MKVToolNix 歷史版本列表 Page3

更新時間：2023-07-15
更新細節：

What's new in this version:

- UI and performance improvements
- Categories 'Movies' and 'Series' were merged

Allow to choose active channel grid, between:
- Default - Provided by the app
- Lists - Extracted from the active IPTV lists
- EPG - Extracted from the EPG

更新時間：2023-07-05
更新細節：

What's new in this version:

- Improves CD / DVD burning
- Some minor bug fixes and enhancements

更新時間：2023-07-03
更新細節：

What's new in this version:

New features and enhancements:
- MKVToolNix GUI: header editor: for files that only contain legacy track language elements but no IETF language elements the header editor will now derive the IETF language elements from the legacy elements
- AppImage: the AppImage is now built on AlmaLinux 8 with Qt 6.5.1. This means that the minimum glibc version this AppImage is compatible with has also been bumped, to v2.28. The oldest Debian coming with this version is Debian10 "Buster"; for Ubuntu it's 18.10 "Cosmic Cuttlefish".
- Windows installer: the installer will now remove the file`dataportable-app` if it's present in the installation directory as its presence would signal to the app to run in portable mode, requiring write access to its base directory. This fixes some installation issues that could occur when a user extracted a portable app archive into a folder like `C:Program FilesMKVToolNix`. Also added an installation check for the same issue

Fixed:
- all: Linux: if initializing the locale system based on the system's settings fails, e.g. if environment variables such as `LC_ALL` have been set to`fr_FR.UTF-8` but the locale for `fr_FR.UTF-8` hasn't been built, MKVToolNix will try to fall back to `en_US.UTF-8` first & `C.UTF-8` second. If neithe of the three succeeds, an error message will be shown, and the program will abort. This fixes the programs not catching an exception from the `boost::filesystem` library which doesn't cope with mis-configured locale systems well.
- mkvmerge: sorting tracks by type did not work properly when some tracks weren't copied
- mkvmerge: track numbers in the destination file were assigned out-of-order when the track order in the source files differs from the one in the destination file. Now they're assigned sequentially in the order the tracks appear in the destination file again
- MKVToolNix GUI: under certain circumstances the GUI would try to display error messages from a secondary thread, which isn't allowed in Qt, causing to program to either hang or outright crash
- MKVToolNix GUI: the GUI will check for several potential installation issues wrt. to having write access to certain directories (system's temporary directory, MKVToolNix's file identification cache directory and others) & display proper error messages if not
- MKVToolNix GUI: header editor: fixed the application crashing whenever you change a property below the "segment information" node. This bug was introduced in v77
- MKVToolNix GUI: header editor: when reading files that only contain legacy track language elements but no IETF track language elements, the header editor was showing all tracks as having "English" as the language. This bug was introduced in v77
- MKVToolNix GUI: header editor: when a legacy track language element contains a country code (e.g. `fr-CA`), the header editor was wrongfully using `und` = "undetermined" as the language for that element. Now it'll use the language from the language/country pair, which would be `fr` in the earlier example
- MKVToolNix GUI: header editor: the keyboard shortcuts from the "modify selected track" sub-menu didn't work right after opening a file. They only started working after opening the "header editor" menu
- AppImage: fixed the GUI resources (e.g. icons) not being found.
- AppImage: the Qt plugins required for using compose key/dead keys are now included

Build system changes:
- The compilation database (`compile_commands.json`) is now always built.The variable `BUILD_COMPILATION_DATABASE` is not evaluated anymore.

更新時間：2023-06-26
更新細節：

What's new in this version:

- Critical bugfix for performance on MPEGTS broadcasts
- Minor bugfixes and improvements

更新時間：2023-06-19
更新細節：

What's new in this version:

- Bugfix on fullscreen and tray mode (PC)
- Prevent audio to keep playing after stop
- Minor bugfixes and improvements

更新時間：2023-06-15
更新細節：

What's new in this version:

- Bugfixes and minor performance improvements

更新時間：2023-06-09
更新細節：

更新時間：2023-06-05
更新細節：

What's new in this version:

- Default to current deck in csv import if settings allow it
- Disable Toggle Bury when nothing is selected
- If the old Anki uninstaller fails, allow installation to proceed
- Improve phrasing in dialog that asks which deck's options should be shown
- Add add-on installation hooks

Fixed:
- Fix broken window styling when installation path includes certain Latin1 chars on Windows
- Fix illegible tooltips when system in dark mode on some Linux installs
- Fix incorrect font sizes on X11 when fractional scaling in use
- Fix some add-on installation errors not being reported

更新時間：2023-06-05
更新細節：

What's new in this version:

New features and enhancements:
- mkvmerge: tracks in the destination file will now be sorted by their type automatically unless the track order is specified with the `--track-order` option. The order is as follows: video tracks first followed by audio & subtitle tracks with other rarely used types of tracks last. Tracks of the same type will be sorted in the same order as their source files occur in the command-line arguments. Note that this doesn't affect file identification. Implements #3545.
- MKVToolNix GUI: multiplexer: the default list colors used for distinguishing source files does not include the darkest tier anymore (the ones where one or two components are set to the value 0x3f) as they're hard to distinguish from each other. Only affects new installations, or when the user presses the "reset to default colors" button. Implements #3533.
- MKVToolNix GUI: multiplexer: the GUI will now check the state of the 'track enabled' flag of all video, audio & subtitle tracks when starting to multiplex or adding a job to the job queue. If there's no track with its flag turned on for a type, the GUI will turn on the flag for the first track of the type. This behavior can be turned off in the preferences. Implements #3535.
- MKVToolNix GUI: header editor: the columns in the tracks/attachments view and the values on the "track type" page will now be updated each time a corresponding property is changed (e.g. when a track's name is changed) instead of showing what's in the file on disk. Implements #3554.
- MKVToolNix GUI: macOS: when you install the application from the DMG it'll register itself as an alternate handler for its supported file types. This allows the use of the "Open with" context menu action in Finder.
- MKVToolNix GUI: Windows: a new settings in the preferences lets the user chose whether to use the light or the dark color palette, or to follow the system settings

Fixed:
- Fixed compilation with fmt v10.0.0
- mkvmerge: fixed several instances of wrong format strings for `fmt::format` used in debug messages
- mkvmerge: AV1 packetizer: the packetizer did not honor the aspect ratio (factor) given on the command-line via the `--aspect-ratio` or `--aspect-ratio-factor` options.
- mkvmerge: JSON identification: cropping parameters are reported again even if some of the four values are not present in the file or set to 0.
- mkvmerge: Windows: when writing to a network share connected via SMB1`mkvmerge` was aborting with a error about `create_directory() failed` with existing directories. This was due to a bug in recent versions of the Boost.Filesystem library. The Windows version of MKVToolNix will be built with Boost 1.82.0 from now on which includes the fix.
- MKVToolNix GUI: the defunct "disable the dark mode" checkbox was removed from the preferences
- MKVToolNix GUI: language dialog: under certain conditions the controls for the individual components remained disabled when the dialog is opened even though editing of individual components is selected.
- MKVToolNix GUI: language dialog: the controls for the individual components weren't re-initialized properly after opening the dialog for the second & all following times, potentially leaving previously selected/entered entries intact, primarily when editing multiple tracks at once.
- MKVToolNix GUI: header editor: using the actions from the "modify selected track" context menu only worked if the user right-clicked on the first column in the view. They now work for clicks on any of the columns. See also #3554.
- MKVToolNix GUI: header editor: some of the actions toggling specific flags from the "modify selected track" did not work correctly if the flag wasn't currently present in the file, especially if the underlying value has a default value in the Matroska specs.

MKVToolNix GUI: Windows: the GUI will now always use its own implementation of light & dark palettes instead of relying on Qt. This circumvents two issues with the palette support in Qt 6.5.0:
- if Windows 11's dark application mode is active, links were displayed in a hard-to-read dark blue
- for unknown reasons the the dark palette was not chosen on some Windows 11 installations even though Windows 11's color mode was set to "dark"

Build system changes:
- The bundled `fmt` library was updated to v10.0.0
- MKVToolNix GUI now uses an external Qt resource file instead of compiling it into the executable. The resource file has reached a size at which the C++ compiler exhausts available virtual memory on some 32-bit architectures. On Windows & macOS the GUI will look for the file in `<folder_with_executables>/data/qt_resources.rcc`, and in the directory set with `configure`'s `--datadir` parameter on other systems (which usually means `/usr/share/mkvtoolnix`). The `install` build system commands installs it into that folder.

更新時間：2023-06-05
更新細節：

What's new in this version:

- Fixed rare bug that might cause some folders not to be detected by WizTree when parsing MFT file due to unusual MFT record ordering
- Tree, file and extension views text size can be increased/decreased by using Ctrl+MouseWheel
- When importing CSV files WizTree will now display the line number containing invalid data that caused the import to fail. Useful for those who create WizTree compatible CSV files
- Added new "Reset Configuration to default values" function to the File menu. This will set all but the licencing info back to default values. Use this if you notice anything weird happening (like very large or small column widths, font sizes, etc)
- WizTree will now by default display the maximum "last modified date" for all files and folders within a folder instead of the standard Windows last modified date. This will only apply to new installations or when resetting the configuration. To disable this edit the WizTree3.ini file and change the following setting: - ShowMaxModifiedDate=0
- WizTree will now default to sorting by "Allocated" space instead of "Size" as this better reflects actual space used by files. Allocated space will now also be displayed on the Treemap by default. This will only apply to new installations or when resetting the configuration
- Installer has been updated to use the correct configuration file location when being installed to a non "Program Files" location. If WizTree detects it's running from the "Program Files" folder it assumes it's the "installed" version and keeps the config file in the %appdata%WizTree3 folder, otherwise it will keep the config file in the same folder it's running from. Previously the installer would always assume the config file was in %appdata% folder, which would be incorrect when installing to a non default location.
- This is useful for Enterprise users running automated installs as the "SYSTEM" user as the various config command line parameters will now be applied to the correct configuration file.
- e.g. to do a silent install of WizTree into the "C:WizTreeApp" folder with no desktop icon, auto configuring it to not run as admin, disable checking for updates, and setting the license key:
- wiztree_4_14_setup.exe /DIR="C:WizTreeApp" /VERYSILENT /SUPPRESSMSGBOXES /NORESTART /SP- /MERGETASKS=!desktopicon /runasadmin=false /checkforupdates=false /supportercode=xxxx-xxxx-xxxx
- Installer will now update the registry to make mapped network drives that were created by non elevated processes visible to elevated processes like WizTree. This will require a restart to take effect if not already enabled.