Krita 歷史版本列表
更新時間：2020-08-19
更新細節：
What's new in this version:
- arm - improved stability when forcing 25G speed on unsupported interface
- crs3xx - fixed QSFP+ interface LEDs when using break-out cable for CRS326-24S+2Q+
- crs3xx - fixed QSFP+ interface linking after reboot for CRS326-24S+2Q+ (introduced in v6.47)
- discovery - use "static" interface list by default instead of "!dynamic"
- fetch - show status "uploaded" instead of "downloaded" when uploading a file
- hotspot - do not verify Hotspot interface status when detecting if HTTP/HTTPS login method is allowed
- interface - added new builtin "static" interface list
- l2tp - fixed multiple tunnel establishment from the same remote IP address (introduced in v6.47)
- lora - fixed "spoof-gps" parameter padding (introduced in v6.47.1)
- lte - fixed dynamic DHCP client creation when editing APN profile
- ospf - fixed case when changing one distribution metric changed metrics for other distribution options
- ppp - fixed PPP interface editing for the first time after reboot or after 20 seconds
- qsfp - fixed break-out cable linking after reboot (introduced in v6.47)
- routerboot - fixed memory test on CCR2004-1G-12S+2XS ("/system routerboard upgrade" required)
- sfp - stabilized CRS212 SFP port functionality and improved monitoring of optical modules
- sftp - fixed "flash" directory access (introduced in v6.46)
- smb - fixed file path validation (introduced in v6.46)
- smb - fixed possible memory leak
- smb - fixed SMB server (introduced in v6.47)
- smb - limit active session count to 5 per connection
- snmp - fixed "current" value reporting on CCR series devices
- snmp - fixed "fan-speed" value reporting on CCR series devices
- wireless - added support for U-NII-2 for cAP ac
- wireless - updated "indonesia5" regulatory domain information
- www - improved WWW service stability when receiving bogus packets
更新時間：2020-08-03
更新細節：
更新時間：2020-07-10
更新細節：
更新時間：2020-07-10
更新細節：
What's new in this version:
- crs3xx - fixed HW offloading for netPower 15FR and netPower 16P devices (introduced in v6.47)
- crs3xx - fixed increased CPU temperature for CRS354-48G-4S+2Q+ device (introduced in v6.47)
- crs3xx - improved Ethernet port group traffic forwarding for CRS354 devices
- defconf - fixed default configuration generation on devices without "wireless" package installed
- defconf - fixed default configuration loading on RBmAPL-2nD
- defconf - improved default configuration generation on devices with changed wireless interface names
- dhcpv6-server - disallow changing binding's "prefix-pool"
- dhcpv6-server - improved stability when changing server for static bindings
- dns - do not allow setting "forward-to" same as "name" or "regex"
- dns - do not allow setting zero value IP addresses for "A" and "AAAA" records
- dns - do not use DoH for local queries when a server is specified
- export - fixed HotSpot "address-per-mac" parameter export
- filesystem - fixed increased "sector writes" reporting (introduced in v6.47)
- ftp - fixed possible buffer overflow
- ike2 - fixed initiator child SA init without policy
- ike2 - fixed policy reference for pending acquire
- ike2 - retry RSA signature validation with deduced digest from certificate
- ipsec - do not update peer endpoints for generated policy entries (introduced in v6.47)
- lora - added "spoof-gps" parameter for fake GPS coordinate sending
- lora - fixed JSON statistics inaccuracies
- lte - added support for MTS 8810FT
- lte - fixed modem initialization when multiple modems are used simultaneously
- lte - fixed PDP authentication configuration for SIM7600
- metarouter - fixed image importing (introduced in v6.46)
- ospf - improved route tag processing for OSPFv3
- ppp - allow specifying pool name for "remote-ipv6-prefix-pool" parameter
- profile - fixed "unclassified" load reporting on PowerPC devices (introduced in v6.47)
- qsfp - fixed auto-negotiation status
- qsfp - ignore FEC mode when set to fec91, only fec74 mode is supported (introduced in v6.47)
- routerboard - fixed "mode-button" support on SMIPS devices (introduced in v6.47)
- routerboard - fixed "reset-button" menu presence on all devices
- supout - added "LoRa" section to supout file
- switch - fixed MAC address learning on switch-cpu port for Atheros8316, Atheros8227 and Atheros7240 switch chips
- w60g - added "mdmg-fix" parameter for RBwAP60Gx3 (CLI only)
- winbox - fixed flag displaying under "IP/DNS/Static" table
- winbox - fixed minor typo in "BGP/Peer" menu
- winbox - hide irrelevant switch port parameters
- wireless - changed "station-roaming" default setting from "enabled" to "disabled"
- wireless - updated "bangladesh" regulatory domain information
- wireless - updated "egypt" regulatory domain information
更新時間：2020-07-05
更新細節：
更新時間：2020-06-29
更新細節：
更新時間：2020-06-24
更新細節：
更新時間：2020-06-18
更新細節：
What's new in this version:
Animations:
- New feature: The “Render Animation” dialog has a new option for exporting only the unique frames of an animation
- New feature: We’ve made new hotkey bind-able actions for selecting the previous/next sibling layer, for working within a single group of layers
- Fix: General animation caching improvements should lead to smoother and more consistent playback and scrubbing
- Fix: Hidden layers can now be properly edited and scrubbed in active isolation mode
- Fix: Timeline now correctly highlights the current frame when loading a new document
- Fix: Onion skins no longer become misaligned after cropping
- Fix: Presence of transform masks on the layer tree no longer glitch animation playback
- Fix: The “Render Animation” dialog’s image settings are now independent and no longer conflict with the image “Export” dialog’s settings
- Fix: The “Render Animation” dialog now correctly synchronizes HDR settings between the video and image sequence options
- Fix: Added small headers to multiple animation context menus to mitigate accidental selections
- Fix: The error message that’s shown when Krita can’t find FFMPEG now provides helpful information and a link to the official documentation
- Change: The “Isolate Layer” feature is now called “Isolate Active Layer” to better reflect how it works
Resources:
- Ramon Miranda created a new set of watercolor effect brush presets
- Bundles now properly handle timezones and show dates in the user’s preferred format
- There are a couple of new patterns by David Gowers that are good for usage with the new Palettize filter
Filters:
Gradient Map Color Mode Option:
- For the pixelart afficionado, there are two filter changes this release, both implemented by Carl Olsson. The first is the Color Mode in the Gradient Map filter. This allows setting the intermediate colors to use a dithering pattern or to restrict the colors to the nearest stop color.
Palettize Filter:
- The second feature Carl Olsson created is the new Palettize filter which works similar to the Gradient Map filter, but uses a palette to determine the colors. The Palettize filter also supports dithering:
High Pass Filter:
- The high pass filter, contributed by Miguel Lopez is, among other things, good for making images sharper. It is best applied as a filter layer set to overlay. This filter is especially useful as a final step for images uploaded to social media; the extra sharpness offsets the terrible scaling algorithms used by image hosting sites that make images blurry.
Other Filter Improvements:
- Memory leaks in the gradient map filter were fixed
- The edge detection and height to normal map filters no longer show staircase-like artifacts
- All convolution filters (like sharpen, blur) now work correctly on images with an opaque background
- The HSV filter now works more correctly on grayscale images
- The blur filter now calculates the aspect ratio correctly
- The motion blur filter now produces fewer artifacts
Layers:
- The performance of layer styles has been improved
- The separate channels function works again
- The split image dialog now supports splitting along guides dragged out of the rulers and has a nice preview as well
- Clone layers now perform much better and are much more stable
- Dialog to change the source of clone layers: another contribution by Tusooa, you can now change the source of a clone layer, and have it point at a different layer. Clone layers act like an instance of the source layer, for use in a variety of interesting effects, but it was not until now that they could be pointed at a different source layer.
Python
- ManagedColor now can also be initialized with a QColor
- Added a setDocument method to the View class
- Actions creating in Python extensions are loaded before the menus and toolbars are constructed
Painting:
- RGBA brushes: Krita now allows setting the opacity and lightness on colored brush tips separately. This allows for a number of new posibilities, amongst which the ability to get a texture remniscent of oil or acrylic impasto.
- The pixel brush engine is about 20% faster
Multi-dimension export for GIH:
- The GIMP image hose format (gih) supports multiple dimensions, so one can have several rows of brushes that can be set to randomness horizontally, and maybe increment vertically. And now Krita’s exporter supports this too, thanks to the work by Ivan Yossi!
Window Handling:
- It’s now possible to take the central canvas area out of the window and put it in its own window: the detached canvas mode is handy when you, for instance, have a big and a small screen, you can then put the image on the big screen and all the tools and dockers on the small screen.
Color Handling:
- Rendering the Lab channels is now done correctly both in the channels docker and on the canvas, thanks to L.E. Segovia.
- The color chooser no longer loses contrast when adjusting the saturation of the the HSL slider, while changing the lightness compensates better for keeping the saturation correct.
- Krita now tries to recognize the broken ICC profiles that Photoshop installs and doesn’t try to load them.
- Palettes with more than 4096 columns are now loaded and shown correctly.
- The color selectors not only perform much better but are also more correct and easier to use thanks to Mattias Wein’s work
Snapshot docker:
- Part of Tusooa’s work rewriting Krita’s undo system, the snap shot docker allows you to save certain states of progress into this docker and toggle between them.
Tools:
- Some tools come with “actions” — like increasing/decreasing the brush tip size. These actions are now created before an image is loaded, so they can be put on the toolbar.
Magnetic Selection Tool:
- Kuntal Majumder’s GSoC for 2019, the Magnetic Selection Tool, makes a free hand selection, but with a twist: it tries to align the selection to the edges it can find inside the image, simplifying the process tremendously.
New Modes for the Gradient Tool:
- Spiral, Reverse Spiral and Bilinear mode have been added by Miguel Lopez
Fill Tool and Contiguous Selection Tool (“Magic Wand”):
- The Fill Tool and Contiguous Selection Tool (“magic wand”) have been extended: you can choose between All Layers, Current Layer and Color Labeled Layers to indicate what area the tool needs to fill or select. This is particularly useful with complex multi-layer line art.
Other:
- Creating selections is now much faster
- Krita now tries much, much harder to make sure a file really is saved correctly: we check the size, the date, open the file, check the contents right after saving
- A really nasty bug was fixed by Wolthera: selections that are entirely outside the image could be saved and on loading would make it seemingly impossible to paint
- Saurabh Kumar added an option to open an image as a file layer in an already loaded image
- There is a new option to save images to .kra with all layers trimmed to the image size. This is off by default; enable it if you tend to move things outside the image boundaries and don’t want to keep that image data around between sessions.
更新時間：2020-06-18
更新細節：
What's new in this version:
Animations:
- New feature: The “Render Animation” dialog has a new option for exporting only the unique frames of an animation
- New feature: We’ve made new hotkey bind-able actions for selecting the previous/next sibling layer, for working within a single group of layers
- Fix: General animation caching improvements should lead to smoother and more consistent playback and scrubbing
- Fix: Hidden layers can now be properly edited and scrubbed in active isolation mode
- Fix: Timeline now correctly highlights the current frame when loading a new document
- Fix: Onion skins no longer become misaligned after cropping
- Fix: Presence of transform masks on the layer tree no longer glitch animation playback
- Fix: The “Render Animation” dialog’s image settings are now independent and no longer conflict with the image “Export” dialog’s settings
- Fix: The “Render Animation” dialog now correctly synchronizes HDR settings between the video and image sequence options
- Fix: Added small headers to multiple animation context menus to mitigate accidental selections
- Fix: The error message that’s shown when Krita can’t find FFMPEG now provides helpful information and a link to the official documentation
- Change: The “Isolate Layer” feature is now called “Isolate Active Layer” to better reflect how it works
Resources:
- Ramon Miranda created a new set of watercolor effect brush presets
- Bundles now properly handle timezones and show dates in the user’s preferred format
- There are a couple of new patterns by David Gowers that are good for usage with the new Palettize filter
Filters:
Gradient Map Color Mode Option:
- For the pixelart afficionado, there are two filter changes this release, both implemented by Carl Olsson. The first is the Color Mode in the Gradient Map filter. This allows setting the intermediate colors to use a dithering pattern or to restrict the colors to the nearest stop color.
Palettize Filter:
- The second feature Carl Olsson created is the new Palettize filter which works similar to the Gradient Map filter, but uses a palette to determine the colors. The Palettize filter also supports dithering:
High Pass Filter:
- The high pass filter, contributed by Miguel Lopez is, among other things, good for making images sharper. It is best applied as a filter layer set to overlay. This filter is especially useful as a final step for images uploaded to social media; the extra sharpness offsets the terrible scaling algorithms used by image hosting sites that make images blurry.
Other Filter Improvements:
- Memory leaks in the gradient map filter were fixed
- The edge detection and height to normal map filters no longer show staircase-like artifacts
- All convolution filters (like sharpen, blur) now work correctly on images with an opaque background
- The HSV filter now works more correctly on grayscale images
- The blur filter now calculates the aspect ratio correctly
- The motion blur filter now produces fewer artifacts
Layers:
- The performance of layer styles has been improved
- The separate channels function works again
- The split image dialog now supports splitting along guides dragged out of the rulers and has a nice preview as well
- Clone layers now perform much better and are much more stable
- Dialog to change the source of clone layers: another contribution by Tusooa, you can now change the source of a clone layer, and have it point at a different layer. Clone layers act like an instance of the source layer, for use in a variety of interesting effects, but it was not until now that they could be pointed at a different source layer.
Python
- ManagedColor now can also be initialized with a QColor
- Added a setDocument method to the View class
- Actions creating in Python extensions are loaded before the menus and toolbars are constructed
Painting:
- RGBA brushes: Krita now allows setting the opacity and lightness on colored brush tips separately. This allows for a number of new posibilities, amongst which the ability to get a texture remniscent of oil or acrylic impasto.
- The pixel brush engine is about 20% faster
Multi-dimension export for GIH:
- The GIMP image hose format (gih) supports multiple dimensions, so one can have several rows of brushes that can be set to randomness horizontally, and maybe increment vertically. And now Krita’s exporter supports this too, thanks to the work by Ivan Yossi!
Window Handling:
- It’s now possible to take the central canvas area out of the window and put it in its own window: the detached canvas mode is handy when you, for instance, have a big and a small screen, you can then put the image on the big screen and all the tools and dockers on the small screen.
Color Handling:
- Rendering the Lab channels is now done correctly both in the channels docker and on the canvas, thanks to L.E. Segovia.
- The color chooser no longer loses contrast when adjusting the saturation of the the HSL slider, while changing the lightness compensates better for keeping the saturation correct.
- Krita now tries to recognize the broken ICC profiles that Photoshop installs and doesn’t try to load them.
- Palettes with more than 4096 columns are now loaded and shown correctly.
- The color selectors not only perform much better but are also more correct and easier to use thanks to Mattias Wein’s work
Snapshot docker:
- Part of Tusooa’s work rewriting Krita’s undo system, the snap shot docker allows you to save certain states of progress into this docker and toggle between them.
Tools:
- Some tools come with “actions” — like increasing/decreasing the brush tip size. These actions are now created before an image is loaded, so they can be put on the toolbar.
Magnetic Selection Tool:
- Kuntal Majumder’s GSoC for 2019, the Magnetic Selection Tool, makes a free hand selection, but with a twist: it tries to align the selection to the edges it can find inside the image, simplifying the process tremendously.
New Modes for the Gradient Tool:
- Spiral, Reverse Spiral and Bilinear mode have been added by Miguel Lopez
Fill Tool and Contiguous Selection Tool (“Magic Wand”):
- The Fill Tool and Contiguous Selection Tool (“magic wand”) have been extended: you can choose between All Layers, Current Layer and Color Labeled Layers to indicate what area the tool needs to fill or select. This is particularly useful with complex multi-layer line art.
Other:
- Creating selections is now much faster
- Krita now tries much, much harder to make sure a file really is saved correctly: we check the size, the date, open the file, check the contents right after saving
- A really nasty bug was fixed by Wolthera: selections that are entirely outside the image could be saved and on loading would make it seemingly impossible to paint
- Saurabh Kumar added an option to open an image as a file layer in an already loaded image
- There is a new option to save images to .kra with all layers trimmed to the image size. This is off by default; enable it if you tend to move things outside the image boundaries and don’t want to keep that image data around between sessions.
更新時間：2020-06-18
更新細節：