EmEditor Professional 歷史版本列表 Page6

更新時間：2023-07-14
更新細節：

What's new in this version:

- Fixed an error caused while using context menu toggles

更新時間：2023-07-03
更新細節：

What's new in this version:

- Bug fixes and improvements

更新時間：2023-06-30
更新細節：

What's new in this version:

Fixed:
- Distortion device: Fixed issues when the device wakes up after sleep
- Arpeggiator (Note FX) device: No longer crashes the audio engine when creating notes below MIDI note 0
- Instrument Selector, FX Selector, and Note FX Selector: Fixed a timing problem with the Index parameter
- Bend and Pinch (Level) and Ø Bend and Ø Pinch (Phase) Grid modules: Improved numeric stability at extreme (> 95 %) settings
- Distortion (Distortion) device: Now has a wider spectrum display, keeping all frequency parameters on screen
- Audio Sidechain (I/O) Grid module: Is now properly delay compensated
- Fixed a delay compensation issue with delay devices and plug-ins, that was causing latency on the master
- Folded note ("drum" editor) mode was dropping selection when scrolling offscreen while selecting
- Option to Convert Track (to Instrument/Audio/Hybrid) now works in the Mix view
- Crash in some cases of double-clicking on clip loop bar when there is automation in the track
- Slice in Place did not work with a reversed audio event
- Copy/paste clip or time selection was always including automation, even when Automation Follows Clip Editing was deactivated
- Fixed an assortment of random engine crashes
- Increased the size of Japanese, Chinese, and Korean fonts
- Mapping transport position or loop setting positions now has a usable range
- MIDI file import did not assign the project tempo when it contained a single tempo event
- MIDI clip import was only taking the integer of the tempo
- Modulators now have a full and shaded gap between their square interface and their additional pane of parameters
- VST: plug-ins with an infinite tail would start processing right after activation
- CLAP plug-ins: Fixed a crash with polyphonic modulations
- CLAP: Selected plug-in remote control page is now properly restored on project reload
- CLAP: Plug-in's output note expressions in Bitwig no longer cause a gliss on note start
- CLAP plug-ins: Fixed note expression gain scaling
- Controller API: fixed a bug that could lead to different TrackProxy elements controlling the same RemoteControls
- Removed incorrect deprecated message in extensions API
- Linux: Re-enabled VSync on X11
- Linux/X11: Fixed some uninitialized xcb response types in the plug-in host
- ALS (Ableton) Import - Wasn't displaying the names of the cells from Drum Racks
- ALS (Ableton) Import - Some volume levels were importing incorrectly
- New FL Studio (FLP) files can be imported
- Other things too

Improvements:
Internal overhauls:
- Devices now sleep more often, often resulting in CPU performance improvements
- Copy and paste have been reworked to work much better for incoming modulations, manual mappings, Grid signal connections, I/O buss routings, Sends etc.
- Manual controller mappings that launch clips now also trigger their release action when the button is released
- Modulators and Grid modules now have both panels for showing Modulation Routings by Source and Modulation Routings by Destination

In the Device Panel, the Remote Controls toggle on devices and track headers now doubles as a mapping indicator:
- When the knob is surrounded by a solid orange circle (◯), an entire remote control bank is currently under control
- When the knob is surrounded by a dashed orange circle (◌), some parameters are currently under control
- When the knob is undecorated, no parameters are currently under control

Automation dots on parameters are now color-coded to their status:
- A blue dot means the automation is in control and playing back
- A green dot means the automation is current being overridden and can be restored
- A red dot means automation is being recorded
- A gray dot means automation is present but not currently being played
- Micro-pitch expressions can now be drawn and recorded to a range of ±128 semitones
- The Next Action section of the Launcher clip Inspector Panel has been reworked
- A power button toggle sets whether the Next Action is set to play after the clip or not
- As on Release actions can now trigger the Next Action, the function can be selected even when the toggle is off
- By default, the Next Action timing is set in loop iterations (the loop icon button), with a value of 1x, or trigger after the clip plays once
- You can adjust the number of loop counts, or disable the loop icon to set the time in free bars and beats
- Next Action for Launcher clips now fire at the designated time, even if set in the future
- Previously, Next Action for non-looping clips would trigger immediately after the clip ended. If you prefer this behavior, set the Next Action to be linked and fire after one playback cycle (1x)
- When mapping a modulator, the detail panel of the source modulator now remains open
- When dragging modulator mappings, detail panels now remain open
- Classic LFO & LFO (LFO), and ParSeq-8 & Steps (Sequence) modulators: All allow negative phase values now, so timing can easily be adjusted as slightly later or earlier
- Oscilloscope (Display) Grid module: Now has a Stereo-ize mode, that shows the first in port's signal in its color (left channel) and white (right channel)
- LFO (LFO) modulator: Now has Groove (Grv) Trigger Mode, for syncing to groove timing on playback
- Ramp (Envelope) modulator: Now has an Ignore Notes option to start new ramps at the destination point. Good for using Ramp as a gliding toggle (via the Invert parameter), etc.
- Exp (Math) Grid modules: Now has a Base parameter for choosing between 2ˣ, eˣ, and 10ˣ of the incoming signal (x), which can be set by right-clicking on the module itself
- Log (Math) Grid modules: Now has a Base parameter for choosing between log₂x, logₑx, and log₁₀x of the incoming signal (x), which can be set by right-clicking on the module itself
- MIDI (Note-driven) modulator: Now has an Inspector parameter for whether to apply Smoothing or not
- Organ device: Drawbar names now start with the drawbar number
- Instrument Selector, FX Selector, Note FX Selector (Container) devices: All have a panel menu for setting the Mode, allowing notes and other messages to cycle to other layers without using modulators
- Transport (LFO) Grid module: Is more visually similar to the Device Ø section of all Grid device Inspectors
- Is also part of a right-click swap group of "phase providers," for going between Phase In (I/O) ↔︎ Transport (LFO) ↔︎ Phasor (Phase) ↔︎ Clock (LFO)
- Voice Stack modulator: Default mode is now set to 0 to +1, since this is unique

Several right-click parameter/setting options are now available:
- Right-clicking any track solo button (either in Arranger track headers, or on the Mixer Panel) give options for toggling the Solo as Cue and Exclusive Solo preferences
- Oscilloscope and Spectrum (Analysis) devices: You can right-click on these devices now to switch between the Mini (default) and Wide Device View options
- Pitch In (I/O) Grid module: Now can be right-clicked to change its Voice Priority setting (Default method, or the Lowest, Last, or Highest note) via context menu
- Mod Delay (Delay/FX) Grid module: Now can be right-clicked to change its Clip Mode (for Feedback) setting via context menu
- Blend (Mix) Grid module: Now can be right-clicked to change its Blending Mode setting (for crossfading with Equal Gain or Equal Power) via context menu
- Velo Mult (Level) Grid module: Now can be right-clicked to change its Response setting (either Linear for straight multiplication, or Perceptual, the loudness-friendly default) via context menu
- = and ≠ (Math) Grid module: Now can be right-clicked to toggle the Exact Matches Only setting via context menu
- Value Readout (Display) Grid module: Now can be right-clicked to toggle the Voice Shown setting (either Last voice only, or a summed All voices) via context menu
- Module has also been reconfigured for better display of user-provided names
- Various Gain labels in devices have been clarified to better describe their position in the signal flow
- Mixer Panel view toggles have been reorganized and beautified, as have other layouts and graphics thru out the program

Various controller mapping updates:
- The visualization color for each controller (painting the current clip targets in the Launcher, etc.) is now adjustable, as well as other style improvements
- Parameter context menu lists all active mappings from controllers and the computer keyboard
- Parameters that are mapped manually now show indication symbols (just as auto mappings from a controller script do)

New preferences that are now available:
- The amount of sequencer Latency can now be adjusted, for adjusting the window within which Launcher clips are triggered (Dashboard > Settings > Behavior > Sequencer)
- The bit depth of new audio can now be set separately, for the Recording Resolution and the Bounce Resolution, including a 32-bit (floating-point) option (Dashboard > Settings > Recording > Created Audio)
- You can now Prefer CLAP over VST versions of plug-ins, when both are available (Dashboard > Settings > Locations > Plug-in Locations)
- Mute/Solo/Arm shortcut commands now operate on all selected tracks
- Formant and pitch expression zoom settings are now remembered independently
- Akai APC40mk2 controller script: Updated to take advantage of project- and track-level remote controls

更新時間：2023-06-28
更新細節：

What's new in this version:

- Fixed an error caused when using Remote Console with Secure Preview

更新時間：2023-06-23
更新細節：

What's new in this version:

- Fixed an error caused when using FlyWheel WordPress as an external server

更新時間：2023-06-22
更新細節：

What's new in this version:

Added:
- Typescript and JavaScript files can now be bundled together
- Added an option to remove upload history from prepros.config file
- Added context menu options to mark files as uploaded

Fixed:
- Fixed a SFTP upload issue caused by outdated crypto algorithms

Improved:
- Significantly improved TypeScript compilation speed
- Other big under the hood improvements

Updated:
- Updated Babel, Babel plugins and presets to 7.22.5
- Updated Autoprefixer to 10.4.14
- Updated Node Sass to 9.0.0
- Updated PostCSS to 8.4.24
- Updated PostCSS Preset Env to 8.4.2
- Updated Dart Sass to 1.63.3
- Updated Tailwindcss to 3.3.2
- Updated Terser to 5.17.7
- Updated Webpack to 5.86.0

更新時間：2023-06-13
更新細節：

What's new in this version:

- Share multiple projects at once. You can now share several projects to your team at once. Choose Edit-Projects menu. Select the projects and click share.
- Business privacy mode. Get all the business features while staying offline and cloud free
- Small tweaks and improvements

更新時間：2023-06-02
更新細節：

What's new in this version:

Fixed:
- a bug where Find in Files couldn’t match “*.*a”
- a potential crash when using Large File Controller
- other potential crashes

更新時間：2023-05-24
更新細節：

What's new in this version:

- Adjusted the horizontal mouse wheel change while pressing the Shift key
- Allowed drag and drop the vertical selection to copy or move
- Improved the Left and Home key movements while row headings are enabled in the CSV cell selection mode

Fixed:
- the behavior of Replace in Files with J replacement expressions
- an issue where Replace in Files did not show the replacement count in the status bar
- a potential crash on Delete Columns, Clear Contents, and other conversion commands with a very large CSV file
- CSV column adjustment issue after Undo
- a potential crash on the Find in Files command with the Output as the Direct Open option
- a potential freeze on the Compare command if the Split vertically option was not selected The new version does NOT highlight changed lines character-by-character anymore unless the Split vertically option is selected
- a display issue on a CSV mode while row headings are enabled

更新時間：2023-05-18
更新細節：

What's new in this version:

- On this new version (v22.4), we improved the behavior and status message when opening a very large file from a slow or network drive. In previous versions, EmEditor was optimized for opening a very large file from a fast hard drive or SSD. It allocated a large chunk of memory to read file contents, and did not update the progress on the status bar or Large File Controller while processing the chunk of memory. This works well when reading a large file from a fast hard drive or SSD, but it looked non-responsive if reading a file from a slow or network drive. v22.4 measures the time it takes to read the first 1 MB of a file when opening. Then it estimates the reading speed and how many bytes it should read before updating the progress on the status bar and Large File Controller. This new algorithm allows EmEditor to show the progress more frequently for slow drives while maintaining the fast reading speed for faster drives.
- v22.4 also improved the speed of Find in Files while improving the response time when canceling Find in Files. This was made possible by making multiple zones in a file to search in order to respond to a cancellation request while maintaining the overall speed by using optimized, multi-threaded code. In our test, the Find in Files became 2.76 times faster compared to v22.3. v22.4 also improves the speed of several other commands including the Delete Columns (CSV), Clear Contents (CSV), Sort Randomly, and base 64 encoding/decoding commands. The Clear Contents (CSV) command is called when pressing the DELETE key while selecting CSV cells or columns in the CSV cell selection mode. This is one of the most often used operations in CSV editing, and I hope the speed improvement will increase your productivity. The speed of the Sort Randomly command was further improved by using a fast pseudorandom number generator (Xoshiro-cpp).
- A customer asked for the ability to update the highlighting of matched strings while you are typing a search term in the Find dialog box. I’ve known this feature from other editors, and I decided to add this feature to v22.4. The feature is turned off by default, but can be enabled by selecting the Auto Highlight in the menu displayed when you click the > button next to the Find drop-down list box in the Find dialog box. When this option is on, the search highlighting will be turned on only while the Find/Replace/Find in Files/Replace in Files dialog box or the Find toolbar is displayed. This feature is available on EmEditor Professional and EmEditor Free.
- Several customers have asked for an improvement in vertical scrolling when you select multiple lines of text and drag the mouse (move the mouse while pressing the left mouse button) past the bottom edge of the editor window. Some customers prefer scrolling down while other customers prefer jumping to the bottom of the document. Some customers would like to select many lines in the middle of the document, for instance, from Line 1 million to Line 2 million in a 3 million-line document. To satisfy all these customers, v22.4 introduces a new scrolling mode while you drag the mouse as well as new mouse pointer shapes as explained below.
- First, v22.4 changes the mouse pointer shape when you drag the mouse past the edge of the editor window. The farther you move the mouse pointer past the edge of the window, the faster the scrolling speed becomes. If you move the mouse pointer too far away from the window, the scrolling behaves as if you were dragging the scroll box (thumb). This mode allows you to move the endpoint of the selection easily to any position in the document. By default, the Minimap will be displayed when you enter this mode. Pressing the ESC key while still pressing the left mouse button will switch back to the normal selection mode. This feature is available on EmEditor Professional and EmEditor Free.
- Makoto Emura added the syntax check feature using Language Server Protocol (LSP). The new feature is available in JavaScript as well as other languages, and you can check the syntax of your macros written in JavaScript. This feature is available only on EmEditor Professional.
- He also improved the CommitList plug-in by adding the ability to checkout commits and create new branches. This feature is available only on EmEditor Professional.