Malwarebytes Anti-Malware 歷史版本列表
更新時間：2017-04-15
更新細節：
What's new in this version:
- Fixed the issue in Windows 10 Creators Update where installing Malwarebytes could cause Windows Defender to become disabled
更新時間：2017-01-26
更新細節：
What's new in this version:
Performance/protective capability:
- Several improvements to malware detection and remediation capabilities
- Several performance improvements, including improving startup time, addressing memory leaks and reducing CPU usage after a scan has completed
- Added MS Publisher as a default Protected Application for anti-exploit protection
Usability:
- Fixed issue where a previously activated Premium license could be dropped incorrectly
- Fixed issue where Malwarebytes version information would revert to default values of 3.0.0 in certain cases, such as when coming back from minimal safe mode
- Fixed issue where ‘Real-Time Protection turned off’ notifications would display incorrectly on initial startup
- Fixed problem where the 'Check for updates every' setting would get stuck at 14 days after changing frequency to ‘Days’
- Fixed Help question marks throughout the main user interface so that they work when clicked
Stability/issues fixed:
- Addressed several crashes and blue screens, including the BSOD that could occur with Web Protection on Windows Insider Previews
- Fixed the issue with Exploit Protection that caused Edge to crash/hang on Windows Insider Previews
- Fixed issue when Exploit Protection was enabled that caused PowerPoint to not load
- Fixed conditions that could lead to an ‘Unable to connect to service’ error
- Fixed issue where exclusions did not work properly when there were associated threat traces detected
- Fixed issue where Web Protection would not start up properly
- Fixed numerous scan hangs or crashes, including one that could occur during heuristics phase
- Numerous other fixes to improve overall program stability and usability
更新時間：2016-12-20
更新細節：
What's new in this version:
- Fixed installer error that displayed 'External exception E06D7363'
- Fixed issue where updates would get stuck in 'Checking' state
- Fixed slow shutdown issue that could occur in Windows 7 with Malware Protection enabled
- Fixed conflict with Kaspersky that would not allow browsers to open properly
- Improved upgrade experience when installing over a previous version of the Malwarebytes anti-exploit technology
更新時間：2016-12-08
更新細節：
What's new in this version:
Performance/protective capability:
- Added signature-less anti-exploit and anti-ransomware protection (Premium only)
- Up to 4x faster scan speeds, including even quicker Hyper Scans
- Removed non-essential reboots after certain malware removal events
- Advanced heuristic engine (Shuriken) now enabled by default
- Self-protection now enabled by default (Premium only)
Usability:
- Redesigned user interface for improved user experience
- Now configurable to integrate with Windows Action Center/Windows Security Center (Premium only)
- Update checks are done automatically so they don’t need to be scheduled
- Improved support for keyboard navigation and screen readers
Stability/issues fixed:
- Added ability to lock down My Account screen via User Access Policy
- Added ability to collect enhanced logs when directed to do so by support
- Fixed issue where Scheduler did not adjust for Daylight Saving Time
- Fixed issue where Scheduler defaulted to hourly Threat Scan instead of daily
- Fixed issue where Chameleon reported error messages numerous times to Windows Event Viewer
- Changed “Recover if missed by” setting in Scheduler to “Off” by default
- Prevented rootkit scanning in Custom Scans if full system drive is not selected
- Updated to latest version of 7-Zip DLL
- Addressed other miscellaneous defects
更新時間：2016-03-31
更新細節：
What's new in this version:
Improvements:
- Context Menu scanning option is now enabled by default. Note if you had this option disabled previously and want to retain that setting, you must disable again manually this one time only. Future updates will retain the setting properly
- Improved renewal experience for those who purchased in retail store so that the original license key is retained post-renewal instead of requiring that a new key be entered and activated
- Improved End of Trial experience so it is clear that trial has expired and real-time protection is no longer available
- Added additional license checks to ensure subscription details are updated as quickly as possible after a renewal is processed
- Updated company and product logos with new logo
- For Premium subscription licenses, removed Renew button from My Account screen to avoid confusion over license term
Issues Fixed:
- Fixed security vulnerability to ensure database updates are downloaded over SSL connections only
- Fixed crash that occurred if Dell Backup and Recovery software was installed on same system
- Fixed issue where scheduled scan did not honor weekly recurrence properly
- Fixed issue where license expiration notices were incorrectly displaying multiple times in rapid succession
- Fixed issue where the Scheduler would continue to run in certain cases after a trial had expired
- Fixed issue where the update progress bar on the Dashboard would appear to hang and would never complete
- Several improvements to Chameleon self-protection
更新時間：2016-01-08
更新細節：
What's new in this version:
Debugger:
- The new debugger features a live disassembly view and allows developers to debug games way easier than before while being very useful feature in assisting the debugging of games which aren't working properly. Its main purpose is aiding in game hacking, translation patches for example list of Keyboard shortcuts for the debugger functions can be found at docs/debugger.txt
Folder memory cards:
- The new Folder memory card feature allows users to easily share single game saves instead of the whole memory cards by simply sending the folder of the specific game. This method also allows easier backup of the save files and allows deletion of game saves without even going into the PS2 bios or the game. You even convert your older memory cards to a folder using the built-in convert feature!
- Another neat advantage is that it provides unlimited storage capacity for save files as games will only see their own saves and the rest of the perceived 8MB memory card as free space. This allows you to create as many saves as would fit onto a whole empty memory card in a single game, without concerns about leaving enough space for other games or ever running into the problem where you start a new game and only later realize you don't have enough free space on the memory card to save, and without the incompatibility issues of emulating bigger third party memory cards.
EE Overclock:
- You can now manipulate the EE Cyclerate to overclock and underclock the Emotion Engine's R5900 Core CPU clock speed, The negative values on the slider allow you to reduce the clock speed and conversely the positive values effectively increase the clockspeed.
Recompiler Improvements and Core Refactors:
- GIF: Better Handling for Finish Interrupt request signal
- MicroVU: General Improvements
- SIF: Limit/Mask transfer size to 1mb-16bytes
- VIF: Better handling of IRQ and MFIFO Timing improvements
- EE Interpreter: Improved TLB miss exception handling
Support for loading Gzip and CSO compressed ISO's:
- PCSX2 can now directly load compresed ISO images, so you can save your precious HDD space!
GSDX
Programmable blending to reproduce GS blending unit output:
- The source of the issues on GPU blending unit is due to the fact that the raster operations pipeline (ROP) differ from the GS and the GPU which means that the GPU ROP's don't support the equations which are supported by the GS ROP's and hence it leads to wrong blending which causes situations like horizontal black lines or missing effects on some games.
- Hardware implementations are usually limited to only a subset of all possible equations. A software implementation based on a CPU (such as a shader) would be able to do any operation at the cost of performance.
- The new option (Blending Unit Accuracy), which is an OpenGL renderer exclusive, moves the computing of the ROP to the shader. This way it is more accurate but considerably slower. You can try different levels of the option "Blending Unit Accuracy" to check out the impact on the accuracy and performance.
Improved CRTC output size handling:
- There were few rare cases on games running at NTSC video mode where the detected frame buffer height was too large and eventually caused the whole screen to have a weird format with unexpected bottom black bars on the screen. A few games which suffered similar issues are Skyrunner, Devil may cry 3, Tribes: Aerial Assault. This eventually got fixed by proper saturation limit for height in case of NTSC video mode.
Software renderer improvements:
- Silent Hill outputs a nan in Q to emulate the flashlight - an unsupported NaN (not a number) on the projection value (Q). Gregory used an isnan test to find such instances and emulate the flash light effect. Gabest later decreased the speed impact by using inlined ASM. Fixes Flash light effects on Silent Hill 3.
- Better texture size management in software mode, fixes Horsez and Stolen memory issue and also lowers memory usage in general.
- Better handling of textures addressing outside the limits by extending the cached texture size to the upper limits of the region clamp values: Fixes Lupin the 3rd
Accurate destination alpha testing:
- Better behavior to replicate one of the GS functions where the Graphics Synthesizer can discard a pixel based on the destination output. In order to emulate this function properly you need in-order RW texture. Unfortunately standard GPU only has either an in-order RO texture or an out-of-order RW texture, to circumvent around this limitation accurate date implements a two pass algorithm to implement the effect. The 1st pass searches the valid primitive ID and the 2nd pass will do the draw based on the previous pass.
Improved read of depth / color:
- A standard GPU has separate textures for the color and the depth information. The GS doesn't enforce such separation between color/depth information. So it is allowed to read depth as color or write color into depth. You could even write depth in the color render target. It is used for effects such as "depth of field". The new option "Hardware depth", which is an OpenGL renderer exclusive, allows to convert depth/color into color/depth respectively. Now you can enjoy accurate reproduction of such effects. However these conversions require additional resources from your GPU which might gradually decrease performance in cost of accuracy.
SPU2-X
Per channel volume adjustment:
- A.K.A Room Correction. This feature is present in the control panel of some audio chips, but often enough, the settings that work well for the system in general, don't match the settings that you prefer for emulated games, due to the intrinsic differences of the emulated machine.
- It does exactly what it sounds like: lets you adjust each output channel independently, to compensate for things such as distance of the speakers to the chair, or to emphasize the vocals (center channel) or the surround sound (side/back channels) when the game's balance is not fully to your liking.
- You'll find the values hidden in the SPU2-X.INI file, under the MIXING section (VolumeAdjust series of keys). The values are in decibels, which means writing 1 in one of the volumes will make the amplitude 10x larger, 2 will blow it up to 100x, and -1 will make it 1/10th of the original. Smaller values in the range of -1 to 1 are recommended for testing, as it's easy to cause unwanted clipping in the output.
Time Stretcher:
Improvements to tempo adjustments:
- Previously latency values higher than 200ms will make the stretcher adjustments overshoot the target
- equilibrium back and forth, in effect never stabilizing. This bug was fixed by lowering the tempo adjustments to avoid potential overshoots on bigger buffers.
- The latency slider will now allow a minimum value of 15ms. Providing choices of choosing from values between 15 to 29ms on the slider.
GUI:
Configurable template on GSFrame titlebar:
- There was some discussion among the users about the elements which should be displayed on the title bar of the rendering window, some of them disagreed with the placement of the elements and suggested to replace them in different order and have certain elements prioritized. While our users opinions are respected, all of them had very different ideas and it was impossible to satisfy everyone. Hence a consensus was never reached.
- So Avih decided to create a general template system to allow customization of the elements on the title bar. The following template is located in the inis_1.4.0/PCSX2_ui.ini file though lacks a user interface for easier customization.
Revamped Core and GSDX plugin dialogs:
- The Core and GSDX dialogs have undergone quite a deal of changes like converting the three-state checkboxes to a combobox, inclusion of tooltips on GSDX dialogs and further simplification / categorization which eventually lead to the Shader configuration dialog which includes all the Shader based options. (Shade Boost , FXAA , TV Shader and External shader) on the core side, there was a recent WX update from 2.8 to 3.0 which eventually caused a few issues but all of them got fixed eventually by our WX Expert Turtleli and there has also been support for DPI scaling added for all the dialogs. The Emulation settings dialog has also been changed slightly to be more consistent with the Linux GUI.
更新時間：2015-10-12
更新細節：
What's new in this version:
Improvements:
- Full support for Windows 10 operating system added
- Enhanced safeguards to prevent false positives on legitimate files
- Improved rootkit scanning to prevent false positives for Unknown.Rootkit.Driver and Unknown.Rootkit.VBR
- Minor user interface edits including updated Scan Results view and updated top navigation menu
- Added ability to sort the columns in Quarantine table under History tab
- Improved handling of scheduled updates set to run on reboot to prevent repeated missed updates
- Improved messaging in limited user accounts when an action requiring Admin privileges is attempted
- New message added when Malwarebytes Anti-Malware is running in a business environment
- Updated License Agreement included
Issues Fixed:
- Fixed security vulnerability and enhanced Malwarebytes Anti-Malware self-protection
- Fixed several issues related to updating databases in a limited user account
- Fixed issue where USB drives would not show as available for scanning on the Custom Scan Configuration screen
- Fixed several licensing issues that could potentially cause invalid license and protection states
- Fixed problem where double-clicking the tray icon would not launch the user interface
更新時間：2015-06-30
更新細節：
What's new in this version:
Improvements:
- License key is now displayed on the My Account screen
- Remaining subscription duration now displayed on My Account screen
- Implemented other licensing improvements to clarify license status
- Enhanced protection capabilities of Malwarebytes Anti-Malware Web Protection
- Numerous enhancements to prepare for full compatibility with Windows 10
- Enhanced Malwarebytes Chameleon's ability to fully restore Malwarebytes functionality when affected by a malware infection
- Updated data collection techniques to improve malware research and analysis
- Removed "Exclude" button on Website Blocked notification to reduce inadvertent allowing of malicious sites
- Updated button text on Malware Detected and Non-Malware Detected notifications to clarify meaning
- Added enhanced support for High DPI displays
- Enabled the Malwarebytes Anti-Malware Free version to receive incremental database updates
- Added appropriate copyright notices and license statements for all third-party open source software
- Corrected translation errors for core non-English languages (German, French, Spanish, Italian, Dutch, Portuguese, Brazilian Portuguese, Russian and Polish)
- Added support for Chinese Traditional, which is provided as a convenience for our users by a community volunteer and is not an officially supported language
- Several improvements to malware detection and remediation capabilities
Issues Fixed:
- Reverted the temporary change in v.2.1.6 that disabled checking for updates prior to scheduled scans
- Fixed SDK Database load errors for error code 2 and 1812
- Removed obsolete "Terminate program when no threats are found" setting since scans now run from the tray application
- Fixed several crashes that could occur during scan and quarantine operations
- Fixed crash that occurred when clicking the Clear Policies link on Access Policies screen
- Fixed issue where "Show notification after successful update" setting was not properly retained during upgrade from v.2.1.4 to v.2.1.6
- Fixed issue where "Close notification" setting was not retained during upgrade from v. 2.1.4 to v.2.1.6 if the user had changed that setting back to 7 seconds after installing v.2.1.4
- Fixed issue on the Quarantine screen where unselecting a quarantined item disabled the Delete and Restore buttons
- Fixed issue where incorrect program version was listed in the scan logs
- Disabled option to specify rootkit scanning as part of a Hyper scan
- Fixed issue in Windows 10 Tech Preview and Windows 8.1 where Malwarebytes Anti-Malware was unable to start in certain cases after self-protection was turned on
- Fixed issue where Malwarebytes Chameleon did not load properly on Windows XP SP3 in certain conditions
- Fixed issue which prevented Malwarebytes Anti-Malware v.2.1.4 (and higher) from upgrading over certain Malwarebytes Anti-Malware v.1.75 consumer builds
更新時間：2015-04-24
更新細節：
What's new in this version:
- Fixed crash during Heuristic Analysis phase when scanning
- Fixed SDK database load errors by making a change to temporarily ignore the “Check for updates before scanning” setting for Scheduled Scans
- Fixed crash when editing or removing an Access Policy if the name and description fields in the policy were different
- Fixed issue where the “Restart computer when required for threat removal” setting did not appear correctly on Add or Edit Schedule dialogs
- Updated end user license agreement
更新時間：2015-03-19
更新細節：
What's new in this version:
Issues Fixed:
- Admin users should no longer see a prompt to login as admin to perform a program upgrade
- Fixed issue where the web protection service (MWAC) was not restarting properly
- Fixed numerous issues with scheduled scans, including showing the correct date for “Next scheduled scan” on the dashboard
- Fixed issue where mbamscheduler was starting on boot when Malwarebytes Anti-Malware was set not to start with Windows
- Fixed issue where any non-English language selected during installation would not be applied after installation
- Fixed issue where Malwarebytes Anti-Malware did not always automatically update the database on installation
- Fixed issue where the “Delay Protection at startup for 15 seconds” setting showed as enabled, but was actually disabled. (We recommend reviewing this option to ensure it is configured as you intended.)
- Fixed issue where "Error Code 6" displayed at the end of scans
- Fixed issue on Windows XP where scheduled scans on reboot would not start if the "Enable self-protection module" was checked
- Malwarebytes Anti-Malware now honors self-protection settings detected from a previous installation
- Fixed issue where context menu scan was not honoring user selection under detection and protection setting
- Several issues with notification were fixed
- Several enhancements were made to the user interface to address accessibility issues
- Several UI and user experience enhancements implemented
Improvements:
- Updated user interface design that showcases a much cleaner look and toned-down color scheme
- Improved scan flow so all scans now automatically check for and apply the latest database updates
- Simplified quarantine flow so only one action button is presented when threats are detected
- Several improvements to malware detection and remediation capabilities, including enhanced detection and removal of rootkits
- The Minimize button now minimizes the main program window to the taskbar instead of to the tray
- The default display timeout for notifications was changed to 3 seconds instead of 7 seconds
- The default value for "Show notification after successful update" is now set to "Off" for all scheduled updates
- Removed informational/marketing message from main dashboard view
- Removed support for Thai language due to quality issues with the translation
- Installation of a Consumer/Home version of Malwarebytes Anti-Malware over a Business version is now blocked