AnyDesk 歷史版本列表
更新時間：2018-08-23
更新細節：
What's new in this version:
AnyDesk 4.2.3
New Features:
- Added a setting to disallow direct connections (hole punching). Default is allowed
Fixed Bugs:
- Fixed auto-reconnect in the remote restart feature
- Fixed a rare crash which could occur in incoming sessions
- In some situations (for example virtual machines), no image was displayed by the ddraw view. In this case, AnyDesk uses gdi now and displays an image
- The standard distribution of AnyDesk did not start when a previously installed MSI version of AnyDesk was not uninstalled correctly
AnyDesk 4.2.2
Fixed Bugs:
- An alias could not be registered in case '@ad' was not appended
Other Changes:
- On successful alias registration a hint is shown, that the user has to take care of his alias and ID on his/her own
AnyDesk 4.2.1
- Fixed a crash which could occur after one minute when there is no mouse attached to the system
- Fixed packets being dumped which should only be dumped in debug mode
- Fixed a rare crash which occured immediately after starting AnyDesk
AnyDesk 4.2.0
New Features:
- Clipboard file transfer can now be disabled in the security settings
- The preview image can now be disabled in the privacy settings
- Most of the edits now support 'Ctrl'+'A'
- The session comment section can now be disabled where it appears
Fixed Bugs:
- Fixed a crash in D3D render mode
- Fixed a crash related to the 'Follow remote mouse cursor' feature
- Fixed a bug which made it possible to set up a password which did not meet the password safety requirements of AnyDesk for unattended access
- Fixed a race condition that could occur during requesting an alias
- When pasting a file after disabling the clipboard, the file copy operation got stuck
- The file copy operation is cancelled now when clipboard sync is disabled
- Fixed a rare bug which made AnyDesk crash immediately on startup
AnyDesk 4.1.3
- Made the session comment section multiline again
- The disclaimer did not show up again, when it was rejected the last time AnyDesk started and has not been changed in the meantime
- File transfer sessions no longer transmit hotkeys
- Fixed DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah of Fortinet's FortiGuard Labs for reporting this vulnerability to us
AnyDesk 4.1.2
- Fixed a bug in the security panel which made it impossible to set a password
- Fixed navigation to the drive selection view in file transfer mode
AnyDesk 4.1.0
Security Fixes:
- Prevented DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah from Fortinet for reporting this vulnerability to us
- Updated OpenSSL library to the latest version
Fixed Bugs:
- Fixed monitor reactivation when the monitor is in sleep mode and there is an incoming connection
- Fixed manual update link when auto-update is disabled
- Fixed a bug that prevented further connections to a computer, if a previous connection to that computer failed
- Fixed keyboard problems that occurred in conjunction with the right shift button
Other Changes:
- If a disclaimer has been set up, it will be shown on every change even if AnyDesk is installed already
- Most of the edits in AnyDesk now support context menu operations (paste, cut, clear, undo)
- AnyDesk will no longer follow the remote cursor when the local user changed the tab himself
- Improved address book update performance
AnyDesk 4.0.1
Fixed Bugs:
- SAS for Windows 8 and upwards was broken due to an extension handling Terminal Server
- On Terminal Server switching to advanced view may have resulted in a crash
AnyDesk 4.0.0
Extended support for Terminal Server:
- On connecting to a terminal server the user can choose now if to connect to the console session or a specific user. As an alternative a fully specified address can be used to directly connect to a a specific user
- Added file manager session type. The file manager can also be used during a normal session
- Session recording and playback. Enable this option under "privacy" in the options tab
- Optional auto-locking of the Windows session on AnyDesk session end
- Follow mouse cursor feature: When activated, the monitor selection follows the remote mouse cursor
- Auto-Update
- The user can now choose an alias
- Client Generator: Updates can now be disabled
AnyDesk 3.7.0
Fixed Bugs:
- Security change: fixed a bug where the permissions could be reset during the session
- In some cases, the AnyDesk main window was not rendered correctly in Windows 10 (showing transparent areas)
AnyDesk 3.6.3
- Fixed a crash when terminating AnyDesk using the tray icon while sessions were running
- Under rare conditions, connecting to Windows 10 showed no image/a black image
- Clipboard permission works again
- Disallowed to change the license key if settings are disabled
- Fixed SAS (Ctrl+Alt+Del) which did not work under some conditions on Windows Vista and upwards.On some Windows 10 systems, AnyDesk did not work when the monitor was rotated. On these systems, AnyDesk should now transmit the monitor content normally
- Fixed two rarely occuring crashes on address book close
AnyDesk 3.6.2
Fixed Bugs:
- Trying to add an address from the speed dial to an address book with a license of type free or lite
- opened a dialog instead of the address book
- Fixed screensaver settings on AnyDesk session close. This was broken due to a bug in Windows
- Fixed session comment dialog which could appear twice
Other Changes:
- Made license key removal more explicit and added option 'Change license key' to the main menu
AnyDesk 3.6.1
- Fixed Bugs
- Important security update, fixed dll injection vulnerability. Thanks to 0x09AL for reporting this
AnyDesk 3.6.0
- Transmission of system information can now be blocked. Older versions of AnyDesk will show useless information in this case
- Added a setting to disable the chat log
- Added a setting to choose the path to the chat log
- Added a setting to show the address book on startup
- Added a setting to allow the accept window to go to foreground on chat message received
AnyDesk 3.5.0
New Features:
- The remote restart feature now even works when AnyDesk is not installed
- Please note: You will need to request elevation from the remote user before using the restart feature in this case
- Custom AnyDesk: Text and title of ID and Connect Group (Main Window) can now be customized
- Custom AnyDesk: Before frontend startup a disclaimer can be shown now, which can be customized in logo, title, text, background color and the text on the accept and cancel buttons. It is shown only, if AnyDesk is not installed and the text contains non-whitespaces. All other settings are optional
- Custom AnyDesk: Added support for environment variables in paths
Fixed Bugs:
- In the D3D fullscreen menu the keyboard mode has always been set to 'translate'
- The invitation link in the main window has not been shown anymore after switching to advanced view and back
- Fixed crash on opening the chat log in the backend after session close
- Fixed crash when the session info panel was closed before the remote data was displayed
Fixed Bugs:
- Fixed custom logo layout in the main window's advanced view
- Fixed the connection panel's password edit showing clear text when disabled
AnyDesk 3.4.1
- Fixed dpi of comment session dialog
- Fixed that the comment session dialog can be shown although the licence is of type Lite
- Fixed a crash related to the comment session dialog
- Fixed that the character right of '9' on the standard hungarian keyboard layout has not been recognized before
AnyDesk 3.4.0
New Features:
- Sessions can now be commented on close. The comment can then be looked up on my.anydesk.com. If you don't want to comment, just clear the comment field. You will need a licence in order to use this new feature
- Address Book: AnyDesk now supports multiple address books. They can be added (up to a certain limit) and deleted. The number of available address books depends on your licence
- Status bars now also show the remote user name
Fixed Bugs:
- Fixed a crash on connecting due to monitor detection failure
- Address Book: Fixed tag validation on rename
- After elevation the backend user name in the chat was SYSTEM
Other Changes:
- Fixed and updated interfaces of installer, uninstaller, updater and global settings windows
AnyDesk 3.3.2
- Important security update. Please update if you have version 3.3.1
- Fixed a crash when using the drop to desktop feature
AnyDesk 3.3.1
- Fixed a crash on connecting due to monitor detection failure
- Fixed ACL denying access although the list is empty
AnyDesk 3.3.0
New Features:
- Address book: The name of an address can be set now on adding it to the address book
- Address book: Tags can now be renamed and removed from the tag tree view directly (on the left) Right click on a tag to choose
- Address book: Added commands 'Expand All' and 'Collapse All' to the tag tree view Right click on a tag or the tag tree view itself to choose
- Address Book: If a user action fails an error info dialog will be shown now
- When adding an address from the speed dial to the address book, a dialog will be shown now
- When connecting to a multi monitor system, AnyDesk now automatically switches to the primary monitor
Fixed Bugs:
- Fixed a crash after installing AnyDesk on Windows XP
- Address book: Fixed selected tags view layout (on top)
- Fixed service crash after installation due to invalid install parameters
- Fixed a crash on closing a session using OpenGL
- Using the mirror driver the backend detected more monitors than physically available, in case a software for virtual monitor creation is installed
Other Changes:
- Address Book: The list view now auto-sizes its columns
- Most text edits now select their content on getting keyboard focus
AnyDesk 3.2.5
- Fixed a crash after remote restart
- Fixed a bug in feature availability indicator in menu
- Fixed a bug in the address book that did not allow to add an item from the speed dial to the address book directly after startup
AnyDesk 3.2.4
Fixed Bugs:
- Fixed a bug which allowed two dialogs to be shown at the same time
- Fixed remote cursor rendering at the edges of the view
- Fixed a bug which let elevation fail when Windows denied access to the AnyDesk executable.
- Fixed a bug which led to the service shutting down automatically on elevating its backend, in case
- AnyDesk has not been installed on that side and the main window there has been closed before elevation
- Fixed the action menu showing elevation was available although the backend has been elevated already
- Fixed a race condition in the address book which made it unusable in some situations
- Fixed a bug in feature availability indicator in menu
Other changes:
- Added a hint in the elevation dialog that the remote user usually has to accept an elevation request
AnyDesk 3.2.3
Fixed Bugs:
- Fixed a regression which impaired AnyDesk's performance severely when connected to a Windows 8, 8.1 or 10 computer. Please update!
- Fixed a bug which caused the auto-reconnect feature after a remote restart to fail when the global settings dialog was opened previously
- Fixed a crash when using the "Retry" button in the remote desktop access denied dialog
- Improved stability
Other Changes:
- Improved feature availability indicator in menu
AnyDesk 3.2.2
Fixed Bugs:
- Fixed a bug which could lead to the service not starting timely after installing AnyDesk
- Fixed a crash which occured when closing the address book and terminating AnyDesk
- Fixed a crash by using ddraw as fallback for d3d when the graphics driver is not installed
- correctly and causes an exception during initialization
- Tags are validated now in the address book
Other Changes:
- Improved focus behaviour of controls
AnyDesk 3.2.1
Fixed Bugs:
- Fixed crash on adding an address to the address book
- Fixed elevation with credentials in case AnyDesk has been started from a user folder
- Fixed a crash which could occur when terminating a session with an open address book or multiple monitors
- Fixed character keyboard input which was not working for certain programs (GTK, QT) when connected from a mobile device
Other changes:
- Improved prompt shown in the password dialog when connecting
- Controls now show if focused
AnyDesk 3.2.0
New Features:
- The address book now remembers the last used view type (list/tiles)
- The address book now offers sorting options
- The address book now opens the tag dialog immediately after an address has been added
- The accept window will no longer auto-close tabs when chat messages have been sent/received
- Sessions can now be accepted via 'Enter' and dismissed via 'Esc'
- Added session status messages to chat
- The session time is now shown during a session and after disconnect
- The remote user client ID is now shown during a session (additionally to its alias)
- Your fingerprint can now be seen in the about panel
- The password for unattended access is now controlled via a dialog
You have to enter your password twice to check for misspellings
- Added language auto-selection (will select system language)
Fixed Bugs:
- Fixed WoA
- Fixed elevation with credentials
- The direct connection icon in the backend was greyed out although there was a direct connection
- The drop link feature dropped an invalid link (name instead of address)
- After disconnect it was no longer possible to mark/copy chat messages
- Fixed a crash that could occur on sending chat messages
- Some chat messages have not been recorded
- Fixed some minor bugs in the chat
- Fixed wrong message shown in the frontend on session request rejected
- Fixed some bugs with keyboard focus
- Fixed a bug with auto-selection of tabs in accept window
- Sometimes the address book did not show online states on opening it the first time
- Fixed some bugs with tag selection in the address book
- Fixed a crash that could occur when closing the main window with the address book opened
- Fixed filtering of recent connections
- Fixed recent connection being removed from favorites on name change
- In some cases a wrong text has been shown on connection request
- Fixed various minor bugs
Other Changes:
- The accept/dismiss buttons are now disabled for a short time when entering a new session state to prevent accidentally clicking them
- The accept window is now only always on top when there are not yet accepted sessions left. And it will be back on top on session request
- The accept window will now auto-select an incoming session tab in some situations
- Added bottom right resize corner
- Fixed some dpi issues
- Added some localization
AnyDesk 3.1.1
Fixed Bugs:
- Improved stability
- Fixed some bugs in the chat
- Other changes
- Signed the exe and msi files with two certificates.
AnyDesk 3.1.0
New Features:
- Reworked the chat in the client
- Added an option to disable remote restart in the security settings
Fixed Bugs:
- Fixed a bug in DeskRT which caused it to be slow on certain monitor resolutions indivisible by 16 (for example 1366x768). Responsiveness should be much higher now in these cases
- In some cases, the view mode settings for remote computers were not restored correctly for future sessions
- Fixed a crash which could occur when connecting to AnyDesk while it was terminating
- Fixed a bug which could lead to the system info feature not being available
- Improved stability
- Minor user interface layout fixes
AnyDesk 3.0.0
- Added edge scrolling feature for the original view mode: use this when the remote image is much larger than the local monitor
AnyDesk 2.6.1
New Features:
- Implemented customisation support for my.anydesk.com for macOS
Fixed Bugs:
- Enable/disable audio works now
- Receive connection window constraints were fixed
AnyDesk 2.6.0
New Features:
- Implemented Access Control List feature. This makes it possible to restrict access to machines based on the alias. Wildcards are supported, for example "*@company", "pc-?@ad" and so on. Restrictions based solely on the numerical id are also supported. You can find the feature in the Security Panel of the AnyDesk settings.
Fixed Bugs:
- Fixed a bug where the file transfer and probably the text clipboard did not work on Windows 7 when UAC was disabled and AnyDesk was not installed.
- Fixed a regression which could lead to being unable to control the remote machine after activating a privileged window in the task bar when AnyDesk was not installed.
- Fixed a bug which could cause severe image lag after using the "switch sides" or "request elevation" features or doing a fast user switch of a remote controlled Windows session.
Other Changes:
- The remote users input is now temporarily disabled when typing on the local keyboard. In previous versions, only moving the mouse disabled remote input.
AnyDesk 2.5.0
New Features:
- Implemented remote restart feature: The connection will automatically be restored once the remote machine finished restarting
- Added a confirmation dialog for the switch sides feature
- The coloured user pointer can now be disabled in the security settings
Fixed Bugs:
- Fixed a bug which could lead to a wrong aspect ratio image or no image at all when connecting to a multi monitor system until the first resize of the session window
- Fixed image corruption which could occur when the mirror driver was used
- Fixed some inconsistencies in the remote capabilities for the request elevation and the switch sides feature when connecting between different platforms
- Improved stability
Other Changes:
- The uninstaller (anydesk --remove) now accepts the --silent flag
AnyDesk 2.3.5
Fixed Bugs:
- Fixed image capture when connecting to outdated Windows 7 versions
- Fixed a bug in the license registration dialog
Other Changes:
- Long IDs are now displayed in groups of 3 digits
AnyDesk 2.3.4
Fixed Bugs
- Fixed image problems with 16-bit/fast rendering method.
- Fixed a few more high DPI issues.
- Fixed protocol compatibility with the Enterprise server.
- Fixed a crash that could occur when the system info tab was opened a second time.
- The system info tab could be opened before authentication, which resulted in a crash.
更新時間：2018-08-23
更新細節：
What's new in this version:
BluffTitler 14.1.0.3
- 1 old effect converted: V11_ReflectiveWater_CubemapDDS
- 1 new option: Max texture resolution
- Redesigned effect thumbnails
- Bugfix: Pre-export simulation time now works with particles attached to a picture layer
- Bugfix: mirror, colourmap and cubemap layers can now be saved as a preset
BluffTitler 14.1.0.2
- Change log not available fro this version
BluffTitler 14.1.0.1
- updated translation:Chinese(Simplified)
- new effects:Special/ClipAdditive & Filters/JigsawPuzzle
BluffTitler 14.1.0.0
- 8 updated translations: Suomi, Francais, Turkce, Magyar, Tamil, Arabic, Svenska & Italiano
- Optimization: loading big models is a lot faster
- Water layer is now double sided
- 1 new property in the particle layer: Min distance
- Option to use fog colour as background colour in FILE > Set background colour... dialog
- Pixel media: new textures, new shows and a new model
- Show duration is no longer rounded off to whole seconds. You can now, for example, enter 2.5 in the FILE > Set show duration... dialog
- 2 new effects: Special/NormalMapper and Special/Octopus
- 1 old effect converted: V11_ReflectiveWater_CubemapDDS
- 1 new option: Max texture resolution Learn more
- Redesigned effect thumbnails
- Bugfix: Pre-export simulation time now works with particles attached to a picture layer
- Bugfix: mirror, colourmap and cubemap layers can now be saved as a preset
BluffTitler 14.0.0.3
- Optimization: loading big models is a lot faster
- Water layer is now double sided
- Pixel media: new textures, new shows and a new model
BluffTitler 14.0.0.2
- Change log not available for this version
BluffTitler 14.0.0.1
- Change log not available for this version
BluffTitler 14.0.0.0
- Realtime procedural HDR displacement maps with the plasma layer Learn more | See examples
- Emoji 5.0 Learn more
- Fog without shader Learn more
- Improved font engine: ligatures, glyph variants, non-Latin scripts and smooth bezier curves. Learn more
- Sketch layer can now render roller coasters and tunnels Learn more | See examples
- Fast shadows Learn more
- VJ dialog Learn more | See examples
- Support for HDR pictures
- Support for WIC. With the right codecs installed, BluffTitler can now load PSD, EXR, HDR, RAW and many more files. Learn more
- Apply effects to cameralayer attached to colourmap layer
- 7 new effects: AdvancedMaterials/Flat, Filters/UVClamper, Filters/Opaque, Filters/Stroke, Filters/AlphaThreshold, ProceduralTextures/Chrome and ProceduralTextures/RGB
- 7 new properties in the camera layer: Fog range, Fog colour, Colour intensity, Fade colour, Fade stage, Target layer and Active camera
- 1 new style in the text layer: Box
- 1 new property in the text layer: Texture mapping
- 1 new property in the EPS layer: Characters
- 2 new styles in the picture layer: Egg and Sphere cap
- 8 new properties in the sketch layer: Offset, Pen rotation, Gravity, Friction, Initial speed, Minimum speed, Writer offset, Pen size and Smooth
- 5 new styles in the sketch layer: Closed, Open, Halfpipe, Rails and Star
- 5 new styles in the plasma layer styles: Solid, Spots, Perlin noise, LDR colourmap and HDR displacementmap
- 2 new propertyies in the plasma layer: Start time and Border size
- 3 new properties in the particle layer: Time dilation, Launch normal and Launch normal tolerance
- 2 new styles in the colourmap layer: LDR and HDR
- 3 new options: Open all shows in the same resolution, Emoji font and Prefer installer effects Learn more
- Attach container layers to camera layers
- Attach camera layers to container layers
- Attach camera and container layers to sketch layers
- Attach plasma layers to landscape layers
- Improved: displacement mapping tessellation increased Learn more | See examples
- Improved: plasma layer resolution doubled See examples
- Improved: blob particles (metaballs) Learn more
- Improved: water layer Learn more | See examples
- Improved: file dialog easier to use Learn more
- Optimization: 2D GUI rendering is a lot faster (Direct2D)
- Optimization: loading big shows
- Removed: default show in options dialog
- Removed: post render command
- Removed: Shadow softness property in light layer
更新時間：2018-08-20
更新細節：
What's new in this version:
Changes:
- Major improvements to the browser source:Added hardware acceleration to the browser source on Windows for greatly improved performance, reduced resources, and allowing advanced rendering functionality such as WebGL. This reduces CPU usage, reduces RAM usage, and even reduces GPU usage. This option is enabled by default; it can be disabled in the advanced section of settings if needed if there are any unexpected issues; Updated to Chromium version 68; Refactored the entire plugin and pruned approximately 13,000 lines of code (very satisfying for me in particular); The browser source now has accurate frame synchronization on Windows; Fixed all memory leaks of the browser source; Added the ability to use web browsers as widgets (which isn't currently exposed much, but will allow a lot more custom functionality later)
- Added source grouping, allowing the ability to group multiple sources together as a single transformable group: To add a group, you can either select a few sources and then right-click and choose "Group Selected Items", or you can create an empty group in the Add menu; You can seamlessly drag and drop items in and out of groups; You can ungroup a group without affecting the group in other scenes by right-clicking the group and choosing "Ungroup"; Groups show their list of sources as a sub-list within the main scene list, which can be collapsed and hidden if desired; Groups can be referenced (shared) between multiple scenes like any other source; Groups can have their own effect filters applied to them
- Added the ability to set a custom background color to items within the source list to color-code them for improved organization: To set the item's background color, right-click the source item within the source list, and go to "Set Color"; You can use a preset selection of colors within the menu, you can choose a custom color, or you can reset it to default
- Added a "Vertical Layout" option to the mixer's right-click context menu to make the mixer display vertically rather than horizontally
- The multiview can now be configured to show up to 24 scenes at once in general settings if desired
- Added an option to audio settings to allow the user to change the audio meter type: "Sample Peak" and "True Peak"
- Added secure streaming (RTMPS) support for services that support it, such as Facebook
- It is now possible to use more than one Intel QSV encoder at once
- It is now possible to use alt-cropping even on sources that are set to a bounding box transform. This fixes the issue where, for example, alt-cropping would not work after you pressed Ctrl-F on a source. Note that in that case, the rectangle's size will not change, but the contents will realign to the rectangle
- Windowed projectors are now saved and loaded on shutdown/startup
- Audio sources within the mixer now always displayed alphabetically
- Significantly reduced GPU usage when the program is idle (I.E. when the program is not streaming or recording)
- Added a confirmation dialog when the user has not added video sources to any scenes, warning them that they are about to stream a blank screen. This ensures that new users do not inadvertently stream without at least first adding some sources
- The program will now default to the NVIDIA GPU when on laptops that have both NVIDIA and Intel integrated adapters. This can still be overridden in the NVIDIA control panel if desired
Bug fixes:
- Fixed a bug where the browser source wouldn't read local files properly
- Fixed a bug where videos recorded with certain formats would report that they were 1000 FPS in their metadata when they actually weren't
- Fixed a bug where the active monitoring device wouldn't properly change when switching between profiles
- Fixed a bug where pasting filters without a destination source selected would cause a crash
- Fixed a bug where projectors would close whenever "Always On Top" was toggled
- Fixed a bug where the recording option "Generate file without space" was not working with the replay buffer
- Fixed a bug where certain size cursors would appear the incorrect size in Game/Window/Display captures on Windows
- Fixed a bug where in-program hyperlinks would show up with a bad contrast (dark blue) even in dark themes
- Fixed a bug where stream output would stop if a stinger transition had a very late transition point assigned to it (an invalid floating point calculation would be put in to the audio data, which would in turn cause the audio encoder to fail and stop encoding, and thus stream output to stop)
- Fixed a bug on macOS where VLC would not be found for the VLC source despite VLC being installed
- Fixed a bug on macOS where audio monitoring devices would not show up correctly, and fixed a few minor issues with audio monitoring on macOS
- Fixed a bug where Mixer's FTL service would cause a crash on macOS
- Fixed a bug where the color property (when showing the properties of sources/filters) would not show the actual color the user had set it to
- Fixed a bug where hotkey labels would not update when sources and transitions are renamed, and could cause the hotkey to not be saved correctly
- Fixed a bug where creating a new profile with advanced output mode active would not enforce the service's settings (such as keyframe interval)
- Fixed a bug where hotkeys for start streaming and stop streaming would disappear when going in/out of studio mode
- Fixed a few minor memory leaks
更新時間：2018-07-20
更新細節：
What's new in this version:
AnyDesk 4.2.2
Fixed Bugs:
- An alias could not be registered in case '@ad' was not appended
Other Changes:
- On successful alias registration a hint is shown, that the user has to take care of his alias and ID on his/her own
AnyDesk 4.2.1
- Fixed a crash which could occur after one minute when there is no mouse attached to the system
- Fixed packets being dumped which should only be dumped in debug mode
- Fixed a rare crash which occured immediately after starting AnyDesk
AnyDesk 4.2.0
New Features:
- Clipboard file transfer can now be disabled in the security settings
- The preview image can now be disabled in the privacy settings
- Most of the edits now support 'Ctrl'+'A'
- The session comment section can now be disabled where it appears
Fixed Bugs:
- Fixed a crash in D3D render mode
- Fixed a crash related to the 'Follow remote mouse cursor' feature
- Fixed a bug which made it possible to set up a password which did not meet the password safety requirements of AnyDesk for unattended access
- Fixed a race condition that could occur during requesting an alias
- When pasting a file after disabling the clipboard, the file copy operation got stuck
- The file copy operation is cancelled now when clipboard sync is disabled
- Fixed a rare bug which made AnyDesk crash immediately on startup
AnyDesk 4.1.3
- Made the session comment section multiline again
- The disclaimer did not show up again, when it was rejected the last time AnyDesk started and has not been changed in the meantime
- File transfer sessions no longer transmit hotkeys
- Fixed DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah of Fortinet's FortiGuard Labs for reporting this vulnerability to us
AnyDesk 4.1.2
- Fixed a bug in the security panel which made it impossible to set a password
- Fixed navigation to the drive selection view in file transfer mode
AnyDesk 4.1.0
Security Fixes:
- Prevented DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah from Fortinet for reporting this vulnerability to us
- Updated OpenSSL library to the latest version
Fixed Bugs:
- Fixed monitor reactivation when the monitor is in sleep mode and there is an incoming connection
- Fixed manual update link when auto-update is disabled
- Fixed a bug that prevented further connections to a computer, if a previous connection to that computer failed
- Fixed keyboard problems that occurred in conjunction with the right shift button
Other Changes:
- If a disclaimer has been set up, it will be shown on every change even if AnyDesk is installed already
- Most of the edits in AnyDesk now support context menu operations (paste, cut, clear, undo)
- AnyDesk will no longer follow the remote cursor when the local user changed the tab himself
- Improved address book update performance
AnyDesk 4.0.1
Fixed Bugs:
- SAS for Windows 8 and upwards was broken due to an extension handling Terminal Server
- On Terminal Server switching to advanced view may have resulted in a crash
AnyDesk 4.0.0
Extended support for Terminal Server:
- On connecting to a terminal server the user can choose now if to connect to the console session or a specific user. As an alternative a fully specified address can be used to directly connect to a a specific user
- Added file manager session type. The file manager can also be used during a normal session
- Session recording and playback. Enable this option under "privacy" in the options tab
- Optional auto-locking of the Windows session on AnyDesk session end
- Follow mouse cursor feature: When activated, the monitor selection follows the remote mouse cursor
- Auto-Update
- The user can now choose an alias
- Client Generator: Updates can now be disabled
AnyDesk 3.7.0
Fixed Bugs:
- Security change: fixed a bug where the permissions could be reset during the session
- In some cases, the AnyDesk main window was not rendered correctly in Windows 10 (showing transparent areas)
AnyDesk 3.6.3
- Fixed a crash when terminating AnyDesk using the tray icon while sessions were running
- Under rare conditions, connecting to Windows 10 showed no image/a black image
- Clipboard permission works again
- Disallowed to change the license key if settings are disabled
- Fixed SAS (Ctrl+Alt+Del) which did not work under some conditions on Windows Vista and upwards.On some Windows 10 systems, AnyDesk did not work when the monitor was rotated. On these systems, AnyDesk should now transmit the monitor content normally
- Fixed two rarely occuring crashes on address book close
AnyDesk 3.6.2
Fixed Bugs:
- Trying to add an address from the speed dial to an address book with a license of type free or lite
- opened a dialog instead of the address book
- Fixed screensaver settings on AnyDesk session close. This was broken due to a bug in Windows
- Fixed session comment dialog which could appear twice
Other Changes:
- Made license key removal more explicit and added option 'Change license key' to the main menu
AnyDesk 3.6.1
- Fixed Bugs
- Important security update, fixed dll injection vulnerability. Thanks to 0x09AL for reporting this
AnyDesk 3.6.0
- Transmission of system information can now be blocked. Older versions of AnyDesk will show useless information in this case
- Added a setting to disable the chat log
- Added a setting to choose the path to the chat log
- Added a setting to show the address book on startup
- Added a setting to allow the accept window to go to foreground on chat message received
AnyDesk 3.5.0
New Features:
- The remote restart feature now even works when AnyDesk is not installed
- Please note: You will need to request elevation from the remote user before using the restart feature in this case
- Custom AnyDesk: Text and title of ID and Connect Group (Main Window) can now be customized
- Custom AnyDesk: Before frontend startup a disclaimer can be shown now, which can be customized in logo, title, text, background color and the text on the accept and cancel buttons. It is shown only, if AnyDesk is not installed and the text contains non-whitespaces. All other settings are optional
- Custom AnyDesk: Added support for environment variables in paths
Fixed Bugs:
- In the D3D fullscreen menu the keyboard mode has always been set to 'translate'
- The invitation link in the main window has not been shown anymore after switching to advanced view and back
- Fixed crash on opening the chat log in the backend after session close
- Fixed crash when the session info panel was closed before the remote data was displayed
Fixed Bugs:
- Fixed custom logo layout in the main window's advanced view
- Fixed the connection panel's password edit showing clear text when disabled
AnyDesk 3.4.1
- Fixed dpi of comment session dialog
- Fixed that the comment session dialog can be shown although the licence is of type Lite
- Fixed a crash related to the comment session dialog
- Fixed that the character right of '9' on the standard hungarian keyboard layout has not been recognized before
AnyDesk 3.4.0
New Features:
- Sessions can now be commented on close. The comment can then be looked up on my.anydesk.com. If you don't want to comment, just clear the comment field. You will need a licence in order to use this new feature
- Address Book: AnyDesk now supports multiple address books. They can be added (up to a certain limit) and deleted. The number of available address books depends on your licence
- Status bars now also show the remote user name
Fixed Bugs:
- Fixed a crash on connecting due to monitor detection failure
- Address Book: Fixed tag validation on rename
- After elevation the backend user name in the chat was SYSTEM
Other Changes:
- Fixed and updated interfaces of installer, uninstaller, updater and global settings windows
AnyDesk 3.3.2
- Important security update. Please update if you have version 3.3.1
- Fixed a crash when using the drop to desktop feature
AnyDesk 3.3.1
- Fixed a crash on connecting due to monitor detection failure
- Fixed ACL denying access although the list is empty
AnyDesk 3.3.0
New Features:
- Address book: The name of an address can be set now on adding it to the address book
- Address book: Tags can now be renamed and removed from the tag tree view directly (on the left) Right click on a tag to choose
- Address book: Added commands 'Expand All' and 'Collapse All' to the tag tree view Right click on a tag or the tag tree view itself to choose
- Address Book: If a user action fails an error info dialog will be shown now
- When adding an address from the speed dial to the address book, a dialog will be shown now
- When connecting to a multi monitor system, AnyDesk now automatically switches to the primary monitor
Fixed Bugs:
- Fixed a crash after installing AnyDesk on Windows XP
- Address book: Fixed selected tags view layout (on top)
- Fixed service crash after installation due to invalid install parameters
- Fixed a crash on closing a session using OpenGL
- Using the mirror driver the backend detected more monitors than physically available, in case a software for virtual monitor creation is installed
Other Changes:
- Address Book: The list view now auto-sizes its columns
- Most text edits now select their content on getting keyboard focus
AnyDesk 3.2.5
- Fixed a crash after remote restart
- Fixed a bug in feature availability indicator in menu
- Fixed a bug in the address book that did not allow to add an item from the speed dial to the address book directly after startup
AnyDesk 3.2.4
Fixed Bugs:
- Fixed a bug which allowed two dialogs to be shown at the same time
- Fixed remote cursor rendering at the edges of the view
- Fixed a bug which let elevation fail when Windows denied access to the AnyDesk executable.
- Fixed a bug which led to the service shutting down automatically on elevating its backend, in case
- AnyDesk has not been installed on that side and the main window there has been closed before elevation
- Fixed the action menu showing elevation was available although the backend has been elevated already
- Fixed a race condition in the address book which made it unusable in some situations
- Fixed a bug in feature availability indicator in menu
Other changes:
- Added a hint in the elevation dialog that the remote user usually has to accept an elevation request
AnyDesk 3.2.3
Fixed Bugs:
- Fixed a regression which impaired AnyDesk's performance severely when connected to a Windows 8, 8.1 or 10 computer. Please update!
- Fixed a bug which caused the auto-reconnect feature after a remote restart to fail when the global settings dialog was opened previously
- Fixed a crash when using the "Retry" button in the remote desktop access denied dialog
- Improved stability
Other Changes:
- Improved feature availability indicator in menu
AnyDesk 3.2.2
Fixed Bugs:
- Fixed a bug which could lead to the service not starting timely after installing AnyDesk
- Fixed a crash which occured when closing the address book and terminating AnyDesk
- Fixed a crash by using ddraw as fallback for d3d when the graphics driver is not installed
- correctly and causes an exception during initialization
- Tags are validated now in the address book
Other Changes:
- Improved focus behaviour of controls
AnyDesk 3.2.1
Fixed Bugs:
- Fixed crash on adding an address to the address book
- Fixed elevation with credentials in case AnyDesk has been started from a user folder
- Fixed a crash which could occur when terminating a session with an open address book or multiple monitors
- Fixed character keyboard input which was not working for certain programs (GTK, QT) when connected from a mobile device
Other changes:
- Improved prompt shown in the password dialog when connecting
- Controls now show if focused
AnyDesk 3.2.0
New Features:
- The address book now remembers the last used view type (list/tiles)
- The address book now offers sorting options
- The address book now opens the tag dialog immediately after an address has been added
- The accept window will no longer auto-close tabs when chat messages have been sent/received
- Sessions can now be accepted via 'Enter' and dismissed via 'Esc'
- Added session status messages to chat
- The session time is now shown during a session and after disconnect
- The remote user client ID is now shown during a session (additionally to its alias)
- Your fingerprint can now be seen in the about panel
- The password for unattended access is now controlled via a dialog
You have to enter your password twice to check for misspellings
- Added language auto-selection (will select system language)
Fixed Bugs:
- Fixed WoA
- Fixed elevation with credentials
- The direct connection icon in the backend was greyed out although there was a direct connection
- The drop link feature dropped an invalid link (name instead of address)
- After disconnect it was no longer possible to mark/copy chat messages
- Fixed a crash that could occur on sending chat messages
- Some chat messages have not been recorded
- Fixed some minor bugs in the chat
- Fixed wrong message shown in the frontend on session request rejected
- Fixed some bugs with keyboard focus
- Fixed a bug with auto-selection of tabs in accept window
- Sometimes the address book did not show online states on opening it the first time
- Fixed some bugs with tag selection in the address book
- Fixed a crash that could occur when closing the main window with the address book opened
- Fixed filtering of recent connections
- Fixed recent connection being removed from favorites on name change
- In some cases a wrong text has been shown on connection request
- Fixed various minor bugs
Other Changes:
- The accept/dismiss buttons are now disabled for a short time when entering a new session state to prevent accidentally clicking them
- The accept window is now only always on top when there are not yet accepted sessions left. And it will be back on top on session request
- The accept window will now auto-select an incoming session tab in some situations
- Added bottom right resize corner
- Fixed some dpi issues
- Added some localization
AnyDesk 3.1.1
Fixed Bugs:
- Improved stability
- Fixed some bugs in the chat
- Other changes
- Signed the exe and msi files with two certificates.
AnyDesk 3.1.0
New Features:
- Reworked the chat in the client
- Added an option to disable remote restart in the security settings
Fixed Bugs:
- Fixed a bug in DeskRT which caused it to be slow on certain monitor resolutions indivisible by 16 (for example 1366x768). Responsiveness should be much higher now in these cases
- In some cases, the view mode settings for remote computers were not restored correctly for future sessions
- Fixed a crash which could occur when connecting to AnyDesk while it was terminating
- Fixed a bug which could lead to the system info feature not being available
- Improved stability
- Minor user interface layout fixes
AnyDesk 3.0.0
- Added edge scrolling feature for the original view mode: use this when the remote image is much larger than the local monitor
AnyDesk 2.6.1
New Features:
- Implemented customisation support for my.anydesk.com for macOS
Fixed Bugs:
- Enable/disable audio works now
- Receive connection window constraints were fixed
AnyDesk 2.6.0
New Features:
- Implemented Access Control List feature. This makes it possible to restrict access to machines based on the alias. Wildcards are supported, for example "*@company", "pc-?@ad" and so on. Restrictions based solely on the numerical id are also supported. You can find the feature in the Security Panel of the AnyDesk settings.
Fixed Bugs:
- Fixed a bug where the file transfer and probably the text clipboard did not work on Windows 7 when UAC was disabled and AnyDesk was not installed.
- Fixed a regression which could lead to being unable to control the remote machine after activating a privileged window in the task bar when AnyDesk was not installed.
- Fixed a bug which could cause severe image lag after using the "switch sides" or "request elevation" features or doing a fast user switch of a remote controlled Windows session.
Other Changes:
- The remote users input is now temporarily disabled when typing on the local keyboard. In previous versions, only moving the mouse disabled remote input.
AnyDesk 2.5.0
New Features:
- Implemented remote restart feature: The connection will automatically be restored once the remote machine finished restarting
- Added a confirmation dialog for the switch sides feature
- The coloured user pointer can now be disabled in the security settings
Fixed Bugs:
- Fixed a bug which could lead to a wrong aspect ratio image or no image at all when connecting to a multi monitor system until the first resize of the session window
- Fixed image corruption which could occur when the mirror driver was used
- Fixed some inconsistencies in the remote capabilities for the request elevation and the switch sides feature when connecting between different platforms
- Improved stability
Other Changes:
- The uninstaller (anydesk --remove) now accepts the --silent flag
AnyDesk 2.3.5
Fixed Bugs:
- Fixed image capture when connecting to outdated Windows 7 versions
- Fixed a bug in the license registration dialog
Other Changes:
- Long IDs are now displayed in groups of 3 digits
AnyDesk 2.3.4
Fixed Bugs
- Fixed image problems with 16-bit/fast rendering method.
- Fixed a few more high DPI issues.
- Fixed protocol compatibility with the Enterprise server.
- Fixed a crash that could occur when the system info tab was opened a second time.
- The system info tab could be opened before authentication, which resulted in a crash.
更新時間：2018-07-18
更新細節：
What's new in this version:
AnyDesk 4.2.1
- Fixed a crash which could occur after one minute when there is no mouse attached to the system
- Fixed packets being dumped which should only be dumped in debug mode
- Fixed a rare crash which occured immediately after starting AnyDesk
AnyDesk 4.2.0
New Features:
- Clipboard file transfer can now be disabled in the security settings
- The preview image can now be disabled in the privacy settings
- Most of the edits now support 'Ctrl'+'A'
- The session comment section can now be disabled where it appears
Fixed Bugs:
- Fixed a crash in D3D render mode
- Fixed a crash related to the 'Follow remote mouse cursor' feature
- Fixed a bug which made it possible to set up a password which did not meet the password safety requirements of AnyDesk for unattended access
- Fixed a race condition that could occur during requesting an alias
- When pasting a file after disabling the clipboard, the file copy operation got stuck
- The file copy operation is cancelled now when clipboard sync is disabled
- Fixed a rare bug which made AnyDesk crash immediately on startup
AnyDesk 4.1.3
- Made the session comment section multiline again
- The disclaimer did not show up again, when it was rejected the last time AnyDesk started and has not been changed in the meantime
- File transfer sessions no longer transmit hotkeys
- Fixed DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah of Fortinet's FortiGuard Labs for reporting this vulnerability to us
AnyDesk 4.1.2
- Fixed a bug in the security panel which made it impossible to set a password
- Fixed navigation to the drive selection view in file transfer mode
AnyDesk 4.1.0
Security Fixes:
- Prevented DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah from Fortinet for reporting this vulnerability to us
- Updated OpenSSL library to the latest version
Fixed Bugs:
- Fixed monitor reactivation when the monitor is in sleep mode and there is an incoming connection
- Fixed manual update link when auto-update is disabled
- Fixed a bug that prevented further connections to a computer, if a previous connection to that computer failed
- Fixed keyboard problems that occurred in conjunction with the right shift button
Other Changes:
- If a disclaimer has been set up, it will be shown on every change even if AnyDesk is installed already
- Most of the edits in AnyDesk now support context menu operations (paste, cut, clear, undo)
- AnyDesk will no longer follow the remote cursor when the local user changed the tab himself
- Improved address book update performance
AnyDesk 4.0.1
Fixed Bugs:
- SAS for Windows 8 and upwards was broken due to an extension handling Terminal Server
- On Terminal Server switching to advanced view may have resulted in a crash
AnyDesk 4.0.0
Extended support for Terminal Server:
- On connecting to a terminal server the user can choose now if to connect to the console session or a specific user. As an alternative a fully specified address can be used to directly connect to a a specific user
- Added file manager session type. The file manager can also be used during a normal session
- Session recording and playback. Enable this option under "privacy" in the options tab
- Optional auto-locking of the Windows session on AnyDesk session end
- Follow mouse cursor feature: When activated, the monitor selection follows the remote mouse cursor
- Auto-Update
- The user can now choose an alias
- Client Generator: Updates can now be disabled
AnyDesk 3.7.0
Fixed Bugs:
- Security change: fixed a bug where the permissions could be reset during the session
- In some cases, the AnyDesk main window was not rendered correctly in Windows 10 (showing transparent areas)
AnyDesk 3.6.3
- Fixed a crash when terminating AnyDesk using the tray icon while sessions were running
- Under rare conditions, connecting to Windows 10 showed no image/a black image
- Clipboard permission works again
- Disallowed to change the license key if settings are disabled
- Fixed SAS (Ctrl+Alt+Del) which did not work under some conditions on Windows Vista and upwards.On some Windows 10 systems, AnyDesk did not work when the monitor was rotated. On these systems, AnyDesk should now transmit the monitor content normally
- Fixed two rarely occuring crashes on address book close
AnyDesk 3.6.2
Fixed Bugs:
- Trying to add an address from the speed dial to an address book with a license of type free or lite
- opened a dialog instead of the address book
- Fixed screensaver settings on AnyDesk session close. This was broken due to a bug in Windows
- Fixed session comment dialog which could appear twice
Other Changes:
- Made license key removal more explicit and added option 'Change license key' to the main menu
AnyDesk 3.6.1
- Fixed Bugs
- Important security update, fixed dll injection vulnerability. Thanks to 0x09AL for reporting this
AnyDesk 3.6.0
- Transmission of system information can now be blocked. Older versions of AnyDesk will show useless information in this case
- Added a setting to disable the chat log
- Added a setting to choose the path to the chat log
- Added a setting to show the address book on startup
- Added a setting to allow the accept window to go to foreground on chat message received
AnyDesk 3.5.0
New Features:
- The remote restart feature now even works when AnyDesk is not installed
- Please note: You will need to request elevation from the remote user before using the restart feature in this case
- Custom AnyDesk: Text and title of ID and Connect Group (Main Window) can now be customized
- Custom AnyDesk: Before frontend startup a disclaimer can be shown now, which can be customized in logo, title, text, background color and the text on the accept and cancel buttons. It is shown only, if AnyDesk is not installed and the text contains non-whitespaces. All other settings are optional
- Custom AnyDesk: Added support for environment variables in paths
Fixed Bugs:
- In the D3D fullscreen menu the keyboard mode has always been set to 'translate'
- The invitation link in the main window has not been shown anymore after switching to advanced view and back
- Fixed crash on opening the chat log in the backend after session close
- Fixed crash when the session info panel was closed before the remote data was displayed
Fixed Bugs:
- Fixed custom logo layout in the main window's advanced view
- Fixed the connection panel's password edit showing clear text when disabled
AnyDesk 3.4.1
- Fixed dpi of comment session dialog
- Fixed that the comment session dialog can be shown although the licence is of type Lite
- Fixed a crash related to the comment session dialog
- Fixed that the character right of '9' on the standard hungarian keyboard layout has not been recognized before
AnyDesk 3.4.0
New Features:
- Sessions can now be commented on close. The comment can then be looked up on my.anydesk.com. If you don't want to comment, just clear the comment field. You will need a licence in order to use this new feature
- Address Book: AnyDesk now supports multiple address books. They can be added (up to a certain limit) and deleted. The number of available address books depends on your licence
- Status bars now also show the remote user name
Fixed Bugs:
- Fixed a crash on connecting due to monitor detection failure
- Address Book: Fixed tag validation on rename
- After elevation the backend user name in the chat was SYSTEM
Other Changes:
- Fixed and updated interfaces of installer, uninstaller, updater and global settings windows
AnyDesk 3.3.2
- Important security update. Please update if you have version 3.3.1
- Fixed a crash when using the drop to desktop feature
AnyDesk 3.3.1
- Fixed a crash on connecting due to monitor detection failure
- Fixed ACL denying access although the list is empty
AnyDesk 3.3.0
New Features:
- Address book: The name of an address can be set now on adding it to the address book
- Address book: Tags can now be renamed and removed from the tag tree view directly (on the left) Right click on a tag to choose
- Address book: Added commands 'Expand All' and 'Collapse All' to the tag tree view Right click on a tag or the tag tree view itself to choose
- Address Book: If a user action fails an error info dialog will be shown now
- When adding an address from the speed dial to the address book, a dialog will be shown now
- When connecting to a multi monitor system, AnyDesk now automatically switches to the primary monitor
Fixed Bugs:
- Fixed a crash after installing AnyDesk on Windows XP
- Address book: Fixed selected tags view layout (on top)
- Fixed service crash after installation due to invalid install parameters
- Fixed a crash on closing a session using OpenGL
- Using the mirror driver the backend detected more monitors than physically available, in case a software for virtual monitor creation is installed
Other Changes:
- Address Book: The list view now auto-sizes its columns
- Most text edits now select their content on getting keyboard focus
AnyDesk 3.2.5
- Fixed a crash after remote restart
- Fixed a bug in feature availability indicator in menu
- Fixed a bug in the address book that did not allow to add an item from the speed dial to the address book directly after startup
AnyDesk 3.2.4
Fixed Bugs:
- Fixed a bug which allowed two dialogs to be shown at the same time
- Fixed remote cursor rendering at the edges of the view
- Fixed a bug which let elevation fail when Windows denied access to the AnyDesk executable.
- Fixed a bug which led to the service shutting down automatically on elevating its backend, in case
- AnyDesk has not been installed on that side and the main window there has been closed before elevation
- Fixed the action menu showing elevation was available although the backend has been elevated already
- Fixed a race condition in the address book which made it unusable in some situations
- Fixed a bug in feature availability indicator in menu
Other changes:
- Added a hint in the elevation dialog that the remote user usually has to accept an elevation request
AnyDesk 3.2.3
Fixed Bugs:
- Fixed a regression which impaired AnyDesk's performance severely when connected to a Windows 8, 8.1 or 10 computer. Please update!
- Fixed a bug which caused the auto-reconnect feature after a remote restart to fail when the global settings dialog was opened previously
- Fixed a crash when using the "Retry" button in the remote desktop access denied dialog
- Improved stability
Other Changes:
- Improved feature availability indicator in menu
AnyDesk 3.2.2
Fixed Bugs:
- Fixed a bug which could lead to the service not starting timely after installing AnyDesk
- Fixed a crash which occured when closing the address book and terminating AnyDesk
- Fixed a crash by using ddraw as fallback for d3d when the graphics driver is not installed
- correctly and causes an exception during initialization
- Tags are validated now in the address book
Other Changes:
- Improved focus behaviour of controls
AnyDesk 3.2.1
Fixed Bugs:
- Fixed crash on adding an address to the address book
- Fixed elevation with credentials in case AnyDesk has been started from a user folder
- Fixed a crash which could occur when terminating a session with an open address book or multiple monitors
- Fixed character keyboard input which was not working for certain programs (GTK, QT) when connected from a mobile device
Other changes:
- Improved prompt shown in the password dialog when connecting
- Controls now show if focused
AnyDesk 3.2.0
New Features:
- The address book now remembers the last used view type (list/tiles)
- The address book now offers sorting options
- The address book now opens the tag dialog immediately after an address has been added
- The accept window will no longer auto-close tabs when chat messages have been sent/received
- Sessions can now be accepted via 'Enter' and dismissed via 'Esc'
- Added session status messages to chat
- The session time is now shown during a session and after disconnect
- The remote user client ID is now shown during a session (additionally to its alias)
- Your fingerprint can now be seen in the about panel
- The password for unattended access is now controlled via a dialog
You have to enter your password twice to check for misspellings
- Added language auto-selection (will select system language)
Fixed Bugs:
- Fixed WoA
- Fixed elevation with credentials
- The direct connection icon in the backend was greyed out although there was a direct connection
- The drop link feature dropped an invalid link (name instead of address)
- After disconnect it was no longer possible to mark/copy chat messages
- Fixed a crash that could occur on sending chat messages
- Some chat messages have not been recorded
- Fixed some minor bugs in the chat
- Fixed wrong message shown in the frontend on session request rejected
- Fixed some bugs with keyboard focus
- Fixed a bug with auto-selection of tabs in accept window
- Sometimes the address book did not show online states on opening it the first time
- Fixed some bugs with tag selection in the address book
- Fixed a crash that could occur when closing the main window with the address book opened
- Fixed filtering of recent connections
- Fixed recent connection being removed from favorites on name change
- In some cases a wrong text has been shown on connection request
- Fixed various minor bugs
Other Changes:
- The accept/dismiss buttons are now disabled for a short time when entering a new session state to prevent accidentally clicking them
- The accept window is now only always on top when there are not yet accepted sessions left. And it will be back on top on session request
- The accept window will now auto-select an incoming session tab in some situations
- Added bottom right resize corner
- Fixed some dpi issues
- Added some localization
AnyDesk 3.1.1
Fixed Bugs:
- Improved stability
- Fixed some bugs in the chat
- Other changes
- Signed the exe and msi files with two certificates.
AnyDesk 3.1.0
New Features:
- Reworked the chat in the client
- Added an option to disable remote restart in the security settings
Fixed Bugs:
- Fixed a bug in DeskRT which caused it to be slow on certain monitor resolutions indivisible by 16 (for example 1366x768). Responsiveness should be much higher now in these cases
- In some cases, the view mode settings for remote computers were not restored correctly for future sessions
- Fixed a crash which could occur when connecting to AnyDesk while it was terminating
- Fixed a bug which could lead to the system info feature not being available
- Improved stability
- Minor user interface layout fixes
AnyDesk 3.0.0
- Added edge scrolling feature for the original view mode: use this when the remote image is much larger than the local monitor
AnyDesk 2.6.1
New Features:
- Implemented customisation support for my.anydesk.com for macOS
Fixed Bugs:
- Enable/disable audio works now
- Receive connection window constraints were fixed
AnyDesk 2.6.0
New Features:
- Implemented Access Control List feature. This makes it possible to restrict access to machines based on the alias. Wildcards are supported, for example "*@company", "pc-?@ad" and so on. Restrictions based solely on the numerical id are also supported. You can find the feature in the Security Panel of the AnyDesk settings.
Fixed Bugs:
- Fixed a bug where the file transfer and probably the text clipboard did not work on Windows 7 when UAC was disabled and AnyDesk was not installed.
- Fixed a regression which could lead to being unable to control the remote machine after activating a privileged window in the task bar when AnyDesk was not installed.
- Fixed a bug which could cause severe image lag after using the "switch sides" or "request elevation" features or doing a fast user switch of a remote controlled Windows session.
Other Changes:
- The remote users input is now temporarily disabled when typing on the local keyboard. In previous versions, only moving the mouse disabled remote input.
AnyDesk 2.5.0
New Features:
- Implemented remote restart feature: The connection will automatically be restored once the remote machine finished restarting
- Added a confirmation dialog for the switch sides feature
- The coloured user pointer can now be disabled in the security settings
Fixed Bugs:
- Fixed a bug which could lead to a wrong aspect ratio image or no image at all when connecting to a multi monitor system until the first resize of the session window
- Fixed image corruption which could occur when the mirror driver was used
- Fixed some inconsistencies in the remote capabilities for the request elevation and the switch sides feature when connecting between different platforms
- Improved stability
Other Changes:
- The uninstaller (anydesk --remove) now accepts the --silent flag
AnyDesk 2.3.5
Fixed Bugs:
- Fixed image capture when connecting to outdated Windows 7 versions
- Fixed a bug in the license registration dialog
Other Changes:
- Long IDs are now displayed in groups of 3 digits
AnyDesk 2.3.4
Fixed Bugs
- Fixed image problems with 16-bit/fast rendering method.
- Fixed a few more high DPI issues.
- Fixed protocol compatibility with the Enterprise server.
- Fixed a crash that could occur when the system info tab was opened a second time.
- The system info tab could be opened before authentication, which resulted in a crash.
更新時間：2018-07-12
更新細節：
What's new in this version:
AnyDesk 4.2.0
New Features:
- Clipboard file transfer can now be disabled in the security settings
- The preview image can now be disabled in the privacy settings
- Most of the edits now support 'Ctrl'+'A'
- The session comment section can now be disabled where it appears
Fixed Bugs:
- Fixed a crash in D3D render mode
- Fixed a crash related to the 'Follow remote mouse cursor' feature
- Fixed a bug which made it possible to set up a password which did not meet the password safety requirements of AnyDesk for unattended access
- Fixed a race condition that could occur during requesting an alias
- When pasting a file after disabling the clipboard, the file copy operation got stuck
- The file copy operation is cancelled now when clipboard sync is disabled
- Fixed a rare bug which made AnyDesk crash immediately on startup
AnyDesk 4.1.3
- Made the session comment section multiline again
- The disclaimer did not show up again, when it was rejected the last time AnyDesk started and has not been changed in the meantime
- File transfer sessions no longer transmit hotkeys
- Fixed DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah of Fortinet's FortiGuard Labs for reporting this vulnerability to us
AnyDesk 4.1.2
- Fixed a bug in the security panel which made it impossible to set a password
- Fixed navigation to the drive selection view in file transfer mode
AnyDesk 4.1.0
Security Fixes:
- Prevented DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah from Fortinet for reporting this vulnerability to us
- Updated OpenSSL library to the latest version
Fixed Bugs:
- Fixed monitor reactivation when the monitor is in sleep mode and there is an incoming connection
- Fixed manual update link when auto-update is disabled
- Fixed a bug that prevented further connections to a computer, if a previous connection to that computer failed
- Fixed keyboard problems that occurred in conjunction with the right shift button
Other Changes:
- If a disclaimer has been set up, it will be shown on every change even if AnyDesk is installed already
- Most of the edits in AnyDesk now support context menu operations (paste, cut, clear, undo)
- AnyDesk will no longer follow the remote cursor when the local user changed the tab himself
- Improved address book update performance
AnyDesk 4.0.1
Fixed Bugs:
- SAS for Windows 8 and upwards was broken due to an extension handling Terminal Server
- On Terminal Server switching to advanced view may have resulted in a crash
AnyDesk 4.0.0
Extended support for Terminal Server:
- On connecting to a terminal server the user can choose now if to connect to the console session or a specific user. As an alternative a fully specified address can be used to directly connect to a a specific user
- Added file manager session type. The file manager can also be used during a normal session
- Session recording and playback. Enable this option under "privacy" in the options tab
- Optional auto-locking of the Windows session on AnyDesk session end
- Follow mouse cursor feature: When activated, the monitor selection follows the remote mouse cursor
- Auto-Update
- The user can now choose an alias
- Client Generator: Updates can now be disabled
AnyDesk 3.7.0
Fixed Bugs:
- Security change: fixed a bug where the permissions could be reset during the session
- In some cases, the AnyDesk main window was not rendered correctly in Windows 10 (showing transparent areas)
AnyDesk 3.6.3
- Fixed a crash when terminating AnyDesk using the tray icon while sessions were running
- Under rare conditions, connecting to Windows 10 showed no image/a black image
- Clipboard permission works again
- Disallowed to change the license key if settings are disabled
- Fixed SAS (Ctrl+Alt+Del) which did not work under some conditions on Windows Vista and upwards.On some Windows 10 systems, AnyDesk did not work when the monitor was rotated. On these systems, AnyDesk should now transmit the monitor content normally
- Fixed two rarely occuring crashes on address book close
AnyDesk 3.6.2
Fixed Bugs:
- Trying to add an address from the speed dial to an address book with a license of type free or lite
- opened a dialog instead of the address book
- Fixed screensaver settings on AnyDesk session close. This was broken due to a bug in Windows
- Fixed session comment dialog which could appear twice
Other Changes:
- Made license key removal more explicit and added option 'Change license key' to the main menu
AnyDesk 3.6.1
- Fixed Bugs
- Important security update, fixed dll injection vulnerability. Thanks to 0x09AL for reporting this
AnyDesk 3.6.0
- Transmission of system information can now be blocked. Older versions of AnyDesk will show useless information in this case
- Added a setting to disable the chat log
- Added a setting to choose the path to the chat log
- Added a setting to show the address book on startup
- Added a setting to allow the accept window to go to foreground on chat message received
AnyDesk 3.5.0
New Features:
- The remote restart feature now even works when AnyDesk is not installed
- Please note: You will need to request elevation from the remote user before using the restart feature in this case
- Custom AnyDesk: Text and title of ID and Connect Group (Main Window) can now be customized
- Custom AnyDesk: Before frontend startup a disclaimer can be shown now, which can be customized in logo, title, text, background color and the text on the accept and cancel buttons. It is shown only, if AnyDesk is not installed and the text contains non-whitespaces. All other settings are optional
- Custom AnyDesk: Added support for environment variables in paths
Fixed Bugs:
- In the D3D fullscreen menu the keyboard mode has always been set to 'translate'
- The invitation link in the main window has not been shown anymore after switching to advanced view and back
- Fixed crash on opening the chat log in the backend after session close
- Fixed crash when the session info panel was closed before the remote data was displayed
Fixed Bugs:
- Fixed custom logo layout in the main window's advanced view
- Fixed the connection panel's password edit showing clear text when disabled
AnyDesk 3.4.1
- Fixed dpi of comment session dialog
- Fixed that the comment session dialog can be shown although the licence is of type Lite
- Fixed a crash related to the comment session dialog
- Fixed that the character right of '9' on the standard hungarian keyboard layout has not been recognized before
AnyDesk 3.4.0
New Features:
- Sessions can now be commented on close. The comment can then be looked up on my.anydesk.com. If you don't want to comment, just clear the comment field. You will need a licence in order to use this new feature
- Address Book: AnyDesk now supports multiple address books. They can be added (up to a certain limit) and deleted. The number of available address books depends on your licence
- Status bars now also show the remote user name
Fixed Bugs:
- Fixed a crash on connecting due to monitor detection failure
- Address Book: Fixed tag validation on rename
- After elevation the backend user name in the chat was SYSTEM
Other Changes:
- Fixed and updated interfaces of installer, uninstaller, updater and global settings windows
AnyDesk 3.3.2
- Important security update. Please update if you have version 3.3.1
- Fixed a crash when using the drop to desktop feature
AnyDesk 3.3.1
- Fixed a crash on connecting due to monitor detection failure
- Fixed ACL denying access although the list is empty
AnyDesk 3.3.0
New Features:
- Address book: The name of an address can be set now on adding it to the address book
- Address book: Tags can now be renamed and removed from the tag tree view directly (on the left) Right click on a tag to choose
- Address book: Added commands 'Expand All' and 'Collapse All' to the tag tree view Right click on a tag or the tag tree view itself to choose
- Address Book: If a user action fails an error info dialog will be shown now
- When adding an address from the speed dial to the address book, a dialog will be shown now
- When connecting to a multi monitor system, AnyDesk now automatically switches to the primary monitor
Fixed Bugs:
- Fixed a crash after installing AnyDesk on Windows XP
- Address book: Fixed selected tags view layout (on top)
- Fixed service crash after installation due to invalid install parameters
- Fixed a crash on closing a session using OpenGL
- Using the mirror driver the backend detected more monitors than physically available, in case a software for virtual monitor creation is installed
Other Changes:
- Address Book: The list view now auto-sizes its columns
- Most text edits now select their content on getting keyboard focus
AnyDesk 3.2.5
- Fixed a crash after remote restart
- Fixed a bug in feature availability indicator in menu
- Fixed a bug in the address book that did not allow to add an item from the speed dial to the address book directly after startup
AnyDesk 3.2.4
Fixed Bugs:
- Fixed a bug which allowed two dialogs to be shown at the same time
- Fixed remote cursor rendering at the edges of the view
- Fixed a bug which let elevation fail when Windows denied access to the AnyDesk executable.
- Fixed a bug which led to the service shutting down automatically on elevating its backend, in case
- AnyDesk has not been installed on that side and the main window there has been closed before elevation
- Fixed the action menu showing elevation was available although the backend has been elevated already
- Fixed a race condition in the address book which made it unusable in some situations
- Fixed a bug in feature availability indicator in menu
Other changes:
- Added a hint in the elevation dialog that the remote user usually has to accept an elevation request
AnyDesk 3.2.3
Fixed Bugs:
- Fixed a regression which impaired AnyDesk's performance severely when connected to a Windows 8, 8.1 or 10 computer. Please update!
- Fixed a bug which caused the auto-reconnect feature after a remote restart to fail when the global settings dialog was opened previously
- Fixed a crash when using the "Retry" button in the remote desktop access denied dialog
- Improved stability
Other Changes:
- Improved feature availability indicator in menu
AnyDesk 3.2.2
Fixed Bugs:
- Fixed a bug which could lead to the service not starting timely after installing AnyDesk
- Fixed a crash which occured when closing the address book and terminating AnyDesk
- Fixed a crash by using ddraw as fallback for d3d when the graphics driver is not installed
- correctly and causes an exception during initialization
- Tags are validated now in the address book
Other Changes:
- Improved focus behaviour of controls
AnyDesk 3.2.1
Fixed Bugs:
- Fixed crash on adding an address to the address book
- Fixed elevation with credentials in case AnyDesk has been started from a user folder
- Fixed a crash which could occur when terminating a session with an open address book or multiple monitors
- Fixed character keyboard input which was not working for certain programs (GTK, QT) when connected from a mobile device
Other changes:
- Improved prompt shown in the password dialog when connecting
- Controls now show if focused
AnyDesk 3.2.0
New Features:
- The address book now remembers the last used view type (list/tiles)
- The address book now offers sorting options
- The address book now opens the tag dialog immediately after an address has been added
- The accept window will no longer auto-close tabs when chat messages have been sent/received
- Sessions can now be accepted via 'Enter' and dismissed via 'Esc'
- Added session status messages to chat
- The session time is now shown during a session and after disconnect
- The remote user client ID is now shown during a session (additionally to its alias)
- Your fingerprint can now be seen in the about panel
- The password for unattended access is now controlled via a dialog
You have to enter your password twice to check for misspellings
- Added language auto-selection (will select system language)
Fixed Bugs:
- Fixed WoA
- Fixed elevation with credentials
- The direct connection icon in the backend was greyed out although there was a direct connection
- The drop link feature dropped an invalid link (name instead of address)
- After disconnect it was no longer possible to mark/copy chat messages
- Fixed a crash that could occur on sending chat messages
- Some chat messages have not been recorded
- Fixed some minor bugs in the chat
- Fixed wrong message shown in the frontend on session request rejected
- Fixed some bugs with keyboard focus
- Fixed a bug with auto-selection of tabs in accept window
- Sometimes the address book did not show online states on opening it the first time
- Fixed some bugs with tag selection in the address book
- Fixed a crash that could occur when closing the main window with the address book opened
- Fixed filtering of recent connections
- Fixed recent connection being removed from favorites on name change
- In some cases a wrong text has been shown on connection request
- Fixed various minor bugs
Other Changes:
- The accept/dismiss buttons are now disabled for a short time when entering a new session state to prevent accidentally clicking them
- The accept window is now only always on top when there are not yet accepted sessions left. And it will be back on top on session request
- The accept window will now auto-select an incoming session tab in some situations
- Added bottom right resize corner
- Fixed some dpi issues
- Added some localization
AnyDesk 3.1.1
Fixed Bugs:
- Improved stability
- Fixed some bugs in the chat
- Other changes
- Signed the exe and msi files with two certificates.
AnyDesk 3.1.0
New Features:
- Reworked the chat in the client
- Added an option to disable remote restart in the security settings
Fixed Bugs:
- Fixed a bug in DeskRT which caused it to be slow on certain monitor resolutions indivisible by 16 (for example 1366x768). Responsiveness should be much higher now in these cases
- In some cases, the view mode settings for remote computers were not restored correctly for future sessions
- Fixed a crash which could occur when connecting to AnyDesk while it was terminating
- Fixed a bug which could lead to the system info feature not being available
- Improved stability
- Minor user interface layout fixes
AnyDesk 3.0.0
- Added edge scrolling feature for the original view mode: use this when the remote image is much larger than the local monitor
AnyDesk 2.6.1
New Features:
- Implemented customisation support for my.anydesk.com for macOS
Fixed Bugs:
- Enable/disable audio works now
- Receive connection window constraints were fixed
AnyDesk 2.6.0
New Features:
- Implemented Access Control List feature. This makes it possible to restrict access to machines based on the alias. Wildcards are supported, for example "*@company", "pc-?@ad" and so on. Restrictions based solely on the numerical id are also supported. You can find the feature in the Security Panel of the AnyDesk settings.
Fixed Bugs:
- Fixed a bug where the file transfer and probably the text clipboard did not work on Windows 7 when UAC was disabled and AnyDesk was not installed.
- Fixed a regression which could lead to being unable to control the remote machine after activating a privileged window in the task bar when AnyDesk was not installed.
- Fixed a bug which could cause severe image lag after using the "switch sides" or "request elevation" features or doing a fast user switch of a remote controlled Windows session.
Other Changes:
- The remote users input is now temporarily disabled when typing on the local keyboard. In previous versions, only moving the mouse disabled remote input.
AnyDesk 2.5.0
New Features:
- Implemented remote restart feature: The connection will automatically be restored once the remote machine finished restarting
- Added a confirmation dialog for the switch sides feature
- The coloured user pointer can now be disabled in the security settings
Fixed Bugs:
- Fixed a bug which could lead to a wrong aspect ratio image or no image at all when connecting to a multi monitor system until the first resize of the session window
- Fixed image corruption which could occur when the mirror driver was used
- Fixed some inconsistencies in the remote capabilities for the request elevation and the switch sides feature when connecting between different platforms
- Improved stability
Other Changes:
- The uninstaller (anydesk --remove) now accepts the --silent flag
AnyDesk 2.3.5
Fixed Bugs:
- Fixed image capture when connecting to outdated Windows 7 versions
- Fixed a bug in the license registration dialog
Other Changes:
- Long IDs are now displayed in groups of 3 digits
AnyDesk 2.3.4
Fixed Bugs
- Fixed image problems with 16-bit/fast rendering method.
- Fixed a few more high DPI issues.
- Fixed protocol compatibility with the Enterprise server.
- Fixed a crash that could occur when the system info tab was opened a second time.
- The system info tab could be opened before authentication, which resulted in a crash.
更新時間：2018-06-13
更新細節：
What's new in this version:
AnyDesk 4.1.3
- Made the session comment section multiline again
- The disclaimer did not show up again, when it was rejected the last time AnyDesk started and has not been changed in the meantime
- File transfer sessions no longer transmit hotkeys
- Fixed DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah of Fortinet's FortiGuard Labs for reporting this vulnerability to us
AnyDesk 4.1.2
- Fixed a bug in the security panel which made it impossible to set a password
- Fixed navigation to the drive selection view in file transfer mode
AnyDesk 4.1.0
Security Fixes:
- Prevented DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah from Fortinet for reporting this vulnerability to us
- Updated OpenSSL library to the latest version
Fixed Bugs:
- Fixed monitor reactivation when the monitor is in sleep mode and there is an incoming connection
- Fixed manual update link when auto-update is disabled
- Fixed a bug that prevented further connections to a computer, if a previous connection to that computer failed
- Fixed keyboard problems that occurred in conjunction with the right shift button
Other Changes:
- If a disclaimer has been set up, it will be shown on every change even if AnyDesk is installed already
- Most of the edits in AnyDesk now support context menu operations (paste, cut, clear, undo)
- AnyDesk will no longer follow the remote cursor when the local user changed the tab himself
- Improved address book update performance
AnyDesk 4.0.1
Fixed Bugs:
- SAS for Windows 8 and upwards was broken due to an extension handling Terminal Server
- On Terminal Server switching to advanced view may have resulted in a crash
AnyDesk 4.0.0
Extended support for Terminal Server:
- On connecting to a terminal server the user can choose now if to connect to the console session or a specific user. As an alternative a fully specified address can be used to directly connect to a a specific user
- Added file manager session type. The file manager can also be used during a normal session
- Session recording and playback. Enable this option under "privacy" in the options tab
- Optional auto-locking of the Windows session on AnyDesk session end
- Follow mouse cursor feature: When activated, the monitor selection follows the remote mouse cursor
- Auto-Update
- The user can now choose an alias
- Client Generator: Updates can now be disabled
AnyDesk 3.7.0
Fixed Bugs:
- Security change: fixed a bug where the permissions could be reset during the session
- In some cases, the AnyDesk main window was not rendered correctly in Windows 10 (showing transparent areas)
AnyDesk 3.6.3
- Fixed a crash when terminating AnyDesk using the tray icon while sessions were running
- Under rare conditions, connecting to Windows 10 showed no image/a black image
- Clipboard permission works again
- Disallowed to change the license key if settings are disabled
- Fixed SAS (Ctrl+Alt+Del) which did not work under some conditions on Windows Vista and upwards.On some Windows 10 systems, AnyDesk did not work when the monitor was rotated. On these systems, AnyDesk should now transmit the monitor content normally
- Fixed two rarely occuring crashes on address book close
AnyDesk 3.6.2
Fixed Bugs:
- Trying to add an address from the speed dial to an address book with a license of type free or lite
- opened a dialog instead of the address book
- Fixed screensaver settings on AnyDesk session close. This was broken due to a bug in Windows
- Fixed session comment dialog which could appear twice
Other Changes:
- Made license key removal more explicit and added option 'Change license key' to the main menu
AnyDesk 3.6.1
- Fixed Bugs
- Important security update, fixed dll injection vulnerability. Thanks to 0x09AL for reporting this
AnyDesk 3.6.0
- Transmission of system information can now be blocked. Older versions of AnyDesk will show useless information in this case
- Added a setting to disable the chat log
- Added a setting to choose the path to the chat log
- Added a setting to show the address book on startup
- Added a setting to allow the accept window to go to foreground on chat message received
AnyDesk 3.5.0
New Features:
- The remote restart feature now even works when AnyDesk is not installed
- Please note: You will need to request elevation from the remote user before using the restart feature in this case
- Custom AnyDesk: Text and title of ID and Connect Group (Main Window) can now be customized
- Custom AnyDesk: Before frontend startup a disclaimer can be shown now, which can be customized in logo, title, text, background color and the text on the accept and cancel buttons. It is shown only, if AnyDesk is not installed and the text contains non-whitespaces. All other settings are optional
- Custom AnyDesk: Added support for environment variables in paths
Fixed Bugs:
- In the D3D fullscreen menu the keyboard mode has always been set to 'translate'
- The invitation link in the main window has not been shown anymore after switching to advanced view and back
- Fixed crash on opening the chat log in the backend after session close
- Fixed crash when the session info panel was closed before the remote data was displayed
Fixed Bugs:
- Fixed custom logo layout in the main window's advanced view
- Fixed the connection panel's password edit showing clear text when disabled
AnyDesk 3.4.1
- Fixed dpi of comment session dialog
- Fixed that the comment session dialog can be shown although the licence is of type Lite
- Fixed a crash related to the comment session dialog
- Fixed that the character right of '9' on the standard hungarian keyboard layout has not been recognized before
AnyDesk 3.4.0
New Features:
- Sessions can now be commented on close. The comment can then be looked up on my.anydesk.com. If you don't want to comment, just clear the comment field. You will need a licence in order to use this new feature
- Address Book: AnyDesk now supports multiple address books. They can be added (up to a certain limit) and deleted. The number of available address books depends on your licence
- Status bars now also show the remote user name
Fixed Bugs:
- Fixed a crash on connecting due to monitor detection failure
- Address Book: Fixed tag validation on rename
- After elevation the backend user name in the chat was SYSTEM
Other Changes:
- Fixed and updated interfaces of installer, uninstaller, updater and global settings windows
AnyDesk 3.3.2
- Important security update. Please update if you have version 3.3.1
- Fixed a crash when using the drop to desktop feature
AnyDesk 3.3.1
- Fixed a crash on connecting due to monitor detection failure
- Fixed ACL denying access although the list is empty
AnyDesk 3.3.0
New Features:
- Address book: The name of an address can be set now on adding it to the address book
- Address book: Tags can now be renamed and removed from the tag tree view directly (on the left) Right click on a tag to choose
- Address book: Added commands 'Expand All' and 'Collapse All' to the tag tree view Right click on a tag or the tag tree view itself to choose
- Address Book: If a user action fails an error info dialog will be shown now
- When adding an address from the speed dial to the address book, a dialog will be shown now
- When connecting to a multi monitor system, AnyDesk now automatically switches to the primary monitor
Fixed Bugs:
- Fixed a crash after installing AnyDesk on Windows XP
- Address book: Fixed selected tags view layout (on top)
- Fixed service crash after installation due to invalid install parameters
- Fixed a crash on closing a session using OpenGL
- Using the mirror driver the backend detected more monitors than physically available, in case a software for virtual monitor creation is installed
Other Changes:
- Address Book: The list view now auto-sizes its columns
- Most text edits now select their content on getting keyboard focus
AnyDesk 3.2.5
- Fixed a crash after remote restart
- Fixed a bug in feature availability indicator in menu
- Fixed a bug in the address book that did not allow to add an item from the speed dial to the address book directly after startup
AnyDesk 3.2.4
Fixed Bugs:
- Fixed a bug which allowed two dialogs to be shown at the same time
- Fixed remote cursor rendering at the edges of the view
- Fixed a bug which let elevation fail when Windows denied access to the AnyDesk executable.
- Fixed a bug which led to the service shutting down automatically on elevating its backend, in case
- AnyDesk has not been installed on that side and the main window there has been closed before elevation
- Fixed the action menu showing elevation was available although the backend has been elevated already
- Fixed a race condition in the address book which made it unusable in some situations
- Fixed a bug in feature availability indicator in menu
Other changes:
- Added a hint in the elevation dialog that the remote user usually has to accept an elevation request
AnyDesk 3.2.3
Fixed Bugs:
- Fixed a regression which impaired AnyDesk's performance severely when connected to a Windows 8, 8.1 or 10 computer. Please update!
- Fixed a bug which caused the auto-reconnect feature after a remote restart to fail when the global settings dialog was opened previously
- Fixed a crash when using the "Retry" button in the remote desktop access denied dialog
- Improved stability
Other Changes:
- Improved feature availability indicator in menu
AnyDesk 3.2.2
Fixed Bugs:
- Fixed a bug which could lead to the service not starting timely after installing AnyDesk
- Fixed a crash which occured when closing the address book and terminating AnyDesk
- Fixed a crash by using ddraw as fallback for d3d when the graphics driver is not installed
- correctly and causes an exception during initialization
- Tags are validated now in the address book
Other Changes:
- Improved focus behaviour of controls
AnyDesk 3.2.1
Fixed Bugs:
- Fixed crash on adding an address to the address book
- Fixed elevation with credentials in case AnyDesk has been started from a user folder
- Fixed a crash which could occur when terminating a session with an open address book or multiple monitors
- Fixed character keyboard input which was not working for certain programs (GTK, QT) when connected from a mobile device
Other changes:
- Improved prompt shown in the password dialog when connecting
- Controls now show if focused
AnyDesk 3.2.0
New Features:
- The address book now remembers the last used view type (list/tiles)
- The address book now offers sorting options
- The address book now opens the tag dialog immediately after an address has been added
- The accept window will no longer auto-close tabs when chat messages have been sent/received
- Sessions can now be accepted via 'Enter' and dismissed via 'Esc'
- Added session status messages to chat
- The session time is now shown during a session and after disconnect
- The remote user client ID is now shown during a session (additionally to its alias)
- Your fingerprint can now be seen in the about panel
- The password for unattended access is now controlled via a dialog
You have to enter your password twice to check for misspellings
- Added language auto-selection (will select system language)
Fixed Bugs:
- Fixed WoA
- Fixed elevation with credentials
- The direct connection icon in the backend was greyed out although there was a direct connection
- The drop link feature dropped an invalid link (name instead of address)
- After disconnect it was no longer possible to mark/copy chat messages
- Fixed a crash that could occur on sending chat messages
- Some chat messages have not been recorded
- Fixed some minor bugs in the chat
- Fixed wrong message shown in the frontend on session request rejected
- Fixed some bugs with keyboard focus
- Fixed a bug with auto-selection of tabs in accept window
- Sometimes the address book did not show online states on opening it the first time
- Fixed some bugs with tag selection in the address book
- Fixed a crash that could occur when closing the main window with the address book opened
- Fixed filtering of recent connections
- Fixed recent connection being removed from favorites on name change
- In some cases a wrong text has been shown on connection request
- Fixed various minor bugs
Other Changes:
- The accept/dismiss buttons are now disabled for a short time when entering a new session state to prevent accidentally clicking them
- The accept window is now only always on top when there are not yet accepted sessions left. And it will be back on top on session request
- The accept window will now auto-select an incoming session tab in some situations
- Added bottom right resize corner
- Fixed some dpi issues
- Added some localization
AnyDesk 3.1.1
Fixed Bugs:
- Improved stability
- Fixed some bugs in the chat
- Other changes
- Signed the exe and msi files with two certificates.
AnyDesk 3.1.0
New Features:
- Reworked the chat in the client
- Added an option to disable remote restart in the security settings
Fixed Bugs:
- Fixed a bug in DeskRT which caused it to be slow on certain monitor resolutions indivisible by 16 (for example 1366x768). Responsiveness should be much higher now in these cases
- In some cases, the view mode settings for remote computers were not restored correctly for future sessions
- Fixed a crash which could occur when connecting to AnyDesk while it was terminating
- Fixed a bug which could lead to the system info feature not being available
- Improved stability
- Minor user interface layout fixes
AnyDesk 3.0.0
- Added edge scrolling feature for the original view mode: use this when the remote image is much larger than the local monitor
AnyDesk 2.6.1
New Features:
- Implemented customisation support for my.anydesk.com for macOS
Fixed Bugs:
- Enable/disable audio works now
- Receive connection window constraints were fixed
AnyDesk 2.6.0
New Features:
- Implemented Access Control List feature. This makes it possible to restrict access to machines based on the alias. Wildcards are supported, for example "*@company", "pc-?@ad" and so on. Restrictions based solely on the numerical id are also supported. You can find the feature in the Security Panel of the AnyDesk settings.
Fixed Bugs:
- Fixed a bug where the file transfer and probably the text clipboard did not work on Windows 7 when UAC was disabled and AnyDesk was not installed.
- Fixed a regression which could lead to being unable to control the remote machine after activating a privileged window in the task bar when AnyDesk was not installed.
- Fixed a bug which could cause severe image lag after using the "switch sides" or "request elevation" features or doing a fast user switch of a remote controlled Windows session.
Other Changes:
- The remote users input is now temporarily disabled when typing on the local keyboard. In previous versions, only moving the mouse disabled remote input.
AnyDesk 2.5.0
New Features:
- Implemented remote restart feature: The connection will automatically be restored once the remote machine finished restarting
- Added a confirmation dialog for the switch sides feature
- The coloured user pointer can now be disabled in the security settings
Fixed Bugs:
- Fixed a bug which could lead to a wrong aspect ratio image or no image at all when connecting to a multi monitor system until the first resize of the session window
- Fixed image corruption which could occur when the mirror driver was used
- Fixed some inconsistencies in the remote capabilities for the request elevation and the switch sides feature when connecting between different platforms
- Improved stability
Other Changes:
- The uninstaller (anydesk --remove) now accepts the --silent flag
AnyDesk 2.3.5
Fixed Bugs:
- Fixed image capture when connecting to outdated Windows 7 versions
- Fixed a bug in the license registration dialog
Other Changes:
- Long IDs are now displayed in groups of 3 digits
AnyDesk 2.3.4
Fixed Bugs
- Fixed image problems with 16-bit/fast rendering method.
- Fixed a few more high DPI issues.
- Fixed protocol compatibility with the Enterprise server.
- Fixed a crash that could occur when the system info tab was opened a second time.
- The system info tab could be opened before authentication, which resulted in a crash.
更新時間：2018-05-29
更新細節：
What's new in this version:
AnyDesk 4.1.2
- Fixed a bug in the security panel which made it impossible to set a password
- Fixed navigation to the drive selection view in file transfer mode
AnyDesk 4.1.0
Security Fixes:
- Prevented DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah from Fortinet for reporting this vulnerability to us
- Updated OpenSSL library to the latest version
Fixed Bugs:
- Fixed monitor reactivation when the monitor is in sleep mode and there is an incoming connection
- Fixed manual update link when auto-update is disabled
- Fixed a bug that prevented further connections to a computer, if a previous connection to that computer failed
- Fixed keyboard problems that occurred in conjunction with the right shift button
Other Changes:
- If a disclaimer has been set up, it will be shown on every change even if AnyDesk is installed already
- Most of the edits in AnyDesk now support context menu operations (paste, cut, clear, undo)
- AnyDesk will no longer follow the remote cursor when the local user changed the tab himself
- Improved address book update performance
AnyDesk 4.0.1
Fixed Bugs:
- SAS for Windows 8 and upwards was broken due to an extension handling Terminal Server
- On Terminal Server switching to advanced view may have resulted in a crash
AnyDesk 4.0.0
Extended support for Terminal Server:
- On connecting to a terminal server the user can choose now if to connect to the console session or a specific user. As an alternative a fully specified address can be used to directly connect to a a specific user
- Added file manager session type. The file manager can also be used during a normal session
- Session recording and playback. Enable this option under "privacy" in the options tab
- Optional auto-locking of the Windows session on AnyDesk session end
- Follow mouse cursor feature: When activated, the monitor selection follows the remote mouse cursor
- Auto-Update
- The user can now choose an alias
- Client Generator: Updates can now be disabled
AnyDesk 3.7.0
Fixed Bugs:
- Security change: fixed a bug where the permissions could be reset during the session
- In some cases, the AnyDesk main window was not rendered correctly in Windows 10 (showing transparent areas)
AnyDesk 3.6.3
- Fixed a crash when terminating AnyDesk using the tray icon while sessions were running
- Under rare conditions, connecting to Windows 10 showed no image/a black image
- Clipboard permission works again
- Disallowed to change the license key if settings are disabled
- Fixed SAS (Ctrl+Alt+Del) which did not work under some conditions on Windows Vista and upwards.On some Windows 10 systems, AnyDesk did not work when the monitor was rotated. On these systems, AnyDesk should now transmit the monitor content normally
- Fixed two rarely occuring crashes on address book close
AnyDesk 3.6.2
Fixed Bugs:
- Trying to add an address from the speed dial to an address book with a license of type free or lite
- opened a dialog instead of the address book
- Fixed screensaver settings on AnyDesk session close. This was broken due to a bug in Windows
- Fixed session comment dialog which could appear twice
Other Changes:
- Made license key removal more explicit and added option 'Change license key' to the main menu
AnyDesk 3.6.1
- Fixed Bugs
- Important security update, fixed dll injection vulnerability. Thanks to 0x09AL for reporting this
AnyDesk 3.6.0
- Transmission of system information can now be blocked. Older versions of AnyDesk will show useless information in this case
- Added a setting to disable the chat log
- Added a setting to choose the path to the chat log
- Added a setting to show the address book on startup
- Added a setting to allow the accept window to go to foreground on chat message received
AnyDesk 3.5.0
New Features:
- The remote restart feature now even works when AnyDesk is not installed
- Please note: You will need to request elevation from the remote user before using the restart feature in this case
- Custom AnyDesk: Text and title of ID and Connect Group (Main Window) can now be customized
- Custom AnyDesk: Before frontend startup a disclaimer can be shown now, which can be customized in logo, title, text, background color and the text on the accept and cancel buttons. It is shown only, if AnyDesk is not installed and the text contains non-whitespaces. All other settings are optional
- Custom AnyDesk: Added support for environment variables in paths
Fixed Bugs:
- In the D3D fullscreen menu the keyboard mode has always been set to 'translate'
- The invitation link in the main window has not been shown anymore after switching to advanced view and back
- Fixed crash on opening the chat log in the backend after session close
- Fixed crash when the session info panel was closed before the remote data was displayed
Fixed Bugs:
- Fixed custom logo layout in the main window's advanced view
- Fixed the connection panel's password edit showing clear text when disabled
AnyDesk 3.4.1
- Fixed dpi of comment session dialog
- Fixed that the comment session dialog can be shown although the licence is of type Lite
- Fixed a crash related to the comment session dialog
- Fixed that the character right of '9' on the standard hungarian keyboard layout has not been recognized before
AnyDesk 3.4.0
New Features:
- Sessions can now be commented on close. The comment can then be looked up on my.anydesk.com. If you don't want to comment, just clear the comment field. You will need a licence in order to use this new feature
- Address Book: AnyDesk now supports multiple address books. They can be added (up to a certain limit) and deleted. The number of available address books depends on your licence
- Status bars now also show the remote user name
Fixed Bugs:
- Fixed a crash on connecting due to monitor detection failure
- Address Book: Fixed tag validation on rename
- After elevation the backend user name in the chat was SYSTEM
Other Changes:
- Fixed and updated interfaces of installer, uninstaller, updater and global settings windows
AnyDesk 3.3.2
- Important security update. Please update if you have version 3.3.1
- Fixed a crash when using the drop to desktop feature
AnyDesk 3.3.1
- Fixed a crash on connecting due to monitor detection failure
- Fixed ACL denying access although the list is empty
AnyDesk 3.3.0
New Features:
- Address book: The name of an address can be set now on adding it to the address book
- Address book: Tags can now be renamed and removed from the tag tree view directly (on the left) Right click on a tag to choose
- Address book: Added commands 'Expand All' and 'Collapse All' to the tag tree view Right click on a tag or the tag tree view itself to choose
- Address Book: If a user action fails an error info dialog will be shown now
- When adding an address from the speed dial to the address book, a dialog will be shown now
- When connecting to a multi monitor system, AnyDesk now automatically switches to the primary monitor
Fixed Bugs:
- Fixed a crash after installing AnyDesk on Windows XP
- Address book: Fixed selected tags view layout (on top)
- Fixed service crash after installation due to invalid install parameters
- Fixed a crash on closing a session using OpenGL
- Using the mirror driver the backend detected more monitors than physically available, in case a software for virtual monitor creation is installed
Other Changes:
- Address Book: The list view now auto-sizes its columns
- Most text edits now select their content on getting keyboard focus
AnyDesk 3.2.5
- Fixed a crash after remote restart
- Fixed a bug in feature availability indicator in menu
- Fixed a bug in the address book that did not allow to add an item from the speed dial to the address book directly after startup
AnyDesk 3.2.4
Fixed Bugs:
- Fixed a bug which allowed two dialogs to be shown at the same time
- Fixed remote cursor rendering at the edges of the view
- Fixed a bug which let elevation fail when Windows denied access to the AnyDesk executable.
- Fixed a bug which led to the service shutting down automatically on elevating its backend, in case
- AnyDesk has not been installed on that side and the main window there has been closed before elevation
- Fixed the action menu showing elevation was available although the backend has been elevated already
- Fixed a race condition in the address book which made it unusable in some situations
- Fixed a bug in feature availability indicator in menu
Other changes:
- Added a hint in the elevation dialog that the remote user usually has to accept an elevation request
AnyDesk 3.2.3
Fixed Bugs:
- Fixed a regression which impaired AnyDesk's performance severely when connected to a Windows 8, 8.1 or 10 computer. Please update!
- Fixed a bug which caused the auto-reconnect feature after a remote restart to fail when the global settings dialog was opened previously
- Fixed a crash when using the "Retry" button in the remote desktop access denied dialog
- Improved stability
Other Changes:
- Improved feature availability indicator in menu
AnyDesk 3.2.2
Fixed Bugs:
- Fixed a bug which could lead to the service not starting timely after installing AnyDesk
- Fixed a crash which occured when closing the address book and terminating AnyDesk
- Fixed a crash by using ddraw as fallback for d3d when the graphics driver is not installed
- correctly and causes an exception during initialization
- Tags are validated now in the address book
Other Changes:
- Improved focus behaviour of controls
AnyDesk 3.2.1
Fixed Bugs:
- Fixed crash on adding an address to the address book
- Fixed elevation with credentials in case AnyDesk has been started from a user folder
- Fixed a crash which could occur when terminating a session with an open address book or multiple monitors
- Fixed character keyboard input which was not working for certain programs (GTK, QT) when connected from a mobile device
Other changes:
- Improved prompt shown in the password dialog when connecting
- Controls now show if focused
AnyDesk 3.2.0
New Features:
- The address book now remembers the last used view type (list/tiles)
- The address book now offers sorting options
- The address book now opens the tag dialog immediately after an address has been added
- The accept window will no longer auto-close tabs when chat messages have been sent/received
- Sessions can now be accepted via 'Enter' and dismissed via 'Esc'
- Added session status messages to chat
- The session time is now shown during a session and after disconnect
- The remote user client ID is now shown during a session (additionally to its alias)
- Your fingerprint can now be seen in the about panel
- The password for unattended access is now controlled via a dialog
You have to enter your password twice to check for misspellings
- Added language auto-selection (will select system language)
Fixed Bugs:
- Fixed WoA
- Fixed elevation with credentials
- The direct connection icon in the backend was greyed out although there was a direct connection
- The drop link feature dropped an invalid link (name instead of address)
- After disconnect it was no longer possible to mark/copy chat messages
- Fixed a crash that could occur on sending chat messages
- Some chat messages have not been recorded
- Fixed some minor bugs in the chat
- Fixed wrong message shown in the frontend on session request rejected
- Fixed some bugs with keyboard focus
- Fixed a bug with auto-selection of tabs in accept window
- Sometimes the address book did not show online states on opening it the first time
- Fixed some bugs with tag selection in the address book
- Fixed a crash that could occur when closing the main window with the address book opened
- Fixed filtering of recent connections
- Fixed recent connection being removed from favorites on name change
- In some cases a wrong text has been shown on connection request
- Fixed various minor bugs
Other Changes:
- The accept/dismiss buttons are now disabled for a short time when entering a new session state to prevent accidentally clicking them
- The accept window is now only always on top when there are not yet accepted sessions left. And it will be back on top on session request
- The accept window will now auto-select an incoming session tab in some situations
- Added bottom right resize corner
- Fixed some dpi issues
- Added some localization
AnyDesk 3.1.1
Fixed Bugs:
- Improved stability
- Fixed some bugs in the chat
- Other changes
- Signed the exe and msi files with two certificates.
AnyDesk 3.1.0
New Features:
- Reworked the chat in the client
- Added an option to disable remote restart in the security settings
Fixed Bugs:
- Fixed a bug in DeskRT which caused it to be slow on certain monitor resolutions indivisible by 16 (for example 1366x768). Responsiveness should be much higher now in these cases
- In some cases, the view mode settings for remote computers were not restored correctly for future sessions
- Fixed a crash which could occur when connecting to AnyDesk while it was terminating
- Fixed a bug which could lead to the system info feature not being available
- Improved stability
- Minor user interface layout fixes
AnyDesk 3.0.0
- Added edge scrolling feature for the original view mode: use this when the remote image is much larger than the local monitor
AnyDesk 2.6.1
New Features:
- Implemented customisation support for my.anydesk.com for macOS
Fixed Bugs:
- Enable/disable audio works now
- Receive connection window constraints were fixed
AnyDesk 2.6.0
New Features:
- Implemented Access Control List feature. This makes it possible to restrict access to machines based on the alias. Wildcards are supported, for example "*@company", "pc-?@ad" and so on. Restrictions based solely on the numerical id are also supported. You can find the feature in the Security Panel of the AnyDesk settings.
Fixed Bugs:
- Fixed a bug where the file transfer and probably the text clipboard did not work on Windows 7 when UAC was disabled and AnyDesk was not installed.
- Fixed a regression which could lead to being unable to control the remote machine after activating a privileged window in the task bar when AnyDesk was not installed.
- Fixed a bug which could cause severe image lag after using the "switch sides" or "request elevation" features or doing a fast user switch of a remote controlled Windows session.
Other Changes:
- The remote users input is now temporarily disabled when typing on the local keyboard. In previous versions, only moving the mouse disabled remote input.
AnyDesk 2.5.0
New Features:
- Implemented remote restart feature: The connection will automatically be restored once the remote machine finished restarting
- Added a confirmation dialog for the switch sides feature
- The coloured user pointer can now be disabled in the security settings
Fixed Bugs:
- Fixed a bug which could lead to a wrong aspect ratio image or no image at all when connecting to a multi monitor system until the first resize of the session window
- Fixed image corruption which could occur when the mirror driver was used
- Fixed some inconsistencies in the remote capabilities for the request elevation and the switch sides feature when connecting between different platforms
- Improved stability
Other Changes:
- The uninstaller (anydesk --remove) now accepts the --silent flag
AnyDesk 2.3.5
Fixed Bugs:
- Fixed image capture when connecting to outdated Windows 7 versions
- Fixed a bug in the license registration dialog
Other Changes:
- Long IDs are now displayed in groups of 3 digits
AnyDesk 2.3.4
Fixed Bugs
- Fixed image problems with 16-bit/fast rendering method.
- Fixed a few more high DPI issues.
- Fixed protocol compatibility with the Enterprise server.
- Fixed a crash that could occur when the system info tab was opened a second time.
- The system info tab could be opened before authentication, which resulted in a crash.
更新時間：2018-05-17
更新細節：
What's new in this version:
FlashBoot 3.1h
- Samsung NVMe controller driver was updated from version 2.2.0.1703 to 3.0.0.1802, and now it supports new device PCIVEN_144D&DEV_A808
FlashBoot 3.1g
- Fixed "too many USB logical disks after soft replug" problem which occured for full-featured Windows 8/8.1/10 installation and cloning scenarios in UEFI mode, if target USB storage device was USB HDD, and if host OS was Windows 10 1804
FlashBoot 3.1f
- Added handling of specific condition when pre-existing EFI System Partition or Microsoft Reserved Partition could prevent reformatting of fixed USB mass storage device with GPT partition layout. This applies both to FlashBoot itself and self-extracting EXE files generated by FlashBoot
FlashBoot 3.1e
The following prepackaged drivers were added:
- Intel(R) USB 3.0 Host Controller Adaptation Driver for Windows 8/8.1
- ASMedia USB 3.1 Extensible Host Controller Driver for Windows 7 and above
- Etron USB 3.0 Extensible Host Controller Driver for Windows 7 and above
- Fresco Logic xHCI (USB3) Device Driver for Windows 7 and above
- Texas Instruments USB 3.0 Host Controller Driver for Windows Vista and above
- Intel(R) 8 Series Chipset Family SATA AHCI Controller Driver for Windows 7 and above
- Intel(R) 9 Series Chipset Family SATA AHCI Controller Driver for Windows 7 and above
- Intel(R) ESB2 SATA AHCI/RAID Controller Driver for Windows 7
- Intel(R) ICH8R/DH/DO SATA AHCI Controller Driver for Windows 7
- Intel(R) ICH8M-E/M SATA AHCI Controller Driver for Windows 7
- Intel(R) ICH9R/DO/DH SATA AHCI Controller Driver for Windows 7
FlashBoot 3.1d
- All builtin links to prime-expert.com and subdomains were changed from http to https
FlashBoot 3.1c
- For Windows Setup Media conversion scenarios (from ISO to USB), if size of install.wim/install.esd is larger than or equal to 4 Gb, and target filesystem is not NTFS, then this file is recompressed in solid mode. This is strictly necessary for post-November 2017 builds of Windows 10, and this is on par with MS Media Creation Tool
FlashBoot 3.1b
- Starting from this version, FlashBoot driver integration feature supports Windows Setup images with mixed bitness (32-bit/64-bit)
FlashBoot 3.1a
- Starting from this version, Windows Recovery is installed to the target USB storage device along with mainline Windows in all ToGo scenarios (installing full-featured Windows 8/8.1/10, creating bootable clone of Windows 8.1/10). Windows Recovery takes part in major updates of Windows 10 (such as Fall Creators Update), so functional Windows Recovery is essential for this OS to survive major updates in ToGo mode
- Driver slipstreaming feature for Windows Vista/7/8/8.1/10 now updates Windows Recovery Image (in addition to Windows Image and Windows Setup Image, as in previous versions), so Windows Recovery will be able to detect USB 3.0 peripheral HID and Windows Partition on NVMe/RAID storage devices. One more reason to slipstream drivers via FlashBoot Pro instead of sideloading them in Windows Setup
Prepackaged driver for Intel USB 3.0 Host Controller was updated, now it supports the following additional devices:
- PCIVEN_8086&DEV_15B5
- PCIVEN_8086&DEV_15B6
- PCIVEN_8086&DEV_15C1
- PCIVEN_8086&DEV_15D4
- PCIVEN_8086&DEV_15DB
- PCIVEN_8086&DEV_A1AF
- PCIVEN_8086&DEV_A22F
- PCIVEN_8086&DEV_A2AF
- Backward navigation in wizard for cloning scenario was fixed (used to skip file/folder exclusion page)
- Grey background used to flicker occasionally on the splash screen, that's fixed now
FlashBoot 3.1
- Change log not available for this version
FlashBoot 3.0h
New method of UEFI bootloader installation for the following scenarios:
- PrepareWinVista78or10InstallerOnUSB_FromDVD_UefiMode
- PrepareWinVista78or10InstallerOnUSB_FromESD_UefiMode
- InstallWindows8or10ToUSB_FromDVD_UefiMode
FlashBoot 3.0g
Fixed the following error which occured for all scenarios with CHS geometry translation (DOS, Windows XP, BartPE) starting from FlashBoot version 3.0:
- Boot from USB disk failed, status
- Press Ctrl+Alt+Del to reboot
FlashBoot 3.0f
- Fixed regression for Windows 8 which was introduced in FlashBoot 3.0d. Windows 8.1 and Windows 10 were not affected
FlashBoot 3.0e
- Added AMD USB 3.1 host controller driver to FlashBoot builtin drivers
FlashBoot 3.0d
- Change log not available for this version
FlashBoot 3.0c
- Fixed a regression in VFS code which was introduced in version 3.0b
FlashBoot 3.0b
- Starting from this version, it's possible to create self-extracting archives specifying root directory of some volume as a source directory
FlashBoot 3.0a
- Raw image writing: fixed stall of progress indication during zero padding operation
- FlashBoot size was reduced due to better compression of screenshots in the help file
FlashBoot 3.0
- New features: driver integration and creation of self-extracting USB formatter EXE files
- Dropped a lot of obsolete features related to floppies, CDs, DOS, Windows 9x and 10-year old versions of Linux
- Simpler licensing model: Free and Pro editions, without time/use limitations
- Free edition is useful on its own and roughly corresponds to other free tools on the market
- Most of features from version 2.x were moved to Free edition
- Simpler main menu, clearly separated "OS installer on USB" from "full OS on USB"
- Improvements in command line version: flexible arguments, faster start time
更新時間：2018-05-17
更新細節：
What's new in this version:
AnyDesk 4.1.0
Security Fixes:
- Prevented DLL preloading vulnerability in Windows 7 SP1
- Thanks go to Kushal Arvind Shah from Fortinet for reporting this vulnerability to us
- Updated OpenSSL library to the latest version
Fixed Bugs:
- Fixed monitor reactivation when the monitor is in sleep mode and there is an incoming connection
- Fixed manual update link when auto-update is disabled
- Fixed a bug that prevented further connections to a computer, if a previous connection to that computer failed
- Fixed keyboard problems that occurred in conjunction with the right shift button
Other Changes:
- If a disclaimer has been set up, it will be shown on every change even if AnyDesk is installed already
- Most of the edits in AnyDesk now support context menu operations (paste, cut, clear, undo)
- AnyDesk will no longer follow the remote cursor when the local user changed the tab himself
- Improved address book update performance
AnyDesk 4.0.1
Fixed Bugs:
- SAS for Windows 8 and upwards was broken due to an extension handling Terminal Server
- On Terminal Server switching to advanced view may have resulted in a crash
AnyDesk 4.0.0
Extended support for Terminal Server:
- On connecting to a terminal server the user can choose now if to connect to the console session or a specific user. As an alternative a fully specified address can be used to directly connect to a a specific user
- Added file manager session type. The file manager can also be used during a normal session
- Session recording and playback. Enable this option under "privacy" in the options tab
- Optional auto-locking of the Windows session on AnyDesk session end
- Follow mouse cursor feature: When activated, the monitor selection follows the remote mouse cursor
- Auto-Update
- The user can now choose an alias
- Client Generator: Updates can now be disabled
AnyDesk 3.7.0
Fixed Bugs:
- Security change: fixed a bug where the permissions could be reset during the session
- In some cases, the AnyDesk main window was not rendered correctly in Windows 10 (showing transparent areas)
AnyDesk 3.6.3
- Fixed a crash when terminating AnyDesk using the tray icon while sessions were running
- Under rare conditions, connecting to Windows 10 showed no image/a black image
- Clipboard permission works again
- Disallowed to change the license key if settings are disabled
- Fixed SAS (Ctrl+Alt+Del) which did not work under some conditions on Windows Vista and upwards.On some Windows 10 systems, AnyDesk did not work when the monitor was rotated. On these systems, AnyDesk should now transmit the monitor content normally
- Fixed two rarely occuring crashes on address book close
AnyDesk 3.6.2
Fixed Bugs:
- Trying to add an address from the speed dial to an address book with a license of type free or lite
- opened a dialog instead of the address book
- Fixed screensaver settings on AnyDesk session close. This was broken due to a bug in Windows
- Fixed session comment dialog which could appear twice
Other Changes:
- Made license key removal more explicit and added option 'Change license key' to the main menu
AnyDesk 3.6.1
- Fixed Bugs
- Important security update, fixed dll injection vulnerability. Thanks to 0x09AL for reporting this
AnyDesk 3.6.0
- Transmission of system information can now be blocked. Older versions of AnyDesk will show useless information in this case
- Added a setting to disable the chat log
- Added a setting to choose the path to the chat log
- Added a setting to show the address book on startup
- Added a setting to allow the accept window to go to foreground on chat message received
AnyDesk 3.5.0
New Features:
- The remote restart feature now even works when AnyDesk is not installed
- Please note: You will need to request elevation from the remote user before using the restart feature in this case
- Custom AnyDesk: Text and title of ID and Connect Group (Main Window) can now be customized
- Custom AnyDesk: Before frontend startup a disclaimer can be shown now, which can be customized in logo, title, text, background color and the text on the accept and cancel buttons. It is shown only, if AnyDesk is not installed and the text contains non-whitespaces. All other settings are optional
- Custom AnyDesk: Added support for environment variables in paths
Fixed Bugs:
- In the D3D fullscreen menu the keyboard mode has always been set to 'translate'
- The invitation link in the main window has not been shown anymore after switching to advanced view and back
- Fixed crash on opening the chat log in the backend after session close
- Fixed crash when the session info panel was closed before the remote data was displayed
Fixed Bugs:
- Fixed custom logo layout in the main window's advanced view
- Fixed the connection panel's password edit showing clear text when disabled
AnyDesk 3.4.1
- Fixed dpi of comment session dialog
- Fixed that the comment session dialog can be shown although the licence is of type Lite
- Fixed a crash related to the comment session dialog
- Fixed that the character right of '9' on the standard hungarian keyboard layout has not been recognized before
AnyDesk 3.4.0
New Features:
- Sessions can now be commented on close. The comment can then be looked up on my.anydesk.com. If you don't want to comment, just clear the comment field. You will need a licence in order to use this new feature
- Address Book: AnyDesk now supports multiple address books. They can be added (up to a certain limit) and deleted. The number of available address books depends on your licence
- Status bars now also show the remote user name
Fixed Bugs:
- Fixed a crash on connecting due to monitor detection failure
- Address Book: Fixed tag validation on rename
- After elevation the backend user name in the chat was SYSTEM
Other Changes:
- Fixed and updated interfaces of installer, uninstaller, updater and global settings windows
AnyDesk 3.3.2
- Important security update. Please update if you have version 3.3.1
- Fixed a crash when using the drop to desktop feature
AnyDesk 3.3.1
- Fixed a crash on connecting due to monitor detection failure
- Fixed ACL denying access although the list is empty
AnyDesk 3.3.0
New Features:
- Address book: The name of an address can be set now on adding it to the address book
- Address book: Tags can now be renamed and removed from the tag tree view directly (on the left) Right click on a tag to choose
- Address book: Added commands 'Expand All' and 'Collapse All' to the tag tree view Right click on a tag or the tag tree view itself to choose
- Address Book: If a user action fails an error info dialog will be shown now
- When adding an address from the speed dial to the address book, a dialog will be shown now
- When connecting to a multi monitor system, AnyDesk now automatically switches to the primary monitor
Fixed Bugs:
- Fixed a crash after installing AnyDesk on Windows XP
- Address book: Fixed selected tags view layout (on top)
- Fixed service crash after installation due to invalid install parameters
- Fixed a crash on closing a session using OpenGL
- Using the mirror driver the backend detected more monitors than physically available, in case a software for virtual monitor creation is installed
Other Changes:
- Address Book: The list view now auto-sizes its columns
- Most text edits now select their content on getting keyboard focus
AnyDesk 3.2.5
- Fixed a crash after remote restart
- Fixed a bug in feature availability indicator in menu
- Fixed a bug in the address book that did not allow to add an item from the speed dial to the address book directly after startup
AnyDesk 3.2.4
Fixed Bugs:
- Fixed a bug which allowed two dialogs to be shown at the same time
- Fixed remote cursor rendering at the edges of the view
- Fixed a bug which let elevation fail when Windows denied access to the AnyDesk executable.
- Fixed a bug which led to the service shutting down automatically on elevating its backend, in case
- AnyDesk has not been installed on that side and the main window there has been closed before elevation
- Fixed the action menu showing elevation was available although the backend has been elevated already
- Fixed a race condition in the address book which made it unusable in some situations
- Fixed a bug in feature availability indicator in menu
Other changes:
- Added a hint in the elevation dialog that the remote user usually has to accept an elevation request
AnyDesk 3.2.3
Fixed Bugs:
- Fixed a regression which impaired AnyDesk's performance severely when connected to a Windows 8, 8.1 or 10 computer. Please update!
- Fixed a bug which caused the auto-reconnect feature after a remote restart to fail when the global settings dialog was opened previously
- Fixed a crash when using the "Retry" button in the remote desktop access denied dialog
- Improved stability
Other Changes:
- Improved feature availability indicator in menu
AnyDesk 3.2.2
Fixed Bugs:
- Fixed a bug which could lead to the service not starting timely after installing AnyDesk
- Fixed a crash which occured when closing the address book and terminating AnyDesk
- Fixed a crash by using ddraw as fallback for d3d when the graphics driver is not installed
- correctly and causes an exception during initialization
- Tags are validated now in the address book
Other Changes:
- Improved focus behaviour of controls
AnyDesk 3.2.1
Fixed Bugs:
- Fixed crash on adding an address to the address book
- Fixed elevation with credentials in case AnyDesk has been started from a user folder
- Fixed a crash which could occur when terminating a session with an open address book or multiple monitors
- Fixed character keyboard input which was not working for certain programs (GTK, QT) when connected from a mobile device
Other changes:
- Improved prompt shown in the password dialog when connecting
- Controls now show if focused
AnyDesk 3.2.0
New Features:
- The address book now remembers the last used view type (list/tiles)
- The address book now offers sorting options
- The address book now opens the tag dialog immediately after an address has been added
- The accept window will no longer auto-close tabs when chat messages have been sent/received
- Sessions can now be accepted via 'Enter' and dismissed via 'Esc'
- Added session status messages to chat
- The session time is now shown during a session and after disconnect
- The remote user client ID is now shown during a session (additionally to its alias)
- Your fingerprint can now be seen in the about panel
- The password for unattended access is now controlled via a dialog
You have to enter your password twice to check for misspellings
- Added language auto-selection (will select system language)
Fixed Bugs:
- Fixed WoA
- Fixed elevation with credentials
- The direct connection icon in the backend was greyed out although there was a direct connection
- The drop link feature dropped an invalid link (name instead of address)
- After disconnect it was no longer possible to mark/copy chat messages
- Fixed a crash that could occur on sending chat messages
- Some chat messages have not been recorded
- Fixed some minor bugs in the chat
- Fixed wrong message shown in the frontend on session request rejected
- Fixed some bugs with keyboard focus
- Fixed a bug with auto-selection of tabs in accept window
- Sometimes the address book did not show online states on opening it the first time
- Fixed some bugs with tag selection in the address book
- Fixed a crash that could occur when closing the main window with the address book opened
- Fixed filtering of recent connections
- Fixed recent connection being removed from favorites on name change
- In some cases a wrong text has been shown on connection request
- Fixed various minor bugs
Other Changes:
- The accept/dismiss buttons are now disabled for a short time when entering a new session state to prevent accidentally clicking them
- The accept window is now only always on top when there are not yet accepted sessions left. And it will be back on top on session request
- The accept window will now auto-select an incoming session tab in some situations
- Added bottom right resize corner
- Fixed some dpi issues
- Added some localization
AnyDesk 3.1.1
Fixed Bugs:
- Improved stability
- Fixed some bugs in the chat
- Other changes
- Signed the exe and msi files with two certificates.
AnyDesk 3.1.0
New Features:
- Reworked the chat in the client
- Added an option to disable remote restart in the security settings
Fixed Bugs:
- Fixed a bug in DeskRT which caused it to be slow on certain monitor resolutions indivisible by 16 (for example 1366x768). Responsiveness should be much higher now in these cases
- In some cases, the view mode settings for remote computers were not restored correctly for future sessions
- Fixed a crash which could occur when connecting to AnyDesk while it was terminating
- Fixed a bug which could lead to the system info feature not being available
- Improved stability
- Minor user interface layout fixes
AnyDesk 3.0.0
- Added edge scrolling feature for the original view mode: use this when the remote image is much larger than the local monitor
AnyDesk 2.6.1
New Features:
- Implemented customisation support for my.anydesk.com for macOS
Fixed Bugs:
- Enable/disable audio works now
- Receive connection window constraints were fixed
AnyDesk 2.6.0
New Features:
- Implemented Access Control List feature. This makes it possible to restrict access to machines based on the alias. Wildcards are supported, for example "*@company", "pc-?@ad" and so on. Restrictions based solely on the numerical id are also supported. You can find the feature in the Security Panel of the AnyDesk settings.
Fixed Bugs:
- Fixed a bug where the file transfer and probably the text clipboard did not work on Windows 7 when UAC was disabled and AnyDesk was not installed.
- Fixed a regression which could lead to being unable to control the remote machine after activating a privileged window in the task bar when AnyDesk was not installed.
- Fixed a bug which could cause severe image lag after using the "switch sides" or "request elevation" features or doing a fast user switch of a remote controlled Windows session.
Other Changes:
- The remote users input is now temporarily disabled when typing on the local keyboard. In previous versions, only moving the mouse disabled remote input.
AnyDesk 2.5.0
New Features:
- Implemented remote restart feature: The connection will automatically be restored once the remote machine finished restarting
- Added a confirmation dialog for the switch sides feature
- The coloured user pointer can now be disabled in the security settings
Fixed Bugs:
- Fixed a bug which could lead to a wrong aspect ratio image or no image at all when connecting to a multi monitor system until the first resize of the session window
- Fixed image corruption which could occur when the mirror driver was used
- Fixed some inconsistencies in the remote capabilities for the request elevation and the switch sides feature when connecting between different platforms
- Improved stability
Other Changes:
- The uninstaller (anydesk --remove) now accepts the --silent flag
AnyDesk 2.3.5
Fixed Bugs:
- Fixed image capture when connecting to outdated Windows 7 versions
- Fixed a bug in the license registration dialog
Other Changes:
- Long IDs are now displayed in groups of 3 digits
AnyDesk 2.3.4
Fixed Bugs
- Fixed image problems with 16-bit/fast rendering method.
- Fixed a few more high DPI issues.
- Fixed protocol compatibility with the Enterprise server.
- Fixed a crash that could occur when the system info tab was opened a second time.
- The system info tab could be opened before authentication, which resulted in a crash.