Honeycam 歷史版本列表
更新時間：2019-07-09
更新細節：
更新時間：2019-06-21
更新細節：
更新時間：2019-04-23
更新細節：
What's new in this version:
- Found that with some unfavorable combination of parameters in the settings file (vcr40.ini), the port numbers are no longer remembered.
- The window with a SMART full screen is rotated: right-click the menu item "Full screen" or CTRL + A in the menu. This is still a temporary decision upon request, until a common full-screen interface appears.
- Added and improved SMART for Kingston SSD.
- The program was adapted to USB drives, in which the USB bridge converts the standard 512-byte logical sector to 4096-byte. At the same time, about 20 places were fixed in the code, and a display in the passport of drives with a non-standard size of the logical sector was added.
- Numeration of sectors began to work correctly when recording, displaying large sectors in the HEX editor. Time, scan percentages, maximum block size, and even timings are adjusted to non-standard sector sizes.
- Now, with unsuccessful REMAP, reading, writing, erasing a block and Refresh via the API - the program displays the Windows system message about this situation in the log (since it is generated in kernel32.dll, it goes immediately in the Windows language - do not be surprised). Thus, it is possible, for example, to distinguish the physical defect of the drive from the access denial because the MBR is not turned off.
- Got an A-DATA USB drive, "Nobility NH92", on which the program could not get SMART. It turned out that inside there is an idiotic USB bridge MA6116, which falls into a stupor from 16-byte SCSI commands. I had to make it possible to manually enable compatibility mode - the Old USB / SAS mode jackdaw on the Setup tab.
- Test the program with a daw and without it. On most new devices, everything should work in any state.
- Eliminated the deficiency, because of which, when receiving a passport / SMART during the scan, a timeout error occurred.
- The bug is fixed, when the disk is already selected on the passport tab, the passport is read ... and on the Advanced tab, the partition table does not allow to read before the passport has been received yet again.
- Fixed a bug due to which when reading with REMAP the program stopped after finding a defect (it manifested itself only in PIO).
- Fixed a bug due to which the pop-up menu sometimes disappeared when the scan was stopped after a defect.
- Fixed deficiencies in the procedure for stopping the HDD spindle / SSD sleep by USB. It turned out that the native SCSI command does not work on one of the USB bridges. The procedure for attempting to send an ATA command instead of SCSI via USB was added, and everything became normal.
- The error due to which the program took some SSDs for HDD during the "shaft stop" has also been fixed.
- Eliminated the reason why there could be an access violation error on fast PCs when closing the main window.
- Made prevention of the exit of program windows off the screen at startup.
- The value of "never" in the timeout parameter again, as needed, means infinite waiting time. In addition to the Refresh function, where it means "update each block."
- Returned the vertical scroll bar to the scan grid. On request.
- I returned memorization of a daw Grid on the Tests tab.
- Made it possible to disable the display of CHS-parameters in the passport due to their obsolescence.
- Added display of Smart Command Transport (SCT) parameters in drive passport.
- On the Advanced tab, you can now copy numbers from the MBR partition table to the clipboard, as well as expand the range of partition addresses into a scanned surface.
- When installing the HPA 'LBA / Mb' checkbox, now some values are converted to others immediately (previously, for this, the slider had to be moved).
- There were rare complaints that version 4.72 stopped working with IDE screws on some computers. Perhaps due to a change in the way of giving commands, but there is a possibility that the installed “Only non-destructive functions” checkbox is “guilty” on the Setup tab (its effect also changed in version 4.72). I did not manage to see this glitch with my own eyes. But just in case, I returned the DFP_SEND_DRIVE_COMMAND method, leaving the more modern IOCTL_ATA_PASS_THROUGH.
- At the request of the forum realized the "American dream": in the input / output fields of large numbers the possibility of their display with the thousands separator is added. For example: 1'953'525'167. The function is disabled on the Setup tab - the "Thousand separator" checkbox. The Separator char key appeared in the vcr40.ini file, after which you can specify the separator sign in quotes: a dot, an apostrophe, or a space. One field is left without separators, due to lack of space. After the transition "Victoria" to the new interface - will be everywhere.
- The Power-Up In Standby feature set device spin-up command has been added to the procedure for obtaining an EXT passport. This allows you to run and test the hard drive with disabled shaft promotion, for example, from some DVRs.
- Starting from version 4.73, the program goes without an exe-file packer (according to IT specialists, some antiviruses scold it), so the file size is about 2 MB (it was ~ 700 kb). This is normal and does not affect the quality of work.
- Fixed other minor bugs and made minor changes to the algorithms.
更新時間：2019-01-31
更新細節：
What's new in this version:
New features:
- RTL (right-to-left) and TTB (top-to-bottom) language support for text layers, available in this new dropdown in the Inspector
- New "script” selection in the Inspector to choose between the different character sets contained in a font. Try Noto Sans for example
New text features and improvements:
- New controls for bold, italic, underline, and strikethrough right in the Inspector
- New advanced text settings (available at this icon): Subscript, superscript, ligatures, and fractions; uppercase, capitalize, lowercase, and small caps transformations; paragraph indent and spacing. Please read more in the related article
- Ctrl/Cmd + B and Ctrl/Cmd + I now work for entire text layers, not only parts of them
- Having multiple font weights in the same text layer now shows Mixed in the Weight field
- Pressing Shift + Enter now creates a soft break, that’s not affected by paragraph spacing
- Ability to set the zoom stop with a double-click on the zoom icon in the toolbar. Please see this video
- In case you have missed it, we have a full user guide available now, that should cover all questions about Gravit Designer
Improvements:
- Improved Cloud dialog (File ? Open from Cloud... and File ? Save to Cloud...) with an overhauled appearance and some new functionality
- Ability to maximize the dialog to fill the whole window
- Search function
- Change between card view (default) and list view for a better overview and more clarity
- Files can be directly download from here now
- File operations are now only available when selecting files. Alternatively, you can also use the context-menu. Please see this video
- Massively improved support for non-Latin character sets, including Arabic and Hebrew, Cyrillic, Chinese, Indic, Japanese, Greek, Georgian, Vietnamese, Persian, Burmese, and more
- Pasted text is automatically detected and switches to the correct font
- Web Fonts now include new Noto Sans font families, enabling you to use these character sets right away
- Enabled proper line breaks for Asian characters
- Renamed Settings to Account settings in the user dialog for more clarity
- Reorganized options in the Help menu in the toolbar
- Updated Web Fonts to include all the shiny new Google Fonts
- Added proper checkmarks for all options in the toolbar in the MacOS app
- Continued improving SVG support
- Made more efforts to improve the performance of Gravit Designer
Bugfixes:
- Social logins (Facebook, Google) now have a proper close button
- Worked on reducing rendering artifacts
- Fixed various bugs for the light theme
- Having the context-menu (right-click) open and pressing Esc doesn’t leave Edit mode anymore but only closes the context-menu
- Shapes clipped to text layers are now properly exported to SVG
- Ensured that Show Version History (from the File menu) works reliably and doesn’t loose any progress
- The message shown when entering Fullscreen mode (from View ? Toggle fullscreen...) is now displayed correctly in the light theme
- Trying to access a PRO feature in free mode now shows the correct dialog again
- Logging in now works properly on Chrome OS and in the the Chrome extension
- Solved an issue that screwed up the canvas and rendered it unusable
- Icons from the Libraries can now be inserted properly again
- Fixed various issues with angular gradients in Firefox
- By the way, if you didn’t notice it yet: We switched to a new version naming, that puts less emphasis on the version number, but rather uses a subsequent number for each release throughout the year
更新時間：2019-01-28
更新細節：
What's new in this version:
- Support Nitro+ Vega series and Nitro+590 series
更新時間：2018-12-12
更新細節：
What's new in this version:
- Support SAPPHIRE NITRO+ RX 590 Series
更新時間：2018-11-28
更新細節：
What's new in this version:
- Stability improvements and bug fixes related to Drawing feature
更新時間：2018-11-28
更新細節：
What's new in this version:
New features:
- Importers for Evernote (.enex) exports, Simplenote (.json) exports, and plain text files
Enhancements:
- Revamp auto updater
- Disable checkboxes and hide bullets in Markdown preview of task lists
- Add preview styling for <kbd> tags
- Add markdown property to the JSON file of exported notes
- Improve keyboard support for modal dialogs
- Show focus outlines on buttons and other controls when navigating with a keyboard
- Strip Markdown in note list excerpts (with the exception of ordered and unordered lists)
Fixes:
- Fix a crash bug that occurred when clicking the Share button immediately after selecting a tag in the tag drawer
- Remove outdated help text in the Share dialog
- Fix “bad quality package” error on Ubuntu
- Fix the Sidebar toggle button not working immediately after launch
- Make the Revisions selector full-width when in Focus Mode
- Fix issues with some buttons that were not friendly to screen readers
- Add a Back button for trashed notes in single-column view
- Fix line spacing when printing a Markdown
- Fix margin on Publish icons in the note list
- Various security and under-the-hood improvements
更新時間：2018-11-23
更新細節：
What's new in this version:
- Stability improvements and bug fixes related to Drawing feature
更新時間：2018-11-15
更新細節：
What's new in this version:
- New: Insert text and draw
- Stability improvements and bugfixes