Loaris Trojan Remover 歷史版本列表
更新時間：2021-11-16
更新細節：
更新時間：2021-11-09
更新細節：
What's new in this version:
Major features:
- Native M1 Mac support
- Chronos Fast model for videos with rapid motion
- Proteus, Artemis and Dione updated for reduced artifacts, faster processing
Improvements:
- Improved preferences panel with all settings in one place
- The VRAM slider is local to the user hardware, so max will mean use all - memory on device
- Ability to view and use all models without using model manager
- All models now maintain color consistency better than before
- Installer size has been reduced significantly
- Lots of bug fixes
Known Issues:
- Keep audio on Mac does not work
更新時間：2021-11-09
更新細節：
What's new in this version:
Features:
- Added warning when ipcRenderer.sendSync() is called with no listeners for channel on ipcMain
Fixed:
- Changed WebHID to use disable-hid-blocklist flag to enable FIDO devices
- Fixed <webview> background transparency regression
- Fixed clipboard.writeBuffer(), clipboard.readBuffer() and clipboard.read()'s ability to manipulate platform-specific clipboard formats
- Fixed a crash when a BrowserWindow is closed subsequent to its webContents being destroyed
- Fixed a tracing agent-related crash when initializing Node.js in service workers
- Fixed an issue where Content-Disposition filenames would be incorrectly truncated at the first comma for a filename attachment which contained one
- Fixed an issue where MediaMetadata did not work properly
- Fixed an issue where app.getPath('crashDumps') returned an incorrect path for Linux
- Fixed an issue where clipboard.read() could cause crashes with custom clipboard formats
- Fixed an issue which caused print settings to not work properly when printing silently
- Fixed clipboard.read to once again work like clipboard.readBuffer
- Fixed crash when using sync dialog APIs immediately after async dialog APIs
- Fixed event with invalid timestamp in trace log
更新時間：2021-11-09
更新細節：
What's new in this version:
Features:
- Added warning when ipcRenderer.sendSync() is called with no listeners for channel on ipcMain
Fixed:
- <webview> background transparency regression
- a crash when a BrowserWindow is closed subsequent to its webContents being destroyed
- a tracing agent-related crash when initializing Node.js in service workers
- an issue where Content-Disposition filenames would be incorrectly truncated at the first comma for a filename attachment which contained one
- an issue where MediaMetadata did not work properly
- an issue which caused print settings to not work properly when printing silently
- black window when screen capturing a content-protected BrowserWindow on Windows 10
- event with invalid timestamp in trace log
更新時間：2021-11-09
更新細節：
What's new in this version:
Lightning infill:
- The new lightning infill setting lets you to print high-quality top layers but is optimized to use less material and increase your production speed
Improved top surface quality:
- We’ve tweaked the Monotonic setting and made adjustments throughout Ultimaker print profiles. This removes occasional scarring on models and improves top surface quality by default.
Improved horizontal print quality:
- Resulting in reduction of ringing, improving resolution and overall print quality
App switcher:
- The new switcher provides a simpler way to navigate and use other Ultimaker applications, including Ultimaker Digital Factory, Ultimaker Marketplace, and Ultimaker 3D Printing Academy. Reporting bugs to Github is now just one click away, and it’s easier to find the application you need.
Faster start-up:
- We've shaved 10 seconds from Ultimaker Cura's start-up time by optimizing profile data caching
Other new features:
- Moved the skip button to the left bottom on the sign in onboarding page and replaced with the sign in button and Create new account
- Add {material_type} and {material_name} as replacement patterns
- Update file name after saving
- Make parking optional in all "methods" of Pause at Height
Fixed:
- Fixed a bug when combing goes through skin on Top Surface Skin Layers
- Fixed a bug in one-at-a-time mode to not wait for initial layer bed temperature if the temperature stays the same
- Fixed a bug where there was double infill and gap filling
- Fixed a bug with monotonic ironing that causes fan speed jump to 255 for ironing pass
- Fixed an engine crash when using monotonic ordering with zigzag skin pattern
- Fixed missing commas in disallowed list for code injections
- Fixed various typos
- Fixed Filament Change Retract method
- Fixed extra microsegments inserted from Wall Overlap Computation
- Fixed inconsistent material name in the header and material selection dropdown
- Fixed scaling model down after scaling it up with tool handles
- Fixed single instance option when opening different files
- Fixed duplicating and multiplying support blockers
- Fixed a bug where a random 0 was added in end g-code
- Fixed a bug in Tree support in the global and per object settings
- Fixed a bug where special characters in configuration files caused a crash
- Fixed a bug where infill goes through skin
- Fixed a bug where ironing doesn't listen to combing mode
- Fixed a bug related to the translations in the monitor tab
Printer definitions, profiles and materials:
- Added Creasee CS50S pro, Creasee Skywalker and Creasee Phoenix printer definitions
- Added Joyplace Cremaker M V1, M V2, S V1
- Added Hellbot printer definitions
- Added Arjun Pro 300 printer definition
- Added AtomStack printer definitions
- Added Weedo X40 printer definition
- Added 3DI D300 printer definition
- Changed Crealiy Ender 5 Plus end g-code
- Updated definitions and extruders of Hellbot Magna 2 230/300 dual
- Updated Eryone Thinker printer profile
- Updated FLSUN Super Racer profiles
- Updated Mega S and X acceleration to firmware default
Known bugs with Lighting infill:
- Connect infill polygons doesn't work
- Infill Wipe Distance applies to every polyline
- Infill mesh modifier density
- Infill Overlap doesn't work
- Infill before walls order doesn't respect the order when Lightning is enabled
更新時間：2021-11-04
更新細節：
What's new in this version:
- Added support for the Z 9
- Pictures can now be displayed in NX Studio as they are taken. To do so, select Show it with NX Studio for Transfer Options > When a new image is received from the camera in the Camera Control Pro 2 Tools menu and Show Image Immediately After Shooting in the NX Studio File menu.
- Ended support for 32-bit operating systems
- Fixed an issue occurring on computers running Windows 10 version 2004 or later in which the keyboard could not be used to zoom the live view display in or out, and attempting to do so would cause Camera Control Pro 2 to hang.
更新時間：2021-11-01
更新細節：
更新時間：2021-10-28
更新細節：
What's new in this version:
- Fixed an issue where MediaMetadata did not work properly
- Fixed black window when screen capturing a content-protected BrowserWindow on Windows 10
更新時間：2021-10-26
更新細節：
更新時間：2021-10-21
更新細節：
What's new in this version:
New:
- Screen Recording for computers running VNC Server 6.8.0+ and VNC Viewer 6.21.920+ with a Professional or Enterprise subscription
- Dark mode support for MacOS
- VNC Viewer can now send the connection password to a VNC Server on Windows that is at the login screen. This is useful for users that are using System Authentication to authenticate to VNC Server and saves typing in the password again, after connecting. This feature is accessible via the F8 menu for the first 30 seconds of the session.
- WinSSOAccountCheck parameter added to VNC Server on Windows to allow relaxing of Windows account status checks when authenticating via SSO. This may be useful if connecting VNC Viewer users are experiencing problems authenticating to VNC Server.
Fixed:
- VNC Server attempted to bind to invalid subnets for UDP TURN, causing VNC Server to log "TurnDgram: Received ChannelBind error (code=403)". This error will now only appear for unexpected TURN channel bind errors.
- Users would receive an "Access is Denied" error when they are part of the BuiltInAdminstrators group when NTLogonAsInteractive is enabled
- Improved: Removed extra logging that was printed to stdout when starting a Virtual Mode VNC Server on Linux with SystemXorg enabled