Free Firewall 歷史版本列表 Page1

更新時間：2022-09-13
更新細節：

What's new in this version:

BurnInTest Professional 10.2 Build 1002
- Updated Directio64.sys with another newly Microsoft signed version to fix issues with Windows 11 22H2
- Disk test, fixed missing pattern name when a disk error was logged
- Network test, excluded received and outbound errors (low level) from the overall error total
- Fixed a case where -P command line parameter wasn't being prioritised and could still look for files in default locations
- Management console, changed behaviour to not close preferences window if API key incorrect
- Management console, changed connection error to mention checking internet connection is active
- Management console, added a link in preferences window to get a API key
- Management console, increased number of system information lines sent to a max of 50
- Management console, added icon/button to dashboard to display connection status and clicking on it will display preferences > Management tab
- Logging, stopped logging temperature sensors that weren't selected (instead of logging them as N/A)
- Logging, added which temperature sensors are selected for trace log output
- Logging, added monitor information to customer certificate
- Logging, fixed Physical Disk Read Test on the HTML Report not reporting Avg Read Speed MB/s


BurnInTest Professional 10.2 Build 1001
- Fixed a „GPGPU unable to access graphics resource“ occurring in the GPGPU test once a cycle


BurnInTest Professional 10.2 Build 1000
- Added support for API keys to connect to a cloud version of Management Console
- Scripting, updated SET2DGRAPHICS command to allow setting of per monitor test options
- 2D RAM & GPGPU test, made some changes so that the number of tests started is the lower count of available GPUs between BurnInTest's system information collection and the windows API call EnumAdapters. This should stop some issues seen with docking stations that do not respond correctly to EnumAdapters causing the GPU count to be too high, so more tests than needed are run and errors are seen
- GPGPU test, added improved recovery attempt when an error occurs during the GPGPU tests
- 2D Video memory test, reduced amount of memory being allocated for testing when running the 3D test at the same time
- 3D DX12 test, added new error message if resource files failed to load (but do exist on disk), eg in a low resource situation
- Fixed a case where when running from USB the LastUsedSettings.cfg was not loaded from the USB drive correctly and could instead use a locally installed copy or default values
- When not running tests, status messages sent to management console is reduced to once per minute, will increase when tests are being run
- Updated preferences to allow for adjusting how often status messages are sent to management console while tests are running
- Advanced network test, fixed tile numbering (x of x) while test is running and issue where all 20 result tiles were displayed instead of how many NICs were neing tested
- Advanced network test, moved the result tile title slightly to the left to match with progress tile title positioning
- Advanced Network Test, fixed last error description not displaying on tiles
- Advanced Network Test, Fixed display issue where cycles, operations and errors were not displaying on tiles
- Fixed serial port identification in WinPE for a specific add on card that was identifying them using hex A/B/C instead of numbers
- Parallel ports, fixed an instance where the parallel test would not start correctly first time if the test wasn't already selected when BurnIntest was launched
- Added a workaround for Windows 11 22H2 update that was blocking a driver load and preventing BurnInTest from gathering as much system information and seeing CPU temperatures


BurnInTest Professional 10.1 Build 1004
- Webcam test, can now be run as a pre-test or a main test. When run in main test mode the close / ok buttons will be disabled
- Preferences, added new tab for webcam options
- Scripting, added new webcam options command (SETWEBCAM)
- Fixed a bug preventing configuration files from being saved correctly
- Fixed an issue with the disk test auto select not selecting >100 disks correctly
- Fixed a crash that could occur when a log file reached its max line count and created a new file


BurnInTest Professional 10.1 Build 1003
- Test preferences, logging, added a "Show error details on certificate" option to allow for any error details to be turned off and just show "FAIL"
- Test preferences, disk, fixed an issue where auto select options were not being set properly and could leave the disk size as 0%
- Disk test, fixed several issues where >100 disks would not be displayed in the user interface correctly
- Temperature progress tile, fixed Min/Max temperatures incorrectly displaying the current temperature
- Fixed an old to new config conversion issue when the "All available" video memory test option was selected
- Fixed a possible crash when converting old configs Made some changes to fix an issue where
- BurnlnTest fails to connect to the management console, but then continually sends connection messages each status update


BurnInTest Professional 10.1 Build 1002
- Added Threads per CPU, P-Core and E-Core count to System Information tab
- Fixed incorrect "Endpoint Version not current" warning message in trace log
- Fixed missing "Threads per CPU" text in Text/HTML CPU system information output


BurnInTest Professional 10.1 Build 1001
- Fixed a config file conversion issue from V10.0 to 10.1 that could result in some setting being incorrect


BurnInTest Professional 10.1 Build 1000
- Added support for 12th gen Intel CPUs that use P (performance) and E (efficiency) cores, test threads for CPU test will be based on total available threads
- Add support for retrieving temperatures from Intel Ice Lake SP (3rd gen Xeon)
- Added support for retrieving DDR5 information
- Slightly changed RAM test memory allocation calculation to leave more free memory when running 2D and 3D tests
- Disk test, added support for up to 200 disk tests
- Preferences, fixed an issue when saving a log file without a fully resolved path (a filename with no path)
- Fixed USB version not loading settings file correctly at startup
- Added a check and specific error message if OpenCL.dll is not found on the system when trying to run the 2D - Local video memory test
- 2D Preferences, fixed window size drop down not being set correctly on initial window load
- Video Preferences, fixed Number of windows drop down not being set correctly on initial window load
- Fixed graphic flashing/redrawing issue on management console settings page caused by a no longer used icon being drawn


BurnInTest Professional 10.0 Build 1006
- Change log not available for this version


BurnInTest Professional 10.0 Build 1004
- Fixed an issue when running using a key.dat file to register BurnInTest, BurnInTest thought it was running in USB mode when it detected a key.dat and some of the file paths used (eg for pre-configured configs) could be incorrect. There is a now an additional check for running in USB mode
- Changed test selection and duty cycle dialog to show config time and cycles (if less than 15mins) when running in the trial version
- Added max run times (instead of 0 - run forever) to some of the pre-configured tests that were missing them so they work in the trial version
- Management Console, started tracking if connection was successful to prevent extra status messages being sent when connection failed for some reason
- Updated system information library to correct some incorrect CPU cache values being returned


BurnInTest Professional 10.0 Build 1003
- Updated MonitorTest to run as a registered "BurnInTest Plugin" user, will no longer launch in trial mode
- Updated KeyboardTest to run as a registered "BurnInTest Plugin" user, will no longer launch in trial mode
- Changed MonitorTest plugin test to display master screen before the touch screen tests
- After saving a result log from file menu it will now automatically open in the default viewer
- Fixed Monitor/Keyboard tests missing from results list view and Text/HTML reports
- Fixed battery window not displaying a main title, icon or runtime errors correctly when there were no batteries available
- Added webcam, battery, USB devices, RAM information to the system information section of the HTML test certificate
- Changed how optional Disk/USB speeds are reported in the HTML log & certificate, added them as part of the test name instead of in the result summary section
- Increased table sizes in HTML style logs to 800 wide
- USB test, made some changes so cycle lengths are more consistent when cycling USB3 test speeds


BurnInTest Professional 10.0 Build 1002
- Fixed test stop time being reset to 17 minutes in some cases
- 2D GPU RAM test, changed compile settings to avoid a VCTUNTIME140.DLL error
- Previous version config conversions, fixed an issue when converting config files from V8 to V9, bluetooth settings were not being copied correctly
- Previous version config conversions, attempt to convert old 2D lines and bitmaps settings for the 2D test. Other settings (EMC patterns) need to be re-chosen due to the extent of changes to the new per monitor 2D test
- Report Information, fixed "Include test duty cycles" state not being saved and restored correctly when using "Save as defaults"


BurnInTest Professional 10.0 Build 1001
- Battery test, fixed battery pre test not checking battery details correctly and throwing an error
- USB test, fixed a bug where the first USB3 test thread could stop the configuration of other USB3 plugs
- Fixed a localisation bug on progress tiles ("Low level errors" instead of "Runtime errors")


BurnInTest Professional 10.0 Build 1000
New inventory Comparison lest:
- Compares the current system information to a master list and an error is logged if there any difference
- Comparison can be done at start or end of testing
- The master list is stored as an XML file and can be created from the Inventory tab of the test preferences

New Shared Memory API:
- Added a shared memory block for API style access to BurnlnTest information, test status and temperatures
- The definitions for the shared memory structure and a demo are included in the installer

New 2D GPU RAM test:
- Replaces the Local/All available video memory test. It uses OpenCL and will allocate a large amount of the available video RAM and test it
- similar to the system RAM test
- The old test used the deprecated DirectDraw library which could not access greater than 4GB of video memory

New Pref-Configured Tests Tab:
- Added new tab to main user interface so configs can be loaded and run directly from this list. This will display config files that are saved in
- DocumentsPassMarkBurnlnTestConfigs
- Configs can now have a description and icon assigned to them which will be displayed on this tab
- Config order can be sorted by editing the cfg_order.txt file in DocumentsPassMarkBurnlnTestConfigs

New Battery Tab:
- Added a new tab to the main user interface to display a graph of the battery charge levels during testing
- Added discharge comparison rate selection
- When "main test" option is selected for battery test charge levels will be logged during testing in addition to previous behaviour of
- comparing charge level

New KeyboardTest Integration:
- Better integration of KeyboardTest, no longer have to specify a path command line flags to launch as a plugin
- Now has an individual option to enable/disable KeyboardTest in test selections and duty cycle dialog and on dashboard tab
- KeyboardTest files are now included in the BurnlnTest installer

New MonitorTest Integration:
- Better integration of MonitorTest no longer have to specify a path command line flags to launch as a plugin
- Now has an individual option to enable/disable MonitorTest in test selections and duty cycle dialog and on dashboard tab
- MonitorTest files are now included in the BurnlnTest installer

New Localisation Options:
- Added Korean and Chinese translations
- Language selection is via the new settings dialog under the "Edit" main menu item

New Settings dialog:
- Added options for language selection and default tab at startup

Dashboard:
- Added a dashboard tile for temperature with sensor names and current, min max temps
- Removed duty cycle slider from test tiles that don't have a duty cycle
- Added a "Runtime Error" count to each progress tile for quick referencing of test status
- Added left and right icons for scrolling through available test information
- Changed maximise/minimise icon

2D Test:
- Increased number of monitors supported from 4 to 8
- Changed 2D monitor tests (scrolling H, reference and colour bar patterns) to be selected on a per monitor basis and added better support
- monitors in different configurations
- 2D Test preferences, available monitors will be listed in the list box and a different test pattern can be selected for each one. Note that this
- order is not the same order as displayed by Windows by using "identify monitors" and the order can change if monitors are added,
- removed or powered off/on

CPU Test:
- Progress tile, only display decimal place when value is less than 100

Disk Test:
- Added average read/write speeds to display
- Disk wiping, added option to disk test preferences to format physical drive at end of test (only when running a physical disk test)
- At the end of testing a disk wipe dialog will be displayed with a 20 second countdown to allow it to be cancelled

GPGPU lest:
- Added a preference tab and option to avoid running the test on cards based on a name filter

USB Test:
- Progress tile, changed some text offsets so the error count was displayed on the tile
- Added "Cycle" option to speed selection to cycle between speeds (from Super Speed -> High Speed -> Full Speed)

Logging:
- Added average disk read/write speeds to logging
- Added USB benchmark read, write and loopback speed to logging
- Added option to remove system information from log

Management console:
- Added session & result IDs to log and status message on successful connection (will require an update of management console)
- Added checks for errors on status/result message updates from management console

Scripting:
- Started to remember last used script name and script path after opening a script next time "Run script" is selected
- Added scripting options for inventory, GPGPU, monitor, keyboard tests and other new config options

Tape test:
- Removed tape drive test, no longer supported

Test Preferences:
- New Config section, added options for setting a description and icon for the config (displayed on the Pre-Configured Tests tab)
- Battery, made some changes to battery settings to make it clearer and updated help with more information
- Logging, added options to save an image of the dashboard (will full screen and select the dashboard tab) at the end of the test
- Logging, added option to enable or disable logging of USB and disk speeds
- Logging, added option to remove system information from log
- Serial, removed 110 baud option. If a baud rate below 1200 is selected then the timeout value will be automatically increased to 10 seconds.
- Post test options, made some changes to "Always display result info" so that it will change the current displayed tab to the results
- dashboard. If being used in conjunction with "launch an external application and exit" then a message box will be displayed to allow the
- results dashboard to be seen (this brings it back into how it functions prior to V9 when there was an actual results window displayed at the end of testing).
- end of testing).

Test Selection and Duty Cycles:
- Added button and icons to test selection and duty cycle window to allow opening of test preferences at specific test page
- Added list of pre-configured tests on left side of dialog
- Added config description and icon to dialog
- Added temperature checkbox for consistency aid enabling/disabling the test


Misc:
- DDRS support when retrieving system information
- Support for Intel Elkhart Lake when retrieving system information
- Added a way of customising the background image for the main BurnlnTest user interface
- Added a "Don't show again" option to pre test warning, this will toggle the "Action before running tests" option for the current config to "None" if checked.
- "None" if checked.
- Removed some dynamic loading of functions from kerne132.d11 that have been around since XP SP2/Win7, now directly calling those
- functions (eg GetDiskFreeSpaceEx)
- Replaced Quick Test Menu items with Pre-Configured Tests
- Added CPU/GPU/HDD to sensor names on temperature tab
- Hid Remove/Configure columns in results list view when test was running / displaying results
- Fixed some errors not being displayed by category


BurnInTest Professional 9.2 Build 1009
- Serial Preferences, when a slow baud speed (<2400) is selected or one of the cycle options then the timeout will be set to the max value
- Serial Test, added a new error message if the serial port test was run without any serial ports selected to test in the configuration
- System information updated to recognise Windows 11


BurnInTest Professional 9.2 Build 1008
- TPM Test, made some changes to the self test for V2 TPMs which would previously fail and display "self test command blocked"
- Fixed an issue stopping system information from being written to the test log correctly when running BurnlnTest with the auto run flag -r
- Fixed an issue reading temperatures from AMD CPUs with multiple CPU groups (eg Ryzen 3990x)


BurnInTest Professional 9.2 Build 1007
Fixed:
- an issue with the parallel port test not being able to get the port address and left unable to start the test in some cases
- an issue reading AMD 4600/4800 CPU temps
- and issue preventing AMD GPU temperatures from being read if ADL_Graphics_Platform_Get failed to be loaded from ADL library


BurnInTest Professional 9.2 Build 1006
- RAM Test, made some changes to avoid a verification error being logged when the system was low on memory, in some cases a write phase was aborted due to the low memory but the verification phase would continue instead of being skipped which would lead to a verification error for some patterns. This would only occur on systems that had nearly no free RAM before the start of the RAM test. So typically only on systems with - RAM Test, made some changes when allocating/deallocating memory for the test in low memory situations, fixing a potential bug that could cause verification errors when small amounts of RAM (- RAM Test, made some changes so multiple copies of BurnInTest running the RAM test will have separate shared memory blocks, still not recommended to run multiple copies of BurnInTest at the same time however.
- 3D Test, DX12, added a check before the DX12 executable is launched if the system is going to Suspend/Hibernate and wait until system is resumed, this should prevent an error being thrown if the test stats at the same time as the system is going to sleep (seen when rapidly sleeping/resuming system in a loop)


BurnInTest Professional 9.2 Build 1005
- Audio loopback test, now supports PassMark Loopback Audio Plug
- Audio loopback test fixed an issue with the audio loopback test where if the test run time selected was 0 (run forever) then then sound playback time was too low (-1 second) instead of the expected 20 seconds.
- RAM test fixed a bug where the RAM test may only allocate 200MB of RAM for testing when run at 50% or lower duty cycle
- Fixed monitor numbers in log files starting at 0 to now start at 1
- Added GPU name used for each DX12 test to log


BurnInTest Professional 9.2 Build 1004
- Added initial support for reading temperatures from Intel 11th gen CPUs
- RAM Test, updated a trace log message when low memory is - Added a new information log message when memory is very low when trying to run the RAM test
- Disk test, fixed an issue where disks numbers being tested >80 might not show up in the log correctly

Fixed:
- an issue where disks weren't automatically selected when run in conjunction with minimising system info collection command line flag (-w) and the auto select disks preference setting
- a UI issue where if the RAM test logged an error it might not be displayed on the dashboard until the test finished
- an issue when reading temperatures from some NVMe disks
- an issue when reading temperatures from AMD CPUs


BurnInTest Professional 9.2 Build 1003
- Fixed a crash that could occur at startup when usingthe -R command line flag
- "Disk test,forced destruction of any partition information and get systenn to update partition information when running a physical disk test,this prevent an access denied error when tryingto test some physical drives that had partition information but the volumes weren't mounted"
- "Temperature graph,redrawn at end of test to display all samples"
- "Changed system information tab to show battery current charge, design and full charge capacity Made some changes to the installer so BurnlnTest won't launch after a silent install"
- "USB Test,fixed an issue with the scripting command 'USB3CONNECTIOIN ' which was not setting the chosen speed correctly for 12 or 5000"
- "USB Test,fixed a bug where USB threads were forced to stop if any plug was failing to be enumerated"
- "USB Test,fixed a case where a USB error may not be thrown at test start under some circumstances where the plug was being forced into a particular test speed (eg USB3 plug on a connection with USB2 lines disconnected)."


BurnInTest Professional 9.2 Build 1002
- Advanced network test, endpoint, fixed some possible crashes when memory failed to allocate
- Advanced network test, fixed a bug where a "connection reset by peer error" could occur when trying to test 4 or more network cards
- Added NOTEMP command line flag to disable temperature collection
- Fixed an inconsistency between BurnInTest and the Directlo driver that was causing the parallel port test to fail
- Decreased a timeout value when collecting SMART disk information that could cause the temperature initialising and collection to free or time out when some USB drives were attached to the system under test
- Fixed a possible crash when gathering SMART information from hard drives


BurnInTest Professional 9.2 Build 1001
- Fixed a bug where USB3 low level errors would display an error message for the DX12 test rather than a information line for USB3 low level errors
- Added a minimum size to the BurnInTest window so all UI elements can be accessed
- Updated system information library with initial support for AMD Ryzen 5000 Series CPU info and temperatures, support for CPU groups when retrieving per-core temperatures for Intel chipsets
- Fixed "Display errors by categories" checkbox being hidden on high DPI settings


BurnInTest Professional 9.2 Build 1000
- Rebranded "BurnInTest Pro" to "BurnInTest Windows"
- "BurnInTest Standard" has now been discontinued
- Management console, added an error when there was a server side error or response other than HTTP status 200 (eg 500)
- Endpoint, fixed a bug where the last digit of an IPV4 address from BurnInTest could be truncated in some cases resulting in a failure to start the test
- Added currently selected configuration filename to main window


BurnInTest Professional 9.1 Build 1009
- Management console, fixed a bug where unprintable characters in some system information fields (eg BIOS serial) could prevent BurnlnTest correctly connecting to the management console
- Added CPU voltage from SMBIOS to system information
- Added extra information to DX12 error logging
- Updated system information library for support for reading temperatures and SMART information for NVMe drive behind USB-NVMe bridges (eg JMicron JMS583, Realtek RTL9210, ASMedia ASM2362)
- Advanced Network Test, Added more setting value bounds checking to advanced network test preferences
- Advanced Network Test Endpoint, fixed a crash that could occur on exit while cleaning up
- Advanced Network Test Endpoint, stopped displaying an error message at startup when Bluetooth was not available
- Advanced Network Test Endpoint, fixed a crash that could occur in the endpoint
- Memory Test, fixed crash that could occur after allocating a small amount of RAM
- When using the -MF command line flag the machineid.dat file will now be saved at this location when using save as default button


BurnInTest Professional 9.1 Build 1008
- Ѕсrірtіng – Аddеd ІD flаg tо ЅЕТМАNАGЕМЕNТ соmmаnd
- Аdd mіѕѕіng mоdеl whеn dеtесtіng Іntеl Соmеt Lаkе сhірѕеtѕ fоr СРU іnfоrmаtіоn аnd tеmреrаturеѕ
- Аddеd Іntеl Ісе Lаkе сhірѕеt ѕuрроrt fоr СРU іnfоrmаtіоn аnd tеmреrаturеѕ
- Fіхеd АDМ Rуzеn tеmреrаturеѕ bеіng dіѕрlауеd tоо lоw


BurnInTest Professional 9.1 Build 1007
- RAM test, fixed an instance where the RAM test process might crash if it had allocated a very small amount of RAM initially (<100MB) and then tried to allocate more
- Management console, fixed a bug where BurnInTest might not send a test finished time in test result
- Fixed some display issues on the dashboard for the standard and advanced network tests
- Disabled time and cycle count editing in dashboard user interface and added message for trial version (was always set to 15 minutes for trial version but dashboard UI was not reflecting this)
- Fixed a recent temperature collection change that was causing some AMD CPU temps to be displayed incorrectly
- Added support for Intel Comet Lake chipset temperatures
- Added Qemu/KVM to list of known Linux VMs so that CPU MSR information is not processed (to prevent BSOD in VM)
- Replaced Testsound.wav and Testsound.mp3 example files used for sound test with cleaner sounding examples


BurnInTest Professional 9.1 Build 1006
- Change log not available for this version


BurnInTest Professional 9.1 Build 1005
- Change log not available for this version


BurnInTest Professional 9.1 Build 1004
- Sound test, Loopback test, fixed a possible crash that could occur if there was no input device available
- Management console, fixed an issue where a connect message wasn't correctly sent when a large amount of system information was present (eg 10+ disks etc)
- Fixed a bug where some event source strings were not printed correctly (only a single character) to the trace log
- Fixed the display of hard disk information only showing minimal information (no serial etc) in WindowsPE
- Updated system information library with some AMD Ryzen temperature fixes (4600H, 4800H)


BurnInTest Professional 9.1 Build 1003
- Scripting, fixed an issue where script would continue running next script line when STOP button was clicked
- Disk test, fixed an instance where disk test files were not being kept on disk when used in conjunction with the -K command line parameter
- Slightly increased test tile size to allow for extra USB information being displayed
- Install to USB, now includes machineid.dat if file exists
- USB test, added the "Check bus error" option to the preferences window to allow user to enable/disable logging of the low level errors. "Low level errors" information field added to USB test display


BurnInTest Professional 9.1 Build 1002
- Memory Test, fixed a crash / timeout error that could occur in low memory situations
- Added some extra logging to trace file with command line string
- Added some extra error information when Print action fails


BurnInTest Professional 9.1 Build 1001
- Fixed missing digital signatures on some executables (plugins, memtest, DX12 test) which could prevent the executables being launched by BurnInTest or show an unknown error during the memory test


BurnInTest Professional 9.1 Build 1000
- Memory Test, made some changes to how the memory is allocated at the start of the test and reallocated during the test. Previously memory was allocated in one large allocation (per memory test process), however on systems with large amount of RAM (eg 4TB) the test would time out when test RAM was reallocated. Now the test processes will allocate/deallocate RAM in 100MB blocks
- Memory Test, added a small sleep if a memory allocation fails before looping to try allcIte again
- CPU Test, started reserving threads if memory test is running (1 thread for 8 or less cores*thread systems, 2 threads for > 8)
- Scripting, fixed some issues where the next line of a script might not be executed when a test was automatically stopped when using the SETERRORS ACTION STOP command
- 3D Test, fixed a bug where last 3D DX12 error string was not being displayed in dashboard list view


BurnInTest Professional 9.0 Build 1018
- Management console, started sending more memory information to management console on initial connection so RAM details table can be populated from BurnlnTest connections
- Plugins, fixed an issue where the test run wouldn't automatically stop when running just plugins (no main tests included) and the plugins had finished
- Plugins, fixed an issue where the next ugin wouldn't start when running plugins during the main tests (not pre-test plugins) and the option "run each separately" was selected
- 2D EMC testing, added new option to swap pattern displayed on primary monitor • 2D EMC testing, added an option to disable the sine wave tone that is played during the test
- 2D EMC testing, fixed an issue when the primary monitor was not the left most (#0) monitor that would cause the test to display on the wrong monitor and in incorrect sizes
- Fixed an issue where DirectlO.sys could be held open if BurnlnTest was started a second time on the same system if temperature monitoring was enabled. This could then cause system information to not be collected correctly (eg missing memory details) on the second BurnlnTest launch (if system was not restarted between launches)


BurnInTest Professional 9.0 Build 1017
- Disk test, added some extra checks that block size is not invalid when starting the test
- 3D Test, changed default test size to 800x600
- 3D Test, DX12 test, made some changes so test window can be moved to a different screen location
- Management console, made some changes so that clearing the Machine ID in the report information dialog will close the current management console connection and allow the config (or the default values in machineid.dat) to be saved with a blank Machine ID. This will then be newly generated next time BurnlnTest is opened using that config and the connection to the management console is made.
- Memory test, made some changes so the test isn't waiting longer than it needs to when running in conjunction with USB2 plugs or the USB test has errors before connecting to a plug (the memory test will wait for up to 1 minute before starting to allow USB plugs to connect and the USB3 benchmark test to run)
- CPU Test, added option to allow number of CPU test threads to be chosen Added a warning message when running the 3D DX12 test in conjunction with the GPGPU and CPU test at high duty cycles
- Logging, added duty cycle for the selected tests to the normal log output
- Fixed a crash on start up that could occur on Intel Baytrail systems due to an invalid MSR read


BurnInTest Professional 9.0 Build 1016
- Change log not available for this version


BurnInTest Professional 9.0 Build 1015
- Made a change to the 3D DX12 test to remove a timer watching for completion of the test, this timer could cause an error to occur if the system was put to sleep and then resumed. Now the background watchdog timer (that checks the operations count of a test continues to increase) will be used to detect if there is an issue running the 3D test
- Fixed a buffer overflow issue that could cause a crash in the cpu max heat test
- Changed behaviour of memory test when it generates an “unknown error”


BurnInTest Professional 9.0 Build 1014
- Change log not available for this version


BurnInTest Professional 9.0 Build 1013
- Added some test information to the display of the 3D test progress tile on the dashboard
- Network test, added extra output to trace level 1 log each cycle (500 packets) for standard network test (packets sent / recv, bytes sent, max / avg delay, total bad packets)
- Fixed a bug where a new test could be added using the "Test Selection and & Duty Cycles" menu item when the test results were being displayed, leading to a new test tile with no result (which could appear as a blank space on the tile view)
- Added a warning message and option to clear results when attempting to use the "Test Selection and & Duty Cycles" menu item when in a "Results" test state
- Made a change to detect USB drives better when auto selecting disk test options
- Fixed a crash that could occur in the 32bit build when trying to use the duty cycle slider for a test on the dashboard tab
- Management console, now when technician or customer is changed in the report details any current connection to the management console will be restarted so the changes are sent to the management console
- Fixed a bug in the DirectX12 3D test that could cause a "Test was interrupted" error message when BurnInTest attempts to resize/move the test window after initial creation
- Fixed temperature display for Ryzen 2700 PRO


BurnInTest Professional 9.0 Build 1012
- Added outputting of PCIe statistics to trace activity level 1 log once per cycle
- Fixed a bug where saved report defaults (technician, customer, serial etc) could be cleared when the current results were cleared
- Made a change to the CPU heat test so that the SSE2 heat test checks for AVX CPU support as well as some AVX instructions being used (which caused a crash on old CPUs like the Core 2 Quad 6600)
- Fixed an issue with the TPM test where V2 TPMs might not be found correctly and throw a "self test failed" error
- Added a new error to the TPM test if the self test command is blocked by the operating system
- Fixed an issue in the DX12 3D test where if an error occurred during the render process it previously might not be displayed until the 3D cycle finished. Now an error will be flagged when the error occurs and the test will stop running.
- Changed behaviour of scrolling letter 2D test so it will continue to run when not in the foreground
- Added technician and customer details to management console connection message
- Changed editing of report details so when technician or customer is changed any current connection to the management console will be restarted (starting a new management console session)
- Increased size limit of system information details fields sent to management console
- Increased number of system information items sent to the management console from 16 to 25
- Fixed some possible array overflows that could cause a crash when generating the management console connection message
- Started signing installer with SHA256


BurnInTest Professional 9.0 Build 1011
- Fixed a crash that could occur when using a config file from version 8
- Updated system information library to work around a crash caused by Windows 10 Enterprise device guard on some AMD systems


BurnInTest Professional 9.0 Build 1010
- Fixed a bug in the 2D colour bar test that was preventing the main BurnInTest windows from handling messages (eg when clicking the stop button) which made it impossible to stop the test.
- Removed the verified operations count for the GPGPU as it was unused, added an error count to the dashboard tile
- Fixed a bug preventing bitaccess.txt from correctly working with the test selections, times and cycles on the dashboard display
- Fixed a bug preventing bitaccess.txt working with the TPM test
- Made some changes so invalid filename characters are stripped from the log file prefix name when using system variables replacements


BurnInTest Professional 9.0 Build 1008
- Fixed an issue when reading the configuration file that could cause the "Machine type" and "Serial number" to display invalid characters in system information


BurnInTest Professional 9.0 Build 1007
- Made some changes to the advanced network test in order to run a bit slower and allow smaller target speeds on low speed network cards
- Fixed some display issues with the advanced network test dashboard tile view
- Updated system information library to fix some issues when reading Intel SSD temperatures
- Added some extra TPM error messages
- Fixed an issue with the PHYSDISK command line parameter and the auto select disks setting when running in WinPE not correctly selecting all the physical disks
- Fixed a bug where if just a pre test was selected (eg the TPM test) then it was possible for the test run to not stop correctly after the pre test was finished
- Fixed a minor bug in calculation of the Cycle in the USB3 test
- Changed the packet count per cycle of the USB3 test to 115,000 to bring the cycle count more into line with the USB2 cycle count


BurnInTest Professional 9.0 Build 1006
- Changed behaviour so when using a script from the command line the management console connection is delayed until a config (with the management console enabled) is loaded or the SETMANAGEMENT script option is used
- Fixed a crash that could occur when turning on the management console option using a script
- Removed IP information for network cards from test certificate
- Install to USB, added window message updates when copying big files to prevent "Window not responding"
- Install to USB, added LasUsed.bitcfg file to USB drive during copy process
- Fixed a 32bit overflow when logging the offset location of an error in the Optical test that could cause negative values to be displayed for large files
- Added an error message when the DX12 test executable is missing / fails to launch
- Fixed the display of the number of USB tests running on the test progress tile (previously showing an incorrect number of tests running).
- Temperature graphing, added checks and fixes for graphing more than the maximum # of temperature sources (32)
- Fixed a bug where selecting "No Monitoring" for temperature monitoring in test preferences could lead to a crash


BurnInTest Professional 9.0 Build 1005
- Added logging of DX12 error string when available
- Changed time/duty cycle entry on dashboard so values are saved when losing focus, not just on enter keypress
- Changed default network test settings to be error ratio of 0.1% instead of each single missing packet
- Made the test preferences dialog a bit smaller
- Added AVX/AVX2/FMA3/FMA4 settings to SETCPU script command
- Fixed a bug in the CPU test where if just the AVX/AVX2/FMA3/FMA4 instructions were selected then the test would not perform any operations
- Fixed a bug in the endpoint.exe (advanced network test) not updating the current ethernet statistics while a test was running
- Fixed incorrect logging test name for TPM
- Fixed a bug when removing advanced network test from tileview, would still be present in list view on dashboard
- Fixed a bug when trying to remove the advanced network test using the remove link in list view on dashboard
- Fixed a bug with the text not drawing correctly for the Advanced network test dashboard tile when a test was running


BurnInTest Professional 9.0 Build 1004
- Fixed a bug with the DX12 test losing it's operations and cycle count after 15mins
- Fixed a possible "No operations" error for the DX12 test
- Fixed a bug with Advanced network, PCIE and serial port tests not updating operations count when dashboard tab was not displayed, which could cause a "No operations detected" error message.
- New in BurnInTest Professional 9.0 Build 1003 (March 23rd, 2018)
- Changes to the PCIe test for handling sleep states during testing
- Fixed a bug that could cause tests to end before their set runtime
- New in BurnInTest Professional 9.0 Build 1002 (March 20th, 2018)
- Fixed a bug with "Install to usb" function not copying the required DX12 3D test media files
- Fixed a bug where if all tests had finished (eg in an error condition) before clicking stop button then BurnInTest could get stuck and not allow tests to be stopped properly


BurnInTest Professional 9.0 Build 1001
- Fixed some incorrect test icons on the dashboard
- Fixed a bug where times were not being sent correctly to the management console while a test was running
- Increased max script line length to account for setting the maximum number of supported serial ports for SETSERIALPORTS command
- Temperature, Fixed auto scroll checkbox not being applied when temperature settings are changed
- Temperature, Fixed overlay text appearing outside graph area
- Temperature, Fixed flickering of lines when auto scroll is disabled
- Temperature, Fixed incorrect temperature time values in chart due to temperature history wrapping back to 0


BurnInTest Professional 9.0.1000.0
New User Interface:
- New tile based user interface
- Tests will now run on top of their tile button un user interface (instead of a separate window) where appropriate
- Better scaling of user interface on 4K high DPI monitors
- New TPM (trusted platform module) pre test
- Checks for presence of TPM, runs self test and queries for version.

CPU Test:
- Added AVX, AVX2, FMA3 and FMA4 extensions
- Added checkbox for AVX, AVX2, FMA3 and FMA4 to test preferences
- Heat test, added new instructions to max heat test to maximize heat generation on CPUs that support FMA & AVX instruction sets

RAM Test:
- Improved the speed of the test by enabling memory caching. To replicate the V8 behaviour an option has been added to the test preferences to "Disable memory caching"
- Test now waits for USB3 benchmark test phase to complete before starting due to the large amount of RAM required per USB3 plug during the initial benchmark phase of the USB3 test.

Bluetooth Test:
- Updated and improved Bluetooth test
- NEW Bluetooth Advance Loopback Test to send/receive with the current Endpoint Software.
- Added Loopback test for Serial Bluetooth Devices (Tested with HC-06, Power to VCC, Ground to Ground, RX looped to TX). Requires the device to be paired/authenticated prior to be used in BurnInTest
- Bluetooth Loopback Test now supports up to 4 Remote Bluetooth devices.
- Added separate Duty cycle and preferences controls for Bluetooth test
- Added port range to Bluetooth test

2D Test:
- Added new EMC test pattern "Color bars with moving element", to comply with CISPR 32 (ITU BT.1729) standards
- Changed how example character is drawn on preferences window to better display large fonts (96, 120 etc)
- Removed font size limit (previously 8-16) on scrolling letter 2D tests
- Allowed different font sizes to be selected for the scrolling H test and adjusted the scroll speed to take into account monitor vertical resolution
- Added 2K & 4K resolution options

3D Test:
- Added new DX12 option on supported systems (64bit win 10)
- Added 2K & 4K resolution options

USB3 Test:
- Added slow speed threshold setting and warning message to USB3 loopback test
- Added a warning/error when USB3 plugs are not running at superspeed / 5Gb USB3 speed. This can be ignored by changing the BITErrorClassification.txt file
- Added ability to select USB3 plug connection speed for USB test
- Added memory allocation check when creating packet buffers for USB3 benchmark & loopback tests
- Increased usb3 thread synchronization timeout from 1 minute to 2 minutes to avoid synchronization timeout when multiple usb3 plugs (more than 4 plugs) are connected.
- Added a syncronization step before reading voltage from usb3 plugs
- Fixed a bug where sending simultaneous usb3 vendor commands could lead to failure in running the commands
- Added "Auto" option to the USB3 connection types
- Improved thread synchronisation when a large number of test plugs are connected. Many USB host controller's device drivers start to fail under high load (Open, Send and Re-enumeration requests fail if system is under high load). This works around most of the host controller flaws.

Disk Test:
- Increased disk tests limit to 100 (from 80)
- Added a "max cycle" option to the disk test

Network test:
- Added "Use 1st IP for all" network test option to preferences
- Added a new option to only select network cards that are connected/have an IP

Video Test:
- Added option to mute audio when playing video

Serial Port test:
- Added separate options to disable RTS/CTS and DSR/DTR test phase

Help:
- Moved to a new help format (ewriter) so that help topics can be opened directly in Windows 10
- Temperature Monitoring & Charts
- Updated temperature graphs to be interactive and allow scrolling and zooming.
- Temperature collection and graphing will start by default when BurnInTest is first launched so temperatures can be monitored without any tests running. On test start the graph will be reset and on test stop the temperature monitoring will be stopped to allow the graph from the test run to be saved.
- Temperature tab now has a split list view of three lists, CPU, GPU and HDD
- Changed series colours to be more visually friendly
- Added checks for the maximum number of temperature sources to monitor
- Fixed scrolling/dragging issues
- Added zoom buttons
- Added support for multiple GPU temperature readings
- Customer certificate template
- Added marker for inclusion of the temperature table chart

Scripting:
- Added more USB options to scripting
- Added SETBLUETOOTH Scripting commands

Misc:
- Added support for reading and logging fan speed from SpeedFan utility
- Fixed a bug when using the PHYSDISK command line parameter in WinPE where the physical specific disk patterns were not available in the select all drop down
- Fixed some problems displaying the FMA3 support for CPUs in system information
- Added way to disable stop button, disable time and cycle settings when using bitaccess.txt to prevent people changing the run time and stopping test early
- Added option to include the duty cycle of each test in the Report Information window
- Turned optical test off by default
- Removed GPGPU test from standard edition

Preferences
- Increased the size of Preferences window
- Changed temperature source/threshold combo boxes to editable list view with checkboxes
- Combined Pre-Test/Post-Test tabs. Combined Serial Port/Parallel Port tabs
- Added %MCMACHINEID% flag to logging file name preferences to allow management console ID to be used as part of the logging path
- Made some changes to the memory test preferences window tab for better readability
- Management console
- Updated & rewrote central management console database to hold testing results

更新時間：2022-09-13
更新細節：

What's new in this version:

Free Firewall 2.6.2 (64-bit)
- Change log not available for this version


Free Firewall 2.6.1 (64-bit)
- Change log not available for this version


Free Firewall 2.6.0 (64-bit)
New features and improvements:
- Big UI changes
- Windows kernel can now be released for network traffic
- Process monitor can be configured

Changes and fixes:
- Changes to the firewall rules are sometimes not adopted
- Applications launched from a network path could not be shared
- Antivirus programs could not get updates


Free Firewall 2.5.8 (64-bit)
- Additional translation: Polish


Free Firewall 2.5.7 (64-bit)
New features and improvements:
- The installation wizard can now also uninstall the software
- Minor changes to the user interface


Free Firewall 2.5.6 (64-bit)
New features and improvements:
- Cleaning up old program entries now shows the total number of removed entries
- Support for Windows Subsystem for Linux (WSL)
- Entries in the event list are highlighted in color
- Various enhancements to the user interface

Changes and fixes:
- Navigation menu decreased when a menu item was selected
- Tray menu in the notification area was sometimes not displayed
- Programs with internet access sometimes appeared in the program list with a delay


Free Firewall 2.5.5 (64-bit)
New features and improvements:
- Revision of the translation: Spanish

Changes and fixes:
- Unassigned events were displayed repeatedly
- The window was not minimized during the automatic start


Free Firewall 2.5.4 (64-bit)
New features and improvements:
- Revision of the translation: Spanish

Changes and fixes:
- The window was not minimized during the automatic start


Free Firewall 2.5.3 (64-bit)
New features and improvements:
- Reduced CPU utilization
- Improved cleanup after uninstallation
- New function: Password protection when starting FreeFirewall
- New translation: Turkish
- Chinese translation revised
- Changes in the language are now accepted immediately without restarting
- Reduced CPU utilization
- The number of alarms has been reduced

Changes and fixes:
- Export works again
- Sporadically, some applications were blocked without being able to be released


Free Firewall 2.5.2 (64-bit)
- Reduced CPU utilization


Free Firewall 2.5.1 (64-bit)
- 1621/5000
- New features and improvements
- New: Three firewall modes: Normal, Gaming, Blockade
- New Mode: Blockade: Network traffic is blocked for all programs and services.
- New Mode: Gaming: All notifications are disabled and games get network access.
- New translations: Dutch.
- New translations: Czech.
- Applications can now be added to the list itself.
- Window position is saved and loaded.
- Bernuzteroberfläche revised.
- Additional manual update search by button.
- Software and processes run more stable.
- Icon in the info area (tray) flashes on events.
- Icon in the info area (tray) shows different icons for each firewall mode.
- The sorting of the lists is stored across sessions.
- Revised context menu for applications
- Right click context menu for applications
- New functions in the context menu for applications: start program, copy path to the clipboard, open directory
- New: Temporary rules. Rules are reset after the next reboot.
- New: Ignore events. In the event list and in the event window.
- Lists of events can be sorted.
- Applications can be shown and hidden in the list.
- Lower memory consumption.
- Translated translations.
- Changes and fixes
- Bug fixed in sorting list by rule.
- List of events was not updated automatically as events were processed in the event window.
- Firewall rules were not correctly adopted sporadically.
- Send feedback
- History
- Saved
- Community


Free Firewall 2.5.0 (64-bit)
New features and improvements:
- New: Three firewall modes: Normal, Gaming, Blockad
- New Mode: Blockade: Network traffic is blocked for all programs and services
- New Mode: Gaming: All notifications are disabled and games get network access
- New translations: Dutch
- New translations: Czech
- Applications can now be added to the list itself
- Window position is saved and loaded
- Bernuzteroberfläche revised
- Additional manual update search by button
- Software and processes run more stable
- Icon in the info area (tray) flashes on events
- Icon in the info area (tray) shows different icons for each firewall mode
- The sorting of the lists is stored across sessions
- Revised context menu for applications
- Right click context menu for applications
- New functions in the context menu for applications: start program, copy path to the clipboard, open directory
- New: Temporary rules. Rules are reset after the next reboot
- New: Ignore events. In the event list and in the event window
- Lists of events can be sorted
- Applications can be shown and hidden in the list
- Lower memory consumption

Changes and fixes:
-Bug fixed in sorting list by rule
-List of events was not updated automatically as events were processed in the event window
-Firewall rules were not correctly adopted sporadically
- Send feedback
- History
- Saved
- Community


Free Firewall 2.4.3 (64-bit)
- New features and improvements
- New translations: Russian
- New translations: Italian
- New option: Clicking on the FreeFirewall icon in the notification area opens the event window
- Changes and fixes
- Option to remove obsolete entries did not work sporadically


Free Firewall 2.4.2 (64-bit)
- Change log not available for this version


Free Firewall 2.4.1 (64-bit)
- The software now has a digital signature so that no alerts about unknown publishers appear when the software starts


Free Firewall 2.4.0 (64-bit)

New features and improvements:
- New option: Sound playback on events
- Minor adjustments and enhancements to the user interface

Changes and fixes:
- Icons were not displayed in the list after restart
- Sporadically, alarms and events were not displayed
- Exporting settings did not work


Free Firewall 2.3.0 (64-bit)

New features and improvements:
- New translations: French, Spanish, Chinese

Changes and fixes:
- Corrected display errors in the user interface
- Corrected memory leak in firewall service
- Last rule, in selected zones, was not implemented correctly


Free Firewall 2.2.1 (64-bit)

New features and improvements:
- Filter function changed: Instead of filtering entries based on a string, the specified keywords are searched in the list
- New commands in the event overview: Allow or forbid all events

Changes and fixes:
- Zones could not be deleted
- Event window was not displayed in the previous version


Free Firewall 2.2.0 (64-bit)

New features and improvements:
- Display a program icon in the notification area
- New option: Firewall shrinks when closing in the notification area
- New menu in the notification area
- New Commands in Event Summary: Allow or Disallow All Events
- Firewall user interface starts faster
- New command: Delete filter
- AntiVirus software no longer blocks firewall startup

Changes and fixes:
- Fixed various graphical display errors
- Complete translation into English


Free Firewall 2.1.0 (64-bit)
- Change log not available for this version


Free Firewall 1.4.9.17123 (64-bit)
- Change log not available for this version


Free Firewall 1.4.8.17080 (64-bit)

Innovations:
- Translation in russian, korean and brazilian portuguese

Changes and fixes:
- Small acceleration of displaying notifications
- Error in starting the firewall on Windows 7 SP0
- Translations were not displayed correctly
- Bugfix of connection to the firewall failed error


Free Firewall 1.4.7.17046 (64-bit)
- Bugfix of connection to the firewall failed error


Free Firewall 1.4.6.17044 (64-bit)
- Translations were not displayed correctly


Free Firewall 1.4.5.17042 (64-bit)

Innovations:
- Translation in russian, korean and brazilian portuguese

Changes and fixes:
- Small acceleration of displaying notifications
- Error in starting the firewall on Windows 7 SP0


Free Firewall 1.4.3.17037 (64-bit)
- Changes and fixes: Error in starting the firewall on Windows 7 SP0


Free Firewall 1.4.1.16317 (64-bit)
- Speed up the display of notifications


Free Firewall 1.4.0.16316 (64-bit)

Innovations:
- Translation in russian, korean and brazilian portuguese


Free Firewall 1.3.2.16313 (64-bit)
- Change log not available for this version


Free Firewall 1.3.2.16283 (64-bit)
- Some applications become unstable and crashed through the Firewall
- New digital signature of the binary files


Free Firewall 1.3.0.16229 (64-bit)
- Translation into Portuguese

更新時間：2021-11-22
更新細節：

What's new in this version:

Mobirise 5.5.2
- Change log not available for this version


Mobirise 5.5.0
- Change log not available for this version


Mobirise 5.4.0
Themes:
- M5 themes are available. These themes are based on Bootstrap 5. M4 and M5 themes are compatible
- The Mobirise 5 theme is now based on Bootstrap 5

App:
- Migration to Bootstrap 5: changes in plugins (most plugins don't use jQuery now)
- Plugins are added now when you add blocks from other themes (fix)
- Page Templates: the new panel where you can select a template when you create your project


Mobirise 5.3.10
App:
- Default app language is set to English
- Links with the quotes characters fixed
- Added support for IDN urls in the "Link to" window
- SFTP Publishing method updated
- Now you can send a detailed crash report if your project cannot be saved
- Publication process optimized. Fixed publishing huge projects.

Extensions:
- AMP themes: youtu.be links supported in video blocks


Mobirise 5.3.9
- Change log not available for this version


Mobirise 5.3.5
Core:
- Engine improved. Now the app should work faster

Interface:
- Blockpack blocks are not shown in the main list of blocks. You can still access them via Search or the "More Blocks" button
- Blocks in themes are sorted. Now you can add blocks from other themes. Search needed blocks via the More buttons or the Search field

Fixes:
- Adding blocks: the error with adding broken blocks fixed
- Fonts issues fixed
- Item Wizard issue fixed for sliders
- Code Editor: placeholders for scripts are shown now
- Code Editor: fixes for old projects (M3 themes)


Mobirise 5.3.0
Design:
- New loader look
- Scrollbar styling added

Mobirise:
- Added dark inline editor panel in the dark mode

Mobirise:
Sites management:
- Now you can create sites based on a template from another theme
- Sites panel - search by name & domain added
- Create New Site panel - newest themes shown on top of the list
- Search through all templates when adding a new page: go to Pages and click Create New Page to see the list of available templates

Mobirise:
- Drag Block to Page panel
- Search through all Mobirise blocks

Mobirise:
- Added Show More buttons at the end of each blocks' group

Mobirise:
- Updated block groups (added new block groups, renamed and sorted the old ones) for free Mobirise themes
- Added shadows to the show more blocks button on hover
- Added new blocks categories to default themes, fixed the search for similar blocks

Domain connection:
- Updated DNS records: new DNS record types available
- Connecting domain via CNAME record added

Extensions panel:
- Added Add All button

Mobirise:
Code Editor:
- Highlight matching tags in HTML

Mobirise:
Icons:
- SVG icons instead of iconfont files in pages to improve loading speed

Other updates:
- Improved loading speed of user sites by optimized connection of Google Fonts
- If there is something wrong with the project code, you'll see a note about an issue

Themes:
Mobirise 5:
- Added compatibility with the Form Builder extension
- Fixes for alignment on mobile devices
- Fixes for logo images in the navbar
- Fixed the scroll-to-top arrow on mobile view
- Added paddings to the logo in the menu
- Socicon plugin font now supports "font-display: swap" for better optimization
- Fixed menu brand name underline
- New block categories

AudioM4:
- Features 3, 4, 6: Changed background images to usual img, to have an opportunity to insert link on image
- Features 4, 6: Added the ability to disable swinging and glare animation
- Added square cards option (square music album covers are the industry standard)
- Added range parameter to change size of cover
- Added buttons option (if all animation is enabled, there may be problems with following the link in the image, despite the accepted changes)

LuxuryM4:
- Fixed incompatibility issues with Mobirise 5
- Fixed broken logos in the menu
- Aligning pictures in team2
- Moving the send button in form1 and form3, an extra once global attributes in form 2

BusinessM4:
- Fixed images in Clients1
- Renamed all images in clients-white folder, to avoid intersections with images from clients folder after publication or preview

TherapyM4:
- Fixed team2 uneditable card content
- Added pointer-events rules, to be able to edit the text and link that appear on image hover

KidsM4:
- Fixes for options for menu background & text color option on mobile

ConnectM4:
- Reduced resolution to upscale the font-size from 1200 to 1199px and 992 to 991px

KidsM4 & AgencyM4:
- Fixed incompatibility issues with Mobirise 5, fixed the codestyle and menu, added theme classes

LightAMP:
- Fixed bugs in menus

Fixed:
- Github publishing method fixed
- Fixed and updated DNS records: new DNS record types available
- Extensions panel - fixed the search
- Fixed the position for the custom HTML block
- Fixes for the theme installation when choosing an unavailable theme
- App Settings - fixed saving Remove Mobirise from HTML setting
- Link-editor: fixed shop links in AMP themes
- Fixes for the fonts connection issue


Mobirise 5.2.0
Core:
- Bootstrap version updated in the app to 4.5.2
- Electron version updated in the app to v10

Interface:
- New Blocks Menu panel. Browse through blocks more conveniently due to the enlarged page view
- Spellchecker: check and correct mistakes directly in the app
- Add Blocks List: all compatible blocks are available w/o theme reloading and user blocks. Select a compatible theme to see a blocks list
- Pages List: Search available
- You can download all the extensions available for you. Open the Extensions list and press Ctrl+Shift+A
- Don't show again option for remove block, create site and open site dialogs.
- Updated Remove Unused Images
- Faster Sites panel

Mobirise 5 theme:
- Ghost Button Border option in Site Styles
- 5 new blocks - headers and footers
- Logo Size option for footers
- Fixes in some block designs
- Fix with tab anchor renaming
- Duplicated code and CSS removed
- Some fixes in block designs

Fixes:
- Fix in Code Editor "click twice to save"
- Fix for "Social Sharing Image"
- Fix for sorting blocks
- Google maps fix
- Code syntax verification fix in Code Editor
- Fix for custom HTML in M3


Mobirise 5.1.4
- Change log not available for this version


Mobirise 5.0.29
- Change log not available for this version


Mobirise 5.0.28
Core:
- Brand-new engine. The app is upto 2 time faster, especially on large projects
- Bootstrap version updated in the app to 4.5.0
- jQuery version updated in the app to v3.5.1
- Themes can be added faster (the app is not reloading if the theme is not current)

Interface:
- Light/Dark mode. The Light mode is enabled by default in the app now. But if it's more comfortable for your to use the dark mode, open app settings (Menu -> Account -> App Settings -> Editor -> Dark Mode)
- The "Remove Unused Images" button added in Site Library.
- Sites published on Mobirise servers are shown in the Sites list now. If you remove them, they will not be available online anymore
- New Sites panel available in the app. Now it's in a full-screen mode
- Image Editor: New function in Image Editor: Rotate
- Favicon and page name are shown in navbar
- Canvas with borders. You can disable this feature in your app settings (Menu -> Account -> App Settings -> Editor -> Fullscreen Canvas)
- You can connect your site domain with the site published via the Mobirise Publish option. Find this feature in your Site Settings after publishing your site

Fixed:
- Saving user blocks is fixed
- AMP Cache issue fixed. Earlier some of our users faced some issues with AMP blocks: galleries, sliders, accordions were not usable because of saved cached files. There was no simple way to clear the cache folder. This issue is fixed now.
- Sliders and Galleries optimized in the app. This fix may not affect already created galleries, but new galleries and sliders should work faster
- Mobirise 4 Theme: youtu.be links are supported, forms are cleared after submitting, gallery and form fixes
- MobiriseAMP Theme: update menu, fixed 'scroll to top button'
- Issue with $ symbols cleared is fixed
- Parallax fixes
- Link Editor: WhatsApp link fixed
- Form Builder fixes
- Google Maps fixed

Extensions:
- Code Editor: Global HTML Insert available in Site Settings. You can add the HTML lang tag in it and add code snippets to the various parts of your pages. Since this feature is global, your code will be added to all pages in your project
- New default theme available in the app: Mobirise 5. Start a new project and select the Mobirise 5 theme to check it


Mobirise 4.12.4
- Change log not available for this version


Mobirise 4.12.3
- LazyLoad Extension fixes
- Social Icons are updated
- Form Builder Small fixes
- youtube links are supported now
- Fixed saving the Resize Images site setting
- Minor fixes


Mobirise 4.12.2
- Change log not available for this version


Mobirise 4.12.0
- Change log not available for this version


Mobirise 4.11.6
- Change log not available for this version


Mobirise 4.11.5
- Issue with images in AMP themes fixed
- M4 themes are updates with fixes for gallery and shop block filters


Mobirise 4.11.4
- Change log not available for this version


Mobirise 4.11.3
- Update of Code Editor extension. New features: Edit Block Anchor, Edit Site Styles
- Edit user block name
- Choose a Social sharing image
- New Site Settings interface
- Fixed saving Site Styles
- Fixed publish Popup Builder on several pages in amp themes
- Fixed captcha

Mobirise4 theme:
- fixed gallery styles
- fixed line height


Mobirise 4.11.2
- Change log not available for this version


Mobirise 4.10.10
- Change log not available for this version


Mobirise 4.10.8
- Change log not available for this version


Mobirise 4.10.7
- Mobirise AMP: new slider block with bullets, new manager for galleries and sliders, you can select the link type now: to full screen image or to your link
- Page Settings: preview of your page in Google Search
- Remove unused CSS for AMP: fixes
- Batch adding images to gallery: fixes
- Mobirise Publish: now you can publish sites made in M themes
- Fixes for shop blocks


Mobirise 4.10.5
- Link Editor updated: messenger link types are added
- New thumbnails for extensions, the Create New Site dialog is updated
- Image crop feature updated, fixed for jpg images
- Fixed disappearing parameter buttons in top right corner of block
- Minor fixes for Mobirise4
- Fix update style of global component
- Extensions: o PayPal Shopping Cart is updated: new look o TechM4: new blocks, update foran accordion block


Mobirise 4.10.3
- Change log not available for this version


Mobirise 4.10.2
- Change log not available for this version


Mobirise 4.10.1
- Change log not available for this version


Mobirise 4.10.0
- Change log not available for this version


Mobirise 4.9.7
- Change log not available for this version


Mobirise 4.9.6
- New "Add Block" panel: now with block categories
- Online Image Library: enlarged preview on hover
- Updated Mobirise4 and MobiriseAMP themes: fixes, new blocks
- Code Editor: fixed inserting scripts to custom HTML block
- Fix for menus (scroll-line on mobile view)
- Fixed tags in image galleries


Mobirise 4.9.5
- Change log not available for this version


Mobirise 4.9.4
- Change log not available for this version


Mobirise 4.9.3
- 'Update All' button for extensions with a progress bar
- Adding images by drag and drop in Image Media
- Adding multiple images at once to sliders and galleries (non-AMP themes)
- Updated M4 themes to latest Bootstrap v4.2.1
- Updated free MobiriseAMP theme - 20 new blocks: gallery, slider, accordion, contact forms, testimonials, google maps.
- Code Editor loading speed improved
- Bug fixes for Google Maps
- Fixes for editing menu colors
- Fixe with page cloning


Mobirise 4.9.1

Code Editor update:
- Mobirise mentions removal - clear the HTML code from "made with Mobirise" etc.
- New color schemes - light and contrast
- Undo-Redo buttons

PayPal Shopping Cart update:
- Support for AMP themes
- Subscribe and Donate options
- Info on "How to add shipping, VAT, and tax"


Mobirise 4.8.10
- Change log not available for this version


Mobirise 4.8.8
- Bug fixes: parallax in M4 themes, AMP sliders


Mobirise 4.8.6
- Mobirise Icons are available for AMP themes now
- Mobirise 2 Icons added


Mobirise 4.8.5
- Mobirise Icons are available for AMP themes now
- Mobirise 2 Icons added


Mobirise 4.8.1
- Custom subdomain on mobirisesite.com
- SSL certificate (url with https)
- Lightning-fast global CDN (Content Delivery Network)
- Unlimited pages
- Unlimited space and bandwidth


Mobirise 4.8.0
- Change log not available for this version


Mobirise 4.7.9
- Bug Fixes for AMP Themes: video autoplay, map layout, video lightbox


Mobirise 4.7.8
- Change log not available for this version


Mobirise 4.7.7
- Improved app loading
- Fixed inserting icons in menu in m3 themes
- Fixed and updated translations
- Fixed disappearance of text placeholders
- Select all text on first click
- Fixed font dropdown panel height


Mobirise 4.7.2
- Cookie Alert Extension updated - now it is "Cookie Alert and GDPR Compliance" - After activating GDPR compliance, all web forms on your website will have checkbox for agreeing to your Terms and Privacy Policy.
- Code Editor Extension updated - some fixes
- Different fixes in translation engine
- New AMP themes - StartupAMP and SpaceAMP


Mobirise 4.7.1
- Change log not available for this version


Mobirise 4.7.0
- Change log not available for this version


Mobirise 4.6.7
- Change log not available for this version


Mobirise 4.6.6
- Change log not available for this version


Mobirise 4.6.5
- Languages: Polish

Bug fixes:
- Issue with missing projects fixed
- Issue with missing user blocks fixed
- Mobirise 3: sliders
- Alignment in AgencyM4 and LawyerM4
- Text style for forms in StoreM4


Mobirise 4.6.4
- Themes optimization
- Languages: Romanian, Portuguese

Bug fixes:
- Mobirise 3: broken iconfonts


Mobirise 4.6.3
- New languages added: Dutch, Bulgarian, Russian, Chinese, Spanish, Italian
- Bootstrap is updated to v4.0.0 (stable) for all M4 themes


Mobirise 4.6.0
- Hotkey: if your Sites list is empty, you can load the list of previously used projects: open your Sites list and press Ctrl+Alt+L when it opened
- Now you can load your empty or broken project in the app to restore a previously saved site version from Site History
- SEO Extension updated: bug fixes

更新時間：2021-11-22
更新細節：

What's new in this version:

- Fixed an issue where the app fails to load on slower networks

更新時間：2021-11-22
更新細節：

更新時間：2021-11-22
更新細節：

What's new in this version:

Free Firewall 2.6.0 (64-bit)
New features and improvements:
- Big UI changes
- Windows kernel can now be released for network traffic
- Process monitor can be configured

Changes and fixes:
- Changes to the firewall rules are sometimes not adopted
- Applications launched from a network path could not be shared
- Antivirus programs could not get updates


Free Firewall 2.5.8 (64-bit)
- Additional translation: Polish


Free Firewall 2.5.7 (64-bit)
New features and improvements:
- The installation wizard can now also uninstall the software
- Minor changes to the user interface


Free Firewall 2.5.6 (64-bit)
New features and improvements:
- Cleaning up old program entries now shows the total number of removed entries
- Support for Windows Subsystem for Linux (WSL)
- Entries in the event list are highlighted in color
- Various enhancements to the user interface

Changes and fixes:
- Navigation menu decreased when a menu item was selected
- Tray menu in the notification area was sometimes not displayed
- Programs with internet access sometimes appeared in the program list with a delay


Free Firewall 2.5.5 (64-bit)
New features and improvements:
- Revision of the translation: Spanish

Changes and fixes:
- Unassigned events were displayed repeatedly
- The window was not minimized during the automatic start


Free Firewall 2.5.4 (64-bit)
New features and improvements:
- Revision of the translation: Spanish

Changes and fixes:
- The window was not minimized during the automatic start


Free Firewall 2.5.3 (64-bit)
New features and improvements:
- Reduced CPU utilization
- Improved cleanup after uninstallation
- New function: Password protection when starting FreeFirewall
- New translation: Turkish
- Chinese translation revised
- Changes in the language are now accepted immediately without restarting
- Reduced CPU utilization
- The number of alarms has been reduced

Changes and fixes:
- Export works again
- Sporadically, some applications were blocked without being able to be released


Free Firewall 2.5.2 (64-bit)
- Reduced CPU utilization


Free Firewall 2.5.1 (64-bit)
- 1621/5000
- New features and improvements
- New: Three firewall modes: Normal, Gaming, Blockade
- New Mode: Blockade: Network traffic is blocked for all programs and services.
- New Mode: Gaming: All notifications are disabled and games get network access.
- New translations: Dutch.
- New translations: Czech.
- Applications can now be added to the list itself.
- Window position is saved and loaded.
- Bernuzteroberfläche revised.
- Additional manual update search by button.
- Software and processes run more stable.
- Icon in the info area (tray) flashes on events.
- Icon in the info area (tray) shows different icons for each firewall mode.
- The sorting of the lists is stored across sessions.
- Revised context menu for applications
- Right click context menu for applications
- New functions in the context menu for applications: start program, copy path to the clipboard, open directory
- New: Temporary rules. Rules are reset after the next reboot.
- New: Ignore events. In the event list and in the event window.
- Lists of events can be sorted.
- Applications can be shown and hidden in the list.
- Lower memory consumption.
- Translated translations.
- Changes and fixes
- Bug fixed in sorting list by rule.
- List of events was not updated automatically as events were processed in the event window.
- Firewall rules were not correctly adopted sporadically.
- Send feedback
- History
- Saved
- Community


Free Firewall 2.5.0 (64-bit)
New features and improvements:
- New: Three firewall modes: Normal, Gaming, Blockad
- New Mode: Blockade: Network traffic is blocked for all programs and services
- New Mode: Gaming: All notifications are disabled and games get network access
- New translations: Dutch
- New translations: Czech
- Applications can now be added to the list itself
- Window position is saved and loaded
- Bernuzteroberfläche revised
- Additional manual update search by button
- Software and processes run more stable
- Icon in the info area (tray) flashes on events
- Icon in the info area (tray) shows different icons for each firewall mode
- The sorting of the lists is stored across sessions
- Revised context menu for applications
- Right click context menu for applications
- New functions in the context menu for applications: start program, copy path to the clipboard, open directory
- New: Temporary rules. Rules are reset after the next reboot
- New: Ignore events. In the event list and in the event window
- Lists of events can be sorted
- Applications can be shown and hidden in the list
- Lower memory consumption

Changes and fixes:
-Bug fixed in sorting list by rule
-List of events was not updated automatically as events were processed in the event window
-Firewall rules were not correctly adopted sporadically
- Send feedback
- History
- Saved
- Community


Free Firewall 2.4.3 (64-bit)
- New features and improvements
- New translations: Russian
- New translations: Italian
- New option: Clicking on the FreeFirewall icon in the notification area opens the event window
- Changes and fixes
- Option to remove obsolete entries did not work sporadically


Free Firewall 2.4.2 (64-bit)
- Change log not available for this version


Free Firewall 2.4.1 (64-bit)
- The software now has a digital signature so that no alerts about unknown publishers appear when the software starts


Free Firewall 2.4.0 (64-bit)

New features and improvements:
- New option: Sound playback on events
- Minor adjustments and enhancements to the user interface

Changes and fixes:
- Icons were not displayed in the list after restart
- Sporadically, alarms and events were not displayed
- Exporting settings did not work


Free Firewall 2.3.0 (64-bit)

New features and improvements:
- New translations: French, Spanish, Chinese

Changes and fixes:
- Corrected display errors in the user interface
- Corrected memory leak in firewall service
- Last rule, in selected zones, was not implemented correctly


Free Firewall 2.2.1 (64-bit)

New features and improvements:
- Filter function changed: Instead of filtering entries based on a string, the specified keywords are searched in the list
- New commands in the event overview: Allow or forbid all events

Changes and fixes:
- Zones could not be deleted
- Event window was not displayed in the previous version


Free Firewall 2.2.0 (64-bit)

New features and improvements:
- Display a program icon in the notification area
- New option: Firewall shrinks when closing in the notification area
- New menu in the notification area
- New Commands in Event Summary: Allow or Disallow All Events
- Firewall user interface starts faster
- New command: Delete filter
- AntiVirus software no longer blocks firewall startup

Changes and fixes:
- Fixed various graphical display errors
- Complete translation into English


Free Firewall 2.1.0 (64-bit)
- Change log not available for this version


Free Firewall 1.4.9.17123 (64-bit)
- Change log not available for this version


Free Firewall 1.4.8.17080 (64-bit)

Innovations:
- Translation in russian, korean and brazilian portuguese

Changes and fixes:
- Small acceleration of displaying notifications
- Error in starting the firewall on Windows 7 SP0
- Translations were not displayed correctly
- Bugfix of connection to the firewall failed error


Free Firewall 1.4.7.17046 (64-bit)
- Bugfix of connection to the firewall failed error


Free Firewall 1.4.6.17044 (64-bit)
- Translations were not displayed correctly


Free Firewall 1.4.5.17042 (64-bit)

Innovations:
- Translation in russian, korean and brazilian portuguese

Changes and fixes:
- Small acceleration of displaying notifications
- Error in starting the firewall on Windows 7 SP0


Free Firewall 1.4.3.17037 (64-bit)
- Changes and fixes: Error in starting the firewall on Windows 7 SP0


Free Firewall 1.4.1.16317 (64-bit)
- Speed up the display of notifications


Free Firewall 1.4.0.16316 (64-bit)

Innovations:
- Translation in russian, korean and brazilian portuguese


Free Firewall 1.3.2.16313 (64-bit)
- Change log not available for this version


Free Firewall 1.3.2.16283 (64-bit)
- Some applications become unstable and crashed through the Firewall
- New digital signature of the binary files


Free Firewall 1.3.0.16229 (64-bit)
- Translation into Portuguese

更新時間：2021-11-22
更新細節：

What's new in this version:

New Features from Sebastian Gemeiner:
- Win+Shift Handling (Multi Monitor Setup)
- Supports docking (Aero snap) by simulating key events to main form
- Lazy loading for new session entries in context menu

- Updated Docking Library to v3.0.6, Updated log4net library to v2.0.8, Switched to using Nuget Packages for third party libraries. [Maintenance]
- Grammar correction in warning dialog when saving new sessions with a '-pw' parameter
- Fix issue where multiple logfiles were being created
- Log4Net dll updated due to security issue with previous version CVE-2018-1285
- Various fixes to Settings provider
- Dozens of various fixes submitted by others

更新時間：2021-10-28
更新細節：

更新時間：2021-10-03
更新細節：

What's new in this version:

- Fixed an issue where Postman showed 'Certificate has expired' error for Let's Encrypt certificates

更新時間：2021-09-10
更新細節：

What's new in this version:

- Fixed an issue where importing WSDL specification as a folder failed