Dropbox

What's new in this version:

- bgp - added comment functionality for BGP VPN (CLI only)
- bgp - do not reflect route back to sender
- bgp - fixed BGP advertisement PCAP saver
- bgp - fixed connection establishment using link-local addresses
- bgp - improved BGP advertisement printing
- bgp - improved BGP session load distribution across multiple CPU cores
- bgp - properly set "bgp-ext-communities" from "communities" list
- bluetooth - added unique advertise message filtering
- bonding - properly detect VPLS interface state changes
- branding - fixed identity setting from branding package
- bridge - added support for static MDB entries
- bridge - disallow port-controller while the bridge has MSTP enabled
- bridge - fixed "edge=yes" setting for MSTP
- bridge - fixed MSTP compatibility with STP
- bridge - fixed R/M/STP bridge identifier on protocol-mode change
- bridge - fixed RSTP BCP with bridged PPP interfaces
- bridge - fixed STP blocking state on port-controller
- bridge - fixed host moving with fast-path
- bridge - fixed incorrect root port blocking for MSTP
- bridge - fixed master port conversion
- bridge - fixed mst-override port priority for MSTP
- bridge - fixed port priority for STP and RSTP
- bridge - improved port-controller system stability
- bridge - improved system stability when using MSTP and many VLAN mappings
- bridge - removed "age" monitoring property from the host table
- certificate - improved Let's Encrypt logging and error recovery
- certificate - improved certificate management, signing and storing processes
- conntrack - improved system stability when PPTP helper is used
- conntrack - improved system stability when processing SCTP connections on TILE
- console - updated copyright notice
- container - fixed access to "/dev/stderr" from containers
- container - fixed handling of groups and usernames from Dockerfile
- container - fixed tar extracting
- container - made "ram" and "tmp" directories use tmpfs
- crs1xx/2xx - fixed "new-customer-pcp" setting for ACL rules
- dhcpv6-client - handle receiving of invalid T1 and T2 times
- discovery - added "discovered-by" parameter to indicate which protocol discovered the neighbor
- discovery - added "mode" parameter for discovery configuration
- discovery - fixed neighbor discovery on Mesh interfaces
- discovery - report IPv6 LL address if global address does not exist
- disk - added support for manual RAM file system (TMPFS) creation (CLI only)
- disk - improved external storage file system mounting, formatting and naming
- dns - do not query upstream DNS servers for matched regex records
- dns - fixed changing of "forward-to" parameter for FWD entries
- dns - fixed handling of CNAME entry pointing to another FWD entry
- dns - fixed handling of FWD entries where "forward-to" is a hostname
- dns - fixed incorrect TTL=0 reporting for cached entries
- dns - improved resolved static entry addition to address list
- dns - improved service stability when CNAME points to a FWD entry
- dns - query upstream DNS servers for other record types even if static entry exists
- dns - require "write" policy for DNS cache flushing
- dns - respond with lowest TTL for inner queries containing A, AAAA, CNAME chains
- filesystem - fixed repartition on devices with containers
- firewall - added "set-priority" option for IPv6 mangle firewall
- firewall - made "dynamic" parameter settable for IPv4 address lists
- hotspot - added "install-hotspot-queue" parameter to control dynamic queue creation
- hotspot - fixed maximum allowed connections limitation
- hotspot - fixed minor memory leak after each successful login from WEB
- hotspot - improved limitation of maximum allowed connections
- hotspot - improved system stability when clients migrate between bridge ports or VLANs
- ike1 - disallow "remote-id" setting for identity
- ike1 - fixed XAuth responder trying to recreate phase 1
- ike1 - improved expired IPsec-SA processing
- ike2 - added support for ChaChaPoly1305 encryption
- ike2 - added support for DH Group 31 (EC25519) (CLI only)
- ike2 - fixed rekey notify creation
- ike2 - improved certificate payload parsing
- interface - do not allow adding invalid "veth" interfaces
- interface - improved system stability when handling large packets on CCR2216
- interface - show RTL8153 CDC Modem Device as ethernet
- ipsec - added "current-address" parameter for peers with DNS address
- ipsec - added hardware acceleration support for IPQ-6010
- ipsec - added support for AVX optimized SHA acceleration
- ipsec - improved "H" (hw-aead) flag presence for accelerated SA's
- ipsec - improved IKE payload processing
- ipsec - improved configuration of IPsec proposal auth-algorithms
- ipsec - removed Blowfish and Camellia encryption algorithms for IKE
- ipv6 - do not generate LL addresses for VPN interfaces when IPv6 is disabled
- ipv6 - do not use invalid/disabled global addresses for IPv6 ND
- l2tp - added VRF support for L2TP Ether interfaces
- l3hw - fixed host offloading in a case of MAC address change
- l3hw - fixed offloaded NAT for CRS309 switch
- l3hw - improved system stability when disabling or enabling L3HW offloading
- leds - fixed default LED configuration on netFiber 9
- leds - fixed turning off LEDs after system shutdown
- lte - added AT channel support for Telit FN990
- lte - added CA information in 5G mode
- lte - fixed error handling on opening AT control channel
- lte - fixed new MTU value validation
- lte - improved stability when LTE passthrough is enabled on Chateau 5G
- lte - properly show leading zeros in MCC and MNC strings
- lte - show band number in "ca-band" in NSA mode on Chateau 5G
- lte - use RSRP value reported by MBIM signal for MBIM type modems
- macsec - fixed packet duplication on Ethernet interface
- macsec - fixed packet transmission using traffic-generator
- macsec - fixed packet validation
- modem - added USB tethering support for Google Pixel 7 devices
- mpls - added VPLS LDP information in remote/local-mappings
- mpls - fixed assigning of explicit null label for IPv6
- netinstall - added "-i " parameter for Netinstall (CLI Linux)
- netinstall - fixed Netinstall procedure on RouterBOOT versions from 3.27 to 6.41
- netinstall - improved automatic netbooting interface selection
- netwatch - added support for "https-get" type (CLI only)
- netwatch - fixed reporting of VRF name in logging messages
- netwatch - improved "interval" and "packet-interval" coexistence for ICMP type
- ntp - log error message when server is unreachable
- ospf - fixed MD5 checksum calculation
- ospf - fixed simple authentication and checksums for NBMA and PTMP links
- ospf - fixed simple authentication checksum calculation
- ospf - fixed virtual-link address selection for PTP links
- ovpn - added "CBC" postfix to AES cipher names
- ovpn - added "route-nopull" option for client side
- ovpn - added hardware acceleration support for IPQ-6010
- ovpn - added support for IPv6 tunneling
- ovpn - fixed "Called-Station-Id" usage in RADIUS requests
- package - fixed missing menus when both "lora" and "wifiwave2" packages are installed
- ping - fixed ARP ping
- port - added serial port support for Telit FN990 modem
- port - do not show unusable USB port on hAP ax^2
- port - fixed R11e-LTE6 port mapping
- ppp - changed default lease time of dynamic DHCPv6 server to 1 day
- ppp - do not inherit routing mark for encapsulated packets
- ppp - fixed displaying of "info" command for PPP client
- ppp - improved authentication method negotiation
- pppoe - improved service stability when establishing PPPoE sessions
- quickset - fixed addition of bridge filter rules in bridged mode
- quickset - fixed interface list member table on configuration changes
- quickset - update DNS server IP address when changing router's IP address
- rb4011 - fixed reporting of current CPU frequency and changed default frequency to "auto"
- sfp - added 2.5G SFP module support for RB5009
- sfp - allow usage of "10G Base-LR" mode for XS+31LC10D module
- snmp - added support for "lldpRemLocalPortNum" OID's
- snmp - improved stability when receiving bogus packets
- ssh - added support for Ed25519 key exchange
- ssh - do not allow SHA1 usage with strong crypto enabled
- ssh - fixed handling of non standard size RSA keys
- supout - added MSTI and mst-override monitor for bridge MSTP
- supout - added missing IPv6 firewall sections
- switch - avoid packet corruption in some setups for 98DX3257, 98DX3255, 98DX4310, 98DX8525 and 98PX1012 switches
- switch - fixed SFP Tx disable when changing auto-negotiation settings for 98DXxxxx and 98PX1012 switches
- switch - fixed egress mirror for 98DX4310 and 98DX8525 switches
- switch - hide invalid settings for 98DX3255 and 98DX8525 switch chips
- switch - improved 10G, 25G and 40G interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98DX8525, 98PX1012 switches
- switch - improved 10G, 25G and 40G interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98PX1012 switches
- switch - improved 10G, 25G, 40G and 100G interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98PX1012 switches
- switch - improved 10Gbps Ethernet interface stability for 98DX8212 switch
- switch - improved 25G interface stability for 98PX1012, 98DX4310 and 98DX8525 switches (introduced in v7.6)
- switch - increased the maximum value of "rate" for ACL rules
- swos - fixed "allow-from-ports" setting
- swos - fixed SwOS configuration changes from RouterOS
- swos - improved default SwOS backup file name
- system - allow up to 4GB of RAM allocation per process on x86, ARM64 and TILE
- system - improved handling of user policies
- timezone - updated timezone information from "tzdata2022g" release
- tr069-client - updated data model to version 2.15
- traffic-flow - fixed sending of sampling interval
- tunnels - added VRF support for EoIP, IPIP and GRE tunnels
- vpls - expose VPLS related debug logs to "vpls" logging topic
- vrrp - always use slave interface MTU
- vrrp - improved interface stability on configuration changes
- vxlan - added "local-address" parameter support
- vxlan - added VRF support
- w60g - improved system stability for Cube Pro devices
- webfig - ensure login page is displayed after each log out
- webfig - fixed accessing of WebFig when "Interface" menu is disabled by skin
- webfig - fixed displaying of VRF routes
- webfig - fixed input validation for "VPLS ID" parameter
- webfig - fixed setting of "DHCP Option Set" parameter
- webfig - improved WEB caching capabilities
- webfig - properly detect current location for navigation buttons
- webfig - properly show limited number of available options
- wifiwave2 - added "datapath" settings to configure data forwarding for an interface (CLI only)
- wifiwave2 - added "ft-preserve-vlanid" parameter to control whether to change VLAN ID after FT
- wifiwave2 - added "provisioning" menu to automatically assign interface configurations to radios (CLI only)
- wifiwave2 - added disable/enable commands to configuration profile sub-menus (CLI only)
- wifiwave2 - added information of per-station throughput in the registration table
- wifiwave2 - added initial CAPsMAN support (only compatible with wifiwave2 interfaces) (CLI only)
- wifiwave2 - added interworking/Hotspot 2.0 support (CLI only)
- wifiwave2 - added more informative log messages on configuration profile changes
- wifiwave2 - added option to set per-client vlan-id in access list (only supported on 802.11ax interfaces) (CLI only)
- wifiwave2 - do not permit a client device to be connected to more than one interface at a time
- wifiwave2 - fixed "radio-mac" provisioning matcher
- wifiwave2 - fixed 4-way handshake with TKIP
- wifiwave2 - improved compliance with regulatory domain information
- wifiwave2 - improved general system stability
- wifiwave2 - improved system stability when multiple virtual AP are configured
- wifiwave2 - properly report interface on which traffic is received when multiple station interfaces are used concurrently
- wifiwave2 - released packages for MMIPS, PPC, TILE and x86
- wifiwave2 - removed maximum limit for group key update interval and changed the default to 1 day
- winbox - added "Active" prefix for current "Circuit ID" and "Cookie Length" fields for L2TP-Ether interfaces
- winbox - added "Make Static" button to "IP/DHCP Server/Leases" menu
- winbox - added "bus" parameter for "USB Power Reset" command on Chateau ax
- winbox - added missing "force" parameter for new "IP/DHCP Server/Options" entries
- winbox - added missing "vlan-id" column under "IP/Hotspot/Hosts" table
- winbox - do not show LACP related status parameters for other bonding types
- winbox - fixed default MTU value for CAP interfaces
- winbox - fixed minor typo in "Zerotier" menu
- winbox - improved handling of large WinBox protocol messages
- winbox - increased maximum number of Winbox read-only sessions 5->25
- winbox - properly save "Interfaces/Detect Internet/Detect Internet State" menu in session file
- winbox - removed bogus VRF tab from "Interface" menu
- winbox - show "Switch" menu on Chateau 5G ax
- winbox - show "Switch" menu on NetFiber 9
- winbox - show "System/Health/Settings" only on boards that have configurable values
- winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature
- winbox - show "USB Power Reset" menu on Chateau 5G ax
- winbox - show dynamic comment in WifiWave2 registration table
- wireless - fixed "nstreme" related parameter control in skins
- wireless - fixed setting of realms interworking parameter if realms-raw is unset
- x86 - added support for SUN 10G NICs
- x86 - improved igc driver support