Bandicam 歷史版本列表
更新時間：2018-02-27
更新細節：
What's new in this version:
New Features:
- Added 64-bit support for Mac and Windows
- Updated look with new colours and scalable interface
- Added Practice Mode - test your mix without hardware connected
- Added 'Hi-Res Screen Display' option - Display in high resolution on Retina, 4K and HD monitors
- Added new 'Help' menu including Support Knowledge Base search
- Added 'Performance Pad Cue Layout' option
- Added headphone PFL 'Auto Cue' option (for supported controllers only)
Other Changes:
- Added play/pause keyboard shortcuts for Practice Mode - [Space] for left deck, [Enter] for right deck
- Added support for 'iTunes Library.xml' - If no iTunes Music Library.xml is found it will look for a iTunes Library.xml instead
- Changed audio decoding from video files (previously Quicktime) to the native OS decoder
- Added Mix + Mic + TR recording options for the Roland DJ-202
- Added 'Clean Echo Out' for Wolf Pack FX pack
- Set Temp Cue logic updated
- Fixed Favourite FX list not saving between sessions
- Fixed Ctrl+Z not working correctly in Offline player
- Fixed 'Error Communicating with device' message showing when DDJ SR2 is connected
- Fixed Windows DPI scaling restricting application from opening due to minimum screen resolution
- Fixed Analysis Settings popup not allowing tooltip to be open at the same time
- Fixed an issue where the Roland DJ-808 could not connect to Serato DJ on macOS High Sierra
- Fixed a potential hang when connecting Rane SL4 with no drivers installed
- Fixed 'Error Communicating with device' error message showing when connecting Pioneer DJ DDJ-SR2
- Fixed Roland TR-S not correctly aligning with the beatgrid
- Fixed Temp Cue not drawing at correct position when the beatgrid is at a negative value
- Fixed Temp Cue remaining after track is ejected
- Fixed Temp cue jumping to start of active loop
- Fixed cursor flickering while dragging from Deck/Sample slot (MacOS)
- Fixed Play From Start not being respected when Sticker Lock is enabled
- Fixed album art box being too long in horizontal and vertical view
- Fixed an issue where the album art would stay visible
- Fixed track starting from playhead position of last loaded track when no song load options are set
- Fixed an issue being unable to jump to a letter when inside a crate
- Fixed an issue turning MIDI output lighting ON when mapping Sync
- Fixed a possible dropout switching between Fav FX banks before FX are turned on
- Fixed MIDI Output lighting not toggling for Sampler midi mappable controls
- Fixed MIDI Mapped Video upfader not working unless upfader link is enabled
- Fixed Sampler panel height not returning correctly when closed
- Fixed bloated iTunes XML causing a crash
- Fixed a potential crash when resizing application window continuously
- Fixed a potential crash on exit
- Updated the auto backup message on exit screen
- Updated various tooltips and translations
- Updated application icons
更新時間：2018-01-30
更新細節：
What's new in this version:
Bandicam 4.1.1 Build 1371
- The .mp3 codec is available with an .AVI container
- Added an option, "Play mouse click sounds while recording"
- Added an option, "Play sound effects when started or stopped"
Bugs fixed:
- The webcam preview showed a black screen while recording in some games (Rage, etc.)
- The HDYC colorspace input couldn't record in Device Recording Mode
- A memory leak occurred when hooking DirectX 11 games/applications in Game Recording Mode
- Bandicam stopped working when changing the display settings (resolution, main monitor) in 'Screen Recording Mode
- Other minor bugs fixed
Bandicam 4.1.0 Build 1362
- The webcam preview function is now available in Screen Recording Mode
- The webcam preview function is now available in Device Recording Mode
- Added support for resizing the mouse cursor, the mouse click effect and the mouse highlight effect
- Added support for the preview of the mouse effect settings
Bugs fixed:
- The recorded video was garbled when the 'Prefer RGB colorspace' option was used for the External codec
- The 'Run Bandicam on Windows startup' option didn't work in Non-Admin mode of Bandicam (bdcam_nonadmin.exe)
- Other minor bugs fixed
Bandicam 4.0.2 Build 1352
- Bandicam is now able to add a logo to the captured images
- Bandicam is now able to set the quality of JPEGs
- Improved the webcam preview UI in the webcam overlay menu
- Added support for the "HDYC colorspace" in Device Recording Mode
- Bandicam did not terminate automatically while Windows was shutting down after the Windows 10 Fall Creators update
- Other minor bugs fixed
Bandicam 4.0.1 Build 1339
- Added the Facebook upload function (How to upload a video to Facebook)
- Fullscreen mode: Added the pin icon to show/hide the recording control bar
- Fullscreen mode: Added the opacity adjustment function
- Fullscreen mode: Bandicam now shows the display number in the recording information status line
- Added the Khmer(Cambodian) language file by touch sovannara
- Bugs fixed ◦The taskbar was not recorded when using the around mouse screen recording mode
- Other minor bugs fixed
Bandicam 4.0.0 Build 1331
- Change log not available for this version
Bandicam 4.0.0 Build 1330
- Applied new UI design for Bandicam 4.0
- Added support for the "new Fullscreen" recording mode
- Added support for the "Around Mouse" recording mode
- Added the 'bdcam_nonadmin.exe' file which allows non-admin users (standard users) to use Bandicam without administrator privileges
- Added support for text input in the drawing function
- Added the "Get Started" menu for beginners
- Added the Belarusian, Burmese language files
- The mouse cursor/effect settings status is displayed on the main window
- The microphone settings status is displayed on the main window
- Improved the switching speed to Game Recording Mode
- The maximum length of the format/size preset name is limited to 100 characters
- The DPI scaling of the rectangle window and device recording window is adjusted automatically according to the Bandicam main window
Bugs fixed:
- The bdcam64.bin process remained after crashing
- The record button was not active after the Auto Complete Recording function was used
- A file dragging bug of the video/image file list has been fixed
- Other minor bugs fixed
Bandicam 3.4.4.1264
- Improved the hooking stability of DirectX 12 games (Tom Clancy's The Division)
Bugs fixed:
- Failed to start recording or take a screenshot on some computers
- Other minor bugs fixed
Bandicam 3.4.3.1262
- Improved AMD APP H.264 codec recognition of AMD RX 460/470/480
Bugs fixed:
- The YouTube upload function didn't work properly on some computers
- Other minor bugs fixed
Bandicam 3.4.2.1258
- The webcam preview was upside down in Game Recording Mode with some webcam devices
- Other minor bugs fixed
Bandicam 3.4.1.1256
- Improved the stability of the Intel Quick Sync Video encoder
- Improved the recording performance of the webcam overlay
- Bandicam is now able to save a webcam overlay video in 60FPS (while saving the webcam overlay video as a separate file)
- The default recording time for Auto Complete Recording has changed from 10 minutes to 60 minutes
- The default rectangle size for screen recording has changed from 640x480 to 1280x720
Bugs fixed:
- Failed to use the webcam recording function while ESET AntiVirus was running
- The input format of a specific webcam device wasn't applied to the webcam overlay function
- The Drawing mode menu was disabled while not recording
- Other minor bugs fixed
Bandicam 3.4.0.1227
- Bandicam is now able to add numbers to highlight steps of video tutorials
- Bandicam is now able to draw arrows with customized colors and sizes
- Improved the real-time drawing function
- The real-time drawing feature can be used in a moving video
- The drawing feature can be used when capturing images
- Added a new size preset (1920x1080) on the rectangle window
- Separated the FPS position hotkey and the FPS show/hide hotkey
- Improved the writing efficiency of PCM audio data with the .avi container
Bugs fixed:
- RGB24 codec resulted in quality loss in the registered version
- External codec which supports RGB input such as MagicYUV, Lagarith, x264 resulted in quality loss
- Bandicam crashed when the smallest size was selected and the H264(CPU) codec was used in Screen Recording Mode
- Other minor bugs fixed
Bandicam 3.3.3.1209
- Added the "Prefer RGB colorspace" option for the External codec - VFW (Video for Windows)
- Added the command line for license registration
- Registration from the setup file: bdcamsetup.exe /S /reg email serial#
- Registration from the program file: bdcam.exe /reg email serial#
- Improved the "Open output folder" function on the context menu in the Output tab
- Improved security of Bandicam installer (DLL Hijacking)
- Bandicam now doesn't allow the user to enter the same preset name in the format and position/size preset settings
Bugs fixed:
- The preset name in the format and position/size preset settings couldn't be edited/deleted
- Specific data of large AVI files was broken (Around 150 GB or bigger files)
- Other minor bugs fixed
Bandicam 3.3.2.1195
- NVENC encoder could not be detected on some computers when the Nvidia Geforce 378.49 driver was installed
- Other minor bugs fixed
Bandicam 3.3.1.1192
- Change log not available for this version
Bandicam 3.3.1.1191
- Bandicam is now able to save videos and images into different folders
- Added the 'Mono' option for professional mono devices/microphones
Bugs fixed:
- The 'Failed to initialize codec' error occurred when the NVENC codec was used on some games (Outlast)
- The Keyframe interval function of the H264 (CPU) encoder didn't work properly
- The webcam preview function didn't work properly on some games. (GTA: San Andreas)
- Other minor bugs fixed
Bandicam 3.3.0.1175
- Bandicam is now able to record Vulkan games/programs (Dota 2, Doom, etc.)
- Improved the DirectX 11 hooking compatibility
- Improved the DirectX 9 hooking compatibility (PlanetSide 2)
- Improved the MJPG format compatibility with the 'Device Recording Mode'
- Improved AMD APP H.264 codec recognition of AMD Radeon R series
- Bandicam now supports 60FPS for webcam recording (Logitech C922 Pro)
- Bandicam now prevents the computer from sleeping while the preview window of the 'Device Recording Mode' is full screen
- Bandicam now hides the mouse cursor if the preview window of the 'Device Recording Mode' is full screen
Bugs fixed:
- Frames were skipped if a user set a high bitrate on AMD APP H.264 encoder
- Bandicam stopped working when a frame was not updated in 'Screen Recording Mode' under certain conditions
- The Keyframe interval function of NVIDIA® NVENC/HEVC encoder didn't work properly
- Some registry entries remained after uninstallation
- Other minor bugs fixed
Bandicam 3.2.5.1125
- The maximum FPS has changed from 120 to 144
- Improved the hooking compatibility with BlueStacks
- Improved the hooking compatibility with Forza Horizon 3
- [Fix] Computer stopped working after hooking Windows Store apps/games under certain situations
Bandicam 3.2.4.1118
- Improved the DirectX 12 hooking compatibility with AMD Radeon graphics cards
- The hooking function didn't work on some computers if the "Windows Store Apps (UWP)" option was checked
- Other minor bugs fixed
更新時間：2018-01-18
更新細節：
What's new in this version:
- Solved audio issues with external sources (Line-in, Live Commentary, Sound Capture)
- Capturing audio from line-in is working again for HD60 Pro
- HD60 Pro captures 25/30 fps recordings at the desired bit rate now
- New drivers for HD60 S and HD60 Pro solve signal detection issues for certain displays
更新時間：2017-12-21
更新細節：
What's new in this version:
Bandicam 4.1.0 Build 1362
- The webcam preview function is now available in Screen Recording Mode
- The webcam preview function is now available in Device Recording Mode
- Added support for resizing the mouse cursor, the mouse click effect and the mouse highlight effect
- Added support for the preview of the mouse effect settings
Bugs fixed:
- The recorded video was garbled when the 'Prefer RGB colorspace' option was used for the External codec
- The 'Run Bandicam on Windows startup' option didn't work in Non-Admin mode of Bandicam (bdcam_nonadmin.exe)
- Other minor bugs fixed
Bandicam 4.0.2 Build 1352
- Bandicam is now able to add a logo to the captured images
- Bandicam is now able to set the quality of JPEGs
- Improved the webcam preview UI in the webcam overlay menu
- Added support for the "HDYC colorspace" in Device Recording Mode
- Bandicam did not terminate automatically while Windows was shutting down after the Windows 10 Fall Creators update
- Other minor bugs fixed
Bandicam 4.0.1 Build 1339
- Added the Facebook upload function (How to upload a video to Facebook)
- Fullscreen mode: Added the pin icon to show/hide the recording control bar
- Fullscreen mode: Added the opacity adjustment function
- Fullscreen mode: Bandicam now shows the display number in the recording information status line
- Added the Khmer(Cambodian) language file by touch sovannara
- Bugs fixed ◦The taskbar was not recorded when using the around mouse screen recording mode
- Other minor bugs fixed
Bandicam 4.0.0 Build 1331
- Change log not available for this version
Bandicam 4.0.0 Build 1330
- Applied new UI design for Bandicam 4.0
- Added support for the "new Fullscreen" recording mode
- Added support for the "Around Mouse" recording mode
- Added the 'bdcam_nonadmin.exe' file which allows non-admin users (standard users) to use Bandicam without administrator privileges
- Added support for text input in the drawing function
- Added the "Get Started" menu for beginners
- Added the Belarusian, Burmese language files
- The mouse cursor/effect settings status is displayed on the main window
- The microphone settings status is displayed on the main window
- Improved the switching speed to Game Recording Mode
- The maximum length of the format/size preset name is limited to 100 characters
- The DPI scaling of the rectangle window and device recording window is adjusted automatically according to the Bandicam main window
Bugs fixed:
- The bdcam64.bin process remained after crashing
- The record button was not active after the Auto Complete Recording function was used
- A file dragging bug of the video/image file list has been fixed
- Other minor bugs fixed
Bandicam 3.4.4.1264
- Improved the hooking stability of DirectX 12 games (Tom Clancy's The Division)
Bugs fixed:
- Failed to start recording or take a screenshot on some computers
- Other minor bugs fixed
Bandicam 3.4.3.1262
- Improved AMD APP H.264 codec recognition of AMD RX 460/470/480
Bugs fixed:
- The YouTube upload function didn't work properly on some computers
- Other minor bugs fixed
Bandicam 3.4.2.1258
- The webcam preview was upside down in Game Recording Mode with some webcam devices
- Other minor bugs fixed
Bandicam 3.4.1.1256
- Improved the stability of the Intel Quick Sync Video encoder
- Improved the recording performance of the webcam overlay
- Bandicam is now able to save a webcam overlay video in 60FPS (while saving the webcam overlay video as a separate file)
- The default recording time for Auto Complete Recording has changed from 10 minutes to 60 minutes
- The default rectangle size for screen recording has changed from 640x480 to 1280x720
Bugs fixed:
- Failed to use the webcam recording function while ESET AntiVirus was running
- The input format of a specific webcam device wasn't applied to the webcam overlay function
- The Drawing mode menu was disabled while not recording
- Other minor bugs fixed
Bandicam 3.4.0.1227
- Bandicam is now able to add numbers to highlight steps of video tutorials
- Bandicam is now able to draw arrows with customized colors and sizes
- Improved the real-time drawing function
- The real-time drawing feature can be used in a moving video
- The drawing feature can be used when capturing images
- Added a new size preset (1920x1080) on the rectangle window
- Separated the FPS position hotkey and the FPS show/hide hotkey
- Improved the writing efficiency of PCM audio data with the .avi container
Bugs fixed:
- RGB24 codec resulted in quality loss in the registered version
- External codec which supports RGB input such as MagicYUV, Lagarith, x264 resulted in quality loss
- Bandicam crashed when the smallest size was selected and the H264(CPU) codec was used in Screen Recording Mode
- Other minor bugs fixed
Bandicam 3.3.3.1209
- Added the "Prefer RGB colorspace" option for the External codec - VFW (Video for Windows)
- Added the command line for license registration
- Registration from the setup file: bdcamsetup.exe /S /reg email serial#
- Registration from the program file: bdcam.exe /reg email serial#
- Improved the "Open output folder" function on the context menu in the Output tab
- Improved security of Bandicam installer (DLL Hijacking)
- Bandicam now doesn't allow the user to enter the same preset name in the format and position/size preset settings
Bugs fixed:
- The preset name in the format and position/size preset settings couldn't be edited/deleted
- Specific data of large AVI files was broken (Around 150 GB or bigger files)
- Other minor bugs fixed
Bandicam 3.3.2.1195
- NVENC encoder could not be detected on some computers when the Nvidia Geforce 378.49 driver was installed
- Other minor bugs fixed
Bandicam 3.3.1.1192
- Change log not available for this version
Bandicam 3.3.1.1191
- Bandicam is now able to save videos and images into different folders
- Added the 'Mono' option for professional mono devices/microphones
Bugs fixed:
- The 'Failed to initialize codec' error occurred when the NVENC codec was used on some games (Outlast)
- The Keyframe interval function of the H264 (CPU) encoder didn't work properly
- The webcam preview function didn't work properly on some games. (GTA: San Andreas)
- Other minor bugs fixed
Bandicam 3.3.0.1175
- Bandicam is now able to record Vulkan games/programs (Dota 2, Doom, etc.)
- Improved the DirectX 11 hooking compatibility
- Improved the DirectX 9 hooking compatibility (PlanetSide 2)
- Improved the MJPG format compatibility with the 'Device Recording Mode'
- Improved AMD APP H.264 codec recognition of AMD Radeon R series
- Bandicam now supports 60FPS for webcam recording (Logitech C922 Pro)
- Bandicam now prevents the computer from sleeping while the preview window of the 'Device Recording Mode' is full screen
- Bandicam now hides the mouse cursor if the preview window of the 'Device Recording Mode' is full screen
Bugs fixed:
- Frames were skipped if a user set a high bitrate on AMD APP H.264 encoder
- Bandicam stopped working when a frame was not updated in 'Screen Recording Mode' under certain conditions
- The Keyframe interval function of NVIDIA® NVENC/HEVC encoder didn't work properly
- Some registry entries remained after uninstallation
- Other minor bugs fixed
Bandicam 3.2.5.1125
- The maximum FPS has changed from 120 to 144
- Improved the hooking compatibility with BlueStacks
- Improved the hooking compatibility with Forza Horizon 3
- [Fix] Computer stopped working after hooking Windows Store apps/games under certain situations
Bandicam 3.2.4.1118
- Improved the DirectX 12 hooking compatibility with AMD Radeon graphics cards
- The hooking function didn't work on some computers if the "Windows Store Apps (UWP)" option was checked
- Other minor bugs fixed
更新時間：2017-12-21
更新細節：
What's new in this version:
- The webcam preview function is now available in Screen Recording Mode
- The webcam preview function is now available in Device Recording Mode
- Added support for resizing the mouse cursor, the mouse click effect and the mouse highlight effect
- Added support for the preview of the mouse effect settings
Bugs fixed:
- The recorded video was garbled when the 'Prefer RGB colorspace' option was used for the External codec
- The 'Run Bandicam on Windows startup' option didn't work in Non-Admin mode of Bandicam (bdcam_nonadmin.exe)
- Other minor bugs fixed
更新時間：2017-11-21
更新細節：
What's new in this version:
- Bandicam is now able to add a logo to the captured images
- Bandicam is now able to set the quality of JPEGs
- Improved the webcam preview UI in the webcam overlay menu
- Added support for the "HDYC colorspace" in Device Recording Mode
Bugs fixed:
- Bandicam did not terminate automatically while Windows was shutting down after the Windows 10 Fall Creators update
- Other minor bugs fixed
更新時間：2017-11-07
更新細節：
What's new in this version:
- First build supporting 4K60 Pro
- Game Capture now supports the all new 4K60 Pro. Please note, when using 4K60 Pro with Game Capture, recording and streaming will be limited to 1080p60. Want to capture content in up to 2160p60? Of course you do! Then please download our new 4K Capture Utility, developed from the ground up to support a 4K workflow
更新時間：2017-10-24
更新細節：
What's new in this version:
- This update includes a new HD60 Pro driver for improved support of the Windows 10 Fall Creators Update. Please make sure to install this version of Game Capture before updating Windows.
更新時間：2017-09-29
更新細節：
What's new in this version:
- Added the Facebook upload function. (How to upload a video to Facebook)
- Fullscreen mode: Added the pin icon to show/hide the recording control bar
- Fullscreen mode: Added the opacity adjustment function
- Fullscreen mode: Bandicam now shows the display number in the recording information status line
- Added the Khmer (Cambodian) language file by touch sovannara
Bugs fixed:
- The taskbar was not recorded when using the around mouse screen recording mode
- Other minor bugs fixed
更新時間：2017-08-30
更新細節：
What's new in this version:
- Eliminated an application crash that sometimes occurred after long recording sessions with Live Commentary enabled