Freeplane 歷史版本列表
更新時間：2020-10-05
更新細節：
What's new in this version:
R-Studio 8.14 build 179675
- Change log not available for this version
R-Studio 8.14 build 179623
- Change log not available for this version
R-Studio 8.14 build 179611
New features:
- Fast search for lost partitions has been added.
- Support for the ISO9660 file system used in CDs/DVDs/ISO images has been added.
- Support for the UStar/Tar/CPIO/Pax file systems used in tape storage devices has been added (Technician version).
Improvements:
- Extended control over file preview has been added. Files can now be marked for recovery, recovered, etc., directly from the built-in File previewer.
- Extended control and display of scanned and unscanned disk areas has been added.
- A special mark has been added for a folder with marked files that are hidden by the applied mask.
- A complete overhaul of symbolic and other links processing has been made.
- An option to recover only marked files matching the applied file mask or all marked files has been added to the Recover dialog box.
- The algorithm that estimates chances for successful file recovery has been improved.
- Interface localizations have been improved.
Bug-fixes:
- R-Studio parsed only the GPT partition table, even when it was invalid, when both LDM/MBR and LDM/GPT were present on the disk. Fixed.
- The Recover marked command was inactive if marked files were invisible due to the applied file mask. Fixed.
- The Copy information command copied the information from the previous file when the information of the selected file didn't exist. Fixed.
- The Expand All command for the folder tree may have frozen on partitions with large numbers of folders. Fixed.
- The number of marked files may have been displayed incorrectly when the view was changed from Real, by Extension, by Time, etc. Fixed.
- Sometimes R-Studio may have crashed during file recovery. Fixed.
- Sometimes the built-in previewer may have frozen when showing damaged files. Fixed.
- Scan time and progress may have been displayed incorrectly while scanning several regions. Fixed.
- Disk scan may have crashed or frozen during the process and an attempt to stop it. Fixed.
- The Rescan the entire disk command may have failed for an already scanned disk. Fixed.
- The Scan dialog didn't size units when it was closed and then opened again. Fixed.
A lot of symlink processing bugs have been fixed, two being worst:
- If there was a symlink to another folder in a place to store recovered files, and there was a folder in the data for recovery which name coincided with that symlink's folder, the recovered data was written to the symlink's folder. That may have resulted in complete loss of files stored in the symlink's folder. Fixed. Now R-Studio saves recovered files only within the path(s) specified for storing recovered files.
- When files were marked and then umarked in a folder that was a symlink, the files in its target were unmarked, too. Fixed.
- Disс information wasn't renewed when the CD was ejected and the Refresh command was executed. Fixed.
- R-Studio tried to access an attached CD/DVD drive during device refresh which may have resulted in temporal freeze. Fixed. Now R-Studio accesses a CD/DVD drive only when it works with it. Fixed.
- Disk size wasn't shown for a CD/DVD disc under WIndows NT. Fixed.
- R-Studio may have temporally frozen while switching between the Real, Extension, XXX Time views for partitions with many folders. Fixed.
- Many internal bugfixes to improve program's efficiency.
- Hexadecimal editor may have frozen while opening a multi-volume image. Fixed.
R-Studio 8.14 build 179597
New features:
- Fast search for lost partitions has been added
- Support for the ISO9660 file system used in CDs/DVDs/ISO images has been added
- Support for the UStar/Tar/CPIO/Pax file systems used in tape storage devices has been added (Technician version)
Improvements:
- Extended control over file preview has been added. Files can now be marked for recovery, recovered, etc., directly from the built-in File previewer
- Extended control and display of scanned and unscanned disk areas has been added
- A special mark has been added for a folder with marked files that are hidden by the applied mask
- A complete overhaul of symbolic and other links processing has been made
- An option to recover only marked files matching the applied file mask or all marked files has been added to the Recover dialog box
- The algorithm that estimates chances for successful file recovery has been improved
Bug-fixed:
- R-Studio parsed only the GPT partition table, even when it was invalid, when both LDM/MBR and LDM/GPT were present on the disk. Fixed
- The Recover marked command was inactive if marked files were invisible due to the applied file mask. Fixed
- The Copy information command copied the information from the previous file when the information of the selected file didn't exist. Fixed
- The Expand All command for the folder tree may have frozen on partitions with large numbers of folders. Fixed
- The number of marked files may have been displayed incorrectly when the view was changed from Real, by Extension, by Time, etc. Fixed
- Sometimes R-Studio may have crashed during file recovery. Fixed
- Sometimes the built-in previewer may have frozen when showing damaged files. Fixed
- Scan time and progress may have been displayed incorrectly while scanning several regions. Fixed
- Disk scan may have crashed or frozen during the process and an attempt to stop it. Fixed
- The Rescan the entire disk command may have failed for an already scanned disk. Fixed
- The Scan dialog didn't size units when it was closed and then opened again. Fixed
A lot of symlink processing bugs have been fixed, two being worst:
- If there was a symlink to another folder in a place to store recovered files, and there was a folder in the data for recovery which name coincided with that symlink's folder, the recovered data was written to the symlink's folder. That may have resulted in complete loss of files stored in the symlink's folder. Fixed. Now R-Studio saves recovered files only within the path(s) specified for storing recovered files.
- When files were marked and then umarked in a folder that was a symlink, the files in its target were unmarked, too. Fixed.
- Disс information wasn't renewed when the CD was ejected and the Refresh command was executed. Fixed.
- R-Studio tried to access an attached CD/DVD drive during device refresh which may have resulted in temporal freeze. Fixed. Now R-Studio accesses a CD/DVD drive only when it works with it. Fixed.
- Disk size wasn't shown for a CD/DVD disc under WIndows NT. Fixed.
- Hexadecimal editor may have frozen while opening a multi-volume image. Top
R-Studio 8.13 build 176095
- Change log not available for this version
R-Studio 8.13 build 176093
- Change log not available for this version
R-Studio 8.13 build 176051
- Change log not available for this version
R-Studio 8.13 build 176037
New features:
- Deleted partitions can be instantly found, without long scan
- Files can be recovered or marked for recovery directly from File previewer
- The number of read tries for bad sectors can be changed during a disk operation
Improvements:
- DeepSpar Disk Imager sector status data is also used to estimate the chances of successful file recovery
- FAT folders partially damaged within sectors are also enumerated
Bugfixes:
- No messages appeared in the log when a scan process was interrupted
- When R-Studio accessed data inside an already opened part of a multi-part image, a request to open this part may have appeared
- A multi-part image may have been opened incorrectly if the parts were small
- Log information may have been incorrect when recovery was interrupted
- When opening the next in turn part of a multi-part image, it was possible to click the OK button without entering the required file name. The part was lost and no more inquires were issued.
- Sometimes the program may have sent a wrong message about not enough space when the image was written to alternative paths
- The Advanced Scan dialog box may have been shown incorrectly
- R-Studio may have frozen or crashed while opening file systems
- The best copy of the FAT table for FAT12/16 file systems was determined incorrectly when it was determined sector-wise
- The path dialog box on the remote computer may have delayed for a long time if there were unaccessible connected network drives
- R-Studio may have found waste copies of GPT partitions if a GPT disk was reformatted to an LDM/MBR disk
- The program may have found some garbage GPT partition entries when those entries were re-written. Fixed. Now R-Studio checks their validity and cancels invalid r
- Partitions could not be copied to an HDD with several partition tables (i.g., a GPT table and some deleted ones)
- An extended debug file system snapshot could not be saved for disks with unsupported encryption methods
Text/hexadecimal editor:
- The offset field in the GoTo dialog box may have been shown incorrectly. Fixed.
- Strings may have been truncated on the Find Results panel. Fixed.
R-Studio 8.12 build 175721
New features:
- Support for the compression algorithms lzvn and lzfse has been added. They are used in the new HFS+/APFS versions.
Bugfixes:
- R-Studio may have crashed when creating an ext4 FS metadata image. Or it may have created it slowly. Fixed.
- R-Studio may sometimes have crashed when opening heavily corrupted file systems. Fixed.
R-Studio 8.12 build 175573
- Change log not available for this version
R-Studio 8.12 build 175481
New Features:
- Support for the APFS file system created by macOS Catalina has been added
- Support of the APFS Fusion Drive has been added
- Several paths can be immediately specified for multiple-volume images
Technician version:
- Alternative paths can be specified for places to store recovered files and images
Post Action options have been added for unattended operations:
- Automatic shutdown once lengthy operations have completed: file recovery, disk scan, and disk imaging. When this option is specified, R-Studio checks that all relevant information (scan info, RAID layouts, etc) has been saved and advanced recovery features specified
- Automatic email notification regarding operation success/failure.
Improvements:
- Search for deleted files has been improved for the Ext2/3/4 and UFS1/UFS2 file systems
- File system reconstruction has been improved for APFS partitions
R-Studio 8.11 build 175479
New features:
- Automatic recognition and assembly of complex disk manager objects whose components are also various disk manager objects. This may be useful for data recovery from various NAS devices
- Updated Windows driver that can mount R-Drive Image type (.rdr) images of hard drives, besides logical disks, as virtual hard drives in the system
Improvements:
- The Open folder when done option has been added to the Recover dialog box
- File enumeration speed has been increased by several dozen times for Ext2/3/4 and UFS1/UFS2 partitions
- Folder scan to improve folder tree reconstruction on recognized Ext2/3/4 and UFS1/UFS2 partitions
- Ext4fs extent reconstruction for large deleted files even if they are not in the file system journal
- Network data recovery speed has been increased by several dozen times
Bug-fixes:
- R-Studio may have opened some partitions with large numbers of files for a long time
- The path selection dialog box may have frozen if some network drives were connected to the system under a user account
- R-Studio may have crashed during performing recheck recovery chances
- Volume labels may have been detected incorrectly for UFS1 partitions
- Idle RAID sequences may have appeared when a custom RAID was created. Those sequences could not be deleted
- When an invalid RAID table was applied, the program didn't throw a warning
- An incorrect minimum number of RAID table lines may have appeared for RAID0 and RAID4
- The cursor may have moved incorrectly when editing the RAID table
- Unit fields (TB, GB, MB) in the RAID editor may have worked incorrectly
- The Refresh DDI command may have appeared even when the DDI device was not connected
R-Studio 8.11 build 175357
New features:
- Automatic recognition and assembly of complex disk manager objects whose components are also various disk manager objects. This may be useful for data recovery from various NAS devices.
- Updated Windows driver that can mount R-Drive Image type (.rdr) images of hard drives, besides logical disks, as virtual hard drives in the system.
Improvements:
- The Open folder when done option has been added to the Recover dialog box.
- File enumeration speed has been increased by several dozen times for Ext2/3/4 and UFS1/UFS2 partitions.
- Folder scan to improve folder tree reconstruction on recognized Ext2/3/4 and UFS1/UFS2 partitions.
- Ext4fs extent reconstruction for large deleted files even if they are not in the file system journal.
- Network data recovery speed has been increased by several dozen times.
Bug-fixes:
- R-Studio may have opened some partitions with large numbers of files for a long time. Fixed.
- The path selection dialog box may have frozen if some network drives were connected to the system under a user account. Fixed.
- R-Studio may have crashed during performing recheck recovery chances. Fixed.
- Volume labels may have been detected incorrectly for UFS1 partitions. Fixed.
- Idle RAID sequences may have appeared when a custom RAID was created. Those sequences could not be deleted. Fixed.
- When an invalid RAID table was applied, the program didn't throw a warning. Fixed.
- An incorrect minimum number of RAID table lines may have appeared for RAID0 and RAID4. Fixed.
- The cursor may have moved incorrectly when editing the RAID table. Fixed.
- Unit fields (TB, GB, MB) in the RAID editor may have worked incorrectly. Fixed.
- The Refresh DDI command may have appeared even when the DDI device was not connected. Fixed.
R-Studio 8.11 Build 175351
- Change log not available for this version
R-Studio 8.10 Build 173987
Improvements:
- LVM processing has been improved
Bugfixes:
- Empty sequences were generated in the Sequences window when the Custom RAID type was selected. Those sequences could not be deleted
- The last valid RAID block order table was saved rather than the current invalid table
- The Get Info window showed wrong file info when sorting had been changed
- Clicking an empty space on the Get Info window opened Hexadecimal editor
- Files remained marked when files were recovered with the Do not recover duplicate files from Extra Found Files option enabled
- Not all information on Overlapping files and Regions when saving file names
- The Find/Mark dialog box didn't preserve selections for the Look At Files/Folders option
- A file and folder may have the same ID on the time/extension sorting tabs. Clicking such object may have resulted in jumping to another object with the same ID. For example, to a file with an ID randomly coinciding with the ID of a folder
- Saving file names for marked files didn't save names for files with links in their paths. Only link name was saved without files in the related folder
- Some small interface and cosmetic bugs have been fixed
R-Studio 8.10 Build 173981
- Change log not available for this version
R-Studio 8.10 Build 173857
- Change log not available for this version
R-Studio 8.9 Build 173593
Bug-fixes:
- The program may have crashed when parsing damaged xattr on the UFS2 file system
- Some small internal bugfixes
R-Studio 8.9 Build 173589
New features:
- Estimation of chances for successful file recovery
- Recovery of names and paths for files deleted to Recycle Bin and Trash
- Support for ReFS 3.4 file system
Improvements:
- A complete redesign of the Find/Mark dialog box.
- The parsing and reconstruction of the FAT32 and NTFS file systems has been improved.
- The parsing of scanned APFS partitions has been improved, especially for large APFS file systems, for which the decrease of parsing time may reach several thousand times.
Bug-fixes:
- Large ext4 file systems (60+TB) may have been processed incorrectly. Fixed.
- Sometimes the program may have crashed or frozen during file enumeration and disk scan. Fixed.
- The program may have written data to network drives incorrectly. Fixed.
- Sometimes file systems on automatically created virtual RAIDs may have been created incorrectly when the RAID parents were disk images. Fixed.
更新時間：2020-10-05
更新細節：
更新時間：2020-10-04
更新細節：
What's new in this version:
Database navigator:
- View only connected data sources filter was added
- Quick search in connections/schemas options were added
- Multiple objects delete confirmation dialog was redesigned
- Tooltips visibility configuration was added in preferences
- Windows installer: shortcuts for "All Users" were fixed
SSH tunnels:
- Support for OpenSSH key format was added
- Problem with dobule password prompt was fixed
Data viewer:
- Grouping panel now supports column reordering
- Column modifier icons (key, read-only) were updated
- JSON/XML viewer performance was significantly improved
- SQL editor: toolbar buttons enablement was fixed
Data transfer:
- Native client selector was fixed
- Extra file name pattern variables were added
- Native date/timestamp format support was added to the SQL INSERTS export
- Extra formatting options were added to the SQL INSERTS format
- MySQL: user credentials of mysqldump overwrite local configuration now
SQL Server:
- SSL support was added
- Database create/drop/rename features were added
PostgreSQL:
- Interval data type DDL was improved
- Table storage parameters were added to DDL
- "Connect as role" option was added in the connection settings
- Materialized view comment edit was fixed
- Trigger comment editor was added
- Oracle: extra NLS parameters were added on the connection settings page
- Snowflake: active schema set command was fixed
- Derby: unique indexes metadata read was implemented
- SQLite: column autoincrement option support was added
- Firebird: data types information read was fixed
- Several other minor UI bugs were fixed
更新時間：2020-10-04
更新細節：
What's new in this version:
- Fixed: There could be video playback problems due to a timer change in recent builds
更新時間：2020-10-04
更新細節：
What's new in this version:
- Fixed memory leak bugs
- Supported enum dropdown
- Supported 3D 4D geometry data
- Upgrade SQLite 3 driver
- Stability improvements
更新時間：2020-10-02
更新細節：
What's new in this version:
Changed:
- Added an information message box to inform the user after DLNA is enabled during SiliconDust EPG setup, that it is a good idea to restart MC before re-attempting EPG setup
- Blocked TV recording on DMS tuners since it has not been implemented properly, to prevent crashes. Windows only. On non-Windows recording is already no-op
Fixed:
- Spelling error. On Load Program Guide window, the word "everyday" is changed to "every day".
- The program no longer pauses a playing video when clicking to activate the program from another program
更新時間：2020-10-01
更新細節：
更新時間：2020-09-29
更新細節：
更新時間：2020-09-28
更新細節：
What's new in this version:
- Added the option "Save current sentence to text file during reading aloud" (the window "Settings", the tab "Broadcasting"). It allows to display closed captions in streaming/broadcasting software
- Fixed small bugs
- Resources for Chinese (Simplified) language were updated
更新時間：2020-09-27
更新細節：
What's new in this version:
- Fixed memory leak bugs
- Supported enum dropdown
- Supported 3D 4D geometry data
- Upgrade SQLite 3 driver
- Stability improvements