Qt Creator

What's new in this version:

- bgp - added support for BGP advertisement displaying (CLI only)
- bgp - fixed reporting of session uptime
- bgp - improved session establishment speed after bootup
- bonding - fixed ARP monitor packets with bond's MAC address
- bonding - improved interface stability on slave configuration changes
- bonding - reduce "actual-mtu" according to interface "l2mtu"
- branding - execute "autorun.scr" file when installing branding package
- capsman - fixed RADIUS accounting when EAP is used
- certificate - fixed SHA1 certificate name lookup
- certificate - improved certificate management, signing and storing processes
- certificate - restricted maximum retry attempt window for Let's Encrypt certificate to 60 minutes
- container - added "start-on-boot" parameter for automatic container startup
- container - allow changing container related parameters while it is running
- container - fixed usage of non-authenticated registries
- dhcpv4-server - fixed matcher functionality
- dhcpv4-server - fixed RADIUS accounting for local leases
- dhcpv4-server - improved service stability when removing dynamic leases
- dhcpv6-client - fixed false error status reporting when server offers T1 or T2 value as 0
- dns - added "match-subdomain" option for static entries (CLI only)
- dot1x - fixed incorrect error when using "mac-auth"
- ethernet - added "5Gbps" option for speed setting
- firewall - added "src/dst-address-type" parameter under "IPv6/Firewall/Mangle" menu
- firewall - disable IRC NAT helper on upgrade
- firewall - fixed IPv6 filtering with "in/out-interface" matcher that is in VRF
- firewall - fixed IRC NAT helper (CVE-2022-2663)
- firewall - fixed usage of "netmap" action for IPv6 source NAT
- health - fixed fan speed and temperature reporting on CCR1072
- health - improved voltage reading on RBmAP-2nD
- hotspot - fixed service initialization when HTML directory configured on an external disk
- hotspot - fixed SSL usage on all HotSpot pages
- hotspot - improved stability when receiving bogus packets
- hotspot - limit maximum allowed connections based on free RAM resources
- hotspot - removed "routerboard.com" URL from default HotSpot advertise
- interface - added warning when interface has configured "mtu" higher than "l2mtu"
- ipsec - added "invalid-packets" counter for Installed SA's menu
- ipsec - fixed packet processing by hardware encryption engine on MMIPS devices
- l3hw - added "l3hw-settings" sub menu under the switch menu
- l3hw - added support for IPv6 route offloading (disabled by default)
- l3hw - fixed "H" flag presence for accelerated connection tracking entries
- l3hw - fixed possible packet loss when using HW offloaded NAT
- l3hw - improved connected host offloading on startup
- l3hw - improved connected IPv6 host offloading when routing table is nearly full for 98DX224S, 98DX226S, and 98DX3236 switch chips
- l3hw - improved system stability
- l3hw - made route offloading selection work only on unicast
- lte - added interface name in MTU debug logging message
- lte - added periodic IPv6 RS to trigger IPv6 adress acquisition for non-MBIM modems
- lte - added support for Neoway N75-EA
- lte - added support to perform FOTA upgrade from local file for EG12-EA, EG18-EA, RG502Q-AE, EG06-A, EP06-A modems
- lte - disabled RPLMN on Chateau 5G
- lte - fixed at-chat on Telit FN980m
- lte - fixed handover from UMTS to LTE when PS activation had failed for MBIM modems
- lte - fixed MBIM modem initialization
- lte - fixed re-attaching on PS detach for MBIM modems
- lte - removed reconnect delay after receiving DETACH notification for MBIM modems
- macsec - added configuration support with VLAN, ARP, DHCP and bridge tagging/untagging
- macsec - added logging support with "debug" and "dot1x" topics
- macsec - added support for MTU and L2MTU
- macsec - fixed interface after Ethernet link down
- macsec - fixed interface statistics and missing properties
- macsec - fixed interface status
- macsec - fixed multiple interface creation on different Ethernet port
- macsec - improved interface stability
- macsec - improved system stability for TILE and RB5009 devices
- macsec - removed interface from SMIPS devices
- mac-telnet - respect interface MTU setting when sending packets for MAC-Telnet and MAC-WinBox
- netwatch - fixed string variable values in script
- ntp - improved initial synchronization speed after bootup
- ospf - added SHA hashing for authentication
- ospf - fixed area "no-summary" setting
- ospf - fixed checksum calculation
- ospf - fixed displaying of VRF interface in related logs
- ospf - fixed transmit of LSA/ACK's on p2p interfaces
- ospf - improved logging when invalid configuration is detected
- ospf - refresh OSPFv3 interface configuration when IPv6 network becomes available
- ovpn - added IPv6 support
- ovpn - added VRF support for client
- ppp - fixed memory leak
- ppp - improved service stability when multiple users disconnect simultaneously
- pppoe - fixed MRU negotiation even when it is set to 1500
- qsfp - added interface temperature warnings and shutdown
- queue - improved stability for CAKE type queues
- radius - require "policy" policy for "login" service configuration
- rip - fixed passwordless MD5 authentication
- route-filter - fixed filtering for multiple community routes
- route-filter - fixed memory allocation when moving entries
- route - fixed disappearance of inactive static routes after upgrade
- route - fixed memory leak
- routerboard - return router's short name in "model" parameter
- routerboard - set "Delete" as default key to enter booter menu ("/system routerboard upgrade" required)
- serial - added support for newer PL2303 serial controllers
- sfp - improved QSFP/SFP interface stability for 98DXxxxx and 98PX1012 switches
- sms - added "status-report-request" parameter for "send" command
- sms - fixed handling of SMS send attempts on unsupported modems
- snmp - improved retrieval of routing related OID's
- snmp - improved stability when receiving bogus packets
- ssh - increased key generation timeout
- sstp - added VRF support for client
- supout - added tr069-client section
- supout - removed duplicate "bridge-controller" section
- switch - improved traffic forwarding at 5Gbps rate for 98DX8525, 98DX4310 switches
- system - renamed error messages when trying to edit or remove dynamic entries
- tile - improved system stability when processing packets
- tr069-client - do not allow ":" symbols in username
- tr069-client - fixed reporting of "X_MIKROTIK_MimoRSRP" parameter
- user-manager - accept any username for outer authentication
- user-manager - added "comment" parameter for batch user creation
- user-manager - added support for multiple accounting sessions
- user-manager - added variables to print profile name and end time in voucher templates
- user-manager - allow specifying router's address as subnet
- user-manager - fixed "migrate-legacy-db" command
- user-manager - fixed session expiry when it is stopped by Disconnect-Request
- user-manager - forced username verification against client's certificate for EAP-TLS
- user-manager - use "Class" attribute to associate user's accounting session
- user - removed unused "dude" policy
- vrrp - fixed connection tracking synchronization on MMIPS and MIPSBE devices
- vxlan - added IPv6 support for remote VTEPs (only IPv4 or IPv6 will be used at the same time, use "vteps-ip-version" property on VXLAN interface to change the version)
- w60g - improved system stability (introduced in v7.5)
- webfig - fixed creation of new IPv6 routes
- webfig - fixed displaying of "Last Seen" parameter under "IP/DHCP Server/Leases" menu
- webfig - fixed hex input for "Host Uniq" field
- webfig - fixed unsetting of "endpoint-address" parameter under "WireGuard/Peers" menu
- wifiwave2 - fixed enabling of unconfigured interfaces
- wifiwave2 - fixed malfunction of WPA3 hash-to-element technique when enabled on multiple interfaces
- wifiwave2 - fixed RADIUS accounting after fast-transition
- wifiwave2 - fixed "WPA Key Data Length" value in EAPOL frame when FT-EAP-SHA384 AKM is used
- wireguard - strip whitespaces from keys
- wireless - disallowed using "default" as scan list or channel names
- wireless - fixed incorrectly applied ingress priority to non-wireless packets
- wireless - fixed missing wireless interface on some RB921GS-5HPacD devices
- www - improved stability when receiving bogus packets
- x86 - improved ixgbe driver support

Windows:
- added "Active" prefix for current remote and local session ID fields for L2TP-Ether interfaces
- added "address-list" parameter under "IP/DNS/Static" menu
- added "File Name" option for "Load Config" parameter under "System/SwOS" menu
- added icon for TR069-client menu
- added MACsec support
- added quick filtering option for route list
- added "Rapid Commit" parameter support under "IPv6/DHCP-Server" menu
- added "Reset Traffic Counters" button for all interfaces
- added "type" and "status-report-request" parameters under "Tools/SMS" menu
- allow "timeout" value to be less than 1 under "Tools/Netwatch" menu
- allow to rename mounted disks
- changed order of tabs under "User Manager" menu
- changed "uptime" parameter format when using the wifiwave2 package
- do not show unavailable features on SMIPS devices
- fixed interface traffic graph drawing on RB5009
- fixed maximum allowed value for VRRP's "priority" parameter
- fixed "Session Uptime" value for not established sessions under "Routing/BGP" menu
- fixed "Session Uptime" value under "Routing/BGP" menu
- fixed "System/SwOS" window refreshing after changes are detected
- fixed "User Manager/User Profiles" window refreshing after changes are detected
- made "backup.swb" the default value for SwOS backup
- made sessions removable in "User Manager" menu
- show "F" flag for failed entries under "Interfaces/VRRP" menu
- show "Switch" menu on Chateau LTE18 ax
- show "System/Health" only on boards that have health monitoring
- show "System/RouterBOARD/Mode Button" on devices that have such feature