AOMEI Backupper Standard 歷史版本列表
更新時間：2019-01-25
更新細節：
What's new in this version:
- Enhanced compatibility: AOMEI Backupper 4.6.2 is able to be controlled and managed as clients by AOMEI Centralized Backupper 2.1 to perform file sync from one central management console
更新時間：2019-01-25
更新細節：
What's new in this version:
FlashBoot 3.2h
- Change log not available for this version
FlashBoot 3.2g
The following errors were fixed (they occured in a loop during registry validation in cloning scenarios):
Could not replay logs for registry hive ...: L4 validation failed:
- KS-cell #0x... has abnormally large length of security descriptor
Validation warning for ... registry hive: L4 validation WARNING:
- Index-of-subkeys cell #0x... has type IR, but there are not enough subkeys to be contained in IR
FlashBoot 3.2f
- Registry hive validation rules (which are used to enforce consistency during Windows 8/8.1/10 cloning) were relaxed to allow zero-sized registry hives. This should prevent erroneus loop during snapshot validation in cloning scenarios
Prepackaged Windows 7 driver for Intel USB 3.0 Host Controller was updated, added support for the following new devices:
- PCIVEN_8086&DEV_15B5
- PCIVEN_8086&DEV_15B6
- PCIVEN_8086&DEV_15C1
- PCIVEN_8086&DEV_15D4
- PCIVEN_8086&DEV_15DB
- PCIVEN_8086&DEV_A22F
- PCIVEN_8086&DEV_A2AF
FlashBoot 3.2d
- Starting from this version, FlashBoot Pro supports creation of bootable clones without compression
FlashBoot 3.2c
Fixed the following error for non-UEFI scenarios:
- no valid version info in WindowsBootPCATbootmbr (it was a typo: bootmbr -> bootmgr).
FlashBoot 3.2b
- Change log not available for this version
FlashBoot 3.2
- Starting from this version, FlashBoot Pro supports creation of installable clones. They can be used to transfer Windows with all installed apps and settings between PCs, to move OS from HDD to SSD, to move OS to/from RAID array, to change OS boot method between UEFI/non-UEFI, to gain unpartitioned disk space for dual-boot configurations, or just as self-extracting backup
- Also, severe data corruption bug (in INFCACHE.1) was fixed in driver integration subsystem. This applies to Windows 7 and Windows Vista only
FlashBoot 3.1k
- Added prepackaged drivers for Intel USB Host Controller with device IDs 1E26 and 1E2D (Panther Point)
FlashBoot 3.1j
- Change log not available for this version
FlashBoot 3.1i
- Fixed severe data corruption bug in WIM recompression subsystem: unrelated files with matching DIRENTRY.liHardLink were erroneously coalesced into single file. This bug could occur with WIM images originally captured on one NTFS volume, then updated from another NTFS volume. It sometimes manifested as invalid contents of WindowsSystem32oobeWinLGDep.dll file inside sourcesinstall.wim of Windows 7 x64 setup image after driver integration
FlashBoot 3.1h
- Samsung NVMe controller driver was updated from version 2.2.0.1703 to 3.0.0.1802, and now it supports new device PCIVEN_144D&DEV_A808
FlashBoot 3.1g
- Fixed "too many USB logical disks after soft replug" problem which occured for full-featured Windows 8/8.1/10 installation and cloning scenarios in UEFI mode, if target USB storage device was USB HDD, and if host OS was Windows 10 1804
FlashBoot 3.1f
- Added handling of specific condition when pre-existing EFI System Partition or Microsoft Reserved Partition could prevent reformatting of fixed USB mass storage device with GPT partition layout. This applies both to FlashBoot itself and self-extracting EXE files generated by FlashBoot
FlashBoot 3.1e
The following prepackaged drivers were added:
- Intel(R) USB 3.0 Host Controller Adaptation Driver for Windows 8/8.1
- ASMedia USB 3.1 Extensible Host Controller Driver for Windows 7 and above
- Etron USB 3.0 Extensible Host Controller Driver for Windows 7 and above
- Fresco Logic xHCI (USB3) Device Driver for Windows 7 and above
- Texas Instruments USB 3.0 Host Controller Driver for Windows Vista and above
- Intel(R) 8 Series Chipset Family SATA AHCI Controller Driver for Windows 7 and above
- Intel(R) 9 Series Chipset Family SATA AHCI Controller Driver for Windows 7 and above
- Intel(R) ESB2 SATA AHCI/RAID Controller Driver for Windows 7
- Intel(R) ICH8R/DH/DO SATA AHCI Controller Driver for Windows 7
- Intel(R) ICH8M-E/M SATA AHCI Controller Driver for Windows 7
- Intel(R) ICH9R/DO/DH SATA AHCI Controller Driver for Windows 7
FlashBoot 3.1d
- All builtin links to prime-expert.com and subdomains were changed from http to https
FlashBoot 3.1c
- For Windows Setup Media conversion scenarios (from ISO to USB), if size of install.wim/install.esd is larger than or equal to 4 Gb, and target filesystem is not NTFS, then this file is recompressed in solid mode. This is strictly necessary for post-November 2017 builds of Windows 10, and this is on par with MS Media Creation Tool
FlashBoot 3.1b
- Starting from this version, FlashBoot driver integration feature supports Windows Setup images with mixed bitness (32-bit/64-bit)
FlashBoot 3.1a
- Starting from this version, Windows Recovery is installed to the target USB storage device along with mainline Windows in all ToGo scenarios (installing full-featured Windows 8/8.1/10, creating bootable clone of Windows 8.1/10). Windows Recovery takes part in major updates of Windows 10 (such as Fall Creators Update), so functional Windows Recovery is essential for this OS to survive major updates in ToGo mode
- Driver slipstreaming feature for Windows Vista/7/8/8.1/10 now updates Windows Recovery Image (in addition to Windows Image and Windows Setup Image, as in previous versions), so Windows Recovery will be able to detect USB 3.0 peripheral HID and Windows Partition on NVMe/RAID storage devices. One more reason to slipstream drivers via FlashBoot Pro instead of sideloading them in Windows Setup
Prepackaged driver for Intel USB 3.0 Host Controller was updated, now it supports the following additional devices:
- PCIVEN_8086&DEV_15B5
- PCIVEN_8086&DEV_15B6
- PCIVEN_8086&DEV_15C1
- PCIVEN_8086&DEV_15D4
- PCIVEN_8086&DEV_15DB
- PCIVEN_8086&DEV_A1AF
- PCIVEN_8086&DEV_A22F
- PCIVEN_8086&DEV_A2AF
- Backward navigation in wizard for cloning scenario was fixed (used to skip file/folder exclusion page)
- Grey background used to flicker occasionally on the splash screen, that's fixed now
FlashBoot 3.1
- Change log not available for this version
FlashBoot 3.0h
New method of UEFI bootloader installation for the following scenarios:
- PrepareWinVista78or10InstallerOnUSB_FromDVD_UefiMode
- PrepareWinVista78or10InstallerOnUSB_FromESD_UefiMode
- InstallWindows8or10ToUSB_FromDVD_UefiMode
FlashBoot 3.0g
Fixed the following error which occured for all scenarios with CHS geometry translation (DOS, Windows XP, BartPE) starting from FlashBoot version 3.0:
- Boot from USB disk failed, status
- Press Ctrl+Alt+Del to reboot
FlashBoot 3.0f
- Fixed regression for Windows 8 which was introduced in FlashBoot 3.0d. Windows 8.1 and Windows 10 were not affected
FlashBoot 3.0e
- Added AMD USB 3.1 host controller driver to FlashBoot builtin drivers
FlashBoot 3.0d
- Change log not available for this version
FlashBoot 3.0c
- Fixed a regression in VFS code which was introduced in version 3.0b
FlashBoot 3.0b
- Starting from this version, it's possible to create self-extracting archives specifying root directory of some volume as a source directory
FlashBoot 3.0a
- Raw image writing: fixed stall of progress indication during zero padding operation
- FlashBoot size was reduced due to better compression of screenshots in the help file
FlashBoot 3.0
- New features: driver integration and creation of self-extracting USB formatter EXE files
- Dropped a lot of obsolete features related to floppies, CDs, DOS, Windows 9x and 10-year old versions of Linux
- Simpler licensing model: Free and Pro editions, without time/use limitations
- Free edition is useful on its own and roughly corresponds to other free tools on the market
- Most of features from version 2.x were moved to Free edition
- Simpler main menu, clearly separated "OS installer on USB" from "full OS on USB"
- Improvements in command line version: flexible arguments, faster start time
更新時間：2019-01-25
更新細節：
更新時間：2019-01-24
更新細節：
What's new in this version:
Floating Panels and Multiple Screens:
- Supporting multiple screens has been the top feature request for a while now. That’s understandable
- Pinegrow’s UI – with multiple page views, code editor, component libraries, panels for properties, styling, CMS and more – takes up a lot of screen real estate
- Until now the whole UI had to be contained in a single window, so things quickly got crowded
- In Pinegrow 5.1 you can float panels – and groups of panels – in separate windows. Panels can be freely dragged between windows and rearranged within a window
Easily upgrade Bootstrap:
- Bootstrap starter pages, library components and properties have been updated to the latest versions, 4.2.1 and 3.4.0 respectively
- Pinegrow can also easily update your existing Bootstrap projects to the latest Bootstrap version (Bootstrap 3.x to the latest Bootstrap 3 and Bootstrap 4.x to the latest Bootstrap 4)
- Read the complete guide on how to upgrade Bootstrap to the latest version
Fixed Master Pages and WordPress Site actions on plain HTML projects:
- Pinegrow had a bug that prevented using Master Page actions and WordPress Site actions correctly on projects that didn’t use Bootstrap or Foundation
- In those cases both actions didn’t remember their parameters
WordPress Theme builder changes:
Post image – Smart action:
- Until now, the action added the ( is_singular() || in_the_loop() ) when displaying a post image in the background of the element. This created problems with custom queries and non-singular templates
- Now, the action only checks for the presence of the current post ID, if post ID is not specified as a parameter of the action
- Another change is that this action doesn’t automatically add with-image class to the element with the background, as it did before
Action parameters:
- Some WordPress actions had checkbox parameters that were on by default. Unchecking them actually set the non-default, negative. action parameter value
- That made it difficult to spot such checkbox that were set off, and distinguish them from checkboxes that were simply off by default
- That’s why all such checked-by-default checkboxes are changed into select boxes with default value “Yes”. This makes the controls set to “No” very easy to notice
Starter Theme 2 update:
- Starter Theme 2 has been updated to Bootstrap 4.2.1 and optimizations have been applied to some HTML templates. Similarly, some WooCommerce templates have been updated to adapt to the latest versions of the plugin
Save partials:
- Save partial action (in Actions panel) can now correctly save content of script and style elements
Attribute editor in the Properties panel:
- Until now editing attributes that contained HTML tags, stripped the tags from the value
- To prevent this, the Attribute editor now skips such attributes and displays the notice that you can edit them with Element code
Controlling visibility of CSS Grid buttons and resize points:
- CSS Grid buttons can get in a way, especially when elements are small
Network proxy settings:
- It is now possible to let Pinegrow know to use a proxy server for accessing the network by specifying the configuration string in Settings
更新時間：2018-12-12
更新細節：
What's new in this version:
- Support SAPPHIRE NITRO+ RX 590 Series
更新時間：2018-12-11
更新細節：
What's new in this version:
- Fix: GPU Tweak II makes the fans always stop on some AMD cards
更新時間：2018-12-07
更新細節：
What's new in this version:
- Support management by AOMEI Centralized Backupper 2.0 and perform centralized file backup
更新時間：2018-11-26
更新細節：
更新時間：2018-11-20
更新細節：
What's new in this version:
- First, a quick look back. In the year since Pinegrow Web Editor 4 was released, we had 10 strong updates with features like Smart WordPress Actions and powerful Visual CSS Grid Editor.
- A note about upgrades to Pinegrow 5: if your license is eligible for free updates (one year after the license purchase and renewal, or as long as subscription is active) you get all Pinegrow Web Editor updates for free, including Pinegrow 5.
- With Pinegrow 5 we focus on improving the workflow of dealing with HTML layout and CSS styling. We even created a feature called “Focus on”. “Focus on…” lets us isolate an element on the page and deal with just this element instead of the whole page. That’s very useful on complex HTML layouts. “Focus on…” command is available in the top toolbar, on the element context menu or with the shortcut CMD+F (CTRL+F on Windows/Linux).
A couple of things happen when we Focus on an element:
The Tree panel displays the structure of the focused element, with all its children nodes collapsed (only the top most level is expanded):
Drag & drop on the page deals only with top level children of the element. For example, grabbing anything within the element will grab the top level child:
- Similarly, dropping an element from the Library panel will place the element on the top level of the focused element
- That’s very handy for dealing with the top level structure of the focused element without worrying that we’ll drop something in the wrong place
If we want more control over drag & drop placement, we can expand relevant nodes in the Tree panel and use it for dropping or rearranging elements:
The “Focus on” menu also contains a shortcut to focusing on the Page layout of the Body element:
The Focus bar also lists the elements that can be inserted into the focused element, if available:
- To exit the “Focus on” mode click on the close icon in the Focus bar or select Clear from the Focus menu
- Improved CSS Styling
- Starting from Pinegrow 3 it has been possible to style elements with inline styles (with HTML element style attribute)
- The benefit of inline styles is that we can jump straight into styling an element, without thinking about classes, ids and CSS rules
- But eventually, all inline styles should be transferred into proper CSS rules. That’s hard to do if inline styles are scattered around the page
- Pinegrow 5 has a solution for that
- Working with inline styles
First, the Style panel now clearly indicates when inline styles are used:
Second, the Quick Create CSS Rule tool offers to transfer the inline styles into a newly created CSS rule:
And the Tree panel shows the style icon next to elements with inline styles. Clicking on the style icon in the Tree jumps straight into Style editor for that element:
The Tree panel filter can be used to only display elements with inline styles:
- With these tools we have the best of both worlds: the freedom to directly style with inline styles and the systematic process for creating CSS rules for those styles
- And some might ask: Why not have a feature that would automatically save all inline styles on the page as CSS rules
- It would be easy for Pinegrow to go through the page and store all inline styles into CSS classes like .rule1, .rule2…
- Although it sounds useful, such feature would lead to messy CSS code. Creating maintainable CSS structure requires strategic thinking about properly naming and organizing CSS rules. That’s not something that an app can do for you
- Creating clean and maintainable code is the top goal and quality of Pinegrow Web Editor. We don’t want to introduce any feature that would go against this
- Other styling improvements
There are more styling improvements worth mentioning:
Stylesheets and their CSS rules can be hidden in the Active Style panel by clicking on the Hide stylesheet icon next to the stylesheet name:
- Before, the “Ignore in Active” function was only available from the Stylesheets menu
Text indent control was added to the Text section of the CSS Visual Editor:
“Customize variable” command (for SASS and LESS files) will ask for the new value if the default value uses a custom function:
This avoids breaking SASS/LESS files with functions that are not yet defined in the section where custom variables are defined:
- Pinegrow uses CSS Autoprefixer when compiling SASS and LESS files. Now you can control the Autoprefixer configuration in the Settings dialog. This feature is for advanced users, most users can just leave the autoprefixer settings as they are
- The Project panel
- Note, the Project panel is a Pinegrow PRO feature
Now, we can drag images, stylesheets and scripts from the Project panel to the page. Draggable files have a Drag icon displayed next to their names:
- Dragging an image inserts the image to the selected place on the page or in the Tree
Dropping an image on an existing image on the page replaces that image:
- Dragging a stylesheet (.css file) to the page appends the stylesheet to the page
- Doing that with a Javascript (.js) script file will insert the script to the footer of the page
Image previews in the Project panel now also display the dimensions and size of images:
- And using the search in the Project panel expands all folders with matched files
- The Tree panel
The Tree panel got a “Filter” function that lets us display only elements with inline styles, images, texts, links, components or WordPress actions:
The filter works alongside the existing search function that lets us search with strings and CSS selectors:
- Other improvements
- Use arrow keys to select elements
- UP_KEY selects the parent element
- DOWN_KEY selects the first child element
- LEFT_KEY selects the previous element
- RIGHT_KEY selects the next element
- Use SHIFT_KEY with LEFT_KEY and RIGHT_KEY keys to select a range of elements
- Selecting a duplicated element
- A duplicated element is now automatically selected, if the Duplicate command was run on a selected element
- Element dimensions in pixels are shown when an element is selected or hovered with the mouse pointer
- Clicking on a image in the Unsplash photo browser replaces the currently selected image
- Use “Clear code” icon in Insert code in the Library panel to clear the code from the editor
- Page and project thumbnails are now turned off by default on Linux because on Linux, generating thumbnails requires briefly showing a second window. You can turn them on in the Options menu on the Start screen
更新時間：2018-11-12
更新細節：
What's new in this version:
- Simplified the installation package and optimized the registration process