ALLPlayer 歷史版本列表
更新時間：2020-06-10
更新細節：
What's new in this version:
Fixed:
- MIDI CC modulator: Learn CC function could sometimes crash the audio engine
- Crash when dragging a group track from the browser (in the Files tab) into an open project with fewer scenes available
- When showing system file dialogs, plug-in windows are temporarily closed and keyboard input is suspended
- When plug-in windows are temporarily hidden (e.g, when showing Pop-up Browser or Dashboard is called up), keyboard input is suspended and then restore plug-in windows in the same display order
- Fixed audio engine crash when using audio interfaces with only one input or output channel
- Random rare crashes when undoing with certain controllers connected
- macOS: added entitlement that is required by plug-ins that use eLicenser
- Use a weaker random seed generator to avoid failures when too many files are open
更新時間：2020-06-09
更新細節：
What's new in this version:
- In the screen settings, added high frame rate mode in Native mode and supported 90 frames (VIP)Note: The phone should be able to support 90 frames, such as XiaoMi 10
- PUBG Mobile: smart key supported one-key switch scope; supported smart key for 1600 resolution devices(VIP)
- Note: Please re-download the official VIP keymapping scheme
- Added the slide command in the macro key Users can set up the sliding position and speed (VIP)
- Added 3 options in intelligent casting key for MOBA mobile games(such as :Arean of Valor) : reverse casting, walking following casting and walking following attack(VIP)
- Added view angle key to look around
- Added IP address connection mode in the projection
更新時間：2020-06-04
更新細節：
What's new in this version:
New Device: EQ+ (EQ):
- EQ driven by a new algorithm and a unique style of graphic interface
- 14 filter mode types for each band
- Global frequency Shift and Gain controls for moving all bands together
- Adaptive-Q option, narrowing the Q of bands as their gain increases
- Quick gestures for adding bands:
- Peak filters are added by double-clicking at the current mouse cursor position
- Low-/high-shelf filters are added by dragging the left/right edges of the EQ curve
- Low-/high-cut filters are added by dragging the left/right edges of the EQ graph (off the curve)
- Notch filters are added by dragging the lower edge of the EQ graph
- Different mouse cursors are shown to identify each interaction's filter mode
- Clicking on the selected band's audition target soloes that band while the mouse/touch is held
- Numeric controls for the selected band are shown (with all bands displayed in the Inspector)
- Expanded Device View for large/detachable version of the graphical editor (with all bands displayed in the Device Panel)
- EQ curve is shown on a rainbow spectrum, with each band's color set by its frequency
- Select a Reference track, which will be show as a purple curve inside the spectrum display
- Spectrum display includes frequency Tilt and decibel range settings, as well as Speed and Resolution controls
New Device: Saturator (Destruction):
- Unique signal shaper that works in the log domain (like us )
- Basic panel interface with transfer function display, Drive amount, Normalize option, low-pass controls for just saturated portion of the signal, and Makeup Gain
- Filter Slope setting offers two flavors of filter: G modes are a bit more gentle, and R modes tend to be rougher. So 3ᴳ is gentle at 18 dB/oct, 1ᴿ is a rough with 6 dB/oct, etc.
- Expanded curve editor that provides:
- Quiet and loud Threshold settings, to define each end of the sound
- Quiet and loud Amount settings, controlling how the signal is proportionately changed beyond each Threshold
- Quiet and loud Knee settings, for how gradual each transition is
- Three Skew controls, for making the loud Threshold, Amount, and Knee controls apply differently to positive and negative amplitudes
- An interactive log display of these controls and the incoming signal
- New Grid module: Saturator (Shaper) - module version of the device, allowing for polyphonic applications in The Grid
Updated Device: Arpeggiator (Note FX):
- Each step now has a pitch offset slider (in addition to the velocity and note length controls), and a global toggle for enabling all steps
- New Humanize parameter randomizes velocities and step start times and lengths (either earlier or later)
- Nine new Pattern options, for 17 in total
- Rate can now be set in milliseconds
- Micro-pitch expressions are now tracked for each note
- Poly Pressure to Velocity option replaces initial note velocities with any polyphonic pressure message (like those from MPE controllers) received
- Option to Allow Overlapping Notes can be toggled on (default) or off
- Trigger Immediately option allows notes to start off the beat grid
- Release Immediately option uses the final note off to instantly end sound (instead of lasting the full step length)
- New Octave Behavior option, used when the Octave Range is greater than one. Settings include…
- Broad - Takes each additional octave in sequence, stacking them up with possible irregular/repeating patterns. (This is the default.)
- Thin - Flattens & sorts all notes into one linear shape. (This was the Arpeggiator behavior in v3.1.x and earlier.)
- 1 by 1 - Executes the full pattern in each octave before moving to the next octave.
Updated Devices: Selectors (Container) Get Voice Modes:
- Instrument Selector, Note FX Selector, and audio FX Selector now have voice modes in the Inspector for cycling thru the available layers in various ways
Modes (and example uses) include:
- Manual (same as the behavior up to 3.1.x) - Target layer is set by user, controller, modulator, and/or automation
- Round-robin - New note triggers the next layer (for notes in series, or individual notes within a chord)
- Free-robin - Round-robin, but skips used voices when possible
- Free Voice - New note uses the first free layer. Always starts with the first layer for more predictable results. (Also ideal for loading multiple layers with HW CV Instrument to create polyphony with Eurorack hardware.)
- Random - New note randomly selects a layer (nice with a pile of different audio FX)
- Random Other - New note randomly selects a different layer (to guarantee a change each time)
- Keyswitches - Designated notes set the target layer (you define the lowest keyswitch; so if set to note C2 and the Selector has 3 layers, C2 switches to layer 1, C#2 switches to layer two, and D2 switches to layer 3). Good for film scoring with different sounds and articulations.
- CC - Designated continuous controller sets target layer (you define a continuous controller [default CC1 - mod wheel], whose full range will morph evenly thru all layers). For example, using mod wheel to cycle thru various note FX.
- Program Change - PC messages set the target layer (program change messages map directly to each layer). Common output from pedal controllers, etc.
- Other than Manual, all other modes are aware of the layer count. So adding or removing layers will just work without additional configuration.
Delay Options, for Evolving Sounds:
- New device: Note Delay, to delay an entire device chain/layer either in beats or seconds
- ADSR, AHDSR & Note Sidechain modulators: now have a Pre-delay option for delaying their start either in beats or seconds
- New Grid module: Logic Delay (Logic), for delaying the high- or low-logic portion of gate signals
- New modulator: AHD on Release (Envelope), a triggered envelope that launches at note off
Other New Features:
- New Grid module: XP (Filter) - a modulatable filter with key tracking and 15 modes, including combos
- New Grid module: Array (Data) - a recordable sequencer, for keeping track of up to 1024 events, notes, velocities, or anything else
- New Grid module: N-Latch (Logic) - tracks the last trigger received from up to eight inputs, for an exclusive solo-type relationship
- The Mix Panel now has mini displays of various devices, showing EQ curves (for EQ+, EQ-5, and EQ-2) or gain reduction amounts (for Compressor, De-Esser, Dynamics, Gate, and Peak Limiter)
- Drum Machine device: now supports internal audio returns
- Drum Machine device: option to select drum pads by following played notes (the five-pin MIDI icon)
- In The Grid : dropping a sample or multisample into a Grid patch creates a Sampler module and loads the sound source
- EQ-2, EQ-5 & Resonator Bank devices: color each band by its frequency (like EQ+)
- Test Tone device: Frequency parameter is colored with the rainbow spectrum
- Added controller script for Befaco VCMC
Improvements:
- Interactive help window now includes links to related video tutorials (at the bottom of the window)
- Opening a clip (BWCLIP) or preset (BWPRESET) file from the OS file manager will load the file onto a new track in the open project
- Improved Ableton Link and MIDI clock slave synchronization
- Transpose actions now work on audio clips (via the pitch expression)
- Time and event selections display their length in minutes and seconds in the Inspector Panel
- Both Arranger clips and cue markers can now be renamed with the standard command
- User files can be renamed within the Browser Panel, and from the Files tab of the Project Panel
- New preference for whether clicking a mixer solo button should disable all other solos ("exclusive solo") or not. Shift-click performs the inverse behavior.
- Drum Machine device: drum cells now swap when dragged on top of each other
- EQ-5 and EQ+ devices: spectrum analyzers now have Resolution and fall Speed controls
- Spectrum device & Grid module: now have Resolution, fall Speed, Tilt, Scale, Range, and drawing Style controls
- Tool device: now has an additional Volume control that bottoms out at silence
- Vocoder device: Now suggests presets as either instruments or audio FX, depending on the contents of the Modulator chain
- Steps & ParSeq-8 modulators: New with Groove mode, which syncs to the Global Transport with groove (when active)
- Steps (Data) Grid module - new Interpolation option, for crossfading between step values; also a great way to create a lookup table
- AD (Envelope) Grid module - new Looping option, to retrigger the envelope if the gate signal (often from the keyboard) is still held down when the envelope completes
- New preference for whether middle mouse button drags will just pan in note editors, or pan and zoom
- Audio engine: better parameter automation for VST2 and VST3 plug-ins (they now update at least every 64 samples)
- The left/right edge of the clip's loop region can be dragged in the Detail Editor Panel (even when the edge is offscreen)
- Note and clip stretching targets (left and right edges) are a bit wider
- When dragging multiple notes, small chords (up to four notes) will preview all notes; larger chords will sound only the note clicked on
- When moving multiple notes with the keyboard, only the earliest note will sound
- Improved Tap Tempo, to recognize tempo changes more quickly
- Tap Tempo can now be manually mapped in the Mapping Browser Panel
- Toggle Device Window is now mappable
- New Shortcut: Toggle Primary Device Window
- DSP Performance Graph window now shows if the audio timing is coming from the audio interface or if it is approximated
- Linux: it wasn't possible to drag files from some external applications (written using Qt, for example) into Bitwig Studio
ControlSurface API version 11:
- ContinuousHardwareControl now has information about the name and value of the target it is controlling
- Hardware controllers using the new API now have sub-buffer accuracy and no jitter when controlling parameters
- Manual MIDI mappings in a project now have lower latency, sub-sample accuracy, and no jitter when controlling parameters
- Indicators on the parameters are now automatically provided (no need to manually call Parameter.setIndication)
- Now possible to map controls to MIDI pitch bend messages
- Ability to choose between physical or logical knob/slider for a mapping in mapping browser
- Ability to decide if a MIDI note mapping applies always or only when it is used for note input
Fixes:
- Undo was not possible after pressing escape key while dragging note velocity
- Duplicating notes across multiple launcher clips in layered note editor did not select all duplicated notes
- ALT-dragging a time selection on an instrument track to new track was bounces the selection, but was creating another instrument track
- Gate device: input signal was stuck at zero
- Instrument Selector device: playing the same notes on different channels created stuck notes
- Oscilloscope device: deactivating trace B wasn't affecting the Expanded Device View
- Random modulator: would sometimes jump when in Sync mode
- Mix modulator: modulator source now follows the device's name
- Fixed incorrect value on polyphonically modulated indexed controls
- Some modulator values were not showing properly in the window footer on parameter hover
- Fixed keyboard navigation between columns inside the Pop-up Browser
- Scrolling through presets using a controller on the Pop-up Browser could be difficult because each preset was loaded instead of waiting a short time for the user to settle on a preset
- Latest device descriptions are shown in the Inspector Panel
- Crash when parsing some invalid SoundFont 2 files
- No longer sends the MIDI Clock and MIDI Timecode when the engine is not processing in realtime
- Fixed ghost note with some plug-ins when overlapping notes where played
- Draw issue with open VST GUI button in the track mixer
- VST2: kVstBarsValid flag was not set even when bar data was provided
- If many underruns occurred, controllers that used the new hardware API may lag more than they should when adjusting parameters
- Ignore mapping low level MIDI events that we detect are used for touch or release of a control
- Random crashes that can happen when various controllers are running
- macOS: dragging items might cause high CPU load in some cases
- macOS: added missing entitlements for plug-ins that use eLicenser
- macOS: drop operation occasionally happens only on the next mouse/key event when dropping items using trackpad
- Linux: audio engine crash when selecting some ALSA audio outputs
- Linux: crash when scaling GUI above 300%
- Linux: When plug-in window is focused, allow key events to still work as though the Bitwig window was focused (for example, keyboard note input will still work)
- Surge VST3: was showing a black window on Linux
更新時間：2020-05-29
更新細節：
更新時間：2020-05-28
更新細節：
更新時間：2020-05-27
更新細節：
What's new in this version:
Improved:
- Stability
- Speed of the program
- Option of adding subtitles to the movie
- Fixed some smaller errors reported by users
更新時間：2020-05-27
更新細節：
更新時間：2020-05-27
更新細節：
What's new in this version:
- When using the DATENAME function with the quarter option in Tableau Desktop and with a live connection to an Exasol database, the incorrect quarter is displayed
- When connecting to Amazon Athena, views did not display in the connection window
更新時間：2020-05-26
更新細節：
What's new in this version:
New:
- Support for Beatsource LINK streaming service
- Added a vocal analysis feature that detects and displays the vocal position in the track
- Added XDJ-RX and RB-DMX1 to Hardware Unlock device list
Improved:
Support for Beatport LINK service has been significantly updated:
- Loaded tracks will no longer be automatically saved to Offline Locker
- More search categories including Artist and Album
- Improved search feature in the Search Tracks and Genre trees
- The Offline Locker tree now shows the number of tracks in the Locker
- USER Color setting is now available on the Lighting panel
Improvement made to the Cloud Library Sync:
- Auto Upload to automatically upload tracks to cloud storage when tracks are added to a specific playlist
- Renewed phrase analysis display in the waveform
- Ability to show an error when connecting a USB device/SD card formatted with an unsupported file system
- Save Sampler Sequence unlocked in PERFORMANCE mode when connecting DDJ-RZX, RZ, RX, or and RR
- Improved Auto Start time of Ambient Mode of Lighting function from 5 seconds to 1 second
Fixed:
- The channel level indicator on the DDJ-WeGO2 didn't light up
- EXPORT mode keyboard shortcuts [Shrink beat intervals] and [Expand beat intervals] were reversed
- Unable to login to YouTube and upload DJ mix
- Browse delayed when Related Tracks are displayed in a sub-panel
- Related Tracks and Track Suggestion were slow to retrieve and it took a long time to load from there
- Improved stability and fixes for other minor issues
更新時間：2020-05-23
更新細節：
What's new in this version:
- Dramatically improved accessibility support, including support for screen readers, keyboard navigation improvements, focus indicators and contrast improvements, and more
- Real-time spellchecking with customizable dictionaries and inline correction suggestions
- Dozens of other productivity improvements, including auto-save, global search and replace, and Shiny background jobs
- All preferences and settings are now saved centrally in plain text files, and can be set by admins and backed up by users
- Compatibility with iPad OS 13 for RStudio Server
- RStudio Desktop Pro can now function as a client for RStudio Server Pro; access your server’s compute power and environments with the convenience of a windowed desktop application
Accessibility:
Dramatically improved accessibility for sight-impaired users, including:
- Keyboard focus management and visibility upgrades
- Improved keyboard navigation
- Compatibility with popular screen readers
- Compliant contrast ratios and other accessibility improvements
- User preference for disabling user-interface animations such as when zooming panes
Spell Check:
- Real-time spell-checking engine for checking while editing
- Customizable dictionaries and word ignore lists preloaded with common R terms
- Inline correction suggestions
Preferences and Configuration:
- All user preferences and settings can now be set using a plain JSON file
- All user preferences can now have global defaults set by a system administrator
- New diagnostics commands for editing the prefs file, resetting state, and viewing pref system data
- Editor themes, snippets, file templates, and keybindings are now portable and can be installed by admins
- The content of new file templates (New R Script, New R Markdown, etc.) can now be controlled by users or administrators
- renv
- New projects can be initialized with renv, giving them an isolated project environment
Server Security:
- New auth-timeout-minutes option signs users out after a defined period of inactivity
- CSRF hardening improvements including optional validation of the HTTP Origin header
- Add option auth-cookies-force-secure to always mark auth cookies as secure when SSL is terminated upstream
- Set HTTP header X-Content-Type-Options to discourage MIME type sniffing
- Authentication cookies are now revoked after signout
- File-serving resource endpoints can now be made more restrictive; added new restrict-directory-view and directory-view-whitelist options
- RStudio Server now uses 2048 bit RSA keys, for secure communication of encrypted credentials between server / session and client
Terminal Improvements:
- User preference to configure initial working directory of new terminals
- Command to open a new terminal at location of current editor file
- Command to insert the full path and filename of current editor file into terminal
- Command in File pane to open a new terminal at File pane’s current location
- Command in to change terminal to current RStudio working directory
- PowerShell Core option in terminal (Windows-only)
- Custom terminal shell option for Windows desktop (previously only on Mac, Linux, and server)
- Change shortcuts for Next/Previous terminal to avoid clash with common Windows shortcuts
- Suppress macOS Catalina message about switching to zsh in Terminal pane
- Add ‘Close All Terminals’ command to Terminal menu
- Zsh option in terminal for Mac and Linux desktop, and RStudio Server
- Diagnostics and Recovery:
- Add automated crash handling and reporting
- Show detailed logs and process output when R fails to start
- Add “Safe Mode” for opening sessions without profile scripts or workspace restoration
Tutorials:
- Support for tutorials with the learnr package in a new Tutorials pane
Background Jobs:
- Add support for running Shiny applications as background jobs
- Install missing package dependencies in a background job
Auto Save:
- Changes automatically (and optionally) saved to disk after a few seconds or when editor loses focus
- Option to disable real-time backup of unsaved changes to avoid conflicts with Google Drive, Dropbox, etc
- Option to adjust idle interval for backup or saving changes
Miscellaneous:
- Add global replace with live preview and regular expression support
- Enable large file uploads (over 4GB) in RStudio Server
- Improved ‘Comment / Uncomment’ handling of empty lines around selection
- Files with extension ‘.q’ are no longer indexed or parsed as R files
- Add support for an API command to return the list of R packages RStudio depends on
- Upgrade internal JSON parsing engine for speed improvements
- Improved ergonomics for history prefix navigation
- Make columns resizable in the Environment pane
- Add Word Count command
- Keyboard shortcuts for main menu items on RStudio Server (e.g. Ctrl+Alt+F for File menu)
- Show number of characters when entering version control commit messages
- Update embedded Qt to 5.12.5 for Chromium update, stability and bugfixes
- Add preference for changing font size on help pane
- Warn when Xcode license has not been agreed to on macOS when command line tools required
- Improved browser tab names (project name first, complete product name) (Pr
- The diagnostics system now understands referenced symbols in glue strings
- Add preference for compiling .tex files with tinytex
- Long menus and popups now scroll instead of overflowing (#1760, #1794
- Sort package-installed R Markdown templates alphabetically
- The ‘Reopen with Encoding’ command now saves unsaved changes before re-opening the document.
- Autocomplete support for Plumber #* comment keywords
- Automatically continue Plumber #* on successive lines
- Comment / uncomment is now enabled for YAML documents
- Reflow comment has been rebound to ‘Ctrl + Shift + /’ on macOS.
- Allow fuzzy matches in help topic search
- The diagnostics system better handles missing expressions
- Keyboard shortcuts for debugging commands can be customized
- Update Pandoc to 2.7.3
- Update SumatraPDF to version 3.1.2
- Allow previewing PDFs in fullscreen mode in Sumatra PDF
- RStudio Server runtime files are stored in /var/run, or another configurable location, instead of /tmp
- Errors encountered when attempting to find Rtools installations are handled more gracefully
- Enable copying images to the clipboard from the Plots pane
- Update minimum supported browser versions
- Automatic refresh of the Git pane can now be enabled / disabled as required.
- Target directory can be changed from within the ‘Upload Files’ dialog (RStudio
- Zoom Left/Right Column commands for keyboard users
- Increase maximum plot size for large, high-DPI displays
- Make maximum lines in R console configurable; was previously fixed at 1000
- Option to only show project name instead of full path in desktop window title
- New rstudio --version command to return the version of RStudio Desktop
- Scan R Markdown YAML header for R packages required to render document
- Support use of F13 - F24 for custom keyboard shortcuts (full Mac keyboard has F13-F19, for example)
- Keyboard shortcuts for searching R help in Help pane, and next/previous help page
- Keep keyboard focus in the console during debugging
- Enable wrap-around for previous/next source tab by default
- Provide full SHA in detail of Git commits
- File monitor now ignores Packrat, renv library folders
- Make global source control commands rebindable
Bugfixes:
- Fix issue where calling install.packages() without arguments would fail
- Fix issue where C code in packages would incorrectly be diagnosed as C++
- Fix plot history when plot() called immediately after dev.off()
- Fix debug stopping past breakpoint when source windows are open
- Fix diagnostics error with multibyte characters in R Markdown documents on Windows
- Fix stale processes when invoking child R processes with large command lines
- Fix an issue where help tooltips could become corrupt when using prettycode
- Fix an issue where signature tooltips were shown even when disabled by user preference
- Fix an issue where Git did not work within projects whose paths contained multibyte characters
- Fix an issue where RStudio would fail to preview self-contained bookdown books
- Fix modal dialog boundaries extending out of the app window in certain cases
- Fix issue where session restore could fail when using multiple user l
- Fix issue where library paths were not forwarded when building package docum
- Restore ability to select and copy text in version control diffs
- Fix incorrect column names when non-dataframes with a column named x were viewed
- Fix inconsistent shading in R Markdown chunk backgrounds with folding
- Fix list column display in columns past 50 with data viewer
- Fix incorrect column type display when paging columns
- Fix incorrect sorting in data viewer when paging columns
- Fix carryover of light ANSI background colors
- Fix issue where Shiny applications using reticulate on Windows could crash on run
- Fix issue where pasting text into last chunk in document could occasionally cause hang
- Fix blank Viewer Pane when displaying most HTML widgets with R 4.0.0