FileZilla (64-bit) 歷史版本列表 Page42

更新時間：2020-01-16
更新細節：

What's new in this version:

New:
- Use VNC Viewer to control which monitor is displayed. (requires VNC Viewer 6.20.113 or later)
- Support for High Speed Streaming and Audio when connecting to Virtual Mode sessions via the Virtual Mode Daemon (vncserver-virtuald)
- Added support for Windows Server 2019 and CentOS/RHEL 8
- VNC Server will now additionally log to a file at info level (30) by default, in addition to EventLog/syslog logging at audit level (10)
- Add a button to test/refresh connectivity between VNC Server and RealVNC's Cloud
- Advanced parameters can now be set via the Expert tab in VNC Server's Options. This will typically be used with instruction from RealVNC Support when troubleshooting an issue.

Improved:
- Better setup experience for users when remotely installing VNC Server on Windows
- VNC Server will recommend testing screen blanking before it is enabled​

更新時間：2020-01-11
更新細節：

What's new in this version:

- Greatly improved the smoothness of Epic Seven. To be coming up to 60 FPS is easy.
- Fixed the current-like noise issue in Ludo All Star, Ludo Comfun and so on.
- Fixed an issue where World of Kings froze.
- Fixed issues where Guns Girl froze and crashed (To reinstall the game is needed).
- Fixed an issue where the blurry screen appeared on the built-in browser when the graphics cards are Intel integrated graphics cards.
- Fixed the crash issue that would occur when the microphone was plugged into or unplugged. Microphone hot plug is supported. Voice chat is more enjoyable.

更新時間：2020-01-10
更新細節：

What's new in this version:

USB Network Gate 8.2.2087
- Improved: support for high DPI displays
- Fixed: an issue when restoring the client’s connections to two or more shared USB devices after the client machine reboot


USB Network Gate 8.1.2013
- Change log not available for this version


USB Network Gate 8.0.1859
- Improved: GUI compatibility with high-resolution monitors. Improved: the performance of the network connection between the USB Network Gate server and client. Improved: drivers are digitally signed with WHQL. Fixed: execution of the "unshare-all-usb-ports" command, when the device was shared from the USB hub, which was disconnected from the machine and was not displayed in the list. Fixed: the occurrence of several BSODs. Fixed: inaccurate displaying of the description and status of the shared devices shown in the command line on the client. Fixed: functioning with the USB drives displayed in the system as SCSI (e.g. Seagate Expansion).
- Improved: data transfer speed
- Several other major enhancements
- Fixed: some minor bugs and glitches


USB Network Gate 8.0.1828
- Added: displaying the amount of data transferred in both directions for each connection
- Added: displaying the data transfer speed in both directions for each connection
- Added: displaying the client's IP address (instead of "localhost") on other clients, when it is connected to itself locally
- Added: automatic client disconnection option, if the shared device was not active for a certain amount of time
- Added: the option that prevents the restart of the shared device after its disconnection
- Added: Windows Server 2016 full support
- Improved: GUI compatibility with high-resolution monitors
- Improved: the performance of the network connection between the USB Network Gate server and client
- Improved: drivers are digitally signed with WHQL
- Fixed: execution of the "unshare-all-usb-ports" command, when the device was shared from the USB hub, which was disconnected from the machine and was not displayed in the list
- Fixed: the occurrence of several BSODs
- Fixed: inaccurate displaying of the description and status of the shared devices shown in the command line on the client
- Fixed: functioning with the USB drives displayed in the system as SCSI (e.g. Seagate Expansion)
- Fixed: the "Allow disconnection by other users" option did not persist when it was enabled after the device was shared
- Fixed: issues when sharing identical devices
- Fixed: minor activation issues
- Added the following localizations: Chinese (China), Chinese (Taiwan), Dutch, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish

更新時間：2019-12-30
更新細節：

更新時間：2019-12-24
更新細節：

What's new in this version:

Bugfixes and minor changes:
- SFTP: Fixed handle leak on Windows
- SFTP: Remote paths were not fully resolved on all operations

更新時間：2019-12-24
更新細節：

What's new in this version:

R-Studio 8.12 build 175721
- Change log not available for this version


R-Studio 8.12 build 175573
- Change log not available for this version


R-Studio 8.12 build 175481
New Features:
- Support for the APFS file system created by macOS Catalina has been added
- Support of the APFS Fusion Drive has been added
- Several paths can be immediately specified for multiple-volume images

Technician version:
- Alternative paths can be specified for places to store recovered files and images

Post Action options have been added for unattended operations:
- Automatic shutdown once lengthy operations have completed: file recovery, disk scan, and disk imaging. When this option is specified, R-Studio checks that all relevant information (scan info, RAID layouts, etc) has been saved and advanced recovery features specified
- Automatic email notification regarding operation success/failure.

Improvements:
- Search for deleted files has been improved for the Ext2/3/4 and UFS1/UFS2 file systems
- File system reconstruction has been improved for APFS partitions


R-Studio 8.11 build 175479
New features:
- Automatic recognition and assembly of complex disk manager objects whose components are also various disk manager objects. This may be useful for data recovery from various NAS devices
- Updated Windows driver that can mount R-Drive Image type (.rdr) images of hard drives, besides logical disks, as virtual hard drives in the system

Improvements:
- The Open folder when done option has been added to the Recover dialog box
- File enumeration speed has been increased by several dozen times for Ext2/3/4 and UFS1/UFS2 partitions
- Folder scan to improve folder tree reconstruction on recognized Ext2/3/4 and UFS1/UFS2 partitions
- Ext4fs extent reconstruction for large deleted files even if they are not in the file system journal
- Network data recovery speed has been increased by several dozen times

Bug-fixes:
- R-Studio may have opened some partitions with large numbers of files for a long time
- The path selection dialog box may have frozen if some network drives were connected to the system under a user account
- R-Studio may have crashed during performing recheck recovery chances
- Volume labels may have been detected incorrectly for UFS1 partitions
- Idle RAID sequences may have appeared when a custom RAID was created. Those sequences could not be deleted
- When an invalid RAID table was applied, the program didn't throw a warning
- An incorrect minimum number of RAID table lines may have appeared for RAID0 and RAID4
- The cursor may have moved incorrectly when editing the RAID table
- Unit fields (TB, GB, MB) in the RAID editor may have worked incorrectly
- The Refresh DDI command may have appeared even when the DDI device was not connected


R-Studio 8.11 build 175357
New features:
- Automatic recognition and assembly of complex disk manager objects whose components are also various disk manager objects. This may be useful for data recovery from various NAS devices.
- Updated Windows driver that can mount R-Drive Image type (.rdr) images of hard drives, besides logical disks, as virtual hard drives in the system.

Improvements:
- The Open folder when done option has been added to the Recover dialog box.
- File enumeration speed has been increased by several dozen times for Ext2/3/4 and UFS1/UFS2 partitions.
- Folder scan to improve folder tree reconstruction on recognized Ext2/3/4 and UFS1/UFS2 partitions.
- Ext4fs extent reconstruction for large deleted files even if they are not in the file system journal.
- Network data recovery speed has been increased by several dozen times.

Bug-fixes:
- R-Studio may have opened some partitions with large numbers of files for a long time. Fixed.
- The path selection dialog box may have frozen if some network drives were connected to the system under a user account. Fixed.
- R-Studio may have crashed during performing recheck recovery chances. Fixed.
- Volume labels may have been detected incorrectly for UFS1 partitions. Fixed.
- Idle RAID sequences may have appeared when a custom RAID was created. Those sequences could not be deleted. Fixed.
- When an invalid RAID table was applied, the program didn't throw a warning. Fixed.
- An incorrect minimum number of RAID table lines may have appeared for RAID0 and RAID4. Fixed.
- The cursor may have moved incorrectly when editing the RAID table. Fixed.
- Unit fields (TB, GB, MB) in the RAID editor may have worked incorrectly. Fixed.
- The Refresh DDI command may have appeared even when the DDI device was not connected. Fixed.


R-Studio 8.11 Build 175351
- Change log not available for this version


R-Studio 8.10 Build 173987
Improvements:
- LVM processing has been improved

Bugfixes:
- Empty sequences were generated in the Sequences window when the Custom RAID type was selected. Those sequences could not be deleted
- The last valid RAID block order table was saved rather than the current invalid table
- The Get Info window showed wrong file info when sorting had been changed
- Clicking an empty space on the Get Info window opened Hexadecimal editor
- Files remained marked when files were recovered with the Do not recover duplicate files from Extra Found Files option enabled
- Not all information on Overlapping files and Regions when saving file names
- The Find/Mark dialog box didn't preserve selections for the Look At Files/Folders option
- A file and folder may have the same ID on the time/extension sorting tabs. Clicking such object may have resulted in jumping to another object with the same ID. For example, to a file with an ID randomly coinciding with the ID of a folder
- Saving file names for marked files didn't save names for files with links in their paths. Only link name was saved without files in the related folder
- Some small interface and cosmetic bugs have been fixed


R-Studio 8.10 Build 173981
- Change log not available for this version


R-Studio 8.10 Build 173857
- Change log not available for this version


R-Studio 8.9 Build 173593
Bug-fixes:
- The program may have crashed when parsing damaged xattr on the UFS2 file system
- Some small internal bugfixes


R-Studio 8.9 Build 173589
New features:
- Estimation of chances for successful file recovery
- Recovery of names and paths for files deleted to Recycle Bin and Trash
- Support for ReFS 3.4 file system

Improvements:
- A complete redesign of the Find/Mark dialog box.
- The parsing and reconstruction of the FAT32 and NTFS file systems has been improved.
- The parsing of scanned APFS partitions has been improved, especially for large APFS file systems, for which the decrease of parsing time may reach several thousand times.

Bug-fixes:
- Large ext4 file systems (60+TB) may have been processed incorrectly. Fixed.
- Sometimes the program may have crashed or frozen during file enumeration and disk scan. Fixed.
- The program may have written data to network drives incorrectly. Fixed.
- Sometimes file systems on automatically created virtual RAIDs may have been created incorrectly when the RAID parents were disk images. Fixed.

更新時間：2019-12-24
更新細節：

What's new in this version:

X-Proxy 6.2.0.4
- Removed Hijacker Homepage Scan
- Removed vpn servers
- Updated the code for the new domain


X-Proxy 6.2.0.3
- Modified configuration in VPN servers


X-Proxy 6.2.0.2
- Updated information and signature for the new year
- Optimized the search and download of proxy servers


X-Proxy 6.2.0.1
- Fixed bug in the country indicator for vpn servers
- Optimized the search and download of proxy servers
- Optimized connection checking for vpn servers
- Added new VPN servers

更新時間：2019-12-22
更新細節：

What's new in this version:

Bugfixes and minor changes:
- SFTP: Fixed a regression connecting using a password-protected keyfile

更新時間：2019-12-19
更新細節：

What's new in this version:

- VS: Fix support for v142 toolset minor versions in VS 16.5+
- FindBLAS: Consider OpenBLAS with thread libraries only with C or CXX
- FindBoost: Add support for Boost 1.72
- Autogen: Revert processing of .hh files for compatibility
- FindLAPACK: Fix support for LAPACK symbols inside BLAS libraries
- CMake 3.16.2
- PCH: Append pch header file to list of forced include files
- Tests: Fix testCTestResourceSpec struct initialization for some compilers

更新時間：2019-12-09
更新細節：

What's new in this version:

- Fix nonsense vertical scale in NoteLayer when displaying a model with non-Hz scale (e.g. from an analysis plugin that outputs MIDI note values)
- Fix failure to open playback device when using macOS Catalina with certain audio devices
- Fix failure to make installed executables executable when compiling and installing the source package