AMD Catalyst Drivers (Vista 32-bit) 歷史版本列表
更新時間：2009-05-20
更新細節：
What's new in this version:
Performance Improvements
Catalyst™ 9.5 brings performance benefits in several cases where framerates are CPUlimited.
Some measured examples are:
* Unigine Tropics DX9 – performance gains of up to 11% for single GPU and ATI
CrossFireX™ configurations with anti-aliasing enabled
* Company of Heroes – performance gains of up to 10% for both single GPU and ATI
CrossFireX™ configurations
* BattleForge – performance gains of up to 10% for ATI CrossFireX™ configurations
Resolved Issues for the Windows Vista Operating System
* Windows 7 default driver may take a long time to start on some integrated ASICs
* Both LCD and CRT may go blank when hotplugging the CRT to the system, and will not recover until it is switched to discrete GPU
* Catalyst Control Center may stop responding when Windows Hotkeys have been assigned
* Catalyst Control Center: On "Available Display Devices" detection page, when selecting the secondary display, the radio button is not greyed out for the monitor already chosen as the main display
* "Fan Speed Control" may change to default settings when Crossfire is enabled/disabled
* Catalyst Control Center: At the end of the auto-tuning, it might not report that the process has completed successfully
* Fan Speed Control is missing in OverDrive5 aspect
* On some systems the Catalyst Control Center Over drive pages may fail to display
* Audio Control Panel might show the HDTV entry even when unplugged
* Audio Control Panel might not reflect configuration change from 7.1 Audio to Stereo
* Corruption might be observed in some OGL games with Super Anti-Alias and "Show
CrossfireX" enabled on 3-4 display configurations
Resolved Issues for the Windows 7 Operating System
* Dropped frames may be noticed while playing certain Blu-ray interlaced content
* "World in Conflict": Blank screen may be observed after the introduction trailer
completes
* On some PowerExpress systems a secondary display may be displayed for single
monitor configurations
* Moving a video clip across an extended desktop may cause the desktop to flicker or the media player to stop functioning ATI Catalyst™ Release Note Version 9.5 6
* Device manager mistakenly identifies the adapter as Standard VGA Adapter for some ASICs
* "Yes" and "No" buttons might disappear while moving confirmation windows on
desktop during driver installation
更新時間：2009-04-09
更新細節：
What's new in this version:
ATI Catalyst™ 9.4 - New ATI OverDrive™ auto-tuning application (AMD’s product warranty does not cover damages caused by over clocking, even when enabled via AMD OverDrive software):
# ATI Catalyst 9.4 includes a new ATI Overdrive™ auto-tune application to accurately determine the best over-clocked engine and memory values for ATI Overdrive supported ATI Radeon™ Graphics accelerators
# Designed for the ATI Radeon™ HD 4000 Series
Resolved Issues for the Windows Vista Operating System
This section provides information on resolved issues in this release of the ATI Catalyst™ Software Suite for Windows Vista. These include:
# "World of Warcraft" or "World of Warcraft - Wrath of the Lich King": Flickering no
longer occurs when Shadow is set to medium/high using CrossFire
# Google Sketchup no longer displays blank screen
# Resolutions above 10 x 7 will now full screen properly for specific HDMI displays
# Artifacts no longer visible while playing Age of Conan DX10
# VC-1 progressive disc playback no longer exhibits block corruption
Resolved Issues for the Windows XP Operating System
This section provides information on resolved issues in this release of the ATI Catalyst™ Software Suite for Windows XP. These include:
# The Compute Abstraction Layer (CAL) driver now functions properly under Windows XP
# Overlay Theatre Mode display no longer corrupt after enabling 3D screen saver
# OS Display Settings no longer shows extra resolutions for Component Video
更新時間：2009-03-19
更新細節：
What's new in this version:
ATI Catalyst™ 9.3 Unified driver for Windows 7 and Windows
Vista
* AMD has delivered a single unified graphics driver for both Windows 7 and
Windows Vista – demonstrating AMD’s Windows 7 graphics driver leadership and
focus on delivering a stable and robust Windows 7 experience on AMD hardware
* Delivers full WDDM 1.1 support under Windows 7 on the ATI Radeon HD 4000
Series, ATI Radeon HD 3000 Series, and ATI Radeon HD 2000 Series of products
* Delivers improved gaming performance under Windows 7 vs. Windows Vista
* All future ATI Catalyst postings will deliver one single unified driver for Windows 7
and Windows Vista
ATI Catalyst™ 9.3 Folding@Home performance enhancements
* Using ATI Stream™ technology, owners of the ATI Radeon™ HD 4000 Series, ATI
Radeon™ HD 3000 Series, and ATI Radeon™ HD 2000 Series of graphics
accelerators will see a performance boost in their Folding@Home scores when
running the latest Folding@Home client and upcoming cores in conjunction with
ATI Catalyst™ 9.3
ATI Catalyst™ 9.3 – Windows Vista HDMI audio driver support
integrated into all ATI Catalyst 9.3 packages
* As of ATI Catalyst 9.3 the Windows Vista HDMI audio driver is automatically
included in the ATI Catalyst 9.3 package
* The HDMI audio driver will only be installed if the AMD graphics accelerator has an
HDMI display connector and there is no 3rd party HDMI audio driver installed
New AMD Display Library (ADL) SDK
* AMD Display Library (ADL) SDK is designed to access display driver functionality
for all ATI Radeon graphics accelerators and FirePro graphics accelerators
* The SDK supports Windows XP, Windows Vista and Linux - 32 and 64 bit variants
* The SDK can be used from both unmanaged (C/C++) and managed (C#) applications
- samples are provided within the SDK
* The ADL SDK is available to the public via the Developer relations site
Performance Improvements
Catalyst™ 9.3 brings performance benefits in several cases where framerates are CPUlimited.
Some measured examples are:
* Lost Planet: Colonies gains up to 20% on 4800 series products, and up to 50% on
4600, 4500 and 4300 series products
Resolved Issues for the Windows Vista Operating System
This section provides information on resolved issues in this release of the ATI Catalyst™
Software Suite for Windows Vista. These include:
* Video combing effects no longer visible during movie playback while fast
forwarding or rewinding
* Avivo Video Color Settings are now retained after resume from Sleep/Hibernate
* Overlay Theater Mode is now enabled with component video or composite video in
extended modes
* Catalyst Control Center: Avivo Video Advanced Color page is no longer grayed out
and preview is now functional
* OGL games now play properly with "Show Crossfire logo…" option enabled
* Rotation now works if Aero mode is turned off
Resolved Issues for the Windows XP Operating System
This section provides information on resolved issues in this release of the ATI Catalyst™
Software Suite for Windows XP. These include:
* Avivo Video Color Settings will now be applied in the video when played using
PowerDVD
ATI Catalyst™ Release Note Version 9.3 6
* FJ online game no longer changes resolution slowly in full screen mode with some
ASICs
* Quake 4: Screen corruption no longer appears in CrossFire using two bridge cables
with some ASICs
* Composite video no longer goes black when disabling Overlay Theater Mode using
Catalyst Control Center
* Resolved issues for Open GL 3.0 "CreateContext" function
* Toggling between 3D games in full screen mode to the desktop is no longer slow
when using the Alt-Tab key
更新時間：2009-02-21
更新細節：
What's new in this version:
Performance Improvements
Catalyst™ 9.2 brings performance benefits in several cases where framerates are
CPU-limited. Some measured examples are:
• Crysis DX10 gains up to 20%
• Crysis Warhead DX10 gains up to 20%
• World in Conflict gains up to 5%
System
This section provides information on resolved issues in this release of the ATI
Catalyst™ Software Suite for Windows Vista. These include:
• Catalyst Control Center now enables Anisotropic Filtering for DirectX 10
applications.
AMD Chipset Product Support
AMD Chipset Product Support
ATI Radeon™ HD 3300 Series ATI Radeon™ Xpress 3200 CrossFire
ATI Radeon™ HD 3200 Series AMD 690 Series Chipset
ATI Radeon™ 3100 Series AMD 580X Series Chipset
ATI Radeon™ 3000 Series ATI Radeon™ Xpress 1150 Series
ATI Radeon™ 2100 Series ATI Radeon™ Xpress 1100 Series
ATI Radeon™ X1250 Series ATI Radeon™ Xpress 200 Series
ATI Radeon™ X1200 Series ATI Radeon™ Xpress 1250 Series
Note: When installing the Catalyst™ Vista driver for Windows Vista,
the user must be logged on as Administrator or have Administrator
rights in order to successfully complete the installation of the Catalyst™
Vista driver.
ATI Catalyst™ Release Note 5
• Resolved Catalyst Control Center displaying the following warning message
“The Catalyst Control Center is not supported by the driver version.”
• Catalyst Control Center, Display Manager correctly shows connected monitor
maximum refresh rates
• Catalysts Control Center, component video pixel format settings are retained
on system restart
• Minor screen corruption no longer occurs at the top left of some Samsung
panels when connected to ATI Radeon HD 3200 Graphics
• In Call of Duty 4, some intermittent game corruption no longer occurs when
soften smoke edges is enabled
• Resinstalling the display driver using the INF method on a multi-display (ATI
Radeon HD 3870 X2, Radeon HD 3870) system does not cause the operating
system to fail
• Resolved minor flickering in the playback of a Blu-ray title that may be
noticed when moving to the extended desktop
• Catalyst Control Center, Crossfire Overdrive, changing the GPU Clock and
Memory Clock from the default settings no longer causes a failure in the Test
Custom Clocks test
• With Anti-Alias enabled Doom3 no longer intermittently fails to start on some
Crossfire systems
• Enemy Territory: Quake Wars corruption observed in the globe in the main
menu no longer occurs
• The display driver no longer fails to load on some systems with more than 8
GB of system RAM
• Catalyst Control Center, some HDMI monitor are not longer incorrectly
reported back as DVI
• Resolved video displaying in black and white when playing back high bitrate
AVCHD files
• Playing back some Blu-ray content with video acceleration disabled on
Cyberlink Power DVD_Cinema no longer results in no video rendering
• Fixed H.264 videos not rendering (black video) when Closed Captioning was
enabled
• Overlay Theater Mode now enables with a component video or composite
video in extended modes
• Playing some Blu-ray DVD titles on PowerDVD no longer shows the lower
portion of the player window intermittently appear shaky when playing Special
Features
• Some video shake is no longer observed when fast forwarding with certain
Blue-ray titles
• Resolved intermittent system instability with catalyst 8.12 and some ATI
Radeon HD 4800 CrossFire configurations
• Video tearing no longer noticed when playing back some DVD titles on
WinDVD with all hardware acceleration options enabled
• Creating any type of an OpenGL 3.0 context (normal or forward compatible)
and then requesting the version string no longer causes the driver to stop
responding
• The OS is no longer unstable while running auto-tune when Crossfire is
enabled
更新時間：2009-01-30
更新細節：
更新時間：2008-12-11
更新細節：
更新時間：2008-11-13
更新細節：
更新時間：2008-10-16
更新細節：
What's new in this version:
The Catalyst™ software suite 8.10 contains the following:
* Radeon™ display driver 8.541
* Multimedia Center™ 9.16 (Windows XP only)
* HydraVision™ for both Windows XP and Vista
* HydraVision™ Basic Edition (Windows XP only)
* Remote Wonder 3.04 (Windows XP only)
* WDM Driver Install Bundle
* Southbridge/IXP Driver
* Catalyst™ Control Center Version 8.8
o The Catalyst™ software driver and the Catalyst™ Control Center can be downloaded independently of each other. However, for maximum stability and performance AMD recommends that both components be updated from the same Catalyst™ release
o The Catalyst™ Control Center requires that the Microsoft .NET Framework version 2.0 be installed. Without .NET version 2.0 installed, the Catalyst™ Control Center will not launch properly and the user will see an error message.
Resolved Issues for the Windows Vista Operating System
This section provides information on resolved issues in this release of the ATI Catalyst™ Software Suite for Windows Vista. These include:
* Some video corruption might be noticed when playing certain Blu-ray titles. Further details can be found in topic number 737-38293
* Disconnecting an HDMI display device during DVD playback may result in Windows Vista failing to respond. Further details can be found in topic number 737-38308
* Flickering may occur on the primary display when two dual link displays are used. Further details can be found in topic number 737-38295
* Playing some video file formats under Windows Media Player 11 can cause a time delay response. Further details can be found in topic number 737-38926.
* City of Villains: Flashing observed in the game when super AA is enabled in Catalyst Control Center and the resolution is at 2560x1600. Further details can be found in topic number 737-38301
* When desktop rotation enabled in OS:Vista Greek some text is cutoff in the default monitor.Further details can be found in topic number 737-38302
* Performing an express un-install of the display driver on some ATI Radeon HD 48x0 series devices, may intermittently result in the display device failing to display an image. Further details can be found in topic number 737-38308
更新時間：2008-09-18
更新細節：
What's new in this version:
The Catalyst™ software suite 8.9 contains the following:
· Radeon™ display driver 8.53
· Multimedia Center™ 9.16 (Windows XP only)
· HydraVision™ for both Windows XP and Vista
· HydraVision™ Basic Edition (Windows XP only)
· Remote Wonder 3.04 (Windows XP only)
· WDM Driver Install Bundle
· Southbridge/IXP Driver
· Catalyst™ Control Center Version 8.9
New Features
Catalyst™ 8.9 introduces the following new features:
• Catalyst™ Control Center: New Display mode support
• OverDrive™ support for QUAD CrossFireX configurations
· OpenGL™ 3.0 extension support
Catalyst™ Control Center: New Display mode support
This release of Catalyst™ introduces 1080p @ 50Hz custom mode support for HDTVs for the ATI Radeon HD 4000 Series, ATI Radeon HD 3000 Series, ATI Radeon HD 2000 Series, and ATI Radeon X1000 Series of products. Users can configure their own custom 1080p @ 50Hz modes to best fit their display.
OverDrive™ support for QUAD CrossFireX configurations
This release of Catalyst™ introduces Overdrive support for QUAD CrossFireX configurations. Users can now over-clock each graphics accelerator’s engine or memory speed when running in QUAD CrossFire configurations using manual controls or the automated auto-tuning utility.
OpenGL™ 3.0 support - Phase 1
This release of Catalyst™ introduces OpenGL™ 3.0 extension support. In upcoming Catalyst™ releases AMD will continue to expand its support for OpenGL 3.0 extensions. The following is a list of supported extensions in Catalyst 8.9:
· ARB_half_float_pixel
· ARB_draw_instanced
· ARB_instanced_arrays
· EXT_texture_compression_3dc
· EXT_texture_compression_rgtc
Known Issues Under the Windows Vista Operating System
This section provides information on known issues that may be experienced under the Windows Vista operating system with the latest version of Catalyst™. These include:
· Call of Duty 4 or Crysis: Color corruption may be noticed when running the games in full screen mode with Quad CrossFire™ enabled. Further details can be found in topic number 737-35115
· Crysis: Playing the game at a display resolution lower than the native display resolution of a connected 30" display device may result in corruption being noticed when CrossFire™ is enabled and having the Catalyst™ Control Center scaling the image to full screen. Further details can be found in topic number 737-35111
· Hellgate London: Pressing Alt-Tab to return to the Windows Vista (32 bit version) desktop while playing the game may intermittently result in a translucent image of the game appearing on the Windows desktop. This issue may be experienced on systems containing either an ATI Radeon™ HD 4870 X2 or ATI Radeon™ 4800 product
· Lost Planet (DX10 version): Some of the in-game display resolutions may fail to be available when using a CRT display device. Further details can be found in topic number 737-35872
· Gears of War: The game may intermittently fail to respond on systems running Windows Vista (32 bit version) and containing an ATI 48x0 series of product when certain having various in-game options set. Further details can be found in topic number 737-37346
· The secondary HDMI Display may turn off when resuming from an S1 hibernation with an HDMI display connected. Further details can be found in topic number 737-31146
· An error message may appear when installing the display driver package through setup.exe. Further details can be found in topic number 737-31577
· Installing an ATI Radeon™ X1600 series of product into a system containing an ATI Radeon™ HD 2600 series of product with the display driver already installed may result in the operating system entering a continuous reboot. This issue may be averted by removing the ATI graphics driver prior to the installation of the ATI Radeon™ X1600 series of product. This issue may also be experienced with the ATI Radeon™ X1300 and 1550 series of products. Furtherinformation may be found in topic number 737-33471
· Performing an express install of the Catalyst™ Control Center may result in an error message being displayed when rebooting the system. Further details can be found in topic number 737-29532
· Restoring the factory defaults for the Catalyst™ Control Center may result in the Catalyst™ Control Center title bar intermittently failing to be redrawn when dragging the interface around the Windows Vista (64 bit version) desktop
· Video playback may occasionally appear shaky or jerky when playing a recorded video file using a Webcam to record and Quickplay to playback the file Enabling extended desktop mode and setting the color depth below 16bpp may occasionally result in the secondary display device failing to redraw properly
· Connecting two or more display devices and enabling either extended desktop or clone mode may intermittently result in the operating system failing to respond when running the Auto-tune feature in the Catalyst Control Center -> OverDrive page. Further details can be found in topic number 737-37347
· Setting the desktop resolution to 1600x1200 or greater may result in green pixel corruption being noticed when playing certain games. This issue maybe noticed when using a system running Windows Vista and containing an ATI Radeon™ HD 2600 or HD 2400 series of product. Further details can be found in topic number 737-31150
· Attempting to play the HD-DVD title Harsh Times, School for Scoundrels using the Cyberlink player may result in block corruption being noticed. Further details can be found in topic number 737-31155
· Enabling clone mode followed by switching to extended desktop mode may result in the Windows Vista (64 bit version) failing to respond. Further details can be found in topic number 737-34125
· Enabling extended desktop mode and setting the color depth below 16bpp may result in the secondary display device failing to redraw properly. Further details can be found in topic number 737-35114
· A green or black screen may be displayed when configuring MCE to ATSC mode. Further information may be found in topic number 737-27622
· Playing a Blu-ray DVD title may result in corruption being noticed when using certain display resolutions such as 1360x768, 1360x1024, or 1600x1200. Further details can be found in topic number 737-35896
· Enabling clone mode followed by switching to extended desktop mode may result in the Windows Vista (64 bit version) failing to respond. Further details can be found in topic number 737-35766
更新時間：2008-08-22
更新細節：
What's new in this version:
The Catalyst" software suite 8.8 contains the following:
* Radeon" display driver 8.522
* Multimedia Center" 9.16 (Windows XP only)
* HydraVision" for both Windows XP and Vista
* HydraVision" Basic Edition (Windows XP only)
* Remote Wonder 3.04 (Windows XP only)
* WDM Driver Install Bundle
* Southbridge/IXP Driver
* Catalyst" Control Center Version 8.8
Resolved Issues for the Windows Vista Operating System
This section provides information on resolved issues in this release of the ATI Catalyst" Software Suite for Windows Vista. These include:
* Setting the language option to Greek no longer results in cropped text being noticed in the Catalyst" Control Center->Component Video page
* Adobe After Effects: Exiting the application no longer results in the Windows Vista (64 bit version) operating system intermittently failing to respond
* Call of Duty 4: Corruption is no longer noticed when having Quad CrossFire" enable and an HDMI 1080p display device connected. Further details can be found in topic number 737-35112
* Devil May Cry 4: Anti-Aliasing no longer fails to function when playing the game with CrossFire" enabled
* Dirt: Playing the German Crossover track (Rally World Event) no longer results in the grand stands and chain link fences not being display correctly when CrossFire" is enabled and MSAA is disabled
* Hellgate London: Setting the display resolution to 2560x1600 no longer results in the game failing to respond
* Linage II: Switching between the game and the Windows desktop no longer results in the desktop appearing brighter than its original setting. Exiting the game and restarting the operating system may also result in the desktop brightness failing to be restored to its original setting. Further details can be found in topic number 737-35108
* Lost Planet (DX9): Enabling CrossFire", AA to 4x, AF to 8x, and having all of the in-game options set to high no longer results in the game failing to respond when running the performance test
* Mahjongg Artifacts: Flickering is no longer noticed when playing the game on pre-configured name brand systems
* Mass Effect: Playing the game with CrossFire" enabled no longer results in corruption being noticed on the AA menu
* NASCAR demo: Setting all the in-game options to the highest levels no longer results in corruption being noticed on systems containing an ATI Radeon" HD 2400 series of product and running Windows Vista
* Quake 4: Corruption is no longer noticed when starting a new game on systems running either Windows XP or Vista and containing an ATI Radeon" HD 48x0 series of product
* Second Life: Playing the game on a CrossFire" configured system (ATI Radeon" HD 2400 and above) no longer results in corruption and slow performance being noticed
* Unreal Tournament 3: The game no longer intermittently fails to launch when a map has texture detail set to maximum. Further details can be found in topic number 737-31189
* World In Conflict: Setting the video quality to high no longer results in corruption being noticed
* Installing a newer version of the Catalyst" Control Center without removing the older version no longer results in a windows error message appearing when attempting to launch the Catalyst" Control Center
* The Reduce DVI frequency on high-resolution displays is no longer missing in the Catalyst" Control Center->Digital Panel (DVI) page when hot un-plugging and then hot-plugging a display device using the HDMI port on systems containing an ATI Radeon" HD 3100/3200 series of product
* The Display Management options are no longer missing or corrupted when switching between profiles in the Catalyst" Control Center
* Clicking Start->All Program->Catalyst" Control Center->Restart runtime twice no longer results in the two ATI Restart icons appearing on the Windows taskbar
* Setting the DPI to 120 or 144 no longer results in cropped text being noticed throughout various pages of the Catalyst" Control Center
* Making changes to the default values in the Avivo color page and closing the Catalyst" Control Center without applying the changes no longer results in the default values failing to be restored
* Cropped text is no longer noticed in the VPU Recover message when the DPI is set to 144
* Checking the Use application settings in Avivo Video->Basic Color no longer results in the preview failing to be updated with the default color settings
* Corruption is no longer noticed when entering the Catalyst" Control Center->Basic Quality page on systems containing an ATI Radeon" HD 4800 product
* Setting the language option to German and the Catalyst" Control Center skin to ATI_Crimson no longer results in text appearing cropped within the Catalyst" Control Center
* Catalyst" Control Center: Enabling the option for Always on Top no longer results in dialog boxes failing to appear on top of the Catalyst" Control Center
* Running through a custom install of the graphics driver and installing the driver to a directory of choice no longer results in a C++ error message when right clicking on the Windows desktop
* The pulldown menu options found within various pages of the Catalyst" Control Center are no longer mis-aligned
* Setting the language option to Russian no longer results in cropped text being noticed within the Catalyst" Control Center
* Using the Catalyst" Control Center Setup Assistant no longer results in the Catalyst" Control Center Advanced View text is appearing greyed out
* A restricted number of HDTV custom modes no longer occurs after deleting all of the custom modes that were previously added
* Catalyst" Control Center: The online help links for Color->Full Screen3D are no longer missing
* Catalyst" Control Center->Help->CrossFire": The help file no longer states that CrossFire" is enabled by default under the Windows XP operating system
* Incorrect help hardware configurations are no longer described for CrossFire" in the Catalyst" Control Center->Help contents
* Setting the language option to any of the supported languages now results in the translated language web pages being displayed (if in existence) when clicking on the Welcome link
* Corruption is no longer noticed in the lower portion of the HDMI display when using certain display modes
* Disabling the graphics driver while clone mode is enable no longer results in corruption being noticed on the display devices
* Connecting an HDMI display device and entering an S3 state no longer results in the operating system failing to respond or VPU Recover to activate
* Connecting an HDMI display device to the DVI port using an HDMI to DVI dongle no longer results in the display mode of 720x480 failing to be in the display mode list after hot-unplugging the HDMI display device and hot-plugging a DVI display device. Further details can be found in topic number 737-35105
* Screen flashing no longer occurs when connecting a display device that has incorrect Extended Display Identification Data information (EDID)
* An error message indicating that the display driver stopped responding and has recovered is no longer displayed when playing a DVD title using the Windows Media Player on systems containing an ATI Radeon" 3100/3200 series of product
* Connecting a dual link display device to a system containing an ATI Radeon" HD 36x0 series of product no longer results in the display device failing to display an image when enabling the option to reduce DVI and setting the display resolution to 1280x1024 60Hz 32bpp
* Connecting an HDMI display device and setting the display resolution to 1600x1024 or higher with a refresh rate higher than 60Hz. no longer result in the display device failing to display an image
* Logging off one user and logging on as another no longer results in CrossFire" failing to be enabled or disabled when logging back on as the original user
* A CCCPrev.exe has stopped working error message no longer appears when selecting any 3D settings in the Catalyst" Control Center when extended desktop mode is enabled
* Connecting a CRT as the primary and a DFP as a secondary display device followed by enabling extended desktop mode no longer results in clone mode becoming active when hot-unplugging the DFT and the hot-plugging it back on
* Connecting a TV as a secondary display device and attempting to enabled extended desktop mode no longer results in the TV format failing to change
* Connecting a secondary display device and enabling it as the primary display no longer results in the resolution being set to it maximum display resolution when enabling CrossFire"
* Clicking on the seek slider when playing a DVD title using the PowerDVD player no longer results in corruption being noticed on the playback window
* Switching from h.264 to MPEG2 video titles no longer results in the operating system intermittently failing to respond
* Playing VC1 video clips no longer results in green corruption being noticed in the player window
* Seeking or fast-forwarding in a media player application no longer results in corruption being noticed on systems containing an ATI Radeon" HD 3600 series of product and running Windows Vista (32 bit version)
* Enabling BOB de-interlacing no longer results in a green line being noticed on the bottom of the playback window when playing a 1080i clip
* Playing a standard definition DVD using the Windows Media Player no longer results in the player window flashing when closed captioning is enabled
* Playing a DVD title using the PowerDVD player no longer results in the PowerDVD player failing to respond when DXVA is disabled, closed captioning is enabled and the user is fast forwarding the DVD title anywhere from 4x to 32x