HeavyLoad 歷史版本列表
HeavyLoad (32-bit)HeavyLoad (64-bit)
更新時間：2019-07-13
更新細節：
更新時間：2019-07-13
更新細節：
更新時間：2019-07-13
更新細節：
更新時間：2019-07-13
更新細節：
What's new in this version:
Rocrail 15688 (64-bit)
- Change log not available for this version
Rocrail 15671 (64-bit)
- Desktoplink.sh: comment added
- Loc: trigger corrections for virtual timers
- Desktoplink.sh added for linux ZIP
- Zipper: create packege/history if needed
- Rocrail png icon added
Rocrail 15662 (64-bit)
- Change log not available for this version
Rocrail 15640 (64-bit)
- Removed wiringPI library
- Rocnetnode: added /dev/ttyAMA0 selection for dcc232
- Mbus: trace correction
- Dcc232: revert gpio
- Dcc232: WIP
- Dcc232: gpio WIP
- Dcc232: gpio WIP
- Dccd232: gpio WIP
- Analyse: fix for zoffset (Lothar)
Rocrail 15615 (64-bit)
- Zipper.sh: typo
- Zipper: linux support added
- Rocview.cmd: use absolute path for server binaries
- Zipper.sh: copy zip to package
- Zipper: $1 for w32/w64
- Zipper script added
- Rocview.cmd for zip installer
- Model: remove attribute modplan
- Text: replace pipe with
in case of html and concat
Rocrail 15608 (64-bit)
- Change log not available for this version
Rocrail 15604 (64-bit)
- switch: test trace twin address
Rocrail 15602 (64-bit)
- Change log not available for this version
Rocrail 15594 (64-bit)
- Change log not available for this version
Rocrail 15585 (64-bit)
- Infodialog: removed obsolete adjustminsize flag
- Donkeydlg: layout corrections
- Wsocket: trace correction in case the hostname query did fail
- Infodialog,rocguiinidlg: layout and translation corrections
- Donkey: added missing dialog title
Rocrail 15574 (64-bit)
- Control: tracelevel correction for action state does not match
- Rocweb: added text click command
Rocrail 15570 (64-bit)
- Canservice: report as CANID=0 and NN=0
- Text: fix for model command change
- Canservice: use same CANID and nodenumber as the GC1e in case of service on 5550
- Modplan: add all system actions
- Text: center option added
Rocrail 15558 (64-bit)
- text: fix for check action state
Rocrail 15554 (64-bit)
- Control: trace correction
- Mbus utils: fix for MERG standard CAN frame ID
- Canservice: avoid looping without sleep in case of tcp socket error
- Canservice: fix for standard ASCII frame
- Canservice: ascii framing support added
- Xmlscriptdlg: text commands added
- Text: click state for triggering actions added
- Modplan: read/save tour, waybill, link, weather, lightctrl and mvtrack
- Modplan: read and save module systemactions
- Modplan: read module system
Rocrail 15544 (64-bit)
- modplan: use modzoffset on modify; move, rotate
Rocrail 15543 (64-bit)
- Change log not available for this version
Rocrail 15533 (64-bit)
- Block: fix for action call for occupied
- Modplandlg: file dialog buttons added for loco and route xml
Rocrail 15531 (64-bit)
- Wrapper: default 3 trace files
Rocrail 15530 (64-bit)
- Location: fix for maxocc zero
- Route,switch: check if the switch has an address set on empty commands
- Switch: check for valid command
- Locationsdlg: layout correction
- Locationsdlg: layout correction
Rocrail 15525 (64-bit)
- mbus: support for UID in system commands and events
Rocrail 15518 (64-bit)
- Mbus: reject fnchanged -1
- Ocation: maxocc per cargo type
- Location: max commuter option added
Rocrail 15515 (64-bit)
- Schedules: reset callerid and callertype
Rocrail 15515 (64-bit)
- Control: set the IID in the callerid variable
- Check4redsignals option added, default off
- Wmz21: ignore bidikmh
- Mbus: send lights(f0) also after the speed/dir commands
Rocrail 15510 (64-bit)
- Win64 build: strip debug info
Rocrail 15506 (64-bit)
- System actions: sub state implemented for IID
Rocrail 15505 (64-bit)
- Location: disregard maxocc if the loco already did arrive
- Set UID to 21 if zero to be compatible with previous revisions
- Locationdlg: removed deprecated adjust flag
- Set uid on state report
Rocrail 15504 (64-bit)
- Change log not available for this version
Rocrail 15503 (64-bit)
- Change log not available for this version
Rocrail 15500 (64-bit)
- Trace: fix for empty trace file name
- Z21: uid field added
- Clntcon: fix for ping and reply with pong
- Rcon: reactivate the 5s idle ping
- Mqtt-cs: serial connect added
- Clntcon/rcon: set keepalive socket option
Rocrail 15498 (64-bit)
- Change log not available for this version
Rocrail 15494 (64-bit)
- Planpanel: save scroll position
- Mqtt-cs python example extended with XML parsing
Rocrail 15492 (64-bit)
- Item/guiframe: restore throttle position and size dependent from loco ID
- Rocview makefile: fix for wxsubincl 3.0 -> 3.1
Rocrail 15486 (64-bit)
- Signal: white address as bit pattern if port is zero
- Rocwebworker: support for https
- Rocwebworker: support for https
- Tracedlg: fix for close event (X)
Rocrail 15482 (64-bit)
- Rocweb: http return code correction for plan and options xml
- Evaluate function event
- Function control type added
- Translation merge: fr
- Xmlscriptdlg: replaced settargetrange with the 3.0 start/end function
- Aboxdlg: layout fixes
- EStW: threeway symbol added
Rocrail 15475 (64-bit)
- Change log not available for this version
Rocrail 15470 (64-bit)
- Xmlscriptdlg: try to select the complete invalid line
- Xmlscriptdlg: select invalid XML line
- Xmlscriptdlg: select text from invalid XML
- Block: fix for service wait
- Output: function type added
Rocrail 15465 (64-bit)
- Block: revert put out of operation behaviour in case from dialog
- Xmlscriptdlg: find added
- Xmldlg: find added
Rocrail 15462 (64-bit)
- Model: trace level correction
- Block: crosscheck fix for service
- MBUS: not evaluating type in case of UID zero
- Cv index support for accelleration and calibrating
- Xmlscript: block throttle command added
- Locdialog: show CV index in grid
- Mbus,rocpro: mfx cv index support
- Block: fix for wait and service
- Block: check if occupied in case of modify and new state should be close
Rocrail 15453 (64-bit)
- Tt: set accessory bit in case of f6915
- Xmlpointsize default set to 11
- Manifest: removed dpiAwareness
- Xml: add wrap and pointsize attribute
更新時間：2018-12-27
更新細節：
What's new in this version:
vMix 21.0.0.60
- Added support for alpha channel when using XSplit VCam
- Improved performance when using API to update multiple text fields
vMix 21.0.0.59
- Added support for alpha channel when using XSplit VCam
- Improved performance when using API to update multiple text fields
vMix 21.0.0.58
- Fixed GPU render time issue when using the List input after a long period of time
vMix 21.0.0.57
- Fixed login issue with Twitch
- Added workaround for issue with codecs that don't correctly support more than 4GB of memory
- Fixed frame offset issue during Replay transitions
- Fixed ColourCorrectionReset shortcut not correctly resetting Gamma
- Fixed issue with VST3 plugins that have duplicate names
- Fixed issue with FFMPEG recording 29.97p in EU
- Fixed vMix Social issue when Windows region set to Turkey
vMix 21.0.0.56
- Fixed issue with ButtonPress activator on the APC Mini
- Fixed List tab not refreshing when saving Video Delay clips to a list
- Added error messages describing when Camera or Microphone access is disabled in Windows Privacy settings
- Improved compatibility with new NDI support in Skype
vMix 21.0.0.55
- Recalibrated skin tone line in Vectorscope for better accuracy
- Added new recommended Periscope streaming quality presets
Fixed some issues with new Kona HDMI card and added support for the following modes:
- Up to 4K60 on Input 1 + 2x HD on Input 3 and 4
- Up to 4K60 on Input 1 + 4K30 on Input
- Up to HD60 on Inputs 1,2,3 and 4
vMix 21.0.0.53
- Fixed support for streaming to Facebook Groups
- Fixed auto creation of Facebook streams when description was left bank
vMix 21.0.0.51
- Fixed issue logging in to Facebook with Two Factor Authentication in some countries
- Updated Facebook permissions to support latest security requirements for Groups
- Fixed issue where vMix Call return video freezes or becomes garbled when changing sources
- Fixed rare error that may occur when closing vMix on slower systems
vMix 21.0.0.50
- Improved recording quality in Replay when using 1080p sources
- To enable, select 200 Mbps as the bitrate before adding the replay session to vMix
- Previously 200 Mbps would only have an effect on Interlaced sources
- Relaxed video format restrictions with AJA capture devices
New rules are as follows:
- All outputs must be in the same "clock family". (29.97/59.94 or 50/25)
- Port 1 must be in same clock family as outputs if used as an input channel
- Ports 2+ will accept any input format
- Fixed some rare issues with AVI codecs
vMix 21.0.0.49
- Change log not available for this version
vMix 21.0.0.47
- vMix Diagnostics is now included with install and can be found from the "hamburger" menu in vMix or in the start menu
- Detects any background applications that may interfere with the graphics card causing errors, flickering and performance issues
- Fixed replay bug when trying to play back incomplete events
- Fixed issue where PTZ Optics ZCAM provider did not appear in PTZ dropdown list
vMix 21.0.0.45
- Fixed issue with SetAudioFade when used with List input
- Improved CPU usage accuracy
- CPU/GPU warnings are now disabled by default
- Can be enabled under Settings -> Performance.
- When disabled, will still be reported in the logs to help assist our support team
vMix 21.0.0.44
- Additional bug fixes for Sony BRC series VISCA over IP support
- Will now no longer attempt to reconnect to Facebook streams that have expired
vMix 21.0.0.43
- Improved performance of local desktop capture on desktop PCs
- Added support for Sony BRC series PTZ cameras using VISCA over IP
- Fixed issue with audio only NDI outputs not appearing
vMix 21.0.0.42
- Fixed memory issue with VST3 plugins, especially with latest Windows 10 update
- Video frame delay now supported on NDI and VLC inputs
- Added "Custom Multi-Bitrate" dropdown option in streaming destinations.
- This allows custom URLs and Stream Keys for each stream without using separate streaming instances for each which may cause problems with some CDNs
- Fixed issue in vMix Social where Overlay was sometimes triggered before content in title had been updated
更新時間：2018-02-12
更新細節：
What's new in this version:
Outputs:
- Two additional independent outputs for vMix Call, Replay and NDI (Pro and 4K editions only)
- Second recorder with an independent recording format that can be assigned to one of the 4 outputs. (Pro and 4K editions only)
Production Clocks:
- New Dual Production Clock can now be enabled from Settings -> Options
- Each of the clocks can display either the current time, recording duration, streaming duration or a countdown to an event
- Clock display can also be added as an input which can be assigned to the MultiView Output
- Clock input can also be enabled as an NDI source on the network, providing a mobile clock that can be displayed anywhere using the free NDI tools!
vMix Call:
- Audio and Video sources sent to guests can now be changed independently at any time from the right click menu
- All vMix editions including Basic HD can now connect to a remote vMix Call running HD or higher
- New Low Latency option added. This can be used on reliable, high bandwidth point to point connections where the lowest possible delay is required
Audio:
- New Channel Matrix option available for every input that supports audio
- Provides a 8x16 channel audio router to every input that can be assigned to any of the audio output buses in any combination
- Live audio meters added to each channel in the Input Channel Mixer
Streaming:
- Improved streaming settings layout
- Each of the 3 destinations now supports independent bitrate and resolution settings
- Hardware Encoder can also be controlled independently on each stream to assist with systems where GeForce cards only support 2 encoders at a time
PTZ:
- Added new Visca Over IP support to connect to newer Sony SRG series cameras in addition to the new IP model from Lumens
Titles:
- Added support for controlling NewBlue Titler Live 3.0 via NDI
- Supports commands such as AnimateIn, AnimateOut which can be accessed from the Input right click menu or assigned to controllers using the new shortcut function NDICommand
- Supports live editing of Titler Live templates from within the vMix Title Editor and Web Controller, with the ability to assign data sources as well
- vMix now includes the vMix Title Pack for free! This includes 36 additional templates including scoreboards and lower thirds.
Other:
- Added support for X-keys XK-68 Jog/Shuttle controller
- Improved CPU usage when streaming, particularly with 4K
- Improved performance with 4K Magewell capture cards
- New TCP API for embedded devices. See Developer Information in the help for more information
更新時間：2016-08-19
更新細節：
What's new in this version:
- Please note: Windows XP and Server 2003 are no longer supported
- Bugfix: The test method "Stress GPU" was unable to load textures to produce GPU utilization with current OpenGL drivers. The component used to produce the textures has been updated
- Bugfix: Under Windows 10 individual CPU cores could not be utilized separately. This error has been fixed. The load threads allocated now explicitly individual CPU cores
- Bugfix: The base load of HeavyLoad (when running without active tests) could be reduced to less than 5%. The load was caused by the calculation of real free memory in the StatusBar
- The "Simulate Disc Access" test now uses the latest version of TreeSize Free (v3.4.5)
更新時間：2016-08-19
更新細節：
What's new in this version:
- Please note: Windows XP and Server 2003 are no longer supported
- Bugfix: The test method "Stress GPU" was unable to load textures to produce GPU utilization with current OpenGL drivers. The component used to produce the textures has been updated
- Bugfix: Under Windows 10 individual CPU cores could not be utilized separately. This error has been fixed. The load threads allocated now explicitly individual CPU cores
- Bugfix: The base load of HeavyLoad (when running without active tests) could be reduced to less than 5%. The load was caused by the calculation of real free memory in the StatusBar
- The "Simulate Disc Access" test now uses the latest version of TreeSize Free (v3.4.5)