GoodSync 歷史版本列表 Page126

更新時間：2019-04-09
更新細節：

更新時間：2019-04-08
更新細節：

更新時間：2019-04-07
更新細節：

更新時間：2019-04-04
更新細節：

更新時間：2019-04-04
更新細節：

What's new in this version:

GoodSync 10.9.30
- S3: Fixed errors in header names that resulted in Bad Signature error
- GSTP client: reduced timeouts, for faster reconnects
- GSTP client: Fixed connection history management, to better try Direct connection when needed
- GSTP server: Direct Server: Fixed Sessions were not cleaned up
- GSTP server: Deprecate Basic Auth use only Digest Auth
- GSTP receiver: Improved reconnect latency, make it faster
- Logging: Fixed HTTP transactions were logged at Details level.


GoodSync 10.9.29
- GSTP server: Fixed Server may get no Assigned Forwarder, show error 'Update your Server to latest version'
- GSTP Server: Fixed re-asking for results of a long-running transaction
- GSTP Forwarder: more fixes for faster reconnects
- MS Graph FS (Office 365, SharePoint): List additional root sites under /sites
- Backblaze B2: Upload of short files,: Do not reuse URL of 'b2_get_upload_url', always get a new URL
- Fixed NTLM auth, used in IIS and Windows Server
- Localization: Fixed localization of GoodSync Account setup was not working


GoodSync 10.9.28
- GsRunner + UnAttended jobs: Drop log lines if GUI did not pick them up, fixes memory leak
- Gs2Go: Allow portable volumes to have Disk Letters A: and B: as diskettes are long gone
- MS Graph: Added support for reading paged responses to /groups query
- GoodSync Account Setup: No Mediator mode: Do not check for dup users or computers on Mediator
- GoodSync Account Setup: No Mediator mode: Allow to keep existing user, after warning
- GSTP Client: if Server got no external port, do not try Direct connection, it is waste of time
- GSTP client: rewrite direct/forwarder decision, to switch faster and more accurately
- GSTP Server: When switching from Forwarder mode to Direct mode, stop Receiver and wait for it
- GSTP Server: Direct mode: finer per Session locking, not per User
- GSTP Server: Fixed Sessions that were Disconnected with Error were not released (memory leak)
- GSTP Server: Make sockets of properly closed sessions linger for 10 sec, for client to receive
- GSTP Server: Pickup Receiver: made it work better when we have lost connections
- GSTP Server: Web UI: improved Settings presentation
- GSTP Server: UDP receiver: Fixed could cycle on multiple UDP receive errors
- GSTP Forwarder: reject inactive sessions on server side sooner, do not let them linger
- GSTP Forwarder: increased speed and stability by more holistic locking mechanism
- GSTP Forwarder: Allow User Forwarders, if user sets 'UserForwarder = Yes' in settings.tix
- License on Linux: fixed Licensing by finding working PNEs, not just eth0/1.


GoodSync 10.9.26
- GsRunner Service: Fixed GsRunner did not come back after Sleep and Wakeup
- GS Account Setup: Computer page: Check that proposed Computer name does not already exist
- Mediator does not allow connecting to Computer if two devices registered under this one name
- Mediator does not allow GSTP-2 protocol, so all GSTP computers must be updated to latest ver 10 or 9
- Forwarders: improved and speed up reconnect sequences
- Activation: if user enters License Key (Batch Code) into OrderID, advise him to do it in GS Account online
- Browse dialog: fixed crash on non-recognized URL
- MEGA FS: Added support for 2-factor authorization
- New CZ localization


GoodSync 10.9.25
- gs-server + Mediator: Fixed registration was happening too often, if no UPNP is present
- Forwarder/GsServer: give client more time to close connection or send EOF
- gs-runner: Use dynamic ports, if default port 33555 is taken
- gs-server: Use dynamic port, if default port 33333 is taken
- GSTP with no UDP: make it work faster by using Pipe Forwarder
- GSTP file close: increase allotted time, so that it can complete
- GSTP client: improved switching from Direct to Forwarder and back
- GSTP receiver: fixed several issues, to speed up session pickup
- Gs and Runner Installer: improved some sequences


GoodSync 10.9.24
- GS-runner integration with GUI: Change it from Shared Memory to socket-based protocol
- Unattended Jobs: show percent of completion, not just general status
- Unattended Jobs: show rolling log, as sync progresses, not the final log at the end of sync
- MS graph (OneDrive, Office): Fixed downloads running over 1 hour produce Auth error
- GSTP: improve speed of reconnect on Receiver Server, if connection is lost on Client side
- RDC tunnel: make it work again, use correct connection type on remote end
- CC Runner: Fixed first AutoUpdate of CC Runner was picking up regular GoodSync
- CC Runner: Fixed user profile was incorrect on initial setup, so log cleanup was too broad
- No Mediator option: show it only for Windows Server and File Server installers
- License Check: do it for GoodSync Account too, wait 60 sec after wakeup from sleep
- Permissions: correct translation of ReadOnly flag from Windows to Linux
- Storage Beta: now allow 100 Gb storage trials


GoodSync 10.9.23
- GSTP: now retries upon error are initiated only by Client, never by Server
- GSTP: improved and speed up cloning of new Sessions via existing Session
- GSTP client: test of Direct conn upon Forwarder conn is done only if we had Direct conn before
- GSTP client: If Server has no UDP port, still wait for connection to be picked up
- Forwarder: do not allow Server-retried Sessions to linger, only Client can make it alive
- DAV: Set Content-Type: mime-type header on Upload, so that file gets proper MIME type
- MS Graph: Fixed error processing on uploads, so that Refresh Token can happen
- MS Graph: improved error processing when getting user credentials
- Load Jobs Groups: do not auto-save if changes were detected on load, wait till user save
- CC Runner, Gsync runner: Cleanup all logs every hour (60 min), not just in GUI
- License Activation: Remove Batch activation, as it should be done in GoodSync account online
- Sort list of displayed Job Groups, in Groups context menu of Job
- Fixed temp file name generation, so it does not produce dups in high speed processing
- Account Web UI: Password Reset: Do Not delete accounts upon confirmation, instead merge them.


GoodSync 10.9.22
- GSTP client: get to direct connection faster, when previously direct gs-server goes back online
- GSTP receiver: more fixes in error processing
- GSTP forwarders: more aggressive cleanup of dead sessions, so that they don't linger
- GoodSync Account Setup: make Not Serving Files option stick properly after restart
- GSTP UserId: do not lowercase GSTP UserId, as it can have upper-case letters in legacy accounts
- GSTP UserId: for all new accounts UserId is derived from Email, and it is always lower-case


GoodSync 10.9.21.1
- Licenses: Fixed License Change notification comes up every 22 hours, even if nothing is changed
- Licenses: When activating from Mediator ver 11 style, delete Encrypted Server Data before writing License
- Create actual installers for File Server and Enterprise Workstation AutoUpdate and Licenses for them
- Uninstall: less waiting for post-uninstall browser, so that it does not hold up uninstall completion
- GoodSync Account Setup: Show Yes/No for Serve Files options, to better explain the No option
- GoodSync Storage: implemented Storage Licenses and Activation
- GoodSync Account UI: added Merge Accounts


GoodSync 10.9.20.4
- Job List: added more locks on Job List operations, to prevent crashes
- Closing GoodSync: fixed rare crashes when Asian keyboards are present
- MS Graph FS: Fixed 'Resolve URI: resolve special path: no slash'
- Browse Dialog: fixed wrong file System selected from SFTP down
- DropBox, WebDAV: improved exponential backoff on codes 503 and 429
- GS Storage: Added Usage, Transfer and Transactions measurement


GoodSync 10.9.19.5

Support new GoodSync Account:
- Activate
- License Check
- Manage Account: auto-login
- Contact Support: auto-login


GoodSync 10.9.19.0
- Tools: Renamed GoodSync Connect Setup to GoodSync Account Setup
- Tools: Added GoodSync Account Manage that Auto-Logins to GS Account web site
- Help - Buy License: specify GoodSync UserId to PUMS, for purchase attribution
- Help - Contact Support: Auto-Login to GS Support System, if GS Account is present
- Activation dialog: make activation via GoodSync Account work properly
- Gs2Go + GoodSync Account: treat USB drive as a virtual Device
- gsync: Add GoodSync Account integration commands /manage-account /buy-license


GoodSync 10.9.18.0
- Activation dialog: Add option to perform activation via GoodSync Account
- Add License Management to GoodSync Account
- GSTP: Report ComputerID to Mediator, so that activated licenses can me matched to Device
- GSTP Client: Fixed reconnect sequence, it was not always retrying
- GSTP Forwarder and Server: fIxed ticket management, to address a case of Mediator restart
- Dropbox: Recover from incorrect_offset errors on large file uploads
- S3, Azure: Added MIME type application/x-mpegurl for extension m3u8


GoodSync 10.9.17.0
- Licenses and Activations: more fixes related to license checks
- New Job Dialog: Make Backup (not Sync) to be the First / Default choice for Job Type
- CC Runner Installer: add options to install CC Runner as Service
- CC Runner Installer: remove rarely used option for Account Password and PIN.


GoodSync 10.9.16.0
- Improve new user experience: no post-update page, more noticeable dialog
- GoodSync start: Encourage users to create GoodSync Account, but allow to Skip it
- GoodSync2Go: allow GoodSync Account in Gs2Go setup and encourage to add it
- Installers: Reset Downloaded from Internet flag, so that installed EXEs do not show warnings
- Browse: Hide old msdrive:// file system, as it is now fully replaced by msgraph://
- MS Graph: Fixed "scope" parameter not stored in FS token cache
- CC Runner Service: Fixed The service did not start due to a logon failure
- Explorer: Fixed upload from SMB does not work
- Use canonic names for executables, no -v10 or -v9 suffix: GoodSync.exe not GoodSync-v10.exe
- License File: change license file format, to prepare for Ver 11
- Gs-server: Fixed registration did not work, if External port is manually assigned
- Sib-socket: better handling for IP v6 addresses
- Mediator: Fixed User NotFound error in Retrieve resulted in closing socket
- Pipe Forwarder: fixed errors in disconnect sequence
- Gs-server consumer: Increase unique clients allowed from 4 to 6
- Turn On by default Program Options -> Security -> Save Password Encrypted
- Gs-server + Network Arrival: Listen for Network Connected / Disconnected events
- Gs-runner + Device Arrival:: listen for this in Runner too, not just in GUI
- Resources: fixed file versions and manifests for all GS executables
- Crash Catcher: Added DbgHelp.dll for x64, 32-bit DLL is not enough
- GoodSync2Go + V9: made GoodSync2Go.bat start GS2Go correctly


GoodSync 10.9.15.1
- GoodSync start: Encourage users to create GoodSync Account, but allow to Skip it
- GoodSync2Go: allow GoodSync Account in Gs2Go setup and encourage to add it
- Installers: Reset Downloaded from Internet flag, so that installed EXEs do not show warnings
- Browse: Hide old msdrive:// file system, as it is now fully replaced by msgraph://
- MS Graph: Fixed "scope" parameter not stored in FS token cache
- CC Runner Service: Fixed The service did not start due to a logon failure
- Explorer: Fixed upload from SMB does not work
- Use canonic names for executables, no -v10 or -v9 suffix: GoodSync.exe not GoodSync-v10.exe
- License File: change license file format, to prepare for Ver 11
- Gs-server: Fixed registration did not work, if External port is manually assigned
- Sib-socket: better handling for IP v6 addresses
- Mediator: Fixed User NotFound error in Retrieve resulted in closing socket
- Pipe Forwarder: fixed errors in disconnect sequence
- Gs-server consumer: Increase unique clients allowed from 4 to 6
- Turn On by default Program Options -> Security -> Save Password Encrypted
- Gs-server + Network Arrival: Listen for Network Connected / Disconnected events
- Gs-runner + Device Arrival:: listen for this in Runner too, not just in GUI
- Resources: fixed file versions and manifests for all GS executables
- Crash Catcher: Added DbgHelp.dll for x64, 32-bit DLL is not enough
- GoodSync2Go + V9: made GoodSync2Go.bat start GS2Go correctly


GoodSync 10.9.14.4
- Browse: Hide old msdrive:// file system, as it is now fully replaced by msgraph://
- MS Graph: Fixed "scope" parameter not stored in FS token cache
- CC Runner Service: Fixed The service did not start due to a logon failure
- Explorer: Fixed upload from SMB does not work
- Use canonic names for executables, no -v10 or -v9 suffix: GoodSync.exe not GoodSync-v10.exe
- License File: change license file format, to prepare for Ver 11
- gs-server: Fixed registration did not work, if External port is manually assigned
- sib-socket: better handling for IP v6 addresses
- Mediator: Fixed User NotFound error in Retrieve resulted in closing socket
- Pipe Forwarder: fixed errors in disconnect sequence
- gs-server consumer: Increase unique clients allowed from 4 to 6
- Turn On by default Program Options -> Security -> Save Password Encrypted
- gs-server + Network Arrival: Listen for Network Connected / Disconnected events
- gs-runner + Device Arrival:: listen for this in Runner too, not just in GUI
- Resources: fixed file versions and manifests for all GS executables
- Crash Catcher: Added DbgHelp.dll for x64, 32-bit DLL is not enough
- GoodSync2Go + V9: made GoodSync2Go.bat start GS2Go correctly


GoodSync 10.9.12.2
- Snapshots + VSS: Fixed snapshots were not working
- gs-server: Fixed 'Empty ServerId' error on some reconnects
- gs-server: Speed up reconnects, by doing fewer transactions
- MS Graph: Recover from 416/fragmentOverlap error on large file uploads
- Browse Dlg: Fixed drilling into non-listable folder was not working
- Browse Dlg: Convert GSTP URLs to new prefixless internal format: server/file:/// to server/
- Browse + GSTP: Fixed clicking different servers fast may result in wrong listing
- GSTP client: Fixed talking to old servers (ver < 10.8.9) did not work
- GSTP client: Fast cloning of connections for parallel workers
- Explorer: speed up ConnectServer task, make it easier to stop
- Explorer + S3: allow deleting (but not renaming) buckets


GoodSync 10.9.11.1
- Browse Dialog + Multi-Select: fixed crashes, fixed several bugs
- UPNP: Speed up and fix UPNP discovery in case a lot of UDP packets is received
- Synclib: Fixed crash in 'Source file size is not the same as Destination file size'
- Sync Progress: Fixed progress in sequence Sync, Stop, Sync again
- When installing CC Runner GUI, stop and remove CC Runner Service for the same user
- Localization: impproved CN, ZH, UA localizations


GoodSync 10.9.10.5
- UPNP discovery: Bigger rewrite, to speed up and simplify Port Forwarding
- gs-server + Quota: Fixed 'Cannot convert to GSIO path' error
- GSTP Tunnel for RDC: Fixed errors on closing of Tunnel by Server
- GSTP client: CloneAndConnect: Faster cloning of connection via Forwarder
- Mega FS: Fixed 'Cannot get file fingerprint' error on really old files


GoodSync 10.9.9.7
- gs-server UPNP discovery: many improvements in UPNP discovery, add SSDP monitoring
- gs-server: Fixed issues in Dynamic Port bind, if preferred port is busy
- gs-server Quota FS: multiple fixes in quota computation
- Mediator: Fixed chaining of grants: (A, B) + (B, C) = (A, C): propagate all properties
- Mediator: When creating Share, first make sure this is unique: ToUserId, ToCompId, ToFolderName
- AutoClear: Do not go into Waiting for User, if AutoClear was performed
- AutoClear: Show Tree when AutoClear is specified and we have Conflicts
- Analyze + Sync: Fixed sync tree was not shown On Analyze+Sync when conflicts are present
- Explorer + RDC: Move calling Remote Desktop from Bookmark List to Server context menu
- Browse Dialog + Multi Select: Do not allow selecting folders from diffrent servers
- Browse: If connecting to Server Root we have Home Folder, navigate to Home Folder instead (FTP, SFTP)
- More optimizations at compile time


GoodSync 10.9.8.8
- GSTP-3: Fixed checking of Proxy was wrong, when determining if we do Pickup Forwarder
- GSTP-3: Better algorithm for determining when to try direct connection
- UPNP: faster UPNP discovery, so that we get external port faster
- UPNP: redo UPNP discovery, if our IP external/internal address changes
- Ver 9 + GSTP-3: make GSTP-3 work in GoodSync Ver 9
- Ver 9: Fixed in Browse dialog clicking file system in the list was showing wrong info


GoodSync 10.9.7.7
- GSTP-3: new version of GSTP protocol: establishes connections faster, better scalability
- GSTP-3 computers (ver ≥ 10.9.7) cannot talk to GSTP-2 computers (ver < 10.9.7)
- So all your computers must be running GoodSync ver ≥ 10.9.7 or ver < 10.9.7, but not mix of both
- GSTP client: fast cloning of connections, speeds up startup of Sync with many threads
- GSTP client: do not list shared computers that are offline, cannot connect to them anyway
- GSTP server: fixed Session pickup may not work on 2nd and later attempts
- GSTP forwarders: present full certificate chain to clients
- GSTP server: fixed Protect System Files feature, adjust to new paths
- GSTP server: fixed GetFileOwnerACL not implemented
- For Windows Server: Increased max number of simultaneous connections from 10 to 15
- Localization: Fixed cannot open file 'C:/Program Files/Siber Systems/GoodSync/en-english.rfi'
- Amazon CD: Added retry on HTTP error 504 Gateway Timeout
- MS Graph: Use token cache file msgraph-fs-cache.tic, just like we did in OneDrive
- MS Graph: Added more file types that cannot be resolved by-path
- Ticket Upload: Show progress of ticket upload, as it can be a time-consuming process
- CC Runner Installer: When updating CC Runner, do not start CC Runner from System Account
- License and Privacy: keep License Agreement and Privacy Policy in separate files


GoodSync 10.9.6.6
- Sync Speed: Fixed excessive locking was slowing down GS GUI when speed limit is low
- Installer: Fixed unchecking Register Desktop still caused Desktop shortcuts coming back
- Installer: Fixed New User was not detected
- Gs2Go Installer: Do not allow install, if no drive is selected
- Google Drive: recovery from missed changes or change latency leaving non-existent file info in cache
- Google Drive, Team Drive, Docs: Fixed order of OFC changes concerning single item
- MS Graph, OneDrive Personal: process incorrect 206 Partial Content returned by MS servers
- gs-server: Show Home Folder in Top Level only if gs-server is logged in as real Windows user
- WinFileSys Elevation: Fixed paths used for SMB shares in elevation
- CC Runner: Service and GUI: Fixed AutoUpdate of CC Runner Service switches to CC Runner GUI
- Explorer: Fixed Copy/Paste from/to Encrypted FS was not working, if not top level
- Explorer: Copy/Move files: always connect two file systems, or it can fail on Encrypted FS
- License: If license file has incorrect size then save a copy of it, for reporting
- License: If we encounter empty Activation ID in stored license file, report an error
- AutoInstall in AutoUpdate: Turn it On by default


GoodSync 10.9.5.5
- GoodSync2Go installer: Fixed several bugs, improved usability
- GoodSync2Go installer: Do not elevate Gs2Go installer
- GS Connect Setup: Improved it, when called from Installer
- Registry Jobs: Fixed Folder Options got damaged when reading
- Installer: improved adding/removing Start Menu and Desktop items


GoodSync 10.9.4.4

- Gs2Go Installer: Fixed Language settings was reset to English on every install
- Gs2Go Installer: Do not stop or start GsServer and other services in Gs2Go installer
- Gs2Go: Use lang.opt file in Profile folder to store Language setting, not registry
- Installer: Keep installer window Topmost, so that it does not get lost
- Gs2Go: Implement separate AutoUpdate for Gs2Go, which downloads its own distribution
- Gs2Go: Implement AutoInstall + AutoUpdate for Gs2Go, run non-elevated


GoodSync 10.9.3.3
- Installer: New Installer for ver 10 that does not use NSIS
- Installer: GoodSync2Go: Do not allow installing to System Disk (C:)
- Installer: CC Runner: Request Company Id, PIN, etc in non-silent mode
- Installer: transaction-based file update that does not delete old program files
- Installer: Ver 9: freeze ver 9, stop producing releases, except for major fixes
- Installer: Localization: do our own localization, based on -.rfs files
- Installer: Logs: When in System Account (MSI), write logs to C:/Program Data/GoodSync
- Mega FS: Added Mega file system (Beta), with mega:// prefix
- Export TIX: Fixed copy of Accounts was not saved to TIX file on Export
- GSTP: Added enforcement of Email and Name length limits, when creating account
- sib-lib: Turn On /O2 optimization in all libraries
- gs-server: Do not require file:// prefix in Home Folders URL
- gs-server: Allow Home Folders and Folder Grants to be combined
- gs-server: Add New User: Remove GsConnect/LocalUser options, it is defined by server type
- Quota File Sys: fixed several issues in disk space usage computation
- Quotas: Implemented disk quota for granted folders
- Forwarder + Receiver: Fixed virt-comp was not passed if Session is initiated via PickupSessions
- Mediator Web UI: Added page to Request Storage
- Mediator Web UI: Break User Account presentation into several tabs


GoodSync 10.9.2.2
- gs-server: Fixed Incremental Analyze did not work for gs-server + On File Change
- gs-server: Fixed wrong paths passed in GetFileCheckSum
- GSTP + OTP: Fixed of Device Authorization was lost, then client can cycle on re-Auth
- GS Connect Web UI: Added Delete Old Devices, that is, devices not seen for N days
- GS Connect Web UI: multiple bug fixes, improve usability
- GSTP sharing: Fixed Sharing did not work, if default forwarder was used
- GSTP sharing: Implemented CanShare flag: Grantor user allows Share to be further shared
- GSTP sharing: Relax format of From Folder, do not require file:// prefix
- Amazon Cloud Drive: Fixed Conflict 409 in Analyze after stopped Sync


GoodSync 10.9.1.5
- Disk Free Space: show it in Explorer and Browse dialog for all file systems that have it
- Sharing: Added chaining of Folder Grants: (A grants to B) + (B grants to C) -> (A grants to C)
- Sharing: Granted Computer now assumes UserId of Grantee user, not that of Grantor user, as before
- gs-server and forwarders: Fixed passing of Delegated Auth flag
- gs-server: Added flag DirectOnly to settings.tix. If Yes, it declares that it needs no Forwarders
- gs-server: Added flag GrantsOnly to settings.tix. If Yes, server rejects all non-grant folders
- gs-server: Fixed /set-admin, /set-user and /del-user commands: load settings before them
- MS Graph OneDrive/Office: Fixed OAuth2 token endpoints for regional clouds
- Fixed vulnerability where GoodSync can load malicous DLL from its program folder
- Moved European Forwarder to bigger server in Amsterdam
- Added GDPR clause to Privacy Policy, added GDPR page to web site
- Linux .run installer: Fixed profile owner when configuring gs-server daemon to run under limited user
- Gs-Server for Synology NAS: Better integration with DSM UI, according to DSM standards


GoodSync 10.9.0.5
- Gs-Server: get rid of internal file:// in URL pointing to gs-server, so that
- gstp://comp.user.goodsync/file:///disk/folder becomes gstp://comp.user.goodsync/disk/folder
- Browse Dlg: Fixed checking for GSTP computer being local, when GS offers to change to Local FS
- Browse Dlg + Side Options: Fixed Side Options do not change when sync folder changes in Browse dlg
- Side Options: Allow turning Off Use Temp Files option for Local FS, as in rare cases it may not have MoveFile
- Do not Delete Dest file on Direct Upload only when both RecycleBin and History are turned off
- Sync Scripts: Do not Call Script / Send Email after Analyze that ended with Wait for User
- Windows FS + SMB: Fixed resolution of SMB paths that are used in Local FS
- Amazon CD: Retry on Error 502 Bad Gateway, returned by ACD server
- Encrypted FS: Implemeted GetFileOwner(), GetFileOwnerACL(), SetFileOwnerACL()
- TLS/SSL: updated list of valid root certificates and Certificate Authorities
- Gs-Server Web UI: Fixed logout did not cause forgetting credentials in the browser
- DE and AR localization updated


GoodSync 10.8.9.9

- Encryption Side Option: Merge Encrypt Names/Bodies into one option
- Encryption Side Option: Added Test Encryption button, to test Encryption Password on folder
- Encryption Side Option: Added Empty Sync Folder button, to wipeout folder when Encryption changes
- Encrypted File System: Added conveyerization to it, so that it can upload much faster
- Side Option FAT-like: Show it for GSTP file systems too, as FAT may be hiding behind GSTP
- GSTP server + Home FS: Make Folders grow directly from GSTP server, without qhome:// FS and Server S0
- Sharing + Forwarder: Make Sharing work via Forwarders
- Sharing: Fixed folder list when Grantor's server is presented as two different servers to Grantee
- Azure FS: Not Found in ConnectFS is now ignored, not a real error
- Installer: Add Marker to all dialogs and message boxes, so that they can be closed by Installer
- File Upload: If destination file system is atomic, do not delete destination file before upload
- Side Options: Use Temp Files: Make this option always On for Local File System
- MS Graph: Added ability to address sites and sub-sites by name
- Browse Dialog: Reorder file systems, hide old and unused file systems


GoodSync 10.8.8.8

- SFTP: Major Speedup of Uploads, up to 20 times faster on fast networks
- SFTP: Added support for ECDSA host key algorithms, such as SSH-ED25519
- Sharing: Fixed drilling into shares where server name seen by Grantee differs from Grantpr's name
- File Open: Fixed files were not open in GS Explorer from Sync tree
- Sockets: speed up socket upload and download on high speed networks
- MS Graph: Added option "Request Group.All.Read scope", off by default
- MS Graph: Added Region option for National Clouds: US govt, DE, CN
- MS Graph: miscellaneous bug fixes and speed improvements
- S3 DreamHost: Allow parts upload on DreamHost, they finally implemented it
- Get/Set ACL GSTP: Send ACL in the HTTP body which can handle newlines in ACL
- Gsync, gscp, gs-server: get rid of extra newline in console output
- Gs-server: Allow only TLS 1.2, enable ECDH and show three strong cipher suites by default


GoodSync 10.8.7.7

- SFTP: Major Speedup of Uploads, up to 20 times faster on fast networks
- Sockets: speed up socket upload and download on high speed networks
- MS Graph: Added option "Request Group.All.Read scope", off by default
- MS Graph: Added Region option for National Clouds: US govt, DE, CN
- MS Graph: miscellaneous bug fixes and speed improvements
- S3 DreamHost: Allow parts upload on DreamHost, they finally implemented it
- Get/Set ACL GSTP: Send ACL in the HTTP body which can handle newlines in ACL
- Gsync, gscp, gs-server: get rid of extra newline in console output
- Gs-server: Allow only TLS 1.2, enable ECDH and show three strong cipher suites by default


GoodSync 10.8.6.6

- MS Graph: many changes in browsing, show all Sites and Drives
- MS Graph: Acquire Group.Read.All and Sites.ReadWrite.All permissions, to see Sites
- MS Graph: Add icon and description, fixed several bugs
- S3: V4 auth: Escape : and * too, or we get signature errors
- GoodSync2Go: Fixed GoodSync2Go.bat file did not start EXE on 32-bit system
- File Monitoring: Do Monitoring only for Local/Net file systems, not for remote systems
- Device ID: fixed corrupted device id sent for non-latin computer names
- Thousands Separator: Fixed adding , or . separator in case of non-standard Number Format
- Crash Catcher: Do not report exception that we caught, if we could not walk the stack
- Gsync and other console apps: Make them show foreign characters
- Filters: fixed bugs in handling Absolute Include filters
- CC Runner: Do not log sensitive info, such as passwords
- Gsync: Fixed /oauth option not working
- Gscp: Add handling of /profile= and logging command line options


GoodSync 10.8.5.5
- MS Graph: many changes in browsing, show all Sites and Drives
- MS Graph: Acquire Group.Read.All and Sites.ReadWrite.All permissions, to see Sites
- MS Graph: Add icon and description, fixed several bugs
- S3: V4 auth: Escape : and - too, or we get signature errors
- GoodSync2Go: Fixed GoodSync2Go.bat file did not start EXE on 32-bit system
- File Monitoring: Do Monitoring only for Local/LocalNet file systems, not for remote non-monitor systems
- Device ID: fixed corrupted device id sent for non-latin computer names
- Thousands Separator: Fixed adding , or . separator in case of non-standard Number Format
- Crash Catcher: Do not report exception that we caught, if we could not walk the stack
- gsync and other console apps: Make them show foreign characters
- Filters: fixed bugs in handling Absolute Include filters
- CC Runner: Do not log sensitive info, such as passwords
- gscp: Add handling of /profile= and logging command line options


GoodSync 10.8.4.4
- MS Graph: Added new file system for Microsoft Drive, based on new MS Graph API
- MS Graph: This is Experimental Beta release, less subject to Error 429 though
- Fixed: Cannot connect to local GoodSync server: server: Cannot get user: User -(undefined)-
- Do not allow Limited User to use Elevation to get to folders that are forbidden to him
- Account Manager: Do Not remove Accounts that have no File System for their URL
- S3: Fixed getting location of bucket for URL-based scheme, could cause infinite recursion


GoodSync 10.8.3.7
- Backblaze B2: fixed progress indication in upload of large files
- Amazon S3: Now always use V4 auth (AWS4-HMAC-SHA256) headers
- S3: Us Govt Cloud: Always use region us-gov-west-1 for it
- Deduplication + GSTP: Fixed download of dedup file from GSTP was showing it of zero size
- GoodSync2Go: Added 64-bit EXEs to files installed by GS2GO installer
- GoodSync2Go: Store DeviceID in Profile/deviceid.tix on GS2Go disk
- GoodSync2Go: improve folder structure, have only file GoodSync2Go.bat at the top that runs 32-bit or 64-bit
- gs-server: Fixed Unique Server Id was not set sometimes, when gs-server started
- gs-server: Improve startup and restart sequence
- gsync: Get /profile= option before other options, so that commands are applied to the specified profile
- LogViewer: improve init sequence, write logs of LogViewer to log folder
- Visual Sync Tree: Add File To Sync tree view that shows unsynced files, update it during Sync
- Visual Sync Tree: Changes View shows Proposed Changes, that do not change as Sync progresses
- Visual Sync Tree + AutoSync: Do not drop the tree after AutoSync finishes


GoodSync 10.8.2.2
- Auto-Install on Auto-Update: new scheme with Waiter process, provides instant restart
- Auto-Install on Auto-Update: install it any time Jobs are not running, not just 3AM to 5AM
- Auto-Install on Auto-Update: non-installer URLs now will all go to browser
- De-Elevation after Installer: do not use Windows Tasks for it, use our own restart
- Special Operations: fixed rare crashes caused by Spec Ops + Direction Change
- Crash Catcher: do not catch exceptions not related to GoodSync
- Sockets: fixed shutdown sequence for Listen sockets, fixes rare crashes
- Accounts and Jobs Load: Fixed Import of Job that point to incorrect Account
- Control Center Runner Installer: more fixes
- Control Center Job Upload: Fixed Job Command line generator for several job options
- SFTP: Added support for ECDH key exchange algorithms: ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, diffie-hellman-group14-sha256, diffie-hellman-group16-sha512, diffie-hellman-group18-sha512


GoodSync 10.8.1.1
- SyncLib: optimize performance bottlenecks, so that it runs faster
- ZipStream read/write: optimize performance bottlenecks, so that it runs faster
- Crash Catcher: do not react to crashes that happen not on GoodSync stack
- GSTP client: fixed crashes, if many clients Connect all at once
- Sib-Socket Shutdown: fixed force shutdown did not cause effect on Linux
- License: Added lock to reading and writing License file and registry
- CC Runner Service Install: Remove NT Domain from SysUserID before using it
- Account Manager: save copy of accounts-bookmarks.tic file after each migration
- SyncLib: Delete all *._gstmp files if they are more than 24 hours old
- Mediator: Disabled TLSv1, SSLv3, enabled ECDHE for better encryption
- Google Drive: Fixed Make Folder in Browse Quick mode may cause cache problems


GoodSync 10.8.0.8
- Multiple Workers in SyncLib: Fixed crashes, caused by insufficient locking of Job Progress
- On File Change: Fixed rare crashes when *.tmp file was encountered and deleted
- Rewrote Crash Catcher, to catch more real crashes and fewer unrelated crashes
- Optimization: Turned Off /O2 optimization in SyncLib And GsFileSys, as it prevents crash analysis
- Generate SyncOp instead of New File Conflict, if non-intersecting L and R gen lists are far apart time-wise
- On File Change: make Job wait 30 sec between Analyze and Sync, if Errors or Conflicts were detected
- On File Change: make Job wait 30 sec after Sync, if User Stop was detected
- Sync Tree Toolbar: Fixed Item counts were not updated when new tree is built by Analyze
- Upload Jobs: Fixed Command Line errors in uploading jobs


GoodSync 10.7.9.9
- Multiple Workers in SyncLib: Fixed crashes, caused by insufficient locking of Job Progress
- Generate SyncOp instead of New File Conflict, if non-intersecting L and R gen lists are far apart time-wise
- On File Change: make Job wait 30 sec between Analyze and Sync, if Errors or Conflicts were detected
- On File Change: make Job wait 30 sec after Sync, if User Stop was detected
- Sync Tree Toolbar: Fixed Item counts were not updated when new tree is built by Analyze


GoodSync 10.7.9.7
- Google Drive: Introduce Quick Mode, used in Browse, so that Cache is initialized only in Analyze
- Google Drive: Keep backup of disk cache file, use backup file in case primary file is damaged
- Google Drive: do not send redirect_uri when refreshing Access Token, or else we get Error 400
- Box.com: Rewrite listings to use marker pagination instead of offset pagination
- Box.com: Skip over web_link items, they are not files or folders anyway
- OAuth2 File Systems: retry connections on OAuth2 token refresh, to fix connection errors
- On File Change: stop file upload when it has been change on source side
- Progress: Reset Job Bytes and other progress items when Incremental Sync starts
- SyncLib: Fixed file deletion was possible in GSTP jobs, when connection was lost during Analyze
- gs-server: Make Mediator reg attempts more aggressive when Discovery starts
- Proxy in Sockets: Fixed If Proxy Auto/Manual is Off, sometimes it was used if Proxy Host/Port were set
- Gs-Server and Gs-Runner services were not reacting to Sleep, now they suspend when going to Sleep
- Added command: Tools -> Upload Jobs to Control Center
- Program Options -> Security: Added option: Accounts Encryption Password
- CC Runner Installer: Added CL option for Accounts Encryption Password
- CC Runner Installer: Added CL options for Mini Progress and Allow User To Exit
- CC Runner: Added reaction to: Sleep, Wakeup, Logoff (End Session), WMI messages


GoodSync 10.7.8.8
- MS drive: Use new MS Graph for Discovery Service, as old OneDrive system stopped working with Error 401
- MS drive: improve error messages when discovery fails, instead of showing dropped connection
- gsync CL options: Move /override-locks from Run Options into Job Options (non-persistent)
- CC Runner: When installing CC Runner, set it to Start When Windows Starts, not GS GUI
- Google Drive/Docs V3: Implement "delete" for files/folders that were shared with current user


GoodSync 10.7.7.5
- Google Docs: Added Google Docs file system with gdocs3:// prefix. It shows only Google Docs, not Files
- Google Team Drive: Fixed changes.list parsing in case when Team Drive object itself is modified
- Azure Files: Set root folder flags properly, so that top level folder cannot be used for sync
- Browse Dialog: Allow Deleting Folder Bookmarks inside Accounts, not just whole Accounts
- Browse Dialog: When Account has been deleted, set Current URL to previously seen account
- CC Runner: When installing GoodSync by User then always reset EnterpriseRunnerConfig flag
- Uninstaller: Fixes icon was not shown, could crash on Windows XP
- SyncLib: Glue several Notes (Comments) together, separated by '; '
- Sync Tree Direction User Change: Speed up processing, when many items are selected
- Menus: Move New Job command from All menu to Job menu
- Gs-Server on Windows XP: Fixed error: User Impersonation failed: acquire privileges
- On File Change + Exclude Empty Folders: Fixed adding new file to empty folder does not get synced
- Import: Re-Added Import of Old Format .TIX files
- Licenses: Rename Pro License to Personal, clarified license language in the program and web site
- Licenses: Updated License Agreement to reflect changed terminology
- Gs-Server license: Do not check User and Session count when client from 127.0.0.1 comes in
- gsync command line: more fixes to command line parser
- Explorer Progress: fixed upload/download progress for many small files


GoodSync 10.7.6.7
- Change log not available for this version


GoodSync 10.7.6.6
- GoodSync Licenses: renamed 'Enteprise Server' to 'For Server OS'
- GoodSync Licenses: renamed 'Pro (Fixed)' to 'Personal'
- Browse Dialog, Multi-Select: Fixed opening unchecked folder could cause checking it and parents
- WinFileSys + SMB: process deduplicated links, for which DeviceIoControl returns error 4390
- Dropbox: Implemented download in blocks, this improves download of large files
- Runners: Make their instance mutex names unique per profile, not per authed Windows User
- gs-server: Fixed logs stopped writing after server-initiated restart
- Fixed AuthCode Activation did not work
- gsync command line: Fixed job-delete was not working
- GoodSync.exe command line: Allow window size options to be combined with job commands
- Command Line: Fixed Connectoid Options were not always making it into Jobs
- Command Line: ReAdded optins /exit and /exit-ifok, to be used in GoodSync GUI only
- Fixed GoodSync MSI Installer shows warning on Windows Server


GoodSync 10.7.5.5
- Runner Service Setup: When setting up Runner Service, use full DomainUserName, not just UserName
- Goodsync2Go: Fixed installer of GS2Go, it was not working in 10.7.3-4 due to command line parsing issues
- CC Runner Installer: Add new mode /cc-runner=update which updates CC Runner to the mode from last time
- Fixed GoodSync GUI does not show state of GS Runner Service jobs
- Ver 9: fixed installer, it also uses new gs-runner now
- gs-server Unique Clients limitation: Increase it to Allowed 4 clients, show Client IP addresses


GoodSync 10.7.4.4
- Fixed GoodSync installer did not create proper Registry value to Run GoodSync When Windows Starts
- CC Runner: fixed bug in upgrading, which could result in Runner being declared a new Runner
- CC Runner: fixed upgrading using regular GoodSync-v10-Setup.exe installer was resetting CC Runner flag
- GoodSync Connect Setup: Now always delete Old Users, so that only new New user is left
- Gs-Server Web UI: Added warning about too many gs-server users, per license
- Browse Dialog: Multi-Select: Fixed if only one Folder is Excluded, it becomes the new Sync Folder
- Command Line: Fixed /analyze and /sync options of 'job' command were ignored if they come first


GoodSync 10.7.3.3
- Job Options -> General: Added option to Shutdown Computer after Job is finished
- Job Options -> General: Added option to limit Max Time To Run (minutes)
- Program Options: When Retain Days changes, start complete cleanup with the new value
- Job and Program Options: trim string values such as UserId or Smtp Host
- SyncLib: Added File Size to Copy New/Over log message, when syncing
- Installer: Fixed GoodSync GUI can be randomly started by Scheduler, esp if Avast is installed
- Installer: speed up installation of GoodSync, fixed some issues
- Browse Dlg: Multi-Select: If Include List is empty, still show Implied Checked checkbox
- Gs-server: Added Limitation on Number of Users and Number of Unique Clients, based on License
- File Server License for GSTP gs-server: added new License for gs-server-based File Server
- Scripts and Email: Added variables: %TSTART% %TFINISH% %TELAPSED%
- Command Line: improved command line parse, to catch more errors in CL options
- Sib-socket + SSL: Turned off TLS session cache on client side, only FTPS uses it now
- Command Line: Discontinue parsing Jobs and Program Options in GS GUI, we have gsync for that
- Added/Fixed policies: DisableAzureFile, DisableGDrive2, DisableGTeamDrive, DisableSharepoint
- Gsync: Added 'auth' command that creates new accounts (OAuth, browser auth) from command line
- CC Runner: Added new Control Center GUI Runner, with Taskbar icon, that shows status of jobs run by CC
- CC Runner Installer may install CC Runner as a Taskbar GUI or as a Windows Service
- CC Runner can automatically update itself to latest version, if CC specifies AutoInstall option


GoodSync 10.7.2.2
- Added new Google Team Drive file system to GoodSync and GoodSync Explorer
- Automatically start GoodSync GUI, if silent install is On and GS GUI was running before silent install
- Installer: Make de-elevation to happen by starting GoodSync via Windows Task Scheduler
- Installer: When installer start GoodSync GUI, make sure it goes on top of Z-order
- Filters in Program Options: Show Global Filters: Exclude System / Hidden / Empty
- Fix adding of Filter flags for Empty folders, when uniting Global and Job Filter
- Fixed Delete Recycled and History Files was not deleting History DB
- Jobs in Registry: Fixed crash in ver 9 when loading Jobs from Registry
- Remove GoodSync-v9.exe from GoodSync v10 distribution, use ver 9 distro instead
- Parallel Thread limits: increase to 64 for SFTP, FTP, GSTP
- FTP: Added option 'Require TLS session reuse on data connection', On by default
- FTP: Turn off this option to resolve connectivity problem with broken servers
- More localizations for Group Names, etc.


GoodSync 10.7.1.1
- Amazon CD: Fixed GetMetadataEndPoint Unauthorized Error 401
- OneDrive: Add retry on 503 Service Unavailable
- Progress: fixed progress reporting in simple uploads such as to GSTP
- Parallel Threads: S3 and Azure: Increase max parallel threads from 20 to 64
- Control Center Runner: Fixed few finishing lines of Job Run were not submitted
- Control Center Runner: Summarize/Compress update-job-run requests, to reduce server load
- Gsync /runner and /enter-runner: Allow only one instance of each per User
- Program Options + Command Line: Add processing of Global Filters and some newer options
- Browse Dialog + Filters + Multi-Select: multiple fixes, improve usability
- Update DE localization


GoodSync 10.7.0.0
- GSTP Sharing: Enable Sharing of Folder on Mediator: now Folders can be shared with other GoodSync users
- GSTP Sharing: For now Sharing of Folder is done only in GoodSync Connect account Web GUI
- GSTP Mediator: Remove Talkback processing, as it is 2 years old, so only really GS versions use it
- Passwords: Add option Save Connect Passwords Locally Encrypted, it makes them non-portable, more secure
- Program Options: Added Security tab, for the option above and CC admin credentials
- Account Manager + OAuth2: new scheme of storing tokens and getting auth via Browser
- OAuth2: maintain Refresh and Access Token in a separate cache, not to change Accounts
- Office365/SharePoint: increase initial backoff timeout to 15 sec, on error 429
- TeamSites/SiteRoot/SharePoint: Forbid # % characters in paths as it causes error 400 on uploads
- Browse Dlg + Multi-Select + Links: fix handling of Links in Drilled and CopyAsIs job modes
- Import: Fixed Import of a single job could destroy unnamed bookmarks, thus damaging other jobs
- Reading Accounts and Jobs: Fixed recovery of broken Jobs file (with no Accounts file) causing problems
- Explorer: do not allow any file/folder actions while folder is being listed
- CheckSums: store CheckSum type, as relying on CheckSum size for typing does not always work
- Updated Polish localization


GoodSync 10.6.8.8
- History Cleanup: Use History DB to speed up cleanup of _history_ files
- Recycled and History and Log Cleanup: now do it after every sync, as it runs faster
- Recycled and History Options: change their names and description, to better explain what they do
- Recycled and History + Direct Destination (No Temp): Use MoveFile, not CopyFile, to run faster
- Filters: Do not apply Size and Time filters to Folders
- Filters: speed up and simplify Filters processing
- CheckSums: Fixed sometimes CheckSums of different types were compared
- CheckSums: Do not use CheckSums of wrong type from the state file
- CheckSums: Fixed uploading of Office file changed by server could result in conflict
- Analyze: Fixed ListDir could be called on Files as if they were Folders, resulting in slowdown
- Links + Exclude: Fixed Ignore Links was not always excluding Links nodes
- Links + Browse: Drill Down to Folder Links in Browse Dlg + MultiSelect, if SymLinks option is Drill Down
- gsync command line: Fixed command line options description and manual, to latest changes
- OneDrive/Office365: Backoff on 429 Too Many Requests and Conflict 409 error with EditConflict
- SharePoint 2013: Fixed ListDir return error when path points to a file or not found
- SharePoint 2013: Backoff on 429 Too Many Requests and Conflict 409 error with 'Save Conflict'
- MTP: Fixed change file name case did not work properly


GoodSync 10.6.7.7
- Licensing Fixes: Auto Options are not available in Free version
- Licensing Changes: Increase max files to 1000 in Free version
- GSTP Client: When doing Disconnect, set SendRecvTimeout to 5 sec
- GSTP Client: When talking to local elevated client, do not wait on reconnect
- GSTP Client: check that server-id received from Server is not empty
- GSTP Receiver: Do Not close socket on Receiver side after we send Disconnect verb
- GSTP Receiver: Send info headers such as server-id
- Azure (Blob) file system: Fixed large file uploads, more than 4 Gb
- Filters: Fixed filter '/folder/' with tail '/' was not excluding folder
- Separate Installer for GoodSync for Windows Server
- Fixed Jobs File reading and import, so that Import does not repeat
- Accounts File: improve locking of read/write of Accounts file
- Ver 9: Move ver 9 version number to 9.16.7, to make it be in sync with ver 10


GoodSync 10.6.6.8
- Browse Dlg + One Driver: Fixed freezes and error when drilling down to top folder after OAuth
- GSTP Forwarder Receiver: Do not report to Mediator errors caused by Forwarder Pipe disconnecting
- GSTP Client: when client lost connection to Server do not do long reconnects, report to Mediator
- Filters: allow [a-z] or [0-9] and other such character ranges in Filters, [ and ] mean [ and ]
- Filters: when adding Filters from GUI, turn [ into [ and ] into ]
- Filters: fixed several more exotic issues in exclusion and inclusion
- On File Change: Add 1-min wait between Analyze and Sync, when Analyze produces Errors or Conflicts
- Runner: Do not save changes by produced by Job Options checker
- On File Change, Incremental Analyze: fixed error when file inside folder is reported before this folder
- Fixed Free Space was not updated on Sync Tree file/folder Direction Change
- Backblaze B2: Fix rare concurrency crash on folder delete
- Licensing: Do not allow Auto jobs (Attended) to run in Free mode
- Gs-Client/Gs-Server on Linux: Added support for Unix extended attributes.


GoodSync 10.6.6.6
- Change log not available for this version


GoodSync 10.6.5.5
- Control Center Runner: Fixed job start and stop sequence, to improve reporting
- Control Center: Fixed log lines sometimes glue together
- Google Drive: make it work when changing existing empty UserId to new UserId from OAuth
- Google Drive V2 and V3: change captions and help
- FTP etc: When reading line, allow CR to be followed by non-CR/LF character
- Windows FS: Use Backup Semantics for all CreateFile system calls, fixes Access Denied
- Windows FS: Fixed MoveFile was giving up on Access Denied, now tries Copy + Delete
- Browse Dlg: Fix Deleting Account used by Job is allowed, if bookmark inside Account is selected
- gs-server: GetFileAcl: Fix error in returning GetFileAcl results
- MTP: make progress processing work correctly
- MTP: Fixed name-case renames of file and folders were not working in Explorer
- ListServers: fixed copying credentials, fixes No Account error in Analyze after Browse
- gs-server: /set-admin and /set-user options also set options in settings.tix
- gsync command line: Left and Right folder of a Job: allow combining AM and Connectoid options


GoodSync 10.6.4.7
- Change log not available for this version


GoodSync 10.6.4.4
- MTP: re-add missing thread wrapper, it was causing CoInitialize not called (error 0x800401F0)
- MTP: make progress processing work correctly
- Move/Rename: make it work for case-insensitive file systems, where only case of name is changed
- On File Change: fix bugs and slowness, when change of one file/folder is received many times
- On File Change + Incremental Analyze: fix bugs in folder processing
- On File Change + Incremental Analyze + Filters: apply all filters, so that filtered items are ignored
- On File Change + Progress: show progress of Incremental Analyze too
- Runner + Gs-server Options: gs-server now applies Program Option on a command from Runner
- Runner: If user with old jobs.tic never runs GS GUI, still convert jobs.tic to new format
- S3 + Wasabi: Wasabi can do Upload in Parts, so allow multi-part upload
- User Stopping Jobs: Fixed urgent job stop (two or more Stop clicks) was not always processed
- On Schedule: fixed normalization of Schedules, it could fix DayOfWeek to 0 when not needed
- Browse Dialog: fixed non-translated GSTP email can make it into Account Manager
- Locks: Consider lock files that are older than 2 days abandoned and delete them as such
- Move creation of _gsdata_ folders from Start of Sync to Start of Analyze
- Explorer: When renaming file or folder, check that destination name does not already exist
- gs-server: fix command line processing and diagnostics
- NAS: Added support for Synology DS418j (Realtek 1296 platform


GoodSync 10.6.3.3
- OpenSSL: Add no-asm option to x64 builds, that fixes crashes on some processors
- Crash Catcher: add more catchers for crashes, to improve diagnostics of crashes
- Better random number generator, with proper initialization of OpenSSL
- Mediator: Fixed OTP was not sent by email, on initial OTP generation
- Mediator Web Site: Add Password Change form, fix OTP usability issues and bugs
- Web UI: Allow entering One Time Passwords (OTP) from Web UI, for multiple users
- Web UI: Do not create New GoodSync Connect user in Web UI, use Mediator Web Site
- Web UI: better display of Mediator registration status for the User
- GoodSync Connect Setup: always show No-Mediator option, fix bugs and crashes
- GSTP: Fix progress not reported in GsUploadFileBlock, in the tail part
- CC Runner: Fixed Big Log chunks not accepted by CC, so submit large logs in smaller 16 Mb chunks


GoodSync 10.6.2.9
- Change log not available for this version


GoodSync 10.6.2.4
- Change log not available for this version


GoodSync 10.6.2.2
- Runner: Fix worker thread closing sequence, it could cause rare crashes
- On Schedule: When Hour=NN is specified and Minute=0 is not specified, add Minute=0 automatically
- On File Change + Stop: When User stops an OFC job, do not stop File Monitoring
- Auto Jobs + Stop: Stop of one AutoRun job now does not reset Waiting To Run Status for all jobs
- gs-server settings: save changed file upon generation of Device ID, even if original file was not present
- OneDrive of MS: Fix SiteRoot uploads of files with ' in filename was not working
- Gs-Server: Add One Time Passowrd support in Web UI Setup for NAS


GoodSync 10.6.1.7
- Azure Files: Add Windows Azure Files API file system, was Azure Blobs only
- Fix handling of must-drill-down OneDrive files/folders (appear in Windows 10 Fall 2017 Update)
- Auto Jobs: Fix on a rare oaccasion Job in Auto Mode not start when required by external event
- GSTP forwarders: Add SSL certs to all Official and Default forwarders
- FTP + On Folder Connect: Fix OFC was not detecting Connect/Disconnect
- Exploer: fix navigation when clicking bookmark in bookmark list for file system
- Explorer: Disable all Commands when tree node is being expanded


GoodSync 10.6.0.0
- GSTP: Implemented One Time Passwords (OTP) and Client DeviceId
- GSTP: You can turn on OTP in https://www.goodsync.com/gs-connect/user-account
- GSTP: Prefer Emails as UserIds, they are also used in One Time Password auth
- When OTP is On, you will receive Email with OTP every time you use a new Device
- GoodSync client will request One Time Password sent in Email
- GSTP: OTP is requested when doing GoodSync Connect Setup and Browse dialog
- GSTP: Each client/server now sends DeviceId, ComputerId, and Device Description
- GSTP: Both email and old-style GS Connect UserId may be used to authenticate
- GSTP: New Account Form: Add ReCaptcha to filter out robots
- Official Forwarders: use Forwarder IP name, not IP address, to please security
- Official Forwarders: use port 443, not 80 for SSL comms, to please security
- Receiver: Fix incorrect reporting of connections to Official forwarders
- OTP + gs-server: allow OTP in /set-admin=user_id:password[/otp-value]:sys_user:[sys_pass]
- OTP + gsync: allow OTP in new command line options /can-otpN=yes, /otpN=string
- Cleanup Logs: Avoid recursive cycling via symlinks, by limiting number of folder levels to 50
- GSTP progress: show progress when is being added to at the tail
- Enterprise Policies: fix non-enforcement of NoAutoUpdate policy
- Runner Setup: If Runner Service user and this Windows user differ, issue warning
- Runner: Change gs-server settings on a cue from CC only if Runner is elevated
- Azure: fix space and # encoding issues that could cause Not Found for files and folders
- Google Drive: Fix Not Found error, that usually occurs on lock.gsl


GoodSync 10.5.8.5
- ACD: do reconnects, to fix 'Cannot Switch to SSL' error cause by ACD serves malfunction
- Fix file operations progress reporting jumpiness, make it more smooth
- CC Runner: Fix GsRunnerSubmitter thread was not shutting down properly
- Explorer: Fix Rename does not update display name
- SyncLib: Get destination file attribute after sync, needed if Compare Attr is used
- Jobs from Registry: fix load and save of such jobs


GoodSync 10.5.7.7
- ACD: do reconnects, to fix 'Cannot Swtich to SSL' error cause by ACD serves malfunction
- Fix file operations progress reporting jumpiness
- Explorer: Fix Rename does not update display name
- SynLib: Get destination file attribute after sync, needed if Compare Attr is used


GoodSync 10.5.6.6
- OneDrive: Fixed 'Unsupported security token' error
- Explorer: Fixed when clicking folder with ftps:// URL, it becomes ftp:// URL
- Azure: Fixed sometimes assigning check-sums to a wrong file, due to parsing error
- Browse Dlg: If two or more

更新時間：2019-04-03
更新細節：

What's new in this version:

- Point mac users to the launched desktop app

更新時間：2019-04-01
更新細節：

What's new in this version:

App Builder 2019.28
- Add the Context Menu event for the Html Content, Report, Container, Input Text, Input Number, Input Password, Input Email, Input Phone, Input Date, Input Search, Input Color, Textarea and Image controls


App Builder 2019.27
- The DecSoft App Builder compiler has been enhanced when check for possible modifications in app's files like splashs, icons, javascript, styles, images and other files. To decide if the files has been changed or not (and therefore if need to be copied / refreshed in the app compiled directory) the compiler use now the file write date time, in addition to just the file sizes, which sometimes cause some "false negatives"


App Builder 2019.26
- Enhance the AdMob Javascript plugin and the AdMob app sample in order to implement various actions missing in the first version of the AdMob Javascript plugin of App Builder. Now it's possible to create banners before show it, prepare interstitials to be show later, and, also prepare and show reward videos


App Builder 2019.25
- Fix a bug when copy a Container control from one app's view to another app's view: before this fix the pasted control do not respect the name of the original one


App Builder 2019.24
- Change log not available for this version


App Builder 2019.23
- Change log not available for this version


App Builder 2019.21
- Added the Signature2 app sample (number 181 in App Builder). This app sample is simlar to the Signature one, except that we use the Cordova's Files plugin in order to save the user's signature in a JPG image, inside an Android device, for example, and, without using any server side
- Added the new Signature app sample (number 180 in App Builder). This app sample show how we can use the Signature PAD Javascript library in order to get a signature from the app's user, and, finally download the signature (only in browsers) or get their Base64


App Builder 2019.20
- The type of the [App.Online] variable is not string, not boolean. Even when we can deal with this variable using actions like "VarIsTrue", certainly, follow the convention the referred variable is not of the string type, which can be useful, for example, for the "If" action (condition), that we can use without the usage of "VarIsTrue" nor other action


App Builder 2019.19
- Fix an introduced error in the previous release in the MediaSetVolume action. The error occur only if we use a MediaPlayer control in their Audio flavour and with their AutoPlay variable set to false (which is the default value)


App Builder 2019.17
- aImprove the App Builder compiler cache trying to be more accurate when we need to remove some piece of code from the cache, in other words, try to remove the compiled cache when we modify any app or view or control property, etc.


App Builder 2019.16
- Add the new Dropdown3 sample (number 179 of App Builder). This sample shown how we can use the new Direction variable / option added to the Dropdown control, and also how we can combine it with the already existing Alignment variable / option of the control
- Remove the "Caret" variable from the Dropdown control. This variable has been removed due to the new variable added to this control: Direction, which allows to indicate the direction of the dropdown menu from these possible values: dropdown (by default), dropup, dropleft and dropright


App Builder 2019.15
- Change the Apache Cordova plugin used by the SendSMS Javascript plugin of DecSoft App Builder. The old used plugin don't work anymore as expected. This new one not only works well, but also ask for the appropriate permissions to the user in order to properly work
- Minor internal changes in the Report control, only in their "table" mode. Now the container of the Report's table has the appropriate Boostrap CSS class to made the Report's table responsive


App Builder 2019.14
- Update Font Awesome to the latest version. This release of App Builder also update the Icon Picker dialog, which now include up to 1500 icons ready to use
- Update the CSS and Javascript of the Boostrap framework to the latest stable version. Update also the app's themes provided by bootswatch.com
- Update the AngularJS Javascript library core and the used Aria, Route, Touch and Sanitize modules to the latest stable version from 1.7.6 to 1.7.7
- The App Builder installer uses now the latest version of Inno Setup. Among other changes, this present now a much modern install assistant pages


App Builder 2019.13
- Add the new StartEvent app sample (number 178 in App Builder). This app sample shown how to use the recently added app's Start event, and, specifically, how to use it to change the recently added app's configuration variable "window.App.Config.DefaultView"
- Added the new "window.App.Config.DefaultView" variable. This is a new kind of variables internally used by App Builder, and that can be set from the recently added apps' Start event. This specific configuration variable determine the app's default view, in other words, what view of the app is shown to the user when the app is loaded, and also the view that is shown to the user if the app's URL specify a non existing view
- Add the new app's Start event to our apps. This event is the very first fired in our apps and can be used to perform some actions before any of the app's stuff has been initialized. This event only allows pure Javascript code, not App Builder's actions, and, can't access to stuff like app's views, controls, global variables, etc. However, the app's Start event can do useful things, for example, change some App Builder's configuration variables


App Builder 2019.12
- Change log not available for this version


App Builder 2019.11

- We are very, very proud with this particular App Builder release. This release has an enhanced compiler, which can compile our apps up to 85% faster than before! This is especially useful when work in apps with a large number of views, that is, apps with 150 views or more, which is not very common, but perfectly possible
- The referred enhancement in the App Builder compiler not only allows to compile our apps up to 85% faster, but the compilation time scale now in a better way too, in other words, no matter if our apps have 10, 100 or 200 views : the compilation time become the same, since App Builder compile now only the modified views
- The above enhancements in the App Builder compiler provide a better work flow now. In a real app that we are developing, with 162 views (and growing), before this release they take 19 seconds in order to compile. This may appear not too many time, however, is it, when we need to compile and run the app over and over again, in order to test the changes, etc. This release of App Builder compile the same app (162 views) in less than 4 seconds
- Add a new checkbox into the program's options dialog / compiler, in order to allows to choose to hide the new app's compiler cache directory or not. By default the compiler cache directory appear hidden, in the same folder than the app's compiled directory and the app's backup directory.
Smaller apps has been also affected with the referred compiler enhancement, that is, more or less commo apps, with 10, 20 app views, also compile up to 85% faster than never, however, since these apps take before around 3 seconds to compile... now we can see this apps compiling in 1 seconds or less
- Prevent an "Access violation" error which can be appear (multiple times) in certain circumstances when some specific messages has been added into the Debugger console


App Builder 2019.10
- Add the new WebCamStop action (number 261 in DecSoft App Builder) to allows to stop a previously started reproduction of the specified WebCam control


App Builder 2019.9
- Add the new Biometric app sample (number 177 of App Builder), which show how we can use the recently added Biometric Javascript plugin for DecSoft's App Builder. Some other fixes has been made too in the other available plugins' help files
- Add the new Biometric Javascript plugin for DecSoft's App Builder. This plugin allows to use the biometric sensor of Android and iOS devices if available. For Android the plugin can deal with the Fingerprint sensor, and for iOS the plugin support the Touch ID and Face ID biometric sensors


App Builder 2019.8
- Change log not available for this version


App Builder 2019.7
- Change log not available for this version


App Builder 2019.6
- Add all the available Apache Cordova Files plugin directories into the Directory argument of the FileRead, FileWrite and FileAppend actions. Before this change we only can choose a couple of the available directories: now all of them are available, but it's your responsability to take care about what directory you can use (some of them are not available in all the platforms, for example)


App Builder 2019.5
- Change log not available for this version


App Builder 2019.4
- Fix a non expected behaviour if we want to set to "True" the Corrected variable of a Camera control. If you wanted the referred variable to "False", then there is no problem. However, if you plain to set the referred variable to "True", AB don't set the appropriate value in the right way, so, in fact a "False" value is used


App Builder 2019.3
- Enhance the way in which the program take care of the folders specified in the app's files manager, in order to be copied into the compiled app, so become available for the app


App Builder 2019.2
- Change log not available for this version


App Builder 2019.1
- Update the copyright year. This is the first 2019 release of the product, and, it's a major release. Maybe your license become outdated if you purchase the product before 01/01/2018. You can continue using your current license by downloading an outdated release. Login in your DecSoft's area for both: download outdated releases and purchase upgrades licenses. Please, contact us if you have any questions


App Builder 2018.135
- Avoid the Javascript error which is produced if a control do not exists in the app and we try to use the actions Show, Hide, Toggle, Enable and Disable
- Fix a mistake in the updater feed archive which cause that App Builder cannot inform to the user if a new release of the program is available


App Builder 2018.134
- The Focus and the Blur actions check now if the element which we want to give the focus really exists in the document DOM, avoiding an error if that element do not exists


App Builder 2018.133
- Change log not available for this version


App Builder 2018.132
- Add the Report19 app sample (number 176 in DecSoft App Builder). This app sample is similar than the Report app sample, except that the Report19 sample shown how to use Base64 encoded images inside a Report control
- Due to certain wrong definition in the AngularJS "compileProvider" of the app, we can experiment some problems, or just can't use Base64 codified images inside HTML Content or Report controls. This release fix this and now we can use this that stuff without problems


App Builder 2018.131
- Add a new option into App's options -> Cordova -> Splash, which allows to determine if certain fade in and out effect must be applied or not to the app's splash screen
- Add a new option into App's options -> Cordova -> Splash, which allows to determine if the app must show or not the spinner progress while the splash screen is visible
- Add a new option into App's options -> Cordova -> Splash, which allows to determine the color of the progress spinner (at least in the Android and Windows platforms)
- Update the spanish translation of the App Builder ID with the new stuff and also other stuff that remain without translate before this release


App Builder 2018.130
- Enhance the Disable, Enable, Show, Hide and Toggle actions in order to accept composed strings + variables for their Control name argument


App Builder 2018.128
- Allow to select (in order to use it when compile our app with Apache Cordova) the Android API 28 (Android 9.0 Pie) from the app's options at Cordova -> Android -> General tab in the app's options dialog


App Builder 2018.127
- Enhance the Disable, Enable, Show, Hide and Toggle actions in order to accept not only a simple control name string, but also app's variables, even inside user app functions


App Builder 2018.126
- Add the new "AllowEdit" variable to the Camera control. This variable is available at design and runtime and allow simple editing of image before the selection of the taken image


App Builder 2018.125
- Fix a very ugly bug when we try to use certain Unicode characters inside the app, more in particular, inside any control than accept text / HTML like HTML Content, Report, Push buttons, etc. We encourage to our customers to upgrade to this AB release, since the refered bug can cause that our entire project file become empty and therefore we can loss our work in the app! Thanks Paolo for the information about this bug


App Builder 2018.124
- Made some changes in the Calculator app sample GUI, as well in their configuration, in other to include the Cordova status bar plugin, which solves certain issue in the new iPhones X, XR, XS and XS Max
- Change the viewport of the HTML index.html (app main file) to "cover" instead to "contain". This is useful for the new iPhone X, XR, XS and XS Max


App Builder 2018.123
- Update the AngularJS Javascript library core and the use Aria, Route, Touch and Sanitize modules to the latest stable version from 1.7.4 to 1.7.5


App Builder 2018.122
- Add a new "Build and run" command in the Run menu and Run toolbar. This command is exactly like the "Build" one, except that, after build the app, this is launched in the AB internal debugger browser. Sometimes we don't want to add the debug information into the Javascript, but if so we need to build and then run the app. This new command do this last task in one click


App Builder 2018.121
- Fix an unexpected behaviour with the Radio controls. These controls "miss the model" if we goto another app's view. The Checked variable of the Radio controls has been removed, in order to solve this unexpected behaviour
- If your app uses the Checked variable of the Radio controls, please, review your code. You must use the Radios' Group variable in order to check one or another Radio controls. See the Radio app sample to see it working


App Builder 2018.120
- Enhance the Range control by apply to it certain new custom style from the Boostrap CSS framework. This made the Range control (horizontal only) showing in the same manner in all the platforms


App Builder 2018.118
- Fix an error in the Location control, which don't setup in the right way the [Control.Altitude] variable
- Update the Awesome icons fonts to the latest version


App Builder 2018.117
- Update the AngularJS Javascript library core and the used Router, Touch and Sanitize modules to the latest stable version from 1.7.3 to 1.7.4


App Builder 2018.116
- Some very minor changes in the Welcome page of the IDE


App Builder 2018.115
- Some small change in the "CordovaPlugins" app sample, which use an old an non worked ID for the used Cordova plugin. The same change has been made in the "SendSMS" Javascript plugin of DecSoft App Builder


App Builder 2018.114
- Enhance the recently added multiline comments in the code editor. We can now use this feature in a more free way. Now is more easy to use multiline comments since the compiler is less restrictive. Various ways of multiline comments that are not valid before, are now valid in this AB release


App Builder 2018.112
- Detect possible syntax error when use multiline comments in the code editor. Multiline comments must start with /* in a new line and end with */ in a new line. In other some unexpected behaviours can be found, so the AB compiler try to detect this situations to avoid it


App Builder 2018.111
- Update the AngularJS Javascript library core and the used Router, Touch and Sanitize modules to the latest stable version from 1.7.2 to 1.7.3


App Builder 2018.109*
- Remove the AngularJS animation module by two reasons: probably the CSS animation classes that already include App Builder are enough, and, more important, this module is causing certain delay (which can be noted more or less) when hide and show elements


App Builder 2018.108
- Update also the AngularJS UI-Boostrap Javascript libary to their latest version
- Upgrade the Boostrap CSS framework from the 4.1.1 version to the latest 4.1.3 version. Update also the 21 bootswatch themes already included in DecSoft App Builder to the 4.1.3 version of Boostrap CSS
- Enhance the Carousel control in order to properly shown the carousel images in an fluid way by default. You can see that changes in the Carousel app sample


App Builder 2018.107
- Update the AngularJS Javascript library core and the used Animate, Router, Touch and Sanitize modules to the latest stable version from 1.7.0 to 1.7.2


App Builder 2018.106
- Due to a mistake the previous release of App Builder's executables are not digitally signed. This release just fix that mistake with the appropriate sign for that executables


App Builder 2018.105
- Upgrade the moment.js Javascript library included in App Builder to the latest stable version and also fix a warning message when use the DateAdd and DateSubstract actions


App Builder 2018.104
- Fix a bug wich causes that the AlertBox action don't work as expected when use it from an modal or dialog app's view. In fact the AlertBox is shown, but this causes that the dialog or modal app's view cannot be closed with the CloseDialog action, as expected


App Builder 2018.103
- Fix an problem when try to delete an style or script file from the app's files manager. The problem only occur if the original file don't exists, and, this cause that the file manager can't delete the file from the app's project file


App Builder 2018.102

Enhance the App Builder compiler time when compile with debug and without debug information. Here are some results using an real App Builder app:
Before the AB compiler enhancements:
- App with 131 views. Compilation time with debug: 01:16.259 minute
- App with 131 views. Compilation time without debug: 00:50.269 seconds

After the AB compiler enhancements:
- App with 131 views. Compilation time with debug: 00:14.712 seconds
- App with 131 views. Compilation time without: 00:14.115 seconds
- As you can see above the compiler time has been considerable reduced. Not only this: now compile with or without debug information don't mean that the compiler take too much more time in the first case.


App Builder 2018.100
- Enhance the External Javascript tutorial in the program's help file in order to shown how to access to app's global variables from pure Javascript code. Thanks Julio for the advise!
- Fix a minor mistake in the program's installation assistant which causes to use a wrong string from the portuguese catalong, when must be from the spanish one.


App Builder 2018.99
- Remove the now deprecated "createObjectURL" usage from the Webcam success event in order to assign the stream to the video object using the recommended "srcObject" property!


App Builder 2018.97
- Upgrade the brazilian portuguese translation of the App Builder IDE, adding the new introduced strings in the latest releases

App Builder 2018.94
- Added the new AutoCloseAlertBox action (number 260 in App Builder), which is similar to the AlertBox, with the particularity that the alert is closed after the specified seconds
- The MessageBox action can now contains zero butons, so, if we leave the Button arguments empty, no buttons appear in the dialog: then you are responsible to close the MessageBox action using the CloseDialog action
- The MessageBox action Header argument is now optional. This mean that if no header is specified the Message Box header is not visible to the user


App Builder 2018.93
- Fix an introduced bug while try to solve certain issue with the MediaPlayer control some few releases ago


App Builder 2018.92
- Fix an mistake in the app's Files Manager dialog, which causes that the Explorer toolbar button stay enable when in fact there is no file to be explored. The explorer button has been enhanced too in order to be ready to explore styles and scripts, in addition to images, other files and folders


App Builder 2018.91
- Enhance the Checkbox and Radio controls, or, better said, let it working as expected. Before this release we can't change the Caption variable of these controls in runtime, which is not what we can expected


App Builder 2018.90
- Add 14 new app's themes to be available for our apps. This themes are based in Boostrap CSS 4.1.1 version, and, counting the default one, we have now up to 36 app's themes ready to be used in our apps.
- Upgrade the Boostrap CSS framework from the 4.0.0 version to the latest 4.1.1 version. Update also the 21 app's themes already included in DecSoft App Builder to the 4.1.1 version of Boostrap CSS


App Builder 2018.89
- Prevent to fire the Complete and Update events of the MediaPlayer control if we change the view on the Complete event of that control, for example. This avoid certain errors when try to access non existing properties of the MediaPlayer control. Thanks Julio for the report


App Builder 2018.88
- Fix an problem with the Navbar control HTML caused by the upgraded to AngularJS 1.7.0. The error don't cause the app to stop, however, we carefully recommend to upgrade AB to this new release if you use the Navbar control in your app


App Builder 2018.85
- Update AngularJS and the used route, touch, sanitize and animated modules from the 1.6.9 version to the latest 1.7.0 stable version. This AngularJS release include some bug fixed, changes and various enhancements from the previous release
- The program config Debugger options have an Search button, which search for the possible browsers installed in the computer, to be added into the App Builder's Debugger toolbar. Now this Search also recognize Firefox 64 bits installations


App Builder 2018.84
- Fix a bug which occur when the App Builder compiler copy an entire directory previously established in the app's files manager. If after the first compilation the original directory files change (which is something more or less common) the App Builder compiler copy again the directory files into the compilation directoy, but in an wrong place. Now the directory files are copied in the right place.


App Builder 2018.83
- Change log not available for this version


App Builder 2018.82
- Add some useful CSS classes to the Report control, and, more in particular, to the optional "loading" text that can appear in the Report control. If the Report Wrapper is "table", you can now use the "loading-row", "loading-col" and "loading-text" CSS classes. If the Report Wrapper is "grid", you can now use the "loading-container" and "loading-text" CSS classes. Thanks Julio for the suggestion


App Builder 2018.81
- Some minor adaptations in some App Builder IDE labels in order to allows brazilian portuguese and may other translation to properly translate that labels
- Some fixes and enhancements over the brazilian portuguese translation of the IDE of DecSoft's App Builder. Thanks very much Jackson for your work!


App Builder 2018.80
- Add the ItemClick event to the TypeAhead control. This event is fired when the user select one of the available TypeAhead items. The Value variable of the control stores the item that has been selected by the user


App Builder 2018.79
- This DecSoft's App Builder release includes the brazilian portuguese translation for the App Builder's IDE. Only the help file is not translated, but the IDE is completely translated into the brazilian portuguese language


App Builder 2018.78
- Change log not available for this version


App Builder 2018.77
- Made some internal changes and enhance the AB core Javascript in order to allows attributes like "style" in HTML tags inserted via app's variables in certain contexts like in HTML and Report controls


App Builder 2018.76
- The "viewport" HTML meta tag are not correctly written in the app's HTML file, causing that the app appear with an very small font in mobile browsers. This is fixed now, by written the appropriate "viewport" meta tag. This problem has been probably introduced some releases ago, and some customers report to me. Thanks to all!
- Add the icons' "sizes" argument into the Progressive Web Apps JSON manifest. Apparently this argument is requied in order to allows Chrome for Mobile to pick the right icon for our app, when add it as an Progressive Web App


App Builder 2018.75
- Fix an problem in touch screens with the Report controls, which disallow their scroll left and right (in case their columns exceeds the screen width). This problem is related with the Report swipe left and right events, wich now are not refered if we don't use it. Thanks Tin for the report


App Builder 2018.74
- Add some CSS code useful to hide the default caret used in the Dropdown button control. Some other very minor changes, fixes and enhancements


App Builder 2018.73
- Fix a problem with the Navbar control in Android, which causes that the navbar menu did not appear by pressing the Toggle button, if we did not press in some other control before. Also remove the outline of the Toggle button. Thanks Tin for the report
- Update the Font Awesome font files and CSS code to the latest version 5.0.10, which includes a total of 991 icons ready to be used in our apps


App Builder 2018.72
- Add the new Login sample, who provide one of the possible ways to implement an login procedure in our apps. The sample shown how we can login into an app's server, and, how we can then continue requesting contents as an logged user by using an token instead of the user's password. This sample includes various server PHP scripts that requires your attention and study too


App Builder 2018.71
- Made some changes and enhancements in the Welcome page in order to use a btter URL to get the latest threads and posts from the DecSoft's support forum
- Update the "RSS" app sample in order to use the new RSS feed of the DecSoft's support forum. This sample stop to work since we change the support forum system in our website


App Builder 2018.68
- Add the new Dinamic Controls samples (number 172 of App Builder). This app shown how we can insert dinamic controls inside an HTML control container, and, also how to retrieve the possible values for that controls. This is not a very common task and therefore they requires Javascript code usage. On the other hand, there is not only a way to play with HTML and CSS, so, what this app propose is only one of the possible ways to achieve something like that: create dinamic controls


App Builder 2018.65
- The App Builder IDE themes has been removed in this release. The themes are not really useful, probably are not too much used, and, are the responsible for certain anoying error in AB, very difficult to reproduce, very difficult to catch and very difficult to reproduce. The IDE themes, therefore, has been removed. Of course the App Builder IDE continue adapting their interface to the Windows theme


App Builder 2018.64
- Adapt the App Builder's welcome page to the latest changes in the DecSoft's website. We integrate the support forum in the same website, we no more uses a different software, which means our customers must login just one time in our website to give all the benefits of an DecSoft's customer, including the ability to post into the support forum. This release of App Builder adapt and enhance the welcome page to continue viewing the latest support forum posts in a quick way


App Builder 2018.63
- Fix an introduced error in the Radio controls Javascript which causes that they can't work like expected when their Checked property was "False"


App Builder 2018.61
- Add the new CacheView action. This action can be used to preload an app's view HTML template into the internal app's cache, then when that app's view is required, they no need to be loaded from the scratch. This action is not intended to be used for all app's views, but for some of the most common or "first of", so our app's behaviour can be a bit faster
- Improve the way in which the SimpleGet, SimplePost and LoadVariables actions are translated to Javascript. Catch also the possible HTTP error in the LoadVariables action


App Builder 2018.60
- Find some introduced bugs in the previous release when compile some of the available non visual controls. This release fix that introduced bugs


App Builder 2018.59
- Continue with the enhancements in the App Builder compiler in order to reduce the app.js core Javascript file. This release of App Builder changes the way in which the app's controls are declared, reducing the app.js ammount of Javascript and also obtaining a more readable Javascript app.js file. In a simple test, an real app.js of 1,39 MB (1,00 MB after minimize) has been reduced their size up to 1,06 MB (787 KB after minimize)


App Builder 2018.58
- Change log not available for this version


App Builder 2018.57
- Properly catch possible errors in the HTTP calls made by the SimpleGet and SimplePost actions. Now this errors are reported into the [App.LastError] global variable and causes than the app's Error event are fired


App Builder 2018.56
- Fix a bug in the Timer controls, who can cause unexpected behaviours if we try to start and stop it from different views. The problems can be to unable to stop Timers to double Timers intervals executions. This bug is fixed now.


App Builder 2018.55
- Avoid an error if we try to clear a variable with a null valueu using the ClearVariables action. We receive an error in that case that is fixed now


App Builder 2018.54
- The optional "PluginDocumentReadyEvent" function for App Builder Javascript plugins are not executing properly said when the document DOM is ready, but, just a few milliseconds before of that, which can cause some unexpected problems. This is fixed in this release, and, the refered function is executed when the document DOM is really ready to be used


App Builder 2018.53
- Prevent (only in certain scenario) that an shown view fit only the keyboard allowed space (in device with software keyboards) if the keyboard is present when we use the ShowView or ReplaceView actions


App Builder 2018.52
- Add up to 14 splash screen images (and refer it into the config.xml file) to Apache Cordova for iOS, and, more specifically, trying to solve certain issue found when run the apps in an iPhone X device


App Builder 2018.51
- Complete the spanish translation of the App Builder i18n file and update the french translation of the App Builder i18n with some fixes and new strings added


App Builder 2018.50
- Change log not available for this version


App Builder 2018.49
- Increase the Min SDK option for Android to 16 instead of 14. Add the new Android Oreo 8.1 API 27 into the Target SDK ComboBox of the app Cordova / Android options. Establish this option as the selected by default too
- Update the Phonegap CLI version to the latest Apache Cordova version: 8.0.0


App Builder 2018.48
- Change log not available for this version


App Builder 2018.47
- App Builder generates now the new splash screens (named "story boards") for the iOS platform, instead to the "old" splash screen images. These new images are of course also referred in the Cordova config.xml file. Made also some more other changes at the core app CSS. Both of these changes are made in order to be ready with the iPhone X and other iOS devices


App Builder 2018.46
- The "SplashMaintainAspectRatio" and the "StatusBarOverlaysWebView" Cordova options are not properly saved in the Cordova config.xml file, that is, the App Builder compiler do not take in consideration the default values for this option and do something wrong in some cases. This has been fixed now and the refered options are properly saved and used


App Builder 2018.45
- Move the Cordova Screen options from the General tab to the Configuration one. Inside the Configuration tab we place a new page control with an Screen, Statusbar and Extra XML tabs. The Statusbar tab contains three new Cordova Statusbar related options: Overlay WebView, Style and Background color


App Builder 2018.44
- Add the new Configuration tab in the app's options dialog for the Apache Cordova Android platform. Inside this new tab we add a new Splash Screen Maintain Ratio option. This new option allows to choose (for Android) between to maintain the aspect ratio of the splash screens


App Builder 2018.43

Fixed:
- The HistoryBack and the HistoryForward actions don't cause the [App.CurrentView] to be properly set, which is the expected behaviour. Only the ShowView and ReplaceView actions causes the [App.CurrentView] to be properly set. This has been fixed now and all these actions causes the [App.CurrentView] to be filled properly
- The [App.DialogView] variable are not filled in the proper way when more than one dialog view are open (one after another). This variable store an empty string when a second modal view is closed. This problem has been fixed and the [App.DialogView] stores the current modal view or an empty string (if any modal view is opened)
- If we pass some params to an app view the [App.CurrentView] variable are not filled in the right way, and include the params inside the variable, which is not what we can expected. This problem has been solved too in this DecSoft's App Builder release


App Builder 2018.41
- Upgrade the FontAwesome icons to the latest version 5. The IDE icon picker dialog as well the apps can now use up to 929 icons from the FontAwesome pack, including all the Regular, Solid and Brands icons. Note that some icons names has been renamed from the previous FontAwesome 4.x versions. Review your apps and use the IDE icon picker dialog in order to assign new icons if needed


App Builder 2018.39
- Enhance the algorithm used when generate the splash screens for all the supported Apache Cordova platforms. Thanks very, very, very much José! Without your help we probably can't get our desired result: the best as possible! Thanks again!


App Builder 2018.38
- Change the algorithm used when generate the splash screens for all the supported Apache Cordova platforms. Now the provided splash screen is resized, but, only to fit the generated splash screen. This release includes also a bug fix for the generated landscape splash screens, which certainly crop the provided splash screen in a wrong way before this fix.


App Builder 2018.37
- Introducing the app's views' Params variable. Take a look at the app's views' help topic in order to learn about this new variable that every view in the app have now.  Take also a look at the new ViewParams app sample (number 170), that shows how we can use the new views' Params variable.


App Builder 2018.36
- Some other minor changes and enhancements has been made over the App Builder compiler, some of the includes app samples, the program's help file and the spanish translation.
- Added the new CopyVar action. This action allows to copy or assign the specified variable B into the specified variable A. If the variable A did not exists, a new variable is created. If the variable B did not exists, then an "undefined" value is assigned to the variable A. This action did not take in consideration the type of the variables, then we can use this action to copy or assign variables of any type. For example, we can copy or assign an variable B of the type Array, Object, etc. into the specified variable A.
- Change the debug layout dock panels positions. Instead of place all the debug related dock panels at the button and using tabs, now the debug related dock panels are placed at the right. The enhancement is that they are not placed now in tabs, then we can see by a quick view all the debug related panels, without the need to change any tab.


App Builder 2018.35
- Update the Boostrap CSS framework used internally by App Builder, and, update all the Boostrap CSS app themes, from the Boostrap CSS beta 3 version to the first stable Boostrap CSS 4 version.


App Builder 2018.34
- Fix a bug in the Watcher control that occur if we try to set the Watcher variable in runtime. The Watcher control works now as expected, except that they no more start automatically when the app start: we must start it explicitly when we wanted.
- Minor changes in the Database sample (server side scripts) in order to offer the appropriate exception message if we can't connect with the database server. Now, in addition to the "Can't connect to the database" we have the right PHP exception message.


App Builder 2018.33
- Fix a bug related with the Apache Cordova splash screen: few releases ago App Builder uses the App icon if an splash screen is not provided, however, the appropriate addition in the Batch generated files for Apache Cordova are missing.


App Builder 2018.32
- The Welcome page has been redesigned, simplified and enhanced. Some useful links are provided, as well an HTML form to directly search in the program support forum. As before, the latest posts in the forum are listed too.


App Builder 2018.31
- Upgrade Boostrap CSS 4 to the latest version. Do the same with all the 21 themes by bootswatch. Upgrade the HTML markup for Select, Radio and Checkbox controls to fit the latest version of Boostrap CSS 4.


App Builder 2018.30
- Added a new AlertBox app sample (number 169) to show the different types that we can use in the AlertBox, MessageBox and InputBox actions. The MessageBox sample has been enhanced with more types, the possible use of HTML and others.
- Enhance the AlertBox, InputBox and MessageBox actions. Now these actions respect the user selected "type" (primary, secondary, success, danger, warning, info, light, dark) in the best wat as possible: with the correct background and foreground colors.
- Complete the spanish translation of the App Builder i18n file and update the french translation of the App Builder i18n with some fixes and new strings added. Thanks very much for your work Jean!


App Builder 2018.29
- Fix an anoying bug that causes the code editor indentation do not work as expected when we choose an App Builder action from the code editor autocomplete list.
- Enhance the ApplyModel action in order to try to avoid Angular JS "digest" problem when that action are "abused" or not used properly in the right place. Since the error that can cause this action can affect the app behaviour, this fix try to avoid these problems.


App Builder 2018.28
- Added the new FileDownload app sample (number 168). This sample show us how to download an file into the user device storage (to be available for the user) and also download an image file in the app private storage (to be used only by the app).
- Added the Apache Cordova plugin FileTransfer into the app options dialog, under the Cordova / General / Plugins options. This plugin has been added primarely to be used by the new FileDownload action, but can also be used for other purposes too.
- Added the new action FileDownload, which allow us to download files in both the app private storage and the user device storage. See the FileDownload action help reference for more information and details.
- Added an header in all the generated Batch and Shell files for Apache Cordova with the App Builder version and release number. Just for information purposes.
- From some releases ago App Builder pick the app icon to be used as the splash screen of the app, if an specific splash screen is not specified. However, App Builder do not include the appropriate Apache Cordova plugin to show the app splash screen. This is fixed now.


App Builder 2018.27
- Add the new FrontCamera, FlipButton and TorchButton variables / options to the Barcode control. The Barcode app samples has been enhanced in order to shown the usage of these new variables / options of the Barcode control. The program's help file has been also upgraded describing that variables / options too.


App Builder 2018.26
- App Builder never requires a portrait and landscape splash screens anymore, but, just one image, that, the program uses to automatically generate all the splash screen images for all the supported Apache Cordova platforms. This change is made mostly to be ready with the iOS platform, who changes their splash screens conventions. App Builder continue generating portrait and lanscape screens for the supported platforms, but, now based in the only one image that you must to provide in the app
- Fix an introduced error in the conditions related actions wich can cause certain problems if we deal with decimal numbers "as is" (not using variables) in that conditions related actions


App Builder 2018.25
- We are proud to announce that the splash screens for Apache Cordova that App Builder generates for your app, looks now better than never. App Builder uses now certain new algorithm to create the splash screen files for all the Cordova platforms, and, now also saves the aspect ratio of your provided images.
- App Builder creates now the appropriate splash screens for Apache Cordova based in the app icon, if no other images has been provided in the Cordova / Splash options.
- Translate some missing spanish strings in the DecSoft's App Builder i18n file

更新時間：2019-03-30
更新細節：

更新時間：2019-03-30
更新細節：

What's new in this version:

GoodSync 10.9.29
- GSTP server: Fixed Server may get no Assigned Forwarder, show error 'Update your Server to latest version'
- GSTP Server: Fixed re-asking for results of a long-running transaction
- GSTP Forwarder: more fixes for faster reconnects
- MS Graph FS (Office 365, SharePoint): List additional root sites under /sites
- Backblaze B2: Upload of short files,: Do not reuse URL of 'b2_get_upload_url', always get a new URL
- Fixed NTLM auth, used in IIS and Windows Server
- Localization: Fixed localization of GoodSync Account setup was not working


GoodSync 10.9.28
- GsRunner + UnAttended jobs: Drop log lines if GUI did not pick them up, fixes memory leak
- Gs2Go: Allow portable volumes to have Disk Letters A: and B: as diskettes are long gone
- MS Graph: Added support for reading paged responses to /groups query
- GoodSync Account Setup: No Mediator mode: Do not check for dup users or computers on Mediator
- GoodSync Account Setup: No Mediator mode: Allow to keep existing user, after warning
- GSTP Client: if Server got no external port, do not try Direct connection, it is waste of time
- GSTP client: rewrite direct/forwarder decision, to switch faster and more accurately
- GSTP Server: When switching from Forwarder mode to Direct mode, stop Receiver and wait for it
- GSTP Server: Direct mode: finer per Session locking, not per User
- GSTP Server: Fixed Sessions that were Disconnected with Error were not released (memory leak)
- GSTP Server: Make sockets of properly closed sessions linger for 10 sec, for client to receive
- GSTP Server: Pickup Receiver: made it work better when we have lost connections
- GSTP Server: Web UI: improved Settings presentation
- GSTP Server: UDP receiver: Fixed could cycle on multiple UDP receive errors
- GSTP Forwarder: reject inactive sessions on server side sooner, do not let them linger
- GSTP Forwarder: increased speed and stability by more holistic locking mechanism
- GSTP Forwarder: Allow User Forwarders, if user sets 'UserForwarder = Yes' in settings.tix
- License on Linux: fixed Licensing by finding working PNEs, not just eth0/1.


GoodSync 10.9.26
- GsRunner Service: Fixed GsRunner did not come back after Sleep and Wakeup
- GS Account Setup: Computer page: Check that proposed Computer name does not already exist
- Mediator does not allow connecting to Computer if two devices registered under this one name
- Mediator does not allow GSTP-2 protocol, so all GSTP computers must be updated to latest ver 10 or 9
- Forwarders: improved and speed up reconnect sequences
- Activation: if user enters License Key (Batch Code) into OrderID, advise him to do it in GS Account online
- Browse dialog: fixed crash on non-recognized URL
- MEGA FS: Added support for 2-factor authorization
- New CZ localization


GoodSync 10.9.25
- gs-server + Mediator: Fixed registration was happening too often, if no UPNP is present
- Forwarder/GsServer: give client more time to close connection or send EOF
- gs-runner: Use dynamic ports, if default port 33555 is taken
- gs-server: Use dynamic port, if default port 33333 is taken
- GSTP with no UDP: make it work faster by using Pipe Forwarder
- GSTP file close: increase allotted time, so that it can complete
- GSTP client: improved switching from Direct to Forwarder and back
- GSTP receiver: fixed several issues, to speed up session pickup
- Gs and Runner Installer: improved some sequences


GoodSync 10.9.24
- GS-runner integration with GUI: Change it from Shared Memory to socket-based protocol
- Unattended Jobs: show percent of completion, not just general status
- Unattended Jobs: show rolling log, as sync progresses, not the final log at the end of sync
- MS graph (OneDrive, Office): Fixed downloads running over 1 hour produce Auth error
- GSTP: improve speed of reconnect on Receiver Server, if connection is lost on Client side
- RDC tunnel: make it work again, use correct connection type on remote end
- CC Runner: Fixed first AutoUpdate of CC Runner was picking up regular GoodSync
- CC Runner: Fixed user profile was incorrect on initial setup, so log cleanup was too broad
- No Mediator option: show it only for Windows Server and File Server installers
- License Check: do it for GoodSync Account too, wait 60 sec after wakeup from sleep
- Permissions: correct translation of ReadOnly flag from Windows to Linux
- Storage Beta: now allow 100 Gb storage trials


GoodSync 10.9.23
- GSTP: now retries upon error are initiated only by Client, never by Server
- GSTP: improved and speed up cloning of new Sessions via existing Session
- GSTP client: test of Direct conn upon Forwarder conn is done only if we had Direct conn before
- GSTP client: If Server has no UDP port, still wait for connection to be picked up
- Forwarder: do not allow Server-retried Sessions to linger, only Client can make it alive
- DAV: Set Content-Type: mime-type header on Upload, so that file gets proper MIME type
- MS Graph: Fixed error processing on uploads, so that Refresh Token can happen
- MS Graph: improved error processing when getting user credentials
- Load Jobs Groups: do not auto-save if changes were detected on load, wait till user save
- CC Runner, Gsync runner: Cleanup all logs every hour (60 min), not just in GUI
- License Activation: Remove Batch activation, as it should be done in GoodSync account online
- Sort list of displayed Job Groups, in Groups context menu of Job
- Fixed temp file name generation, so it does not produce dups in high speed processing
- Account Web UI: Password Reset: Do Not delete accounts upon confirmation, instead merge them.


GoodSync 10.9.22
- GSTP client: get to direct connection faster, when previously direct gs-server goes back online
- GSTP receiver: more fixes in error processing
- GSTP forwarders: more aggressive cleanup of dead sessions, so that they don't linger
- GoodSync Account Setup: make Not Serving Files option stick properly after restart
- GSTP UserId: do not lowercase GSTP UserId, as it can have upper-case letters in legacy accounts
- GSTP UserId: for all new accounts UserId is derived from Email, and it is always lower-case


GoodSync 10.9.21.1
- Licenses: Fixed License Change notification comes up every 22 hours, even if nothing is changed
- Licenses: When activating from Mediator ver 11 style, delete Encrypted Server Data before writing License
- Create actual installers for File Server and Enterprise Workstation AutoUpdate and Licenses for them
- Uninstall: less waiting for post-uninstall browser, so that it does not hold up uninstall completion
- GoodSync Account Setup: Show Yes/No for Serve Files options, to better explain the No option
- GoodSync Storage: implemented Storage Licenses and Activation
- GoodSync Account UI: added Merge Accounts


GoodSync 10.9.20.4
- Job List: added more locks on Job List operations, to prevent crashes
- Closing GoodSync: fixed rare crashes when Asian keyboards are present
- MS Graph FS: Fixed 'Resolve URI: resolve special path: no slash'
- Browse Dialog: fixed wrong file System selected from SFTP down
- DropBox, WebDAV: improved exponential backoff on codes 503 and 429
- GS Storage: Added Usage, Transfer and Transactions measurement


GoodSync 10.9.19.5

Support new GoodSync Account:
- Activate
- License Check
- Manage Account: auto-login
- Contact Support: auto-login


GoodSync 10.9.19.0
- Tools: Renamed GoodSync Connect Setup to GoodSync Account Setup
- Tools: Added GoodSync Account Manage that Auto-Logins to GS Account web site
- Help - Buy License: specify GoodSync UserId to PUMS, for purchase attribution
- Help - Contact Support: Auto-Login to GS Support System, if GS Account is present
- Activation dialog: make activation via GoodSync Account work properly
- Gs2Go + GoodSync Account: treat USB drive as a virtual Device
- gsync: Add GoodSync Account integration commands /manage-account /buy-license


GoodSync 10.9.18.0
- Activation dialog: Add option to perform activation via GoodSync Account
- Add License Management to GoodSync Account
- GSTP: Report ComputerID to Mediator, so that activated licenses can me matched to Device
- GSTP Client: Fixed reconnect sequence, it was not always retrying
- GSTP Forwarder and Server: fIxed ticket management, to address a case of Mediator restart
- Dropbox: Recover from incorrect_offset errors on large file uploads
- S3, Azure: Added MIME type application/x-mpegurl for extension m3u8


GoodSync 10.9.17.0
- Licenses and Activations: more fixes related to license checks
- New Job Dialog: Make Backup (not Sync) to be the First / Default choice for Job Type
- CC Runner Installer: add options to install CC Runner as Service
- CC Runner Installer: remove rarely used option for Account Password and PIN.


GoodSync 10.9.16.0
- Improve new user experience: no post-update page, more noticeable dialog
- GoodSync start: Encourage users to create GoodSync Account, but allow to Skip it
- GoodSync2Go: allow GoodSync Account in Gs2Go setup and encourage to add it
- Installers: Reset Downloaded from Internet flag, so that installed EXEs do not show warnings
- Browse: Hide old msdrive:// file system, as it is now fully replaced by msgraph://
- MS Graph: Fixed "scope" parameter not stored in FS token cache
- CC Runner Service: Fixed The service did not start due to a logon failure
- Explorer: Fixed upload from SMB does not work
- Use canonic names for executables, no -v10 or -v9 suffix: GoodSync.exe not GoodSync-v10.exe
- License File: change license file format, to prepare for Ver 11
- Gs-server: Fixed registration did not work, if External port is manually assigned
- Sib-socket: better handling for IP v6 addresses
- Mediator: Fixed User NotFound error in Retrieve resulted in closing socket
- Pipe Forwarder: fixed errors in disconnect sequence
- Gs-server consumer: Increase unique clients allowed from 4 to 6
- Turn On by default Program Options -> Security -> Save Password Encrypted
- Gs-server + Network Arrival: Listen for Network Connected / Disconnected events
- Gs-runner + Device Arrival:: listen for this in Runner too, not just in GUI
- Resources: fixed file versions and manifests for all GS executables
- Crash Catcher: Added DbgHelp.dll for x64, 32-bit DLL is not enough
- GoodSync2Go + V9: made GoodSync2Go.bat start GS2Go correctly


GoodSync 10.9.15.1
- GoodSync start: Encourage users to create GoodSync Account, but allow to Skip it
- GoodSync2Go: allow GoodSync Account in Gs2Go setup and encourage to add it
- Installers: Reset Downloaded from Internet flag, so that installed EXEs do not show warnings
- Browse: Hide old msdrive:// file system, as it is now fully replaced by msgraph://
- MS Graph: Fixed "scope" parameter not stored in FS token cache
- CC Runner Service: Fixed The service did not start due to a logon failure
- Explorer: Fixed upload from SMB does not work
- Use canonic names for executables, no -v10 or -v9 suffix: GoodSync.exe not GoodSync-v10.exe
- License File: change license file format, to prepare for Ver 11
- Gs-server: Fixed registration did not work, if External port is manually assigned
- Sib-socket: better handling for IP v6 addresses
- Mediator: Fixed User NotFound error in Retrieve resulted in closing socket
- Pipe Forwarder: fixed errors in disconnect sequence
- Gs-server consumer: Increase unique clients allowed from 4 to 6
- Turn On by default Program Options -> Security -> Save Password Encrypted
- Gs-server + Network Arrival: Listen for Network Connected / Disconnected events
- Gs-runner + Device Arrival:: listen for this in Runner too, not just in GUI
- Resources: fixed file versions and manifests for all GS executables
- Crash Catcher: Added DbgHelp.dll for x64, 32-bit DLL is not enough
- GoodSync2Go + V9: made GoodSync2Go.bat start GS2Go correctly


GoodSync 10.9.14.4
- Browse: Hide old msdrive:// file system, as it is now fully replaced by msgraph://
- MS Graph: Fixed "scope" parameter not stored in FS token cache
- CC Runner Service: Fixed The service did not start due to a logon failure
- Explorer: Fixed upload from SMB does not work
- Use canonic names for executables, no -v10 or -v9 suffix: GoodSync.exe not GoodSync-v10.exe
- License File: change license file format, to prepare for Ver 11
- gs-server: Fixed registration did not work, if External port is manually assigned
- sib-socket: better handling for IP v6 addresses
- Mediator: Fixed User NotFound error in Retrieve resulted in closing socket
- Pipe Forwarder: fixed errors in disconnect sequence
- gs-server consumer: Increase unique clients allowed from 4 to 6
- Turn On by default Program Options -> Security -> Save Password Encrypted
- gs-server + Network Arrival: Listen for Network Connected / Disconnected events
- gs-runner + Device Arrival:: listen for this in Runner too, not just in GUI
- Resources: fixed file versions and manifests for all GS executables
- Crash Catcher: Added DbgHelp.dll for x64, 32-bit DLL is not enough
- GoodSync2Go + V9: made GoodSync2Go.bat start GS2Go correctly


GoodSync 10.9.12.2
- Snapshots + VSS: Fixed snapshots were not working
- gs-server: Fixed 'Empty ServerId' error on some reconnects
- gs-server: Speed up reconnects, by doing fewer transactions
- MS Graph: Recover from 416/fragmentOverlap error on large file uploads
- Browse Dlg: Fixed drilling into non-listable folder was not working
- Browse Dlg: Convert GSTP URLs to new prefixless internal format: server/file:/// to server/
- Browse + GSTP: Fixed clicking different servers fast may result in wrong listing
- GSTP client: Fixed talking to old servers (ver < 10.8.9) did not work
- GSTP client: Fast cloning of connections for parallel workers
- Explorer: speed up ConnectServer task, make it easier to stop
- Explorer + S3: allow deleting (but not renaming) buckets


GoodSync 10.9.11.1
- Browse Dialog + Multi-Select: fixed crashes, fixed several bugs
- UPNP: Speed up and fix UPNP discovery in case a lot of UDP packets is received
- Synclib: Fixed crash in 'Source file size is not the same as Destination file size'
- Sync Progress: Fixed progress in sequence Sync, Stop, Sync again
- When installing CC Runner GUI, stop and remove CC Runner Service for the same user
- Localization: impproved CN, ZH, UA localizations


GoodSync 10.9.10.5
- UPNP discovery: Bigger rewrite, to speed up and simplify Port Forwarding
- gs-server + Quota: Fixed 'Cannot convert to GSIO path' error
- GSTP Tunnel for RDC: Fixed errors on closing of Tunnel by Server
- GSTP client: CloneAndConnect: Faster cloning of connection via Forwarder
- Mega FS: Fixed 'Cannot get file fingerprint' error on really old files


GoodSync 10.9.9.7
- gs-server UPNP discovery: many improvements in UPNP discovery, add SSDP monitoring
- gs-server: Fixed issues in Dynamic Port bind, if preferred port is busy
- gs-server Quota FS: multiple fixes in quota computation
- Mediator: Fixed chaining of grants: (A, B) + (B, C) = (A, C): propagate all properties
- Mediator: When creating Share, first make sure this is unique: ToUserId, ToCompId, ToFolderName
- AutoClear: Do not go into Waiting for User, if AutoClear was performed
- AutoClear: Show Tree when AutoClear is specified and we have Conflicts
- Analyze + Sync: Fixed sync tree was not shown On Analyze+Sync when conflicts are present
- Explorer + RDC: Move calling Remote Desktop from Bookmark List to Server context menu
- Browse Dialog + Multi Select: Do not allow selecting folders from diffrent servers
- Browse: If connecting to Server Root we have Home Folder, navigate to Home Folder instead (FTP, SFTP)
- More optimizations at compile time


GoodSync 10.9.8.8
- GSTP-3: Fixed checking of Proxy was wrong, when determining if we do Pickup Forwarder
- GSTP-3: Better algorithm for determining when to try direct connection
- UPNP: faster UPNP discovery, so that we get external port faster
- UPNP: redo UPNP discovery, if our IP external/internal address changes
- Ver 9 + GSTP-3: make GSTP-3 work in GoodSync Ver 9
- Ver 9: Fixed in Browse dialog clicking file system in the list was showing wrong info


GoodSync 10.9.7.7
- GSTP-3: new version of GSTP protocol: establishes connections faster, better scalability
- GSTP-3 computers (ver ≥ 10.9.7) cannot talk to GSTP-2 computers (ver < 10.9.7)
- So all your computers must be running GoodSync ver ≥ 10.9.7 or ver < 10.9.7, but not mix of both
- GSTP client: fast cloning of connections, speeds up startup of Sync with many threads
- GSTP client: do not list shared computers that are offline, cannot connect to them anyway
- GSTP server: fixed Session pickup may not work on 2nd and later attempts
- GSTP forwarders: present full certificate chain to clients
- GSTP server: fixed Protect System Files feature, adjust to new paths
- GSTP server: fixed GetFileOwnerACL not implemented
- For Windows Server: Increased max number of simultaneous connections from 10 to 15
- Localization: Fixed cannot open file 'C:/Program Files/Siber Systems/GoodSync/en-english.rfi'
- Amazon CD: Added retry on HTTP error 504 Gateway Timeout
- MS Graph: Use token cache file msgraph-fs-cache.tic, just like we did in OneDrive
- MS Graph: Added more file types that cannot be resolved by-path
- Ticket Upload: Show progress of ticket upload, as it can be a time-consuming process
- CC Runner Installer: When updating CC Runner, do not start CC Runner from System Account
- License and Privacy: keep License Agreement and Privacy Policy in separate files


GoodSync 10.9.6.6
- Sync Speed: Fixed excessive locking was slowing down GS GUI when speed limit is low
- Installer: Fixed unchecking Register Desktop still caused Desktop shortcuts coming back
- Installer: Fixed New User was not detected
- Gs2Go Installer: Do not allow install, if no drive is selected
- Google Drive: recovery from missed changes or change latency leaving non-existent file info in cache
- Google Drive, Team Drive, Docs: Fixed order of OFC changes concerning single item
- MS Graph, OneDrive Personal: process incorrect 206 Partial Content returned by MS servers
- gs-server: Show Home Folder in Top Level only if gs-server is logged in as real Windows user
- WinFileSys Elevation: Fixed paths used for SMB shares in elevation
- CC Runner: Service and GUI: Fixed AutoUpdate of CC Runner Service switches to CC Runner GUI
- Explorer: Fixed Copy/Paste from/to Encrypted FS was not working, if not top level
- Explorer: Copy/Move files: always connect two file systems, or it can fail on Encrypted FS
- License: If license file has incorrect size then save a copy of it, for reporting
- License: If we encounter empty Activation ID in stored license file, report an error
- AutoInstall in AutoUpdate: Turn it On by default


GoodSync 10.9.5.5
- GoodSync2Go installer: Fixed several bugs, improved usability
- GoodSync2Go installer: Do not elevate Gs2Go installer
- GS Connect Setup: Improved it, when called from Installer
- Registry Jobs: Fixed Folder Options got damaged when reading
- Installer: improved adding/removing Start Menu and Desktop items


GoodSync 10.9.4.4

- Gs2Go Installer: Fixed Language settings was reset to English on every install
- Gs2Go Installer: Do not stop or start GsServer and other services in Gs2Go installer
- Gs2Go: Use lang.opt file in Profile folder to store Language setting, not registry
- Installer: Keep installer window Topmost, so that it does not get lost
- Gs2Go: Implement separate AutoUpdate for Gs2Go, which downloads its own distribution
- Gs2Go: Implement AutoInstall + AutoUpdate for Gs2Go, run non-elevated


GoodSync 10.9.3.3
- Installer: New Installer for ver 10 that does not use NSIS
- Installer: GoodSync2Go: Do not allow installing to System Disk (C:)
- Installer: CC Runner: Request Company Id, PIN, etc in non-silent mode
- Installer: transaction-based file update that does not delete old program files
- Installer: Ver 9: freeze ver 9, stop producing releases, except for major fixes
- Installer: Localization: do our own localization, based on -.rfs files
- Installer: Logs: When in System Account (MSI), write logs to C:/Program Data/GoodSync
- Mega FS: Added Mega file system (Beta), with mega:// prefix
- Export TIX: Fixed copy of Accounts was not saved to TIX file on Export
- GSTP: Added enforcement of Email and Name length limits, when creating account
- sib-lib: Turn On /O2 optimization in all libraries
- gs-server: Do not require file:// prefix in Home Folders URL
- gs-server: Allow Home Folders and Folder Grants to be combined
- gs-server: Add New User: Remove GsConnect/LocalUser options, it is defined by server type
- Quota File Sys: fixed several issues in disk space usage computation
- Quotas: Implemented disk quota for granted folders
- Forwarder + Receiver: Fixed virt-comp was not passed if Session is initiated via PickupSessions
- Mediator Web UI: Added page to Request Storage
- Mediator Web UI: Break User Account presentation into several tabs


GoodSync 10.9.2.2
- gs-server: Fixed Incremental Analyze did not work for gs-server + On File Change
- gs-server: Fixed wrong paths passed in GetFileCheckSum
- GSTP + OTP: Fixed of Device Authorization was lost, then client can cycle on re-Auth
- GS Connect Web UI: Added Delete Old Devices, that is, devices not seen for N days
- GS Connect Web UI: multiple bug fixes, improve usability
- GSTP sharing: Fixed Sharing did not work, if default forwarder was used
- GSTP sharing: Implemented CanShare flag: Grantor user allows Share to be further shared
- GSTP sharing: Relax format of From Folder, do not require file:// prefix
- Amazon Cloud Drive: Fixed Conflict 409 in Analyze after stopped Sync


GoodSync 10.9.1.5
- Disk Free Space: show it in Explorer and Browse dialog for all file systems that have it
- Sharing: Added chaining of Folder Grants: (A grants to B) + (B grants to C) -> (A grants to C)
- Sharing: Granted Computer now assumes UserId of Grantee user, not that of Grantor user, as before
- gs-server and forwarders: Fixed passing of Delegated Auth flag
- gs-server: Added flag DirectOnly to settings.tix. If Yes, it declares that it needs no Forwarders
- gs-server: Added flag GrantsOnly to settings.tix. If Yes, server rejects all non-grant folders
- gs-server: Fixed /set-admin, /set-user and /del-user commands: load settings before them
- MS Graph OneDrive/Office: Fixed OAuth2 token endpoints for regional clouds
- Fixed vulnerability where GoodSync can load malicous DLL from its program folder
- Moved European Forwarder to bigger server in Amsterdam
- Added GDPR clause to Privacy Policy, added GDPR page to web site
- Linux .run installer: Fixed profile owner when configuring gs-server daemon to run under limited user
- Gs-Server for Synology NAS: Better integration with DSM UI, according to DSM standards


GoodSync 10.9.0.5
- Gs-Server: get rid of internal file:// in URL pointing to gs-server, so that
- gstp://comp.user.goodsync/file:///disk/folder becomes gstp://comp.user.goodsync/disk/folder
- Browse Dlg: Fixed checking for GSTP computer being local, when GS offers to change to Local FS
- Browse Dlg + Side Options: Fixed Side Options do not change when sync folder changes in Browse dlg
- Side Options: Allow turning Off Use Temp Files option for Local FS, as in rare cases it may not have MoveFile
- Do not Delete Dest file on Direct Upload only when both RecycleBin and History are turned off
- Sync Scripts: Do not Call Script / Send Email after Analyze that ended with Wait for User
- Windows FS + SMB: Fixed resolution of SMB paths that are used in Local FS
- Amazon CD: Retry on Error 502 Bad Gateway, returned by ACD server
- Encrypted FS: Implemeted GetFileOwner(), GetFileOwnerACL(), SetFileOwnerACL()
- TLS/SSL: updated list of valid root certificates and Certificate Authorities
- Gs-Server Web UI: Fixed logout did not cause forgetting credentials in the browser
- DE and AR localization updated


GoodSync 10.8.9.9

- Encryption Side Option: Merge Encrypt Names/Bodies into one option
- Encryption Side Option: Added Test Encryption button, to test Encryption Password on folder
- Encryption Side Option: Added Empty Sync Folder button, to wipeout folder when Encryption changes
- Encrypted File System: Added conveyerization to it, so that it can upload much faster
- Side Option FAT-like: Show it for GSTP file systems too, as FAT may be hiding behind GSTP
- GSTP server + Home FS: Make Folders grow directly from GSTP server, without qhome:// FS and Server S0
- Sharing + Forwarder: Make Sharing work via Forwarders
- Sharing: Fixed folder list when Grantor's server is presented as two different servers to Grantee
- Azure FS: Not Found in ConnectFS is now ignored, not a real error
- Installer: Add Marker to all dialogs and message boxes, so that they can be closed by Installer
- File Upload: If destination file system is atomic, do not delete destination file before upload
- Side Options: Use Temp Files: Make this option always On for Local File System
- MS Graph: Added ability to address sites and sub-sites by name
- Browse Dialog: Reorder file systems, hide old and unused file systems


GoodSync 10.8.8.8

- SFTP: Major Speedup of Uploads, up to 20 times faster on fast networks
- SFTP: Added support for ECDSA host key algorithms, such as SSH-ED25519
- Sharing: Fixed drilling into shares where server name seen by Grantee differs from Grantpr's name
- File Open: Fixed files were not open in GS Explorer from Sync tree
- Sockets: speed up socket upload and download on high speed networks
- MS Graph: Added option "Request Group.All.Read scope", off by default
- MS Graph: Added Region option for National Clouds: US govt, DE, CN
- MS Graph: miscellaneous bug fixes and speed improvements
- S3 DreamHost: Allow parts upload on DreamHost, they finally implemented it
- Get/Set ACL GSTP: Send ACL in the HTTP body which can handle newlines in ACL
- Gsync, gscp, gs-server: get rid of extra newline in console output
- Gs-server: Allow only TLS 1.2, enable ECDH and show three strong cipher suites by default


GoodSync 10.8.7.7

- SFTP: Major Speedup of Uploads, up to 20 times faster on fast networks
- Sockets: speed up socket upload and download on high speed networks
- MS Graph: Added option "Request Group.All.Read scope", off by default
- MS Graph: Added Region option for National Clouds: US govt, DE, CN
- MS Graph: miscellaneous bug fixes and speed improvements
- S3 DreamHost: Allow parts upload on DreamHost, they finally implemented it
- Get/Set ACL GSTP: Send ACL in the HTTP body which can handle newlines in ACL
- Gsync, gscp, gs-server: get rid of extra newline in console output
- Gs-server: Allow only TLS 1.2, enable ECDH and show three strong cipher suites by default


GoodSync 10.8.6.6

- MS Graph: many changes in browsing, show all Sites and Drives
- MS Graph: Acquire Group.Read.All and Sites.ReadWrite.All permissions, to see Sites
- MS Graph: Add icon and description, fixed several bugs
- S3: V4 auth: Escape : and * too, or we get signature errors
- GoodSync2Go: Fixed GoodSync2Go.bat file did not start EXE on 32-bit system
- File Monitoring: Do Monitoring only for Local/Net file systems, not for remote systems
- Device ID: fixed corrupted device id sent for non-latin computer names
- Thousands Separator: Fixed adding , or . separator in case of non-standard Number Format
- Crash Catcher: Do not report exception that we caught, if we could not walk the stack
- Gsync and other console apps: Make them show foreign characters
- Filters: fixed bugs in handling Absolute Include filters
- CC Runner: Do not log sensitive info, such as passwords
- Gsync: Fixed /oauth option not working
- Gscp: Add handling of /profile= and logging command line options


GoodSync 10.8.5.5
- MS Graph: many changes in browsing, show all Sites and Drives
- MS Graph: Acquire Group.Read.All and Sites.ReadWrite.All permissions, to see Sites
- MS Graph: Add icon and description, fixed several bugs
- S3: V4 auth: Escape : and - too, or we get signature errors
- GoodSync2Go: Fixed GoodSync2Go.bat file did not start EXE on 32-bit system
- File Monitoring: Do Monitoring only for Local/LocalNet file systems, not for remote non-monitor systems
- Device ID: fixed corrupted device id sent for non-latin computer names
- Thousands Separator: Fixed adding , or . separator in case of non-standard Number Format
- Crash Catcher: Do not report exception that we caught, if we could not walk the stack
- gsync and other console apps: Make them show foreign characters
- Filters: fixed bugs in handling Absolute Include filters
- CC Runner: Do not log sensitive info, such as passwords
- gscp: Add handling of /profile= and logging command line options


GoodSync 10.8.4.4
- MS Graph: Added new file system for Microsoft Drive, based on new MS Graph API
- MS Graph: This is Experimental Beta release, less subject to Error 429 though
- Fixed: Cannot connect to local GoodSync server: server: Cannot get user: User -(undefined)-
- Do not allow Limited User to use Elevation to get to folders that are forbidden to him
- Account Manager: Do Not remove Accounts that have no File System for their URL
- S3: Fixed getting location of bucket for URL-based scheme, could cause infinite recursion


GoodSync 10.8.3.7
- Backblaze B2: fixed progress indication in upload of large files
- Amazon S3: Now always use V4 auth (AWS4-HMAC-SHA256) headers
- S3: Us Govt Cloud: Always use region us-gov-west-1 for it
- Deduplication + GSTP: Fixed download of dedup file from GSTP was showing it of zero size
- GoodSync2Go: Added 64-bit EXEs to files installed by GS2GO installer
- GoodSync2Go: Store DeviceID in Profile/deviceid.tix on GS2Go disk
- GoodSync2Go: improve folder structure, have only file GoodSync2Go.bat at the top that runs 32-bit or 64-bit
- gs-server: Fixed Unique Server Id was not set sometimes, when gs-server started
- gs-server: Improve startup and restart sequence
- gsync: Get /profile= option before other options, so that commands are applied to the specified profile
- LogViewer: improve init sequence, write logs of LogViewer to log folder
- Visual Sync Tree: Add File To Sync tree view that shows unsynced files, update it during Sync
- Visual Sync Tree: Changes View shows Proposed Changes, that do not change as Sync progresses
- Visual Sync Tree + AutoSync: Do not drop the tree after AutoSync finishes


GoodSync 10.8.2.2
- Auto-Install on Auto-Update: new scheme with Waiter process, provides instant restart
- Auto-Install on Auto-Update: install it any time Jobs are not running, not just 3AM to 5AM
- Auto-Install on Auto-Update: non-installer URLs now will all go to browser
- De-Elevation after Installer: do not use Windows Tasks for it, use our own restart
- Special Operations: fixed rare crashes caused by Spec Ops + Direction Change
- Crash Catcher: do not catch exceptions not related to GoodSync
- Sockets: fixed shutdown sequence for Listen sockets, fixes rare crashes
- Accounts and Jobs Load: Fixed Import of Job that point to incorrect Account
- Control Center Runner Installer: more fixes
- Control Center Job Upload: Fixed Job Command line generator for several job options
- SFTP: Added support for ECDH key exchange algorithms: ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, diffie-hellman-group14-sha256, diffie-hellman-group16-sha512, diffie-hellman-group18-sha512


GoodSync 10.8.1.1
- SyncLib: optimize performance bottlenecks, so that it runs faster
- ZipStream read/write: optimize performance bottlenecks, so that it runs faster
- Crash Catcher: do not react to crashes that happen not on GoodSync stack
- GSTP client: fixed crashes, if many clients Connect all at once
- Sib-Socket Shutdown: fixed force shutdown did not cause effect on Linux
- License: Added lock to reading and writing License file and registry
- CC Runner Service Install: Remove NT Domain from SysUserID before using it
- Account Manager: save copy of accounts-bookmarks.tic file after each migration
- SyncLib: Delete all *._gstmp files if they are more than 24 hours old
- Mediator: Disabled TLSv1, SSLv3, enabled ECDHE for better encryption
- Google Drive: Fixed Make Folder in Browse Quick mode may cause cache problems


GoodSync 10.8.0.8
- Multiple Workers in SyncLib: Fixed crashes, caused by insufficient locking of Job Progress
- On File Change: Fixed rare crashes when *.tmp file was encountered and deleted
- Rewrote Crash Catcher, to catch more real crashes and fewer unrelated crashes
- Optimization: Turned Off /O2 optimization in SyncLib And GsFileSys, as it prevents crash analysis
- Generate SyncOp instead of New File Conflict, if non-intersecting L and R gen lists are far apart time-wise
- On File Change: make Job wait 30 sec between Analyze and Sync, if Errors or Conflicts were detected
- On File Change: make Job wait 30 sec after Sync, if User Stop was detected
- Sync Tree Toolbar: Fixed Item counts were not updated when new tree is built by Analyze
- Upload Jobs: Fixed Command Line errors in uploading jobs


GoodSync 10.7.9.9
- Multiple Workers in SyncLib: Fixed crashes, caused by insufficient locking of Job Progress
- Generate SyncOp instead of New File Conflict, if non-intersecting L and R gen lists are far apart time-wise
- On File Change: make Job wait 30 sec between Analyze and Sync, if Errors or Conflicts were detected
- On File Change: make Job wait 30 sec after Sync, if User Stop was detected
- Sync Tree Toolbar: Fixed Item counts were not updated when new tree is built by Analyze


GoodSync 10.7.9.7
- Google Drive: Introduce Quick Mode, used in Browse, so that Cache is initialized only in Analyze
- Google Drive: Keep backup of disk cache file, use backup file in case primary file is damaged
- Google Drive: do not send redirect_uri when refreshing Access Token, or else we get Error 400
- Box.com: Rewrite listings to use marker pagination instead of offset pagination
- Box.com: Skip over web_link items, they are not files or folders anyway
- OAuth2 File Systems: retry connections on OAuth2 token refresh, to fix connection errors
- On File Change: stop file upload when it has been change on source side
- Progress: Reset Job Bytes and other progress items when Incremental Sync starts
- SyncLib: Fixed file deletion was possible in GSTP jobs, when connection was lost during Analyze
- gs-server: Make Mediator reg attempts more aggressive when Discovery starts
- Proxy in Sockets: Fixed If Proxy Auto/Manual is Off, sometimes it was used if Proxy Host/Port were set
- Gs-Server and Gs-Runner services were not reacting to Sleep, now they suspend when going to Sleep
- Added command: Tools -> Upload Jobs to Control Center
- Program Options -> Security: Added option: Accounts Encryption Password
- CC Runner Installer: Added CL option for Accounts Encryption Password
- CC Runner Installer: Added CL options for Mini Progress and Allow User To Exit
- CC Runner: Added reaction to: Sleep, Wakeup, Logoff (End Session), WMI messages


GoodSync 10.7.8.8
- MS drive: Use new MS Graph for Discovery Service, as old OneDrive system stopped working with Error 401
- MS drive: improve error messages when discovery fails, instead of showing dropped connection
- gsync CL options: Move /override-locks from Run Options into Job Options (non-persistent)
- CC Runner: When installing CC Runner, set it to Start When Windows Starts, not GS GUI
- Google Drive/Docs V3: Implement "delete" for files/folders that were shared with current user


GoodSync 10.7.7.5
- Google Docs: Added Google Docs file system with gdocs3:// prefix. It shows only Google Docs, not Files
- Google Team Drive: Fixed changes.list parsing in case when Team Drive object itself is modified
- Azure Files: Set root folder flags properly, so that top level folder cannot be used for sync
- Browse Dialog: Allow Deleting Folder Bookmarks inside Accounts, not just whole Accounts
- Browse Dialog: When Account has been deleted, set Current URL to previously seen account
- CC Runner: When installing GoodSync by User then always reset EnterpriseRunnerConfig flag
- Uninstaller: Fixes icon was not shown, could crash on Windows XP
- SyncLib: Glue several Notes (Comments) together, separated by '; '
- Sync Tree Direction User Change: Speed up processing, when many items are selected
- Menus: Move New Job command from All menu to Job menu
- Gs-Server on Windows XP: Fixed error: User Impersonation failed: acquire privileges
- On File Change + Exclude Empty Folders: Fixed adding new file to empty folder does not get synced
- Import: Re-Added Import of Old Format .TIX files
- Licenses: Rename Pro License to Personal, clarified license language in the program and web site
- Licenses: Updated License Agreement to reflect changed terminology
- Gs-Server license: Do not check User and Session count when client from 127.0.0.1 comes in
- gsync command line: more fixes to command line parser
- Explorer Progress: fixed upload/download progress for many small files


GoodSync 10.7.6.7
- Change log not available for this version


GoodSync 10.7.6.6
- GoodSync Licenses: renamed 'Enteprise Server' to 'For Server OS'
- GoodSync Licenses: renamed 'Pro (Fixed)' to 'Personal'
- Browse Dialog, Multi-Select: Fixed opening unchecked folder could cause checking it and parents
- WinFileSys + SMB: process deduplicated links, for which DeviceIoControl returns error 4390
- Dropbox: Implemented download in blocks, this improves download of large files
- Runners: Make their instance mutex names unique per profile, not per authed Windows User
- gs-server: Fixed logs stopped writing after server-initiated restart
- Fixed AuthCode Activation did not work
- gsync command line: Fixed job-delete was not working
- GoodSync.exe command line: Allow window size options to be combined with job commands
- Command Line: Fixed Connectoid Options were not always making it into Jobs
- Command Line: ReAdded optins /exit and /exit-ifok, to be used in GoodSync GUI only
- Fixed GoodSync MSI Installer shows warning on Windows Server


GoodSync 10.7.5.5
- Runner Service Setup: When setting up Runner Service, use full DomainUserName, not just UserName
- Goodsync2Go: Fixed installer of GS2Go, it was not working in 10.7.3-4 due to command line parsing issues
- CC Runner Installer: Add new mode /cc-runner=update which updates CC Runner to the mode from last time
- Fixed GoodSync GUI does not show state of GS Runner Service jobs
- Ver 9: fixed installer, it also uses new gs-runner now
- gs-server Unique Clients limitation: Increase it to Allowed 4 clients, show Client IP addresses


GoodSync 10.7.4.4
- Fixed GoodSync installer did not create proper Registry value to Run GoodSync When Windows Starts
- CC Runner: fixed bug in upgrading, which could result in Runner being declared a new Runner
- CC Runner: fixed upgrading using regular GoodSync-v10-Setup.exe installer was resetting CC Runner flag
- GoodSync Connect Setup: Now always delete Old Users, so that only new New user is left
- Gs-Server Web UI: Added warning about too many gs-server users, per license
- Browse Dialog: Multi-Select: Fixed if only one Folder is Excluded, it becomes the new Sync Folder
- Command Line: Fixed /analyze and /sync options of 'job' command were ignored if they come first


GoodSync 10.7.3.3
- Job Options -> General: Added option to Shutdown Computer after Job is finished
- Job Options -> General: Added option to limit Max Time To Run (minutes)
- Program Options: When Retain Days changes, start complete cleanup with the new value
- Job and Program Options: trim string values such as UserId or Smtp Host
- SyncLib: Added File Size to Copy New/Over log message, when syncing
- Installer: Fixed GoodSync GUI can be randomly started by Scheduler, esp if Avast is installed
- Installer: speed up installation of GoodSync, fixed some issues
- Browse Dlg: Multi-Select: If Include List is empty, still show Implied Checked checkbox
- Gs-server: Added Limitation on Number of Users and Number of Unique Clients, based on License
- File Server License for GSTP gs-server: added new License for gs-server-based File Server
- Scripts and Email: Added variables: %TSTART% %TFINISH% %TELAPSED%
- Command Line: improved command line parse, to catch more errors in CL options
- Sib-socket + SSL: Turned off TLS session cache on client side, only FTPS uses it now
- Command Line: Discontinue parsing Jobs and Program Options in GS GUI, we have gsync for that
- Added/Fixed policies: DisableAzureFile, DisableGDrive2, DisableGTeamDrive, DisableSharepoint
- Gsync: Added 'auth' command that creates new accounts (OAuth, browser auth) from command line
- CC Runner: Added new Control Center GUI Runner, with Taskbar icon, that shows status of jobs run by CC
- CC Runner Installer may install CC Runner as a Taskbar GUI or as a Windows Service
- CC Runner can automatically update itself to latest version, if CC specifies AutoInstall option


GoodSync 10.7.2.2
- Added new Google Team Drive file system to GoodSync and GoodSync Explorer
- Automatically start GoodSync GUI, if silent install is On and GS GUI was running before silent install
- Installer: Make de-elevation to happen by starting GoodSync via Windows Task Scheduler
- Installer: When installer start GoodSync GUI, make sure it goes on top of Z-order
- Filters in Program Options: Show Global Filters: Exclude System / Hidden / Empty
- Fix adding of Filter flags for Empty folders, when uniting Global and Job Filter
- Fixed Delete Recycled and History Files was not deleting History DB
- Jobs in Registry: Fixed crash in ver 9 when loading Jobs from Registry
- Remove GoodSync-v9.exe from GoodSync v10 distribution, use ver 9 distro instead
- Parallel Thread limits: increase to 64 for SFTP, FTP, GSTP
- FTP: Added option 'Require TLS session reuse on data connection', On by default
- FTP: Turn off this option to resolve connectivity problem with broken servers
- More localizations for Group Names, etc.


GoodSync 10.7.1.1
- Amazon CD: Fixed GetMetadataEndPoint Unauthorized Error 401
- OneDrive: Add retry on 503 Service Unavailable
- Progress: fixed progress reporting in simple uploads such as to GSTP
- Parallel Threads: S3 and Azure: Increase max parallel threads from 20 to 64
- Control Center Runner: Fixed few finishing lines of Job Run were not submitted
- Control Center Runner: Summarize/Compress update-job-run requests, to reduce server load
- Gsync /runner and /enter-runner: Allow only one instance of each per User
- Program Options + Command Line: Add processing of Global Filters and some newer options
- Browse Dialog + Filters + Multi-Select: multiple fixes, improve usability
- Update DE localization


GoodSync 10.7.0.0
- GSTP Sharing: Enable Sharing of Folder on Mediator: now Folders can be shared with other GoodSync users
- GSTP Sharing: For now Sharing of Folder is done only in GoodSync Connect account Web GUI
- GSTP Mediator: Remove Talkback processing, as it is 2 years old, so only really GS versions use it
- Passwords: Add option Save Connect Passwords Locally Encrypted, it makes them non-portable, more secure
- Program Options: Added Security tab, for the option above and CC admin credentials
- Account Manager + OAuth2: new scheme of storing tokens and getting auth via Browser
- OAuth2: maintain Refresh and Access Token in a separate cache, not to change Accounts
- Office365/SharePoint: increase initial backoff timeout to 15 sec, on error 429
- TeamSites/SiteRoot/SharePoint: Forbid # % characters in paths as it causes error 400 on uploads
- Browse Dlg + Multi-Select + Links: fix handling of Links in Drilled and CopyAsIs job modes
- Import: Fixed Import of a single job could destroy unnamed bookmarks, thus damaging other jobs
- Reading Accounts and Jobs: Fixed recovery of broken Jobs file (with no Accounts file) causing problems
- Explorer: do not allow any file/folder actions while folder is being listed
- CheckSums: store CheckSum type, as relying on CheckSum size for typing does not always work
- Updated Polish localization


GoodSync 10.6.8.8
- History Cleanup: Use History DB to speed up cleanup of _history_ files
- Recycled and History and Log Cleanup: now do it after every sync, as it runs faster
- Recycled and History Options: change their names and description, to better explain what they do
- Recycled and History + Direct Destination (No Temp): Use MoveFile, not CopyFile, to run faster
- Filters: Do not apply Size and Time filters to Folders
- Filters: speed up and simplify Filters processing
- CheckSums: Fixed sometimes CheckSums of different types were compared
- CheckSums: Do not use CheckSums of wrong type from the state file
- CheckSums: Fixed uploading of Office file changed by server could result in conflict
- Analyze: Fixed ListDir could be called on Files as if they were Folders, resulting in slowdown
- Links + Exclude: Fixed Ignore Links was not always excluding Links nodes
- Links + Browse: Drill Down to Folder Links in Browse Dlg + MultiSelect, if SymLinks option is Drill Down
- gsync command line: Fixed command line options description and manual, to latest changes
- OneDrive/Office365: Backoff on 429 Too Many Requests and Conflict 409 error with EditConflict
- SharePoint 2013: Fixed ListDir return error when path points to a file or not found
- SharePoint 2013: Backoff on 429 Too Many Requests and Conflict 409 error with 'Save Conflict'
- MTP: Fixed change file name case did not work properly


GoodSync 10.6.7.7
- Licensing Fixes: Auto Options are not available in Free version
- Licensing Changes: Increase max files to 1000 in Free version
- GSTP Client: When doing Disconnect, set SendRecvTimeout to 5 sec
- GSTP Client: When talking to local elevated client, do not wait on reconnect
- GSTP Client: check that server-id received from Server is not empty
- GSTP Receiver: Do Not close socket on Receiver side after we send Disconnect verb
- GSTP Receiver: Send info headers such as server-id
- Azure (Blob) file system: Fixed large file uploads, more than 4 Gb
- Filters: Fixed filter '/folder/' with tail '/' was not excluding folder
- Separate Installer for GoodSync for Windows Server
- Fixed Jobs File reading and import, so that Import does not repeat
- Accounts File: improve locking of read/write of Accounts file
- Ver 9: Move ver 9 version number to 9.16.7, to make it be in sync with ver 10


GoodSync 10.6.6.8
- Browse Dlg + One Driver: Fixed freezes and error when drilling down to top folder after OAuth
- GSTP Forwarder Receiver: Do not report to Mediator errors caused by Forwarder Pipe disconnecting
- GSTP Client: when client lost connection to Server do not do long reconnects, report to Mediator
- Filters: allow [a-z] or [0-9] and other such character ranges in Filters, [ and ] mean [ and ]
- Filters: when adding Filters from GUI, turn [ into [ and ] into ]
- Filters: fixed several more exotic issues in exclusion and inclusion
- On File Change: Add 1-min wait between Analyze and Sync, when Analyze produces Errors or Conflicts
- Runner: Do not save changes by produced by Job Options checker
- On File Change, Incremental Analyze: fixed error when file inside folder is reported before this folder
- Fixed Free Space was not updated on Sync Tree file/folder Direction Change
- Backblaze B2: Fix rare concurrency crash on folder delete
- Licensing: Do not allow Auto jobs (Attended) to run in Free mode
- Gs-Client/Gs-Server on Linux: Added support for Unix extended attributes.


GoodSync 10.6.6.6
- Change log not available for this version


GoodSync 10.6.5.5
- Control Center Runner: Fixed job start and stop sequence, to improve reporting
- Control Center: Fixed log lines sometimes glue together
- Google Drive: make it work when changing existing empty UserId to new UserId from OAuth
- Google Drive V2 and V3: change captions and help
- FTP etc: When reading line, allow CR to be followed by non-CR/LF character
- Windows FS: Use Backup Semantics for all CreateFile system calls, fixes Access Denied
- Windows FS: Fixed MoveFile was giving up on Access Denied, now tries Copy + Delete
- Browse Dlg: Fix Deleting Account used by Job is allowed, if bookmark inside Account is selected
- gs-server: GetFileAcl: Fix error in returning GetFileAcl results
- MTP: make progress processing work correctly
- MTP: Fixed name-case renames of file and folders were not working in Explorer
- ListServers: fixed copying credentials, fixes No Account error in Analyze after Browse
- gs-server: /set-admin and /set-user options also set options in settings.tix
- gsync command line: Left and Right folder of a Job: allow combining AM and Connectoid options


GoodSync 10.6.4.7
- Change log not available for this version


GoodSync 10.6.4.4
- MTP: re-add missing thread wrapper, it was causing CoInitialize not called (error 0x800401F0)
- MTP: make progress processing work correctly
- Move/Rename: make it work for case-insensitive file systems, where only case of name is changed
- On File Change: fix bugs and slowness, when change of one file/folder is received many times
- On File Change + Incremental Analyze: fix bugs in folder processing
- On File Change + Incremental Analyze + Filters: apply all filters, so that filtered items are ignored
- On File Change + Progress: show progress of Incremental Analyze too
- Runner + Gs-server Options: gs-server now applies Program Option on a command from Runner
- Runner: If user with old jobs.tic never runs GS GUI, still convert jobs.tic to new format
- S3 + Wasabi: Wasabi can do Upload in Parts, so allow multi-part upload
- User Stopping Jobs: Fixed urgent job stop (two or more Stop clicks) was not always processed
- On Schedule: fixed normalization of Schedules, it could fix DayOfWeek to 0 when not needed
- Browse Dialog: fixed non-translated GSTP email can make it into Account Manager
- Locks: Consider lock files that are older than 2 days abandoned and delete them as such
- Move creation of _gsdata_ folders from Start of Sync to Start of Analyze
- Explorer: When renaming file or folder, check that destination name does not already exist
- gs-server: fix command line processing and diagnostics
- NAS: Added support for Synology DS418j (Realtek 1296 platform


GoodSync 10.6.3.3
- OpenSSL: Add no-asm option to x64 builds, that fixes crashes on some processors
- Crash Catcher: add more catchers for crashes, to improve diagnostics of crashes
- Better random number generator, with proper initialization of OpenSSL
- Mediator: Fixed OTP was not sent by email, on initial OTP generation
- Mediator Web Site: Add Password Change form, fix OTP usability issues and bugs
- Web UI: Allow entering One Time Passwords (OTP) from Web UI, for multiple users
- Web UI: Do not create New GoodSync Connect user in Web UI, use Mediator Web Site
- Web UI: better display of Mediator registration status for the User
- GoodSync Connect Setup: always show No-Mediator option, fix bugs and crashes
- GSTP: Fix progress not reported in GsUploadFileBlock, in the tail part
- CC Runner: Fixed Big Log chunks not accepted by CC, so submit large logs in smaller 16 Mb chunks


GoodSync 10.6.2.9
- Change log not available for this version


GoodSync 10.6.2.4
- Change log not available for this version


GoodSync 10.6.2.2
- Runner: Fix worker thread closing sequence, it could cause rare crashes
- On Schedule: When Hour=NN is specified and Minute=0 is not specified, add Minute=0 automatically
- On File Change + Stop: When User stops an OFC job, do not stop File Monitoring
- Auto Jobs + Stop: Stop of one AutoRun job now does not reset Waiting To Run Status for all jobs
- gs-server settings: save changed file upon generation of Device ID, even if original file was not present
- OneDrive of MS: Fix SiteRoot uploads of files with ' in filename was not working
- Gs-Server: Add One Time Passowrd support in Web UI Setup for NAS


GoodSync 10.6.1.7
- Azure Files: Add Windows Azure Files API file system, was Azure Blobs only
- Fix handling of must-drill-down OneDrive files/folders (appear in Windows 10 Fall 2017 Update)
- Auto Jobs: Fix on a rare oaccasion Job in Auto Mode not start when required by external event
- GSTP forwarders: Add SSL certs to all Official and Default forwarders
- FTP + On Folder Connect: Fix OFC was not detecting Connect/Disconnect
- Exploer: fix navigation when clicking bookmark in bookmark list for file system
- Explorer: Disable all Commands when tree node is being expanded


GoodSync 10.6.0.0
- GSTP: Implemented One Time Passwords (OTP) and Client DeviceId
- GSTP: You can turn on OTP in https://www.goodsync.com/gs-connect/user-account
- GSTP: Prefer Emails as UserIds, they are also used in One Time Password auth
- When OTP is On, you will receive Email with OTP every time you use a new Device
- GoodSync client will request One Time Password sent in Email
- GSTP: OTP is requested when doing GoodSync Connect Setup and Browse dialog
- GSTP: Each client/server now sends DeviceId, ComputerId, and Device Description
- GSTP: Both email and old-style GS Connect UserId may be used to authenticate
- GSTP: New Account Form: Add ReCaptcha to filter out robots
- Official Forwarders: use Forwarder IP name, not IP address, to please security
- Official Forwarders: use port 443, not 80 for SSL comms, to please security
- Receiver: Fix incorrect reporting of connections to Official forwarders
- OTP + gs-server: allow OTP in /set-admin=user_id:password[/otp-value]:sys_user:[sys_pass]
- OTP + gsync: allow OTP in new command line options /can-otpN=yes, /otpN=string
- Cleanup Logs: Avoid recursive cycling via symlinks, by limiting number of folder levels to 50
- GSTP progress: show progress when is being added to at the tail
- Enterprise Policies: fix non-enforcement of NoAutoUpdate policy
- Runner Setup: If Runner Service user and this Windows user differ, issue warning
- Runner: Change gs-server settings on a cue from CC only if Runner is elevated
- Azure: fix space and # encoding issues that could cause Not Found for files and folders
- Google Drive: Fix Not Found error, that usually occurs on lock.gsl


GoodSync 10.5.8.5
- ACD: do reconnects, to fix 'Cannot Switch to SSL' error cause by ACD serves malfunction
- Fix file operations progress reporting jumpiness, make it more smooth
- CC Runner: Fix GsRunnerSubmitter thread was not shutting down properly
- Explorer: Fix Rename does not update display name
- SyncLib: Get destination file attribute after sync, needed if Compare Attr is used
- Jobs from Registry: fix load and save of such jobs


GoodSync 10.5.7.7
- ACD: do reconnects, to fix 'Cannot Swtich to SSL' error cause by ACD serves malfunction
- Fix file operations progress reporting jumpiness
- Explorer: Fix Rename does not update display name
- SynLib: Get destination file attribute after sync, needed if Compare Attr is used


GoodSync 10.5.6.6
- OneDrive: Fixed 'Unsupported security token' error
- Explorer: Fixed when clicking folder with ftps:// URL, it becomes ftp:// URL
- Azure: Fixed sometimes assigning check-sums to a wrong file, due to parsing error
- Browse Dlg: If two or more folders do not exist in Job side path, do not allow clicking them all
- Control Center Upload: Fixed quote-screening issue that cause errors in names with quotes
- Control Cneter Runner: Fix lockup of Runner after job was renamed in Control Center
- Filters Pane: Sort filters lexicographically
- Job Options/Program Options: Place Include filters above Exclude filters, to match order of execution
- Job Tree Toolbar counters: rewrite to keep live counters correctly updated


GoodSync 10.5.5.4
- FT

更新時間：2019-03-30
更新細節：

What's new in this version:

App Builder 2019.27
- The DecSoft App Builder compiler has been enhanced when check for possible modifications in app's files like splashs, icons, javascript, styles, images and other files. To decide if the files has been changed or not (and therefore if need to be copied / refreshed in the app compiled directory) the compiler use now the file write date time, in addition to just the file sizes, which sometimes cause some "false negatives"


App Builder 2019.26
- Enhance the AdMob Javascript plugin and the AdMob app sample in order to implement various actions missing in the first version of the AdMob Javascript plugin of App Builder. Now it's possible to create banners before show it, prepare interstitials to be show later, and, also prepare and show reward videos


App Builder 2019.25
- Fix a bug when copy a Container control from one app's view to another app's view: before this fix the pasted control do not respect the name of the original one


App Builder 2019.24
- Change log not available for this version


App Builder 2019.23
- Change log not available for this version


App Builder 2019.21
- Added the Signature2 app sample (number 181 in App Builder). This app sample is simlar to the Signature one, except that we use the Cordova's Files plugin in order to save the user's signature in a JPG image, inside an Android device, for example, and, without using any server side
- Added the new Signature app sample (number 180 in App Builder). This app sample show how we can use the Signature PAD Javascript library in order to get a signature from the app's user, and, finally download the signature (only in browsers) or get their Base64


App Builder 2019.20
- The type of the [App.Online] variable is not string, not boolean. Even when we can deal with this variable using actions like "VarIsTrue", certainly, follow the convention the referred variable is not of the string type, which can be useful, for example, for the "If" action (condition), that we can use without the usage of "VarIsTrue" nor other action


App Builder 2019.19
- Fix an introduced error in the previous release in the MediaSetVolume action. The error occur only if we use a MediaPlayer control in their Audio flavour and with their AutoPlay variable set to false (which is the default value)


App Builder 2019.17
- aImprove the App Builder compiler cache trying to be more accurate when we need to remove some piece of code from the cache, in other words, try to remove the compiled cache when we modify any app or view or control property, etc.


App Builder 2019.16
- Add the new Dropdown3 sample (number 179 of App Builder). This sample shown how we can use the new Direction variable / option added to the Dropdown control, and also how we can combine it with the already existing Alignment variable / option of the control
- Remove the "Caret" variable from the Dropdown control. This variable has been removed due to the new variable added to this control: Direction, which allows to indicate the direction of the dropdown menu from these possible values: dropdown (by default), dropup, dropleft and dropright


App Builder 2019.15
- Change the Apache Cordova plugin used by the SendSMS Javascript plugin of DecSoft App Builder. The old used plugin don't work anymore as expected. This new one not only works well, but also ask for the appropriate permissions to the user in order to properly work
- Minor internal changes in the Report control, only in their "table" mode. Now the container of the Report's table has the appropriate Boostrap CSS class to made the Report's table responsive


App Builder 2019.14
- Update Font Awesome to the latest version. This release of App Builder also update the Icon Picker dialog, which now include up to 1500 icons ready to use
- Update the CSS and Javascript of the Boostrap framework to the latest stable version. Update also the app's themes provided by bootswatch.com
- Update the AngularJS Javascript library core and the used Aria, Route, Touch and Sanitize modules to the latest stable version from 1.7.6 to 1.7.7
- The App Builder installer uses now the latest version of Inno Setup. Among other changes, this present now a much modern install assistant pages


App Builder 2019.13
- Add the new StartEvent app sample (number 178 in App Builder). This app sample shown how to use the recently added app's Start event, and, specifically, how to use it to change the recently added app's configuration variable "window.App.Config.DefaultView"
- Added the new "window.App.Config.DefaultView" variable. This is a new kind of variables internally used by App Builder, and that can be set from the recently added apps' Start event. This specific configuration variable determine the app's default view, in other words, what view of the app is shown to the user when the app is loaded, and also the view that is shown to the user if the app's URL specify a non existing view
- Add the new app's Start event to our apps. This event is the very first fired in our apps and can be used to perform some actions before any of the app's stuff has been initialized. This event only allows pure Javascript code, not App Builder's actions, and, can't access to stuff like app's views, controls, global variables, etc. However, the app's Start event can do useful things, for example, change some App Builder's configuration variables


App Builder 2019.12
- Change log not available for this version


App Builder 2019.11

- We are very, very proud with this particular App Builder release. This release has an enhanced compiler, which can compile our apps up to 85% faster than before! This is especially useful when work in apps with a large number of views, that is, apps with 150 views or more, which is not very common, but perfectly possible
- The referred enhancement in the App Builder compiler not only allows to compile our apps up to 85% faster, but the compilation time scale now in a better way too, in other words, no matter if our apps have 10, 100 or 200 views : the compilation time become the same, since App Builder compile now only the modified views
- The above enhancements in the App Builder compiler provide a better work flow now. In a real app that we are developing, with 162 views (and growing), before this release they take 19 seconds in order to compile. This may appear not too many time, however, is it, when we need to compile and run the app over and over again, in order to test the changes, etc. This release of App Builder compile the same app (162 views) in less than 4 seconds
- Add a new checkbox into the program's options dialog / compiler, in order to allows to choose to hide the new app's compiler cache directory or not. By default the compiler cache directory appear hidden, in the same folder than the app's compiled directory and the app's backup directory.
Smaller apps has been also affected with the referred compiler enhancement, that is, more or less commo apps, with 10, 20 app views, also compile up to 85% faster than never, however, since these apps take before around 3 seconds to compile... now we can see this apps compiling in 1 seconds or less
- Prevent an "Access violation" error which can be appear (multiple times) in certain circumstances when some specific messages has been added into the Debugger console


App Builder 2019.10
- Add the new WebCamStop action (number 261 in DecSoft App Builder) to allows to stop a previously started reproduction of the specified WebCam control


App Builder 2019.9
- Add the new Biometric app sample (number 177 of App Builder), which show how we can use the recently added Biometric Javascript plugin for DecSoft's App Builder. Some other fixes has been made too in the other available plugins' help files
- Add the new Biometric Javascript plugin for DecSoft's App Builder. This plugin allows to use the biometric sensor of Android and iOS devices if available. For Android the plugin can deal with the Fingerprint sensor, and for iOS the plugin support the Touch ID and Face ID biometric sensors


App Builder 2019.8
- Change log not available for this version


App Builder 2019.7
- Change log not available for this version


App Builder 2019.6
- Add all the available Apache Cordova Files plugin directories into the Directory argument of the FileRead, FileWrite and FileAppend actions. Before this change we only can choose a couple of the available directories: now all of them are available, but it's your responsability to take care about what directory you can use (some of them are not available in all the platforms, for example)


App Builder 2019.5
- Change log not available for this version


App Builder 2019.4
- Fix a non expected behaviour if we want to set to "True" the Corrected variable of a Camera control. If you wanted the referred variable to "False", then there is no problem. However, if you plain to set the referred variable to "True", AB don't set the appropriate value in the right way, so, in fact a "False" value is used


App Builder 2019.3
- Enhance the way in which the program take care of the folders specified in the app's files manager, in order to be copied into the compiled app, so become available for the app


App Builder 2019.2
- Change log not available for this version


App Builder 2019.1
- Update the copyright year. This is the first 2019 release of the product, and, it's a major release. Maybe your license become outdated if you purchase the product before 01/01/2018. You can continue using your current license by downloading an outdated release. Login in your DecSoft's area for both: download outdated releases and purchase upgrades licenses. Please, contact us if you have any questions


App Builder 2018.135
- Avoid the Javascript error which is produced if a control do not exists in the app and we try to use the actions Show, Hide, Toggle, Enable and Disable
- Fix a mistake in the updater feed archive which cause that App Builder cannot inform to the user if a new release of the program is available


App Builder 2018.134
- The Focus and the Blur actions check now if the element which we want to give the focus really exists in the document DOM, avoiding an error if that element do not exists


App Builder 2018.133
- Change log not available for this version


App Builder 2018.132
- Add the Report19 app sample (number 176 in DecSoft App Builder). This app sample is similar than the Report app sample, except that the Report19 sample shown how to use Base64 encoded images inside a Report control
- Due to certain wrong definition in the AngularJS "compileProvider" of the app, we can experiment some problems, or just can't use Base64 codified images inside HTML Content or Report controls. This release fix this and now we can use this that stuff without problems


App Builder 2018.131
- Add a new option into App's options -> Cordova -> Splash, which allows to determine if certain fade in and out effect must be applied or not to the app's splash screen
- Add a new option into App's options -> Cordova -> Splash, which allows to determine if the app must show or not the spinner progress while the splash screen is visible
- Add a new option into App's options -> Cordova -> Splash, which allows to determine the color of the progress spinner (at least in the Android and Windows platforms)
- Update the spanish translation of the App Builder ID with the new stuff and also other stuff that remain without translate before this release


App Builder 2018.130
- Enhance the Disable, Enable, Show, Hide and Toggle actions in order to accept composed strings + variables for their Control name argument


App Builder 2018.128
- Allow to select (in order to use it when compile our app with Apache Cordova) the Android API 28 (Android 9.0 Pie) from the app's options at Cordova -> Android -> General tab in the app's options dialog


App Builder 2018.127
- Enhance the Disable, Enable, Show, Hide and Toggle actions in order to accept not only a simple control name string, but also app's variables, even inside user app functions


App Builder 2018.126
- Add the new "AllowEdit" variable to the Camera control. This variable is available at design and runtime and allow simple editing of image before the selection of the taken image


App Builder 2018.125
- Fix a very ugly bug when we try to use certain Unicode characters inside the app, more in particular, inside any control than accept text / HTML like HTML Content, Report, Push buttons, etc. We encourage to our customers to upgrade to this AB release, since the refered bug can cause that our entire project file become empty and therefore we can loss our work in the app! Thanks Paolo for the information about this bug


App Builder 2018.124
- Made some changes in the Calculator app sample GUI, as well in their configuration, in other to include the Cordova status bar plugin, which solves certain issue in the new iPhones X, XR, XS and XS Max
- Change the viewport of the HTML index.html (app main file) to "cover" instead to "contain". This is useful for the new iPhone X, XR, XS and XS Max


App Builder 2018.123
- Update the AngularJS Javascript library core and the use Aria, Route, Touch and Sanitize modules to the latest stable version from 1.7.4 to 1.7.5


App Builder 2018.122
- Add a new "Build and run" command in the Run menu and Run toolbar. This command is exactly like the "Build" one, except that, after build the app, this is launched in the AB internal debugger browser. Sometimes we don't want to add the debug information into the Javascript, but if so we need to build and then run the app. This new command do this last task in one click


App Builder 2018.121
- Fix an unexpected behaviour with the Radio controls. These controls "miss the model" if we goto another app's view. The Checked variable of the Radio controls has been removed, in order to solve this unexpected behaviour
- If your app uses the Checked variable of the Radio controls, please, review your code. You must use the Radios' Group variable in order to check one or another Radio controls. See the Radio app sample to see it working


App Builder 2018.120
- Enhance the Range control by apply to it certain new custom style from the Boostrap CSS framework. This made the Range control (horizontal only) showing in the same manner in all the platforms


App Builder 2018.118
- Fix an error in the Location control, which don't setup in the right way the [Control.Altitude] variable
- Update the Awesome icons fonts to the latest version


App Builder 2018.117
- Update the AngularJS Javascript library core and the used Router, Touch and Sanitize modules to the latest stable version from 1.7.3 to 1.7.4


App Builder 2018.116
- Some very minor changes in the Welcome page of the IDE


App Builder 2018.115
- Some small change in the "CordovaPlugins" app sample, which use an old an non worked ID for the used Cordova plugin. The same change has been made in the "SendSMS" Javascript plugin of DecSoft App Builder


App Builder 2018.114
- Enhance the recently added multiline comments in the code editor. We can now use this feature in a more free way. Now is more easy to use multiline comments since the compiler is less restrictive. Various ways of multiline comments that are not valid before, are now valid in this AB release


App Builder 2018.112
- Detect possible syntax error when use multiline comments in the code editor. Multiline comments must start with /* in a new line and end with */ in a new line. In other some unexpected behaviours can be found, so the AB compiler try to detect this situations to avoid it


App Builder 2018.111
- Update the AngularJS Javascript library core and the used Router, Touch and Sanitize modules to the latest stable version from 1.7.2 to 1.7.3


App Builder 2018.109*
- Remove the AngularJS animation module by two reasons: probably the CSS animation classes that already include App Builder are enough, and, more important, this module is causing certain delay (which can be noted more or less) when hide and show elements


App Builder 2018.108
- Update also the AngularJS UI-Boostrap Javascript libary to their latest version
- Upgrade the Boostrap CSS framework from the 4.1.1 version to the latest 4.1.3 version. Update also the 21 bootswatch themes already included in DecSoft App Builder to the 4.1.3 version of Boostrap CSS
- Enhance the Carousel control in order to properly shown the carousel images in an fluid way by default. You can see that changes in the Carousel app sample


App Builder 2018.107
- Update the AngularJS Javascript library core and the used Animate, Router, Touch and Sanitize modules to the latest stable version from 1.7.0 to 1.7.2


App Builder 2018.106
- Due to a mistake the previous release of App Builder's executables are not digitally signed. This release just fix that mistake with the appropriate sign for that executables


App Builder 2018.105
- Upgrade the moment.js Javascript library included in App Builder to the latest stable version and also fix a warning message when use the DateAdd and DateSubstract actions


App Builder 2018.104
- Fix a bug wich causes that the AlertBox action don't work as expected when use it from an modal or dialog app's view. In fact the AlertBox is shown, but this causes that the dialog or modal app's view cannot be closed with the CloseDialog action, as expected


App Builder 2018.103
- Fix an problem when try to delete an style or script file from the app's files manager. The problem only occur if the original file don't exists, and, this cause that the file manager can't delete the file from the app's project file


App Builder 2018.102

Enhance the App Builder compiler time when compile with debug and without debug information. Here are some results using an real App Builder app:
Before the AB compiler enhancements:
- App with 131 views. Compilation time with debug: 01:16.259 minute
- App with 131 views. Compilation time without debug: 00:50.269 seconds

After the AB compiler enhancements:
- App with 131 views. Compilation time with debug: 00:14.712 seconds
- App with 131 views. Compilation time without: 00:14.115 seconds
- As you can see above the compiler time has been considerable reduced. Not only this: now compile with or without debug information don't mean that the compiler take too much more time in the first case.


App Builder 2018.100
- Enhance the External Javascript tutorial in the program's help file in order to shown how to access to app's global variables from pure Javascript code. Thanks Julio for the advise!
- Fix a minor mistake in the program's installation assistant which causes to use a wrong string from the portuguese catalong, when must be from the spanish one.


App Builder 2018.99
- Remove the now deprecated "createObjectURL" usage from the Webcam success event in order to assign the stream to the video object using the recommended "srcObject" property!


App Builder 2018.97
- Upgrade the brazilian portuguese translation of the App Builder IDE, adding the new introduced strings in the latest releases

App Builder 2018.94
- Added the new AutoCloseAlertBox action (number 260 in App Builder), which is similar to the AlertBox, with the particularity that the alert is closed after the specified seconds
- The MessageBox action can now contains zero butons, so, if we leave the Button arguments empty, no buttons appear in the dialog: then you are responsible to close the MessageBox action using the CloseDialog action
- The MessageBox action Header argument is now optional. This mean that if no header is specified the Message Box header is not visible to the user


App Builder 2018.93
- Fix an introduced bug while try to solve certain issue with the MediaPlayer control some few releases ago


App Builder 2018.92
- Fix an mistake in the app's Files Manager dialog, which causes that the Explorer toolbar button stay enable when in fact there is no file to be explored. The explorer button has been enhanced too in order to be ready to explore styles and scripts, in addition to images, other files and folders


App Builder 2018.91
- Enhance the Checkbox and Radio controls, or, better said, let it working as expected. Before this release we can't change the Caption variable of these controls in runtime, which is not what we can expected


App Builder 2018.90
- Add 14 new app's themes to be available for our apps. This themes are based in Boostrap CSS 4.1.1 version, and, counting the default one, we have now up to 36 app's themes ready to be used in our apps.
- Upgrade the Boostrap CSS framework from the 4.0.0 version to the latest 4.1.1 version. Update also the 21 app's themes already included in DecSoft App Builder to the 4.1.1 version of Boostrap CSS


App Builder 2018.89
- Prevent to fire the Complete and Update events of the MediaPlayer control if we change the view on the Complete event of that control, for example. This avoid certain errors when try to access non existing properties of the MediaPlayer control. Thanks Julio for the report


App Builder 2018.88
- Fix an problem with the Navbar control HTML caused by the upgraded to AngularJS 1.7.0. The error don't cause the app to stop, however, we carefully recommend to upgrade AB to this new release if you use the Navbar control in your app


App Builder 2018.85
- Update AngularJS and the used route, touch, sanitize and animated modules from the 1.6.9 version to the latest 1.7.0 stable version. This AngularJS release include some bug fixed, changes and various enhancements from the previous release
- The program config Debugger options have an Search button, which search for the possible browsers installed in the computer, to be added into the App Builder's Debugger toolbar. Now this Search also recognize Firefox 64 bits installations


App Builder 2018.84
- Fix a bug which occur when the App Builder compiler copy an entire directory previously established in the app's files manager. If after the first compilation the original directory files change (which is something more or less common) the App Builder compiler copy again the directory files into the compilation directoy, but in an wrong place. Now the directory files are copied in the right place.


App Builder 2018.83
- Change log not available for this version


App Builder 2018.82
- Add some useful CSS classes to the Report control, and, more in particular, to the optional "loading" text that can appear in the Report control. If the Report Wrapper is "table", you can now use the "loading-row", "loading-col" and "loading-text" CSS classes. If the Report Wrapper is "grid", you can now use the "loading-container" and "loading-text" CSS classes. Thanks Julio for the suggestion


App Builder 2018.81
- Some minor adaptations in some App Builder IDE labels in order to allows brazilian portuguese and may other translation to properly translate that labels
- Some fixes and enhancements over the brazilian portuguese translation of the IDE of DecSoft's App Builder. Thanks very much Jackson for your work!


App Builder 2018.80
- Add the ItemClick event to the TypeAhead control. This event is fired when the user select one of the available TypeAhead items. The Value variable of the control stores the item that has been selected by the user


App Builder 2018.79
- This DecSoft's App Builder release includes the brazilian portuguese translation for the App Builder's IDE. Only the help file is not translated, but the IDE is completely translated into the brazilian portuguese language


App Builder 2018.78
- Change log not available for this version


App Builder 2018.77
- Made some internal changes and enhance the AB core Javascript in order to allows attributes like "style" in HTML tags inserted via app's variables in certain contexts like in HTML and Report controls


App Builder 2018.76
- The "viewport" HTML meta tag are not correctly written in the app's HTML file, causing that the app appear with an very small font in mobile browsers. This is fixed now, by written the appropriate "viewport" meta tag. This problem has been probably introduced some releases ago, and some customers report to me. Thanks to all!
- Add the icons' "sizes" argument into the Progressive Web Apps JSON manifest. Apparently this argument is requied in order to allows Chrome for Mobile to pick the right icon for our app, when add it as an Progressive Web App


App Builder 2018.75
- Fix an problem in touch screens with the Report controls, which disallow their scroll left and right (in case their columns exceeds the screen width). This problem is related with the Report swipe left and right events, wich now are not refered if we don't use it. Thanks Tin for the report


App Builder 2018.74
- Add some CSS code useful to hide the default caret used in the Dropdown button control. Some other very minor changes, fixes and enhancements


App Builder 2018.73
- Fix a problem with the Navbar control in Android, which causes that the navbar menu did not appear by pressing the Toggle button, if we did not press in some other control before. Also remove the outline of the Toggle button. Thanks Tin for the report
- Update the Font Awesome font files and CSS code to the latest version 5.0.10, which includes a total of 991 icons ready to be used in our apps


App Builder 2018.72
- Add the new Login sample, who provide one of the possible ways to implement an login procedure in our apps. The sample shown how we can login into an app's server, and, how we can then continue requesting contents as an logged user by using an token instead of the user's password. This sample includes various server PHP scripts that requires your attention and study too


App Builder 2018.71
- Made some changes and enhancements in the Welcome page in order to use a btter URL to get the latest threads and posts from the DecSoft's support forum
- Update the "RSS" app sample in order to use the new RSS feed of the DecSoft's support forum. This sample stop to work since we change the support forum system in our website


App Builder 2018.68
- Add the new Dinamic Controls samples (number 172 of App Builder). This app shown how we can insert dinamic controls inside an HTML control container, and, also how to retrieve the possible values for that controls. This is not a very common task and therefore they requires Javascript code usage. On the other hand, there is not only a way to play with HTML and CSS, so, what this app propose is only one of the possible ways to achieve something like that: create dinamic controls


App Builder 2018.65
- The App Builder IDE themes has been removed in this release. The themes are not really useful, probably are not too much used, and, are the responsible for certain anoying error in AB, very difficult to reproduce, very difficult to catch and very difficult to reproduce. The IDE themes, therefore, has been removed. Of course the App Builder IDE continue adapting their interface to the Windows theme


App Builder 2018.64
- Adapt the App Builder's welcome page to the latest changes in the DecSoft's website. We integrate the support forum in the same website, we no more uses a different software, which means our customers must login just one time in our website to give all the benefits of an DecSoft's customer, including the ability to post into the support forum. This release of App Builder adapt and enhance the welcome page to continue viewing the latest support forum posts in a quick way


App Builder 2018.63
- Fix an introduced error in the Radio controls Javascript which causes that they can't work like expected when their Checked property was "False"


App Builder 2018.61
- Add the new CacheView action. This action can be used to preload an app's view HTML template into the internal app's cache, then when that app's view is required, they no need to be loaded from the scratch. This action is not intended to be used for all app's views, but for some of the most common or "first of", so our app's behaviour can be a bit faster
- Improve the way in which the SimpleGet, SimplePost and LoadVariables actions are translated to Javascript. Catch also the possible HTTP error in the LoadVariables action


App Builder 2018.60
- Find some introduced bugs in the previous release when compile some of the available non visual controls. This release fix that introduced bugs


App Builder 2018.59
- Continue with the enhancements in the App Builder compiler in order to reduce the app.js core Javascript file. This release of App Builder changes the way in which the app's controls are declared, reducing the app.js ammount of Javascript and also obtaining a more readable Javascript app.js file. In a simple test, an real app.js of 1,39 MB (1,00 MB after minimize) has been reduced their size up to 1,06 MB (787 KB after minimize)


App Builder 2018.58
- Change log not available for this version


App Builder 2018.57
- Properly catch possible errors in the HTTP calls made by the SimpleGet and SimplePost actions. Now this errors are reported into the [App.LastError] global variable and causes than the app's Error event are fired


App Builder 2018.56
- Fix a bug in the Timer controls, who can cause unexpected behaviours if we try to start and stop it from different views. The problems can be to unable to stop Timers to double Timers intervals executions. This bug is fixed now.


App Builder 2018.55
- Avoid an error if we try to clear a variable with a null valueu using the ClearVariables action. We receive an error in that case that is fixed now


App Builder 2018.54
- The optional "PluginDocumentReadyEvent" function for App Builder Javascript plugins are not executing properly said when the document DOM is ready, but, just a few milliseconds before of that, which can cause some unexpected problems. This is fixed in this release, and, the refered function is executed when the document DOM is really ready to be used


App Builder 2018.53
- Prevent (only in certain scenario) that an shown view fit only the keyboard allowed space (in device with software keyboards) if the keyboard is present when we use the ShowView or ReplaceView actions


App Builder 2018.52
- Add up to 14 splash screen images (and refer it into the config.xml file) to Apache Cordova for iOS, and, more specifically, trying to solve certain issue found when run the apps in an iPhone X device


App Builder 2018.51
- Complete the spanish translation of the App Builder i18n file and update the french translation of the App Builder i18n with some fixes and new strings added


App Builder 2018.50
- Change log not available for this version


App Builder 2018.49
- Increase the Min SDK option for Android to 16 instead of 14. Add the new Android Oreo 8.1 API 27 into the Target SDK ComboBox of the app Cordova / Android options. Establish this option as the selected by default too
- Update the Phonegap CLI version to the latest Apache Cordova version: 8.0.0


App Builder 2018.48
- Change log not available for this version


App Builder 2018.47
- App Builder generates now the new splash screens (named "story boards") for the iOS platform, instead to the "old" splash screen images. These new images are of course also referred in the Cordova config.xml file. Made also some more other changes at the core app CSS. Both of these changes are made in order to be ready with the iPhone X and other iOS devices


App Builder 2018.46
- The "SplashMaintainAspectRatio" and the "StatusBarOverlaysWebView" Cordova options are not properly saved in the Cordova config.xml file, that is, the App Builder compiler do not take in consideration the default values for this option and do something wrong in some cases. This has been fixed now and the refered options are properly saved and used


App Builder 2018.45
- Move the Cordova Screen options from the General tab to the Configuration one. Inside the Configuration tab we place a new page control with an Screen, Statusbar and Extra XML tabs. The Statusbar tab contains three new Cordova Statusbar related options: Overlay WebView, Style and Background color


App Builder 2018.44
- Add the new Configuration tab in the app's options dialog for the Apache Cordova Android platform. Inside this new tab we add a new Splash Screen Maintain Ratio option. This new option allows to choose (for Android) between to maintain the aspect ratio of the splash screens


App Builder 2018.43

Fixed:
- The HistoryBack and the HistoryForward actions don't cause the [App.CurrentView] to be properly set, which is the expected behaviour. Only the ShowView and ReplaceView actions causes the [App.CurrentView] to be properly set. This has been fixed now and all these actions causes the [App.CurrentView] to be filled properly
- The [App.DialogView] variable are not filled in the proper way when more than one dialog view are open (one after another). This variable store an empty string when a second modal view is closed. This problem has been fixed and the [App.DialogView] stores the current modal view or an empty string (if any modal view is opened)
- If we pass some params to an app view the [App.CurrentView] variable are not filled in the right way, and include the params inside the variable, which is not what we can expected. This problem has been solved too in this DecSoft's App Builder release


App Builder 2018.41
- Upgrade the FontAwesome icons to the latest version 5. The IDE icon picker dialog as well the apps can now use up to 929 icons from the FontAwesome pack, including all the Regular, Solid and Brands icons. Note that some icons names has been renamed from the previous FontAwesome 4.x versions. Review your apps and use the IDE icon picker dialog in order to assign new icons if needed


App Builder 2018.39
- Enhance the algorithm used when generate the splash screens for all the supported Apache Cordova platforms. Thanks very, very, very much José! Without your help we probably can't get our desired result: the best as possible! Thanks again!


App Builder 2018.38
- Change the algorithm used when generate the splash screens for all the supported Apache Cordova platforms. Now the provided splash screen is resized, but, only to fit the generated splash screen. This release includes also a bug fix for the generated landscape splash screens, which certainly crop the provided splash screen in a wrong way before this fix.


App Builder 2018.37
- Introducing the app's views' Params variable. Take a look at the app's views' help topic in order to learn about this new variable that every view in the app have now.  Take also a look at the new ViewParams app sample (number 170), that shows how we can use the new views' Params variable.


App Builder 2018.36
- Some other minor changes and enhancements has been made over the App Builder compiler, some of the includes app samples, the program's help file and the spanish translation.
- Added the new CopyVar action. This action allows to copy or assign the specified variable B into the specified variable A. If the variable A did not exists, a new variable is created. If the variable B did not exists, then an "undefined" value is assigned to the variable A. This action did not take in consideration the type of the variables, then we can use this action to copy or assign variables of any type. For example, we can copy or assign an variable B of the type Array, Object, etc. into the specified variable A.
- Change the debug layout dock panels positions. Instead of place all the debug related dock panels at the button and using tabs, now the debug related dock panels are placed at the right. The enhancement is that they are not placed now in tabs, then we can see by a quick view all the debug related panels, without the need to change any tab.


App Builder 2018.35
- Update the Boostrap CSS framework used internally by App Builder, and, update all the Boostrap CSS app themes, from the Boostrap CSS beta 3 version to the first stable Boostrap CSS 4 version.


App Builder 2018.34
- Fix a bug in the Watcher control that occur if we try to set the Watcher variable in runtime. The Watcher control works now as expected, except that they no more start automatically when the app start: we must start it explicitly when we wanted.
- Minor changes in the Database sample (server side scripts) in order to offer the appropriate exception message if we can't connect with the database server. Now, in addition to the "Can't connect to the database" we have the right PHP exception message.


App Builder 2018.33
- Fix a bug related with the Apache Cordova splash screen: few releases ago App Builder uses the App icon if an splash screen is not provided, however, the appropriate addition in the Batch generated files for Apache Cordova are missing.


App Builder 2018.32
- The Welcome page has been redesigned, simplified and enhanced. Some useful links are provided, as well an HTML form to directly search in the program support forum. As before, the latest posts in the forum are listed too.


App Builder 2018.31
- Upgrade Boostrap CSS 4 to the latest version. Do the same with all the 21 themes by bootswatch. Upgrade the HTML markup for Select, Radio and Checkbox controls to fit the latest version of Boostrap CSS 4.


App Builder 2018.30
- Added a new AlertBox app sample (number 169) to show the different types that we can use in the AlertBox, MessageBox and InputBox actions. The MessageBox sample has been enhanced with more types, the possible use of HTML and others.
- Enhance the AlertBox, InputBox and MessageBox actions. Now these actions respect the user selected "type" (primary, secondary, success, danger, warning, info, light, dark) in the best wat as possible: with the correct background and foreground colors.
- Complete the spanish translation of the App Builder i18n file and update the french translation of the App Builder i18n with some fixes and new strings added. Thanks very much for your work Jean!


App Builder 2018.29
- Fix an anoying bug that causes the code editor indentation do not work as expected when we choose an App Builder action from the code editor autocomplete list.
- Enhance the ApplyModel action in order to try to avoid Angular JS "digest" problem when that action are "abused" or not used properly in the right place. Since the error that can cause this action can affect the app behaviour, this fix try to avoid these problems.


App Builder 2018.28
- Added the new FileDownload app sample (number 168). This sample show us how to download an file into the user device storage (to be available for the user) and also download an image file in the app private storage (to be used only by the app).
- Added the Apache Cordova plugin FileTransfer into the app options dialog, under the Cordova / General / Plugins options. This plugin has been added primarely to be used by the new FileDownload action, but can also be used for other purposes too.
- Added the new action FileDownload, which allow us to download files in both the app private storage and the user device storage. See the FileDownload action help reference for more information and details.
- Added an header in all the generated Batch and Shell files for Apache Cordova with the App Builder version and release number. Just for information purposes.
- From some releases ago App Builder pick the app icon to be used as the splash screen of the app, if an specific splash screen is not specified. However, App Builder do not include the appropriate Apache Cordova plugin to show the app splash screen. This is fixed now.


App Builder 2018.27
- Add the new FrontCamera, FlipButton and TorchButton variables / options to the Barcode control. The Barcode app samples has been enhanced in order to shown the usage of these new variables / options of the Barcode control. The program's help file has been also upgraded describing that variables / options too.


App Builder 2018.26
- App Builder never requires a portrait and landscape splash screens anymore, but, just one image, that, the program uses to automatically generate all the splash screen images for all the supported Apache Cordova platforms. This change is made mostly to be ready with the iOS platform, who changes their splash screens conventions. App Builder continue generating portrait and lanscape screens for the supported platforms, but, now based in the only one image that you must to provide in the app
- Fix an introduced error in the conditions related actions wich can cause certain problems if we deal with decimal numbers "as is" (not using variables) in that conditions related actions


App Builder 2018.25
- We are proud to announce that the splash screens for Apache Cordova that App Builder generates for your app, looks now better than never. App Builder uses now certain new algorithm to create the splash screen files for all the Cordova platforms, and, now also saves the aspect ratio of your provided images.
- App Builder creates now the appropriate splash screens for Apache Cordova based in the app icon, if no other images has been provided in the Cordova / Splash options.
- Translate some missing spanish strings in the DecSoft's App Builder i18n file