- crs3xx - improved system stability when receiving large frames for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (introduced in v6.47.5)
- defconf - fixed default configuration loading on RBcAP-2nD and RBwAP-2nD
- defconf - fixed static IP address setting in case default configuration loading fails
- defconf - improved CAP interface bridging
- defconf - improved default configuration generation on devices with non-default wireless interface names
- detnet - fixed malformed dummy DHCP User Class option
- detnet - use MAC address from bridge interface instead of slave port
- dhcp - fixed DHCP packet forwarding to IPsec policies
- dhcpv4-server - improved "client-id" value parsing
- dhcpv6 server - added support for "Delegated-IPv6-Prefix" for PPP services
- dhcpv6-server - added ability to generate binding on first request
- dhcpv6-server - added support for "option18" and "option37" for RADIUS managed clients
- dhcpv6-server - allow loose static binding "pool" parameter (introduced in v6.46.8)
- dhcpv6-server - make sure that calling station ID always contains DUID
- discovery - added "lldp-med-net-policy-vlan" property for assigning VLAN ID
- discovery - allow choosing which discovery protocol is used
- discovery - fixed discovery on mesh ports
- discovery - fixed discovery packet sending on newly bridged port with "protocol-mode=none"
- discovery - fixed discovery when enabled only on master port
- discovery - send the same "Chassis ID" on all interfaces for LLDP packets
- discovery - use interface MAC address when sending MNDP from slave port
- disk - fixed external EXT3 disk mounting on x86 systems
- dns - added IPv6 support for DoH
- dns - do not use type "A" for static entries with unspecified type
- dns - end ongoing queries when changing DoH configuration
- dns - fixed listening for DNS queries when only dynamic static entries exist (introduced in v6.47)
- dot1x - accept priority tagged (VLAN 0) EAP packets on dot1x client
- dot1x - fixed reauthentication after server rejects a client into VLAN
- dot1x - fixed unicast destination EAP packet receiving when a client is running on a bridge port
- dude - fixed configuration menu presence on ARM64 devices
- export - fixed RouterBOARD USB "type" parameter export
- filesystem - fixed repartition on RB4011 series devices
- filesystem - fixed repartition on non-first partition
- filesystem - improved long-term filesystem stability and data integrity
- gps - fixed "init-channel" release when not used
- health - changed PSU state parameter type to read-only
- health - removed unused "heater-control" and "heater-threshold" parameters
- hotspot - added "vlan-id" parameter support for hosts and HTML pages
- hotspot - added support for captive portal advertising using DHCP (RFC7710)
- hotspot - fixed "html-directory" parameter export
- hotspot - improved management service stability when receiving bogus packets
- ike1 - fixed "my-id=address" parameter usage together with certificate authentication
- ike1 - fixed 'rsa-signature-hybrid' authentication method
- ike1 - fixed memory leak on multiple CR payloads
- ike1 - fixed policy update with and without mode configuration
- ike1 - rekey phase 1 as responder for Windows initiators
- ike2 - added "prf-algorithm" support for phase 1
- ike2 - added support for IKEv2 Message Fragmentation (RFC7383)
- ike2 - fixed EAP MSK length validation
- ike2 - fixed too small payload parsing
- ike2 - improved EAP message integrity checking
- ike2 - improved child SA rekeying process
- interface - added temperature warning and interface disable on overheat for SFP and SFP+ interfaces (CLI only)
- interface - fixed pwr-line running state (introduced in v6.45)
- ipsec - added SHA384 hash algorithm support for phase 1
- ipsec - do not kill connection when peer's "name" or "comment" is changed
- ipsec - fixed client certificate usage when certificate is renewed with SCEP
- ipsec - fixed multiple warning message display for peers
- ipsec - inactivate peer's policy on disconnect
- ipsec - refresh peer's DNS only when phase 1 is down
- kidcontrol - allow creating static device entries without assigned user
- led - fixed state persistence after device reboot on NetMetal 5 ac devices
- lora - fixed device going into "ERROR" state caused by FSK modulated downlinks
- lora - limited output power in RU region for range 868.7 MHz - 869.2 MHz according to regulations
- lte - added "age" column and "max-age" parameter to "cell-monitor" (CLI only)
- lte - added "comment" parameter for APN profiles
- lte - added support for Alcatel IK41VE1
- lte - fixed "band" value reporting
- lte - increased "at+cops" reply timeout to 90 seconds
- m33g - added support for "/system gpio" menu (CLI only)
- metarouter - allow creating RouterOS metarouter instances on devices with 16MB flash storage
- metarouter - fixed memory leak when tearing down metarouter instance
- ppp - added "bridge-learning" parameter support
- ppp - added "ipv6-routes" parameter to "secrets" menu
- ppp - added support for "Framed-IPv6-Route" RADIUS attribute
- ppp - store "last-caller-id" for PPP secrets
- ppp - store "last-disconnect-reason" for PPP secrets
- profile - added "lcd" process classificator
- profile - improved idle process detection on x86 processors
- profile - improved process classification on ARM devices
- quickset - added "Port Mapping" to QuickSet
- quickset - fixed local IP address setting on master interface
- route - improved stability when 6to4 interface is configured with disabled IPv6 package
- routerboard - fixed PCIe bus reset during power-on on MMIPS devices ("/system routerboard upgrade" required)
- routerboard - force power-down on PCIe bus during reboot on LHGR devices ("/system routerboard upgrade" required)
- script - added error message in the logs if startup script runtime limit was exceeded
- snmp - added information from IPsec "active-peers" menu to MIKROTIK-MIB
- snmp - added new LTE monitoring OID's to MIKROTIK-MIB
- snmp - fixed value types for "dot1dStp"
- snmp - fixed value types for "dot1qPvid"
- ssh - fixed returned output saving to file when "output-to-file" parameter is used
- ssh - skip interactive authentication when not running in interactive mode
- supout - added bonding interface monitor information
- supout - improved autosupout.rif file generation process
- timezone - updated timezone information from "tzdata2020d" release
- tr069-client - added "X_MIKROTIK_MimoRSRP" parameter for LTE RSRP value reporting
- tr069-client - added LTE model and revision parameters
- tr069-client - added additional wireless registration table parameters
- tr069-client - added branding package build time parameter
- tr069-client - added wireless "noise-floor" and "overall-tx-ccq" information parameters
- tr069-client - allow passing LTE firmware update URL as XML
- tr069-client - fixed RouterOS downgrade procedure
- tr069-client - fixed TotalBytesReceived parameter value
- tr069-client - send correct "ConnectionRequestURL" when using IPv6
- traffic-flow - added "sys-init-time" parameter support
- traffic-flow - added NAT event logging support for IPFIX
- traffic-generator - fixed 32Gbps limitation
- user-manager - do not allow creating limitation that crosses midnight
- user-manager - updated PayPal's root certificate authorities
- webfig - allow hiding QuickSet mode selector
- webfig - allow hiding and renaming inline buttons
- webfig - fixed default value presence when creating new entries under "IP/Kid Control"
- webfig - properly stop background processes when switching away from QuickSet tab
- winbox - added "src-mac-address" parameter under "IP/DHCP-Server/Leases" menu
- winbox - added missing IGMP Snooping settings to "Bridge" menu
- winbox - added missing MSTP settings to "Bridge" menu
- winbox - added support for LTE Cell Monitor
- winbox - allow adding bonding interface with one slave interface
- winbox - allow performing "USB Power Reset" on "0" bus on RBM33G
- winbox - do not show "network-mode" parameter for LTE interfaces that do not support it
- winbox - fixed "IP->Kid Control->Devices" table automatic refreshing
- winbox - fixed "interface" and "on-interface" parameter presence under "Bridge/Hosts" menu
- winbox - fixed "receive-errors" setting persistence under "Wireless/Wireless Sniffer/Settings" menu
- winbox - fixed "tls-version" parameter setting under "IP/Services" menu
- winbox - fixed minor typo in "Users" menu
- winbox - provide sane default values for bridge "VLAN IDs" parameter
- winbox - use health values reported by gauges for "System/Health" menu
- wireless - added U-NII-2 support for US and Canada country profiles for mANTBox series devices
- wireless - create "connect-list" rule when address specified for "setup-repeater"
- wireless - do not override MTU and ARP values from CAPsMAN with local forwarding
- wireless - improved WPS process stability
- wireless - increased "group-key-update" maximum value to 1 day
- wireless - updated "indonesia5" regulatory domain information
- wireless - updated "no_country_set" regulatory domain information
更新時間：2020-12-09
更新細節：
What's new in this version:
Greater layout flexibility:
- Bring your stories to life with more tools that let you edit your layout with or without code. Single column blocks, designs using mixed widths and columns, full-width headers, and gradients in your cover block—make small changes or big statements with equal ease!
More block patterns:
- In some themes, preconfigured block patterns make setting up standard pages on your site a breeze. Let the power of patterns streamline your workflow and save you clicks. Plus, share these features with clients, editors, and more.
Better video captioning:
- To help you add subtitles or captions to your videos, you can now upload them within your post or page. This makes it easier than ever to make your videos accessible for anyone who needs or prefers to use subtitles.
Twenty Twenty-One is here:
- Twenty Twenty-One is a blank canvas for your ideas, and the block editor is the best brush. It is built for the block editor and packed with brand-new block patterns you can only get in the default themes. Try different layouts in a matter of seconds, and let the theme’s eye-catching, yet timeless design make your work shine.
- What’s more, this default theme puts accessibility at the heart of your website. It conforms to the WordPress accessibility-ready guidelines and addresses several more specialized standards from the Web Content Accessibility Guidelines (WCAG) 2.1 at level AAA. It will help you meet the highest level of international accessibility standards when you create accessible content and choose plugins which are accessible too!
A rainbow of soft pastels:
- Perfect for a new year, Twenty Twenty-One gives you a range of pre-selected color palettes in pastel, all of which conform to AAA standards for contrast. You can also choose your own background color for the theme, and the theme chooses accessibility-conscious text colors for you — automatically!
- Need more flexibility than that? You can also choose your own color palette from the color picker
Improvements for everyone:
Expanding auto-updates:
- For years, only developers have been able to update WordPress automatically. But now you have that option, right in your dashboard. If this is your first site, you have auto-updates ready to go, right now! Upgrading an existing site? No problem! Everything is the same as it was before.
Accessibility Statement:
- Even if you’re not an expert, you can start letting others know about your site’s commitment to accessibility! The new feature plugin includes template copy for you to edit and publish, and it’s written to support different contexts and jurisdictions.
Built-in Patterns:
- If you’ve not had the chance to play with block patterns yet, all default themes now feature a range of block patterns that let you master complex layouts with minimal effort. Customize the patterns to your liking with the copy, images, and colors that fit your story or brand.
For developers:
REST API authentication with Application Passwords:
- Thanks to the API’s new Application Passwords authorization feature, third-party apps can connect to your site seamlessly and securely. This new REST API feature lets you see what apps are connecting to your site and control what they do.
More PHP 8 support:
- 5.6 marks the first steps toward WordPress Core support for PHP 8. Now is a great time to start planning how your WordPress products, services, and sites can support the latest PHP version. For more information about what to expect next, read the PHP 8 developer note.
jQuery:
- Updates to jQuery in WordPress take place across three releases 5.5, 5.6, and 5.7. As we reach the mid-point of this process, run the update test plugin to check your sites for errors ahead of time
- If you find issues with the way your site looks ( e.g. a slider doesn’t work, a button is stuck — that sort of thing), install the jQuery Migrate plugin
更新時間：2020-11-30
更新細節：
What's new in this version:
Improved:
- MobaTextEditor can now auto-detect UTF-8 text files which do not contain any BOM ("Byte Order Mark") header
- MobaTextEditor auto-detects encoding when opening a file and will use it when saving the file if the encoding has not been changed manually in the meantime
- you can now search backward in files by using Shift+F3 keyboard shortcut in MobaTextEditor
- increased speed of search in MobaTextEditor, especially when you choose to highlight all results
- MobaTextEditor can now be closed with the ESCAPE key
- added support for v4 signatures for Amazon AWS S3 sessions
- added support for buckets regions auto-detection for Amazon AWS S3 sessions
- the "Browse for folder" feature speed has been improved in MobaTextEditor
Fixed:
- removed an "unspecified error" which occurred in RDP sessions under Windows 7
- fixed an incorrect remote desktop resolution in RDP sessions, when "Adapt remote DPI" setting was checked
- when creating or duplicating a macro, the macros list was not properly refreshed
更新時間：2020-11-30
更新細節：
What's new in this version:
Fixed:
- [Security] [DX] Automatically add PasswordUpgradeBadge + default support() impl in AbstractFormLoginAuthenticator
- [Messenger] Fix mssql compatibility for doctrine transport
- [DoctrineBridge] Fix form EntityType with filter on UID
- [HttpClient] fix binding to network interfaces
- [DependencyInjection] Fix circular in DI with lazy + byContruct loop
-9153 [Security] Automatically register custom authenticator as entry_point (if supported)
- [DependencyInjection][Translator] Silent deprecation triggered by libxml_disable_entity_loader
- [Form] prevent duplicated error message for file upload limits
- [Form] ignore the pattern attribute for textareas
-9118 [DoctrineBridge] Require doctrine/persistence 2
-9128 [HttpFoundation] Deprecate BinaryFileResponse::create()
- [Yaml] fix lexing strings containing escaped quotation characters
- [Security] Support for SwitchUserToken instances serialized with 4.4/5.1
- [Serializer] Fix denormalizing scalar with UnwrappingDenormalizer
- [PhpUnitBridge] Fix qualification of deprecations triggered by the debug class loader
- [Console] Use a partial buffer in SymfonyStyle
- [Console] Fix console closing tag
- [VarDumper] fix casting resources turned into objects on PHP 8
- [Cache] Fix CI because of Couchbase version
- [HttpClient] don't fallback to HTTP/1.1 when HTTP/2 streams break
- [Yaml] fix lexing nested sequences/mappings