Avira Antivirus Pro 歷史版本列表
更新時間：2021-01-26
更新細節：
What's new in this version:
Added:
- support of NVIDIA GeForce GT 1010
- support of NVIDIA GeForce RTX 3080 Laptop, RTX 3070 Laptop and RTX 3060 Laptop
- old Radeon R5 Stoney support
Fixed:
- detection of NVIDIA Quadro P620
- number of TMUs for a Radeon RX 580 (deviD: 67df, sub dev: E3661DA2)
Updated:
- TDP for some Tiger Like H45 GPUs
- GPU Shark 0.22.0.0
- with latest GeeXLab SDK libs (GeeXLab 0.40.0)
- with NVAPI R460
更新時間：2021-01-26
更新細節：
What's new in this version:
Fixed:
- Defender control doesn’t work properly when Tamper Protection is active
- ID Protection prevent to use Defender contol on multiple pc (ID Protection removed)
- GUI Font is too small
Added:
- The / q parameter has been added. Status information can be obtained with Exit code
- Some code improvements
更新時間：2021-01-26
更新細節：
What's new in this version:
Jottacloud 3.2.101.1079
- Change log not available for this version
Jottacloud 3.2.100.1077
- Added support for custom messages
Jottacloud 3.2.99.1074
- Changed login to use the default browser instead of embedded browser
- Added support for macos Big Sur
- Fixed a bug causing backup errors to not always be displayed in the ui
- Fixed a crash on Mac OS X
Jottacloud 3.2.94.1022
- Fixed a bug sometimes causing incorrect excludes on windows
Jottacloud 3.2.93.1020
- Fixed an issue with bandwith limits during upload
Jottacloud 3.2.91.1015
- Fixed a bug causing a crash when scanning very active folders
- Fixed a bug causing a broken state when pausing the client at an inopportune moment
- Fixed a few translations
- Reduced the minimum size of the main ui to accomodate smaller screens
- Improved rate controll for uploads
- Increased bandwith-slider scale
Jottacloud 3.2.90.974
- Fixed a bug where upload errors would not always display in the ui
- Fixed a bug where conflicted sync files with certain characteres in the filename would cause sync to stop
Jottacloud 3.2.89.967
- Added "Share file..." to windows explorer context menu
- Fixed a crash when opening a file-detail-dialog on some search results
Jottacloud 3.2.88.956
- Fixed a bug where the client could get stuck in an "unconnected" state after frequent network status changes
- Fixed a bug where a suspended backup folder could be scanned
- Fixed a crash that could occur when using upload rate limiting
Jottacloud 3.1.65.635
- Removed Latest and Links from Restore tab
- Added Photos to Restore tab
- Changed default permissions for sync folder. Not retroactive.
- Improved a few translations
- Improved conflicted file naming
- Fixed a false positive conflict
- Fixed an issue where the client would not reconnect its websocket properly
- Fixed an issue where the tray's help submenu could become corrupted
- Fixed an issue where the checksum thread could get stuck in infinite retry loop
- Fixed a crash related to upload error retries
- Fixed a crash related to bad timing of scan thread start/stop messages
更新時間：2021-01-26
更新細節：
What's new in this version:
NetSetMan 5.0.4
Fixed:
- Profile activation didn't use recent modifications of IPs in UI
- Error 1219 with connected network paths without a drive letter
- Incompatibility with another software prevented profile activation
- IPv6 activation error prevents further activation of settings
- New SMTP configurations were not saved correctly
- High-DPI adjustments for dialogs and tabs
- (Pro): License registration issues in rare constellations
- Translation updates, fixes and adjustments
- Minor fixes and adjustments
NetSetMan 5.0.3
Fixed:
- Connecting net drives with user name and password failed
- Connecting to WiFi network by MAC address
- Saving a WiFi profile without encryption
- Settings in a profile without a selected NIC were not saved
- Incorrect tray icon animation after command line activation
- High-DPI issues with checkboxes
- (Pro): Firefox profile file might not have been found
- Command line activation now updates the active profile in an
- already running instance of the application
- Tray-Info now marks network adapters that are disconnected
- Minor fixes and adjustments
NetSetMan 5.0.2
Fixed:
- Fix: Deleting a profile while it's being renamed
- Fix: File dialog failed if file extensions were hidden in Explorer
- Fix: Configuration of first gateway metric was always reset to 0
- Fix: Profile activation on Windows logon screen
- Fix: WiFi connection error 5023 in certain constellations
- Fix: License text in preferences could be missing
- Fix (Pro): Double-click on license button opens dialog twice
- Language updates
NetSetMan 5.0.1
Fixed:
- Fix: Mobile NICs could missing in the network adapters list
- Fix: Displayed information partially incorrect for newly available update
- Fix: After using auto-update there was no automated program restart
- Fix (Pro): Autorun was added twice
- Fix (Pro): Multiple License registration issues
NetSetMan 5.0.0
New:
- Profile Management in Profile Tree:
- Easier handling of profiles and groups in a tree structure
- Drag&drop, copy&paste, multi-select, nested group hierarchy
- Tooltips for profile settings, notes and AutoSwitch conditions
- Searching/filtering profiles and groups
- NC-Freeware can now also use groups and up to 8 profiles
- Settings file format is now XML instead of INI:
- No more limitation of exactly 6 profiles per group
- Profile groups can now be nested within each other
- "Atomic saving" prevents file corruptions even during system crash
- Carefully modernized UI retaining the familiar usability:
- Resizable window with additional profile overview at a certain width
- Vertical menu for quick access to the main parts of the application:
- Network profiles, WiFi Management, Network Tools and AutoSwitch
- AutoSwitch can now be configured directly in each profile
- Activation dialog displays all setting details that are applied
- Dialogs can contain formatted text, images and links
- IPv6 and WINS have been moved to the Advanced TCP/IP dialog (IP+)
NetSetMan WiFi Management:
- Recreated from scratch, removing all previous limitations and errors
- Additional info: MAC, channel, speed, protocols, etc.
- Optional descriptions and colors for important wireless networks
AutoSwitch Overview:
Modernized Tray-Info:
- Modern design with glass/acrylic background and user color scheme
- Can be displayed as an overlaying dialog with selectable text
- Customizable content and zoom level with live preview
- Content is automatically updated every 5 seconds
- Modern high resolution icon images:
- Almost 200 images recreated to support high-DPI screens
- New NetSetMan logo!
- Auto-Update for downloading and installing new versions
- Automatic Network Adapter Management
- List with available NICs is automatically updated at program start
- Structured list with hardware, virtual and generic NICs
- "Dynamic LAN/WiFi adapter" to auto-select a NIC at profile activation
- High-DPI compatibility with multi-monitor support
- Network bridges are now better supported
- Extended NetSetMan Administration with more options
- Multiple profiles can be activated with one command line call
- Command line activation now accepts profile names and even place holders
- Improved security with custom file dialog
- Lots of usability improvements, additional options and fixes
- Compatibility for Windows 10 version 20H2
Important / breaking changes:
- Dropping support for XP (incompatible) and Vista (untested)
- Due to outdated APIs, these EOL Windows versions are no longer supported
- If you are on Windows Vista or older, please keep using NetSetMan 4.x
- Settings file format and name changed from settings.ini to netsetman.xml
- If you are accessing the file from a script, you will need to update it
- Command line activation requires a new type of profile ID (see help file)
- Due to the changed file structure, previous IDs have been replaced by GUIDs. Copy them from tree context menu or directly from XML file
Some outdated translations have been removed:
- Danish, Georgian, Hebrew, Indonesian, Malay, Swedish, Turkish, Vietnamese
- Temporarily: Greek, Portuguese (Brazil), Ukrainian
- If you would like to continue one of the languages and become an
- official volunteer translator, please contact us
NetSetMan 4.7.2
- Compatibility for Windows 10 version 1909
- Fix: Buffer Overflow vulnerability in Workgroup feature
- Fix: DEP key in WiFi Management was missing the last character
- Fix: VPN profile recognition for some third party VPN clients
- Fix: Accessing private VPN profiles with a restricted user account
- Fix (Pro): Repeated license activation in some cases
- Fix (Pro): Command line uninstallation with enabled NSM Administration
- Fix (Pro): License deregistration issue in rare cases
NetSetMan 4.7.1
- Compatibility for Windows 10 version 1803
- Fix: Exception errors with new TCP/UDP-Connections feature on some systems
- Fix: High-DPI adjustments for TCP/UDP-Connections toolbar and icons
- Minor bug fixes and improvements
NetSetMan 4.7.0
- NEW Tool: TCP/UDP Connections (IPv4 & IPv6)
- Windows Tools menu items can now be disabled in NSM Administration
- Tool "Adapters Details" now shows modified and original MAC addresses
- Fix: Version 4.6 had multiple issues with Windows XP
- Fix: Network Scanner remained enabled in Compact Mode even if
- NSM Tools were disabled in NSM Administration
- Fix: Reassigning NICs in AutoSwitch conditions for copied ini file
- Fix: Combining multiple error messages in NSM WiFi Management
- Fix: Global AutoSwitch options remained active with disabled AutoSwitch
- Fix: Error message in System Settings when changing the computer name
NetSetMan 4.6.1
- Activation log shows assigned IP addresses when DHCP was set
- Skipping activation of settings if they are currently already set
- (To force re-initializing IP settings, set Adapter Status: Restart)
- "Waiting for network" only if there are other settings following
- "No network adapter selected" only shown if relevant in that profile
- Several improvements for command line activation
- Fix: LAN/Adapter settings showed an error even if completed successfully
- Fix: Incorrect value for "Enabled" status in Tools: Adapters Details
- Fix: Activation order when connecting to a WiFi network and restarting NIC
- Fix: Error 7000000F for WiFi connection if NIC not ready after changing IP
- Fix: Format of some details in the activation log
- Fix: Reading current Gateway value didn't work in certain cases
- Fix: Show only one System Up-Time in TrayInfo if Boot Time = Work Time
- Fix: Rare problem with -aw/-ah command line parameters
- Fix (Pro): Firefox Proxy option "Same proxy for all protocols"
- Fix (Pro): Cancelling profile activation while waiting for FF
NetSetMan 4.6.0
- NEW: "Public DNS Servers" list for quick access from the DNS context menu
- Prefilled with the most common DNS servers, but fully customizable
- New method for the IPv6 feature for reading the current addresses
- Compatibility for Windows 10 version 1709 ("Fall Creators Update")
- Fix: WiFi debug file removed
- Fix: Skip delay if a program that is set to "Run once" is already running
- Fix: MAC address format in LAN/Adapter dialog
- Fix (Pro): Updating prepared NICs in settings file with NICLabel only
- Lots of minor fixes and adjustments
NetSetMan 4.5.1
- Network Scanner Additionally to the built-in MAC-OUI vendors list selection, you can now place the official oui.txt from ieee.org in the program folder to get the complete OUI data.
- New "Programs" option for preventing multiple instances of the same exe
- Built-in MAC-OUI vendor now also displayed in NIC and WiFi Management
- Improved Network Scanner results for low-energy target devices
- Ping network packets are now identical to Windows pings
- AutoSwitch info dialog UI improved
- Increased compatibility for Speed/Duplex, MTU, Flow Control, VLAN ID
- Fix Displaying incorrect context menu for IP input fields
- Fix Console-Tool with non-Latin characters
- Fix (Pro) Rare problem with command line license installation
- Fix (Pro) Problem with portable mode in certain constellations
NetSetMan 4.5.0
- NEW Tool: Network Scanner
- Scan networks by IP range (IPv4 & IPv6), subnet (CIDR), ARP & NDP cache
- Get details like name, MAC, domain/workgroup, OS, network shares, etc.
- Multithreading for scanning large numbers of IPs simultaneously
- Highly compatible and flexible by using new and old protocols
- Copy details, open targets, export results, send Wake-On-LAN
- Favorites list for customizing frequently used targets
- Detailed information of network printers (shared or directly connected)
- Real-time search filter for all results
- Fix: Some setup parameters have been ignored
- Fix: Minimizing application didn't save profile changes
- Fix: Pressing ENTER in IP fields resulted in an error message
- Fix: High-DPI problems (query dialogs, AutoSwitch menu items click area)
- Fix: Firefox Proxy is now also available for user-specific installations
- Fix: Autorun in Preferences dialog not showing its state correctly
- Fix: Multiple memory leaks
- Tool "Adapters Details" is now sorted by type and name
- Lots of minor fixes and adjustments
更新時間：2020-12-30
更新細節：
更新時間：2020-12-11
更新細節：
What's new in this version:
- Added support of AMD Radeon RX 6900 XT
- Updated: GPU Shark 0.21.2.0
- Updated with latest GeeXLab SDK libs (GeeXLab 0.39.1.0)
- Updated: ZoomGPU 1.28.3 (GPU monitoring library)
更新時間：2020-12-08
更新細節：
What's new in this version:
- added support of more GeForce GTX 1650 / GTX 1650 Ti
- added support of NVIDIA Quadro P620
- added more Intel Tiger Lake (GT1) GPUs
- updated: GPU Shark 0.21.1.0
- updated: ZoomGPU 1.28.2 (GPU monitoring library)
更新時間：2020-12-03
更新細節：
What's new in this version:
- added support of NVIDIA GeForce RTX 3060 Ti
- updated: GPU Shark 0.21.0.0
- updated: ZoomGPU 1.28.1 (GPU monitoring library) with NVAPI R455
更新時間：2020-12-02
更新細節：
What's new in this version:
- IntelliJ IDEA 2020.3 offers a multitude of useful features, like interactive hints while debugging, Git staging support, extended support for Java 15 records and sealed classes, and more. It simplifies your daily work with endpoints, frameworks, and the profiler. The overall UX has been improved with better code completion based on machine-learning technology, a more intuitive and useful new Welcome screen, and better spelling and grammar checks. In short, everything about it is better
In this post we will give you quick update of all the major features and improvements you need to know about in v2020.3:
Editor:
- When you want to rename occurrences, you can now choose whether to do so in comments and string literals or in printable text
- You can organize tabs more easily by dragging and dropping them to divide the editor horizontally or vertically. We’ve also added the Open in Right Split action, which divides the editor vertically when you open another file
- It’s easier to organize your pinned tabs. You can drag and drop files to add them to the pinned tabs. Additionally, you can keep all the pinned tabs in a separate row
- You can set IntelliJ IDEA as the default application for opening certain file types
- It is now possible to add a template that creates several files. Inside the template, you can enter a pattern to generate a file name and a path
- We’ve improved Markdown formatting, synced the preview and editor, and added support for Mermaid.js
User Experience:
- The new Welcome screen includes four new tabs – one for managing projects, one for configuring the IDE interface, one for installing plugins, and one for learning how to use IntelliJ IDEA more effectively
- The Learn IntelliJ IDEA tab on the Welcome screen provides access to interactive courses that will help you learn about the features in IntelliJ IDEA using actual code samples
- It is possible to sync your IDE and OS themes
- We’ve added Reader mode for read-only files and files from External Libraries. It is now easier to read comments in such files
- You can open files in the LightEdit mode with the -e(–edit) command. From the LightEdit window, you can activate IDE mode to use all of the IDE features
- Alt+Enter now invokes a grammar and spell checker. The new version of the LanguageTool grammar checking engine improves the review of English text and adds support for more than 10 additional languages
- In the Search Everywhere dialog, you can now search for Git messages, tags, and branches, and you can perform easy calculations
- You can set up your IDE to open files in the preview tab with a single click
- IntelliJ IDEA will notify you of the latest JDK updates and give you the option to skip them or update from your IDE
- We’ve added an emoji picker for Linux ??
Debugger:
- During debugging, you can access interactive hints for variables and change the field values of these variables
- We’ve added a new type of watch expression that is linked to a particular context and displayed inside the editor
- The Show referring objects and Calculate retained size profiling options are now available during debugging
- Only one tab with Frames and Variables and the Console output will open for a Gradle task debugging session
VCS:
- You can stage changes from the IDE. The Staged and Unstaged nodes are now available in the Commit view
- Your VCS menu displays the actions relevant to the version control system you are using for your project
- When you create new branches, the IDE will automatically correct unaccepted characters in branch names. We’ve also reworked the context menu for the current branch to show related actions
- Java
- We’ve started using a new ranking mechanism based on machine learning for Java code completion suggestions
- A new intention action allows you to convert records to classes
- We’ve introduced completion, code insight, and refactorings for sealed classes
- When your files use a Shebang mechanism, IntelliJ IDEA detects this, opens them correctly, and allows you to use code insight
- If you extract a Java method, it is done right away without any intermediate dialogs
- We’ve added new Java inspections and intention actions and improved code completion for them
- The Lombokem> plugin is now built in
Collaborative development:
- IntelliJ IDEA 2020.3 supports Code With Me (EAP) – a new service for collaborative development and pair programming
Run Configurations:
- The Run/Debug Configurations feature a new UI that groups the most frequently used settings together on one screen and gives you the option to add more parameters if needed
Profiler:
- The Profiler tool window has been reworked to allow you to attach the profiler to a running process and quickly access previously created snapshots
- You can open .jfr and .hprof files quickly by dragging and dropping them in the IDE, double-clicking on them in the Project view, or via File | Open
Frameworks and Web:
- You can now filter your endpoint searches and arrange the endpoints conveniently in your IDE. For each endpoint, you have access to the documentation, the ad hoc HTTP client, and Open API
- It is possible to export an HTTP request to cURL
- The URL completion dialog is more informative, showing framework icons, HTTP methods, and source locations. Deprecated URLs are shown with strike-out style
- You can access the URL-related actions via a new globe icon next to the URL
- We now support code insight for Spring MVC Functional Routing, RestOperations, Spring WebTestClient, and Spring Reactive WebClient
- You can convert HTTP requests from the old format to the currently accepted one
- We’ve improved Swagger code insight and added Swagger Hub support
- New Quarkus and Micronaut projects now have automatically created run configurations
- You can use completion for predefined methods used to create repository interfaces. We’ve also added support for the Micronaut @Query annotation
Kubernetes:
- You can now download pod logs to your local machine and quickly delete Kubernetes resources
- It is now possible to automatically load CRD schemas from an active cluster
- We’ve added the Open Console and Run Shell actions
- Kotli
- The Kotlin IDE plugin release cycle is now synced with the IntelliJ IDEA release cycle
- Cross-language conversion is now possible, meaning you can inline Kotlin elements from Java
- You can also inline-refactor the also, let, run, apply, and with scope functions
- We’ve improved the inlining of lambda expressions
- We’ve added support for structural search and replace (SSR) actions for Kotlin
Database:
- You can now use SQL to query MongoDB databases
- DataGrip now supports the Couchbase Query service
- We’ve introduced two new extractors: One-Row and SQL-Insert-Multirow
- JavaScript
- We’ve integrated the TypeScript language service into the Problems tool window and moved the actions previously available within the TypeScript tool window to a dedicated widget on the status bar
- If you have an unresolved React component, the IDE can now create the relevant code construct for you
- For avaScript and TypeScript files, the Navigation bar now lets you jump to specific code elements in the current file
Scala:
- The Scala Compile Server now compiles independent modules in parallel
- We’ve added Compilation Charts to help you optimize the structure of your project modules and the Compile Server’s VM options
- The Scala plugin can now combine IntelliJ IDEA’s package prefixes with Scala’s chained package clauses and relative imports
- Support for MUnit is now available with all the usual advantages
- The Scala plugin now understands the new syntax for main methods
- That was a long list of updates! As always, you can check out the release notes for even more improvements and additions. We hope you enjoy them. As always, please share your feedback in the comments to this post and report any bugs to our issue tracker
更新時間：2020-11-25
更新細節：