cFosSpeed 歷史版本列表
更新時間：2020-04-21
更新細節：
What's new in this version:
Extensive re-write of the cFosSpeed core networking code:
- Special speed-up for pass-through LAN traffic (not traffic shaped)
- Designed to keep all out-of-band packet info intact, resulting in improved ad hoc VPN compatibility
- Improved analysis of networking edge cases
- Support for NDIS header/data split
- Additional speed improvements of Traffic Shaping path
- Support for Task Offloading: Checksum Offloading (IP and TCP/UDP), Large
- Segment Offloading and Receive Segment Coalescing
- With the new networking code cFosSpeed has only barely noticeable CPU load even at full blast 10 GBit/s LAN traffic!
- Added a new API to get current connections info, which is 20(!) times faster than the old one.
- The current connections dialog now displays a CPS history of the last 15 secs.
- If several routes to the Internet exist simultaneously, cFosSpeed can now use all of them for Traffic Shaping. This is especially useful if you have a balancing setup, e.g., one LAN adapter and one mobile adapter in use at the same time.
- Added new pingers: UDPv6. This should make cFosSpeed's pings even more stable.
- Removed "idle" class. Now every connection with set L7-protocol and known program name gets a class assigned right away.
- Added new "spd gset passthru" modes.
- All dialog pages are now integrated into the main navigation.
- Reaction time in RWIN expansion was speeded thus increasing throughput.
- Changed HTTP requests so they are hopefully more compatible with certain
- proxies.
- For click-through-auto mode, you can now configure the time needed to switch
- off click-through (the time you need to hover the mouse pointer over the
- cFosSpeed window).
- Added "spd flush_usage_logs". Speeded "spd flush".
- To save processing power, the cFosSpeed service now uses routing / address / interface change notifications to monitor route changes instead of a periodic timer.+ Optimized handling of how used programs are tracked and stored. It is now faster and more consistent.
- Used tech from cFos Personal Net to make the internal web server of the cFosSpeed service more responsive.
- "spd pcnt" will only work if new flag global_counters is set to 1. Enable it with "spd gset global_counters 1".
- Added time to "X" type line of metadata dump. This line is printed when a TCP or UDP connection is killed.
- cFosSpeed can now display a toast notification under Win 10 Build 17763+.
- A click on the new version update notification leads to our web page, where you can download the installation archive.
- By default, full screen detections requires that the full screen window is on the same monitor as the cFosSpeed status window. You can change it so full screen is detected even if the full screen window is on a different monitor than the cFosSpeed status window, by setting "per_monitor_fullscreen=0" in the file
- Added a setting where you can turn off full screen detection if the fullscreen window is not on the same monitor.
- Added IPv6 support for IPlists. The format is the same as for IPv4, just with IPv6 addresses instead. Since IPv6 addresses contain ':', it is assumed that Protowall format IPlists do not use ':' in the "name" portion. If that becomes a problem, use Emule format instead.
- cFosSpeed will only use the prefix, i.e., the upper 64 bits of an IPv6 address, since the lower 64 bits are the interface identifier and are entirely local.
- When the stored password to your license is lost or wrong, the screen that asks for it anew will now also accept your 30-char serial number, if that is how you got your key.
- Sometimes the language selected at installation time wasn't used in the demon. Likewise, a language change in the daemon would not change the language for the next installation. Fixed.
- Fixed a condition that could lead to starving TCP connections when RWIN expansion was used.
- Sometimes packets were leaked if expand_rwin was active, i.e., some packets were never freed. This lead to memory problems and hangs when uninstalling/ reinstalling cFosSpeed. This was a long-standing bug. Fixed.
- Fixed TCP connection problem on connections without TCP WSCALE if RWIN expansion was enabled.
- x Fixed bug in bulk detection: if downloading with HTTP, bulk streams would be
- re-classified as HTTP_C for a short time after each new GET. Fixed.
- x Fixed "spd tcb <remote wild>". You can specify a wildcard for the remote
- address:port pair. The wildcard is case-insensitive, IPv6 addresses
- are in "[]" and IPv6 addresses are written as short as possible (omitting
- leading zeros and using the "::" abbreviation.
- x Fixed a long-standing bug in RWIN expansion that could lead to slow
- connection setups.
- x When cFosSpeed was transferring lots of data, spd commands and current
- connections could sometimes answer very slowly. Fixed.
- x Fixed a display bug in "current connections" which didn't indicate user-
- changed prio.
- x Fixed bug which caused 100% load on one core.
- x Fixed a bug where the cFosSpeed status window would not regard the position
- of the system taskbar with auto-arrange. Thanks to George H.
- x Many of the fixes could only be done with help of many friendly users that
- send traces and dump files, like: ckcampbell1963, aleksxp, a11111135, Daniel
- Hänel, myfootstep, leozhdan, Priben Kranz, Drool and Contor. Thanks to you
- all!
- RWIN expansion will now by default negotiate windows that allow full blast
- downloads with an RTT of 200 ms. Change expand_rwin_dest_time if you want
- a different time.
- When allocating memory, only nonpaged memory will now be used. No more
- allocation and locking of paged memory is performed. This worked only
- very rarely anyway.
- Update to Visual Studio 2019.
- Removed variables mtu_limit, data_compression_*, vj_compression_*,
- fixed_speed and add_overhead_*.
- (Re)setting the prio class will now have immediate visual effect, even if
- there is no data on the connection.
- Support for Windows 19H2, November 2019 Update and Windows 19H1 (version
- 1903).
- Removed the option to disable the taskbar icon. You can use the Windows
- taskbar configuration dialog to hide the taskbar icon if you want.
- Removed WMI and keyboard LED support. All variables / values are available
- via our built-in web server
更新時間：2020-04-21
更新細節：
What's new in this version:
- Improved performance
- Added support for YouTube “Trending” and “News” top playlists
- SoundCloud search/playback fixed
- General bug fixes
更新時間：2019-03-21
更新細節：
What's new in this version:
- In the Prioritize Programs dialog you can now select to display the used programs only (instead of all programs)
- Settings.ini and thereby the list of default program priorities is now updated automatically. If you don't want this, delete the key named
'version' in the section [All] at the end of the file
- There is an option in the program update menu to enable / disable this automatic update
- Install and uninstall now also clean the driver store from cFosSpeed INF files. If an install is still unsuccessful or results in "driver not loaded" problems, you can run the installation, ignore errors and then run a deinstall. This should clean the driver store from old cFosSpeed INF files
- CFosSpeed now tracks the host name from HTTP, TLS and QUIC conenctions
It can be displayed with "spd cons -host". This will print the host name instead of the remote address. If you want both, use "-host2" or "-host -remote" instead
- Advanced connection overview (and "spd cons" as well) now only keeps one UDP pseudo-connection per DNS server. This prevents a load of UDP DNS Pseudo-connections that were just used for one DNS query
- Added installer checkbox to allow us to occasionally (max. once a year!)
- Collect some anonymous meta data from your connections (we clear out your IP address). This is to help us develop a new and improved form of traffic
- Class detection. Please switch it on, we need real live traffic data to develop this new feature.
Click-through now has its own sub-menu. You can now chose between "off", "click-through" (always) and "click-through (auto)". In auto mode, the window will change to click-opaque mode if you hover with your mouse cursor over it for 4 seconds (and will revert back to click-through mode if the cursor is not in the window for 4 seconds). So, if the skin window prevents you from interacting with other windows, you can use the click-
through mode. Thanks to Death_Master for the suggestion
- The list of used programs is now updated periodically and not only when the usage graph is opened
- Status window positions are now stored per network adapter, regardless of router MAC. This should eliminate confusion when the network adapter is used with different routers
- Improved usability of the context menu
- Advanced connection overview (and "spd cons" as well) is now by default sorted by protocol (first TCP, then UDP), then by local IP address:port, then remote. IPv4 is sorted in front of IPv6
- Added more games and other programs to the program prioritization UI
- Fixed and improved sorting in advanced connection overview: column "class" is now ordered by prio, "prot" by protocol/local/remote and the columns have a default order that makes sense (i.e., the most important at the top or alphabetical)
- The entries in the current connections dialog are now sorted according to their speed
- Skin window position is now stored relative to the nearest corner of the current monitor. Thereby the position is always fixed relative to that corner if you change monitor resolution
- CFosSpeed now tracks DUPACKs to be able to assess connection quality "spd ns" has now a row with "Duplicate ACKs" "spd cons" has now rows for tx'ed DUPACKs (an indicator for receive quality)
- And tx resends (an indicator for transmit quality)
- "spd cons" now accepts a "-head:" parameter to only print the first connections
- Optimized amount of in-flight data that cFosSpeed allows (sort of a global RWIN) for lower ping times. This should lower your ping times by about
30 msec if your are transferring data at the same time
- If low latency mode is switched on and non-cooperative mode is selected, CFosSpeed will act as if in cooperative mode, that is, we're trading
high bandwidth for low ping time
- CFosSpeed's foreground window detection will automaticall grant high prior to data from the current foreground process (as long as it's in the
Foreground). This could lead to the case where you upload/download and all that data is set to high, effectively congesting the whole line, even
for small high-prio data (like DNS or VoIP)
- This is now fixed: only non-bulk data from foreground processes is set to high and bulk data is now elevated to normal. That's still better than low, which is where is would normally go
- CFosSpeed version and build numbers are saved to registry to HKLMSOFTWAREcFoscFosSpeed
- When using "spd tcb" command you can now add a wildcard to specify which connection to display, like "spd tcb 8.*:80" or "spd tcb 8.*:*"
- Added new TCP counter in "spd netstat": Data segments. This will only be increased if the segment contains any data (i.e. is non ACK-only). It now allows for a more accurate calculation of resent percentage
- Added support for Windows 10 version 1803, a.k.a. Spring Creators Update, a.k.a. Redstone 4
- Added L7 detection of certain QUIC packets
- Improved evaluation of the User-Agent string for the L7 protocol detection
- The L7 protocol data field now contains the HTTP Host header field in addition to the Content-Type
- Improved "spd ports" display
- Fixed multiple bugs where the status window didn't re-open after hibernate/ sleep
- Fixed a bug where auto-hide on fullscreen hid the status window even if the fullscreen window was on a different monitor
- Fixed a bug in the update of used programs
- Actions on buttons in skin windows were disabled. Fixed.
- Fixed a bug where the program list in the add new program dialog was not updated correctly. Thanks to Tim M for reporting it
- Fixed a very old bug that could lead to a bluescreen in rare circumstances
- Thanks to Philippe Bertrand for dump file
- Fixed a possible deadlock (freeze)
- Improved dumping speed
- Clicking on the status windows turned off auto-arrange. Pressing ESC while moving the window did not restore it to the original position
- Fixed an old bug that could have lead to erroneous detection or rejection of RST segments in cFosSpeed
- Fixed constant deletion/creation and trace writing if VM virtual adapter switched his MAC adress on and off constantly
- Fixed a spurious problem with opening the browser
- Waldmann for bug report
- Fixed detection of IPv6 address of router
- When using "spd cons" or the advanced connection overview, the sorting will now sort TCP and UDP connections together
- Fixed detecion of UDP protocols
- Removed old, long unused code. Removed filter rules -ppp, -mp-header, mp-begin, -mp-end, -mp-frag, -pppp that were always false anyway (since CFosSpeed would never get PPP frames)
- Internal modernization of interlocked variables
- Tested with Windows 10 Octover 2018 Update, version 1809, codename redstone 5
- New SDK used. This includes mitigation against certain Spectre attacks
- Added / corrected several games in prioritization list. Thanks to Sc3ed
- Added some trace output to find a problem where LAN ports will open and close with a frequency of about 10 seconds. If this still happens to you,
please contact us!Switched to new compiler
- Traffic Shaping setting is now by default "not cooperative" owing to the fact that usually there are other non-cFosSpeed clients on the LAN as well (smartphones, consoles, etc.)
更新時間：2019-03-21
更新細節：
更新時間：2019-03-21
更新細節：
What's new in this version:
AVS Audio Editor 9.0.2.533
- Change log not available for this version
AVS Audio Editor 9.0.1.530
- Change log not available for this version
AVS Audio Editor 8.5.2.529
- Change log not available for this version
AVS Audio Editor 8.5.1.524
- Change log not available for this version
更新時間：2019-03-21
更新細節：
What's new in this version:
AVS Video Editor 9.0.2
- Change log not available for this version
AVS Video Editor 9.0.1
- Change log not available for this version
AVS Video Editor 8.1.2
- Change log not available for this version
AVS Video Editor 8.1.1
- Change log not available for this version
更新時間：2018-02-20
更新細節：
What's new in this version:
- Fixed "manual subnet override" feature
- Fixed a bug where cFosSpeed LAN port would appear and disappear every minute or so
- The link speed of the network adapter is now always the current link speed instead of the maximum link speed
- All links to www.cfos.de are now using HTTPS
- Corrected a lot of program classifications in settings.ini and added new popular games to settings.ini, so they can be prioritized by cFosSpeed accordingly. Thank you all for your suggestions in the prioritization dialog
- Switched to latest compiler
更新時間：2017-11-03
更新細節：
What's new in this version:
- Tested with Windows 10 Fall Creator's Update, a.k.a. Redstone 3
- Fixed the rare bluescreen with code IRQL_UNEXPECTED_VALUE (c8)
- Removed a now useless check for net_talk when using subnet_override feature
- Fixed handling of HTTP response codes 3xx in installer. This should avoid problems with users from esp. China when registering their keys.
- Changed method of Internet Connection Sharing activation used in Wi-Fi access points so it works again with Microsoft Windows 10 Build 15063 aka Creator's Update).
更新時間：2017-03-30
更新細節：
What's new in this version:
- The Metro skin now has a button in the right lower corner to toggle the current speed variables and the new current max speed variables. So you always can check what speed your connection achieved recently
- Added curr_max_rx and _tx variables that hold the current line speed, in contrast to maxrx, maxtxacked and maxtxraw that hold the maximum speeds ever achieved. These variables are also available for skins and WMI as curr_rx_scale and curr_tx_scale
- The "Add Program" dialog now lets you select between currently used programs and all programs you used
- Fixed empty values in usage graph, thanks to Stef
- Fixed help links in settings dialogs
- Fixed a possible CPU hog in the cFosSpeed service if adapters had empty names
- The "ProgramDatacFoscFosSpeedlogs" sub-directory wasn't created
- The list of used programs was not properly updated when adding a program to the program priority list. Fixed, thanks to Contor
- Fixed ping statistics dialog
- Fixed a caching problem with the new dialogs. The "restore defaults" button should now work again
- Fixed empty statistics values in the usage graph
- Internal changes for upcoming, new product feature
- Changed avg_time settings: 2 sec for the PPPoE/A, PPTP, AAL5 and VDSL modes, 4 sec for all others, including adaptive. This setting is the minimum time for speed measurements to calculate max speeds, so it evens out spikes in traffic speed
更新時間：2016-09-22
更新細節：
What's new in this version:
- Drivers are now signed by Microsoft, thus they should work even under the Anniversary Update of Windows 10, version 1607 (Redstone1). Plus they are signed by us with a EV certificate, so Windows SmartScreen always approves them as genuine.
- Changed the dialogs from HTA to normal HTML. Since they are displayed in the normal browser, they are much faster now.
- The "Add Program" feature in the program prioritization dialog now only takes .exe files, which are currently used for data transmission. This prevents a lot of .exe files entered into the prioritization which never actually transfer data. As a consequence you need to run the program which you want to prioritize in order to appear in the list.
- Fixed IP block list handling in new dialogs.
- Fixed missing text in dialog.
- Due to browser security, the IP blocklist in the dialog is now hard- coded to blocklist.txt in c:programdatacfoscfosspeed. You can still use other names or directories if you change the user.ini file manually.
- Switched to Visual Studio 2015 Update 3.